advertisement
▼
Scroll to page 2
of 12
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 PARTS LIST FOR WP-2400-0MTB (AFTER SERIAL #306632) Engine Oil Grade: Engine Oil Capacity: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: ©Copyright 2000, Mi-T-M Corporation® Above 40°F=SAE30/ Below 40°F=SAE10W-30 20 oz. Mi-T-M Pump Oil #AW-4085-0016 6.5 oz. 3.0 1 EX-9074-062800 Issue Date: 062800 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Cold Water Pressure Washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the power source. Turning over the machinery by hand during adjustment or cleaning might start the machinery, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. Table of Contents SPECIFICATIONS ......................................................................................................................................................................................................... 3 FRAME ASSEMBLY FOR WP-2400-0MTB .................................................................................................................................................................. 4 PUMP ASSEMBLY (3-0156) ......................................................................................................................................................................................... 6 GUN ASSEMBLY (16-0190) ......................................................................................................................................................................................... 8 NOTES .......................................................................................................................................................................................................................... 10 ©Copyright 2000, Mi-T-M Corporation® 2 EX-9074-062800 Issue Date: 062800 SPECIFICATIONS WP-2400-0MTB MODEL NUMBER WP-2400-0MTB Operating Pressure (PSI/Bar): 2400/165.5 High Pressure Nozzle: Water Volume (GPM/lpm): 3.0 2.4/9.8 Engine: Tecumseh Horsepower 5.5 Engine Type Oil Type 4 Stroke, Overhead Valve, Single Cylinder Above 40 F=SAE30/Below 40 F=SAE10W-30 Oil Capacity (oz./liters) Fuel Type 20/.6 Unleaded Gasoline 86 Octane Minimum Fuel Capacity (gallon/ liters) .75/2.9 Starting Recoil Maximum No Load RPM Pump: Oil Type 3600 (+/- 100) RPM Direct Driven, Oil Bath, Triplex Piston Mi-T-M Pump Oil #AW-4085-0016 Oil Capacity (oz./liters) 6.5/.19 Plungers Ceramic Coated Manifold Forged Brass Valves Unloader Stainless Steel Adjustable Heat Dump Valve Detergent Injector Unit Net Weight (lbs/Kg) Relieves heated water during unloader bypass stage Adjustable low pressure down stream from pump 78/35.5 Unit Shipping Weight (lbs/Kg) Unit Net Dimension (in/cm) Unit Shipping Dimension (in/cm) ©Copyright 2000, Mi-T-M Corporation® 90/40.8 30Lx21Wx26H/ 76Lx53.5Wx66H 30.5Lx21.5Wx26.5H/77.5Lx54.5Wx67.5H 3 EX-9074-062800 Issue Date: 062800 FRAME ASSEMBLY FOR WP-2400-0MTB 004 WP-2400-0MTB-052200-RD 