Wagner L622 STAT-PAK Moisture Analyzer User’s Guide

W

AGNER

M

ODEL

L 622

STAT PAK

F

OR

W

INDOWS

U

SER

’

S

G

UIDE

500-62202-001 Rev. G

Document No: 500-62202-001

Revision: G

Page 1 of 33 Stat-Pak For Windows User’s Guide

Copyright Notice

StatPak For Windows User’s Guide

© Copyright 2005-2015 Wagner Meters. All Rights Reserved Worldwide. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any other language in any form by any means without the express written permission of Wagner Meters.

500-62202-001 Rev. G Page 2 of 33 StatPak For Windows User’s Guide

Software License Agreement

PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THE ACCOMPANYING

SOFTWARE. This software license agreement (this "agreement") is a legally binding agreement between you and

Wagner Meters. By accepting this license and proceeding to download the software accompanying this agreement and related documentation, whether on disk, in read-only memory or on any other media, (collectively, the "software"), you are agreeing to be bound by the terms and conditions of this agreement. If you do not agree to the terms and conditions of this agreement, do not install or use the software, and promptly return the unused software to the person from whom you obtained it.

1. License. Subject to the terms of this agreement, Wagner Meters grants to you a nonexclusive license to use the software on a single computer. You may make (a) one copy of the software (excluding documentation) in machinereadable form for your exclusive use on a computer and (b) one copy of the software (excluding documentation) in machine-readable form for backup purposes only; provided that each such copy is a true and complete copy, that you reproduce on each such copy the copyright notice and any other proprietary legends on the original copy of the Software, and that no more than one copy of the Software is used at any one time.

2. Restrictions. You acknowledge that the software, and its structure, organization and source code, contain copyrighted material, trade secrets and other proprietary material owned by Wagner Meters. Accordingly, you may not except to the extent permitted by any applicable law (a) de-compile, reverse engineer, disassemble or otherwise reduce the software to a human-perceivable form, (b) modify, adapt, alter, translate or create derivative works from the software,

(c) merge the software with other software, (d) sublicense, network, rent, lease, loan, or distribute the software in whole or in part, or (e) otherwise use or copy the software except as expressly permitted under Section 1. In addition, you may not electronically transmit the software from one computer to another or over a network. All rights in and to the software not expressly granted to you under this agreement are reserved to Wagner Meters.

No warranty or representation is given that the functions contained in the software will meet your requirements, or that the operation of the software will be uninterrupted or error-free, or that defects in the software will be corrected. Furthermore, no warranty or representation is given regarding the use or the results of the use of the software or related documentation.

No oral or written information or advice given by any person or entity shall create a warranty or representation or in any way increase the scope of this warranty.


Wagner Meters is not required to provide any maintenance or support services with respect to the software under this agreement.

Limitation of Liability

Under no circumstances, including negligence, shall Wagner Meters be liable for any consequential, incidental, indirect, exemplary, special or punitive damages, including without limitation any loss of data, or loss of profit, savings, business or goodwill or other similar loss resulting from the use or inability to use the software, even if Wagner Meters has been advised or the possibility of such damages, or for any claim by any third party.

In no event shall the total liability to you for all damages, losses, and causes of action (whether in contract, tort (including negligence) or otherwise) exceed the amount paid by you for the software.

Technical Support

Should you require support, please consult your printed documentation to resolve your problem. If you are still experiencing difficulty, you may contact a Wagner Technical Service representative during normal business hours

—

7:30 a.m. to 4:00 p.m. Pacific Standard Time, Monday through Friday.

Voice: (541) 582-0541

Fax: (541) 582-4138

E-Mail: [email protected]

Mail: Technical Services Department

Wagner Meters

326 Pine Grove Road

Rogue River, OR 97537


T

ABLE OF

C

ONTENTS

T ABLE OF C ONTENTS ......................................................... 5

1 A N I NTRODUCTION TO S TAT -P AK FOR W INDOWS ....... 6

2

3

4

5

About This Manual ___________________________________ 6

G ETTING S TARTED .................................................. 7

Loading Stat-Pak ____________________________________ 7

Loading Internet explorer ______________________________ 7

L622 to PC Connection _______________________________ 8

Running Stat-Pak ____________________________________ 9

Quitting Stat-Pak_____________________________________ 9

Installation Requirements ______________________________ 9

Running the Application for the First Time _________________ 9

Demonstrator Database ______________________________ 10

Special Editing Keystrokes ____________________________ 10

D OWNLOADING D ATA T O T HE M ETER .................... 12

Download Meter Number to the L622 ___________________ 12

Download Company Name to the L622 __________________ 13

Download Date and Time to the L622 ___________________ 13

Download Species to the L622 _________________________ 13

U PLOADING D ATA F ROM T HE M ETER ..................... 14

Upload Measurement Data into Stat-Pak _________________ 14

Upload Species Data into Stat-Pak _____________________ 16

W ORKING WITH THE D ATA ..................................... 16

Custom Species Folders _____________________________ 17

Editing Species Data ________________________________ 17

Data Sets _________________________________________ 18

Creating Summary Reports ___________________________ 19

500-62202-001 Rev. G Page 5 of 33

6

7

8

Adding Groups to a Summary _________________________ 19

Viewing Reports ____________________________________ 19

Printing Reports ____________________________________ 20

S YSTEM P ROPERTIES ............................................ 21

Dates Tab _________________________________________ 21

Settings Tab _______________________________________ 21

Communications Port ________________________________ 22

Language Tab ______________________________________ 22

D ATABASE F UNCTIONS .......................................... 22

Open a New Database _______________________________ 22

Compacting the Database ____________________________ 23

Import/Export Functions ______________________________ 23

L ANGUAGE T RANSLATOR ...................................... 25

Installation Requirements _____________________________ 26

Opening a Resource File _____________________________ 26

Source Language ___________________________________ 26

Translation Language ________________________________ 27

Adding or Editing Text _______________________________ 27

Description Panel ___________________________________ 27

Information Panel ___________________________________ 27

Search Feature _____________________________________ 27

Status Bar Information _______________________________ 28

A PPENDIX A .................................................................... 29

Species List _______________________________________ 29

A PPENDIX B .................................................................... 32

Glossary __________________________________________ 32


1 A

S

N

I

NTRODUCTION TO

TAT

-P

AK FOR

W

INDOWS

Warning: This computer program is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this program or any portion of it may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.

Welcome to Stat-Pak for Windows! This is the most powerful hand-meter moisture analysis program in the wood products industry. This program allows you to manage all aspects of moisture quality control. You can store, recall, and analyze the data collected from the

L622.

The program allows you to:

• Customize your L622 reports with company name and meter number.

• Archive L622 group data to a hard drive or diskette for later retrieval.

• Recall archived reports for viewing and printing.

• Generate custom Summary Reports.

• Export data to popular spreadsheet programs for more complex analysis.

• Custom tailor the L622 species list for your needs.

A

BOUT

T

HIS

M

ANUAL

The Stat-Pak User's Guide is designed to pilot you through the basic features of Stat-Pak, and to introduce you to the advance features.

1 An Introduction to Stat-Pak gives you an overview of the contents of the manual and what Stat-Pak does.

2 Getting Started shows you step-by-step how to install, run, and quit the Stat-Pak software.

3 Downloading Data to the Meter describes the functionality available to custom configure your L622 hand-meter.

4 Uploading Data from the Meter describes how to get your L622 hand-meter data into the Stat-Pak database.


5 Working with the Data tells you how to move and edit data within the Stat-Pak database to generate reports.

6 System Properties tells you how to set the Stat-Pak program settings for easiest viewing, language, and communications port options.

7 Database Functions describes how to import, export, or repair the Stat-Pak data.

8 Language Translator allows you to internationalize the

Stat-Pak language for your application.

Appendix A Species List gives you the Specific Gravity values for the most commonly used species of wood that are used in your L622 hand-meter.

2 G

ETTING

S

TARTED

The Stat-Pak software will operate on any PC compatible with the installation requirements in this section. An available 9pin serial port (COM 1, COM 2, etc…) or a

USB port with the included USB to serial converter installed must be available to communicate with the

L622.

Note: If upgrading Stat-Pak for Windows with a newer version of software please refer to L622 Stat-Pak for

Windows Software Upgrade Procedure located on page 33.

L OADING S TAT -P AK

To install Stat-Pak on your hard drive, simply put the

Stat-Pak disk into the CD drive and the installer program should automatically start. If it does not, locate the file named Setup.exe on the CD drive and double click on it to initiate the installer program.

The installer wizard will lead you through the installation process. Click the Next and Finish buttons to complete the process.

By default the application is installed to "C:\Program

Files\StatPak".

Note:

If the PC does not have the required version of

Internet Explorer, the installer will exit with an error message. A compatible version of Internet Explorer has been provided on the CD for download in the event that the PC does not have the correct version. See the instructions below for loading Internet Explorer.

The last page of the installation wizard may report that your PC will be re-started to complete the installation process. In this case you will not be able to run the software until this is done.

L OADING I NTERNET EXPLORER

If the Stat Pak Installer indicated that the Internet

Explorer version is not compatible, you can load it from the CD as follows:


Open the CD drive directory by double clicking on the

“My Computer” icon. Right mouse click on the CD drive icon and select “Open”. Locate the file folder named

Internet Explorer 6 and double click on it to view the files.

Double click on ie6setup.exe to run the installer program.


The last page of the installation wizard will prompt you to save any open work because the PC will be re-started to complete the installation process.

L622

TO

PC C

ONNECTION

Various function and manager windows require communicating with the L622 hand-meter to retrieve information.

To allow the L622 meter to communicate with the PC computer, the following equipment is provided:

• L622 hand-meter

• Coiled serial cable

• Female 9-pin (DB9F) to RJ11 (i.e. phone jack) adapter (shown below)

• USB to serial converter with driver

• Stat-Pak for Windows software

Follow these steps to establish communications using a

PC Serial port.

• Plug one end of the serial cable into the COMM port of the L622.

• Plug the other end into the 9-pin to RJ11 adapter.

• Plug the 9-pin to RJ11 adapter into the serial port

(COM 1) of your PC computer. If the COM 1 port is not available, use COM 2. If there is no available COM port, and your PC is equipped with a USB port, then use the included USB to serial converter. The USB to serial converter package includes a driver that must be installed prior to use. Please follow the installation instructions included with the converter, before attempting to connect the L622.

• Stat-Pak is configured to communicate through

COM 1 by default. For an alternate COM port, please refer to the System Properties section (6) on how to configure Stat-Pak to recognize an alternate COM port.

CAUTION: The 25-pin to RJ11 adapter will not work on a 25 pin serial port. To work, a DB25F to

DB25F null modem adapter is needed.

Turn on the L622 meter by pressing the

STORE button.


R UNNING S TAT -P AK

To run your L622 Stat-Pak software, left click your Start menu on the Windows Tool Bar (lower left on screen).

Select Programs - Stat Pak – Stat Pak.

L622 group data and species settings will be automatically uploaded to the Stat-Pak program view

(lower panels) upon program launch, which can take up to one minute. If you need to re-upload meter data, you can select View-Refresh from the pull down menu, or use the F5 key.

Q

UITTING

S

TAT

-P

AK

WARNING! Never shut down the computer without performing the following procedure or damage to Stat-

Pak may result. Following, is the procedure for quitting

Stat-Pak.

From the "File" menu, select "Exit", or click on the "X" icon shown at the top right corner of the window.

I NSTALLATION R EQUIREMENTS

The minimum supported PC configurations are as follows:

Windows 2000

Windows XP

Windows 7

R UNNING THE A PPLICATION FOR THE F IRST T IME

When running the program for the first time there is no default language set. This causes a language selection panel to be displayed. The combo box lists all language fields available in the Resource database. Select a language and click OK to continue.

The selected language will be loaded automatically for all future sessions.

To select a language other than English or Swedish, you will need to use the Language Translator. Refer to the

Language Translator section of this manual.


NOTE: When the program is started it attempts to upload data from a meter. If the meter is switched off or disconnected a dialog will appear to this effect. There are two options:



Switch on the meter, wait for it to initialize and then press OK. The program will upload the data and continue.



Press Cancel. The program will continue loading without uploading data. In this case the meter data is not immediately available, but can be accessed later if required.

When the program is run for the first time (and until a new database is created) it should automatically load the default database.

You may re-size the window and panels to suit your screen. Generally the right hand (list view) panels should be as wide as possible to maximize the number of fields visible without scrolling.

D EMONSTRATOR D ATABASE

If the top panels are empty, you must manually open the

‘L6xx’ database. The database demonstrator file is called

‘L6xx.wsp’ and is normally located in the application folder (e.g. C:\Program Files\StatPak).

Click on the file menu and select ‘Open’. Locate the file

‘L6xx.wsp’ and open it. The demonstrator database serves the following purposes:

A demonstration database could be supplied containing sample data.

The user can create a dummy database for training and experimentation purposes.

If data is being gathered in unconnected sites, each site can create a local database with a meaningful file name.

These database files can be collected and combined centrally if required.

In a networked environment the main database can be placed in a shared folder on the server. Any user can open the shared file and work with it.

This functionality is invisible to the casual user. The currently selected database will always load on start-up unless a problem occurs (e.g. someone has move the file or the network is down).

S

PECIAL

E

DITING

K

EYSTROKES

There are several ways to invoke the various editing functions. It is possible to select the required option from the ’File’ menu, by right clicking or dragging the mouse or, in some cases, by pressing buttons on the toolbar.

Editing is always performed in the right hand panels.

When in edit mode (data grid) it is necessary to move the cursor focus away from the current cell (or to press

ENTER) to register the last edit.


NOTE: When editing data using Microsoft DataGrid, it is necessary to press the enter key after changing data, otherwise the data will not be saved after exiting the edit mode.

Right-clicking on a tree node permits actions on the displayed list items (right panel).

Right-clicking on the background of the list view panel will also permit actions on the displayed list items.

Right-clicking on a list view item will permit actions (e.g. deletion) on the selected item only.

List views (right panel) may be sorted by column by clicking the required column header to select it and clicking again to sort. Subsequent clicks reverse the sort order.

The following actions are only available when valid items are selected (or in some cases have the focus):

Add New Item:

Menu

– File – AddNew

Mouse – RightClick – AddNew

Delete Item:

Menu – File – Delete

Mouse – RightClick – Delete

ToolBar

– Delete button “X”

KeyBoard – Delete Key

Edit Item(s):

Menu

– File – Edit

Mouse – RightClick – Edit

ToolBar – Edit button

Cut Item(s):

Menu – Edit – Cut

ToolBar

– Cut button

KeyBoard – Ctrl – X

Copy Item(s):

Menu

– Edit – Copy

ToolBar – Copy button

KeyBoard – Ctrl - C

Paste Item(s):

Menu – Edit – Paste

ToolBar

– Paste button

KeyBoard – Ctrl - V

Select All

Menu

– Edit – Select All

KeyBoard – Ctrl – A

Select Multiple

KeyBoard – Ctrl – LeftClick

Invert Selection

Menu – Edit – Invert Selection


3 D

OWNLOADING

D

ATA

T

O

T

HE

M

ETER

NOTE: The L622 hand-meter has an auto shut off function that will turn meter power off after 60 seconds of inactivity. This may cause a communications error when interfacing with Stat-

Pak. The solution is to turn on the L622 power again, and retry the communication with Stat-Pak.

The Stat-Pak program has a 4-panel layout as shown in the figure below. The upper left panel is the Stat-

Pak Database Directory Tree. Double-Clicking on the folders will reveal the associated Stat-Pak files in the upper left panel.

The lower left panel is the Moisture Meter Directory

Tree. Clicking on the folders will reveal the associated L622 files in the lower right panel.

Data can be moved between the Stat-Pak database to the L622 by dragging and dropping files between the upper and lower panels.

D OWNLOAD M ETER N UMBER TO THE L622

First assign the meter number for the Stat-Pak records.

This number can be arbitrarily assigned by the user to differentiate data from different meters.

500-62202-001 Rev. G

Open the ‘Stat-Pak’ computer icon in the top left window panel (top panel).

Open the ‘Meters’ folder under the ‘Information’

Folder.

Right-click the Meters folder (left hand panel) or right- click the background of the right hand panel.

NOTE: The cursor must be in the white background area to select functions that relate to all files within the current window panel, or have the cursor over the file name to select functions that relate to the file itself.

 Select ‘Add New’.



Rightclick again and select ‘Edit’.



Enter the meter number plus any required comments, then press “Enter”.



Right-click again and de-sele ct ‘Edit’ mode.

Then drag the meter number into the meter by doing the following:



Open the Moisture Meter icon in the lower left window panel.

 Open the ‘Information’ Folder.



Drag the meter from the Stat-Pak view into the

Moisture Meter view.



If the download is successful the meter number appears in the Moisture Meter view.

Note: This operation can also be performed by copying and pasting.

Page 12 of 33 StatPak For Windows User’s Guide

D OWNLOAD C OMPANY N AME TO THE L622

If necessary edit the company name stored in Stat-Pak.

 Open the ‘Information’ folder (top panel)



Right-click the Information folder (left hand panel) or right-click the background of the right hand panel.

 Select ‘Edit’.

 Edit the company name and press “Enter”, using a maximum of 30 characters.



Right-click again and deselect ‘Edit’ mode.



Then drag the company name into the meter.

 Open the Moisture Meter ‘Information’ Folder (lower panel)



Drag the company name from the Stat-Pak view into the Moisture Meter view.



If the download is successful company name appears in the Moisture Meter view.


D OWNLOAD D ATE AND T IME TO THE L622

The computer date and time is shown in the Stat-Pak view. If it is incorrect adjust the time using the Windows

Control Panel.

 Open the ‘Information’ folder (top panel)

500-62202-001 Rev. G

Then drag the date and time into the meter.

 Open the Moisture Meter ‘Information’ Folder (lower panel)



Drag the date and time from the Stat-Pak view into the Moisture Meter view.



If the download is successful the correct date and time appears in the Moisture Meter view.

Note: This operation can also be performed by copying and pasting.

D OWNLOAD S PECIES TO THE L622

The meter can store up to 50 species.

 Open the Moisture Meter ‘Species’ Folder (lower panel)



Delete any unwanted species.

Then select the species from the Stat-Pak records.

 Open the ‘Species’ folder (top panel).



Open the sub folder containing the required species.



Select the species to be downloaded.


Then drag the species into the meter.



Drag the selected species from the Stat-Pak view into the Moisture Meter view white background area.



If the download is successful the species appear in the Moisture Meter view.


4 U

PLOADING

D

ATA

F

ROM

T

HE

M

ETER

L622 group data and species settings will be automatically uploaded to the Stat-Pak program view

(lower panels) upon program launch. If you need to reupload meter data, you can select View-Refresh from the pull down menu, or use the F5 key.

NOTE: The L622 hand-meter has an auto shut off function that will turn meter power off after 60 seconds of inactivity. This may cause a communications error when interfacing with Stat-Pak. The solution is to turn on the

L622 power again, and retry the communication with

Stat-Pak.

NOTE: If the program fails to communicate with the meter and displays an error message “unable to initialize communications port 1”, there may be an improperly terminated version of the program running. Perform a

Ctrl-Alt-Delete to bring up the Window Task Manager and select End Task for the Stat Pak program.

500-62202-001 Rev. G

The Stat-Pak program has a 4-panel layout as shown in the figure below. The upper left panel is the Stat-Pak

Database Directory Tree. Double-Clicking on the folders will reveal the associated Stat-Pak files in the upper left panel.

The lower left panel is the Moisture Meter Directory Tree.

Clicking on the folders will reveal the associated L622 files in the lower right panel.


U PLOAD M EASUREMENT D ATA INTO S TAT -P AK

Create a new ‘Data Set’ folder to contain the meter data.



Open the StatPak ‘Data’ folder (top panel).



Right-click the Data folder (left hand panel) or rightclick the background of the right hand panel.

NOTE: The cursor must be in the white background area to select functions that relate to all files within the current window panel, or have the cursor over the file name to select functions that relate to the file itself.





 Enter a description for the data set and press “Enter”.


Note: The program only supports one level of data set folders. You can’t create a new folder within the data set.

Choose names for the data set folders that are most descriptive (i.e. Days-Fir, or Nights-Cedar).



Add the kiln and supplier reference information as required. These are optional programmable data entry fields and are not required. The supplier reference data field allows entry of up to 9 alphanumeric character values, and can be used to track your lumber supplier shipments if you are using the meter to measure the moisture content of incoming lumber.



The meter number is not editable it is the number of the attached meter.






Open the newly created folder.

Then drag the group data from the meter into the Stat-

Pak folder by doing the following:

 Open the Moisture Meter ‘Data’ folder (lower panel)



Select the groups to be uploaded.



Drag the groups from the Moisture Meter view into the

Stat-Pak folder.



If the upload is successful the groups appear in the folder.


Edit the data by selec ting the right mouse key “edit” function to add location (unit) and reference information.

Both of these data field entries are optional and not a required field.

The location data field allows entry up to 5-digit numeric values. The location field can be used to map your kilns with a Wagner location coordinate (a ZZ, Y, X, axis 3-D format) that is currently being used with the Info-Pak

Plus/Katview software for inline system report generation as shown in the following figure. This allows your kiln drying personnel to know the exact pack location for providing valuable information necessary to adjust the kilns for optimum drying performance.


The unit reference data field allows entry of up to 10 alphanumeric character values. This is a customer programmable data entry field that can be customized to provide additional information for kiln drying or quality control personnel.



Right-click the open Stat-Pak folder (left hand panel) or right-click the background of the right hand panel and select ‘Edit’.

 Enter the location information and press “Enter”.



Enter any reference information.




U PLOAD S PECIES D ATA INTO S TAT -P AK

Create a new ‘Custom’ folder to contain the species data.



Open the StatPak ‘Species’ folder (top panel).



Right-click the Species folder (left hand panel) or right-click the background of the right hand panel.







Enter a description for the custom species folder and press “Enter”.







Or add to an existing ‘Custom’ folder:



Open the Stat-

Pak ‘Species’ folder (top panel).



Open the required custom folder

Then drag the species data from the meter into the

Stat-Pak folder by doing the following:

 Open the Moisture Meter ‘Species’ folder (lower panel)



Select the species to be uploaded. Multiple groups can be moved simultaneously by depressing the control key and left mouse clicking on the required groups.



Drag the species from the Moisture Meter view into



the Stat-Pak folder.



If the upload is successful the species appear s in the folder.


5 W

ORKING WITH THE

D

ATA

The Stat-Pak program has a 4-panel layout as shown in the figure below. The upper left panel is the Stat-Pak

Database Directory Tree. Double-Clicking on the folders will reveal the associated Stat-Pak files in the upper left panel.

The lower left panel is the Moisture Meter Directory Tree.

Clicking on the folders will reveal the associated L622 files in the lower right panel.



C USTOM S PECIES F OLDERS

New ‘Custom’ folders may be added (and named) as required.



Open the Stat-




Right-click the Species folder (left hand panel) or right-click the background of the right hand panel.







Enter a description for the custom species folder and press “Enter”.




500-62202-001 Rev. G

The contents of custom folders are editable.

The contents of standard species folders are NOT editable.

Note: The program only supports one level of data set folders. You can’t create a new folder within the data set.

Choose names for the data set folders that are most descriptive (i.e. Days-Fir, or Nights-Cedar).

Species data may be copied (or dragged) between folders as required.

NOTE: Data dragged into a folder will appear at the end of the file list until the information is resorted by reopening the window.

E DITING S PECIES D ATA

To add a new species data folder



Open the Stat-







Right-click the folder (left hand panel) or right-click the background of the right hand panel.

NOTE: The cursor must be in the white background area to select functions that relate to all files within the current window panel, or have the cursor over the file name to select functions that relate to the file itself.



To edit species data:



Open the StatPak ‘Species’ folder (top panel).






Right-click the folder (left hand panel) or right-click the ba ckground of the right hand panel and select ‘Edit’.



Edit the description or specific gravity and press

“Enter”.




Note: The Stat Pak program does not allow you to delete species data stored in the meter. This operation must be performed via the L622 hand-meter internal menu by selecting the “Clear” function as described in the L622 manual.

D ATA S ETS

Creating Data Sets is covered in the section “Upload

Measurement Data into Stat-

Pak”

Selecting a ‘Data Set’ folder displays all groups contained within.

Selecting a group displays the individual group readings.

Note: Sorting data by kiln, supplier or meter will also perform a secondary sort by date. Clicking on the window panel header can perform the sort.

Note: It is also possible to set a date range to limit the displayed data –see the System Properties section.


C REATING S UMMARY R EPORTS

Creating a new ‘Summary Report’ folder to contain custom collections of group data sets.



Open the Stat-

Pak ‘Summary Report’ folder (top panel).



Right-click the Summary Report folder (left hand panel) or right-click the background of the right hand panel.







Enter a description for the summary and modify the date if requ ired, and press “Enter”.







A DDING G ROUPS TO A S UMMARY



Open the StatPak ‘Data’ folder (top panel).

 Open the required ‘Data Set’ folder.



Copy the required groups



Return to the Summary Report



Paste the groups into the summary**



If the paste is successful the groups appear in the folder.

Repeat from other data sets as required.

** This operation can also be performed by dragging group data from a list view (right panel) and dropping onto a report summary node (left panel).

Note: It is possible to set a date range to limit the displayed data -see the System Properties section.

To view or print a Group Summary Report right click the

‘data set’ folder within the summary folder and select

‘View/Print’.

V IEWING R EPORTS

To view or print a Group Report right click the group and select ‘View/Print’.

To view or print a Readings Report right click the group and select ‘View/Print Readings’.

To view or print a Group Summary Report right click the

‘data set’ folder within the summary folder and select

‘View/Print’.


P RINTING R EPORTS

Printing can be initiated by selecting ‘View/Print’ from the file menu, clicking the ‘Print’ button, by right-clicking the mouse and selecting View/Print’ from the pop-up menu or by pressing the ‘Print’ button on the toolbar.

A print window is always presented first, giving the option to print if required.

The type of report displayed depends on the node or item currently selected.

The report may either be printed or exported to an HTML, or text file.

In addition to printing from the Stat-Pak, Group Reports and Readings Reports may also be viewed or printed directly from the meter by right-clicking a group in the

Moisture Meter view (lower panel).


6 S

YSTEM

P

ROPERTIES

There are two properties views dependent upon the current selection. Clicking the database icon on the tool bar shown or in any blank area inside a left panel and selecting ‘Properties’ will invoke the ‘File Information’ properties view. Clicking any other area will invoke the main system properties view.

D ATES T AB

Setting Date Ranges

Allows (optional) selection of start and end dates for display and printing.

Any dates set up here will be used for all subsequent date related database queries. The sort is based on the data folder start date. This field is set by the first data reading value contained within the folder.

To define a start date

, check the ‘From’ box and select a date.

To define an end date

, check the ‘To’ box and select a date.

Clicking ‘OK’ will limit displayed information in the upper right side panel in the Stat-

Pak “Data” and “Summary

Repor ts” folders to the dates set.

To use these dates as default values in future, simply check the ‘Set as Default’ box and click ‘OK’

Editing of Data Set 'Start Date' is not possible.

The Data Set creation date is stored internally but is not used or shown to the user

The Summary Reports include an additional calculated

'Start Date' field determined by the earliest group start date referenced within it.

Editing of Summary Report 'Start Date' is not allowed.

Summary Reports are now filtered by the calculated start date.

S

ETTINGS

T

AB

Field Widths : If the ‘Use System Defaults’ option is unchecked then any adjustments made to field widths will be retained between sessions.


Width adjustments can be made by left mouse clicking on the separator bar between the fields and dragging the bar in the desired direction. For width adjustments to be saved, they must be made in non-edit mode. The change is recorded when the list view is changed or refreshed.

C OMMUNICATIONS P ORT

The combo box lists available ports detected by the

L622Interface DLL. Selecting a number sets the comm. port to be used.

If the COM port number is not listed, as may be the case if using the USB to serial converter, the port number can be typed directly into the edit field. Be aware though, that the COM port may not be listed, because it may be in use by another program on your computer.

L ANGUAGE T AB

The language combo box lists available languages found in the resource database. If an alternative language is selected the program must be closed and re-started for the change to take effect.

7 D

ATABASE

F

UNCTIONS

O

PEN A

N

EW

D

ATABASE

From the ‘Tools’ menu select ‘Database Utilities’ then

‘Create New Database’

Enter the required name and path for the new database and click ‘Save’.

If the database is to be shared across a network then place the database file on an appropriate shared drive.

The most recently used database files are listed under the 'File' menu, this makes it a simple matter to switch between two or three different databases.


C OMPACTING THE D ATABASE

From the ‘Tools’ menu select ‘Database Utilities’ then

‘Compact Database’

If you delete entries, your database can become fragmented and use disk space inefficiently. Compacting the database removes dead space and rearranges how the database file is stored on disk.

I MPORT /E XPORT F UNCTIONS

Export Species Information to Stat-Pak Species File

(*.spc)



Right-click the species folder to be exported.

 Select the ‘Export – Selected Data to Backup File’ menu option.

 The ‘Open File’ dialog is invoked.



The offered filename is the species folder name, accept or edit it and click OK.



The selected species will be copied to the file.

Note:

Default folders are saved with a “_” prefix appended to the filename. If the prefix is removed the records will be imported as custom data (i.e. the folder will lose its default status).

Import Species Information from Stat-Pak Species

File (*.spc)

 Select the ‘File – Import - Species’ menu option.




Select a species file (*.spc) and open it.



The species data will be imported to a folder where the folder name is the filename. If the folder already exists, it will be overwritten, otherwise it will be created.



If the filename is the same as one of the default

(non-custom) folders this data will also be overwritten. This is the only means of modifying default data.

Note: To import species into a (new or existing) default folder simply ensure that the filename begins with an underscore character.

Export Selected Data to Stat-Pak Backup File (*.spb)



Right-click the data set to be exported.

 Select the ‘Export – Selected Data Set to Backup

File’ menu option.




The offered filename is the data set description, accept or edit it and click OK.



The selected data set will be copied to the file.

Note: Multiple data set selections are not allowed.


Export Data by Date Range to Stat-Pak Backup File

(*.spb)

 Set the date range from the ‘Properties’ panel



Right-click the \Data folder.





The offered filename is the date range in the format mmddyy_mmddyy.spb, accept or edit it and click OK.




Import Data from Stat-Pak Backup File (*.spb)

 Select the ‘File – Import – Data’ menu option.




Select the required data backup file (*.spb) and open it.



The data set(s) will be imported.

If the Description, Start Date and Meter Number match an existing data set the data will be overwritten, otherwise a new entry will be added.

If data is added but the description matches an existing entry a sequential number will be appended.

Export Selected Report Summary to Stat-Pak Report

Backup File (*.spr)



Right-click the report summary to be exported.


500-62202-001 Rev. G Page 24 of 33




The offered filename is the summary description, accept or edit it and click OK.




Note: Multiple report summary selections are not allowed.

Export Report Summaries by Date Range to Stat-Pak

Report Backup File (*.spr)

 Set the date range from the ‘Properties’ panel



Right-click the \Summary Reports folder.



Select the

‘Export – Selected Data to Backup File’ menu option.




The offered filename is the date range in the format mmddyy_mmddyy.spr, accept or edit it and click OK.




Import Report Summaries from Stat-Pak Report

Backup File (*.spr)

 Select the ‘File – Import – Summaries’ menu option.




Select the required report backup file (*.spr) and open it.



The data set(s) will be imported.



If the Description, Start Date and Meter Number matches an existing data set the data will be overwritten, otherwise a new entry will be added.




If data is added but the description matches an existing entry a sequential number will be appended.

If the Description, Kiln and Pull Date match an existing report summary the report will be overwritten, otherwise a new entry will be added.

If a report is added but the description matches an existing entry a sequential number will be appended.

Report backup files include the related data set and group information these data are imported using the same criteria as the ‘Import Data’ function.

Export Readings Data in Tab Delimited Text format

(*.txt)



Right-click the data set or report summary to be exported.

 Select the ‘Export – Readings Report (Text

Format)’ menu option.




The offered filename is the report or data set description followed by “_readings”, accept or edit it and click OK.




Note: Multiple selections are not allowed.

Note: The ‘readings’ suffix is obtained from the resource file and is therefore translatable.

500-62202-001 Rev. G

Export Group Data in Tab Delimited Text format (*.txt)



Right-click the data set or report summary to be exported.



Select the ‘Export – Group Report (Text Format)’ menu option.




The offered filename is the report or data set description followed by “_group”, accept or edit it and click OK.




Note: Multiple selections are not allowed.

Note: The ‘group’ suffix is obtained from the resource file and is therefore translatable.

Export Charge Data (*.chg)



Right-click the report summary to be exported.

 Select the ‘Export – Charge Data’ menu option.




The offered filename is the report or data set description, accept or edit it and click OK.




8 L

ANGUAGE

T

RANSLATOR

Internationalization of the Stat-Pak program is accomplished using a language database. The appropriate text strings are loaded from the database at run time.


During program development, code added to each form automatically extracts all text strings and generates an initial database (in English).

This document relates to the Wagner W32 L622 Stat-Pak

Resource Editor Utility. It describes the process for generating and editing new language strings in a Stat-

Pak resources database.

The Stat-Pak resources database (Resources.wsr) is loaded as part of the Stat-Pak installation, so this will need to be present on the computer before the utility can be used.

I NSTALLATION R EQUIREMENTS

The minimum supported configurations are as follows:

Windows 2000

Windows XP

Windows 7

To install Stat-Pak Translator on your hard drive, right mouse click on the Stat-Pak disk in the CD drive, and select “open”. Locate the file named T_Setup.exe on the

CD drive and double click on it to initiate the installer program.


500-62202-001 Rev. G

By default the application is installed to "C:\Program

Files\StatPak Translator".

Note: If the PC does not have the required version of

Internet Explorer, the installer will exit with an error message. A compatible version of Internet Explorer has been provided on the CD for download in the event that the PC does not have the correct version.

The last page of the installation wizard may report that your PC will be re-started to complete the installation process. In this case you will not be able to run the software until this is done.

O PENING A R ESOURCE F ILE

When the program is run for the first time (and until a file is opened) no resource file will be loaded. To open a resource file select ‘Open’ from the ‘File’ menu and locate the required file (e.g. "C:\Program Files\

StatPak\Resources.wsr").

The selected file will be loaded by default in future sessions.

S

OURCE

L

ANGUAGE

This is the language you wish to translate.

By default the source language is English, any available language may be selected.


T RANSLATION L ANGUAGE

This is the language you wish to translate into.

By default the translation language is English.

Any available language may be selected.

T o add a new language select ‘Add New Language’ from the ‘Edit’ Menu, then enter the required language name and click ‘OK’. The new language will be added to the file and will appear in the Translation Combo box.

Note: The Language name cannot be altered once it has been created, so it is important to ensure that it is correctly spelled before continuing.

A DDING OR E DITING T EXT

Source text is displayed in a scrollable list on the left side o f the form and translation text (if ‘source’ and

‘translation’ are different) is displayed on the right.

When a row is selected the text is reproduced in the

‘source’ and ‘translation’ text boxes at the top of the form.

These text boxes reflect the font and size used in the source program. The size of the text box reflects the space available for the text (when specified).

Text may be entered either in the translation text box or directly in the translation column.

D

ESCRIPTION

P

ANEL

This panel displays descriptions, context information or other notes associated with the selected text. This is information that has been added to the source code by the application programmer.

I

NFORMATION

P

ANEL

This panel displays general information about the object that uses the text. The information includes the object type and name, and the form name on which the object is used.

S EARCH F EATURE

To search for a specific word or phrase do the following:

 Select the ‘Find’ menu option.



Click on the column to be searched (source or translation) to select it.

 Enter the search string in the ‘Find’ text box.

 Press the ‘Find’ Button

The data will be filtered to show only rows containing the search string.

Note: The search feature is always active; the menu option merely makes it visible. To remove the search filter delete all text from the ‘Find’ text box.


S TATUS B AR I NFORMATION

The status bar at the bottom of the form shows the following information:

 ‘Form’ – The name of the form on which the text appears.

 ‘Type’ – The name of the object that uses the text.

 ‘Name’ – The name of the object.

 ‘Index’ – The object index (where applicable). For some objects, such as Toolbars and Tabstrips the index denotes the tab or button index.

 ‘Font’ – The font name.

 ‘Size – The font size.

 ‘Records’ – The number of text items. If a search filter is applied, this number shows the number of text items containing the search string.


A

PPENDIX

A

S PECIES L IST

These are the contents of the factory set species folders.

Default .SPC

Spec. Gravity: Default Species:

0.41 . . . . . . . . . . . . . . . . . Alder, Red

0.47 . . . . . . . . . . . . . . . . . Cedar, Eastern Red Cedar

0.32 . . . . . . . . . . . . . . . . . Cedar, Western Red Cedar

0.50 . . . . . . . . . . . . . . . . . Cherry, Black

0.48 . . . . . . . . . . . . . . . . . Douglas Fir

0.35 . . . . . . . . . . . . . . . . . Fir, Balsam

0.38 . . . . . . . . . . . . . . . . . Fir, California Red

0.32 . . . . . . . . . . . . . . . . . Fir, Subalpine

0.39 . . . . . . . . . . . . . . . . . Fir, White

0.40 . . . . . . . . . . . . . . . . . Hemlock, Eastern

0.45 . . . . . . . . . . . . . . . . . Hemlock, Western

0.60 . . . . . . . . . . . . . . . . . Hickory (Pecan), Nutmeg

0.66 . . . . . . . . . . . . . . . . . Hickory, Pecan

0.72 . . . . . . . . . . . . . . . . . Hickory (True), Mockernut

0.52 . . . . . . . . . . . . . . . . . Larch, Western

0.63 . . . . . . . . . . . . . . . . . Maple, Sugar

0.63 . . . . . . . . . . . . . . . . . Oak (Red), Northern Red

0.59 . . . . . . . . . . . . . . . . . Oak (Red), Southern Red

0.68 . . . . . . . . . . . . . . . . . Oak, White

0.35 . . . . . . . . . . . . . . . . . Pine, Eastern White

0.43 . . . . . . . . . . . . . . . . . Pine, Jack

0.51 . . . . . . . . . . . . . . . . . Pine, Loblolly

0.41 . . . . . . . . . . . . . . . . . Pine, Lodgepole

0.59 . . . . . . . . . . . . . . . . . Pine, Longleaf

0.40 . . . . . . . . . . . . . . . . . Pine, Ponderosa

0.51 . . . . . . . . . . . . . . . . . Pine, Shortleaf

0.59 . . . . . . . . . . . . . . . . . Pine, Slash

Spec. Gravity: Default Species:

0.36 . . . . . . . . . . . . . . . . . Pine, Sugar

0.42 . . . . . . . . . . . . . . . . . Yellow-Poplar

0.40 . . . . . . . . . . . . . . . . . Redwood, Old-Growth

0.56 . . . . . . . . . . . . . . . . . SYP (Southern Yellow Pine)

0.50 . . . . . . . . . . . . . . . . . Custom Species

Hardwood.SPC

Spec. Gravity: Hardwood Species:

0.41 . . . . . . . . . . . . . . . . . Alder, Red

0.49 . . . . . . . . . . . . . . . . . Ash, Black

0.58 . . . . . . . . . . . . . . . . . Ash, Blue

0.56 . . . . . . . . . . . . . . . . . Ash, Green

0.55 . . . . . . . . . . . . . . . . . Ash, Oregon

0.55 . . . . . . . . . . . . . . . . . Ash, Red

0.60 . . . . . . . . . . . . . . . . . Ash, White

0.39 . . . . . . . . . . . . . . . . . Aspen, Bigtooth

0.38 . . . . . . . . . . . . . . . . . Aspen, Quaking

0.37 . . . . . . . . . . . . . . . . . Basswood, American

0.64 . . . . . . . . . . . . . . . . . Beech, American

0.55 . . . . . . . . . . . . . . . . . Birch, Paper

0.65 . . . . . . . . . . . . . . . . . Birch, Sweet

0.53 . . . . . . . . . . . . . . . . . Birch, White

0.62 . . . . . . . . . . . . . . . . . Birch, Yellow

0.38 . . . . . . . . . . . . . . . . . Butternut

0.50 . . . . . . . . . . . . . . . . . Cherry, Black

0.43 . . . . . . . . . . . . . . . . . Chestnut, American

0.34 . . . . . . . . . . . . . . . . . Cottonwood, Balsam Poplar

0.35 . . . . . . . . . . . . . . . . . Cottonwood, Black

0.40 . . . . . . . . . . . . . . . . . .Cottonwood, Eastern

0.72 . . . . . . . . . . . . . . . . . Dogwood, Flowering



0.50 . . . . . . . . . . . . . . . . . Elm, American

0.63 . . . . . . . . . . . . . . . . . Elm, Rock

0.53 . . . . . . . . . . . . . . . . . Elm, Slippery

0.53 . . . . . . . . . . . . . . . . . Hackberry

0.66 . . . . . . . . . . . . . . . . . Hickory (Pecan), Bitternut

0.60 . . . . . . . . . . . . . . . . . Hickory (Pecan), Nutmeg

0.66 . . . . . . . . . . . . . . . . . Hickory, Pecan

0.62 . . . . . . . . . . . . . . . . . Hickory (Pecan), Water

0.72 . . . . . . . . . . . . . . . . . Hickory (True), Mockernut

0.75 . . . . . . . . . . . . . . . . . Hickory (True), Pignut

0.72 . . . . . . . . . . . . . . . . . Hickory (True), Shagbark

0.69 . . . . . . . . . . . . . . . . . Hickory (True), Shellbark

0.55 . . . . . . . . . . . . . . . . . Holly, American

0.70 . . . . . . . . . . . . . . . . . Hophornbeam, Eastern

0.55 . . . . . . . . . . . . . . . . . Laurel, California

0.69 . . . . . . . . . . . . . . . . . Locust, Black

0.64 . . . . . . . . . . . . . . . . . Madrone, Pacific

0.50 . . . . . . . . . . . . . . . . . Magnolia, Southern

0.48 . . . . . . . . . . . . . . . . . Maple, Bigleaf

0.57 . . . . . . . . . . . . . . . . . Maple, Black

0.60 . . . . . . . . . . . . . . . . . Maple, Hard

0.54 . . . . . . . . . . . . . . . . . Maple, Red

0.47 . . . . . . . . . . . . . . . . . Maple, Silver

0.51 . . . . . . . . . . . . . . . . . Maple, Soft

0.63 . . . . . . . . . . . . . . . . . Maple, Sugar

0.61 . . . . . . . . . . . . . . . . . Oak (Red), Black

0.53 . . . . . . . . . . . . . . . . . Oak, California Black

0.68 . . . . . . . . . . . . . . . . . Oak (Red), Cherrybark

0.63 . . . . . . . . . . . . . . . . . Oak (Red), Laurel

0.63 . . . . . . . . . . . . . . . . . Oak (Red), Northern Red

0.63 . . . . . . . . . . . . . . . . . Oak (Red), Pin

0.67 . . . . . . . . . . . . . . . . . Oak (Red), Scarlet

0.59 . . . . . . . . . . . . . . . . . Oak (Red), Southern Red

0.63 . . . . . . . . . . . . . . . . . Oak (Red), Water

0.69 . . . . . . . . . . . . . . . . . Oak (Red), Willow

0.64 . . . . . . . . . . . . . . . . . Oak (White), Bur

0.66 . . . . . . . . . . . . . . . . . Oak (White), Chestnut

0.63 . . . . . . . . . . . . . . . . . Oak (White), Overcup

0.67 . . . . . . . . . . . . . . . . . Oak (White), Post

500-62202-001 Rev. G


0.67 . . . . . . . . . . . . . . . . . Oak (White), Swamp Chestnut

0.72 . . . . . . . . . . . . . . . . . Oak (White), Swamp White

0.68 . . . . . . . . . . . . . . . . . Oak, White

0.71 . . . . . . . . . . . . . . . . . Persimmon, Common

0.46 . . . . . . . . . . . . . . . . . Sassafras

0.52 . . . . . . . . . . . . . . . . . Sweetgum

0.49 . . . . . . . . . . . . . . . . . Sycamore, American

0.64 . . . . . . . . . . . . . . . . . Tanoak

0.50 . . . . . . . . . . . . . . . . . Tupelo, Black

0.50 . . . . . . . . . . . . . . . . . Tupelo, Water

0.55 . . . . . . . . . . . . . . . . . Walnut, Black

0.39 . . . . . . . . . . . . . . . . . Willow, Black

0.42 . . . . . . . . . . . . . . . . . Yellow-Poplar

Softwood Species

Spec. Gravity: Softwood Species:

0.46 . . . . . . . . . . . . . . . . . Baldcypress

0.44 . . . . . . . . . . . . . . . . . Cedar, Alaska

0.32 . . . . . . . . . . . . . . . . . Cedar, Atlantic White

0.47 . . . . . . . . . . . . . . . . . Cedar, Eastern Red Cedar

0.37 . . . . . . . . . . . . . . . . . Cedar, Incense

0.31 . . . . . . . . . . . . . . . . . Cedar, Northern White

0.43 . . . . . . . . . . . . . . . . . Cedar, Port Orford

0.32 . . . . . . . . . . . . . . . . . Cedar, Western Red Cedar

0.44 . . . . . . . . . . . . . . . . . Cedar, Yellow

0.48 . . . . . . . . . . . . . . . . . Douglas Fir

0.35 . . . . . . . . . . . . . . . . . Fir, Balsam

0.38 . . . . . . . . . . . . . . . . . Fir, California Red

0.37 . . . . . . . . . . . . . . . . . Fir, Grand

0.39 . . . . . . . . . . . . . . . . . Fir, Noble

0.43 . . . . . . . . . . . . . . . . . Fir, Pacific Silver

0.32 . . . . . . . . . . . . . . . . . Fir, Subalpine

0.39 . . . . . . . . . . . . . . . . . Fir, White

0.40 . . . . . . . . . . . . . . . . . Hemlock, Eastern

0.45 . . . . . . . . . . . . . . . . . Hemlock, Mountain

0.45 . . . . . . . . . . . . . . . . . Hemlock, Western

0.52 . . . . . . . . . . . . . . . . . Larch, Western


Spec. Gravity: Softwood Species:

0.35 . . . . . . . . . . . . . . . . . Pine, Eastern White

0.43 . . . . . . . . . . . . . . . . . Pine, Jack

0.51 . . . . . . . . . . . . . . . . . Pine, Loblolly

0.41 . . . . . . . . . . . . . . . . . Pine, Lodgepole

0.59 . . . . . . . . . . . . . . . . . Pine, Longleaf

0.52 . . . . . . . . . . . . . . . . . Pine, Pitch

0.56 . . . . . . . . . . . . . . . . . Pine, Pond

0.40 . . . . . . . . . . . . . . . . . Pine, Ponderosa

0.46 . . . . . . . . . . . . . . . . . Pine, Red

0.48 . . . . . . . . . . . . . . . . . Pine, Sand

0.51 . . . . . . . . . . . . . . . . . Pine, Shortleaf

0.59 . . . . . . . . . . . . . . . . . Pine, Slash

0.45 . . . . . . . . . . . . . . . . . Pine, Spruce

0.36 . . . . . . . . . . . . . . . . . Pine, Sugar

0.48 . . . . . . . . . . . . . . . . . Pine, Virginia

0.35 . . . . . . . . . . . . . . . . . Pine, Western White

0.40 . . . . . . . . . . . . . . . . . Redwood, Old-Growth

0.35 . . . . . . . . . . . . . . . . . Redwood, Young-Growth

0.42 . . . . . . . . . . . . . . . . . Spruce, Black

0.35 . . . . . . . . . . . . . . . . . Spruce, Engelmann

0.40 . . . . . . . . . . . . . . . . . Spruce, Red

0.40 . . . . . . . . . . . . . . . . . Spruce, Sitka

0.36 . . . . . . . . . . . . . . . . . Spruce, White

0.56 . . . . . . . . . . . . . . . . . SYP (Southern Yellow Pine)

0.53 . . . . . . . . . . . . . . . . . Tamarack

Imported Species

Spec. Gravity: Imported Species:

0.65 . . . . . . . . . . . . . . . . . Afrormosia

0.57 . . . . . . . . . . . . . . . . . Andiroba

0.51 . . . . . . . . . . . . . . . . . Avodire

0.45 . . . . . . . . . . . . . . . . . Banak (Virola spp.)

Spec. Gravity: Imported Species:

0.70 . . . . . . . . . . . . . . . . . Benge (Guibourtia arnoldiana)

0.42 . . . . . . . . . . . . . . . . . Cativo

0.72 . . . . . . . . . . . . . . . . . Degame

0.55 . . . . . . . . . . . . . . . . . Determa

0.40 . . . . . . . . . . . . . . . . . Hura

0.57 . . . . . . . . . . . . . . . . . Iroko

0.75 . . . . . . . . . . . . . . . . . Jarrah

0.38 . . . . . . . . . . . . . . . . . Jelutong

0.70 . . . . . . . . . . . . . . . . . Kapur

0.76 . . . . . . . . . . . . . . . . . Keruing (Dipterocarpus spp.)

0.40 . . . . . . . . . . . . . . . . . Limba

0.44 . . . . . . . . . . . . . . . . . Mahogany, African

0.47 . . . . . . . . . . . . . . . . . Mahogany, True

0.63 . . . . . . . . . . . . . . . . . Manni

0.67 . . . . . . . . . . . . . . . . . Merbau

0.54 . . . . . . . . . . . . . . . . . Mersawa

0.32 . . . . . . . . . . . . . . . . . Obeche

0.35 . . . . . . . . . . . . . . . . . Okoume

0.68 . . . . . . . . . . . . . . . . . Opepe

0.49 . . . . . . . . . . . . . . . . . Parana Pine

0.66 . . . . . . . . . . . . . . . . . Peroba de campos

0.71 . . . . . . . . . . . . . . . . . Peroba rosa

0.42 . . . . . . . . . . . . . . . . . Primavera

0.71 . . . . . . . . . . . . . . . . . Purpleheart

0.45 . . . . . . . . . . . . . . . . . Radiata Pine

0.56 . . . . . . . . . . . . . . . . . Ramin

0.55 . . . . . . . . . . . . . . . . . Roble (Tabebuia spp.,Robble group)

0.84 . . . . . . . . . . . . . . . . . Rosewood, Brazilian (Dalbergia nigra)

0.79 . . . . . . . . . . . . . . . . . Rosewood, Indian

0.60 . . . . . . . . . . . . . . . . . Sapele

0.44 . . . . . . . . . . . . . . . . . Spanish Cedar

0.57 . . . . . . . . . . . . . . . . . Teak


A

PPENDIX

B

G LOSSARY

Communications Port – Serial computer port used to interface with the meter.

Data Set – Files that have been uploaded from the handmeter that contain data. Data set files reside in the folder

“Stat-Pak\Data”.

Export – Saves data from Stat-Pak to a file.

Group Report – A report generated from a set of readings from the hand-meter shown with a bar graph.

Import – Retrieves data from a file to Stat-Pak.

Language Translator

– Allows the user to convert the program for their language, i.e. English to Spanish.

Measurement Data – Data recorded in the hand-meter.

Meter Number – A number stored in the hand-meter to identify it from other meters.

Readings Report – A report generated from a set of readings from the hand-meter shown with individual readings in numeric form.

500-62202-001 Rev. G

Species – The type of wood, i.e. Douglas Fir.

Species Data

– Specific Gravity settings that the handmeter uses to compensate for the type of wood.

Summary Report

– A bar graph report generated from multiple groups of group data.

Tool Bar – A bar located at the top of the Stat-Pak window that allows for user functions.

Page 32 of 33 Stat-Pak For Windows User’s Guide

Wagner Meters

326 Pine Grove Road

Rogue River, OR 97537

Phone: (541) 582-0541

Fax: (541) 582-4138

L622 S TAT -P AK F OR W INDOWS S OFTWARE U PGRADE

P ROCEDURE

You will need to perform the following procedure to upgrade your existing software (if an earlier version of Stat-

Pak for Windows is already installed on your system):

Note: Uninstalling Stat-Pak removes all database files.

Make sure to backup current information with the following procedure.

Backing up your data:

1. To back up current board data, right click on the Data folder, select Export -> Selected Data to Backup File. Save the file somewhere easy to find later. Be sure not to save the file in the folder where the current application is located, as it may be deleted when uninstalling the old software version!

2. To backup summary reports, right click on Summary

Reports folder, select Export -> Selected Data to Backup

File. Save the file somewhere easy to find later.

3. To backup your custom species list, open up the Species folder and right click on the Custom folder, select Export ->

Selected Data to Backup File. Save the file somewhere easy to find later. Close Wagner Stat-Pak.

Updating Stat-Pak:

1. Go to Start menu -> Settings -> Control Panel ->

Add/Remove Programs. Select Stat-Pak out of the list and click remove.

2. Now re-install Stat-Pak from your new CD.

Bringing your data back into Stat-Pak:

1. In Stat-Pak, click on file -> Import -> Data. Find and open the file you saved earlier.

2. Click on file -> Import -> Summaries. Find and open the file you saved earlier.

3. Click on file -> Import -> Species. Find and open the file you saved earlier.


Wagner L622 STAT-PAK Moisture Analyzer User’s Guide

Assistant Bot

AGNER

ODEL

OR

INDOWS

SER

’

S

UIDE

Wagner Meters

ABLE OF

ONTENTS

N

NTRODUCTION TO

TAT

AK FOR

INDOWS

ETTING

TARTED

Note:

OWNLOADING

ATA

O

HE

ETER

PLOADING

ATA

ROM

HE

ETER

ORKING WITH THE

ATA

YSTEM

ROPERTIES

ATABASE

UNCTIONS

ANGUAGE

RANSLATOR

PPENDIX

PPENDIX

Wagner Meters

Key Features

Frequently Answers and Questions

What can I use the L622 STAT-PAK for?

How do I download data to the L622?

How do I upload data from the L622?

Related manuals

Shop-Vac

AC235A

WAGNER

L622 Digital Recording

WAGNER

L622 Digital Recording

WAGNER

MMC 220

Bessemeter

DS500

WAGNER

L607 Dual Depth

WAGNER

MMI 1100

Wagner Electronics

L610

WAGNER

L620 Digital Recording

WAGNER

BI 2200

WAGNER

BI 2200

WAGNER

L620 Digital Recording

Table of contents