PROFESSIONAL AUDIO SYSTEM

SUBDRIVE12A

OPERATING MANUAL

Ver. SUBDRIVE12A-EN-1.1

LSS Advanced Speaker Systems

Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: [email protected] - Internet: www.lss.it

SUBDRIVE12A__________________________________________________________________________

NOTICE:

LSS products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or damage to property .

© LSS, 2016

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of LSS.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because

LSS is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.

2| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

SUMMARY

INTRODUCTION ............................................................................................................................................ 4

SAFETY AND WARNING .............................................................................................................................. 5

APPLICATION ................................................................................................................................................. 6

PHYSICAL DESCRIPTION ........................................................................................................................... 6

TECHNICAL SPECIFICATIONS .................................................................................................................. 7

INSTALLATION AND WIRING ..................................................................................................................... 8

WEEE DIRECTIVE ....................................................................................................................................... 10

DIMENSIONS ................................................................................................................................................ 11

NOTES ........................................................................................................................................................... 12

Operating Manual ver. SUBDRIVE12A-EN-1.1 |3

SUBDRIVE12A__________________________________________________________________________

INTRODUCTION

Congratulation on the purchase of your new LSS loudspeaker.

LSS produce professional audio products – the result of exceptional engineering and meticulous craftsmanship.

This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction.

Please read this manual plus any accompanying manual and follow all relevant precautions and instructions. This should allow you to obtain the maximum performance from your new loudspeaker.

Where there are conflicts or overlaps, the information in any accompanying manual supersedes the information in this manual.

Quality innovation and versatility, this is a summary of the new system developed by LSS for professional sound users.

Advanced solutions: self powered system with digital module DSP by

POWERSOFT, extreme ruggedness, ease of transport and use of professional components.

4| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

SAFETY AND WARNING

IMPORTANT! SAFETY WARNING!

In the interest of their own and others' safety and to prevent voiding the warranty, we recommend a careful reading of this section before using the product.

- This product was designed and manufactured to be used as a speaker system in the context of a typical sound reinforcement system.

The use for any purpose other than these is not provided by the manufacturer and is therefore under the direct responsibility of the user / installer.

- This device complies with class I (must be connected to the outlet with a protective earthing connection).

TO AVOID THE RISK OF FIRE AND / OR ELECTRIC SHOCK*:

- Do not expose this system to rain or moisture. Do not expose the apparatus to dripping or splashing water. Do not place objects filled with liquids, such as drinks, on the apparatus.

- Before connecting the system, be sure the mains voltage corresponds to that stated on the product.

- Connect this appliance to a power outlet with earth contact, according to national security force, via a power cable of adequate section ends with a plug or connector that meets the applicable safety regulations.

- The unit is connected to the network even when the power switch is in position '0'

(OFF). Before any maintenance, disconnect the power cable from the outlet.

*Risk of electric shock only for self-powered system.

IMPORTANT! SAFETY PRECAUTIONS!

Read This First.

Read and heed all warnings and safety instructions in this Manual before using the product.

Failure to follow all precautions can result in equipment damage and / or personal injury.

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings and follow all instructions.

4. Use only attachments/accessories specified by the manufacturer.

5. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

6. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

7. LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage

CAUTION: This product is energized as long as it is connected to the AC.

CAUTION: Allow at least six inches of free space all around the amplifier for sufficient ventilation.

Operating Manual ver. SUBDRIVE12A-EN-1.1 |5

SUBDRIVE12A__________________________________________________________________________

APPLICATION

LSS’s SUBDRIVE12A is a reflex sub woofer designed to reinforce the extremely low range frequencies of small portable equipment in Live Music or small installations in disco Bar Pub etc.

The extremely compact cabinet makes it easily transportable and versatile for portable applications. SUBDRIVE12A surprise for his big punch and high dynamic response and the extreme low frequency.

LSS's SUBDRIVE12 uses a loudspeaker from 320 mm (12") with neodymium magnet and fiberglass coil of 100 mm (4"). Low distortion and high dynamic distinguishes this product. The cabinet is constructed from

Birch plywood of 15 mm with anti stratch Black polyurethane finish. SUBDRIVE12A has a Digital Amplifier system with DSP controller from 1500 W for the sub and one integrated stereo module out for satellites of 350W + 350W. It is possible to choice within 3 different preset to store for different model of LSS speaker (on request) and one preset flat for others satellites speakers with hi-cut 80Hz.

PHYSICAL DESCRIPTION

[A]

TOP

SIDE FRONT

[D]

REAR

BOTTOM

[A]

[C]

[B]

[E]

[A] Handles

[B] Enclosure Cabinet

[C] Reflex

[D] Connection Panel

[E] Feets

[F] Mounting Pole Plate

Materials and construction meet the highest professional standards to ensure maximum reliability

[F]

6| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

TECHNICAL SPECIFICATIONS

PHYSICAL

SYSTEM PERFORMANCE

MECHANYCAL

Dimensions mm (±1 mm)

[Inches]

Weight Kilograms

Height 400 [15.75’’]

Front Width 500 [19.68’’]

Depth 450 [17.71”]

Net Weight 27

Shipping Weight 29

±5 dB 40 Hz ~ 180 Hz

Frequency Response

-10 dB 35 Hz

Sensitivity (1 Watt @ 1 m) LF Range 95 dB

Max SPL Calculated

(Power EIAJ) [PEAK]

127 dB

[130 dB]

Nominal Input Impedance (Ω) LF Range 8 Ω

Power Handling (Watt cont.

EIAJ)

[PEAK]

LF Range

1500 W [3000 W]

350 W+350 W [700 W+ 700 W]

Nominal Dispersion (@ -6 dB) 360°

Enclosure material

Finish

Grille

Connectors

Birch Plywood of 15 mm [0.60 inches]

Texture polyurethanic black paint

Powder coated perforated steel with anti-dust foam

Neutrik Powercon

Optional Accessories Soft Cover

Operating Manual ver. SUBDRIVE12A-EN-1.1 |7

SUBDRIVE12A__________________________________________________________________________

INSTALLATION AND WIRING

SUBDRIVE12A must be installed on the floor. It is possible to install more speakers in stack configuration making fit Top Sub’s feet in bottom sub’s recesses.

On the Top of SUBDRIVE12A there is a plate for fixation of a pole, it can be used to install another speaker.

CONNECTION PANEL

Speakon connector for left satellite

XLR Out connector

On/Off button

Speakon connector for right satellite

XLR In connector

AC240V VDE connector

8| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

Choose a safe mounting location, so as to prevent the cables can be stepped on or create tripping hazards.

Connection are made via 3-pin XLR connector.

Before making connection between mixer and active speaker, make sure all the switches of the speakers are turned off and the mixer volume is turned down. To avoid a sudden signal, making connection, then turn on the mixer first and then the speakers. Turn on the amplifier by the power switch to position 1 (on).

When the system start, it will turn on 3 LEDs, after a few seconds will stay on only two or three if the input signal is present, when the amplifier turn on, start with the preset the previously loaded.

You can now use the system.

If necessary, adjust the volume by adjusting the potentiometer.

If you want to change the preset, follow the instruction below.

LOADING A PRESET

The active preset is indicated by the corresponding LED. It is possible to change presets by pressing the center pushbutton P.

P1 – preset 1 (green): indicates the factory presets (CUSTOMIZABLE)

P2 – preset 2 (green): indicates the factory presets (CUSTOMIZABLE)

P3 – preset 3 (green): indicates the factory presets (CUSTOMIZABLE)

P4 – preset 4 (green): indicates the factory presets FLAT

Operating Manual ver. SUBDRIVE12A-EN-1.1 |9

SUBDRIVE12A__________________________________________________________________________

WEEE DIRECTIVE

WEEE Directive

Warning!

The product is marked with this symbol which indicates not to discard electrical and electronic equipment via the normal procedure for disposal of household waste. For these products there is a diverse collection system in accordance with legislation that requires proper treatment, recovery and recycling of used products. For more information please contact the appropriate local authority.

The black bar underneath indicates that the product was placed on the market after 13 August 2005.

INFORMATION FOR PROPER DISPOSAL

For home users

In the European Union

Warning: To dispose of this equipment, do not use the ordinary dust bin!

The electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used products. Following the implementation by member states, private households within the EU can give free electrical and electronic equipment to designated collection facilities *.

In some countries (*), your local retailer may withdraw the old product for free if you purchase a new one of similar type.

* For more information please contact the appropriate local authority.

In countries outside the EU: please contact your local authorities and ask for the correct method of disposal.

In Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you do not purchase a new product.

Further collection facilities are listed on the homepage or www.swico.ch

. www.sens.ch

.

For professional users

In the European Union

Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall.

Might be charged for the costs of collection and recycling. Small products

(and amounts) might be taken back by your local collection facilities.

In Spain: contact the established collection system or the local authority for collection of used products.

In countries outside the EU: please contact your local authorities and ask for the correct method of disposal.

10| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

DIMENSIONS

TOP

SIDE

45cm

FRONT

52cm

BOTTOM

REAR

52cm

Operating Manual ver. SUBDRIVE12A-EN-1.1 |11

SUBDRIVE12A__________________________________________________________________________

NOTES

12| Operating Manual ver. SUBDRIVE12A-EN-1.1

________________________________________________________________________________

CONTACT INFORMATION:

LSS Advanced Speaker Systems

Via On. Longo 53

89024 Polistena (RC) ITALY

Tel (39) 966 9321299 – Fax (39) 966 933007

Email: [email protected] - Internet: www.lss.it

Operating Manual ver. SUBDRIVE12A-EN-1.1 |13