PixController Raptor Wireless System Firmware Update Manual

The Raptor Wireless System is a versatile and powerful wireless camera system that allows you to capture high-quality video and audio from remote locations. This manual will guide you through the process of updating the firmware on your Raptor system to ensure optimal performance and compatibility.

PDF Download
Document
PixController Raptor Wireless System Firmware Update Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Wireless operation
  • High-quality video and audio recording
  • Remote control capabilities
  • Firmware upgradable
  • Compatibility with various software and applications

Frequently asked questions

First, you will need to purchase a Serial to USB cable. Connect the cable to your PC and power up the Raptor system. Press the "Up" and "Down" menu key buttons simultaneously. You will see the message "PIX BOOTLOADER" on the LCD display. Run the ds30 Loader software and load the .HEX file for the firmware update. Press the "Download" button to install the firmware on your Raptor system. Do not power down the Raptor system or unplug the cable until the firmware update is complete.

Firmware updates are available from http://www.pixcontroller.com/downloads.htm

We suggest the Gigware Model: 26-949 Serial to USB cable or similar. The Gigware cable can be purchased on-line or at your local RadioShack store.
Preparing document for printing…
0%