2 ©Copyright 2000, Mi-T-M Corporation® 4 EX-9074-062800 Issue Date: 062800 WP-2400-0MTB-052200-RD FRAME ASSEMBLY FOR WP-2400-0MTB REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Decal- 2400 Die Cut 34-0772 1 26 Nut 30-0004 4 2 Decal- Warning/Caution/Operating (E/S) 34-0737 1 27 Adapter 23-0279 1 3 Decal- American Flag 34-0521 1 28 Filter 19-0001 1 4 Grommet 33-0001 5 29 Heat Dump Valve 22-0208 1 5 Frame 5-0123A20 1 30 Pump 3-0156 1 6 Isolator 14-0066 2 31 Key 43-0073 1 7 Washer 28-0021 2 32 Nozzle- 1503 18-0150 1 8 Screw 27-3096 2 - Nozzle- 2503 18-0303 1 9 Decal- Serial Number N/A 1 - Nozzle- 6540 18-0148 1 10 Decal- Data Plate N/A 1 33 Detergent Strainer 19-0050 1 11 Decal- Clear Laminate N/A 1 34 Detergent Hose *(Four Feet Required) 15-0021 1 12 Decal- Technical Service Number 34-0603 1 35 Pressure Hose 15-0169 1 13 Brace 19-0119A20 2 36 Gun/Wand Assembly (Inc. 37-42) 851-0245 1 14 Axle Spacer 20-0313A01 2 37 Gun Assembly 16-0190 1 15 Washer 28-0008 5 38 Protective Cover 62-0091 1 16 Wheel 14-0080 2 39 Insulated Lance 16-9001 1 17 Hubcap 33-0018 2 40 Hand Wheel 16-0303 1 18 Bolt 27-0070 4 41 Plug 23-0267 1 19 Washer 28-0003 8 42 O-ring 25-0291 1 20 Locknut 30-0157 4 43 Lance Assembly (Inc. 44-46) 851-0292 1 21 Engine- 5.5 H.P. Tecumseh 1-0092 1 44 Adapter 23-0266 1 22 Decal- Warning: Muffler is Hot (E/S) 34-0598 1 45 Insulated Lance 16-9003 1 23 Decal- Caution: Allow to Cool (E/S) 34-0599 1 46 Quick Connect Socket 17-0001 1 24 Stud 27-8889 4 47 O-ring (Replacement) 25-0122 - 25 Lockwasher 29-0007 4 ©Copyright 2000, Mi-T-M Corporation® *Must Order in One Foot Lengths 5 EX-9074-062800 Issue Date: 062800 3-0156-052200-RD PUMP ASSEMBLY (3-0156) ©Copyright 2000, Mi-T-M Corporation® 6 EX-9074-062800 Issue Date: 062800 3-0156-062700-RD PUMP ASSEMBLY (3-0156) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION N/A 1 34 O-ring (See 70-0231) N/A Sep. 3 67 Inlet Connector N/A 1 35 V-Packing Retainer 46-0807 3 68 Garden Hose Connection 23-0304 1 48-0074 1 36 V-Packing Assembly (See 70-0231) N/A Sep. 3 69 Screw 27-8822 2 1 37 Valve Plug 46-0628 6 70 Manifold 46-0829 1 1 Oil Seal 2 Snap Ring 3 Bearing 4 Vent Plug 46-0634 PART # 46-0808 QTY. 1 5 Piston Oil Vent N/A 1 38 O-ring 25-0359 6 71 Manifold Plug 39-0072 1 6 O-ring 25-0230 2 39 Valve Complete (Inc. 40-43) (See 70-0235) N/A Sep. 6 72 O-ring 25-0273 1 7 Cage Oil Vent (See 46-0634) N/A Sep. 1 40 Valve Cage (See 70-0235) N/A Sep. 6 73 Screw 27-8198 1 8 O-ring (See 46-0634) N/A Sep. 1 41 Valve Spring (See 70-0235) N/A Sep. 6 74 Bolt 27-8479 4 9 Spring Oil Vent (See 46-0634) N/A Sep. 1 42 Valve Plate (See 70-0235) N/A Sep. 6 75 Lockwasher 29-0155 4 10 Oil Fill Tube 46-0748 1 43 Valve Seat (See 70-0235) N/A Sep. 6 76 Back-up Ring 25-0247 2 11 Gasket 46-0779 1 44 O-ring 25-0335 6 77 Piston By-Pass 46-0423 1 12 Flange 38-0060 1 45 Screw 27-8821 2 78 Pressure Regulator Pin (See 70-0120) N/A Sep. 1 13 O-ring 25-0243 1 46 Valve Seat 46-0409 1 79 Roll Pin 46-0421 1 