EAW SUBWOOFER AS415e Specifications

SPECIFICATIONS AS415e

DESCRIPTION

A dedicated low frequency system in a trapeziodal enclosure.

Includes a vented 15-in woofer.

APPLICATION

The AS415e is engineered for permanent installations. It complements the AS460e or AS490e mid/high modules to provide full range performance in a flexible, modular, multienclosure format. Its trapezoid angles create the ideal splay for arrays of 2x AS460e's. Includes comprehensive 3/8"-16 threaded mounting/suspension points. Six year warranty.

Applications include:

Stadiums Arenas

Performing Arts Centers Houses of Worship

PERFORMANCE

Frequency Response (Hz)

±3 dB 60 Hz to 500 Hz

-10 dB 47 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 97

Impedance (Ohms)

LF 8

Power Handling (Watts, Continuous)

LF 600

Recommended High-Pass Frequency

24 dB/Octave 40 Hz

Calculated Maximum Output (dB SPL @ 1m)

LF Peak 130

LF Long Term 124

PHYSICAL

Product Group I

Configuration Dedicated low frequency system

LF Subsystem & Loading 1x 15-in, vented

Cabinet Type (shape) Trapezoidal

Enclosure Materials Exterior grade Baltic birch plywood

Finish Wear-resistant textured black paint

Connectors 2-Contact terminal strip

Suspension Hardware (18) 3/8"-16 threaded mounting points (4 each top and bottom and sides, 2 on back)

Dimensions

Grille Powder coated perforated steel inches millimeters

Height 22.5

Width (front) 24.6

572

626

Width (rear) 16.5

Depth 23

419

584

Trapezoid Angle 10 Degrees per Side

Weights pounds

Net Weight 88

Shipping Weight 103 kilograms

40.0

46.9

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013

EAW products are continually improved. All specifications are therefore subject to change without notice.

FAX 508 234 8251

AS415e/2 pp [email protected]

October 2001 www.eaw.com

Printed in USA

DIMENSIONAL DRAWING

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE

(PI ANGLE).

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE

(NUT PLATE).

SYMBOL INDICATES CENTER OF BALANCE

24.63

22.50

GRILLE PARTIALLY SHOWN

FRONT

INPUT

CL

11.00

4.00

CL

BACK

(16.50)

13.64

A

(1.50)

5.00

19.50

8.50

A

509138 (0) exp 5/14/01

19.39

20°

20°

TOP/BOTTOM

16.56

4.63

16.31

23.00

4.24

18.60

CL

509138 (0)

5/14/01

DIMENSIONS APPLY

TO BOTH SIDES

SIDES

Manufacturing tolerances are +/- 0.13 and +/- 1°

SPECIFICATIONS AS415e

A & E SPECIFICATIONS

The low frequency loudspeaker system shall incorporate a 15in LF transducer that shall be mounted in a vented enclosure tuned for optimum LF response.

System frequency response shall vary no more than ±3 dB from 60 to 500 Hz measured on axis. The system shall produce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 130 dB SPL on axis at 1 meter.

The system shall handle 600 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply, void-free, cross-grain-laminated, exterior grade, Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be 2-contact terminal strip. Eighteen (18) 3/8"-16 threaded mounting/suspension points (4 each top, bottom and sides, 2 on back) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.

The low frequency loudspeaker shall be the EAW model

AS415e.

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013

EAW products are continually improved. All specifications are therefore subject to change without notice.

FAX 508 234 8251

AS415e/2 pp [email protected]

October 2001 www.eaw.com

Printed in USA