ROUSH Engraved Sill Plate Kit Installation Instructions

ROUSH Engraved Sill Plate Kit Installation Instructions
ROUSH Engraved Sill Plate Kit
Installation Instructions
Application: 2005-10 Ford Mustang/GT
Before installing your ROUSH Performance Product(s), read through the entire
installation procedure and check to make sure all items are present. Contact ROUSH
Customer Service at 1-800-59-ROUSH, weekdays from 9:00 AM to 5:00 PM EST, with
any questions regarding fit, missing parts or instructions that are unclear to you.
Packaging List for ROUSH Engraved Sill Plate Kit
Description
ROUSH Engraved Sill Plate
Installation Instructions
1306-R08060014-AA
Page 1 of 5
ROUSH Part Number
Quantity
R08060013
R08060014
2
1
1-800-59-ROUSH
LIMIT OF LIABILITY STATEMENT
The information contained in this publication was accurate and in effect at the time the
publication was approved for printing and is subject to change without notice or liability.
ROUSH Performance Products (RPP) reserves the right to revise the information
presented herein or to discontinue the production of parts described at any time.
SAFETY REQUIREMENTS
STOP! READ IMPORTANT SAFETY CAUTIONS AND WARNINGS BEFORE
PROCEEDING.
IMPORTANT SAFETY NOTICE
Appropriate disassembly, assembly methods and procedures are essential to ensure the
personal safety of the individual performing the kit installation. Improper installation
due to the failure to correctly follow these instructions could cause personal injury or
death. Read each step of the installation manual carefully before starting the actual
installation.
1.
2.
3.
4.
Always wear safety glasses for eye protection.
Place ignition switch in the OFF position.
Always apply the parking brake when working on a vehicle.
Block the front and rear tire surface to prevent unexpected vehicle
movement.
5. If working without a lift, always consult vehicle manual for correct lifting
specifications.
6. Operate the engine only in well-ventilated areas to avoid exposure to carbon
monoxide.
7. Do not smoke or use flammable items near or around the fuel system.
8. Use chemicals and cleaners in well-ventilated areas.
9. Batteries produce explosive gases, which can cause personal injury.
Therefore, do not allow flames, sparks or flammable substances to come
near the battery.
10. Keeps hands and any other objects away from the radiator fan blades.
11. Keep yourself and your clothing away from moving parts when the engine is
running.
12. Do not wear loose clothing or jewelry that can get caught in rotating parts or
scratch surface finishes.
13. Allow the engine, cooling system, brakes and exhaust to cool before working
on a vehicle.
WORK SAFELY!
Perform this installation on a good clean level surface for maximum safety and
with the engine turned off.
1306-R08060014-AA
Page 2 of 5
1-800-59-ROUSH
INSTALLATION:
1. Clean the factory sill thoroughly around the “Mustang” Logo, using rubbing
alcohol in order to ensure a secure adhesion between the factory sill and the
ROUSH Sill Plate. (Refer to Figure A)
Figure A
2. Peel off the protective tape from the back of the ROUSH Sill Plate. (Refer to
Figure B)
Figure B
1306-R08060014-AA
Page 3 of 5
1-800-59-ROUSH
3. Align sill plate before pressing into place. (Refer to Figure C)
Figure C
4. Once aligned, press the ROUSH Sill Plate to the sill and apply a constant force
along all portions of the sill plate to provide a secure seal.
Important Note: Use a mild cleaner and soft cloth to maintain appearance.
1306-R08060014-AA
Page 4 of 5
1-800-59-ROUSH
Congratulations!!! You have completed the installation of the ROUSH Performance
Products, ROUSH Engraved Sill Plate Kit. It is recommended that you save all parts
removed from your vehicle during the installation of this kit.
WARRANTY
All retail parts carry a 90-day warranty from the date of purchase. This warranty covers
defects in materials or workmanship, and does not include (i) normal wear and tear,
environmental conditions, improper installation; (ii) road hazards, misuse, abuse,
neglect, accidents, collision, fire, theft, freezing, vandalism, riot, explosion, or objects
striking the vehicle; (iii) misusing the vehicle, such as driving over curbs, overloading,
racing, or using the vehicle as a stationary power source; (iv) altering, disassembling or
modifying the parts; (v) defects caused or induced by failures, breakdowns, or damage
by other parts, components or the vehicle; (vi) subjecting the parts to excessive
moisture or water or any motor vehicle fluids (e.g.: oil, anti-freeze, battery acid, brake
fluid, etc.); (vii) acts of God, natural disasters and other similar causes beyond the
reasonable control of ROUSH; or (viii) application of chemicals that affect the parts.
This Limited Warranty does not cover surface deterioration of paint, trim, and
appearance items that result from use and/or exposure to the elements, such as stone
chips, scratches, bird droppings, lightning, hail, windstorm, dings, dents, earthquake,
road salt, tree sap, water or flood.
ROUSH SHALL NOT BE LIABLE TO REIMBURSE CUSTOMER/DEALER FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION OR USE OF ANY
PRODUCT SOLD THROUGH THIS CATALOG OR ARISING OUT OF ANY BREACH OF
WARRANTY. EXCEPT AS MAY BE STATED IN THIS CATALOG, ROUSH DISCLAIMS ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
ROUSH’S LIABILITY EXCEED THE PRICE PAID BY CUSTOMER/DEALER FOR PRODUCTS
SOLD REGARDLESS IF ROUSH HAS BEEN ADVISED IN ADVANCE OF ANY POTENTIAL
PROBLEM OR IF A CLAIM IS BASED ON CONTRACT, TORT, STRICT LIABILITY,
PRODUCT LIABILITY OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF IMPLIED WARRANTIES OR THEIR DURATION, OR LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY.
1306-R08060014-AA
Page 5 of 5
1-800-59-ROUSH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement