LBK/BMH0175/TRITAP/C/CWA/MOG (60985)

LBK/BMH0175/TRITAP/C/CWA/MOG (60985)
Lamp AND Ballast Kit
Ordering Information
Order code: 60985
ANSI code: M57
Description: LBK/BMH0175/TRITAP/C/CWA/MOG
System: Probe Start Metal Halide
UPC: 69549609853
Ballast Information
Line Voltage
120/277/347V
Regulation
Line Volts
+/-10%
Line Watts
+/-10%
Frequency
60 Hz
Circuit Type
CWA
Power Factor (min)
90%
Insulation Class
H(180°)
Min. Ambient Starting Temp. -20º F or -30º C
Line Voltage (Volts)
Line Current (Amps)
Operating
Open Circuit
Starting
Input Watts (W)
Open Circuit Voltage (V)
Drop Out Voltage (V)
UL(1029) Bench Top Rise
Recommended Fuse (Amps)
4 Holes cleared for
#10 thru-bolts
A
B
”
/16
3
21
”
/16
27
120
277
347
1.80
0.78
0.62
1.70
1.30
210
305
60
D
5
0.75
0.55
210
305
140
D
2
0.60
0.43
210
305
175
D
2
/2” 6”
3 15/1
1
3
Dimension A (inches)
Dimension B (inches)
Weight (Lbs)
Lead Lengths (inches)
2.25
3.75
7.50
12
HIGH POTENTIAL TEST (VOLTS)
1Minute
2 Seconds
2000
2500
Open Circuit Voltage Test(volts)
Short-Circuit Current Test (Amps)
Secondary Current
275-335
1.5 - 1.9
Input Current (Amps)
0.70 1.10
0.29 0.50
0.23 0.40
RATING
10 Mfd ± 3%
400 VAC MIN
Dry Film Capacitor
Thermal Plastic Case
Max. Case Temp 100° C
NO PCB`S
3 15/16”
13/8”
CORE & COIL
MOUNTING BRACKET
15/32”
C-01
4 1/4”
2 3/16”
5 1/2”
1 1/4”
347 V
MOUNTING CLIP for round
case (Furnished as standard
KB33
Mounting bracket for
Core & Coil Ballasts
(1 bracket with thru bolts)
LAMP
CAP
CAP
277 V
LAMP
L a mp AND Ball ast Kit
TECHNICAL INFORMATION BULLETIN
120 V
COM
COM
120/277/347 VOLT CONNECTION
Data is based upon tests performed in a controlled environment and representative of relative performance.
Actual performance can vary depending on operating conditions.
Specifications are subject to change without notice.
Lamp AND Ballast Kit
Ordering Information
Order code: 60985
ANSI code: M57
Description: LBK/BMH0175/TRITAP/C/CWA/MOG
System: Probe Start Metal Halide
UPC: 69549609853
LCL
MOL
Lamp Information
Spectral Distribution
Relative Energy
L a mp AND Ball ast Kit
TECHNICAL INFORMATION BULLETIN
Wavelength (nm)
Wattage (W):
175
Initial lumens (lm):
14 000
Mean lumens (lm):
9 100
Lumens per watt (lm/W):
80
Lamp voltage (V):
132
Colour temperature (K):
4 000
Chromaticity (x,y):
0.385, 0.390
CRI:
65
Average life (hrs):
10 000
Lamp lumen depreciation:
0.65% @ 4 000 hrs
Warm up time to 90% (min):
3-5
Hot restart time to 90% (min):
5-10
Burn Position:
Universal
Dimming:
50% rated power
Max base temperature:
210
Max lamp temperature:
400
Socket pulse rating (kV):
N/A
Physical data / Requirements
Shape:
ED28
Base:
Mog Base E39
Finish:
Clear
Luminaire rating:
Enclosed Rated
Diameter (mm/in.):
89.0 (3 1⁄2)
MOL (mm/in.):
211.0 (8 5⁄16)
LCL (mm/in.):
127.0 (5)
Effective arc length (mm):
19.5
Mercury Content (mg):
24
Warning
“R” WARNING: this lamp can cause serious skin burn and eye inflammation from shortwave ultraviolet radiation if the outer envelope of the
lamp is broken or punctured. Do not use where people will remain for more than a few minutes unless adequate shielding or other safety
precautions are used. Lamps that will automatically extinguish when the outer envelope is broken or punctured are commercially available.
Complies with USA Federal Standard 21 CFR 1040.30 and Canada Standard SOR/80-381.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement