7-501172 revA HandKey Datasheet FINAL.qxp 10/13/2005 9:38 AM Page 1 HandKey ™ Hand Geometry Readers The HandKey reader by Recognition Systems, Inc. utilizes field- proximity can store up to 512 cardholder templates in the unit. proven hand geometry technology that maps and verifies the The HandKey CR with an integrated OmniClass/iCLASS reader size and shape of a person’s hand in less than one second. stores cardholder templates on their cards, protecting cardholder privacy and eliminating the need to store and update The HandKey captures a three dimensional image of the hand using a 32,000 pixel image array. 90 measurements, including the lengths, widths, thickness and surface area of the fingers cardholder databases in individual HandKey CR readers. The storage of the template on the card allows the reader to support an unlimited number of cardholders. and hand are taken. An advanced algorithm determines the unique aspects of the hand and then generates a nine-byte hand The HandKey II provides the security and convenience you template. This template is then stored and used for subsequent need at a price you can afford, even when compared to comparisons. Dirt, cuts and abrasions on the hand have no cardbased systems. Because your hand is your card, HandKey impact on accuracy. II allows access only to authorized people without the hassles of a card or key. By eliminating cards, you reduce administrative The HandKey CR is specifically designed to work in conjunction with card based access control systems. This makes adding biometric security to critical access points fast, simple and costs while greatly increasing the level of security. Users appreciate the convenience of never worrying about keeping track of a card or key. seamless for both new and existing systems. The HandKey CR without integrated card reader and the HandKey CR with HID F E AT U R E S • When multiple HandKey units are linked together via RS-485 or Ethernet, the unit’s built-in template management system can be used to distribute hand imprints to other hand readers in the network. This allows users to enroll at one reader and then use other readers in the system without re-enrollment. • Integrated wall-mount design • Integrates into existing systems • Flexible storage of template on OmniClass/iCLASS cards eliminates need to maintain databases in individual readers • To ensure system integrity, a tamper switch is built into the reader. Tamper alarms and other conditions such as verification refused, lock out and duress can be monitored by the panel directly or through one of the HandKey’s two auxiliary outputs. • Card readers support 26-bit Wiegand with other data formats available 7-501172 revA HandKey Datasheet FINAL.qxp 10/13/2005 9:38 AM Page 2 HandKey ™ Hand Geometry Readers S P E C I F I C AT I O N S Description HandKey CR HG-4 HandKey CR HG4-PROX HandKey CR HG4ICLASS HandKey II HG4-II This reader stores templates for up to 512 users in the unit. This reader stores templates for up to 512 users in the unit and reads HID prox cards. This reader stores templates on an OmniClass/iCLASS smart card. This is a standalone unit for up to 512 users with 2 auxiliary and a door egress input, 3 auxiliary outputs. Dimensions 11.65" H x 8.85" W x 8.55" D (29.6cm H x 22.3cm W x 21.7cm D) Max. Read Range1 N/A 2" Card sits in holder Cable Distance to Host (Wiegand) Compatible Cards Number of Templates HID proximity 512 OmniClass / iCLASS 512 Template Size 512 200ma 170ma < 15 sec Equal Error Rate (EER) 0.1% False Acceptance Rate 0.1% False Rejection Rate 0.1% Custom Features FTE of 1 in 10,000 Verification Time less than 1 second Regulatory Approvals FCC, CE, UL 294 Operating Temperature 32° to 113° F (0° to 45° C) Operating Humidity 20 - 80% relative humidity Operating Voltage Range Current (@12VDC) 12 to 24VDC 170ma 200ma Tamper Built-in tamper switch Communications RS-485, RS-422 or Ethernet Output Interfaces Wiegand Warranty2 2 Unlimited 9 bytes Enrollment Time 1 BR-100 relay 1 year Actual operating distance will vary depending upon installation environment and proximity to metal. See Honeywell Systems Group’s Sales Policy for complete warranty details. ORDERING HG-4 HG4-PROX HG4ICLASS HG4-II HGEN200 HGDC104 HGHNR5 HGHNR25 HGHNRUNL HG4-EM801 HG4-EM-800 HG4-EM-803 HG4ENC1 N/A 500' (152m) max HandKey CR Hand Geometry Reader that stores 512 user templates HandKey CR Hand Geometry Reader that stores 512 user templates and reads HID Prox cards HandKey CR Hand Geometry Reader that stores user templates on OmniClass/iCLASS card HandKey II Hand Geometry Reader that stores 512 user templates for standalone use Ethernet Module RS-232 to RS-485 Interface with 120V Power Supply Handnet for Windows, 5 Reader Licenses Handnet for Windows, 25 Reader Licenses Handnet for Windows, Unlimited Reader Licenses Memory Expansion for software key for HG-4 and HG4-II units built after 2003, supports up to 9,728 users Memory Expansion EEPROM chip for HG-4 and HG4-II, supports up to 9,728 users Memory Expansion EEPROM chip for HG-4 and HG4-II, supports up to 32,512 users Hurricane Outdoor Enclosure with temperature range of -20° to 120° F (-29° to 49° C) when using internal heater option Dimensions: 14" H x 12" W x 10.5" D (35.6cm H x 30.5cm W x 26.7cm D) For more information: www.honeywellaccess.com Honeywell Systems Group 135 W. Forest Hill Avenue Oak Creek, WI 53154 414-766 -1700 414-766 -1798 Fax European Office Böblinger Straße 17 D-71101 Schönaich Germany 49-7031-637-782 49-7031-637-769 Fax www.honeywell.com 7-501172 revA October 2005 ©2005 Honeywell International Inc.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021