14 Washer 48-0035 2 47 Ball 46-0394 1 80 Back-up Ring 25-0246 1 15 Bearing 48-0030 1 48 Valve Spring 46-0411 1 81 Plug (See 70-0120) N/A Sep. 1 16 Shaft 46-0939 1 49 O-ring 25-0255 3 82 Washer 46-0624 1 17 Plug 39-0082 1 50 Plug 46-0412 1 83 Pressure Regulation Spring 49-0109 1 18 Rear Bearing Disc 48-0047 1 51 O-ring 25-0334 1 84 Washer 46-0648 1 19 Bearing 48-0048 1 52 No Return Valve 46-0626 1 85 Pressure Regulation Screw 46-0623 1 20 Front Bearing Disc 48-0049 1 53 Spring 49-0110 1 86 Screw Support 27-8853 1 21 Pump Housing 46-0806 1 54 Injector Body 46-0620 1 87 Bolt 27-8810 1 22 Piston Spring Retainer 46-0362 3 55 Injector Nozzle 46-0415 1 88 Internal Screw 27-8852 1 23 Piston 46-0578 3 56 O-ring 25-0263 2 89 Pressure Regulation Knob 24 Piston Spring 49-0081 3 57 Pressure Outlet 46-0941 1 90 Screw 25 O-ring 25-0255 1 58 Spring (See 70-0005) N/A Sep. 1 91 Cap 26 Oil Sight Glass 46-0735 1 59 Ball (See 70-0005) N/A Sep. 1 Oil Drain Plug (Inc. 27, 28) 70-0083 27 Gasket 26-0168 2 60 O-ring (See 70-0005) N/A Sep. 1 Oil Seal (Inc. 3 each 32) 70-0001 28 Oil Drain Plug 39-0065 1 61 Injector Nipple 46-0417 1 Unloader Seat (Inc. 6, 46-50) 70-0110 29 Lockwasher 29-0154 4 62 Injector Spring 49-0088 1 Unloader Stem (Inc. 6, 49, 63, 76-91) 70-0120 30 Bolt 27-8194 4 63 O-ring (See 70-0120) N/A Sep. 2 Injector Assembly (Inc. 49, 51-66) 31 Plug 39-0098 1 64 Injector Piston 46-0418 1 Injector Repair (Inc. 58-60, 63) 32 Oil Seal (See 70-0001) N/A Sep. 3 65 Flexible Ring 25-0277 1 V-Packing Kit (Inc. 3 each 33, 34, 36) 70-0231 33 O-ring (See 70-0231) N/A Sep. 3 66 Inejector Regulation Knob 46-0469 1 Valve Kit (Inc. 6 each 38, 39) 70-0235 ©Copyright 2000, Mi-T-M Corporation® 7 7-0091 1 27-8086 1 7-0088 1 70-0005 852-0056 EX-9074-062800 Issue Date: 062800 16-0190-110399-RD GUN ASSEMBLY (16-0190) ©Copyright 2000, Mi-T-M Corporation® 8 EX-9074-062800 Issue Date: 062800 16-0190-110399-RD GUN ASSEMBLY (16-0190) REF. # DESCRIPTION PART # 1 Screw 27-8382 7 2 Plastic Housing (Left Side) 16-0336 1 3 Housing-Brass 23-0295 1 4 Pipe 21-0095 1 5 Nipple 23-0173 1 6 Trigger Safety Lock 16-0332 1 7 Trigger Rest 16-0333 1 8 Trigger 16-0335 1 9 Trigger Pin 43-0069 1 10 Plastic Housing (Right Side) 16-0334 1 11 Plug (See 70-0057) N/A Sep. 1 12 O-ring (See 70-0057) N/A Sep. 1 13 Spring (See 70-0057) N/A Sep. 1 14 Ball (See 70-0057) N/A Sep. 1 15 Seat (See 70-0057) N/A Sep. 1 16 O-ring (See 70-0057) N/A Sep. 1 17 Pin (See 70-0057) N/A Sep. 1 18 Washer (See 70-0057) N/A Sep. 1 19 O-ring (See 70-0057) N/A Sep. 1 20 Back-up Ring (See 70-0057) N/A Sep. 1 Repair Kit (Includes 11-20) ©Copyright 2000, Mi-T-M Corporation® QTY. 70-0057 9 EX-9074-062800 Issue Date: 062800 NOTES ©Copyright 2000, Mi-T-M Corporation® 10 EX-9074-062800 Issue Date: 062800 NOTES ©Copyright 2000, Mi-T-M Corporation® 11 EX-9074-062800 Issue Date: 062800 ©Copyright 2000, Mi-T-M Corporation® 12 EX-9074-062800 Issue Date: 062800
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project