11 - Chemicals

11 - Chemicals
Cleaning
and Chemicals
Contents
Page
Adhesives
Adhesive Accelerators. . . . . . . 1195
Adhesive Removers and
Solvents . . . . . . . . . . . . . . . . . 1195
Epoxy . . . . . . . . . . . . . . 1193, 1194
PCB Repair . . . . . . . . . . . . . . . 1195
Polyurethane Glue. . . . . . . . . . 1194
Rubberized Adhesives. . . . . . . 1193
Spray Adhesives. . . . . . . . . . . 1193
Super Glue. . . . . . . . . . . . . . . . 1192
Thermal Adhesives . . . . . . . . . 1194
Threadlocker. . . . . . . . . . . . . . 1194
Chemical Accessories
Chemical Dispensers. . . 1204, 1205
Chemical Safety. . . . . . . . . . . . 1206
Chemical Storage . . . . . 1205, 1206
Cleaning
Blowers. . . . . . . . . . . . . . . . . . 1212
Brooms. . . . . . . . . . . . . 1214, 1215
Cleaning Cards . . . . . . . . . . . . 1215
Dust Pans. . . . . . . . . . . . . . . . 1215
Funnels. . . . . . . . . . . . . . . . . . 1215
Plumbing Maintence. . . 1211, 1212
Ultrasonic Cleaners. . . . . . . . . 1215
Vacuums. . . . . . . . . . . . 1212~1214
Vent Cleaning . . . . . . . . . . . . . 1211
Contents
Page
Cleaning Chemicals
Acetone. . . . . . . . . . . . . . . . . . 1185
Alcohol . . . . . . . . . . . . . 1184, 1185
Appliance Cleaners . . . . . . . . . 1189
Automotive Cleaners. . . 1189, 1190
Carpet Cleaners. . . . . . . . . . . . 1189
Degreasers . . . . . . . . . . 1181~1184
Glass Cleaner. . . . . . . . . 1185, 1186
Hand Cleaners &
Lotion . . . . . . . . . . . . . . 1187, 1188
Label & Adhesive Remover. . . 1185
LCD Cleaner. . . . . . . . . . 1186, 1187
Musician Chemicals. . . . . . . . . 1188
Office & Electronics
Cleaners . . . . . . . . . . . . . . . . . 1187
Contact Cleaners
Cleaners/Lubricants. . . . . . . . . 1180
Contact Cleaners. . . . . . 1177~1179
Contact Cleaning Kits . . 1180, 1181
Contact Protectors. . . . . . . . . . 1180
Fader Cleaners. . . . . . . . . . . . . 1180
Duster & Freeze
Dusters. . . . . . . . . . . . . 1175, 1176
Freeze Sprays . . . . . . . . 1176, 1177
Greases
Conductive Grease. . . . . . . . . . 1196
Dialectric. . . . . . . . . . . . . . . . . 1196
Heat Sink Compounds. . 1196, 1197
Contents
Page
Lubricants. . . . . . . . . . . . . 1197~1199
Repair Chemicals
HVAC Chemicals. . . . . . . . . . . 1190
Projection TV Coolant. . . . . . . 1191
Rubber Keypad Repair Kits. . . 1190
Rubber Rejuvenators. . . . . . . . 1190
Sealants
Electrical Insulators. . . . . . . . . 1196
Rubber Coating. . . . . . . . . . . . 1196
Sealants. . . . . . . . . . . . . . . . . . 1195
Soldering Chemicals
Conductive Epoxy. . . . . . . . . . 1200
Conductive Pens. . . . . . . . . . . 1202
Conformal Coating. . . . . 1202, 1203
Flux. . . . . . . . . . . . . . . . . . . . . 1200
Flux Dispenser. . . . . . . . . . . . . 1201
Flux Removers. . . . . . . . 1201, 1202
SMD Rework. . . . . . . . . . . . . . 1203
Solder Mask . . . . . . . . . . . . . . 1203
Soldering Paste. . . . . . . 1203, 1204
Tip Tinner . . . . . . . . . . . . . . . . 1204
Static Chemicals
ESD Mat Cleaners. . . . . . . . . . 1191
Static Control Chemicals. . . . . 1191
Swabs, Wipes, & Brushes
Brushes. . . . . . . . . . . . . 1210, 1211
Lens Cleaning. . . . . . . . . . . . . 1211
Swabs. . . . . . . . . . . . . . 1206, 1207
Wipes . . . . . . . . . . . . . . 1207~1209
Duster and Freeze - Cleaning
and Chemicals
11
Dusters
NEW!
Ultrajet® 70
Eco-Duster
Envi-Ro-Tech® Duster
✔Regular velocity
✔Nonflammable
Formulated with HFC-134a, this
exceptionally pure, moisture free,
inert gas removes particles without
the use of harmful solvents. Zero
ozone depleting. CA customers:
For use on energized equipment only.
✔High power
✔Nonflammable
•Eco friendly duster is formulated with
HFO-1234ze propellant which has a
fraction of the global warming potential
(GWP) of other HFC-134a based
dusters •Non-flammable •Zero residue
and no odor •Low toxicity •Non-ozone
depleting •10 oz. can •Mfr. #1580-10S
MCM Part #
20-5490
High power duster provides the extra
strength needed in many cleaning and
dusting applications. High power spray
nozzle provides up to 70 PSI. Ideal for office
equipment, PC boards, telecommunications
and A/V equipment. Nonflammable, moisture
free formulation leaves no residue and has no
ozone depleting compounds. Removes dust,
dirt and other particles without scratching surfaces.
CA customers: For use on energized equipment
only. •10 oz. can •Mfr. #ES1015
ONLY
$18.69
MCM Part # Mfr. #
Size (1-5) (6-11) (12-23) (24-up)
20-2205
1671-10S 10 oz. $7.99 $7.79 $7.59 $7.49
20-2206
1671-15S 15 oz. 12.99 12.49 12.29 11.99
MCM Part #
20-2630
(1-5)
$14.99
(6-11)
$14.54
(12-23) $14.39
(24-up)
$14.10
152a Duster
Economy Duster
4Regular velocity
4Warning: Flammable
•Blasting power for quick dust removal
•Non-ozone depleting •Moisture free
gas •Odorless •HFC-152a •Not to be
used around open flames or sparks
•Mfr. #1673-10S
•The economical regular strength general
purpose duster •Removes dust, dirt and
other dry contaminants •63 psig at 70°F
•Warning: Flammable •Ozone safe •Great
for use on audio, video, office, and security
cleaning •10 oz. can •Mfr. #ES1027
MCM Part #
20-4468
(1-11)
$6.49
(12-23)
$6.33
Ultrajet® Duster System
✔Refillable
✔Super high power
✔Nonflammable
(24-up)
$5.96
High pressure duster cleans
electronics without scratching
delicate surfaces. Delivers 82
PSIG at 77°F. Removes dirt, dust
and dry contaminants and
is ultra pure, leaves no
residue. CFC/HCFC free,
contains no ozone depleting
compounds. May be used on energized equipment.
Idea for keyboards, circuit boards, surface mount
devices, components and video equipment. #20-1840
Kit includes: Rigid 4" stainless steel nozzle, surgical
grade chrome trigger valve, 36" extension hose
and 10 oz. refill can. •10 oz. aerosol
MCM
Part # Description (1-11) (12-23)(24-up)
20-4410 10 oz. can $5.99 $5.85 $5.63
20-4412 Case of 12 64.99
-
10 oz. cans
Ultrajet®
✔Super high power
✔Nonflammable
Vortex™ High Velocity Duster
✔High power
✔Nonflammable
Vortex™ is a high volume, high velocity
duster for blasting contamination from
surfaces. Formulated 100% with HFC134a, Vortex™ duster is non-flammable,
safe on plastics, and non-ozone
depleting. CA customers:
For use on energized equipment
only. •10 oz. can •Mfr. #1697-10S
MCM Part #
20-3550
(1-11)
$11.99
(12-23)
$11.44
(24-up)
$11.36
Vortex 360° High
Velocity Duster
™
4Sprays from any direction
4High power
4Nonflammable
The pure, moisture-free, inert gas quickly
dislodges dust and particles from hard-toreach areas. Formulated 100% with HFC134a, Vortex™ duster is non-flammable,
safe on plastics, and non-ozone depleting.
CA customers: For use on energized
equipment only. •8 oz. can •Mfr. #1697-8S
MCM Part #
20-3555
(1-11)
$11.99
(12-23)
$11.45
(24-up)
$10.91
•The duster with the biggest blast
to clean anything fast •Safe on plastics
•Nonflammable •10 oz. bottle •Extra
cleaning strength •Ozone safe, CFC/HCFC
free •100% ultra-pure HFC-134a leaves no
residue •CA customers: For use on energized
equipment only •Mfr. #ES1020
MCM Part #
20-1835
(1-5)
$16.29
(6-11)
$16.19
(12-23)
$16.09
(24-up)
$15.99
Description
MCM Part # Mfr. #
(1-5) (6-11) (12-23) (24-up)
Complete Ultrajet Kit
20-1840
ES1020K $49.99 $47.59 $45.99 $43.94
10 oz. 82 PSIG refill
20-1830
ES1020R 20.99 19.63 18.15 17.54
Duster
✔Regular velocity
✔Nonflammable
General purpose duster is ideal for office
equipment, PC boards, telecommunications
and A/V equipment. Nonflammable,
moisture free formulation leaves no residue
and has no ozone depleting compounds.
Removes dust, dirt and other particles
without scratching surfaces. CA
customers: For use on energized
equipment only
MCM Part #
20-2620
20-2622
20-2625
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
Mfr. # Size (1-5) (6-11) (12-23) (24-up)
ES1217 8 oz. $12.99$12.29 $11.79 $10.83
ES1017 10 oz. 9.99 9.89 9.74 9.57
ES1617 12 oz. 19.99 17.99 16.99 16.59
152A Blast
✔High power
✔Warning: Flammable
•The economical extra-strength general
purpose duster •Removes dust, dirt and
other dry contaminants •63 psig at 70°F
•Flammable •Ozone safe •Great for use on
audio, video, office, security, and general
cleaning •10 oz. can •Mfr. #ES1029
MCM Part #
(24-up)
20-4466
(1-11)
(12-23)
$10.79
$10.25
www.MCMelectronics.com /1-800-543-4330
$9.79
1175
11
Cleaning and Chemicals - Duster and Freeze
Ultrajet® All–Way
✔Spray from any direction
✔High power
✔Nonflammable
Duster
•Quickly remove dust from surfaces and
equipment •Economical •152a propellant
•Non-ozone depleting •Moisture free
•10 oz. can •Mfr. #CCS-2000
The duster that sprays in any direction with
the biggest blast to clean anything fast.
All–Way spray can be sprayed in any
direction without the risk of dispensing a
liquid spray that can freeze or damage
sensitive surfaces and removes dust, dirt
and other dry contaminants from all kinds
of surfaces. Safe on plastic. Extra cleaning
strength. Ozone safe, CFC/HCFC free. 100%
ultra–pure HFC–134a, leaves no residue.
•8 oz. can •Mfr. #ES1620.
MCM Part #
20-2995
MCM Part #
20-2222
(1-5)
$5.99
(6-11)
$5.69
(12-up)
$5.41
Freez-It Antistat
Provides the same benefits and performance
as Freez-It®, and also provides static
protection for sensitive components.
Also CFC/HCFC free.
MCM Part # Mfr. # Size (1-5) (6-11) (12-23) (24-up)
20-1845
ES1051 10 oz. $21.99 $21.33 $21.12 $20.70
20-2615
ES1551 15 oz. 29.99 29.29 28.39 27.85
ONLY
$18.99
NEW!
DustALL™ Pro
•Professional grade duster quickly
removes dust, dirt and other particles
from keyboards, computers, cameras
and more •Non-flammable •Non-ozone
depleting •Moisture-free •Easy
spray trigger valve •Size: 10 oz.
•Mfr. #CCS-2100
MCM Part #
200-515 ONLY
$6.99
Arctic Freeze Sprays
Freeze Sprays
Typhoon Dusters
•Typhoon Blast™ and Surge™ are ultra-low
GWP dusters designed to minimize the use of
global warming products and still provide high
cleaning strength •Formulated with HFO-1234ze
which has lower global warming potential (GWP)
than other dusters •Safe on plastics •Non-Flammable
•Low toxicity •Ozone safe •#20-5125 is an economical
version of the Blast™ duster
MCM Part # Mfr. #
Size
20-5110
ES1024 10 oz.
20-5115
ES1624 8 oz.
20-5120
ES1025 10 oz.
20-5125
ES1026 8 oz.
Description
Blast™ duster
Blast™ All-way
spray duster
Blast™ Hi power
spray duster
Surge™ duster
NEW!
•Delivers a concentrated blast of
compressed air that cleans dust, dirt
and debris from sensitive electronics
and hard-to-reach areas •Ideal for
cleaning keyboards, fax machines,
printers and copiers, as well as being a
great way to dust shelves, blinds, ceiling
fans and collectibles •No residues
•Odorless •Non-ozone depleting •10 oz.
can with extension tube •Mfr. #1001
1176
19.99
✔Wide spray
Economical, general purpose freeze spray
with a wide spray for cooling entire PC
boards. Safe on plastics. Nonflammable.
Ozone safe, CFC/HCFC free. •10 oz. can
•12 cans per case •Mfr. #ES1052.
MCM Part #
20-3000
(1-5)
$9.99
ONLY
$3.99
MCM Part # Mfr. # Size
20-5130
ES1054 10 oz.
20-5135
ES1055 10 oz.
20-5140
ES1056 10 oz.
Description
ONLY
Blast™ freeze spray $19.99
Blast™ Antistat 23.19
freeze spray
™
Storm wide spray 16.99
freeze spray
(6-11)
$9.89
15.49
NEW!
Eco-Freezer Freeze Spray
Freez-It®
Duster
MCM Part #
20-2224
ONLY
$19.49
18.99
Freeze Spray
•Arctic Blast™ and Storm™ are ultra-low
GWP freeze sprays designed to minimize the
use of global warming products while quickly cooling
surfaces •Formulated with HFO-1234ze which has
lower global warming potential (GWP) than other
freeze sprays •Rapidly cools components to -49°F
•Safe on plastics •Non-Flammable •Low toxicity
•Ozone safe •#20-5130 and 20-5135 freeze sprays offer
pinpoint spray to isolate components •#20-5135 is
anti-static formulation for static sensitive components
Circuit refrigerant ideal for locating
thermal intermittent components.
Quickly lowers temperature to -60°F
(-51°C). Ultra pure formulation is non
abrasive and leaves no residue. CFC/
HCFC free, contains no ozone depleting
compounds. Use to locate thermal
intermittent components, test for
trace continuity or provide heat sink
protection during soldering or desoldering.
Also effectively hardens adhesives
for easy removal
•Eco friendly freeze spray is formulated
with HFO-1234ze propellant which has a
fraction of the global warming potential
(GWP) of other HFC-134a based freeze
sprays •Non-flammable •Zero residue
and no odor •Low toxicity •Non-ozone
depleting •10 oz. can •Mfr. #1583-10S
MCM Part #
20-5495
ONLY
$20.99
MCM Part # Mfr. # Size (1-5) (6-11)(12-23)(24-up)
20-1785
ERS1050 10 oz. $18.99$18.42$18.24 $17.88
20-2610
ES1550 15 oz. 31.99 30.79 29.48 27.46
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
Contact Cleaners - Cleaning
Envi-Ro-Tech Freezer
Envi-Ro-Tech
Anti-Static Freezer
✔Nonflammable
HFC-134a based, rapidly evaporating liquid
chills to -62°F, is nonflammable and zero
ozone depleting. Used for troubleshooting
thermally intermittent components and cold
solder joints. Also effective on cracked PC
boards and oxidized junctions. •10 oz. can
MCM Part # Mfr. #
Size (1-5) (6-11) (12-23)(24-up)
20-2200
1672-10S 10 oz.$9.99 $9.69 $9.59 $9.40
20-2202
1672-15S 15 oz.18.99 18.42 18.24 17.88
✔Static free
✔Nonflammable
Has the same characteristics as the 1672
Freezer, with an anti-static agent added.
Ideal in ESD sensitive service applications.
•Mfr. #1747-105C.
MCM Part #
20-2210
(1-5)
$19.99
(6-11)
$19.79
(12-23)
$19.59
(24-up)
$19.20
and Chemicals
11
6 oz. Rid-Ox
•Enhances conductivity •Prevents
oxidation •Cleans, seals, and protects
•Safe on most plastics •Non-ozone
depleting •Rid-Ox formulated as a surface
cleaner/preservative and is ideal for
lubricating and protecting surfaces from
further oxidation •Rid-Ox is used as a
general treatment for connecters, contacts,
and other metal surfaces. •Mfr. #2112-6S
MCM Part #
20-3295
(1-11)
$17.99
(12-23)
$17.33
(24-up)
$16.76
Contact Cleaners
Contact Cleaner G3™
DeoxIT® Contact
Cleaner and Rejuvenator
4Nonflammable
•Improves the performance and reliability
of all equipment and parts •Active
ingredients chemically dissolve surface
contamination (oxides and sulfites) without
harm to plastics •Increases conductivity
•Does not require solvents •No waste and no
ozone depletion-safer for the environment
•Seals and protects surfaces •Hundreds of uses
on audio/video equipment, batteries, medical
equipment, connectors, communication networks, and more
•Includes arcing and external RFI inhibitors •Temperature range:
-30°~392°F •Nonflammable sprays: #200-230 and 200-236
MCM Part #
200-040
200-230
200-236
200-195
200-150
200-050
200-320
200-055
200-060
200-070
Mfr. #
D5S-6
DN5S-6N
DN5MS-15
DP5S-6
D100S-2
D100P
K-D1W-25
D50W
D100L-2DB
D100L-25C
Size
5 oz.
5.75 oz.
0.5 oz.
5 oz.
2 oz.
0.2 oz.
25 wipes
50 wipes
0.25 oz.
0.845 oz.
Applicator
Aerosol spray
Aerosol spray
Aerosol spray
Pump spray
Pump spray
Pen
Presaturated wipe
Presaturated wipe
Vial with brush
Bottle with needle
Solution
5%
5%
5%
25%
100%
100%
100%
100%
100%
100%
(1-3)
$12.99
22.99
8.99
21.99
18.99
15.99
13.99
17.99
14.69
24.49
E-Line
Contact Cleaner
™
Val-U Contact
Cleaner Wash
✔Safe on plastics
•Clean switches, relays, contacts,
connectors, parts, and components
•Safe on most plastics •Evaporates
quickly with no residue •Adjustable
flow valve •Ozone safe •Flammable
•10 oz. aerosol •Mfr. #DCC-V510
MCM Part #
200-360
(1-5)
$6.99
(6-11)
$6.83
(12-up)
$6.49
Ideal for switches, relays, contact pads,
and other electrical connections Features:
•Safe on plastics •Non-corrosive •Rapidly
evaporating •Zero residue •Non-ozone
depleting •10 oz. can •Mfr. #1622-10S
MCM Part #
20-2115
ONLY
$13.99
Contact Cleaner II
Blended HCFC-225 is an excellent contact
cleaner which offers low ozone depletion
potential and low surface tension for rapid
penetration. Ideal for precision cleaning
and degreasing. Nonflammable and safe
on plastics used to house switches and
relays. Removes greases, oils, silicones,
dirt and grime from contacts and
pads. •8 oz. can
Contact Cleaner
Cleans and restores relays, controls,
switches, attenuators and thermostats on
electronic equipment. Leaves no residue
and will not harm plastics or insulators.
Not for use on energized equipment.
•9 oz. •Mfr. #11118
MCM Part #
20-2005
(1-5) $7.39
(6-11) $7.09
(12-23) $6.79
(24-up)
$6.49
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-2320
$24.99 $23.99 $22.84 $22.25
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
(4-up)
$11.69
21.37
8.54
20.89
18.04
14.39
13.29
16.19
13.22
22.04
Contact Cleaner G3™ contains a
patented formula designed specifically
as the replacement for contact cleaners
containing HCFC-141b. This precision
blend is the choice for all types of
cleaning of switches, relays, contact
pads, and other electrical connections.
The innovative cleaner removes oils,
greases, silicones, dirt, and grime.
Contact Cleaner G3™ is an excellent
choice for all contact cleaning applications.
Features: •Non-ozone depleting •Non-flammable
•Safe on most plastics •Rapidly evaporating •Zero
residue •16 oz. can •Mfr. #1632-16S
MCM Part #
20-3945
(1-11)
$27.99
(12-23)
$27.44
(24-up)
$25.57
Pow-R-Wash® PR
✔Safe on plastics
✔Warning: Flammable
✔High dielectric breakdown
Safe for use on most plastics. Removes
grease, dirt, oil, carbon and oxidation and
restores continuity of contacts and switches.
Fast drying formula leaves no residue. Not
for use on energized equipment. •10 oz. can
•Mfr. #ES1605
MCM Part #
20-2090
(1-11)
$15.49
(12-23)
$15.07
(24-up)
$14.56
12oz. Pow-R-Wash® CZ
✔Safe on plastics
✔Nonflammable
Rapidly removes oils, carbon soils, greases,
and oxides. Low surface tension flushes
tight tolerance areas clean. Evaporates
quickly and leaves no residue. May be used on
energized equipment. Safe for use on most
plastics. Recommended for every phase of
electronics and electrical contact
maintenance including metal contacts,
plastic embedded contacts, potentiometers,
control points, PC boards, relays, circuit breakers,
connecters, and fuse blocks. 12 oz. can. •Mfr. #ES7300
MCM Part #
20-2345
(1-11)
$54.99
www.MCMelectronics.com /1-800-543-4330
(12-23)
$53.89
(24-up)
$52.27
1177
Contact Cleaners - Cleaning
#108-4605
Power-Wash NR
®
Novec™ Cleaners
✔High dielectric breakdown
✔Nonflammable
This regular-strength, contact cleaner
quickly removes soils and oxides. Features:
•Nonflammable •Regular cleaning strength
•Contains n-propyl bromide •Dielectric
breakdown 23 kV •Dries fast •Leaves no
residue •Test on plastics •141b free Typical
applications include: •Cleans oxidized oils
and grease from live switches and relays •Removes
carbon and oxide dust from live wire assemblies
•Cleans soils from live controllers and equipment
12 oz. can •Mfr. #ES1613
MCM Part #
20-4055
(1-11)
$18.49
(12-23)
$17.57
(24-up)
$16.78
•Contact cleaner lube
penetrates and flushes away
light oils and greases from
electronic equipment and
leaves a protective silicone
coating •Contact cleaner
removes fluorinated oils and
greases, light oils and silicones, dust and particulates
from sensitive electronic equipment •Contact cleaner
plus removes stubborn oils, grease and silicones,
as well as fluorinated oils and greases, dust
and particulates from electronic equipment
MCM Part #
108-4605
108-4185
108-4610
Mfr. #
051138-99073
051135-71699
051135-71864
Description
12 oz. cleaner lube
11 oz. cleaner
11 oz. cleaner plus
✔Extra strength cleaning
✔Nonflammable
(12-23)
$34.78
Precision-V Plastic Safe Cleaner
•Effective defluxer, contact cleaner,
and degreaser •Safe on almost any plastic,
including ABS, plexiglass, and lexan
•Rapid evaporation that leaves no residue
•Non-flammable •Non-ozone depleting
•Low VOC •10 oz aerosol •Mfr. #1652-10S
MCM Part #
20-4660
ONLY
$32.79
(24-up)
$33.74
•Cleans and degreases delicate precision
mechanisms •Penetrating action removes
oil, grease, dirt, flux and other
contaminants •Ideal for electronic
and fine parts •Safe on plastics
•11 oz. can •Mfr. #05416
•Quickly cleans fiber optic end-faces and
connectors •One-step buffer gel removal
•Safe on plastics •Flammable •Extra
cleaning strength •Ozone safe •Dries
fast •Leaves no residue •Use with QbE
fiber optic cleaning system or Coventry™
Econowipes™ wiper •5 oz. can •Mfr.
#ES810
MCM Part #
20-4775
ONLY
$19.49
ONLY
$10.99
NoFlash®
Electro Contact Cleaner
4Nonflammable
•The economical, non-ozone depleting,
contact cleaner safe for use on live circuits
Features: •Regular strength •Ozone safe
•Test on plastics •Removes encrusted oxides,
dirt, carbon, and other contaminants from
contacts Applications include: •All repair
and maintenance contact cleaning
•Cleaning of metal contacts, plugs, and
sockets, solenoids, potentiometers, and
rheostats •Removing oxidized soils from switches,
relays, circuit breakers, motors and armatures
•12 oz. can •Mfr. #ES6300
•A non-conductive, non-flammable
precision cleaner that is safe to use
on most surfaces, but may be harmful
to some plastics •Useful for cleaning
contacts, controls, circuit breakers,
meters and much more •Unique
alternative to HCFC cleaners •Does
not contain chlorinated solvents
•Fast evaporation •Quick penetration
•No residue •Inverta spray valve
lets you spray in an upright or
inverted position •12 oz. can
MCM Part #
20-4190
MCM Part #
20-5360
(12-23)
$22.22
(24-up)
$21.17
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$33.49
ONLY
$12.99
Electra-X Contact Cleaner
•Quick penetrating cleaner removes
oil, grease and dirt from electrical and
electronic parts •Safe on most surfaces
but may be harmful to some plastics
•Non-flammable •Fast evaporating
•Non-conductive •Contains no HCFCs
•No residue •Inverta spray valve lets
you spray in an upright or inverted
position •12 oz. can
MCM Part #
20-5375
Pow-R-Wash® VZ
(1-11)
$23.49
ONLY
$24.99
•A fast evaporating contact cleaner
that removes dirt, dust, flux and
other contaminants •Ideal for
use on electronics and fine parts
like circuit breakers, circuit boards,
relays, motors and sensors •Reduced
VOCs (Volatile Organic Compounds)
•Quick penetrating •Safe on plastics
•No residue •Does not contain any
chlorinated solvents •Inverta spray
valve lets you spray in an upright
or inverted position •11 oz. can
MCM Part #
20-5370
LVC
Contact Cleaner
Electro-Wash PX Fiber
Optic Precision Cleaner
MCM Part #
20-4594
•Handy combo kit combines
the popular DeoxIT® D5
and DeoxIT® Gold contact
cleaners, rejuvenators,
conductivity enhancers
and lubricants DeoxIT® D5
•Dissolves oxidation and
corrosion on metal surfaces
for better contact and surface protection •Improves
connector performance and reliability DeoxIT® Gold
•Used for plated metal surfaces to improve conductivity,
maintain optimal signal quality, reduce fretting seven
dendrite corrosion and stabilize connections between
metals •Reduces wear and abrasion, arcing, RFI
and intermittent connections •Both cleaners
are non-ozone depleting •Each can is 5 oz. •Limited
quanitities
Micro-X NU
Contact Cleaner
This extra-strength contact cleaner
quickly removes soils and oxides. Features:
•Nonflammable •Xtra cleaning strength
•Contains HCFC-225 •Dielectric
breakdown 30 kV •Dries fast •Leaves no
residue •Test on plastics •141b free Typical
applications include: •Cleans oils, grease
and corrosive contaminants from live switches
and relays •Removes conductive and insulative
soils from live wire assemblies and harnesses
•Cleans encrusted soils from live solenoid and
switches •12 oz. can •Mfr. #ES1612
(1-11)
$35.49
ONLY
$30.39
22.99
26.19
11
DeoxIT® D5 and DeoxIT®
Gold Combo Pack
MCM Part #
200-425
Power-Wash® NX
MCM Part #
20-4060
#108-4610
and Chemicals
ONLY
$19.99
VOC Free Contact Cleaner
•Ideal for cleaning electrical equipment
and fine precision parts like coin
counters, connectors, office equipment
and circuits •Penetrates to remove light
greases, oils, dirt and organic soils
•Alternative to HCFC 141b cleaners
•Does not contain VOCs per EPA
guidelines •Non-flammable and nonconductive •Fast evaporating and leaves
no residue •Safe on most surfaces,
but may be harmful to some
plastics •14 oz. can
MCM Part #
20-5435
www.MCMelectronics.com /1-800-543-4330
ONLY
$54.99
1179
11
Cleaning and Chemicals - Contact Cleaners
Cleaner Lubricants
Gold Guard™ Pen
Kontact Restorer
®
4Extra cleaning strength
4Lubricates
4Nonflammable
Kleen-It™ G3 Cleaner/Lubricant
•The one-step contact cleaner and
lubricant •May be used on energized
equipment •Extra cleaning strength
•Extends the life of contacts by protecting
them from carbon build-up, oxidation and
corrosion •Leaves protective hydrocarbon
lubricant •Prevents degradation of
electrical signal •Excellent dielectric
properties •Contains n-propyl bromide •141b free
Typical applications include: •Cleans and protects
metal contacts, potentiometers, relays, circuit breakers,
fuse blocks, and electronic controls •Ideal for
protecting tin-lead, copper and nickel contacts
•12 oz. can •Mfr. #ES1629
Cleaner/lubricant is formulated to quickly
penetrate and flush away grease, dirt, oil,
dust, and oxidized surface metals leaving
a thin protective coating of silicone to
lubricate and protect against corrosion.
Ideal for switches, data processing,
electronic business equipment, controls,
counters, and gauges. Not recommended
for use on polystyrene or polycarbonate
materials. Always test on plastics in
inconspicuous area before use. Features:
•Non-flammable •Cleans and lubricates
•Silicone lubricant •Stops corrosion
•12 oz. can •Mfr. #2421-12S
MCM Part #
20-4420
MCM Part #
20-4165
•The pen for cleaning and lubricating gold and other
noble metal contacts and connecters •Cleans and
leaves protective lubricant in one step •Extends
the life of noble metal contacts •Chisel type marker
for exact delivery of solvent to surface •Safe on
most plastics •8.5 grams (0.3 oz.) •Mfr. #CW7400
®
(1-11)
$24.99
(12-23)
$24.02
(24-up)
$23.07
(1-11)
$21.99
(12-23)
$21.55
MCM Part #
20-3220
(1-4)
$14.79
(5-up)
$14.13
Fader Cleaners
(24-up)
$19.83
Contact Protectors
DeoxIT Fader
Contact Lubricants
®
DeoxIT Gold
®
•Precision lubricant for conductive plastic faders, slide
potentiometers and other sliding surfaces •Replenishes
lubrication lost on surfaces that have been cleaned
with solvents •Improves tactile quality of audio,
video and data applications •Reduces intermittent
connections, arcing, RFI, wear and abrasion •Non
ozone depleting •Temperature range: -26°C~150°C
•Unique contact cleaner, conditioner, enhancer, lubricant
and protectant for plated metal surfaces •Improves
conductivity, maintains optimum signal quality, reduces
fretting and dendrite corrosion, and stabilizes connections
between similar and dissimilar metals •Reduces wear and
abrasion, arcing, RFI and intermittent connections and
improves connector performance/reliability •Ideal for goldplated surfaces •On visibly oxidized surfaces, pre-treat with
DeoxIT® contact cleaner •Temperature range: -50°~464°F
•Non-flammable sprays: #200-245 and 200-235
MCM Part #
200-025
200-235
200-245
200-190
200-035
200-322
200-030
200-061
200-071
Mfr. #
G5S-6
GN5S-6N
GN5MS-15
GP5S-6
G100P
K-G1W-25
G50W
G100L-2DB
G100L-25C
Size
5 oz.
5.75 oz.
0.5 oz.
5 oz.
0.2 oz.
25 wipes
50 wipes
0.25 oz.
0.845 oz.
Applicator
Aerosol spray
Aerosol spray, non-flammable
Aerosol spray, non-flammable
Pump spray
Pen
Presaturated wipes
Presaturated wipes
Vial with brush
Bottle with needle
B
DeoxIT Shield Protector
®
•Maintains “new” system performance in severe
environments! •Sealant and protectant; oxidation
deterrent, contact lubricant •For use on surfaces
pre-cleaned with DeoxIT® or newly manufactured
metal/electrical connections •Improves connector
performance •Excellent for outdoor/harsh
environments •On outdoor applications,
pre-clean with DeoxIT® prior to applying
•Temperature range: -34°~210°C
Fig.
A
B
C
D
E
MCM Part #
200-044
200-045
200-047
200-075
200-065
1180
Mfr. #
SN5MS-15
S5S-6
SN5S-6N
S100L-25C
S100L-2DB
Solution
5%
5%
5%
25%
100%
100%
100%
100%
100%
C
(1-3)
$22.49
25.99
10.99
29.99
21.99
16.99
26.99
26.99
44.99
(4-up)
$21.37
24.69
10.44
28.49
20.89
16.14
25.64
25.64
42.74
A
Contact Cleaning Kits
Fiber Optic
Cleaning Kit
D
Description
Spray, 5% solution, 14 g
Spray, 5% solution, 142 g
Spray, 5% solution, 163 g
Needle dispenser, 100% solution, 25mL, nonflammable
Vial with brush, 100% solution, 7.4mL MCM Part # Mfr. #
Description
ONLY
200-204
FN5MS-H15 Spray, 5% solution, 14 g $10.19
200-205
F5S-H6
Spray, 5% solution, 142 g 13.89
200-206
F100S-L2 Spray, 100% solution, 57 g 18.99
200-208
F100L-25C Needle dispenser, 100%
26.49
solution, 25mL
200-430
DFG-213-1 Grease, 100% solution, 28 g14.99
E
ONLY
$8.99
14.69
20.99
24.99
14.99
www.MCMelectronics.com /1-800-543-4330
Chemtronics®
has included all the cleaning
supplies necessary for
a successful fusion splice
and 2.5mm fiber optic
connection in this convenient kit. Swabs are packaged
in rugged tubes while the entire kit fits inside the
included bag. Includes: •200 QbE® cleaning system
•Electro-Wash® PX •50 2.5mm foam fiber optic swabs
•100 lint-free precision wipes •Electro-Wash® MX
premoistened wipes •Mfr. #CFK1010 1 I&M
MCM Part #
20-4592
ONLY
$103.00
Follow us on:
&
Contact Cleaners - Cleaning
and Chemicals
11
Survival Kits
Emergency
preparedness is a smart
idea in any occasion.
Caig has specially
designed these kits,
packed in a protective
kit box, to cover your needs in different environments.
Audio/Video Survival Kit: Includes a variety of
DeoxIT®, DeoxIT® GOLD, DeoxIT® FaderLube
products and applicators for your audio and video
signal connections and mixers Computer Survival Kit:
Includes DeoxIT® and DeoxIT® GOLD with precision
applicators to keep your computer connections
working properly Industrial Survival Kit: Includes
DeoxIT®, DeoxIT® GOLD, and DeoxIT SHIELD with
swabs, brushes, and wipes for audio, telecom, CCTV,
gaming, and other technicians. Emergency Survival
Kit: Includes a variety of DeoxIT® products and
applicators ready to keep all of your crucial
electronic and battery powered mobile
equipment working when you need them most.
MCM Part #
200-445
200-450
200-455
200-470
Mfr.#
SK-AV35
SK-CM30
SK-IN30
K-DEO-ESK
Description
ONLY
A/V Survival Kit
$29.99
Computer Survival Kit
31.49
Industrial Survival Kit
31.49
Emergency Survival Kit 22.49
DeoxIT Mini Sprays
®
•Chemically improves all
metal-to-metal connections
and contacts! •Perfect sizes
for your tool kit •Includes:
14g mini sprays of DeoxIT®
contact cleaner and DeoxIT®
Gold contact conditioner
and protector
MCM Part #
200-440
DeoxIT Service Kit
®
•Convenient kit is ideal to have on hand when
something electric doesn’t work •Provides cleaner
audio, cleaner video and more reliable data for
a wide range of electronics Includes: •DeoxIT®
DN5MS-15 spray •DeoxIT® D100L-2BD brush
applicator •DeoxIT® D100P pen •(50) DeoxIT®
Individual wipes •Lint free swabs, brushes and
cloths •Zip-lock storage pouch •Mfr. #K-DEO155
Electro-Wash PR
MCM Part #
200-505 ✔Safe on plastics
✔Warning: Flammable
ONLY
$49.99
DeoxIT Essentials Kit
®
DeoxIT
Gold Vacuum
Tube Cleaning Kit
®
•The only kit designed
for audiophiles clean
and improve vacuum
tubes found on tube
amplifiers •Unique
formulation chemically
dissolves surface
contaminants on
contacts, increases conductivity, and seals and protects
contact surface •Kit includes DeoxIT® 100% solution,
DeoxIT® Gold 100% solution, stainless steel mini
brush, lint-free swabs, brushes, and wipes
in a kit box. •Mfr.# SK-GXMD
MCM Part #
200-460
•An easy way to check
out Caig’s best selling
chemicals •Small sized kit
great for desk drawers and
tool bags •All tubes are
100% undiluted chemicals
Kit includes: •DeoxIT®
squeeze tube (Mfr.
#D100L-2C) •DeoxIT®
GOLD squeeze tube (Mfr.
#G100L-2C) •DeoxIT®
SHIELD squeeze tube (Mfr. #S100L-2C) •DeoxIT®
FaderLube Liquid squeeze tube (Mfr. #F100L-L2C)
MCM Part #
200-305
(4 kits-up)
$10.79
®
®
•Bring your old systems
back to life and save money
with this kit •Great for A/V,
power, and data connections
•Use DeoxIT® to clean
off years of corrosion
and oxidation, followed by
DeoxIT® Gold to enhance
and maintain superior
conductivity Kit includes:
•DeoxIT® 100% solution, 7.4ml vial with brush
applicator (#D100L-2DB) •DeoxIT® GOLD
100% solution, 7.4ml vial with brush applicator
(#G100L-2DB) •Lint-free swabs, brushes and cloths
•This kit is ideal for
cleaning connectors on
cell phones, PDA’s, MP3
players, batteries, chargers
and more •Improves
electrical connections
•Increase battery life
•Improves data transfer
•Reduces crashes and data
errors •Includes 2ml squeeze
tube and two applicator
swabs •Mfr. #CCS-801
ONLY
$3.79
MCM Part #
200-310
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
Degreasers
®
General purpose cleaner and degreaser
removes grease, dirt, oil, carbon and
oxidation. Fast drying formula leaves
no residue. Contains no ozone depleting
compounds. Cleans PC boards, plastic
and metal housings, magnetic pick-ups,
contacts and potentiometers. Not for
use on energized equipment. •10 oz.
can •Mfr. #ES1603
MCM Part #
20-2080
(1-3 kits)
$29.99
(4 kits-up)
$29.09
(1-11)
$13.99
(12-23)
$12.73
(24-up)
$12.35
Tun-O-Wash
Effectively cleans, degreases and removes
oxidation from electronic equipment, in one
step. No rinsing is required. Deep penetration,
instant evaporation and zero ozone depletion
potential, make this the ideal choice for
tuners, potentiometers, controls and PC
boards. HCFC/CFC free. Not for use
on energized equipment. •12.5 oz.
•Mfr. #ES2400
MCM Part #
20-1715
DeoxIT and DeoxIT
Gold Electronics
Maintenance Kit
®
MCM Part #
200-495 (1-3 kits)
$11.99
ONLY
$33.99
DeoxIT Cell Phone
Connector Cleaning Kit
ONLY
$17.99
(1-5)
$24.99
(6-11)
$23.61
(12-23)
$22.91
(24-up)
$21.75
Electro-Wash PX
®
Fast drying cleaner and degreaser safe
for most plastics. High pressure aerosol
cleans soils, oxidation and contaminants.
Low surface tension and high purity
allow precision cleaning, even under
components. No ozone depleting
compounds, HCFC/CFC free. Not for use
on energized equipment. Designed for use
on PC boards, contacts, controls, meters,
motors and other electronic assemblies.
12.5 oz. can •Mfr. #ES1210
MCM Part #
20-1670 (1-5)
$23.99
(6-11)
$22.99
www.MCMelectronics.com /1-800-543-4330
(12-23)
$21.80
(24-up)
$19.90
1181
11
Cleaning and Chemicals - Cleaning Chemicals
Electro-Wash PN
Electro-Wash MX
This nonflammable cleaner degreaser is:
•Safe on plastics •Nonflammable •Regular
cleaning strength •Dries fast •Leaves no
residue •141b free Typical applications
include: •Quickly removes oils, oxides,
and handling soils •Cleans carbon dust
from motors and transformers 12 oz. can.
•Mfr. #ES1678
4Safe on plastics
4Extra cleaning strength
4Warning: Flammable
®
®
MCM Part #
20-4036
(1-11)
$40.49
(12-23)
$39.68
•The extra-strength, plastic-safe universal
cleaner with a moderate evaporation time
•Moderate evaporation rate increases
cleaning power •Leaves no residue •Ozone
safe •Removes organic and ionic soils •Cleans
handling soils from circuitry before reassembly
•Cleans hard-line coax cable •Cleans metal
and fiber optic cable splices •Available in
10 oz. spray or 9g pen applicator
(24-up)
$38.49
Blue Shower G3™
®
MCM Part # Description Mfr. # (1-11) (12-23)(24-up)
20-4480
10 oz. aerosol ES1621 $20.99 $19.76$18.77
20-4478
9g pen
FW2150 9.99 9.74 9.43
Electro-Wash NR
®
4Best on grease and oil
4Nonflammable
MCM Part #
20-4040
MCM Part #
20-3935
Electro-Wash VZ
®
•Regular cleaning strength •Dries fast
•Leaves no residue •Test on plastics •Ozone
safe Typical applications include: •Cleans
oils and grease from equipment •Removes
oil and oxides from relay and circuit banks
•Cleans contamination from tools and
equipment •12 oz. can •Mfr. #ES1614
(1-11)
$17.99
(12-23)
$17.61
(24-up)
$17.56
Features: •Regular strength •Ozone safe
•Test on plastics •Removes organic and
ionic soils; one cleaner for all soil types
Applications include: •Cleaning PCBs,
electronics, and electrical equipment
•Maintaining PLCs, meters/measurement
devices •Removing oils from pneumatic and
hydraulic assemblies, motors and transformers, hand
tools •12 oz. can •Mfr. #ES6100
(1-11)
$23.49
(12-23)
$23.02
(24-up)
$22.33
Electro-Wash NX
®
The extra-strength, nonflammable
cleaner degreaser •Nonflammable •Extra
cleaning strength •Dries fast •Leaves
no residue •Contains HCFC-225 •141b
free Typical applications include: •Cleans
oils and grease from live circuit boxes
•Removes oil from live wire assemblies
•Cleans carbon and oxides from live
switches and relays •12 oz. can
•Mfr. #ES1611
(1-11)
$31.99
(12-23)
$31.26
(1-11)
$28.99
(12-23)
$26.38
(24-up)
$25.59
4Wide cleaning ability
4Nonflammable
MCM Part #
20-4180
MCM Part #
20-4425
Blue Shower G3™ is based on a
new, patented technology making
it the direct replacement for cleaners/
degreasers containing HCFC-141b.
This innovative blend was designed
for precision cleaning of polar and
non-polar soils. Blue Shower®G3™
is effective in cleaning electronic
and electrical equipment, machinery,
metal parts, and other general cleaning applications.
Features: •Non-ozone depleting •Non-flammable
•Safe on most plastics •Rapidly evaporating •Zero
residue •16 oz. can •Mfr. #1630-16S
®
Max Kleen™ Xtreme™
4Extra cleaning strength
4Nonflammable
(24-up)
$30.73
✔Safe on plastics
Most popular name in high-powered
cleaner/degreasers now available in a new
economical formula. Designed for cleaning
electronic and electrical equipment,
machinery, and metal parts. Features:
•Safe on plastics •Non-corrosive •Rapidly
evaporating •Zero residue •Non-ozone depleting
•10 oz. can •Mfr. #1620-10S
MCM Part #
20-2100
•Most aggressive heavy-duty degreaser
•Removal of oxidized oil and grease
from tools, clutches, bearings and
housings •Dielectric strength of 18KV
•Non-corrosive and nonconductive
•Extra-strength solvent evaporates
quickly without leaving residue •Ozone
safe •Test on plastics •Contains n-propyl
bromide •19 oz. aerosol •Mfr. #ES2284
MCM Part #
20-4604
E-Line™
Blue Shower Cleaner Degreaser
®
ONLY
$10.49
(1-5)
$15.29
(6-11)
$14.80
(12-23)
$14.19
(24-up)
$13.55
Blue Shower II Cleaner Degreaser
✔Safe on plastics
✔Nonflammable
Max Kleen™ Mighty Wash™
Max-Kleen™ Citrus Cleaner
•Citrus-based, extra-strength formula
•Engineered for fast removal of oxidized
grease, sludge, wax, tar and oil •Does not
contain chlorinated solvents •Flashpoint
greater than 100°F •Non-corrosive and
nonconductive •Safe on most metals and
plastics •Ozone safe •Contains terpenes
•Great for cleaning mechanical parts, test
probes, hand tools, and greased-up
surfaces •15 oz. can •Mfr. #ES2289
MCM Part #
20-4470
1182
(1-11)
$7.99
(12-23)
$7.75
Modeled after the popular Blue Shower
1657, Blue Shower II was developed
for general cleaning and degreasing.
Nonflammable and safe for plastics,
Blue Shower II cleans polar and nonpolar soils, oils, greases, silicone and
fluxes. Ideal for tape head cleaning and
general degreasing and offers low ozone
depletion potential.
4Extra cleaning strength
4Water based
4Nonflammable
•Removes grease, oil and lubricants from
parts and tools •Strongest water-based
formulation available •Heavy-duty
cleaning performance •Prevents flash
rusting and corrosion •Biodegradable
•Low foaming •Ozone safe, butyl-free
and low in VOCs •CARB and OTC
compliant •Mfr. #ES3294
(24-up)
$7.52
MCM Part #
20-4608
MCM Part #Mfr. #
Size (1-5) (6-11) (12-23)(24-up)
20-2315 1667-8S 8 oz. $24.99$22.49$22.27$21.82
20-3980 1667-18S18 oz. 52.99 51.25 49.25 48.11
ONLY
$12.99
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
Cleaning Chemicals - Cleaning
High-Flash Maintenance Cleaner
Val-U Degreaser Wash
E-Line High-Flash is a non-chlorinated,
light duty degreaser and electrical
cleaner. High dielectric strength provides
an additional level of safety. Ideal for
cleaning light oils and carbon residues
from control panels, switch plates,
enclosures, and work surfaces. •Ideal
for electrical and maintenance cleaning
•High flash point •Non-chlorinated
•Plastic safe •Low odor •Low toxicity
•Non-ozone depleting •11 oz aerosol
•Mfr. #1626-11S
MCM Part #
20-5450
•Light-duty cleaning for electric
equipment, machinery, and metal
parts •Safe on most plastics •Evaporates
quickly with no residue •Adjustable
flow valve •Ozone safe •Flammable
•10 oz. aerosol •Mfr. #DDW-V610
MCM Part #
200-355
(12-up)
$6.49
•Multi-purpose, super industrial strength
cleaner removes the toughest stains and soils
•Water-based and biodegradable so it’s
safe on all surfaces except magnesium
•Does not contain butyl, chlorinated or
petroleum solvents, bleach ammonia or
abrasives •Alkaline formula inhibits
flash rusting •Rinses clean •28 oz.
bottle with trigger sprayer
•Quickly removes grease and other soils,
and leaves a non-oily finish on equipment
and surfaces •Considered ready-to-use,
but can be diluted for light cleaning
•Contains no butyl cellosolve •Nonflammable •Non-corrosive •Safe on
most plastics and painted surfaces
•Biodegradable •Non-ozone
depleting •1 quart •Mfr. #1502-QT
MCM Part #
20-5310
Eco-Shower Degreaser
•Clean heavy oil and grease
•Concentrated and dilutable •Nonflammable •Non-corrosive, moderate
pH •Safe on most plastics and painted
surfaces •Biodegradable; citrus and
soy based •Low VOC, zero GWP
•Non-ozone depleting
•Mfr. #1500-QT
T-91™ Non-Solvent Degreaser
ONLY
$12.99
MCM Part #
20-5325
HDX Heavy-Duty Degreaser
ONLY
$29.99
MCM Part #
20-5345
®
ONLY
$8.99
ONLY
$12.99
•A heavy-duty degreaser that removes
oil, grease, wax, dirt, moisture, tar,
brake fluid and other tough
contaminants •Useful on air
compressors, AC compressors,
appliances, brakes, coils and more
•Non-flammable •Fast evaporating
•Non-conductive •Low odor •Quick
penetration •No residue •19 oz. can
PF Solvent Degreaser
MCM Part #
20-5445
•Water-based degreaser contains no
solvents making it an environmentally
safe cleaning product •Provides premium
performance cleaning and requires less
product making it extremely efficient
•Zero VOC's •Biodegradable •Nonflammable, non-toxic and low odor
•Moderate foam for effective
mechanical cleaning •28 oz.
bottle with trigger sprayer
Instant Super Degreaser
•Heavy-duty degreaser removes oils,
greases, dirt and tar •Safe on metals so
it's great for air compressors, bearings,
cables, chains , motors and much more
•Power blast spray •Non-flammable,
non-chlorinated and non-conductive
•Fast evaporating •No rinsing and
no residue •20 oz. can
ONLY
$8.99
E-Line Zero-VOC is ideal for heavy-duty
degreasing and for removing paint and
sticky adhesive residues. Because it is
VOC-free, there are no regulatory
concerns! •100% Acetone •Ideal for
removing inks and adhesives •VOC-free,
Low GWP •Low toxicity •Non-ozone
depleting •12 oz aerosol •Mfr.#1611-12S
ONLY
$8.99
MCM Part #
20-5305
ONLY
$8.49
Zero-VOC General
Purpose Cleaner
BFX All-Purpose Cleaner
Precision Clean
Cleaner/Degreaser
Pine-Shower Degreaser
and Surface Cleaner
MCM Part #
20-4630
(6-11)
$6.83
11
•All purpose, water based and butylfree, this industrial strength cleaner
cleans the toughest dirt and oils
•Great for aluminum, carpet, chrome,
computer casings, engines and more
•Biodegradable •Non-corrosive
•Rinses clean •Safe on most
surfaces except magnesium
•28 oz. bottle with trigger sprayer
MCM Part #
20-5335
ONLY
$8.99
MCM Part #
20-5025
(1-5)
$6.99
and Chemicals
EFX
Solvent and Degreaser
®
•A full strength, penetrating degreaser
that removes dirt and oil •Designed for
power applications such as repair work,
transformers, turbines, windings on
generators and more •Compatible with
power cables and components •Flash
point above 140°F •Non-conductive and
no residue •Does not contain chlorinated
solvents •Can be used in parts washers,
dip tanks, and ultrasonic cleaners •Safe
to use on most surfaces •No hazardous
air pollutants •14 oz. can
MCM Part #
20-5330
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$9.99
•A fast acting, heavy duty solvent
that degreases and cleans in a single
operation saving you time and money
•Quickly removes grease and oils
•Provides a powerful blast which
instantly removes contaminants
•Ideal for cleaning metals and most
plastics •Fast evaporating •Safe to
use on most surfaces •No residue
•Non-chlorinated •15 oz. can
ONLY
$17.99
MCM Part #
20-5350
www.MCMelectronics.com /1-800-543-4330
ONLY
$10.99
1183
11
Cleaning and Chemicals - Cleaning Chemicals
IPA Isopropyl Alcohol
OCX Citrus Degreaser
Safe and effective cleaner for removing dust,
oils and metal oxides from magnetic heads
•OCX is a high performance industrial
degreaser that cleans on contact •Works
fast to remove grease, oil and sludge
from alternators, bearings, compressors,
chains and more •Natural solvent base
•Does not contain chlorinated solvents
•Flash point above 100°F •Nonconductive •Safe on all metals and
most plastics •Inverta spray valve
lets you spray upright or inverted
•Size: 15 oz. can
MCM Part #
20-5355
Chempad™
and drives. Reduces head wear and improves
Presaturated Wipes performance. Evaporates quickly and
•Ideal cleaning wipe
for computers, office
equipment, and
electronic appliances •Cleans dirt, oxides, and oil from
magnetic tape heads •Solvent evaporates completely,
leaving no residue •Nonabrasive •Safe on plastics
•Package contains 50, 4" x 3" wipers •Mfr. #CP400
MCM Part #
20-3255
ONLY
$11.99
(1-11) $30.99 Screen Prep™
Presaturated
Wipes
®
•Removes cable gels, blocking
compounds, flooding and filling
compounds, grease, tar and oil
•Also be used to remove petroleum,
polyethylene and silicone based gels
•Preferred by telecom workers
•Flash point above 140°F •Safe on
cable insulation and components,
metals and most plastics •Nonozone depleting •Rinses off with
water •No chlorinated solvents
•32 oz. bottle
•A convenient
cleaning and static control system for monitor screens
•Cleans and provides a static dissipative treatment
•Safely removes dust, dirt, and oils •Controls staticgenerated contamination •Wet pad cleans and applies
static protection; dry wiper wipes screen optically clear
•Safe on plastics •Package contains 25 twin packs
(each twin pack includes 3" x 4" pad
and 4" x 6" wiper) •Mfr. #CSP20
MCM Part #
20-3435
(1-5)
$12.99
(6-11)
$12.60
(12-23)
$12.47
(1-11)
$31.99
(12-23)
$29.11
•Makes a great all purpose cleaner
for electronic devices and components
•Prevents moisture contamination
and leaves no residue behind •Removes
oils, particles and other contaminates
•Safe for the ozone and on most
plastics •32 oz. bottle
MCM Part #
20-5105
ONLY
$8.99
(24-up)
$26.78
IPA Presaturated Wipes
Optic Prep
Presaturated wipes are
made from the highest
quality premoistened
lens-grade tissue and
are designed for cleaning optical surfaces. Safely cleans
and polishes optical surfaces, lenses, photographic
equipment, CRT screens and instruments. Mild
non-abrasive solvent quickly removes dust, oils and
contaminants. Evaporates quickly, leaves no residue
and is compatible with most plastics, glass and metals.
Package contains 50, 4" x 8.25" pads. •Mfr. #CP410
(1-5) $22.99 (6-11)
$22.89 (12-23) $22.54 The general purpose presaturated wipe
in a convenient tub dispenser. Features:
•Ultra pure mixture of 70% Isopropyl
alcohol and 30% deionized water
•High absorbency and liquid retention
•Strong, will not tear, shred, unravel,
or lint •Holds up to most rigorous
scrubbing •Tubs of 100 wipes •Size: 6"
x 8.5" •Mfr. #SIP100P
MCM Part #
20-4200
(1-11)
$29.99
(12-23)
$29.24
•Safe on plastics •Warning flammable
•99%pure isopropyl alcohol improves
performance and extends the life of
equipment and tapes •Can also be used
for removing residue from magnetic
heads and removing interfering soils
from optical heads •Ozone safe •Dries
fast •Leaves no residue •32 oz. bottle
•Mfr. #ES3205
MCM Part #
20-4740
MCM Part #
20-4910 (24-up)
$14.15
#20-4482
Isopropyl Alcohol
(24-up)
$28.72
IPA Isopropyl Alcohol
•Features ultra pure mixture
of 70% IPA and 30%
deionized water •Removes
contamination and kills viruses on most surfaces
•High absorbency and liquid retention •Strong,
will not tear, shred, unravel or lint •Holds up
to the most rigorous scrubbing •100 C-fold
wipes in resealable container
(12-23)
$14.62
#20-2135 #20-2136
(24-up)
$22.27
Isopropyl Alcohol Wipes
(1-11)
$14.99
(24-up)
$12.22
#20-2251
™
1184
MCM Part #
20-1355
ONLY
$22.99
Alcohol
MCM Part #
20-2640
(24-up)
$29.84
Isopropyl
Alcohol
D’Gel Cable
Gel Solvent
MCM Part #
20-5400
(12-23) $30.96 leaves no residue. Safe for most plastics and
elastomers. CFC and HCFC free, no ozone
depleting compounds. Specially formulated
to safely clean optical and magnetic tape/disk
heads, memory systems and tape transport
mechanisms. 8 oz. liquid. •Mfr. #ES820L
#20-4575
99% pure, anhydrous isopropyl
alcohol for general purpose cleaning. Excellent
for tape head cleaning, removal of fluxes, light
oils, polar soils, and white mineral residue.
Can be used as a thinner for most fluxes.
Rapid evaporation, non-aggressive.
MCM Part # Mfr. #
Description (1-5) (6-11) (12-up)
20-2135 1610-P
16 oz. bottle $9.99 $9.69 $9.59
20-2136 1610-PT 16 oz. bottle 16.99 16.33 15.85
with spray trigger
20-4482 1610-100DSP 100 wipes in a 29.99 29.20 28.52
pop-up container
20-2251 1610-50pk 50 individually 22.99 22.29 21.79
packaged wipes
20-4575 1608-100BX 100 wipes in 23.99 -
reclosable tub
Isopropyl Alcohol
•Extremely pure alcohol
•Frequently recommended cleaner of tape
heads, disc drives, etc. •Does an excellent
job of dissolving and removing oxides from
recording heads, also an excellent degreaser
•Leaves no residue •Suggested for use with
swabs, clean cloth, or by immersion
•16 oz. can
ONLY
$11.99
www.MCMelectronics.com /1-800-543-4330
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-1095
$9.99 $9.88 $9.67 $9.50
Follow us on:
&
Cleaning Chemicals - Cleaning
and Chemicals
Label and Adhesive Remover
11
Glass Cleaner
Zero Charge Screen
and Keyboard Cleaner
With regular use, this cleaner
will eliminate static charge from
sensitive surfaces and provide
long-term static protection.
Removes hand oils, ink marks,
dust, fingerprints, nicotine, syrup,
carbon, and other soils from work areas. Safe on most
plastics. Applications include CRTs, keyboards, office
equipment, enclosures, glass, monitors, photocopying
and fax machines, POS terminals and bar code
readers. Non-abrasive formulation is safe on
sensitive surfaces. Includes 50 individually
packaged pre-saturated wipes. •Mfr. #1743-50PK
MCM Part #
20-2140
(1-5)
$24.99 (6-11)
$24.25 (12-23)
$23.29 6 oz. Label and Adhesive Remover
Specially designed hydrocarbon cleaner
that safely removes labels and adhesive
gums from equipment and products.
Effectively removes gummy residues,
labels, stickers, ink marks, beverage
spills, and other contaminants. Solvent
has a pleasant odor. •Mfr. #1613-6S
MCM Part #
20-2255
(1-5)
$13.99
(6-11)
$12.98
Static Free™ SD-7 Plast-N-Glas®
(12-up)
$12.17
(24-up)
$22.37
MCM Part #
20-1820
Goo Gone
Isopropyl Alcohol (IPA) in new,
convenient aerosol packaging. 99.8%
pure anhydrous (minimal water) IPA
is excellent for defluxing, stencil cleaning,
tool cleaning, tape-head cleaning and
other light cleaning. •Plastic safe
•Low toxicity •Non-ozone depleting
•Compliant with SCAQMD rule 1171
•12 oz aerosol •Mfr. # 1610-12S
Acetone
•Aggressive general purpose remover of
sticky adhesives and coating •Also useful
as a conformal coating remover of acrylic
coatings •Zero VOC •Low toxicity •Nonozone depleting •Size: 16 oz. •Mfr. #1611-P
MCM Part #
20-5280
MCM Part #
20-4675
20-3755
20-3905
ONLY
$9.49
Acetone
ONLY
$6.89
(1-5)
$12.49
(6-11)
$11.64
(12-23)
$11.12
(24-up)
$10.81
Removes chewing gum, grease, tar, labels,
tape residue, oil, blood, lipstick, mascara,
shoe polish, crayon and bumper stickers
from carpets, upholstery, clothing,
vinyl, leather, and fiberglass.
IPA Electronics Cleaner
MCM Part #
20-5440
Instantly dissipates electrostatic buildup while safely cleaning and polishing
surfaces. Compatible with all plastics,
glass and stainless steel. Will not smear,
streak, stain or scratch. Foaming spray
will not run or drip. Effective on oils,
finger soils, and nicotine stains. 14 oz.
can. •Mfr. #ES1668
Description
4 oz. bottle
8 oz. bottle
12 oz. spray gel
ONLY
4.49
6.19
8.49
Mighty Pen™
Universal Cleaning Pen
The Mighty Pen™ is ideal for precise removal of
label adhesives, marker and ink stains, and conformal
coating from printed circuit boards. The unique
marker tip dispenser provides controlled and exact
application. This universal cleaning pen allows for
quick, convenient, and precise spot removal of
stubborn soils. Fast drying and safe on most
plastics. 0.32 oz. pen. •Mfr. #CW3700
MCM Part #
20-3875
(1-11)
$10.29
4Nonflammable
4Biodegradable
•Specifically formulated to clean glass
as well as other surfaces like stainless
steel, chrome, mirrors, plastic, ceramic
and enamel •Removes dirt, oils, and
finger prints while leaving surfaces
streak free •Contains no phosphates,
EDTA, or NTA •Non-caustic, nonacidic, no chlorine bleach or abrasives
•Butyl free •32 oz. bottle with
trigger sprayer •Mfr. #ES3266
MCM Part #
20-4945 ONLY
$5.89
(12-up)
$9.80
Glass Cleaner
Gum Remover
•Removes gum completely and other
stains like adhesive residue and candle wax
•Designed for use on carpet, but will work
on most surfaces •No sticky residue
•No rinsing required •8 oz. bottle.
MCM Part #
108-4130
Eco-Rite™ Glass Cleaner
ONLY
$11.99
•Ideal for cleaning plastic and glass •Strong
foaming action •Removes film and nicotine
•Ozone safe •Non-streaking •18 oz. can
•Mfr. #1625-18S
MCM Part #
20-3300
(1-11)
$3.99
(12-23)
$3.91
(24-up)
$3.79
Zero-VOC General Purpose Cleaner
E-Line Zero-VOC is ideal for heavy-duty
degreasing and for removing paint and
sticky adhesive residues. Because it is
VOC-free, there are no regulatory
concerns! •100% Acetone •Ideal for
removing inks and adhesives •VOC-free,
Low GWP •Low toxicity •Non-ozone
depleting •12 oz aerosol •Mfr.#1611-12S
MCM Part #
20-5445
ONLY
$8.99
Sharpshooter™
Extra Strength Mark Remover
•This no-rinse cleaner removes tough stains
such as grease, lipstick, crayon, black heel
marks, pencil marks and smoke film from
almost any washable hard surface •Quart
container with trigger sprayer
MCM Part #
108-4165
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$10.99
Glass and Plastic Cleaner
•Removes dirt and grease safely without
leaving streaks or residue •Contains greasecutting ammonia •14 oz.
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-465
$5.49 $5.29 $4.99 $4.89
www.MCMelectronics.com /1-800-543-4330
1185
11
Cleaning and Chemicals - Cleaning Chemicals
NEW!
VidiMax Multi
Type Screen Cleaner
Eco-Shine
Glass Cleaner
•Made from 100% naturally-derived
and sustainable ingredients •Streakfree cleaning •Removes fingerprints
and light oils from glass, stainless
steel, chrome, mirrors, tile, plastic,
ceramic and enamel •Non-flammable
•Non-ammoniated, safe on sensitive
surfaces •Biodegradable •Low VOC,
zero GWP •Non-ozone depleting
MCM Part # Mfr. #
Description
ONLY
20-4640
1505-QT One quart with trigger sprayer $5.99
#20-4585
•Universal screen cleaner
removes fingerprints from
television and computer
screens without chemicals or
liquids •Super-soft brush and optical quality
chamois pad work with a unique cleaning compound
to quickly and easily make your screen look like
new •Works on CRTs, LCDs, plasma screens
and more •Convenient and portable •Mfr. #VM-1
MCM Part #
21-13486 ONLY
$12.99
Closed
NEW!
Open
Sidekick™
Tablet Screen Cleaner
•The Sidekick™ provides an easy, no
mess solution for cleaning fingerprints from tablets
and other touch screen surfaces •Carbon cleaning
compound cleans easily without liquids or chemicals
•Safe for all tablet computer surfaces •Protective
cap for when not in use •Long lasting, 150
cleanings per pad •Replaceable pads available
MCM Part # Mfr. #
21-13460
SDK-1
21-13462
SDK-2
21-13464
SDK-CP
•The Smartklear™ provides an
easy, no mess solution for
cleaning fingerprints from
smart phone touch screens •Carbon
cleaning compound cleans easily
without liquids or chemicals
•Safe for all screen surfaces
•Protective cap for when not
in use •Long lasting, 300
cleanings per pad •Replaceable pads available
MCM Part # Mfr. #
21-13488
SMK-1
21-13490
SMK-CP
Description
Sidekick™ screen cleaner
Sidekick™ screen cleaner
with extra pad
Sidekick™ cleaning pad
refill – 2/pk
ONLY
$7.19
9.99
6.79
(1-5)
$9.49
(6-11)
$8.64
(12-up)
$7.95
Screen cleaning kits for use on
LCD, plasma, CRT, touch and
other sensitive screens. •Alcohol
free formula provides
driplessapplication with a
streakless shine •2 oz. bottle
of dripless solution and a
high performance micro-fiber
cloth •Mfr. #CCS-502
•Handy all-in-one device provides everything needed
to clean your computer screen and keyboard •One
end has a optical grade chamois with a non-liquid
compound to remove fingerprints from the screen
•Other end has a brush used to remove dust and dirt
from screen and another for cleaning between keys on
keyboard •Compact and portable to take anywhere
•Protective cap for when not in use •Mfr. #LTP-1
ONLY
$12.79
MCM Part #
200-345
#20-4587
•Perfect for safely cleaning all LCD
displays and electronics •Removes all
dust, fingerprints, smudges, and grime
•Streak-free professional liquid-polymer
formula comes as a 6 oz. gel
solution that won’t run when
sprayed on the surface
•Kit includes: Pro Clear™,
Premium 12" x 12"
microfiber cloth,
and a reusable plastic
bag for storage
MCM Part #
20-4800
Screen
Cleaner Spray Kit with Cloth
NEW!
1186
ONLY
$4.49
3.89
•Professional quality screen
cleaner is safe on LCD,
plasma, touch, and CRT
screens for a perfect
finish •Easily removes
fingerprints and grime
•Highest quality, dripless
formula is alcohol,
ammonia, and streak free
•12" x 12" specialized microfiber cloth
allows you to clean with little effort •Economic
22 oz. spray bottle is perfect for technician centers,
installations, hotels, and otherwise frequent use
LapTop-Pro™
3-in-1 Laptop Cleaner
MCM Part #
Pro Clear™ LCD Screen Cleaning Kit
Industrial Size
Screen Cleaner
MCM Part #
200-410
MCM Part #
21-13466
Description
Smartklear™ screen cleaner
Smartklear™ cleaning
pad refill – 2/pk
•Designed to clean sensitive surfaces
including non-glare coatings •Gel
formula will not run down into
sensitive equipment •Alcohol
and ammonia free •Microfiber
cloths quickly clean smooth
surfaces without scratching,
and can be used with or
without cleaner
Description
(1-11) (12-23) (24-up)
20-4585
Screen spray, 6 oz.
$4.69 $4.27 $4.14
20-4587 Microfiber cloths, two pack 6.49 5.91 5.73
Smartklear™
NEW!
Smart Phone Screen Cleaner
LCD Cleaner
LCD Screen Cleaner
and Microfiber Cloths
ONLY
$8.99
www.MCMelectronics.com /1-800-543-4330
ONLY
$7.99
Screen Cleaner with
Antimicrobial Microfiber
• Safe and effective cleaner for
all electronic displays and touch
screen devices •Will not drip or
leave streaks and is strong
enough to remove tough dirt,
dust and fingerprints •Antistatic cleaner •Biodegradable
•Alcohol and ammonia free
•Treated antimicrobial
microfiber creates an
invisible, long lasting
barrier which protects
against harmful
micro-organisms
MCM Part #
20-5060
20-5065
20-5070
20-5075
Description
20mL with 6" microfiber
2 oz. with 6" microfiber
6 oz. with 12" microfiber
22 oz. with 12" microfiber
Follow us on:
ONLY
$4.49
5.99
6.99
9.99
&
Cleaning Chemicals - Cleaning
11
and Chemicals
#20-5100
Cleaning Wipes
Antimicrobial
Touchscreen Wipes
B
A
•Safely remove fingerprints, smudges and debris
from touchscreen devices without scratching
or linting •These wipes create a invisible, long
lasting barrier which protects against microorganisms •Environmentally friendly, non-toxic and
non-sensitizing to skin •Includes 14 antimicrobial wet
wipes and one 6" antimicrobial treated microfiber
cloth
MCM Part #
20-5055
ONLY
$9.99
PlasmaCare Cleaning Kits
Economy kit includes: •Non-alcohol based plasma gel
cleaning solution, hand held cleaner with advanced,
washable micro-fiber cleaning cloth and additional
multi-use cleaning cloth Ultimate Platinum 1080 kit
includes: •Mahogany wooden storage box, non-alcohol
based plasma gel cleaning solution, hand held cleaner
with advanced, washable micro-fiber cleaning cloth
and additional multi-use cleaning cloth
Fig.
A
B
MCM Part #
80-6785
80-6790
Description
Economy kit
Ultimate 1080 kit
ONLY
$16.98
34.49
Office and Electronics Cleaners
#20-5095
•Ideal portable cleaning
wipes for all electronic
devices •Used for cleaning
laptops, computers,
keyboards, printers,
furniture, phones and
much more •Removes
germs and bacteria while
moisturizing dry skin
MCM Part #
20-5095
20-5100
Description
50 count
100 count
ONLY
$3.99
4.99
Anti-Static Foam Cleaner
for Glass and Plastic
A specially designed formula for general
external cleaning of glass and plastic
materials. Features: •Leaves no film
while keeping equipment clean and static
free •15 oz. aerosol can •Mfr. #8072
MCM Part #
20-2935
(1-5) $6.99 (6-11) $6.92 (12-23) $6.82 (24-up)
$6.70
LCD Screen Cleaning Kits
•This cleaning formula was specially designed for
LCD screens •Ideal for use on TFT monitors, TV’s,
laptops, PDAs, MP3 players and digital cameras
Includes: •Professional cleaning fluid •Microfiber
cleaning cloth •Antistatic dust brush
MCM Part #
21-11080
21-11082
Description
Standard screen cleaning kit
Large screen cleaning kit
50 Pack Office Wipes
ONLY
$4.99
6.69
20-5010
Included
Electronics Cleaning Kit
•This handy cleaning kit safely and effectively cleans
all electronic devices, displays and accessories •Ideal
for laptops, computers, keyboards, printers, TV’s,
touch screens and more •Conveniently packaged in
a re-sealable storage pouch Includes: •4 oz. duster
•2 oz. screen cleaner •6" x 6" antimicrobial treated
microfiber •Cleaning brush •Two alcohol swabs
MCM Part #
20-5080
2 oz. Screen Cleaner
with Microfiber Cloth
•Formulated to remove dust, fingerprints
and other contaminates from a variety of
screens •Works on computer monitors,
television screens, touchscreens and other
displays •Ideal cleaning solution for
computer-based recording studios, in the
office or at home •Safe, alcohol free solution •No
dripping or streaking •Includes microfiber cloth
MCM Part # Mfr. #
Description
ONLY
20-5015
GSC-102 Screen cleaner
$7.49
20-5010
GLM-112 12" x 12" microfiber cloth 5.59
ONLY
$13.99
•51⁄8" x 8" isopropyl alcohol
wipe •Clean cell phones, tablets
computers and office equipment
•Use in the classroom as
a whiteboard wipe
•Limited quantities
MCM Part #
58-15565
ONLY
$7.27
Hand Cleaners and Lotion
Laptop/Tablet
Cleaning Kit
•Kit includes the essentials to
keep your laptop or tablet free
from fingerprints, dust, grime,
and connectivity issues •Kit
includes DeoxIT Contact Cleaner
and Rejuvenator, aerosol duster,
LCD cleaning spray, microfiber
cleaning cloth, brushes, and
swabs packed in a resealable
plastic box •Mfr.# SK-LT19
•Helps dissipate static charge from
operator’s hands •Formulated with
D-Stat, Z-D and aloe vera •Does not
contain lanolin, oils, greases or silicon
•Fast absorption, penetrates deeply
•.4 sec. electrostatic decay time
•Available in 8 oz. pump bottle
MCM Part #
200-465
MCM Part #
20-990
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$16.99
Zero Charge AntiStatic Hand Lotion
(1-5)
$6.99
(6-11)
$6.69
www.MCMelectronics.com /1-800-543-4330
(12-23)
$6.44
1187
11
Cleaning and Chemicals - Cleaning Chemicals
20-5010
SCRUBS In-A-Bucket
Hand Cleaner Towels
®
Hi Tech Hand Lotion
Keeps the skin moistened without the
risk of contamination. This non-acidic
formulation does not contain glycerin,
silicone, lanolin or mineral oil so it will not
interfere with wrist strap performance. It
absorbs quickly and provides good contact
between the skin and wrist strap. Features:
•No contamination •Complies with DOD
1686A and DOD 263 •7 oz. bottle •Mfr. #7001
MCM Part #
20-4330
(1-5)
$6.49
(6-11)
$5.59
(12-up)
$5.15
Reztore™ Hand Lotion
MCM Part #
20-3898
20-3899
20-3900
20-3901
4 oz.
Guitar Polish
Description
(1-5 pkgs.) (6 pkgs.-up)
10 towels in a foil pack $3.49
$3.39
30 towels in a bucket 8.99
8.72
72 towels in a bucket 16.99
15.62
Wall mount for 17.67
15.80
30 or 72 count buckets
ONLY
$8.29
8.49
•Provides deep cleaning, nonscratching abrasives to quickly
remove dirt and grime •Eliminates
the need for soap, water and a
sink making them useful in the
shop or on the go •Uniformly
premoistened towel •Superior
terpene blend •Fast acting
•Disposable •Easy to carry and store
•Towel dimensions: 10.5" x 12.5" •Bucket of 72 towels
MCM Part #
20-5410
ONLY
$15.99
#20-5244
#20-5240
•A unique hand lotion that
creates an invisible glove
•Protects and shields your hands
from dirt, grease, chemicals,
and harsh contaminants
•Anti-bacterial •Anti-static
•Moisturizes skin •Non-greasy
•Does not impair grip
Heavy-Duty
Hand Cleaners
#20-5242
#20-5246
•Lava® soaps use a byproduct of volcanic activity
called pumice in combination with various cleaning
and moisturizing agents to clean and soften hands
•Cleans dirt, grease, grime, ink, glue and much more
ONLY
$6.89
5.99
19.99
29.99
MCM Part #
Description
20-5240
Professional strength 4 oz. bar
20-5242
Classic lava 5.75 oz. bar
20-5244
Twin pack classic lava 5.75 oz. bars
20-5246
Liquid soap - 7.5 oz. pump bottle
ONLY
$1.49
1.99
2.99
3.99
Musician Chemicals
Antibacterial Hand Spray
4 oz. Case Freshener
•Helps protect from infections
and disease by reducing bacteria
on the skin •TSA travel approved
size lets you take it anywhere for
hours of protection •Size and
shape of bottle make it perfect
for pockets or purses •Size: 20mL
MCM Part #
20-5090
1188
MCM Part # Mfr. #
20-4995
GLP-104
20-5010
GLM-112
Description
ONLY
Guitar polish
$7.49
12" x 12" microfiber cloth 5.59
•Case freshener is formulated to
eliminate odors from guitar cases but is
ideal for all fabric surfaces •All-natural
freshener kills 99.9% of the germs that
cause fabric odors •Anti-microbial
•Mfr. #GLF-104
ONLY
$2.49
MCM Part #
20-4990
4 oz. Fingerboard
Conditioner
•Easy to use conditioner restores porouswood fingerboards and protects against
drying, warping and cracking •Orange
oil lifts finger grime from frets and
fingerboards •Ideal for rosewood,
ebony and pao ferro •Mfr. #GLC-104
MCM Part #
20-5000
ONLY
$7.49
4 oz. Microphone
Sanitizer
Hand-E-Glove™
MCM Part #
Description
200-415
2 oz bottle (50 applications)
200-475
Single-use packets (12)
200-480
Single-use packets (50)
200-485
16 oz pump bottle (400 applications)
•Water-based polish keeps new guitars
looking new and vintage guitars looking
their best •Easy to use guitar polish is
formulated to remove dust, fingerprints
and other contaminants from the finish
of guitars •Ideal for all acoustic
and electric guitars •Safe for
nitrocellulose lacquers
Workplace Hand
Cleaner Towels
•Silicone free hand lotion has a special
ESD formulation to help provide
reliable path-to-ground, protecting
ESD sensitive product •Lowers skin
electrical resistance with dissipative
formulation •Reduces contamination
that can cause solderability problems
•Absorbs quickly •Contains vitamins
A, D, and E •Enriched with aloe vera
for positive skin benefits •8 oz. bottle
MCM Part # Mfr. #
Description
21-11465
35665 Mild peach scent hand lotion
21-11470
35666
Unscented hand lotion
The unbeatable cleaning power of
SRUBS® Hand Cleaner Towels
remians an industry leader. The
patented citrus-based formula
works with the tough blue towel to
quickly loosen, dissolve, and
absorb dirt, epoxies, tar, inks, paint
and grease from your skin. This
fantastic 101⁄2" x 121⁄4" wipe is waterless
and will not transfer soils back to your hands.
ONLY
$6.99
www.MCMelectronics.com /1-800-543-4330
•This sanitizer is designed to clean and
disinfect microphones making it ideal
for live sound settings or karaoke where
microphones are used by multiple people
•Easy to use spray kills 99.99% of germs
that cause odor on microphones and
gear, even works on hands and skin
•Anti-bacterial •Mfr. #GLS-104
MCM Part #
20-5005
ONLY
$6.99
30-Count Axe Wipes
®
•Prolongs life of metal
strings •Improves sound
quality •Dissolves oxidation
and corrosion •Protects
against acid from hands
•Lubricates for fast smooth
movement •Safe to use, no
waxy buildup •Contains no
Teflon, silicone, solvents or dyes •For use on guitars,
banjo, violin, autoharp, hammer dulcimer, mandolin,
pedal steel, zither, etc. •100% liquid solution
MCM Part #
AX30W
ONLY
$12.99
Follow us on:
&
Cleaning Chemicals - Cleaning
Appliance Cleaners
Automatic Toilet
Bowl Cleaners
(12-up)
$13.18
MCM Part #
20-5525
20-5530
20-5535
Professional Mildew
Stain Remover
®
•Instantly eliminates the toughest
carpet stains and odors •No vacuuming,
rubbing, or scrubbing needed •Pet stains,
coffee, spaghetti sauce, grease and oil,
marker, wine and more; even old stains
•A must have when performing in-home
installations and services •18 oz. aerosol
17 oz. Stainless Steel Magic
MCM Part #
20-4580
Stainless steel magic products
make cleaning quick and easy.
The streak-free formula leaves
a showroom shine, plus a protective barrier
to help resist finger prints and water spots.
Stainless steel wipes feature a “no buff ” one
step application. Works great on aluminum
and chrome surfaces too. •Mfr. #50333020
MCM Part #
20-4700
MCM Part #
20-5320
ONLY
$11.09
Cooktop Magic cleaners
are specially formulated
for effective cleaning of glass,
ceramic, and porcelain cooktops.
Cooktop cleaner cuts through
tough grease and removes burnt on
deposits without scratching, leaving
A
B
a streak-free shine. Cooktop wipes
(#20-4730) feature non-scratching scrubbing fibers.
ONLY
$6.49
6.49
MCM Part #
20-5255
Automotive Cleaners
ONLY
$2.49
(12-up)
$6.70
One Step Cleaner Wax
Removes most fine scratches, light
oxidation, swirl marks, water spots, and
minor stains •Leaves a deep, rich waxed
finish •Clear coat safe •VOC content
less than 15 percent •16 oz. bottle
•Mfr. #051131-39006
MCM Part #
108-4275
ONLY
$11.99
Chrome and
Metal Polish
•Removes surface dust, oxidation,
corrosion and tarnish from chrome,
stainless steel and other automotive
metals such as brass, bronze or copper •10 oz. bottle
•Mfr. # 051131-39527
MCM Part #
108-4280
ONLY
$11.99
Trifree Break Cleaner
Removes residue and deposits created
by hard water. Great for coffeemakers,
humidifiers, vaporizers, dehumidifiers,
irons, and shower heads. •8 oz. bottle
•Mfr. #CF08
MCM Part #
20-4735
MCM Part #
20-5315
ONLY
$3.49
MCM Part #
20-4895
ONLY
$6.79
•Instantly removes brake fluid, grease,
brake dust and oil which improves brake
performance •Powerful jet spray with
high solvency can be applied without
disassembling brake unit •Instant
degreasing action help stops brake
squeal •Contains no ozone depleting
chemicals or chlorinated solvents
•Fast evaporating •No rinsing and
no residue •15 oz. can
Clear Flow
•Used to attach rear view mirror bracket or cellular
antenna to windshield •Also bonds metal to metal,
glass to metal, and glass to glass •Use included
accelerator followed by adhesive for a fast,
strong bond •Single use pack •Mfr. #340
•Foam carpet cleaner eliminates odors
without leaving residues behind •Strong
formula is useful in the home, office or any
other environment in need of freshening
•No vacuum required •Fresh scent
•20 oz. aerosol can
Cooktop Magic
Description
16 oz. bottle
30 wipes
(1-11)
$6.99
Rear View Mirror Adhesive
Professional Strength
Carpet Refresher
ONLY
$7.49
Mfr. #
50334025
50334010
ONLY
$3.99
3.99
3.99
Spot Shot Professional
Instant Carpet Stain Remover
ONLY
$4.99
Fig. MCM Part #
A 20-4725
B 20-4730
Description
Blue Plus Detergents
Bleach
Blue plus bleach
•A low VOC brake cleaner that instantly
removes brake fluid, grease, brake dust
and oil to improves brake performance
•Powerful jet spray with high solvency
can be applied without disassembling
brake unit •Helps stops brake squeal
•Contains no ozone depleting chemicals,
toluene or chlorinated solvents
•Fast evaporating •No rinsing
and no residue •14 oz. can
Carpet Cleaners
•Removes mildew stains fast and
without scrubbing •Use on any hard
surface where mildew stains can
form like in the bathroom, kitchen,
on campers, boats and more •Ideal
for use on sealed grout, tile, vinyl,
paint prep work and plastic surfaces
•32 oz. bottle with spray trigger
MCM Part #
20-5250
U-10 Brake Cleaner
•Delivers continuous cleaning
action to keep toilet bowls clean,
stain-free and deodorized •#205525 Blue Plus Detergents keeps
water sparking blue and lasts for
up to five months •#20-5530 uses
chlorine to bleach away stains and
kills 99.9% of bacteria for up to
four months •#20-5535 combines
the blue detergent and bleach to kill 99.9% of bacteria
and keep water sparkling blue for up to four months
•Leaves a light protective film that restores
sheen to factory finish, reduces fingerprints
and resists streaking •Helps hide blemishes
and slows re-soiling •No greasy film
residue•Pleasant citrus fragrance •For
best results use with the Scotch-Brite™
High Performance Cleaning Cloth
(#108-3990) •21 oz. aerosol
(1-11)
$13.59
11
NEW!
Stainless
Steel Cleaner
MCM Part #
108-4125
and Chemicals
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$15.99
Auto Glass Cleaner
•Cleans all glass surfaces •Quick acting and
non-streaking •Removes fingerprints, oil and
grease •Can also be used to clean automotive
vinyl, interior plastic, clear plastic and lexan
plastic •Great on chrome and metal •19 oz.
aerosol can •Mfr. #051135-08888
MCM Part #
108-4285
www.MCMelectronics.com /1-800-543-4330
ONLY
$3.99
1189
11
Cleaning and Chemicals - Repair Chemicals
Imperial Hand Glaze
•Unique combination of paint
glossifiers provides a brilliant, deep, wet
look finish •Shines and protects “new”
and “like new” paint finishes •16 oz.
bottle •Mfr. #051131-39007
MCM Part #
108-4295
ONLY
$12.99
Mag and
Aluminum Polish
•Safely removes oxidation, water
spots, stains, brake dust and other
residue from non-coated magnesium
and aluminum wheels •Restores luster •Leaves an
incredible shine •10 oz. bottle •Mfr. #051131-39529
MCM Part #
108-4270
Super Seal
Refrigerant Sealant
Platinum™
Plus Body Filler
•Platinum™ plus filler is a creamy formula that
adheres to a variety of surfaces and fills gaps and
spaces •Cuts sanding time to as little as 15 minutes
•Adheres to galvanized steel, aluminum, E-coat,
fiberglass and many more surfaces •Vacuum processed
and pinhole free •Stain and tack free •6 oz. cup
MCM Part #
108-4615
ONLY
$6.99
Rubber Keypad Repair Kits
•Quickly, and
permanently repairs A/C
and refrigeration leaks •Compatible
with all oils and refrigerants •Ideal
for preventative maintenance and
hard to find seasonal leaks •Easily
installed in minutes with complete
one-time-use kit •Seals multiple
leaks •Environmentally friendly
MCM Part #
Mfr. #
20-4880
944KIT 20-4882
947KIT ONLY
$10.99
Description
Units using more than
4 lbs. refrigerant
Units using less than
4 lbs. refrigerant
ONLY
$54.99
49.39
Rubber Rejuvenators
CaiKote 44 Conductive Coating
™
Ideal for repairing membrane
buttons, keyboard buttons, and other
carbon based conductive surfaces
that have worn out over use. •Simple
one step process •Kit includes 1 gram
carbon based conductive coating
•Mfr. #K-CK44-G
Wheel and Tire Cleaner
•Quickly and beautifully cleans
wheels and tires in one easy step
•Removes brake dust, road tar, grease
and grime •Cleans soil and scuffs
from tire side walls and leaves wheels
with a brilliant shine •16 oz. bottle
•Mfr. #051131-39036
MCM Part #
108-4305
MCM Part #
200-315
(1-3)
$9.99
CaiKleen
RBR Rubber Cleaner
(4-up)
$9.49
•Precision cleaner for rubber
rollers and platens to prevent
misfeeds and jams •Ideal for
computers, printers, copiers,
fax machines and other office
equipment •Also used for
auto detailing on all rubber
parts of vehicle.
ONLY
$6.99
Scratch Remover
•Safely and effectively removes grade 1200
or finer sand scratches, other fine scratches,
medium oxidation, water marks, and leaves
a fine finish •Excellent for hand
compounding applications •Clear coat
safe •8 oz. bottle •Mfr. #051131-39044
MCM Part #
108-4310
ONLY
$8.99
Rubber Keypad Repair Kit
•Restores electrical conductivity to worn carbon
contacts •Forms a tough, flexible, wear-resistant
surface •Repairs over 50 rubber button contacts
•Repairs tested to 500,000 keystrokes •Includes:
Adhesive 3g (0.1 oz.), curing agent 0.3g (0.01 oz.),
stir sticks, and applicator swabs •Mfr. #CW2605
MCM Part #
20-3890
Plastic Polish
MCM Part #
108-4320
ONLY
$6.99
Car Wash Soap
•Removes dirt and grime without
removing your wax protection •Long
lasting suds •Clear coat safe •16 oz.
bottle •Mfr. #051131-39000
MCM Part #
108-4340
1190
ONLY
$10.49
Premium Leak Detector
•Quickly identifies gas and air leaks in
pipes, hoses, compressors, fittings,
appliances and more •Ready to use
formula bubbles when exposed to
leaks •Meets or exceeds strict Telco
performance specs •No ethylene glycol
•Non-flammable, non-toxic and nonhazardous •All-weather formula
•16 oz. bottle
MCM Part #
20-5405
MCM Part #
Mfr. #
200-200
RBR100L-25C
200-201
RBR100L-2
200-202
RBR100L-12
ONLY
$24.99
HVAC Chemicals
•Safely and effectively removes hairline
scratches and other minor imperfections
from automotive plastics •8 oz. bottle
•Mfr. #051131-39010
ONLY
$5.49
www.MCMelectronics.com /1-800-543-4330
®
Description
Liquid, 100% solution, 25 ml
Liquid, 100% solution, 59 ml
Liquid, 100% solution, 354 ml
ONLY
$11.49
21.99
44.99
Rubber Rejuvenator
Specially designed, hydrocarbon cleaner cleans
and revitalizes rubber rollers and platens. Ideal
for copiers, fax machines, computer printers
and other office equipment. Improves rubber
grip and reduces misfeeds and jams. Comes
in 2 oz. anti-static plastic squeeze bottle.
MCM Part #
20-1890
(1-5)
$8.59
(6-11)
$8.39
(12-23)
$8.29
(24-up)
$8.04
Rubber Drive Cleaner
•Cleans and revitalizes rubber
•Removes glazing effect on old
belts and idler wheels •1 oz.
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-230
$3.99 $3.94 $3.71 $3.53
Follow us on:
&
Static Chemicals - Cleaning
and Chemicals
Projection TV Coolant
ESD Mat Cleaners
Fax Machine Cleaning
Sheet Four Pack
•Projection TV heat transfer fluid
used by many large screen television
manufacturers •Used in projection
TV guns •16 oz. bottle
A convenient, lint free sheet
designed to remove dust and
film from the paper path,
rubber rollers and scanner,
ensuring that each faxed
message is transmitted smoothly. Features: •One sheet
per foil pouch, four pouches per pack •8" x 11"
•Mfr. #8015 4PK
MCM Part #
20-4275
MCM Part #
20-2913
Projection TV Coolant
(1-11)
$9.99
(12-23)
$9.04
(24-up)
$8.99
(1-5 pkgs.)
$9.99 (6-11 pkgs.)
$9.69 (12-23 pkgs.)
$9.59
32 oz. Reztore™ Anti-Static
Surface and Mat Cleaner
•Ideal for cleaning static dissipative mats,
conductive mats, computer monitors, and
keyboards •Static dissipative solution
cleans and restores ESD mats •Leaves no
insulative residue and will not degrade
surface’s ability to drain charges
•Removes contaminants •Will not
dry out mats •12 bottles per case
MCM Part #
21-6960
Anti-Static Wipes
Hand Pump
•Hand pump may be used to remove
CRT coolant from the CRT housing
•Saves time and easy to transport
•Pump measures 9" (L) x 11⁄4" (D)
•Includes 8' of clear 11⁄16" O.D. tubing
which may be cut to custom lengths
•Tubing may be easily adapted to other
custom sizes by purchasing adaptors available at local
hardware stores •Pump is rated for 4 oz. per stroke
MCM Part #
22-2780
ONLY
$34.99
Keep equipment clean
and static free! Ideal
for use on hard surfaces
such as plastic, non-painted
metal and glass. Features:
•Long-lasting, non-toxic
and biodegradable •Helps prevent dust build-up
•Safe for all electronic equipment •Helps prevent
system interruptions and static discharge shocks
•24 individually foil wrapped wipes per box
•5" x 11" •Mfr. #SW12
MCM Part # (1-5 bxs) (6-11 bxs) (12-23 bxs) (24 bxs-up)
20-2900
$5.99 $5.81 $5.75 $5.64
Anti–Stat Spray
•Make any surface ESD safe with this
permanent coating that goes on as easy
as spray paint •Crystal clear •Surface
resistivity of 107~109ohm •Humidity
independent •Adheres to most materials
including glass, plastics, wood, metals,
and more •8 oz. can coats approximately
200 ft2 •12 cans per case
(1-5)
$39.99
(6-11)
$39.25
(12-23)
$38.78
MCM Part #
20-486
(1-5) $8.99 (6-11) $8.09 (12-23) $8.01 (12-up)
$10.44
One of the most widely used mat cleaners
on the market. Ideal cleaner for table tops,
chair mats or anti-static mats. Removes
dirt, flux residue, oily finger marks and
more. Features: •Eliminates unsightly film
or other residue that may build-up on
static-sensitive areas •Maintains original
surface resistivity of anti-static mats and
workbenches •Contains no alkali or
ammonia •Non-abrasive •Designed for
cleaning any production area in
assembling, testing or handling sensitive
electronic components •32 oz. spray bottle •Mfr. #6001
(1-5) $5.99 (6-11) $5.82 (12-23) $5.71 (24-up)
$5.53
Static Free™ Mat and
Benchtop Reconditioner
Provides maximum static control. For use
on carpet, hard floors, cabinetry, work
stations, CRT screens, paper, glass, fabrics,
plastics and other materials. One quart (32
oz.) bottle includes pump trigger spray for
efficient application. 12 bottles per case.
Mfr. #2010.
Licron Crystal ESD Coating
(1-11)
$10.99
Mat and Table Top Cleaner
MCM Part #
20-2890
Static Control Chemicals
MCM Part #
20-4520
11
(24-up)
$7.85
(24-up)
$37.74
•A static dissipative cleaner and
reconditioner used for revitalizing and
cleaning burned and dead spots on ESD
mats • Ideal for benchtops, tool cribs
and assembly surfaces •Won’t dry
out or damage ESD mats •Neutral pH
•Noncorrosive, chloride and amine
free •Nonabrasive •Works at low
humidity •16 oz. bottle with trigger
sprayer •Mfr. #ES1664T
MCM Part #
20-5150
ONLY
$15.49
Anti-Static Spray
•Formulated especially for static sensitive
computer and electronic user environments
•Use on floors, carpeting, cabinetry, work
surfaces, CRT screens, paper, glass, fabrics,
plastics and other materials •Nonflammable,
clear does not stain or discolor
fabrics •Reduces dust attraction
•Biodegradable •16 oz.
Anti-Static Foam Cleaner
for Glass and Plastic
A specially designed formula for general
external cleaning of glass and plastic
materials. Features: •Leaves no film while
keeping equipment clean and static free
•15 oz. aerosol can •Mfr. #8072
MCM Part #
20-2935
(1-5) $6.99 (6-11) $6.92 (12-23) $6.82 (24-up)
$6.70
MCM Part #
20-485
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
(1-5)
$5.49 (6-11)
$5.30 (12-23)
$5.05
www.MCMelectronics.com /1-800-543-4330
1191
11
Cleaning and Chemicals - Adhesives
Super Glue
C
Scotch-Weld™
Instant Adhesives
A
D
A
Super Bonder 495
•General purpose instant adhesive ideal for bonding
rubber, metal and plastic parts with gaps •.1 oz.
B
•Used for bonding,
joining, attaching,
assembling and
adhering a variety
of substances
•Low, medium and
high viscosity adhesives provide a solution for a wide
range of applications •Surface activator (#108-4705)
primes and accelerates cure on most surfaces
MCM
Fig.Part #
Mfr. # Description
Size ONLY
A 108-4645 PR100 Plastic and rubber 1 oz.$15.49
B 108-4650 CA100 Clear, instant 1 oz. 34.99
B 108-4655 CA4 Medium viscosity, for 1 oz. 29.99
plastics and rubbers
B 108-4660 CA4 Medium viscosity, 2 g 5.49
for plastics and rubbers
B 108-4665 CA40 High viscosity, for
1 oz. 29.99
plastics and rubbers,
EPDM
B 108-4670 CA40H High viscosity slow 1 oz. 31.49
set, for plastics and
rubbers, EPDM
B 108-4675 CA5 High viscosity gap 1 oz. 29.99
filler, for plastics
and rubbers
B 108-4680 CA7 Fast setting, 1 oz. 29.99
for metals
B 108-4685 CA8 High strength 1 oz. 29.99
30 second, for metals
B 108-4690 CA8 High strength 2 g 5.49
30 second, for metals
B 108-4695 CA9 High strength 1 oz. 28.99
50 second, for metals
C 108-4700 CA50 Slow cure, gel
20 g 35.99
D 108-4705 021200Instant surface
2 oz. 15.49
-87937 activator
MCM Part #
20-1520
(1-3) $3.49 (4-up)
$3.39
Superbonder Instant Adhesives
®
•Instant adhesives for smooth surface
materials that set-up in seconds •Bonds
strength up to 3500 psi •Temperature
range: -65°~180°F •416 gap filling
adhesive fills gaps up to 0.008" •495
general purpose adhesive works on
almost any surface •Clear in color
•1 oz. bottle
MCM Part # Mfr. # Description
20-2966
416
Gap filling
20-2969
495
General purpose
(1-4)
$20.99
17.99
(5-up)
$19.73
16.94
MCM Part #
108-4710
®
MCM Part #
20-2963 20-2964 20-2968 20-2965 Description 401 in 0.1 oz. tube 401 in 0.7 oz. bottle 404 in 0.33 oz. bottle 410 in 0.7 oz. bottle (1-4) $5.19 20.99 20.99 21.99 (5-up)
$4.98
19.71
19.46
20.80
MCM Part # (1-5)
20-3065
$1.99
(6-11)
$1.79
Plastic Surgery™
•Unique liquid glue specifically formulated to bond
plastics more securely than other instant glues
•Engineered to “bite” into plastic materials •Dripproof, clog proof applicator tip provides a fine,
controlled flow •Great for acrylic, nylon, fiberglass,
plexiglass, polycarbonate, polyester, PVC, urethane,
and more •3 gram applicator
(12-23) (24-up)
$1.77
$1.73
Super Glue
MCM Part #
20-4488
•One drop makes a strong,
permanent bond on most materials •3 grams
ONLY
$3.79
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-350
$1.99 $1.94 $1.85 $1.77
Super Glue
•Drip-proof, clog proof applicator tip provides a fine,
controlled flow •Patented cap design keeps glue
from drying out •Industrial strength •Works
great with metals, wood, glass, rubber,
and plastics •10 gram applicator
MCM Part #
20-2970
(1-4) $11.99 MCM Part #
20-4490
ONLY
$4.99
(5-up)
$11.45
Plastic Surgery™ Super Gel
•Unique liquid glue specifically formulated to bond
plastics more securely than other instant glues or
gels •Gap filling gel helps adhere uneven surfaces
•Engineered to “bite” into plastic materials •Great
for acrylic, nylon, fiberglass, plexiglass, polycarbonate,
polyester, PVC, urethane, and more •3 gram applicator
Super Glue Six Pack
•General purpose surface insensitive adhesive
•Ideal for porous materials including metal, plastic
or rubber •Nonflowing gel •Bonds instantly •.1 oz.
•Extra strength
formula bonds nonporous surfaces
instantly •Dries
clear •3g tubes •Mfr. #351
MCM Part #
20-1515
MCM Part #
20-4885 454 Gel
1192
Fig.
A
A
B
C
ONLY
$0.99
(1-3) $4.99 Prism Instant
Adhesives
Super Glue
A low viscosity, fast-curing adhesive used for
bonding rigid metal assemblies. Ideal for gap
distances up to 0.005", fixes in just ten
minutes and provides a shear strength of 3000
psi. after 24 hours. Easily joins dissimilar
metals and withstands temperatures up to
250°F. Locks keys, splines, and bearings.
Green in color. •0.34 oz. bottle •Mfr. #609
•This instant adhesive is ideal
for glass, metal, jewelry and
other lightweight surfaces
•Gel formulation lasts longer
in tube •No drip formula
•Sets up in 30 seconds
•Includes two .07 oz.
tubes •Mfr. #18008
C
Prism® adhesives offer an
instant adhesive for just
about any surface under
any condition. 401: A
surface insensitive adhesive that is clear liquid. Bonds
many hard to bond materials including: Plastics, cork,
wood, cardboard, foam, and metals. Temperature
range: -65°~180°F. 404: A Quick Set™ adhesive that is a
clear liquid and is used for general maintenance and
repair. Bonds rubber, plastics, metal, cardboard, and
wood. 410: Toughened adhesive that is black liquid
and has a greater resistance than conventional
adhesives. Temperature range: -65°~250°F.
•One drop makes a strong, permanent bond on
most materials •3 grams
609 Retaining Compound
Super Glue Gel
B
(4-up)
$4.65
ONLY
$3.69
www.MCMelectronics.com /1-800-543-4330
MCM Part #
20-4494
ONLY
$2.59
Follow us on:
&
Adhesives - Cleaning
and Chemicals
Rubberized Adhesives
11
Epoxy
Sureflex Multi-Purpose Adhesive
Black Max 380 Adhesive
®
It is the adhesive that is used by a variety
of speaker manufacturers to bond all the
joints of the speakers, except for the ferrite
components. Its high temperature resistance
(up to 250°F) and toughness make it a must
for automotive speakers. Not only is it used
for speakers, but it is hard to find an adhesive
that handles so many different applications,
from automotive rubber seals to golf club
manufacturing. It bonds 2~5 times better than other
instant adhesives, at room temperature. One part, no
mixing, can be used for potting and better than most
epoxies. Maximum cure time: 80% in 24 hours and
100% in 120 hours. Black in color. Available
in two different sizes.
MCM Part #
20-2960
20-2961
Size 0.10 oz. tube 1 oz. bottle (1-4) $5.09 27.79 (5-up)
$4.88
25.20
•Professional contact adhesive that
blends with black colored moldings and
weather stripping materials •Withstands
temperature extremes and is resistant to
gasoline, kerosene, and other solvents
•Fast drying, waterproof •5 oz. tube
(1-4)
$6.19
(6-11)
$10.19
•High-performance epoxy applicator system accurately
measures and thoroughly mixes bonding compound
•Provides a portable, consistent, air-free mixture of
epoxy for hard to reach places •Saves valuable time
and adhesives waste •Ideal for hobbyist and
manufacturers •Use the epoxy adhesive duo-pak
#108-555 and mixing nozzles #108-560
Spray Adhesives
24oz. Super 77™
Multipurpose Adhesive
MCM Part #
108-555
108-560
•Multipurpose industrial-grade adhesive
used extensively in autosound and
cellular installations •Securely bonds most
lightweight materials including metal foil,
plastic films, polystyrene foam, flexible
foam, fiberglass insulation, and more
•High coverage and fast aggressive tack
(1-5)
$14.69
(6-11)
$14.25
MCM Part #
108-902
(1-11) (12-23) $23.99 $23.19 Description
3M™ Scotch-Weld™ epoxy adhesive DP-100
3M mixing nozzles
ONLY
15.39
2.19
(12-23)
$13.11
Rear View Mirror Adhesive
•Used to attach rear view mirror
bracket or cellular antenna to windshield •Also
bonds metal to metal, glass to metal, and glass to
glass •Use included accelerator followed by adhesive
for a fast, strong bond •Single use pack •Mfr. #340
High temperature spray adhesive will not
cavitate expanded polystyrene foam. Non
misting spray control has variable spray
width pattern. Ideal for bonding carpet,
door skins and fabric in custom auto and
van conversions. Ultimate shear strength
100 psi. 18.15 oz. can
(5-up)
$5.83
(12-23)
$9.82
™
Scotchweld™
Epoxy Adhesive Applicator System
ONLY
$5.49
High-Tack 76
Spray Adhesive
•For gluing porous or semiporous materials
together or to nonporous materials •Vibration
resistant •Great for repairing speaker cones
•Quick drying, waterproof and clear
•2 fl. oz. bottle with brush
(1-5)
$10.49
Shown complete
#108-555
#108-560
™
Radio and TV
Service Cement
MCM Part #
20-875
MCM Part #
20-4890
MCM Part #
108-545
Black Contact Adhesive
MCM Part #
20-4144
•Multi-Purpose adhesive creates a flexible
bond making it useful for a variety of
surfaces •Use for plastics, vinyl, leather,
suede, speaker tears and more •Never
becomes brittle •Dries clear •1oz. tube
•Mfr. #360
MCM Part #
20-4895
ONLY
$2.49
(24-up)
$21.34
Cold Weld
(24-up)
$9.66
•General purpose adhesive excellent for
bonding wood, metal, plastic, rubber,
glass, leather and much more
•High strength, fast tacking adhesive spray
•Designed to work on a variety of substrates
•Transparent, low-soak-in product exhibits
particular strength bonding surfaces such
as drywall, brick, and concrete block •Also
bonds well to wood, foams, paper, and plastic
•For both temporary and permanent bonds
•Contains no CFCs or other ozone depleting
substance •11 oz. can •Mfr. #3500-11S
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-1315
$9.99 $9.39 $8.84 $8.49
MCM Part #
20-3865
GC Bond
Toughened
Rubber Adhesive
•Rubber toughened black adhesive for
speaker repair or where flexibility and
durability are required •High viscosity
(3000~6000 Centipoise) •Medium
curing •Temperature range: -50°~100°C
(-58°~212°F) •Shear tensile strength
250 kgf/cm2 (3500 lbs/in2) •20g •Mfr. #401DP
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-4545
$12.99 $11.93 $11.52 $10.98
Cold weld two part
bonding compound
works on aluminum,
bronze, iron, steel, brass and more. Resistant to shop
fluids including water, diesel fuel, gasoline and more.
Sets in as little as 15 minutes, reaches full cure in 16
hours. Can be drilled, tapped, filed and sanded.
•Two 1 oz. tubes •Mfr. #14600
Heavy-Duty
Adhesive Spray
(1-11)
$8.99
(12-23)
$8.24
Maximum
Strength Headliner Adhesive
•Bonds foam, carpet, fabrics, plastics,
rubber, etc. •Resistant to extreme
weather conditions •Water resistant
•16.75 oz. can
MCM Part #
20-4142
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
(1-4)
$11.39
(5-up)
$10.89
MCM Part #
20-2065
(24-up)
$7.77
(1-3) $4.79 (4-up)
$4.43
Fast Cure Epoxy “Mixercups”
Each individually sealed
“mixercup” contains the correct
proportions of epoxy and
hardener. Simply peel off the
cover, press the bottom of the
cup with the included mixing
stick and stir. Fast ten minute
fixturing bonds metal, ceramic,
concrete, wood and glass.
Ten premeasured cups per package. Dries gray.
MCM Part #
20-1865
(1-3 pkgs.) $23.99 www.MCMelectronics.com /1-800-543-4330
(4 pkgs.-up)
$23.49
1193
11
Cleaning and Chemicals - Adhesives
Threadlocker 290 Green
Metal Magic Steel™
Putty Stick
•Ten minute repair epoxy •Industrial strength steel
filled epoxy •Adheres to damp surfaces and cures
underwater •Fast-workable for three minutes and
sets in ten minutes •Use as putty or as an adhesive
•No measuring or mess-just cut off what you need
•Chemical and corrosion resistant •Can be
drilled, filled, and painted •4 oz. stick
MCM Part #
20-4148
(1-4)
$16.99
(5-up)
$15.49
Strong Steel Stick Epoxy
•Hand-kneadable, ready to use stick permanently
fills gaps and holes in metal, concrete, wood, fiberglass
and ceramics •Also patches holes and cracks in pipes,
drums and tanks making it useful for emergency
repairs •Hardens like steel in 20 minutes •Can
be machined, drilled, tapped and painted
in 30 minutes •Plugs and seals leaks •Can
be used for underwater repairs •4 oz. tube
MCM Part #
20-5415
90 Second Epoxy
Polyurethane Glue
•Rapid curing-bond sets in 90 seconds,
can be handled in five minutes, and
full strength in one hour •Great for
bonding metals, ceramics, glass, rubber,
wood, plastics, fiberglass, and more
•Works with inconsistent surfaces
•14ml net volume syringe •Mfr. #336
MCM Part #
21-12425
21-12430
1194
(1-3)
$11.59
(4-up)
$11.54
Arctic Silver™ Silver Thermal Adhesive
•This thermal adhesive is permanent so the
components you attach will stay attached forever
•Provides excellent thermal conductivity •Made with
99.8% pure micronized silver •62~65% silver content
by weight •Formulated to conduct heat, not electricity
•Temperature range: -40°C~150°C •Mfr. #ASTA-7G
Includes: •Two 3.5 gram tubes (Part A and Part B)
•Plastic mixing wand
Threadlocker
•Medium strength general purpose adhesive
ideal for most any nut and bolt application
•Resists shock and vibration •Easily
removable with hand tools •Available
in two different sizes.
ONLY
$19.99
19.99
•Low strength adhesive ideal for small
fasteners, screws and components requiring
occasional adjustment •Perfect for set screws,
adjustments screws, calibration screws and
much more •.34 oz. bottle •Purple in color
MCM Part #
20-1535
Threadlocker 242 Blue
Description
Multicolor
Black/White
Threadlocker 222
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-4555
$4.69 $4.59 $4.44 $4.35
(6-11) (12-up)
$9.89 $9.61
•Molds and sets
permanently and will stick to a variety of surfaces
including aluminum, steel, ceramics, glass, wood
as well as some fabrics and plastics •Ideal for repair
work, strengthening cables, mounting components
and other small objects, insulating wires and much
more •Self-adhesive to most materials •Flexible
when cured •Forms by hand without tools •Colors
can be mixed •Waterproof and dishwasher safe
•UV resistant •21-12425 includes eight 5g mini-packs
(two each of blue, yellow, red, one each of black
and white) •21-12430 includes eight 5g mini-packs
(four each of black and white)
(5-up)
$12.49
Python Glue
All Purpose Adhesive
Sugru™ Moldable
Silicone
Rubber Packs
(1-4) $13.49 •High-strength polyurethane adhesive
used to bond tough projects including
wood, ceramics, stone, and metal
•Superior to other polyurethane glue
for adhering metal to other surfaces
and dries harder •Use with damp or
dry surfaces •Sandable •Fully cures
in 72 hours •2 oz. bottle •Mfr. #352
•General purpose, clear ethyl cyanoacrylate
for bonding most materials •High viscosity
(1200~1500 Centipoise) for better tack
and gap filling •Medium/slow curing
•Temperature range: -50°~80°C
(-58°~176°F) •Shear tensile strength 220
kgf/cm2 (3129 lbs/in2) •20g •Mfr. #412
NEW!
MCM Part #
20-2958
Thermal Adhesives
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-4525
$4.99 $4.79 $4.62 $4.41
MCM Part # (1-5)
20-4535
$9.99
ONLY
$12.29
Low viscosity threadlocking liquid. Wicks
along the threads of pre-assembled fasteners
to secure them in place. Ideal for fasteners
ranging from #2~1⁄2" in size. Localized
heating and hand tools are needed for
disassembly. 0.34 oz. bottle.
MCM Part #
20-1530
20-2955
Size 0.34 oz.
1.69 oz.
(1-3) $13.49 36.69
MCM Part #
20-4975
ONLY
$17.99
NEW!
(4-up)
$12.47
35.17
Arctic Alumina™ Ceramic Thermal Adhesive
Threadlocker 271 Red
High strength for heavy-duty applications.
Especially well-suited for permanently
locking studs and press fits. Replaces
set screws and snap rings. Locks against
vibration loosing. Requires extra effort or
special tools for removal. 1.69 oz. bottle.
•This thermal adhesive is permanent so the
components you attach will stay attached forever •Uses
a layered composite of aluminum oxide and boron
nitrade •Pure electrical insulator, neither electrically
conductive or capacitive •Temperature range:
-40°C~150°C •Mfr. #AATA-5G Includes: •Two 2.5
gram tubes (Part A and Part B) •Plastic mixing wand
MCM Part #
20-2957
MCM Part #
20-4980
(1-4)
$35.49
(5-up)
$33.96
www.MCMelectronics.com /1-800-543-4330
ONLY
$7.19
Follow us on:
&
Adhesives - Cleaning
and Chemicals
11
Adhesive Removers and Solvents
PCB Repair
X-NMS™ Solvent
TAK–PAK PCB Repair Kits
®
Perfect for adhering lifted
circuit pads and traces, bounding
components for strain relief, wire
tacking, and many other typical
problems associated with printed
circuit board repair and assembly.
TAK–PAK® 444 is a general
purpose kit that is used for
temperatures up to 180°F and includes 1.75 oz. of
7452 accelerator, 0.70 oz. of 444 adhesive and two
applicator tips. TAK–PAK® 382 is an ultra performance
adhesive that is used in temperatures up to 223°F,
with stands temperature cycling and burn–ins.
Kit includes: 0.70 oz. of 7452 accelerator, 0.70 oz.
of 382 adhesive and two applicator tips.
MCM Part #
20-2948
20-2949
Description
TAK-PAK® 444 kit
TAK-PAK® 382 kit
(1-4 kits)
$27.49
39.99
(5 kits-up)
$26.97
38.79
Quickly and safely dissolves cured
cyanoacrylate-based adhesives in bonds
or on equipment, clothes and other surfaces.
•2 fl. oz. bottle includes applicator brush
•Mfr. #76820
MCM Part #
20-2060
Silicone Rubber Sealant
(1-3) $27.49 (4-up)
$25.76
MMC Part # Color
20-280
Clear
20-281
White
Radio and
TV Service Solvent
MCM Part #
20-880
(1-5) $9.39 (6-11) $9.01 (12-23) $8.54 (24-up)
$8.32
Removes silicone and other types of protective
coatings from PC boards. Required when
protective coating interferes with the
desoldering and soldering operation.
2 oz. bottle.
Plas-T-Pair
•Excellent for fixing broken plastic
knobs, plastic cabinets, etc. •This two
part kit can be used as an extremely
strong fast setting, waterproof glue;
which will bond almost any material •No clamps or
pressure is needed when bonding with Plas-T-Pair
Kit contains: •30cc Plas-T-Pair liquid, 24 grams
Plas-T-Pair powder and precision eyedropper
(1-5)
$12.49
(6-11)
$12.34
(12-23)
$12.10
(24-up)
$11.84
MCM Part #
20-882
(1-5) $7.79 (6-11) $7.44 (12-23) $7.17
(24-up)
$6.93
MCM Part #
20-980
(1-5)
$7.99
(6-11)
$7.89
(12-23)
$7.74
(24-up)
$7.52
Sealants
“Tak-Pak” 7452 Accelerator
•Metered-mist spray accelerator speeds
cure time to 60 seconds and fixture time
to 3~5 seconds •Acetone base
MCM Part #
20-1850
(1-3) $15.99 (4-up)
$15.11
Strip-Calk
(box)
$14.99
Coax Seal
•Metered-mist spray accelerator speeds
cure time to 60 seconds and fixture
time to 3~5 seconds •Alcohol base
•Hand-moldable plastic seal
is perfect for sealing outdoor
connections and cable splices
•1⁄2'' width •60'' length
(4-up)
$11.96
(24-up)
$4.49
4.52
General-purpose, RTV indoor/outdoor sealant
is perfect for securing speakers to cabinets.
Seals, bonds, repairs, mends and secures
glass, metal, plastics, fabrics, vinyl and
weather stripping. Protects and repairs
electrical wiring. May be applied to
horizontal or vertical. Waterproof and flexible
with a temperature range of: -80°~450°F. 3
oz. tube. Available in black or clear.
MCM Part #
20-2983
20-3880
Color
Black
Clear
(1-4) $5.29 5.69
(5-up)
$5.05
5.35
Kwik Foam‚
Insulating Sealant
•Polyurethane expansion foam fills
and seals large cavities •Effectively
stops air infiltration, won’t shrink
and dries hard •Contains flameretardants •Tan color •24 oz. can
ONLY
$21.49
•Used for
sealing or filling joints,
seams, and cracks •Stays
soft and pliable •Ideal
for sealing speaker enclosures •Can be painted after
installation •Black in color •1' lengths, 60 per box
“Tak-Pak” 712 Accelerator
(1-3) $12.99 (12-23)
$4.69
4.64
RTV Silicone Adhesive Sealant
MCM Part #
20-3695
MCM Part #
108-3190
MCM Part #
20-1855
(6-11)
$4.89
4.79
Polystyrene Q-Dope Thinner
•Used to thin polystyrene based coil dopes
and cements •Can also be used for cementing
polystyrene materials •2 fl. oz. bottle
Adhesive Accelerators
(1-5)
$4.99
4.89
•For dissolving cement commonly used
in radio and TV equipment •Fast-acting
•May also be used as a thinner for all
lacquer type cements •2 fl. oz. bottle
Print Kote Solvent
MCM Part #
20-1090
•Pure silicone •Excellent weatherproofing for antenna
installations, etc. •Flexible, won’t crack or shrink
•Adheres to glass, wood, most metals, plastic/rubber,
fiberglass, and painted surfaces •Use for sealing
connections on triplers and flybacks •Also ideal
for sealing gaskets, withstands high temperatures
up to 400° •Flows easily, no mess •2.8 oz.
MCM Part #
33-10945
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
(1-9)
$1.89
(10-24)
$1.73
(25-49)
$1.66
(50+)
$1.61
The Right Stuff™ Gasket Maker
Perfect for sealing speakers to cabinets.
Makes a leak proof gasket in just one
minute and stays flexible. This latest rubber
gasket technology is blowout resistant and
out performs pre-cut gaskets. Resistant
to most oils and solvents. Temperature
range: -75°~450°F. Automatic tube
dispensing system. •4 oz.
MCM Part #
20-2975
(1-4) $17.49 www.MCMelectronics.com /1-800-543-4330
(5-up)
$17.34
1195
11
Cleaning and Chemicals - Sealants & Greases
Rubber Coating
Conductive Grease
Arctic Silver 5
®
Color Guard
Tough Rubber Coating
®
•Tough rubber coating protects, seals,
insulates, and improves grip •Rubber
coating will not crack or chip •Lasts for
years •Restores look to worn out tools
•Applications include tools, metal,
electrical connections, masonry,
wood, glass, etc. •14.5 oz.
MCM Part #
20-4152
20-4156
Color
Black
Red (1-4)
$14.99
13.99
(5-up)
$13.51
13.22
Silver Conductive Grease
•Provides maximum electrical and thermal
conductivity, lubrication and protection •The syringe
dispenser allows for precise application of grease
making it useful in filling connector gaps •Helps
control static discharge and ground circuits
•Protects against moisture and corrosion
•Thermally stable over a wide temperature range
•Contains pure silver •6.5 grams •Mfr. #CW7100
MCM Part #
20-4925 Electrical Insulators
Heat Sink Compounds
Liquid Tape
(1-5) $10.49 (6-11) $10.09 (12-23) $9.67 High-Voltage Putty
MCM Part #
20-975
(1-5) $6.99 (6-11) $6.79 (12-23) $6.69 (1-4pkgs.)
$3.29
(5 pkgs.-up)
$3.03
Boron Nitride
Heat Sink Grease
•Formulated for ultra-high efficiency heat transfer
between circuit components and heat sinks without
electrical conductivity •Provides maximum thermal
conductivity with superior dielectric properties
•Silicone free compound will not harden or dry out
•Electrically insulative •Noncorrosive •Nonflammable
•Thermally stable from -99.4°F/-73°C ~ 392°F/200°C
•3.4 g syringe •Mfr. #CW7250
Silicone free compound is applied under
power transistors and other heat generating
devices to assist in transferring heat to metal
chassis for dissipation. Designed to eliminate
silicone migration. Temperature range from
-40°C~200°C. •4 oz. squeeze tube
•Mfr. #1978-DP
(24-up)
$6.49
ONLY
$8.99
19.99
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-1975
$17.99 $17.09 $16.44 $15.72
Silicon Free Heat Sink Compound
•Insulating silicone rubber putty for
suppressing coronas and arcs in highvoltage systems •Great for coating sharp
points and edges which cannot be coated
with conventional sprays •Sticks to most
clean materials •Will not harden or shrink
•Nonflammable •11⁄4 oz.
Size
3.5 gram
12 gram
Single Use
Heat Sink Compound
MCM Part #
20-4505
Used to coat bases of power transistors and
semiconductors when assembling them to
heat sinks. Highly conductive grease draws
heat away from device allowing it to
run cooler. Net wt. 4 oz.
(24-up)
$9.25
MCM Part #
20-4434
20-4435
•Five-pack of single use
heat sink compound tubes
•Silicone base •Thermal
conductivity (K factor):
.001 •Temperature range:
-40°~400°F •1 gram per tube
Silicone Heat Sink Compound
•Heavy bodied black insulating coating which
replaces insulating tape in applications where
wrap-around tape cannot be applied •This
compound dries quickly to a strong pliable
finish that will not crack, peel or chip
•2 fl. oz. bottle with brush
MCM Part #
20-390
ONLY
$43.99
Optimized for use between modern high-power CPUs
and high performance heatsinks or water-cooling
solutions. •Contains 99.9% pure silver •Silicone free
•Not electrically conductive •Arctic Silver 5 will not
separate, run, migrate, or bleed •RoHS compliant
•Thermal conductance: >350,000W/m2°C (0.001"
layer) •Extended temperature limits: Peak:
-50°C~ >180°C, long-term: -50°C~130°C
MCM Part #
20-2145
Dialectric
(1-5)
$27.49
(6-11)
$26.19
(12-23)
$24.92
(24-up)
$23.81
MCM Part #
20-4606
ONLY
$14.99
Heat Sink Compound
•Excellent heat transfer and dielectric
properties •Noncorrosive •5 fl. oz.
MCM Part #
20-2680
(1-3)
$21.99
(4-up)
$21.39
Silicone Compound
•Soft, inert silicone grease with excellent dielectric
properties •Provides an excellent dielectric coating
which excludes moisture and helps prevent high-voltage
arcing •Provides an outstanding corrosion resistant
coating on exposed metal surfaces; such
as TV antenna terminals •1 fl. oz. tube
MCM Part #
20-400
1196
(1-5) $5.99 (6-11) $5.39 (12-23) $5.34 (24-up)
$5.23
Silicone Heat Sink Compound
•Used for heat transfer from semiconductor devices
to mounting points •White •Will not dry or harden
•1 oz. tube
MCM Part #
20-300
(1-5) $5.49
(6-11) $5.14
(12-23) $4.87
(24-up)
$4.62
www.MCMelectronics.com /1-800-543-4330
Ceramique™ Thermal Compound
•Thermal compound designed for high-power CPUS’s
and high-performance heatsinks or water-cooling
solutions •High-density layered composite maximizes
particle to particle contact area and thermal transfer
•Triple-phase viscosity provides superior performance
and long-term stability •Engineered to not separate,
run, migrate or bleed •Does not contain silicone
•Easy cleanup with isopropyl alcohol
MCM Part #
20-4950
20-4955
Mfr. #
CMQ-2.5G
CMQ-22G
Description
2.5 gram syringe
22 gram syringe
Follow us on:
&
ONLY
$3.79
7.49
Lubricants - Cleaning
®
•Polysynthetic thermal compound designed for use
between high-power CPU’s and high-performance
heatsinks or water-cooling solutions •Made with
a layered composite of three unique shapes and
sizes of ceramic particles to maximize contact
area and thermal transfer •Triple-phase viscosity
ensures easy application in a thin even layer
•Won’t separate, run, migrate or bleed
•Compound is not electrically conductive
or capacitive •Easy clean up using a dry cloth
MCM Part #
20-4960
20-4965
Mfr. #
AA-1.75G
AA-14G
Description
1.75 gram syringe
14 gram syringe
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-883
$5.59 $5.54 $5.37 $5.16
Phonolube
•Light bodied grease made of polymerized
oil •Specially developed for the lubrication
of small geared mechanisms such as
phonographs, record changers, TV channel
and record mechanisms, etc. •Retains its
viscosity over a wide range of temperatures
•2 fl. oz. tube
ONLY
$16.99
ONLY
$3.89
7.49
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-415
$9.99 $9.79 $9.54 $9.27
Precision Oiler
ArctiClean™ Thermal
Material Remover Kit
•Two-step cleaning process that
removes existing thermal greases
or pads and prepares surface for
a fresh application of thermal
interface material •Step 1 uses
non-toxic biodegradable solvents
to clean surface •Step 2 removes any residue left over
leaving a pristine surface •60mL kit includes 30mL
each of ArctiClean 1 and 2 •Mfr. #CAN-60ML
MCM Part #
20-4985
ONLY
$6.29
High Performance
Thermal Compound
Features: •Injector with cap for
easy application and storage •Two
templates ensure correct applying
area for various CPU socket types
•Produces even layer when using
applicator •No messy fingers when
done Features: •Excellent thermal
conductivity •Electrically non-conductive •Wide range
of application temperature •4.18W/mK conductivity
MCM Part #
83-10380
Dry powered graphite is ideal for metal, wood,
plastic and rubber. Will not harm plastics,
guards against sticking and dirt build up.
Ideal for locks, hinges, doors, wheels
and rubber parts. Net weight 32g.
•Premier rust and corrosion inhibitor
which forms a transparent, soft,
waxy film for both protection and
lubrication •Protects steel parts indoors
for up to two years •Also inhibits
exfoliation and filiform corrosion
of aluminum •Penetrates to displace
moisture •Does not contain chlorinated
solvents or silicone •Non-conductive
•Safe on most surfaces •11 oz. can
MCM Part #
20-5380
(1-9)
$2.49
•Duratool’s Precision Oiler is for the exact placement
of oil or any other lubricant •This product’s smooth
actuator allows for greater control and placement of
lubricant •Length: 5 5⁄8" •Pocket clip for convenience
•All aluminum construction •Protective screw-on
cap prevents all leakage •Oil not included •Mfr. #D00450
MCM Part #
22-11104
ONLY
$6.99
•Great for all metals including steel
and aluminum •Useful for tapping,
drilling and machining •Increases
tool life and improves surface
finish •Requires less product usage
than traditional cutting fluids
•Does not contain chlorinated
paraffins •Reduces cutting torque
and improves cutting efficiency
•Does not contain water, solvents,
or inactive fillers •16 oz. bottle
•Provides superior protection against
equipment exposed to a wide range
of operating temperatures and
environments •Use as a lubricant
and protective anti-rust film •3 oz. tube
MCM Part #
20-5385
ONLY
$13.29
®
•Formulated to extend belt life,
prevent belt slippage and resist water
wash out on flat, round and V-belts
•Eliminates squeaks from slipping
belts •Water resistant •Does not
contain chlorinated solvents that
deteriorate drive belts •Metal detectable
plastic components •May be used in
wet, outdoor conditions •10 oz. can
•Water-based cutting fluid used
in applications where cooling of a
tool is desired •Useful for drilling,
boring, grinding and reaming
•Non-hazardous •Does not
contain sulfur, chlorine or
oils •Safe on all metals, except
magnesium •Corrosion inhibitors
prevent flash rusting •Provides
fine finishes •Cinnamon scent
•16 oz. bottle
MCM Part #
20-5420
MCM Part #
20-5390
ONLY
$9.49
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-885
$4.19 $4.15 $4.03 $3.87
ViperLube™ High Performance
Synthetic Grease
®
Tapmatic
Aquacut Cutting Fluid
Belt Dressing
Luberex Lubricant
•Superior calcium stearate base grease
compound for general use in industry, shop
and home •Provides excellent lubrication
for appliances, hand tools, business
machines and bearings •Excellent
dielectric properties •2 fl. oz. tube
Tapmatic
#1 Gold Cutting Fluid
(10-up)
$2.43
Lubricants
11
Graphite Powder Lubricant
LPS 3 Premier
Rust Inhibitor
Arctic Alumina™ Thermal Compound
and Chemicals
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$11.49
MCM Part #
20-4160
(1-4) $6.29
(5-up)
$5.85
Professional
Garage Door Lubricant
•Provides high performance lubrication
for residential or commercial garage door
systems in a quick drying, no mess formula
•Useful on hinges, door tracks, chains,
pulleys and latches •Regular application
also prevents rust and corrosion •No
messy residue •Minimizes dust build
up •Smart straw system sprays
in a stream or sprat •Size: 11 oz.
MCM Part #
20-5276
ONLY
$6.99
White Lithium Grease
•White lithium grease type super lubricant
ideal for wiping contacts •Reduces friction
loss to a minimum •Retains consistency
over wide range of temperatures •Will
not oxidize or harden •1.75 oz.
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-1325
$5.99 $5.39 $5.34 $5.23
www.MCMelectronics.com /1-800-543-4330
1197
11
Cleaning and Chemicals - Lubricants
DeoxIT X10S Precision
Instrument Oil
®
White Lithium Grease
•Precision instrument oil for use on rubber,
metals and plastics •Provides non-gumming,
rust-inhibiting, long lasting lubrication
•Ideal for use on fine parts mechanisms
such as clocks, watches and other items
with small moving parts •Temperature
range: -60°C~232°C •Needle dispenser,
100% solution, 25mL •Mfr. #X10S-25C
•Heavy-duty lubrication and corrosion
protection that won’t melt, freeze, or run
in any weather •Perfect for: Hinges,
latches, overhead door tracks, winches,
cables, pulleys, gears, guide rails, slides,
motor pivot points, tools, blades, bits,
and all external moving parts •Works
great for metal-to-metal applications
•Prevents rust and corrosion •Highviscosity lubricant •Water and hear
resistant •Temperature range from 0ºF
to 300ºF •10 oz. aerosol can •Mfr. #110252
MCM Part #
20-4815
MCM Part #
200-375
Multi-Purpose Oil
•Lubricates, cleans, and prevents rust
•Has hundreds of uses in the home, car,
office, workshop, and more •No-spill
spout makes it essential for all sorts of
applications where precise control is
required •Perfect for small mechanisms
and assemblies, tool maintenance, and
threads on screws and bolts •20-5520
features a 6" telescoping spout
for precise control
Force 842°®
Dry Molly Lubricant
MCM Part #
20-5425
ONLY
$11.99
ONLY
$8.19
•Provides a quick-drying, thin film for
use in extreme temperature and pressure
applications •Useful in assembly and
break in lubrication applications •Dry
film resists dirt and dust •High adhesion
•Prevents seizures •Water and chemical
resistant •11 oz. can
ONLY
$16.99
MechanicALL™ Liquid
MCM Part #
20-3325
20-3330
20-5520
Size
3 oz.
8 oz.
4 oz.
(1-11)
$2.49
3.49
3.09
(12-up)
$2.10
3.35
-
•Highly penetrating liquid
loosens parts, stops squeals
and frees sticky mechanisms
•Dissolves corrosions and
grime •Displaces moisture
•Concentrated long lasting
formula provides lubrication
and protection from
corrosion •200-365 has an
adjustable flow aerosol valve
•20-366 has a needle
dispenser for precision application
MCM Part # Mfr. #
200-365
M20S-9
200-510
M100L-25C
Description
ONLY
Flammable, 9 oz.
$5.99
25mL needle dispenser 6.49
LPS 1 Greaseless Lubricant
•Light-duty lubricant •Water displacerdries out wet electrical/electronic components
•Helps restore water soaked electric motors
and components •Dries and protects coils,
relays, switches, connecters and wire
terminals •Safe on rubber, paint, plastic
and fabric •11 oz. can
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-420
$12.99 $11.82 $11.47 $11.36
Precision Instrument Oiler
•Use on metal, rubber, and plastic
•-76°~450°F (-60°~232°C) •Nonflammable •100%
solution •Squeeze pen applicator •6 ml •Mfr. #X10S-P
Chainmate®
Chain and Wire Rope Lubricant
•A wet film molly lubricant that provides
maximum lubrication and corrosion
protection for chains and wires •Reduces
wear caused by friction and corrosion
•Penetrates to the core of wire rope
•Performs under severe loads and in
extreme temperatures •Use with guards
in place to eliminate costly downtime
•Resists water wash out •11 oz. can
MCM Part #
20-5430
ONLY
$13.99
MCM Part #
200-370
(1-5)
$6.99
(6-11)
$6.36
(12-up)
$6.17
Reach-All
Pen Oiler
•Highly refined,
nongumming instrument oil in a convenient pen-like
dispenser •Excellent for in-field work •Comes with a
51⁄2" long reach extender and a pocket clip •1⁄2 oz.
MCM Part #
20-970
(1-5) $4.99 (6-11) $4.84
(12-23) $4.67
1198
(12-23)
$9.59
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-425
$12.99 $11.82 $11.47 $11.36
TKX All-Purpose Lube
•Safe on plastics •Non-flammable
•Displaces moisture •Contains special
corrosion inhibitors •Reduces friction
•Protects metal surfaces •Excellent
dielectric properties •Cleans, protects, and
lubricates all electronic switches, contacts,
relays, plugs, and sockets •Can be used in
extreme weather conditions •11 oz. can
•Mfr. #ES1626
(1-11)
$9.99
•Leaves light oily coating •Helps protect
most metals from corrosion for one year or
more •Lubricates and helps protect outdoor
electrical/electronic equipment, and parts
in storage •Reduces wear caused by friction
and corrosion •Safe on rubber, paint, plastic
and fabric •11 oz. can
(24-up)
$4.48
DPL™ Deep Penetrating Lubricant
MCM Part #
20-4472
LPS 2 General
Purpose Lubricant
•Displaces moisture while
providing a non-drying, long lasting,
oily film •Does not contain chlorinated
solvents or silicone •Nonconductive •Safe
on fabric, plastic, rubber, paint and other
finishes •11 oz. can •Mfr. #02016
MCM Part #
20-4755
ONLY
$6.89
(24-up)
$9.29
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
Lubricants - Cleaning
and Chemicals
11
LST Quick Penetrant
•Low surface penetrant attacks rust and
corrosion to free up frozen parts •Powerful
foaming action provides complete surface
coverage •Penetrates small cracks and
crevices •Works great on bearings, bolts,
chains, conveyors and much more
•Displaces moisture •Flash point of 175°F
•Compatible with most rubber and plastic
surfaces •Inverta spray valve lets you spray
upright or inverted •11 oz. can
MCM Part #
20-5300
NEW!
Specialist Line Products
™
ONLY
$8.49
WD-40®
•The classic WD-40 aerosol formula that
stops squeaks, protects metal, loosens
rusted parts, displaces moisture and over
2,000 more uses •12 cans per case Smart
Straw: •Never lose your straw with the
Smart Straw found on select sizes Big
Blast: •Quickly coat tools and large
amounts of parts with the special wide
spray nozzle No-Mess Pen: •WD-40 where
you want it; will not run or drip
MCM Part #
20-3312
20-3316
20-4390
20-3322
20-3323
Description
3 oz. Handy can
8 oz. Smart straw
12 oz. Smart straw
16 oz. Industrial size
18 oz. Big blast
(1-11)
$2.69
5.09
6.99
6.49
7.89
•WD-40 best-in class specialty products
provide easy solutions for specific jobs
•#20-5260 penetrant spray loosens
corroded nuts, bolts, threads and locks
while preventing rust and corrosion
build up •#20-5262 silicone lubricant
lubricates, waterproofs and protects both
metal and non-metal surfaces •#20-5264
white lithium grease provides heavy duty
lubrication and protection for metal on
metal applications •#20-5266 corrosion
inhibitor protects and lubricates metal part while
blocking rust and corrosion for up to two years •#205505 dry lube resists dirt, dust and oils as it lubricates
and protects against corrosion •#20-5510 machine
and engine degreaser removes grease, oil and grime on
engines, gears and other equipment electrical contact
cleaner removes oil, dirt, residues and condensation
form sensitive electronics
®
(12-up)
$2.49
4.72
6.43
6.08
7.44
MCM Part #
20-5260
20-5262
20-5264
20-5266
20-5505
20-5510
20-5515
Description
Size ONLY
Rust release penetrant spray
11 oz. $6.79
Water resistant silicone lubricant 11 oz. 6.99
Protective white lithium grease 10 oz. 6.99
Long-term corrosion inhibitor 6.5 oz. 13.99
Dirt and dust resistant dry lube 10 oz. 6.29
Machine and engine degreaser 18 oz. 5.49
Electrical contact cleaner
11 oz. 8.09
HD Silicone™ Lubricant
•A heavy-duty, food grade silicone
lubricant •Lubricates, waterproofs, and
protects in one application •NSF H1
registered •Ideal for use on plastics,
rubber, elastomers and gaskets •Stable
from -40°F~400°F •Reduces sliding
friction between dissimilar materials
•Odorless, tasteless, non-conductive and
non-staining •Ideal for metal-to-metal and
plastic-to-plastic applications •Contains
no chlorinated solvents •Ozone safe •10
oz. can •Mfr. #ES1623
MCM Part #
20-4474
(1-11)
$7.59
(12-23)
$7.39
(24-up)
$7.29
Silicone Lubricant
•High-grade silicone lubricant for use on
almost any surface •Forms an effective
silicone layer to lubricate and protect
rubber, plastic and metal parts •Food
grade, nonstaining, colorless and odorless
•13 oz. can
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-480
$10.99 $10.77 $10.45 $10.35
PTFE Lubricant
WD-40 Trigger Pro
®
•A non-aerosol trigger allows
you to use WD-40® in more
places •The original WD-40® formula
can be applied in a wide spray or narrow
stream with greater control •No-leak
recyclable steel container •20 oz.
MCM Part #
20-4620
ONLY
$14.99
MCM Part #
20-5285
ONLY
$12.99
Dry Film Silicone Lubricant
•Silicone based lubricant leaves an ultra
dry film that reduces the sticking of
sliding parts •Useful on conveyors,
compression molding, doors and more
•Won't attract dust or dirt •Reduces
friction and wear •Excellent for high
temperature applications up to 500°F
•Does not contain chlorinated solvents
•Non-flammable •12 oz. can
MCM Part #
20-5295
ONLY
$9.99
Magnum PTFE Lubricant
Industrial Grade Penetrant
•A high performance wet film lubricant
that improves performance and extends
equipment life by reducing friction on
wear •Ideal for heavy load applications
or regular use •Displaces moisture
•Protects against rust and corrosion
•Does not contain chlorinated solvents
•Safe on most surfaces •Flash point
of 175°F •Inverta spray valve lets you
spray upright or inverted •11 oz. can
•Industrial grade penetrant works fast
to free corroded fasteners and stuck
parts while protecting against corrosion
(very few penetrants do this) •Penetrates
tight crevices, threads and seems to
break the bonds that hold stuck parts
together •Perfect for: Nuts, bolts,
fasteners, pipes, fittings, locks, chains,
lug nuts, tools, and anything that’s
needs loosening •11 oz. aerosol can
•Mfr. #110269
MCM Part #
20-4820
•Dry film lubricant provides excellent
lubrication, reduces friction and wear
and is safe on most surfaces •Useful on
conveyor belts, injection molding, locks
and is ideal for releasing molded parts
•Won’t attract dust or dirt •Ideal for high
temperature applications up to 500°F
•No silicone or chlorinated solvents
•Petroleum base •12 oz. can
ONLY
$7.99
MCM Part #
20-5290
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$12.99
Slic™ Silicone Lubricant
Specifically formulated to lubricate,
protect, and waterproof mechanical
devices found in electrical and electronic
equipment. Displaces water. •10 oz. can
•Mfr. #2420-10S.
MCM Part #
20-4170
(1-11)
$17.29
www.MCMelectronics.com /1-800-543-4330
(12-23)
$15.98
(24-up)
$15.19
1199
11
Cleaning and Chemicals - Soldering Chemicals
Conductive Epoxy
Flux Dispensing Pen
60 Minute
Conductive Epoxy
•This epoxy system has a 60
minute pot life providing extended work
time •Silver epoxy provides excellent
electrical and thermal conductivity •Fully cured
material offers high strength conductive bonds
•Repairs defective traces and creates jumpers on
boards •Makes high-strength solderless conductive
connections Includes: •10 gram jar of adhesive
•10 gram jar of hardener •Mfr. #CW2460
MCM Part #
20-4920
•Ideal for applying flux with precision and control
•Chisel tip marker provides exact delivery of flux to
surface •Easily removed with appropriate flux remover
pen or Flux-Off® flux remover •Available in two pen
types •No Clean Flux Dispensing Pen: Applies a
patented noncorrosive, halide free, organic no-clean
flux and meets Bellcore TR-NWT-000078 and IPC
SF-818 for Surface Insulation Resistance •Rosin Flux
Dispensing Pen: Applies a noncorrosive type R flux
and meets MIL-F-14256 E+F Type R and
RMA •Both pens are 9 grams (0.32 oz.)
MCM Part #Mfr. #
Description
(1-4)(5-up)
20-3195 CW8100No-Clean flux dispensing pen$8.49$7.64
20-3200 CW8200 Rosin flux dispensing pen 7.99 7.19
Solder Flux
•A flux for all metals, as effective
as acid or chloride types but noncorrosive •Solders even hard-tosolder metals such as aluminum,
zinc-bases alloys, steel, etc. •Ideal for
soldering bus and ground wires to
aluminum and steel chassis, to
hermetically seal lids to metal cases,
for pot-tinning of copper and brass
parts •Not recommended for
electronic wiring including printed
circuits • 2 oz. bottle
MCM Part #
20-3910
(1-5)
$7.59
(6-11)
$7.27
(12-23)
$7.06
(24-up)
$6.89
ONLY
$99.99
Flux Pen #186
Conductive
Epoxy
•Electrically
conductive silver
epoxy for quick connections and bonding •Perfect for
solderless connections such as circuit board repair,
surface mount connections, static discharge,
shielding and grounding •Applicator included
MCM Part #
21-2225
(1-4)
$79.99 (5-up)
$76.94
Flux
•Flux pen allows an easy and controlled
application of mildly active flux •Chisel
point allows work in tight spaces
•Eliminates mess from flux bottles •Good heat
stability minimizes white residue problems •1⁄3 oz.
MCM Part #
21-2265
(1-4) $4.99 Flux Pen #2331
•Water soluble flux pen is used for PCB’s,
rework, general maintenance and repair
•Pen applicator allows flux to be dispensed in a
controlled manner •Useful with leaded and
lead-free work of conventional and surface
mount assemblies •High activity •.33 oz.
MCM Part #
21-2255
Rosin Flux
Solder Paste
•Permits soldering of even
difficult metals such as brass or nickel
•Can be removed with cloth or solvent
•Non-spill consistency •Non-flammable
•Non-corrosive •2 oz. •Mfr. #RSF-R80-2
MCM Part #
200-385
(1-5)
$8.39
(6-11)
$7.63
(12-up)
$7.02
MCM Part #
20-1100
1200
(1-5)
$11.29
(6-11)
$10.71
(12-23)
$10.05
•The pen for applying lead-free flux with precision
and control •Applies a non-corrosive, halide-free, no
clean flux for high temperature, lead free applications
•Can also be used for tin/lead fluxes •Flux meets
Bellcore TR-N-NWT-000078 and IPC SF-818 for
surface insulation resistance •Flux meets ANSI/IPC
J-STD-004, Type ROLO •Easily removed with
Lead-Free Flux Remover Pen or Flux-Off®
Lead-Free Flux Remover •RoHS compliant
•9 grams (0.32 oz.) •Mfr. #CW8400
MCM Part #
20-4285
(1-11)
$8.69
(12-up)
$8.53
ONLY
$6.99
No Clean Paste Flux
Lead-Free Flux
•10cc syringe with plunger and nozzle
•Same flux used in the SMD removal kit (#21-3450)
•Easy to dispense •Great for soldering/desoldering
The quart-sized container
offers a convenient package
size for small OEMs and
board repair shops. The
Lead-Free Flux applies
a non-corrosive, halide-free
no clean flux. The instant
wetting action of the LeadFree Flux provides thorough deoxidation
of metal surfaces, leaving the best possible surface
for solder to metal bonding. •Meets Bellcore Standard
TR-NWT-000078 and IPC specification SF-818 for
surface insulation resistance (SIR) •Can be used for
soldering with lead-free or tin/lead solders •Excellent
material compatibility •Fast drying •RoHS
compliant •High thermal stability •32 oz.
bottle •12 bottles per case •Mfr. #CW3220
MCM Part #
21-3453
Liquid Solder-Flux
Noncorrosive liquid solder flux
is ideal for electronic and communication
work. Brush onto connection before
soldering to aid solder flow.
2 oz. bottle with brush.
(5-up)
$4.55
Lead-Free
Flux Dispensing Pen
ONLY
$14.99
(2-up)
$13.49
Flux Remover Pen
•For precise removal of flux from printed
circuit boards •Completely removes flux in
seconds •Spot cleans tight tolerance areas on
circuit boards •Marker dispenser provides controlled
and exact application •Dries fast •Available for
No clean and water soluble fluxes •Mfr. CW9100
MCM Part #
20-3205
(1-4)
$11.99
(5-up)
$11.90
www.MCMelectronics.com /1-800-543-4330
MCM Part #
20-4476
(1-11)
$18.99
(12-23)
$18.47
Follow us on:
(24-up)
$17.85
&
Soldering Chemicals - Cleaning
and Chemicals
11
Flux Dispenser
E-Line™ Flux Remover
No Clean Tacky Flux
•Flux is packaged in a convenient syringe
applicator to provide exact
delivery of flux gel to surface
•Formulated for No-clean applications making it ideal
for easy BGA rework •Long tack time, extended shelf
life •No refrigeration required •Noncorrosive, halide
and halogen free •Excellent consistency with stable
viscosity •3.5 gram syringe •Mfr. #CW8500
MCM Part #
20-4900 ONLY
$12.99
Proven effective in lead-free environments,
safe on plastics and rapidly evaporating.
Ecoline flux remover dissolves type R,
RMA, SA, and most no-clean fluxes.
Features: •Cleans flux from lead-free
soldering •Remove no-clean fluxes
•Safe on plastics •Non-corrosive •Rapidly
evaporating •Zero residue •12 cans per case
•Available in a 10 oz. aerosol can •Mfr. #1621-10S
•Self standing, no spill, polyethylene squeeze
bottle dispenses one drop of liquid flux, oil
or solvent through stainless steel hypodermic
needle •Bottle holds 2 oz. of liquid •Three
needle sizes included: .010", .020" and .054"
MCM Part #
22-1075
ONLY
$3.99
Flux and Liquid
Dispensers
A
C
B
MCM Part #
20-2105
D
These new
POS-A-LOC® leak
proof liquid
dispensers offer
a convenient way
to dispense specific
amounts of a
variety of liquids without dripping, spilling, or waste.
SP-30 Acid
Paste Flux
•Designed for applications
where liquid flux may be
hazardous or inconvenient to
use •In paste form this flux is
non-flammable, non-splattering
and thermally stable •Can be
applied to metal surfaces by brushing,
dipping or other methods •Not for use for
electrical or electronics soldering applications
MCM Part #
21-10545
✔Safe on plastics
Flux Dispenser
ONLY
$14.99
Fig. MCM Part # Size A 21-7904
2 oz.
B 21-7906
2 oz.
C 21-7908
2 oz.
D 21-7910
2 oz.
Type Capillary I.D. (ea.)
Dispenser .020"
$3.49
Dispenser .010"
3.29
Dispenser, .010"
8.99
ESD safe
Dispenser, .020"
8.99
ESD safe
(2-up)
$3.47
2.96
8.32
®
MCM Part #
21-11648
ONLY
$34.99
Lead Free No Clean Paste Flux
•5cc syringe with handle and tip •Same flux used
in the lead-free SMD removal kit (#21-8530)
•Used for lead-free rework applications
•Easy to dispense •RoHS compliant
MCM Part #
21-8535
ONLY
$11.99
•A powerful and cost effective flux
remover for cleaning no-clean flux
•Remove corrosive residue with the flux
remover formulated to remove the widest
range of no-clean and synthetic flux
•Flammable •Ozone safe •Dries fast
•Leaves no residue •Test on plastics
•12 oz. can •Mfr. #ES1696.
(1-11)
$12.59
(12-23)
$12.49
(24-up)
$14.10
Val-U Flux Wash
•Clean and remove fluxes, light oils, waxes,
grease, and silicone •Safe on most plastics
•Evaporates quickly •Adjustable flow valve
•Ozone safe •Flammable •10 oz. aerosol
•Mfr. #DFW-V710
MCM Part #
200-350
(1-5)
$6.99
(6-11)
$6.64
(12-up)
$6.31
Flux-Off Water Soluable
MCM Part # (1-5) (6-11) (12-23) (24-up)
20-1165 $17.49 $16.97 $16.80 $16.46
4Removes white residue
MCM Part #
20-4010
(12-23)
$14.39
Proprietary alcohol blend removes all
flux types quickly and efficiently. Removes
most types of organic and inorganic fluxes.
Evaporates quickly and leaves no residue.
Also removes ionic and non-ionic soils.
13.5 oz can. 12 cans per case. Mfr. #ES1530.
Flux-Off No Clean Plus
•A quick drying, mildly activated (RMA type),
no-clean flux in a pen form, ideal for removing and
replacing surface mount components •The pen allows
for pin point application •Designed to aid reflow when
heating to remove components •Can also be used as an
anti-tarnish, protective film on bare copper or tinned
tracks, providing excellent solderability for up to six
months •Ozone friendly •Zero halide content so no
cleaning is required •Passes copper plate and copper
mirror corrosion test •For use with hot air, hot gas or
conventional soldering techniques •Low, non-tacky/
non-corrosive residue •Pack of five 12ml pens
(6-11)
$14.54
8.32
Flux Removers
Surface Mount Rework Flux Pens
(1-5)
$14.99
Trace Technologies
Flux Remover Pen
(24-up)
$12.39
Flux-Off Rosin
®
Trace Technologies complete line of circuit board
repair pens delivers quality and performance for board
repair and rework. Meets each technician’s needs for
all types of circuit board repair including cleaning,
protecting, and restoring electrical connections.
MCM Part #
20-3784
(1-4)
$9.49
(5-up)
$8.54
✔Safe on plastics
Fast drying aerosol quickly
and completely removes R,
RMA, RA and synthetic flux.
Noncorrosive, safe for most
surfaces. No rinsing required.
CFC/HCFC free, no ozone
depleting compounds. Not for
#20-1960
use on energized equipment. Use
on printed circuit boards and SMD pads.
MCM Part #
Description Mfr. #
(1-5) (6-11) (12-23) (24-up)
20-1690
ES1035 $19.99 $19.39 $19.20 $18.82
10 oz. can
20-1960
ES835B 12.79 12.19 11.59 11.09
5 oz. with brush
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
No Clean Flux Remover G3™
The patented formula of No Clean Flux
Remover G3™ was developed to be the
direct replacement for defluxers containing
HCFC-141b. It is specifically designed for
the removal of no-clean flux and white
residue. Features: •Non-ozone depleting
•Non-flammable •Safe on most plastics
•Rapidly evaporating •12 oz. can
•12 cans per case •Mfr. #1634-12S
MCM Part #
20-4095
(1-11)
$24.99
www.MCMelectronics.com /1-800-543-4330
(12-23)
$24.49
(24-up)
$22.53
1201
11
Cleaning and Chemicals - Soldering Chemicals
Conformal Coating
Conductive Pens
Flux Remover G3™
✔Nonflammable
Specifically designed for removing R,
RA, RMA, and SA type flux residues.
This flux remover can be used as an allpurpose cleaner to remove light oils,
silicones, waxes, greases. Features:
•Non-ozone depleting •Non-flammable
•Safe on most plastics •Rapidly
evaporating •Zero residue
•16 oz. can
MCM Part # Mfr. #
Description (1-11) (12-23) (24-up)
20-3940
1631-16S 16 oz. can $29.99
-
20-4090
1631-5S 5 oz. aerosol 17.49 $17.14 $16.63
with brush attachment
•Five grams of silver based solution makes instant
traces on epoxy, glass, plastic, metal •Repair defective
traces/circuit boards/rear-window heater traces; as well
as jumpers/prototype circuits; and shielding electronics
•Use with companion product, CircuitSealer®
Conformal Coating •Mfr. #CW100P
•Protects and insulates components, circuit traces and
repairs •Protects against moisture, abrasion, chemicals
and other environmental conditions •Protects against
arcing and shorting •Improves and protects
circuitboard modifications and traces made by
CircuitWriter® pen •Resistivity: 3 x 10^13ohm @100V
•7 ml. acrylic based liquid solution •Mfr. #CS100P
MCM Part # 200-175
MCM Part #
200-225
ONLY
$18.99
•The economical, non-ozone depleting,
nonflammable flux remover Features:
•Nonflammable •Regular strength
•Ozone safe •Test on plastics •Quickly
removes rosin-based and low residue no
clean flux Applications include: •Removal
of flux during post soldering applications
•Cleaning of PCBs, component leads,
and surface mount devices/pads; screens
and stencils; hand tools; meters and test
equipment •12 oz. can •Mfr. #ES6200
(1-11)
$23.49
(12-23)
$23.02
ONLY
$12.99
Fine-L-Kote SR®
Silicone Conformal Coating
Flux-Off® VZ
MCM Part #
20-4185
CircuitSealer Conformal Coating
®
CircuitWriter® Conductive Ink Pen
Nickel Conductive Pen
(24-up)
$22.33
•Quickly creates conductive nickel
traces, jumpers and shielding •Easy and economical
to use making it ideal for solderless linking of
components, EMI shielding and grounding, and
prototype modification •Valved pen tip for easy
application •Dries in minutes at room temperature
•9 grams •Mfr. #CW2000
MCM Part #
20-4930 Type SR silicone resin conformal coating
has excellent moisture and fungus resistance
properties and is UL recognized. Material
flexibility allows for vibration, movement,
and rapid changes in temperature. Durable
coating offers chemical resistance and is
recommended for harsh environments.
•12 oz. aerosol can, •Mfr. #2102-12S.
MCM Part #
(24-up)
20-2240
(1-5) (6-11) (12-23) $32.99 $31.68 $30.72 $29.95
ONLY
$11.19
Fine-L-Kote UR®
Urethane Conformal Coating
Flux Off Heavy-Duty
•The heavy-duty flux remover for
removing encrusted no-clean and rosin
flux •Nonflammable •Ozone safe •Dries
fast •Leaves no residue •Safe on some
plastics-test first •12 oz. can
•Mfr. #ES1631
MCM Part #
20-4600
Conductive Pen
•Use where conductive electronic
traces are needed •Perfect for designing prototype
circuits •Solderable at low temperatures •Makes
instant silver conductive traces on most surfaces
•Dries in minutes •Six month shelf life
ONLY
$44.99
MCM Part #
21-1555
(1-4) $41.99
(5-up)
$39.89
•Alcohol based defluxer for type R, RA,
RMA, and SA fluxes •Can be used as an
all-purpose cleaner to remove, light oils,
silicones, waxes, greases and similar
contaminants •Safe on plastics •Nonozone depleting •Zero residue •Noncorrosive • 16 oz. bottlewith trigger
•Mfr. #1679-PT
1202
(1-5)
$21.49
MCM Part #
(24-up)
20-2242
(1-5) (6-11) (12-23) $29.99 $29.70 $28.77 $28.03
12 oz. Turbo-Coat Acrylic
Conformal Coating
Envi-Ro-Tech™ Defluxer
MCM Part #
20-4865
Fine-L-Kote UR® is highly resistant to most
solvents, moisture, fungus, and molds. A
clear, repairable coating, Fine-L-Kote UR®
is formulated with a black light indicator,
Opti/Scan, to provide checks for conformity
in quality control. Coated boards can be
reworked by applying soldering iron directly
to coating. Applications include PC boards,
thick film circuits and electrical components.
•12 oz. aerosol can, •Mfr. #2104-12S.
(6-11)
$19.77
(12-23)
$18.46
•For your most intricate work •Makes instant silver
conductive traces on most surfaces •Draw traces on
circuit boards, repair defective traces, make smooth
jumpers and shield delicate electronics •Dries in
minutes •Valved pen tip for easy application
•Six month shelf life
•Fast and easy, rework and repair with
this speedy conformal coating •Dry to the
touch in about three minutes, fully cured
in about ten minutes •Thick coating for
one pass application •Clear and glossy
finish •UV indicator •Toluene and xylene
free •IPC-CC-830 and MIL-I-46058C
tested •UL94 V-0 rated
MCM Part #
21-2185
MCM Part #
20-4582
Micro Tip Conductive Pen
(24-up)
$17.37
(1-4) $44.99 (5-up)
$44.39
www.MCMelectronics.com /1-800-543-4330
(1-11)
$23.99
(12-23)
$21.83
Follow us on:
(24-up)
$21.18
&
Soldering Chemicals - Cleaning
and Chemicals
11
SMD Rework
Epoxy
Overcoat
SMD Removal Kit
•Epoxy system provides a tough,
thermally stable, protective coating making it ideal for
pre-reflow solder resist repair •Electrically insulative
coating helps prevent electrical discharge •Provides
thermal and chemical resistance and protection
against moisture and abrasion •Will not be removed
by solvent cleaners •Service temperature from -55°F/
to 600°F Includes: •4 gram adhesive syringe
•3.4 gram hardener syringe •Mfr. #CW2500
MCM Part #
20-4935
ONLY
$12.99
Overcoat Pen
•Protects conductive pen (#21-1555)
traces •Repairs permanent solder mask •Insulates
against shorting and arcing •Protects against abrasion
and moisture •Helps prevent static discharge problems
on sensitive circuits •Matches the color of solder
mask for nearly invisible repairs •Available
in green or clear •0.16 oz. •Mfr. #CW3300G (Green)
MCM Part #
21-1580
(1-4)
$19.99
(5-up)
$17.91
Solder Mask
Chemask® W – Water Soluble
•A water soluble temporary solder
masking agent which rinses off with
water cleaning systems •Can also
be used as a water soluble tacking
compound •Non-corrosive; safe
for sensitive gold, silver and
copper •8 oz. bottle • Mfr. #CW8
MCM Part #
20-5145
Safely removes SMDs
using low heat. Fast
and easy to use. Heat
can be applied with a
soldering iron, warm
air preheater, or heat gun. The SMD is easily
removed with tweezers or a pick-up tool. Kit includes:
Low temperature desoldering alloy (136°F), syringe
with no clean flux, and six alcohol pads.
Product contents will remove 8-10 SMDs.
MCM Part #
21-3450
ONLY
$13.99
No Lead SMD
Removal Kit
•Safely removes
SMDs using
low heat •Heat
can be applied
with a soldering iron,
warm air preheater, or heat gun •The SMD is easily
removed with tweezers or a pick-up tool •Works
equally well on lead and lead-free PCBs •RoHS
compliant Kit includes: Lead-free removal alloy,
syringe with no clean flux, and six alcohol pads.
Product contents will remove 8~10 SMDs
MCM Part #
21-8530
ONLY
$15.99
Removal Alloy
Replacement alloy for removing SMDs. The same
alloy included with the Chip Quik Removal Kit.
MCM Part #
21-3451 21-3452 ONLY
$14.49
Description
16' alloy in 6.5" lengths
32' alloy in 6.5" lengths
ONLY
$109.00
169.00
SMD 2000 Solder/Desolder Rework Kit
Kit includes: •Chip Quik® Removal alloy (4.5' length)
•Solder paste (no clean 63/37, 1cc syringe) •Solder 3',
63/37, 2% silver, .031" •Chip Quik® no clean flux in
10cc syringe for solder/desolder •Liquid flux remover/
cleaner (5cc container w/applicator) •Probe kit (four
stainless steel dental picks for SMD removal and
placement) •No clean solder wick (5') •Handi-Vac
(SMD pick and place tool w/tips) •Two acid brushes
•Precision tweezers for SMD removal and placement
•Six low lint 4" x 4" cleaning wipes •Ten double ended
cotton swabs •Six alcohol pads •Durable plastic case
MCM Part #
21-3454
(kit)
$139.00
#21-9335
Rework
Solder Paste
#21-9336
•This no mess syringe
works with any lighter
or torch •Works great for
electronics, wiring, connectors, and
circuit boards •Easily removes alloys •Will
not damage sensitive components •Low melting
temperature •No clean solder: 63/67 tin/lead alloy
MCM Part #
21-9335
21-9336
Mfr. #
SMD291AX
SMD291AX10
Size
5CC
10CC
ONLY
$14.99
19.99
#21-9340
Lead-Free Rework
Solder Paste
No Lead Removal Alloy
(2 kits-up)
$132.05
#21-9341
Due to the increasing global demand to eliminate all
lead from the industry, Chip Quik® no lead removal
alloy is now available. This revolutionary product has
been successfully tested for rework on PC boards
manufactured with lead and no-lead solders. The no
lead removal alloy meets the challenge of lead-free
alloys now used on circuit boards.
•This no mess syringe works with any lighter
or torch •Works great for electronics, wiring,
connectors, and circuit boards •Works great
with lead free alloys •Displays great tackiness
and wetting of most soldering surfaces •Will
not damage sensitive components •Low melting
temperature •Lead-free SN96.5/3AG/.5CU alloy
MCM Part #
21-7505
21-7506
MCM Part #
21-9340
21-9341
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
Description
16' alloy in 6.5" lengths-No lead
32' alloy in 6.5" lengths-No lead
ONLY
$99.99
149.00
Mfr#
SMD291SNL
SMD291SNL10
www.MCMelectronics.com /1-800-543-4330
Size
5CC
10CC
ONLY
$15.99
24.99
1203
11
Cleaning and Chemicals - Soldering Chemicals
Soldering Paste
Tip Tinner
Chemical Dispensers
Tip Cleaner/Tinner
•Keeps tips clean and
longer lasting •Protects
tips from oxidizing •Lead free •0.5 oz. •Mfr. #TPC-14
Soldering Paste
MCM Part #
200-390
Designed for plumbing applications,
sheet metal, chassis, buss bars,
copper tubing, etc. Not intended
for PC boards. Excellent for use
as a tip cleaner. Net wt. 65 grams.
MCM Part #
20-890
(1-5) $6.99 (6-11) $6.92 (12-23) $6.72 (1-5)
$8.39
(6-11)
$7.97
(24-up)
$6.45
(12-up)
$7.57
Tip Tinner and Activator
NEW!
•Regular use of Weller® tip tinner
and activator regenerates oxidized
tips prolonging the life span of your
soldering tips •Works well in low
temperatures •Environmentally
safe, no halides, lead, rosin
or residues •Size: 0.5 oz.
Solder Paste
Specifications: •Melting Temperature: 100°F~140°F
(38°C~ 60°C) •Flash Point: 401°F (205°C)
•Makeup: 80% Petroleum Jelly / 20% ZnCl2
MCM Part #
21-11634
21-11636
Weight
10 grams
30 grams
ONLY
$0.99
1.49
MCM Part #
96-2510 MCM Part #
21-8720
Solder Paste
10CC Syringe
•This no-mess
syringe works with
any lighter or torch
•Works great with
CHIP QUIK®
Soldering paste
ONLY
$5.99
#21-9345
#21-9346
MCM Part #
Mfr#
Description
ONLY
21-9345 SMD4300SNL10
Lead Free
$24.99
SN96.5/3AG/.5CU
21-9346 SMD4300AX10 63/37 water washable 23.49
1204
ONLY
$299.00
ONLY
$9.49
Plastic Pump Alcohol Dispenser
•Durable, high density polyethylene
•Convenient, rectangular bottom for
stability •Reduces spillage, fumes,
and waste •Ideal for field repairs
•8 oz. pump bottle
Tip Tinner/Cleaner
MCM Part #
21-10675
•The no mess, no waste syringe works with the
heat of a torch or lighter •Flux is blended in and no
additional flux is required •Silver bearing works great
for electronics, wiring, connectors, and circuit boards
•Repairs copper, brass, bronze, nickel, platinum,
chrome, monel, and steel •Low melting point-flows
smoothly at 430°F, re-melts at 650°F •Tensile
strength up to 28,000psi •Five times stronger
than conventional solders •7.1 gram syringe
•Customizable dispenser can be used to inject liquids
or paste, such as solder, colored gels, epoxy and more
•Time, pressure and quantity of injection can be
controlled by timer to ensure consistent quantity is
dispensed •Manual or pedal controlled for various
settings •Mfr. #QUICK982B
MCM Part #
21-13295 •This tip tinner and cleaner
helps prevents oxidation and
re-tins tips •Cleans tips so they
last longer •0.5oz. can
Silver Bearing Solder Paste
NEW!
Dispensing Controller
MCM Part #
21-8064
(1-4)
$6.99
(5-up)
$6.29
ONLY
$5.99
Chemical Dispensers
Lead Free Solder Tip Cleaner
•The finest tip cleaner available
•Helps restore solder tips by removing
old flux and solder •.5 oz. can with two-sided tape
allows placement on or near soldering station
MCM Part #
21-1075
(1-9)
$7.99
(10-up)
$7.19
•Dispenses only as much
fluid as needed for the job
•Eliminates loss through
evaporation and spills •Onehanded touch on the dish
dispenses only the required
amount of fluid •Airtight check valve prevents
contaminated liquid from dripping back into bottle
•High density polyethylene bottles with metal pump
action cap •Available in 4 oz., 6 oz. or 8 oz. dispensers
MCM Part #
21-2525
21-2530
21-2535
Size 4 oz. 6 oz. 8 oz. Tip-Tin
Tinner/Cleaner
This lead free tip tinner is a fast, efficient, and
safe means of re-tinning tips. This thermally-stable
compound is residue-free, ESD and environmentally
safe. Provides improved cleaning and re-tinning of
highly oxidized soldering iron tips safely and
efficiently. 20g tin. Mfr. TT-95.
MCM Part #
21-7926
(1-9)
$8.49
(10-up)
$7.64
www.MCMelectronics.com /1-800-543-4330
(1-4) $16.49 16.99 17.99 (5-up)
$14.84
15.29
16.19
TechPump Bottle
For use with all Tech Spray cleaners,
degreasers, and defluxers. Designed for
precision control and dispensing of solvents
in electronic and laboratory environments.
6 oz. pump bottle. Mfr. #1981.
MCM Part #
20-3060
(1-5)
$25.49
(6-11)
$24.10
(12-23)
$23.23
Follow us on:
(24-up)
$22.75
&
Chemical Accessories - Cleaning
1.5 Liter Pressure Sprayer
•General purpose pressure sprayer for
various applications around the shop,
house or garage •Adjustable nozzle
•Integrated pressure release valve
MCM Part #
21-11714
Flux and Liquid
Dispensers
Wash Bottle with Pointed Tip
•Handy for holding various liquids,
including chemicals, cleaners and other
solvents •Made of durable plastic with
a secure cap for safe storage and travel
•Clear for easy identification •Pointed
tip for controlled dispensing •100cc
capacity •Dimensions: 6.1" x 1.75"
ONLY
$3.99
MCM Part #
21-11797
ONLY
$1.49
MCM Part #
21-11712
MCM Part #
21-11800
ONLY
$0.99
ONLY
$13.49
(1-3)
$5.99
(4-up)
$5.69
Precision Oiler
ONLY
$6.99
Single Use Syringe
MCM Part #
21-11795
Flux Dispenser
ONLY
$0.99
•Self standing, no spill, polyethylene squeeze
bottle dispenses one drop of liquid flux, oil or
solvent through stainless steel hypodermic
needle •Bottle holds 2 oz. of liquid •Three
needle sizes included: .010", .020" and .054"
MCM Part #
22-1075
MCM Part #
21-11796
ONLY
21-11696
$6.49
Aerosol Can Caddy
•This rugged, all-steel aerosol can caddy offers
convenient storage for up to six aerosol cans •Easily
wall mounted using key holes provided •Acid/rust
resistant gray baked enamel •Heavy-duty •Ideal for
every service shop •Dimensions: 211⁄2" (W) x 53⁄8" (D)
•Six sections •3 lbs. •Made in USA
MCM Part #
21-2060
ONLY
$3.99
•Precision actuator with stainless steel extension
tube fits Caig 2 oz. spray can products •Works with
DeoxIT® D100S contact cleaner (MCM #200-150)
and DeoxIT® F100S contact lubricant (MCM
#200-208) •Length: 73mm •Mfr. #ACT-SS-2OZ
MCM Part #
200-500 MCM Part #
21-9515
Stainless Steel Actuator
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$16.49
Single Drum Modular
Spill Platform
NEW!
ONLY
$1.99
MCM Part #
•Add affordable spill protection
to your workplace with modular
spill platforms •Made of high
performance plastic for
chemical resistance and
durability •Removable grating
for easy cleaning •12g sump
capacity •2,000 lb. load
capacity •Dimensions: 26¼"
(w) x 26" (d) x 6½" (h)
Angled Dispenser Bottle
•Dispenser bottle features a long angled
tip to direct liquid with precision and access
hard to reach areas •Holds various liquids,
including chemicals, cleaners and other
solvents •Made of durable plastic with a
secure stop to prevent spills •Clear for easy
identification •Angled tip for controlled
dispensing •8 oz. capacity
•Powerful, heavy-duty, powder
coated steel magnetic holder
mount onto tool boxes,
storage lockers, cabinets
or most metal surfaces
to extend storage •Perfect
for storing various cans
•Dimensions (H x W x D): 4.3" x 8.3" x 3"
•Duratool’s Precision Oiler is for the exact placement
of oil or any other lubricant •This product’s smooth
actuator allows for greater control and placement of
lubricant •Length: 5 5⁄8" •Pocket clip for convenience
•All aluminum construction •Protective screw-on cap
prevents all leakage •Oil not included •Mfr. #D00450
MCM Part #
22-11104
•Single use syringe can be used for precision
application of adhesives, flux, solder, grease
and other chemicals •Includes cap for when
not in use •2.5mL capacity
Type Capillary I.D. ONLY
Dispenser .020"
$3.49
Dispenser .010"
3.29
Dispenser, .010"
8.99
ESD safe
Dispenser, .020"
8.99
ESD safe
Magnetic Can Holder
Brush Scrub Bottle
MCM Part #
20-5235
D
ONLY
$12.99
•Ideal for injecting contact cleaners or light oils
into shafts, controls and many other tight places
•Provides a safe, inexpensive
method to spot clean PCB
assemblies, remove flux and
for general cleaning •Uses natural horse or hog hair for
soft to stiff bristle stiffness •Compatible with IPA,
Hexane and Acetone •2 oz. bottle size
C
Chemical Storage
Chemical Injector
MCM Part #
21-2310
B
Fig. MCM Part # Size A
21-7904
2 oz.
B
21-7906
2 oz.
C
21-7908
2 oz.
D
21-7910
2 oz.
•Designed for use in environments where
ESD sensitivity is a must •Features a
stainless steel one-touch pump to dispense
only the amount of liquid needed •Lid
closes to prevent spills and contamination
•Capacity: 6 oz.
•750ml sprayer is ideal for use
at home, in the garden or office
•Plastic body •Adjustable nozzle
A
These new
POS-A-LOC® leak
proof liquid
dispensers offer
a convenient way
to dispense specific
amounts of a
variety of liquids without dripping, spilling, or waste.
ESD Safe Chemical Dispenser
750ml Sprayer
11
and Chemicals
ONLY
$1.99
www.MCMelectronics.com /1-800-543-4330
ONLY
$114.33
1205
11
Cleaning and Chemicals - Chemical Accessories
Flextips™ Optics Swabs
•Flexible head swabs are ideal for cleaning optics as
well as small confined areas •Provides gentle cleaning
of sensitive areas •Superior durability •Non-abrasive
•Made without adhesives or glue •Nylon/
Polypropylene handle •50 per pack
#21-9480
Flammable Safety Storage Cabinets
#21-9500
•Use these cabinets to safely store your flammable liquids and supplies
•Different sized cabinets with adjustable shelves to meet your needs
•Reinforced double wall construction with 11⁄2" air space on all sides
•2" vent with fire baffle and cap •Four adjustable galvanized leveling
legs •2" raised leak proof sill •Three point key lock with button latches
•Tri-lingual warning labels •Holds up to 350 lbs. •Meets NFPA
Code 30 and OSHA specifications
MCM Part #
21-9480
21-9481
21-9485
21-9486
21-9490
21-9491
21-9495
21-9496
21-9500
21-9501
21-9505
21-9506
21-9510
21-9511
Cabinet
Description
2g bench top 2g bench top 4g bench top 4g bench top 12g space saver
12g space saver
22g under counter
22g under counter
24g wall mount 24g wall mount 30g standard 30g standard 45g standard 45g standard Self Closing Doors
# of Shelves
Yes
1
No
1
Yes
1
No
1
Yes
1
No
1
Yes
1
No
1
Yes
3
No
3
Yes
1
No
1
Yes
2
No
2
Chemical Safety
MCM Part # Mfr. # Description
Length ONLY
4.45" $33.99
20-5160
CX50 Flextips™ swabs
20-5165
CXM50 Flextips™ mini swabs 4.13" 34.99
#21-9510
Outside Dimensions
(W) x (D) x (H)
171⁄2" x 18" x 171⁄4"
171⁄2" x 18" x 171⁄4"
171⁄2" x 18" x 221⁄2"
171⁄2" x 18" x 221⁄2"
23" x 18" x 35"
23" x 18" x 35"
35" x 22" x 35"
35" x 22" x 35"
43" x 12" x 44"
43" x 12" x 44"
43" x 18" x 44"
43" x 18" x 44"
43" x 18" x 65"
43" x 18" x 65"
ONLY
$699.99
623.15
685.98
581.95
790.01
727.18
1164.93
967.17
1195.83
1039.27
1143.30
987.77
1351.36
1247.33
Swabs
SuperFlextips™ Swabs
•These swabs have a super flexible head making them
great for gentle cleaning of sensitive surfaces •Extra
durability •Non-abrasive •Made without adhesives or
glue •Nylon/Polypropylene handle •50 per pack
MCM Part #Mfr. #
Description
Length ONLY
20-5170
SX50 SuperFlextips™ swabs 4.45" $34.49
20-5175 SXM50SuperFlextips™ mini swabs 4.13" 39.99
Microtips™ Applicators
•Precision applicator for pinpoint solvent, adhesive
and lubricant application •Compatible with most
solvents which make them suitable for most
applications •Low extractables and particulate
levels •Effective as a stylus or pick •Porous
polyvinylidene fluoride tipped •Polypropylene
handle •Length: 6.7" •50 per bag •Mfr. #CM502
MCM Part #
20-5180
NEW!
Chemical Sorbent Pads
•High capacity pads have a
low profile design allowing
them to be placed in tight
areas •Ideal for cleaning up
spills or wiping down contaminated
areas •Scrim on one side adds strength and
eliminates linting •Size: 91⁄4" x 141⁄2" •25 per box
MCM Part #
108-5240 Precision Foam Swabs
ONLY
$15.99
•Precision foam swabs are useful in a variety
of applications in the electronics industry •Ideal
to clean or treat hard to reach areas such as circuit
boards, connectors or keyboards •1⁄4" x ¾" x 4½"
MCM Part #
200-420
200-422
Mfr. #
SWP-25
SWP-100
Qty.
25
100
ONLY
$11.99
39.99
NEW!
•Contains everything you
need to safely handle
and dispose of lab spills
Includes: •(6) 500mL
pillows •(2) 12" x 14"
Kimtex® towels •SilverShield® gloves (Size L) •Nitrile
gloves (Size 10) •Goggles •Package Contents Tags •4"
red vinyl twist tie •17" x 30" disposal bag •Spill kit box
•Warning label •Spill response guide
•Safety and compliance director
1206
Cottontips™ Precision Swabs
•Double headed swabs are made of cotton fibers
tightly wrapped around a wooden handle •Designed
for cleaning applications where absorbency is critical
•Extremely low linting for precision applications
•Good solvent compatibility •Soft round tip point
•Non-static generating •Length: 3.07” •25 per bag
•Mfr. #CCT2025W
MCM Part #
20-5185
Lab Safety
Chemical Spill Kit
MCM Part #
21-12445
ONLY
$36.49
ONLY
$61.99
ONLY
$1.59
Chemswabs
•Plastic swabs with
foam tips •Presoaked
in alcohol •Swabs are
individually packaged
for convenience
•25 per box
MCM Part #
20-1155
(1-5 boxes)
$38.99
(6 boxes-up)
$37.09
www.MCMelectronics.com /1-800-543-4330
Mini Foam Swabs
•Made of lint free cellular
urethane foam for maximum absorbency •Compatible
with freon based solvents, alcohols and most other
cleaning fluids •23⁄4" length •50 per package
MCM Part #
20-950
(1-5 pkgs.) (6-11 pkgs.) (12-23 pkgs.)
$22.99 $21.69 $20.72
Follow us on:
&
Swabs, Wipes and Brushes - Cleaning
and Chemicals
A
11
Wipes
B
C
Foam TechSwabs™
Foamtips™ Swabs
•Highly absorbent precision cleaning swabs made
with the purest medical grade foam •100 ppi
polyurethane open cell foam head •Available in a
variety of head sizes and shapes for a variety of uses
•Pro swab (MCM #20-956) has a blue scrubber side
and a soft absorbent side •Polypropylene handle
(except #20-954 which is wood) •50 swabs per bag
MCM Part # Mfr. # Length Description
ONLY
20-956
CFP50 6.75" Pro double ended swabs$41.49
20-954
CF50 6.10" #100 foam over 21.99
cotton swabs
20-953
CF1050 5" #110 circular swabs
24.99
20-952
CF20505.12" #120 rectangular swabs 27.99
20-951
CF3050 6" #130 elongated swabs 24.99
Fig. MCM Part # Description
(1-5) (6-11)(12-up)
A 20-2736
Absorb-tip, 50 pack $18.99 - $18.52
B 20-2741
Narrow tip, 50 pack 19.99
- 19.02
C 20-2751
Super tip, 50 pack 19.99 19.02 18.08
•Fine cotton tip pointer swabs with wood handle
•Tightly woven absorbent cotton for lint-free cleaning
performance •Perfect for cleaning headphone jacks,
fiber optic connections, serial connections, modular
jacks, and any other small areas that normal swabs
cannot access •Size: 3" handle length, .5mm~2.3mm
head •Mfr. #SWPP-100
(1-3 pkgs.)
$21.99
(4 pkgs.-up)
$21.37
A
B
TechClean® Absorbwipe
•100% polyester •100 wipes
•Absorbwipe has an absorption
rate of six times its own weight
•This soft, hydroentangled 100% polyester wipe is
perfect for cleaning optical equipment and other
sensitive equipment •Available in two
different sizes •Size: 4" x 4"
MCM Part #
20-2260
(1-5 pkgs.)
$7.99
50-Pack Double-Sided Cotton Cleaning Swabs
•Great for tape machine maintenance •6"
wooden stick for getting into tight spaces
Fig. MCM Part #Description
(1-5) (6-11)(12-up)
A 20-2710 Double tip, 100 pack $4.79 $4.71 $4.49
A 20-2711 Double tip, 1000 pack 36.99 35.59 34.04
B 20-2715 Single tip, 100 pack 3.99 3.89 3.75
B 20-2716 Single tip, 1000 pack 24.99 24.39 23.02
(12 pkgs.-up)
$7.05
(1-9)
$1.99
(10-24)
$1.95
(25-up)
$1.91
✔9" x 9"
✔300 wipes
•Blue general-use wipes for cleaning and absorption
with most liquids •Low linting •Mfr. #2365-300
MCM Part #
20-4510
(1-11 pkgs.) (12-23 pkgs.) (24 pkgs.-up)
$28.69
$28.49
$27.07
Cottontips™ Micropoint Swabs
•Low linting cotton swabs have excellent absorbency,
as well as high strength •Consist of cotton fibers which
are tightly wrapped around a handle •Handle is made
from clean room grade composite material •Small
size for delicate applications •Good solvent capacity
•Sharp point •Non-static generating •25 per bag
•Mfr. #CCT2425
MCM Part #
20-4940 ONLY
$1.69
#20-4650
#20-4655
Recycled
Delicate Task Wipes
Cotton TechSwabs™
Precisely designed, manufactured and packaged to
serve the various cleaning and maintenance needs
in the electronics industry. •Tightly wrapped, precleaned cotton tip insures least amount of extractable
contaminants •Wooden tip (single tip swab)
allows for aggressive cleaning
(6-11 pkgs.)
$7.27
Economy Wipes
MCM Part #
21-1100
100-Pack
Cotton Pointer Swabs
MCM Part #
200-284
Precisely designed, manufactured and packaged
to serve the various cleaning and maintenance needs
in the electronics industry. A variety of swab tips
are available to suit many different applications. •100
pores per inch reticulated polyurethane foam ensures
excellent absorbency while minimizing contamination
•Heat sealed tip prevents tip loss even while saturated
with solvent •Flexible tips provide versatility, while
rigid heads allow for more aggressive cleaning
Chamois Tips
•Super-soft tips are free
of all contaminating
agents •Compatible
with TF solvent and
isopropyl alcohol •Flexible polystyrene handle •31⁄2"
length •Display packaged •50 pieces per package
MCM Part #
20-1145
(1-5 pkgs.)
$29.99
(6-11 pkgs.)
$29.62
(12-23 pkgs.)
$29.06
Ideal for light cleaning tasks in the laboratory, repair
and maintenance facilities, and more. Quickly and
easily wipes up liquid and dust. Packaged in a portable
dispenser that reduces lint and cross contamination.
Features: •Low linting •100% recycled wipe and
box •Biodegradable and sustainable
MCM Part #
20-4650
20-4655
Mfr. #
2342-300
2342-140
Qty.
300
140
Dimensions
4.4" x 8.3" 15" x 16.6"
ONLY
$3.99
9.99
TechClean Blue Wipes
•Cellulose/polyester •9" x 9"
•300 wipes •Specifically
designed for general
maintenance, this blue
hydroentangled cellulose/polyester wipe has high
absorbency with extra low particulate and chemical
extractables •Designed for cleanroom maintenance
and static free environments •Extra absorbent, low
contamination, non-raveling lint and particle free
•Non-abrasive, excellent strength wet or dry
•Mfr. #2359-300
Double Headed Cotton Swabs
•Tightly wrapped cotton swab for critical
applications •Cotton tips are made from the purest
pharmaceutical-grade, bleached white cotton for
extra softness and absorbency •6" wooden handle
provides extra rigidity •1000 per package
•Economical high-quality
cotton swabs •Extremely soft and
absorbent pharmaceutical grade
heads •6" wooden stick allows
for easy cleaning of electronic
equipment, mechanical or
electrical assemblies, optical
surfaces and much more
•Package contains 100 swabs
MCM Part # 21-1905
MCM Part #
21-2220
Low Lint Cotton Tips
(1-5 pkgs.) (6-11 pkgs.) (12-23 pkgs.)
$34.99 $33.24 $31.58
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$4.79
MCM Part #
20-2560
(1-11)
$44.99
www.MCMelectronics.com /1-800-543-4330
(12-23)
$40.94
(24-up)
$37.66
1207
11
Cleaning and Chemicals - Swabs, Wipes and Brushes
Techclean Wipes
Coventry™ Econowipes™
Dry Wipes
✔Cellulose/polyester
✔9" x 9"
✔100 wipes
This hydroentangled
cellulose/polyester wipe has high absorbency with
extra low particulate and chemical extractables.
Features: •Extra absorbent •Captures liquids •Low
particulate generation •Low contamination •Ultra
low chemical extractables •Static-free applications
•Absorbency capacity: 500% •Average
thickness: 14 mils •Mfr. #2350-100
MCM Part #
20-2570
(1-11)
$23.79
(12-23)
$22.75
(24-up)
$21.72
Rayon Non-Woven Wipes
•Made from 100% rayon, these wipes provide excellent
strength, absorbency and chemical compatibility •Ideal
for general clean room and equipment maintenance or
critical applications where lint can be detrimental
•Extremely absorbent, soft and heat resistant
•9.8" x 9.8" wipes •100 per bag •Mfr. #M325
MCM Part #
20-5210
MCM Part #
20-2275
(1-5 pkgs.) $28.49 (6-11 pkgs.) (12 pkgs.-up)
$26.53 $25.00
Opticwipes
™
Soft laboratory-grade cellulose
paper wipes are packaged in a
Class 100 cleanroom environment
and are designed for use on optical
and other sensitive surfaces. 100% cellulose wipes
are highly absorbent, have high wet strength, are
noncontaminating and solvent resistant. Use
to clean optical surfaces, photo processing, lab
equipment and other precision instrumentation.
Package contains 500, 9" x 9" wipes. •Mfr. #C920
(1-5) $44.49 (6-11) $43.16 (12-23) $42.73 (6-11)
$22.74
(12-23)
$22.06
(24-up)
$21.84
•Highly absorbent, cotton wipes used for abrasion
free cleaning and drying of sensitive surfaces,
components and equipment •Made of strong textured,
100% cotton •Minimal linting •Resistant to caustic
solvents •Size: 9" x 9" •100 per pack •Mfr. #C900
MCM Part #
20-2646
1208
ONLY
$79.99
MCM Part #
20-4596
ONLY
$42.99
•Versatile wipes can be used dry
or saturated with cleaning solvents
for fusion splice clean-up, general
clean-up and other applications
•Compact tub size makes them
ideal for tool or cleaning kits, work
benches and other tight work spaces
•Non-scratching, non-linting, soft and absorbent
•Aperture pockets to collect particles •Clean
perforations for clean, easy tearing •3" x 3" wipes
•100 wipes per mini-tub •Mfr. #FSP100DRY
MCM Part #
20-5155
ONLY
$5.99
This solvent resistant, highly
absorbant wipe is perfect for
cleaning semi-critical work surfaces. •Nonwoven,
spublaced polyester cellulose fabric •Will not tear
or shread, unravel or lint •Resistant to most
solvents, alcohols, and dilute acids
•150 pack of 9" x 9" wipes •Mfr. #C910
•General purpose, highly
absorbent paper roll for light
economic wiping •Can be
dispensed from the outside
or from the centre once the
cardboard core has been
Removed •300m roll made up
of 750 x 21gsm •Full roll size:
63⁄4" x 61⁄3" •Supplied in individual rolls
MCM Part #
20-2647
MCM Part #
21-11730
Controlwipes
™
•Made of hydro-entangled, 45/55 polyester/cellulose
blend for optimum purity •Useful for a wide range
of cleaning applications •Available in three
convenient sizes to meet your different needs
Size
Qty 4" x 4" 1200 wipes
4" x 4"
100 wipes
9" x 9"
300 wipes
12" x 13" 50 wipes
•Complete fiber optic
cleaning system •No refills to
buy or investment in expensive
mechanisms to maintain •Effective
wet or dry connector cleaning •Cleaning
platen is perfect for outside plant or OEM
application •Convenient •Heavy-duty lint-free
wiping material •Won’t shred or tear
Blue Industrial Shop Wipes
Coventry™
Non-Woven Econowipes™
Mfr. #
6704
6704F
6709
6713
(24-up)
$31.84
FSW™ Fusion Splice Wipes
Twillwipes™ Cotton Wipes
MCM Part #
20-5190
20-5195
20-5200
20-5205
(12-23)
$32.82
(24-up)
$41.88
•Hydroentangled wipe has high absorbency, six times
its weight with extra low particulate and chemical
extractables •Class 100 qualified •Lint Free
•Biodegradable and sustainable •9" x 9"
•100 per pack •Mfr. #2340-100
MCM Part # (1-5)
20-4870
$24.99
(1-11)
$33.49
QbE® Fiber Optic
Cleaning System
MCM Part #
20-2645
Cotton
Cleanroom
Wipes
MCM Part #
20-3625
ONLY
$14.99
TechClean® Twillwipe
•100% cotton •6" x 6" •100
wipes •Twill weave designed
for wiping abrasive surfaces
to dislodge soils •The Twillwipe, being woven from
cotton, enables it to be used in static sensitive areas
•Wipe is cut on the bias (45° angle) to prevent
raveling •Mfr. #2357-100.
•The economical absorbent
wipe for cleaning in all fiber
optic applications •Nonwoven
polyester/cellulose blend •Lowest
contamination levels available •Quickly absorbs excess
solvent, contaminants, and buffer gels •Ideal for
cleaning, drying, and polishing connectors •Package
contains 1200, 4" x 4" wipes •Mfr. #6704
ONLY
$33.49
3.49
33.49
9.99
ONLY
$22.49
www.MCMelectronics.com /1-800-543-4330
ONLY
$6.49
Follow us on:
&
Swabs, Wipes and Brushes - Cleaning
and Chemicals
11
Lint Free Wipes
These strong, highly absorbent lint
free cloths are for use on any
surface. Ideal to use for cleaning
computer screens and computer
screen filters. Features: •75 wipes
per bag •6" x 6" •Mfr. #8044
Scotch-Brite™ Electronics
Microfiber Cleaning Cloth
•Safely cleans dust and smudges from electronic
equipment without harmful chemicals •Can use with
or without chemicals •Absorbent •For computers,
monitors, TV screens, VCRs, CD and DVD players
•Machine-washable •Dimensions: 12" x 14"
•Cloth color may vary
MCM Part #
108-3990
108-3985
Mfr. #
9027
9027
Description
Single cloth
Five pack
ONLY
$3.59
13.99
MCM Part #(1-5 bags)(6-11 bags)(12-23 bags)(24 bags-up)
20-2940
$7.99 $7.75 $7.67 $7.52
Premium Terry
Cloth Microfiber
Cleaning Cloths
•High grade cleaning cloths provide a safe and
effective way to clean sensitive electronic equipment
and other sensitive surfaces •Can be used dry or
with screen cleaners to remove dirt, dust and other
contaminants without scratching surface •Reusable
260g wipes can be washed and used over
and over again •Dimensions: 12" x 12"
MCM Part #
21-11785
21-11787 Qty per pack
25
5
ONLY
$19.99
4.99
Microfiber
Cleaning Cloth
•Soft, square cloth for cleaning electronic equipment,
LCD screens, digital cameras, optics, CD/DVD/Blu
Ray disks, instrument displays, and more •Portable
•Use with or without chemicals or water •80%
polyester, 20% polyamide for silky texture
•6" x 6" •Mfr. #CCS-902
MCM Part #
200-405
(1-3)
$1.59
Six Pack Antimicrobial Microfibers
ONLY
$4.99
(1-5)
$59.99
(6-11)
$54.59
(12-23)
$52.95
(24-up)
$52.42
5-Pack Premium
Microfiber
Cleaning Cloths
Yellow Cotton
Duster Cloths
MCM Part #
21-11085
•Microfiber wipe cleans and polishes glass or plastic
•Used for removing fingerprints and light oils without
use of solvent cleaners •Low linting •Washable (avoid
fabric softener) •8" x 8" •50 per pack •Mfr. #2363-50
MCM Part #
20-4875
(4-up)
$1.51
•Duster cloths are
useful for polishing
inside and outside your
car •Dimensions: 191⁄2" x
191⁄2" •Made of 100%
cotton •Sold in packs of ten
Microfiber Cleaning Wipes
•Designed to clean the most sensitive electronics
and components, yet durable enough for the toughest
cleaning jobs •Antimicrobial treated to protect against
odor causing bacteria •Machine washable •Will not
scratch or leave lint •Size: 12" x 12" •Pack of six
MCM Part #
20-5085
ONLY
$5.99
•The safest way to
clean dust, grime,
and marks on
electronic
equipment without harsh
chemicals •Tight knitted interwoven
design lifts and traps contaminants
•Can be used with or without
chemicals •Machine washable •Each cloth measures
12" x 14" •Pack of five premium cleaning cloths
MCM Part #
21-9255
ONLY
$8.99
Microfiber
Cleaning Cloths
•A safe and effective way
to clean sensitive electronic
equipment and other
sensitive surfaces •Can
be used dry or with screen
cleaners to remove dirt,
dust and other contaminants without scratching
surface •Reusable or disposable •Available in
two grades for a variety of applications
MCM Part #
Qty.
170g Economy Wipes
21-11775
25
21-11777
10
220g Super Wipes
21-11780
25
21-11782
5
Dimensions
ONLY
6" x 6"
12" x 12"
$5.99
4.99
8" x 8"
12" x 12"
9.99
7.99
100-Pack of 4"
Lint-Free Cotton Wipes
12" x 12" Microfiber Polish Cloth
•High-quality, high-technology cleaning pads
•Made of specially woven lint-free cotton •Specially
designed thread weave traps and holds dirt particles
away from surface being cleaned •Static free
•Solvent and acid resistant
•Optical-quality microfiber cloth delivers a quality
shine on your guitar •Works on all finishes, including
nitrocellulose lacquer •Ultra-fine stitch-free design
won't scratch or abrade •Safe on all coated
and uncoated finishes •Mfr. #GLM-112
MCM Part # (1-9)
21-1080
$14.99 MCM Part #
20-5010
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
(10-24)
$14.69
(25-49)
$14.40
(50-up)
$14.11
www.MCMelectronics.com /1-800-543-4330
ONLY
$5.59
1209
11
Cleaning and Chemicals - Swabs, Wipes and Brushes
Brushes
A
B
13" Horse Hair Brush
C
•Soft horse-hair bristles are great for cleaning
work areas without scratching delicate surfaces
•Sweeps up a variety of materials; from dust
to bolts •13" wooden handle •Bristle
measurements: 7" (L) x 3" (W) x 21⁄2" (D)
Hand Brushes
•An variety of brushes for use on various surfaces and
applications COCO Brush: •Natural COCO fibers
•Designed for soft-sweeping on floors •Suitable for
indoor use BASSINE Brush: •Natural Bassine fibers
•Designed for use on streets, driveways, patios, garages
etc •For outdoor use in wet and dry conditions STIFF
Brush: •Stiff PVC bristles •Designed for long life
outdoor use
Fig.
A
B
C
MCM Part #
21-11720
21-11722
21-11724
Description
Coco brush
Bassine brush
Stiff brush
ONLY
$3.99
2.99
2.99
(1-5)
$5.99
(6-up)
$5.39
•Nail cleaning brushes for various
precision cleaning applications
Description
Wooden brush
Plastic brush
ONLY
$1.99
0.99
Seven Piece Paint Brush Set
•A variety of wood-handled paint brushes for
contractors and homeowners •60% polyester and 40%
bristle for superior results with all paints and finishes
Set includes: •1", 11⁄2", 2", 21⁄2", and 3" varnish
brushes •4" wall brush •2" angle sash and trim brush
6" Cleaning Brush
•This cleaning brush has long 2" bristles which allow
for cleaning deep into cracks and crevices •Also useful
to apply solvents to various surfaces •Strong wooden
handle •Length: 6"
MCM Part #
22-9738
MCM Part #
21-11816
•Brushes for cleaning with
solvents, applying coatings
and a host of other uses
•Holds up against
chemicals such as Freon
TF, Flux Solve, etc.
•All brushes are 6"
long •Seven piece
assortment of different widths
ONLY
$2.99
10" Wire Brush
Nail Cleaning
Brushes
MCM Part #
21-11726
21-11728
MCM Part #
22-9262
•Useful for cleaning metal before
welding or treating •Heavy-duty
construction and comfort grip handle
allow for prolonged use •Made of
brass steel wire •Length: 10"
Acid Brushes
MCM Part #
21-1290
MCM Part #
22-14005
ONLY
$9.99
(1-9) $3.49 (10-24) $3.14 (25-49)
$3.11
ONLY
$1.29
Wire Brush Set
•Small dial cleaning brush is great for precision
cleaning in tight spaces •Flexible plastic handle and
soft white bristles, ideal for dusting of keyboards or
work stations •Also useful for applying various
solvents •Length: 4½"
A set of six brushes
for a variety of cleaning needs. •Two brass brushes
for cleaning dirt and paint from most surfaces
•Two steel brushes for removing rust and grime
•Two nylon brushes for detail cleaning, including
plastics and upholstery •Brush heads: 13⁄8" x 3⁄8"
•All brushes 7" in length
MCM Part #
22-16350
MCM Part #
22-9732
Dial Cleaning Brush
Dust Cleaning Brush
•Multi-purpose cleaning brush helps
remove dust and dirt from electronics,
computers and other items •Soft brush
will not damage or scratch surfaces
•Handle length: 6¼" •Brush length: 6"
MCM Part #
21-11815
ONLY
$2.99
ONLY
$1.99
TechBrush™ General
Cleaning Brushes
2032
ONLY
$2.99
2021
2022
Tech Spray has designed a brush line which offers a
2025
2027
brush for your specific needs, whether you are cleaning
sensitive optics or scrubbing heavy soils. The bristle cut is
designed to offer optimum cleaning with minimum effort. The quality natural bristle
materials selected are thoroughly cleaned prior to manufacturing. #20-3986 is ESD safe.
Specifications Bristle length
Bristle width
Bristle trim
Bristle material
Handle material
Handle length
Detailing Brush Set
•The ideal cleaning
accessory for the hardto-reach or precision
jobs •Removes dirt,
dust, grime, wax, and other
debris •Oversized, cushion grip handles
for better control •Includes: Finishing tool,
dusting brush, and vent brush •Mfr#27033
MCM Part #
22-11130
1210
ONLY
$3.99
MCM Part #
20-2281
20-2291
20-2292
2032
⁄4"
1
⁄2"
1
⁄2"-3⁄16"
Horse hair
Plated steel
41⁄2"
1
Mfr. #
2032
2021
2022
(1-5)
$9.99
5.59
10.99
2021
13⁄8"
5
⁄16"
7
⁄16"
Hog bristle
Wood laminate
73⁄4"
(6-11)
$9.19
5.40
10.77
(12-up)
$8.24
5.18
10.55
www.MCMelectronics.com /1-800-543-4330
2022
21⁄4"
1"
3
⁄4"
Hog bristle
Wood laminate
83⁄8"
2025
13⁄8"
5
⁄16"
7
⁄16"
Brass-
.003"
Wood laminate
73⁄4"
MCM Part #
20-2294
20-2296
20-3986
Mfr. #
2025
2027
2042
2042
2027
7
⁄8"
3
⁄8"
1
⁄2"
Hog bristle
Wood
2042
13⁄16"
3
⁄8"
7
⁄16"
Horse
hair
Aluminum
5"
67⁄16"
(1-5)
$11.99
9.49
24.49
Follow us on:
(6-11)
$11.79
8.88
24.00
(12-up)
$11.35
8.50
23.52
&
Cleaning - Cleaning
and Chemicals
11
Vent Cleaning
Connector Cleaning Brush
•Sturdy reusable nylon cleaning tip is
lint free •Perfect for cleaning A/V connectors
including XLR, patchbays, coax, phono (RCA), and
many more •Bristles can be used for gentle cleaning
or vigorous scrubbing for corrosion cleaning •Size:
4" overall length, 3mm~6mm (W) x 20mm (L) head
MCM Part #
200-288
200-290
Mfr. #
AB-50
AB-100
Qty. (1-3 pkgs.)
50
$17.99
100
29.99
(4 pkgs.-up)
$17.09
28.49
Cell Klear®
Optical Lens Cleaners
MCM Part #
21-13476 Fiberglass Pencil
NEW!
•Provides an easy,
non-liquid solution
for cleaning camera
lenses found on
cellular phones •Removes fingerprints, smudges and
grease marks easily •Safe for all lenses, including multicoated surfaces •Cleaning compound will not spill
or dry out •Long lasting - Up to 500 uses
•Protective cap for when not in use •Mfr. #CK-1
ONLY
$2.99
A pencil which can contain fiberglass or brass
brushes. As the brush is used it can be moved down by
rotating the top of the pencil. Ideal for cleaning PCBs,
copper tracks, etc. Refills are available separately.
MCM Part #
SABU10191
SABU1020210
SABU1019210
Description Fiberglass pencil 10 brass refills 10 fiberglass refills
(1-9) $7.99 11.02 9.99
(10-up)
$7.65
8.32
7.54
NEW!
A
B
NEW!
MCM Part #
21-13478
ONLY
$7.49
Lenspen Optical Lens Cleaners
®
•Provides an easy, non-liquid solution
for cleaning camera lenses, binoculars, telescopes and
all other optical lenses •Uses a retractable dust removal
brush on one end and non-liquid cleaning compound
that never dries out on the other •Safe on all lens
types •Screw on/off cap protects tip when not
in use •Long lasting, up to 50 uses •Available
in three sizes for a wide range of applications
Fig. MCM Part # Mfr. #
A 21-13468
NLP-1
B 21-13470
NMP-1
C 21-13472
NMCP-1
Description
Lenspen® lens cleaner
Lenspen® Minipro®
compact lens cleaner
Lenspen® Micropro®
micro lens cleaner
•10-piece rotary system
comes with everything
needed to clean and
maintain dryer vent
systems •15' max reach
•Can also be used to
clean baseboard heating
vents, downspouts, or under
refrigerator •Prevents duct fires
•Save energy and drying time Includes:
•4" self feeding auger brush •Five 36"
flexible rods •Vacuum adapter •2.5" lint trap
brush •Blockage removal tool •Dryer adapter
•Demo DVD •Drill required for use (not included)
MCM Part #
21-9440
•Pocket sized tool is designed for cleaning glass and
LCD screens on digital cameras, PDAs, camcorders,
cell phones and more •Features a semi-triangular
shaped tip ideal for tough to clean corners of screen
•Long lasting, over 500 uses •Safe on all displays •No
liquids, no mess •Screw on/off cap protects tip when
not in use •Mfr. #NDK-1
Lens Cleaning
C
Digiklear® Digital
Display Cleaner
LintEater™ Dryer Vent
Cleaning System
ONLY
$5.49
7.49
8.29
SensorKlear II™
CCD Sensor Cleaner
NEW!
Two Piece Dryer Vent
and Hose Brush Set
•Helps save money on utility bills and also helps
prevent fires due to lint build up •Removes lint
build-up from dryer vents and hoses improving dryer
performance •Made of flexible wire brush shafts with
nylon bristles •Safe on most surfaces •Includes a 3'
hose brush and 2' 4" vent brush •Mfr. #27162
MCM Part #
22-13580
ONLY
$6.99
Plumbing Maintenance
•The SensorKlear II™ combines the LensPen cleaning
tip with an articulating head to quickly and easily
clean CCD and CMOS sensors •Anti-static carbon
compound is safe for all sensors •Long lasting, up to
100 uses •Easy to use adjustable tip •Protective cap
protects tip when not in use •Mfr. #SK-1-A
MCM Part #
21-13480
ONLY
$36.49
ONLY
$8.99
Drain Suction Pump
•Used to clear and free blocked pipes and
drains •Fits baths, sinks and shower pipes •D Type
handle for a firm grip •Suction pump diameter: 6.3"
DSLR
Pro™ Kit
NEW!
•Contains everything needed to keep optical lenses,
viewfinders and filters clean and functioning at a high
level •Non-liquid cleaning method is safe for all lenses
•Kit is housed in a microfiber carrying pouch that
also works as a cleaning cloth Includes: •Lenspen®
for cleaning optical lenses •Filterklear for cleaning
camera filters •Micropro™ for cleaning viewfinders
•Mfr. #NDSLRK-1
MCM Part #
21-13474
MCM Part #
22-16182
NEW!
ONLY
$16.99
ONLY
$4.99
FogKlear™ Dry
Anti-Fog Cloth
•Provides
environmentally
friendly anti-fog
protection for binoculars, camera
lenses, screens, glasses and more •Natural
woven cloth is long lasting , over 200 uses
•Dimensions: 6" x 7" •Mfr. #FK-1
MCM Part #
21-13484
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
Large Drain Plunger
•Used to unlock kitchen sinks,
garbage disposals, showers and
toilets •Removable handle for compact
storage •Length 15¾" •Plunger diameter: 5"
ONLY
$4.49
MCM Part #
22-16184
www.MCMelectronics.com /1-800-543-4330
ONLY
$4.99
1211
11
Cleaning and Chemicals - Cleaning
Metro Vac™
DataVac®
Electric Duster
•Compact and comfortable
to use •Unbelievably
powerful 500W motor
literally blasts dust, dirt
and debris off
expensive computer/
electronic equipment
to keep it running at
peak efficiency •0.75 Peak HP •70CFM air flow
•12' cord •Includes nozzle attachments •Mfr. #ED500
Drain Cleaning Snake
•Used for cleaning blocked
pipes and drains •Integrated
6mm handle •5' 10" in length
MCM Part #
22-16180
ONLY
$3.99
MCM Part #
83-12076
83-14908
Description
Electric duster
Replacement filter
ONLY
$69.49
3.99
Vacuums
Omega Supreme Plus Vacuums
Drain Rod Set
•Useful tool for plumbers to
extend reach for pipe and drain
cleaning •Manufactured from
polypropylene with zinc-alloy and
brass end connections •Ten rods with
two attachments •29' 6" long when fully
assembled Includes: •Nine 36.2" rods
•Double worm screw •Plunger
MCM Part #
22-16186
ONLY
$19.99
Blowers
Dust Bulb with Flexible Tip
•Economical and
“green” replacement for
traditional dusters •Delivers a
blast of air for quick and easy removal
of dirt, dust and other debris •Ideal for board level
repair, computer repair, cleaning keyboards, vents
and much more •Flexible tip for precision cleaning
•Ergonomic rubber grip provides comfort
MCM Part #
21-10660
ONLY
$1.99
Omega Plus Vacuums
•An ESD safe, quiet, powerful and economical vacuum
ideal for service technicians of all types •Motor uses
less energy than standard service vacuums •Made form
high-impact Starex flame retardant ABS polymer for
durability Features: •Self storage of all accessories in
the vacuum cover •1,000 hour motor with over-heat
protection •Comes complete with a 6' ESD safe
stretch hose, 16" ESD safe flexible wand, ESD safe
crevice tool and detachable power cord •#21-4475
has a cartridge filter for toner, color toner, dirt and
dust •#21-11860 has a HEPA cartridge filter that is
99.97% efficient at .3 micron •#21-11865 has HEPA
filter and an electronic line filter to suppress EMI/RFI
Specifications: •1HP motor •One gallon
capacity •Power: 628W, 5.2 amp •Weight:
11 lbs. •Noise level: Less than 73 dB
MCM Part #
Description
ONLY
21-4475
Omega Plus vacuum
$199.00
21-11860 Omega Plus vacuum with HEPA filter 199.00
21-11865 Omega Plus vacuum with HEPA filter 199.00
and electronic line filter
•This ESD safe vacuum offers the same great features
as the Omega Plus vacuums but with an ever quieter
and more powerful motor •Motor uses less energy than
standard service vacuums •Made form high-impact
Starex flame retardant ABS polymer for durability
Features: •Self storage of all accessories in the vacuum
cover •1,000 hour motor with over-heat protection
•Comes complete with a 6' ESD safe stretch hose, 16"
ESD safe flexible wand, ESD safe crevice tool and
detachable power cord •#21-11870 has a cartridge
filter for toner, color toner, dirt and dust •#21-11875
has a HEPA cartridge filter that is 99.97% efficient
at .3 micron •#21-11880 has an electronic line filter
to suppress EMI/RFI •#21-11885 has HEPA and
electronic line filters •#21-11890 has a ULPA filter
that’s 99.99% efficient at .12 micron Specifications:
•1HP quiet flow motor •1 gallon capacity •Power: 628W,
5.2 amp •Weight: 11 lbs. •Noise level: Less than 70 dB
MCM Part #
Description
ONLY
21-11870
Omega Supreme Plus vacuum
$229.00
21-11875
Omega Supreme Plus vacuum
229.00
with HEPA filter
21-11880
Omega Supreme Plus vacuum with 249.00
electronic line filter
21-11885 Omega Supreme Plus vacuum with HEPA 269.00
and electronic line filters
21-11890 Omega Supreme Plus vacuum with ULPA 279.00
and electronic line filters
Express Plus Vacuums
NEW!
Hurricane Blower
•Provides a powerful blast of air to safely clean dust,
dirt and debris from a variety of surfaces •Ideal for
cleaning keyboards, lenses, sensors, SLR mirrors and
much more •High quality rubber bulb is resistant
to high and low temperatures •Double valve design
prevents dust buildup and refills quickly •Mfr. #HB-1
MCM Part #
21-13482
1212
ONLY
$8.99
•An economical, compact, easy to operate and powerful
vacuum ideal for electronics, office equipment, service
technicians of all types and more •Weighing just four pounds the Express
Plus is one of the lightest portable vacuums available •Replacement
cartridge filters install with a snap and without a mess •Comes
standard with a .3 micron filter (#21-11970 has a 99.97% efficient
HEPA filter) •Vacuum and accessories are ESD safe •Includes
hose, round dust brush, gooseneck, crevice tool and power cord
Specifications: •600W motor •One quart dry particulate
filter •Weight: 4 lbs. •Water lift at hose: 50"
MCM Part #
21-8594
21-11970
21-4474
21-11975
Description
Express Plus vacuum
Express Plus vacuum with HEPA filter
Two piece replacement filters
Two piece replacement HEPA filters
www.MCMelectronics.com /1-800-543-4330
ONLY
$126.99
179.00
21.99
39.99
Follow us on:
&
Cleaning - Cleaning
and Chemicals
11
Backpack HEPA Vacuum
•A large 8 quart dry particulate filter and a
comfortable, ergonomic design make this
vacuum ideal quick, efficient cleaning of large
areas •Four stage high efficiency filtration
with HEPA exhaust filter •8 quart
disposable filter bag •Air powered
turbo floor brush •Stainless steel
telescopic wand with 20 height
adjustments •Easily converts
to a blower •Accessories
included •Adapts to right
or left handed operation
Specifications: •8 quart
capacity •Power: 1400W,
12 amp •Weight:
10 lbs. •Noise level:
74 dB •Motor
Airflow: 71 CFM
MCM Part #
Description
21-11850
Backpack HEPA vacuum
21-11855
Backpack HEPA filter bags – 5 pack
C
Electronics Vacuum
•A powerful unit with high efficiency to clean up
most business equipment such as computers, copiers,
facsimiles and many other consumer electronic devices
•Advanced filtration allows you to pick up lint, cotton
fibers and toner from laser printers and copiers
•Comes complete with 10' stretch hose, wand,
crevice tool, crevice brush, brush and needle
nozzle •Three year limited manufacturer’s
warranty •Weight: 9 lbs. 14 oz. •Mfr. #497AJM
ONLY
$179.00
24.99
D
B
A
MCM Part #
108-535
ONLY
$269.99
Vacuum filters and accessories for 3M electronic vacuum
(#108-535)
MCM Part # Description
(ea.) (2-up)
108-3660 Type 1 filter (small particle) $30.99 $29.99
108-540
Type 2 filter (dust and toner) 19.99 19.62
108-3790 32" hose, stretches to 34.99
approximately 10'
108-3795 50" hose, stretches to 49.99
approximately 16'
#21-11965
E
Eight piece kit converts any
vacuum cleaner into a
powerful dirt grabbing
mini vacuum by converting
standard hose into a
precision electronics
cleaner. Includes 3'
flexible hose and five nozzle
attachments.
H
L
K
MCM Part #
HCTV High
Capacity Vacuums
Omega Series
Vacuum Accessories
•An assortment of accessories and replacement
parts for both the Omega Plus and Omega
Supreme Plus vacuum cleaners
Fig. MCM Part # Description
ONLY
A 21-11895 ULPS filter, 99.99% @12% micron $59.99
B 21-11900 Single filter, .3 micron
10.99
C 21-11905 HEPA filter, .3 micron
29.99
D 21-11910 Backpack harness
79.99
E 21-11915 ESD safe micro gooseneck brush 10.99
F 21-11920 6' vacuum hose, black
34.99
G 21-11925 10' vacuum hose, black
37.99
H 21-11930 16' vacuum hose, black
49.99
J 21-11935 ESD safe round oval dusting brush 9.99
K 21-11940 ESD safe crevice tool
6.99
L 21-11945 Crevice tool brush
2.99
MCM Part #Mfr. #
Description
ONLY
21-11510 35840
Blow Vac
$469.00
21-11515 35841Blow Vac with adjustable air flow 599.00
Accessories
21-11520 35834
Replacement hose
99.99
21-11525 35835
Mini attachment set
69.99
brushes, nozzles and crevice tools
21-11530 35836
Two-part blow assembly
159.00
21-11535 35837
Hepa filter media
69.99
21-11540 35838
Filter media
18.49
21-11545 35839
Filter bag set – 10 pieces
54.99
Micro Vacuum
Attachment Kit
G
J
•Dual function tool removes dust and debris from
various surfaces including ESD protective areas
•Ideal for telecom, office automation, labs, medical
and electronic production •Dissipative housing and
attachments •Durable compact design •Advanced
5 stage filtration system •Particle retention down
to 0.3 micron •#21-11515 has adjustable airflow
via rotary dial for precision dust removal Includes:
•ESD safe stretch hose (extends over 4') •Soft rubber
nozzle •Hard crevice nozzle •Low charging
carrying strap •Detachable power cord
•Micromotorfilter and filterbag
#21-11950
#21-11960
F
Blow Vac
ESD Safe
Vacuum
21-3210
•High capacity vacuum is useful
for cleaning high volumes of non-hazardous dry
particulates •Large five gallon capacity is ideal for
in-house servicing, copier or printer technicians
and laser cartridge manufacturers •Comes standard
with a 0.3 micron resealable, disposable filter canister
(#21-11955 includes a five gallon HEPA filter)
•Convenient, freewheeling, detachable roller base
•Vacuum and utensils are ESD safe •1HP motor
•1,000 hour motor •Comes complete with disposable
filter, 10' crush proof hose, 16" flexible wand,
crevice tool, crevice tool brush, base and
detachable power cord •Volume: 97cfm
MCM Part #
21-11950
21-11955
21-11960
21-11965
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
Description
Vacuum
Vacuum with HEPA filter
Filter
HEPA filter
ONLY
$449.00
499.00
59.99
64.99
(kit)
(2-4 kits)
(5 kits-up)
$9.99
$8.62
$6.68
DataVac PC Sweeper
The DataVac® PC Personal
Cleaner sweeps up and cleans
out dust and dirt, even in the
smallest places. The smallest
speck of dirt on printers,
keyboards, disk drives, and
other office equipment can
damage sensitive circuitry.
The DataVac® PC protects your valuable high-tech
hardware from troublesome breakdowns, costly repair,
and even permanent damage. Features: •115V power
(4x the power of battery operated units) •Lightweight
and compact weighing only 8 ounces •More effective
and economical than canned air Includes: •Crevice
cleaning tool •Two dusting brushes •Two filters
MCM Part # 83-12073
www.MCMelectronics.com /1-800-543-4330
ONLY
$19.99
1213
11
Cleaning and Chemicals - Cleaning
Mighty Mouth Upright Vacuum
Flex™ Cordless Mini Canister Vacuum
Cordless or Corded Wet/Dry Vac
•Runs off of 12V~18V DeWalt battery packs
(not included) or 120VAC (included) •Gore™ wet/dry
filter eliminates changeovers and traps 99.7% of drywall
dust •Washable filter;
tap or rinse with water to clean •Heavy-duty 5' rubber
hose provides durability and flexibility •Drain port
on 2 gallon tank for easy emptying of liquids •On-board
hose, cord and accessory storage provides convenient
transport and storage •Weight: 7.2 lbs.
MCM Part #
22-9550
22-9552
Description
Wet/dry vac
Replacement filter
ONLY
$119.00
22.99
•Cordless and portable making it the ideal vacuum
to tackle chores without using your full size vacuum
•Handy for use at home, in the car or in the shop or
garage •4' flexible hose reaches hard to clean areas
•High-performance motor with cyclonic action
delivers strong suction •Three stage filtration system
•Accessory storage caddy to neatly store accessories
•Easy empty dirt canister Includes: •Vacuum with 4'
hose •2-in-1 nozzle/brush tool •Long crevice tool •Pet
hair cleaning tool •Dishwasher safe filter •Charger
•Mfr. #FHV1200
MCM Part #
22-11450
ONLY
$79.99
YEAR LIMITED
2WARRANTY
ETL approved
MCM Part #
22-9224
ONLY
$159.00
Description
10 pack replacement bags
5 pack HEPA replacement bag filters
5 pack foam filers
5 pack filtrate filters
Oreck XL® Commercial Vacuum
•Lightweight, powerful, commercial
vacuum •Ideal for field installers
and maintenance professionals to
clean up job sites •Replacement
bags available Features: •Highperformance, high speed precision
motor creates an air velocity of
9,000 feet per minute •Weighs
only 8 lbs. •Helping Hand® handle
virtually eliminates squeezing of
the hand, bending and twisting of
the wrist •Micro Sweep® system
•Edge brushes •Clear, non-marring
bumpers •Cord guard •35' cord
It may be small, but it’s mighty!
The 41⁄2 lb. ultra powerful Super
FastVac is the ultimate hand vacuum. Features: •Can
be hand-held or carried over the shoulder using the
heavy-duty carrying strap with shoulder pad •Comes
complete with eight standard cleaning attachments,
plus a five piece set of mini vacuum attachments, and
a special adjustable angle adaptor tool •Includes an
extra-long 25' electrical cord •Micro-lined antibacterial dust bag which captures microscopic
particles with 99.7% filtration efficiency •Can
be used as a powerful, portable blower Specifications:
•Motor speed: 33,000rpm •740W, 6.3A dual-stage
electrical motor •82" of water lift •Air movement: 102
cubic feet of air per minute •Color: Midnight black
Description
Super FastVac 500
Replacement dust bags (6/pk)
Cloth shake-out dust bag
ONLY
$249.00
19.99
30.99
Brooms
Super FastVac 500
MCM Part #
22-8550
22-8553
22-8554
1214
MCM Part #
21-11985
21-11990
21-11995
21-12000
MCM Part # Description
22-9160
Vacuum
Replacement bags
22-9162
9-pack
22-9164
25-pack
18 Volt Cordless Wet/Dry
Portable 1⁄2 Gallon Vacuum
•Small but strong, this hand held shop vacuum is able
to clean up everything from leaked paint to spilt screws
•18V XRP™ battery works with other 18V DeWalt
tools and chargers •1⁄2 gallon tank with heavy-duty
latch is easy to empty and clean •Dual clean-up modes
allow for clean up with either the front utility nozzle or
heavy-duty extendable rubber hose •Washable Gore™
HEPA Wet/Dry filter traps 99.97% of dust at 0.3
microns for easy breathing •Tool weight: 6 lbs.
Includes: •18V XRP™ battery •One hour charger
•Mfr. #DC515K
•The Mighty Mouth vacuum is designed
to pick up small particles like dust and
soot as well as larger items like pens, pencils,
paperclips, etc. •14" wide cleaning area cleans
large areas fast •Debris is swept directly into
HEPA bag so there are no hoses to clog
Features: •Quiet operation •Telescoping
handle •Easy change filtration bags
•Ball bearing 360° wheels •Dual upright
motor •Includes two HEPA bags
Specifications: •1160 watt motor
•100 watt brush motor •Noise
level: Under 70dB •Weight:
21 lbs. •Water lift: 70" •Air
flow: 100 cfm •50' power cord
ONLY
$84.99
5.99
8.99
www.MCMelectronics.com /1-800-543-4330
Mini Magnetic Sweeper
•Ideal for use in the home, shop, garage,
warehouse or yard •Picks up nails, tacks,
screws, bolts, nuts, clips and more
•Hanging hole for easy storage •Magnetic
pulling force of 4.5 lbs. •Pick up surface
dimensions: 14" x 1" •Length: 40"
MCM Part #
22-14185
ONLY
$15.89
Follow us on:
&
ONLY
$21.99
25.99
8.99
11.99
Cleaning - Cleaning
•Heavy-duty push broom is the
durable solution for all surfaces
•60" steel handle •The stiff bristles
are uniquely designed to dislodge dirt
and debris while keeping dust to an
absolute minimum •Swivel hanger
tip for easy storage •Overall
surface width: 24" •Mfr. #54074
MCM Part #
22-11175
Cleaning Cards
Funnels
Multi-Surface Push Broom
Flexible Spout
Steel Funnel
Fax Machine Cleaning
Sheet Four Pack
•Use to prevent spills and overflows while
pouring engine oil, transmission fluid,
windshield wiper fluid, brake fluid, and
more •Lightweight design with extra
wide funnel and flexible spout helps
with reaching confined areas of small
engine compartments •Mfr. #16040
ONLY
$14.99
MCM Part #
22-10940
Dust Pans
11
and Chemicals
A convenient, lint free sheet
designed to remove dust and
film from the paper path,
rubber rollers and scanner,
ensuring that each faxed
message is transmitted smoothly. Features:
•One sheet per foil pouch, four pouches
per pack •8" x 11" •Mfr. #8015 4PK
ONLY
$4.99
MCM Part #
20-2913
(1-5 pkgs.)
$9.99 (6-11 pkgs.)
$9.69 (12-23 pkgs.)
$9.59
17" Aluminum Dust Pan
•Useful for cleanup around
the house, garage, workshop
or office •Extra wide
collection area for fast
easy pickup •Rubber inlay
to prevent movement
•Durable all aluminum
construction •Mfr. #54086
Flexible Funnel
MCM Part #
22-15640
MCM Part #
21-15508
•PVC funnel has a flexible neck for versatile use
•Detachable neck makes for easy cleaning and storage
•Removable gauze filter •Funnel mouth size: 41⁄3"
ONLY
$9.99
ONLY
$0.99
Dustpan Set
•Set includes a dustpan and
brush made of sturdy
plastic •Flexible rubber lip
and soft bristle brush make
for quick and easy cleaning
MCM Part #
21-11130
The revolutionary Waffle Technology™ cleaning card
ensures pressurized contact to areas not accessible
with flat cards, resulting in a superior clean. This
product is recommended for all bill accepting
equipment found in casinos, vending, amusement,
and other industries. Features: •The only card that
cleans the entire surface of recessed lenses •Unique
“independent suspension” dramatically increases
cleaning pressure •Cleans other surfaces traditional
flat cards cannot touch •15 cards per box
Price per Box
MCM Part #
(1-5)
(6-11)
(12-23)
20-4270
$33.99
$33.65
$33.15 <
ONLY
$1.99
Ultrasonic Cleaners
ONLY
$1.19
Ultrasonic Cleaner
with Timer
•Ultrasonic cleaning is
the safest, fastest and
most effective way to
clean •The VTUSC3U is
effective for removing
particles and contaminates like waxes, oils, dust,
dirt, fluxes and others from many surfaces like metals,
plastics, glass, circuit boards and many other surfaces
•Built-in heater heats liquid up to 149° to help
maximize cleaning process •This cleaner can
be used anywhere from the shop, on your
workbench, at home or in the classroom
•High-power transducer for superior cleaning
results •Large 0.68 gallon tank capacity
ONLY
$159.00
(24-up)
$32.57
Four Piece Funnel Set
•Plastic funnel set includes four sizes useful for
a wide variety of applications around the garage,
workshop or home •Made of polypropylene
•Sizes: 50, 75, 100 and 125mm
MCM Part #
21-11095
MCM Part #
21-9465
Bill Validator
Cleaning Cards
Waffle
Technology™
Cleaning
Cards
•Significantly
increases the
reliability of
card readers •Cleans the entire surface of rounded read
heads •Cleans other surfaces traditional flat cards will
not •Recommended for POS terminals, ATMs, hotel
door locks, pay at the pump, and many others •Card
size: 3" x 5" •40 cleaning cards per pack
MCM Part #
20-4272
Syphon Pump 2pc Set
ONLY
$31.99
•Designed to strip twisted-pair UTP/STP data cables
(Cat5, Cat 5e and Cat6) and terminate the wires into
110 blocks •It’s fast and easy to use and will selfregulate strip depth •This tool can also be used on
multi-pair cable, hook-up wire, and more •Excellent
for Cat5, Cat5e, and Cat6 data cable •Built-in 110
punchdown (punch only) •Fast and easy to use
•Mfr. #G601
MCM Part #
22-11105
Note: Due to the chemical content, some products can only be shipped
by ground service. Some chemicals require proof of commercial use.
Some chemicals are not for sale to customers in California.
ONLY
$2.99
www.MCMelectronics.com /1-800-543-4330
1215
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement