Mitel 5312 IP, 5324 IP IP Phone User Guide
Below you will find brief information for IP Phone 5312 IP, IP Phone 5324 IP. The Mitel 5312 and 5324 IP Phones are full-feature, dual port, dual mode telephones that provide voice communication over an IP network. Each features a back-lit liquid crystal display (LCD) screen, display-assisted access to features, on-hook dialing and off-hook voice announce with handsfree answerback, and a large ringing/message indicator. The 5312 IP Phone offers 12 programmable keys, and the 5324 IP Phone offers 24 programmable keys for one-touch feature access.
advertisement
▼
Scroll to page 2
of
46
advertisement
Key Features
- Full-featured IP phones
- Dual port, dual mode
- Back-lit LCD screen
- Display-assisted feature access
- On-hook dialing
- Off-hook voice announce with handsfree answerback
- Large ringing/message indicator
- Programmable keys
- Support for Mitel Call Control (MiNet) protocol and Session Initiated Protocol (SIP)
- Optional modules for added functionality
Frequently Answers and Questions
How do I make an emergency call on my phone?
There are two methods of dialing emergency numbers, based on the programming of your 3300 ICP. If Emergency Call Routing is NOT programmed, you must use the Line Interface Module to dial emergency calls. If Emergency Call Routing is programmed, you can dial your Local Emergency Number directly. Consult your local authorities for Emergency Numbers and 911 or equivalent service availability in your area.
How do I adjust the ringer volume?
To adjust the Ringer Volume while the set is ringing, press (UP) or (DOWN). To adjust the Ringer Pitch while the set is idle, press (MENU), press # or the No softkey until "Ringer Adjust?" appears, press * or the Yes softkey twice, press (UP) or (DOWN), and press (MENU).
How do I program a personal key as a Speed Call key?
You can store a Speed Call number by pressing (MENU), pressing # or the No softkey until "Personal Keys?" appears, pressing * or the Yes softkey, pressing a personal key that isn't a line key,pressing * or the Change softkey, dialing the number you want to store and then pressing the personal key again.
How do I use Handsfree operation?
To use Handsfree to make a call, dial the number and then press (SPEAKER). To use Handsfree operation to answer calls, press the flashing line key. To disable Handsfree operation, lift the handset. To return to Handsfree operation, press (SPEAKER) and then hang up the handset.
How do I place a call on hold?
To place a call on Hold, press (HOLD). To retrieve a call from Hold, lift the handset and press the flashing line key.
