ZLP-1, ZLP-2, ZLP-4 Installation Instructions

ZLP-1, ZLP-2, ZLP-4 Installation Instructions
Securitron Magnalock Corp.
Tel 800.624.5625
www.securitron.com
[email protected]
ASSA ABLOY, the global leader
in door opening solutions
ZONE LIGHT PANEL INSTRUCTIONS: MODELS ZLP-1, ZLP-2, ZLP-4
The zone light panel comes with pairs of LED’s (red and green). It is used to annunciate conditions in a
security equipment installation.
The LED’s operate on 24VDC as the unit is delivered. Connect +24v to the yellow wire of each LED
and negative to the black wire. For 12VDC operation, note that the yellow wire of each LED carries a
resistor mounted in line. Cut away and discard the resistor and the LED will operate on 12VDC.
© Copyright, 2011, all rights reserved
Page 1
Rev. C, 04/11
PN# 500-16800
Rev. C, 04/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement