4.5PBM_manual
Atlantic Technology
®
I
N N O V A T I V E
H
O M E
T
H E A T E R
343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnolgy.com
Instruction Manual
Model 4.5 PBM
High Performance Powered Subwoofer
Model 4.5 PBM
MODEL 4.5 PBM
High Performance Powered Subwoofer
Congratulations on your purchase of an Atlantic Technology 4.5 PBM powered subwoofer. With proper
care, your new subwoofer will provide many years of trouble-free, high quality bass reproduction.
The 4.5 PBM is capable of delivering very high output levels and a
wide dynamic range with smooth in-room response down to
approximately 30 Hz, with a peak SPL of 105dB.
The built-in proprietary high-current Class G amplifier is
conservatively rated at 150 watts RMS. This amplifier, coupled
with the massive 10" long-throw woofer in a sealed, acoustic
suspension enclosure, generates musical, accurate deep bass with
a minimum of distortion.
Your Atlantic Technology powered subwoofer will smoothly
integrate with virtually all other brands of loudspeakers on the
market. All of its internal electronics have been designed to
maintain optimal signal integrity. From the premium quality
gold-plated connectors to the clearly marked controls, this is one
of the most versatile high performance subwoofers you can buy.
An added benefit is its unusually compact size and elegant design.
Features
Your Atlantic Technology 4.5 PBM powered subwoofer was engineered using the latest technology and
finest components available. It features:
●
A long-throw 10" driver with a vented motor structure and 2" high temperature voice coil.
This powerful driver has a very stiff non-resonant cone that acts as a perfect piston throughout
its operating range. Its massive motor assembly and high temperature components mean high
performance and exceptional reliability.
●
A sealed acoustic suspension enclosure for low distortion and deep bass output.
Acoustic suspension designs are inherently low in distortion and naturally deliver deep, smooth
bass response. As with all Atlantic Technology subwoofers, we have paid inordinate attention to
giving you accurate musical bass reproduction along with terrific special effects.
●
A linear power high current discrete Class G amplifier conservatively rated at 150 watts RMS.
Atlantic Technology’s advanced Class G amplifiers utilize dual low voltage/high voltage power
supplies for exceptional power delivery from a compact, efficient package. One power supply
operates during all “normal” demand periods. But when a high demand peak signal appears at
the subwoofer input, the second, high voltage supply immediately switches in to dramatically
boost the amplifier’s low distortion output capability. The amplifier delivers very high power
levels from a compact and efficient package. It consumes less steady-state power and produces
much less heat than standard amplifier designs for longer more reliable operation. The 4.5 PBM’s
custom designed amplifier has been precision matched to the 10" driver. It exerts accurate and
powerful control over the driver for the best performance possible.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Atlantic Technology
®
●
A useful working frequency range from 30 Hz to 150Hz.
●
A Dual Diversity CrossoverTM (DDC) system with an adjustable (50 Hz to 150 Hz) 12 dB per
octave low-pass crossover, and a fixed 24 dB per octave “voice filter” at 180 Hz.
This unique crossover’s upper end roll-off slope is an extremely steep 12 dB + 24 dB per octave,
totaling 36 dB per octave above 180 Hz. It allows for exceptional integration with most any
brand or type of speaker on the market. We have developed this unusual design to eliminate any
possibility of out-of-band information being audible from the subwoofer and thereby making it
localizable.
The DDC filter is incorporated in the 4.5 PBM because this subwoofer has been design matched
to the Atlantic Technology 4.5 ultra-compact Home Theater speaker system. If you are using the
subwoofer with very small satellites (like the 4.5 L /C/ R units) which have limited mid-bass
output you have to cross over the subwoofer at a fairly high frequency. Since the 4.5 Left / Right
/ Center speakers are specifically designed to eliminate all frequencies below 125 Hz, their mating
subwoofer must reproduce these sounds. However, it’s critically important that all sounds above
this frequency be eliminated from the subwoofer, in order to make for perfect system integration.
This is because higher frequencies are your ears’ clues to where sound comes from. The
innovative DDC 36 dB crossover in the 4.5 PBM ensures precise and seamless system integration
with compact satellite speakers. A subsonic filter is also incorporated to filter out inaudible ultralow frequencies that can rob amplifier power.
●
Two line inputs, two line thruputs.
The thruputs allow daisy chaining of multiple subwoofers, or can act as a return path back to the
processor.
●
Two high level inputs, two high level thruputs.
These let you connect the subwoofer to your amplifier using the amplifier’s speaker outputs.
Once again, you can daisy chain to another subwoofer using the unmodified signal that comes
out of the thruput connectors.
●
A phase inversion toggle switch (0/180 degrees).
This switch allows precise acoustic matching with many systems whose output may be phase
reversed. This switch will also allow you to compensate for unusual room acoustics that occur
when the woofer is physically separate from the midrange/high frequency units. Be sure to try the
Phase switch in both positions whenever you set up the 4.5 PBM or when you change the built-in
crossover settings, since the crossover and the Phase switch interact with each other acoustically.
●
A front panel variable volume level control.
●
Automatic standby operation.
Automatic standby features a 7-10 minute turn-off delay and a front panel multi-color LED status
indicator.
●
An IEC AC power input socket.
Your subwoofer comes supplied with a heavy-duty detachable power cord.
●
Design and construction to meet all UL/CSA and European safety requirements.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Model 4.5 PBM
Connecting Your Subwoofer
The Atlantic Technology 4.5M Powered Subwoofer is simple to hook up, offering several connection
methods for maximum flexibility. Study the system diagrams starting on page 6. Once you have found
the example which most closely matches your system, hook up your subwoofer(s) as shown in that
diagram.
IMPORTANT NOTE: If you are using the complete System 4.5 with a surround processor that includes its
own filtered subwoofer output we strongly recommend that you connect the 4.5 PBM to your system using
the speaker or high level inputs. This is because most processor internal crossovers are only 12 dB per octave,
which is not steep enough for use with the higher crossover levels required for ultra-compact satellites. Only
use the low level RCA inputs when the processor outputs unfiltered signals. Should your processor include a
120 Hz or higher crossover, you may connect it to the low level inputs on the 4.5 PBM.
When using the recommended high level speaker connections and a discrete 5.1 channel receiver/processor
(Dolby Digital, DTS, etc.), set the center channel and surround speakers to the “Small” setting, and the front
left and right speakers to “Large.”
Figure 1:
Amplifier panel
and controls for
Model 4.5 PBM
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Atlantic Technology
®
Low-Level Connection
If you choose to use the low-level (RCA jacks), simply connect your subwoofer with high quality
shielded cables as shown in the diagrams. Use the diagram that best suits your connection
requirements. Please see the Important Note on the previous page for connection recommendations.
Using the Low-level Thruput
If desired, you can run a line level stereo signal through the 4.5 PBM and out to another unit. This way
you can add an additional subwoofer with minimal additional wiring. The signal that comes out of the
thruput jacks is unaltered from the input signal.
High-Level Connection
When using a discrete 5.1 channel receiver/processor, we recommend that you use the high-level
(speaker) inputs. Please see the Important Note on the previous page for connection
recommendations. Make sure to match the type and gauge speaker wire used to connect your main
speakers. We recommend that you connect your new 4.5 PBM Powered Subwoofer(s) using high
quality wire of 16 gauge or larger. There are many respected manufacturers in the audio industry that
specialize in speaker wire and interconnect cables suitable for your new system. We recommend that
you consult your local audio/video specialist for more specific information.
High-level Thruput
If desired, you can run a high level stereo signal through the 4.5 PBM and out to another unit. This
way you can add an additional subwoofer with minimal additional wiring. The signal that comes out
of the thruput jacks is unaltered from the input signal.
Warning: To prevent risk of electrical shock or damage to your equipment, always unplug all component
AC cords before proceeding with speaker and component connections! The last step in wiring your system is
plugging in the AC cords!
Figure 2:
Gold plated
5-way binding
posts. Accepts
up to 10 gauge
bare wire
You can connect your 4.5 PBM by using a variety of connectors, or by removing 1/2" of insulation
from each wire end, twisting the strands of wire together, placing the wire through one of the post
holes and screwing down the nut tightly. We recommend that you check your local electrical codes to
make sure you are not using an improper connector.
It is important to observe polarity while making speaker connections:
red (+) terminals on the amplifier to red (+) on the speaker, black (-)
on the amplifier to black (-) on the speaker. Look carefully at the
wires you are using and note that one of the wires in each pair is
marked by either a different color, printing, ridges, or a thread
intertwined with the wire strands. By convention, the marked wire is
connected to the red (+) terminal.
Note (North America only): Due to the compact nature of the connector panel, we recommend using
“banana” plugs for connection to the 5-way binding posts.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Model 4.5 PBM
Example 1:
Subwoofer
Line Out/
Low Level In
Receiver/Amplifier/Processor
Before using this
connection
method, please
see the Important
Note on page 4.
Sub Woofer Out
LOW
LEVEL
THRU
LOW
LEVEL
THRU
IN
L/
MONO
L/
MONO
IN
IN
R
R
HIGH
LEVEL
HIGH
LEVEL
Single Sub Woofer
Example 2:
Preamp Line
Out/Low
Level In for
1 Subwoofer
This arrangement
is for owners of
stereo receivers/
amplifiers with
Preamp outputs.
If your receiver/
amplifier uses
jumper links between the Pre-out
and Main In, then
you must remove
them and use
option 1 or 2. If
your receiver/
amplifier uses a
switch instead of
connectors, then
use option 3.
IN
Optional Second Sub Woofer
Receiver/Amplifier/Processor
Single Sub Woofer
Option 1
L
LOW
LEVEL
R
THRU
Pre Out
IN
L/
MONO
IN
Main In
R
HIGH
LEVEL
Y-adapters
Option 2
L
LOW
LEVEL
R
THRU
IN
Pre Out
L/
MONO
IN
Main In
R
HIGH
LEVEL
Option 3
Pre Amp
L
R
LOW
LEVEL
Internal
External
THRU
Pre Out
IN
L/
MONO
IN
Main In
R
HIGH
LEVEL
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Atlantic Technology
®
Example 3:
Preamp Line
Out/Low Level
In for
2 Subwoofers
Receiver/Amplifier/Processor
Y-adapters
L
R
Pre Out
Note that the
L/MONO input is
used on both subwoofers. Instead
of Y-adapters, you
may also use the
THRU outputs to
connect back to
the Main Inputs as
shown in Option
2 of Example 2.
Main In
LOW
LEVEL
THRU
LOW
LEVEL
THRU
IN
L/
MONO
IN
L/
MONO
IN
IN
R
R
HIGH
LEVEL
HIGH
LEVEL
Left Sub Woofer
Example 4:
Speaker Out/
High Level In for
1 Subwoofer
Right Sub Woofer
Receiver/Amplifier
Main Speakers
This is the
recommended
method for
connecting the
4.5 PBM to a
discrete 5.1
channel. Please
the the Important
Note on page 4.
Left
Right
LOW
LEVEL
THRU
IN
L/
MONO
IN
R
HIGH
LEVEL
L
THRU
R
Sub Woofer
Left Front Speaker
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7
Right Front Speaker
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Model 4.5 PBM
Example 5:
Speaker Out/
High Level In for
2 Subwoofers
Receiver/Amplifier
This is the
recommended
method for
connecting the
4.5 PBM to a
discrete 5.1
channel. Please
the the Important
Note on page 4.
You can also use
the speaker level
THRU outputs.
Note that the
L/MONO High
Level input is used
on both left and
right subwoofers.
Main Speakers
Left
Right
LOW
LEVEL
THRU
IN
LOW
LEVEL
THRU
L/
MONO
L/
MONO
IN
IN
R
R
HIGH
LEVEL
Left Front Speaker
IN
Left Sub Woofer
HIGH
LEVEL
Right Sub Woofer
Right Front Speaker
Power Connection
Connect the power cord to an AC outlet only after making all other connections to the subwoofer.
This will avoid any chance of accidentally activating the subwoofer while wiring. Atlantic Technology
DOES NOT RECOMMEND plugging the subwoofer into the switched outlet of an amplifier,
preamplifier or receiver. The power demands of the subwoofer amplifier may exceed the power rating
of the switched outlet and may damage the equipment.
The 4.5 PBM is totally automatic in its operation. The automatic on/off circuitry will only activate the
subwoofer in the presence of an audio signal from your audio/video system. After 7-10 minutes with
no signal detected from the rest of the system, the amplifier will shut itself off and go into standby
mode. When an audio signal is present, the power LED located under the front grille will glow green.
Power consumption in the standby mode is negligible. Standby operation can be completely bypassed
by plugging the 4.5 PBM into a heavy-duty switched power outlet strip if you desire. In this mode, the
subwoofer will be powered when the power switch is turned on and it will still operate in automatic
standby/on mode when the power strip is active.
Placement and Operation
Generally the best location for the Model 4.5 PBM Powered Subwoofer is in the front of the room,
close to a corner (Figure 3). Every room has its own unique sound characteristics, and flexibility in the
exact placement of the subwoofer is always desirable. In general, the closer the subwoofer is placed to a
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Atlantic Technology
®
Figure 3:
Typical arrangement for a single
subwoofer in a
home theater.
wall and especially a corner, the more
bass response you will hear. However, in
many rooms, corner placement can
produce too much bass or a “one note”
effect and the subwoofer may work better
well away from the corner.
Start here
Less Bass
More Bass
Experiment to find the best position in
your room. Refer back to the wiring
diagrams starting on page 6 to determine
the correct wiring scheme for your
particular setup. Then proceed with
listening and fine tuning.
Subwoofer Tuning Using the Variable Level Control
Start your listening with the high-pass filter set at approximately the center of its range (which
corresponds to 80Hz), the phase switch set to normal, and the front panel variable level control
(Figure 4) set to the bottom of its range (fully counterclockwise facing the front of the woofer). Play
some music that you know has good bass content, and turn the level control up until you just start to
hear the subwoofer working. Now, from your normal listening position, determine whether the
subwoofer is playing loudly enough and filling in the bass frequencies of the music evenly. If
adjustment is necessary, start by changing the setting of the front panel level control to compensate.
Figure 4:
Front Panel
Variable Level
Control located
behind the
removable grille.
If the bass seems too heavy, move the subwoofer away from the corner. If the
bass seems too thin, move the subwoofer closer to the corner. Small
differences in positioning the subwoofer can make big differences in the
overall bass response. When you find a position that seems to work well, try
switching the phase switch between its two settings, listening closely for the
smoothest transition from the subwoofer to the satellites. In many cases
people prefer more bass impact for movies than sounds natural when reproducing music. You may
wish to determine both a video level and an audio level if you find yourself falling into this camp.
Remember however, the most common error most people make is to play the subwoofer too loudly. Of
course, the Bass Police will not arrest you for this act. But should you wish for the most accurate
overall reproduction, a well balanced sound from bass to highest treble is the best way to get it. Have
fun. Experiment. Try it. You might like it.
Figure 5:
Assymmetrical
arrangement for
2 subwoofers in
a home theater,
for example, one
closer to a corner
than the other.
When two subwoofers are used, whether
for regular Dolby Pro Logic, Dolby Digital,
DTS, or pure music reproduction they
should be placed asymmetrically; that is,
in slightly different positions on each side
of the television (Figure 5). This will help
to attenuate room resonances that are
common to symmetrically positioned
subwoofers. You can also try placing the
subwoofers in the same corner, if you
wish, Experiments have shown this to be
a viable means of producing smooth bass
response in many rooms.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
9
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Model 4.5 PBM
Using the Subwoofer Lo-Pass Control
Start with the Lo-pass control of the 4.5 PBM set at the middle. Play some music with a range of bass
notes from low to high. If the bass in the transition region between the subwoofer and satellite
speakers is thin sounding, increase the Lo-pass setting by turning the knob clockwise. Alternately, if it
is too full-sounding, decrease the setting by turning the knob counter-clockwise. The goal is to
optimize the performance of the system by ensuring that the subwoofer and satellites produce a
cohesive and well integrated sound “picture.” The low frequency response of the System 4.5 satellites
has been optimized to work with approximately a 120 Hz crossover point. This provides maximum
performance and smooth integration with a dedicated subwoofer.
In general, higher crossover frequencies tend to sound boomy and are more easily localized to the
subwoofer. Higher crossover frequencies may be suitable, however, when using very small satellites
that have no real low frequency performance. Settings lower than 120 Hz should be employed if you
are using larger speakers that have extended bass response. This way, the subwoofer will only
reproduce the very lowest bass frequencies that are in the range where the large main speakers begin to
roll off. It’s generally undesirable to have the main speakers and the subwoofer overlap too much.
Larger speakers means a lower lo-pass crossover frequency, smaller speakers means a higher lo-pass
crossover frequency. Consult the manufacturer’s specified low frequency response for your main
speakers to determine the appropriate low-pass setting on your subwoofer.
The Phase Invert Mode
A subwoofer operating out of phase with the rest of the system will not provide optimum low
frequency performance. Also, the correct subwoofer phase can enhance room acoustics. Since there is
so much variation in the industry regarding phase, and no standards have been established, a switch
that will reverse the phase of the subwoofer is provided on the subwoofer amplifier’s rear panel. Listen
to a monaural musical source with strong bass content. (For example, you can use the mono switch on
an FM tuner or preamp, or use a Y-connector on the outputs of one of your source components to get a
mono signal.) Experiment with the position of the phase switch to get the most extended bass. It
should be obvious which is the correct setting. In particular, there will be a smother more integrated
transition between the satellites and the subwoofer when they are properly phased.
A Word About Center Channel Modes and “Small/Large” Speaker Settings
Many Dolby Pro Logic surround processors and surround receivers feature a “Wide” and “Normal”
mode for the center channel speaker. Atlantic Technology recommends that the center channel be
operated in the “Normal” mode when using a powered subwoofer. At this setting the center channel
speaker will sound more dynamic and the intelligibility of the system will generally be improved.
With the newer discrete digital systems (Dolby Digital AC-3, etc.) most controllers provide the option
of operating the front and rear speakers in a limited bandwidth (Small) or full range (Large) setting.
When using the 4.5 PBM with System 4.5 speakers, we recommend using the high level speaker
connections and setting the controller to the “Small” position for the center and surround speakers
and the “Large” position for the left and right speakers.
Care and Feeding of Your Subwoofer
The 4.5 PBM is constructed from 3/4" MDF, a non-resonant material ideal for speaker system
enclosures. The outside of the woofer is layered with a high quality Black Oak finished vinyl laminate.
To clean the cabinet you may use a soft cloth either dry or slightly dampened with clean water. Be
careful not to wet the cabinet or allow any water to enter the cabinet seams.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Atlantic Technology
®
The 4.5 PBM has an elegant Gloss Black top panel. Special adhesive tape has been employed that is
designed to hold the top firmly to the cabinet, yet allow release without damage. Should you wish,
you may remove the gloss top by carefully pulling it up and away from the enclosure. Under the gloss
panel, the top of the enclosure is finished in the same Black Oak laminate as the rest of the enclosure.
You should use care when cleaning the Gloss Black top. Use a soft natural fiber cloth (not paper
products, as they can scratch) slightly dampened with water. You may also use any of the specially
formulated plastic polishes available on the market, should you desire.
NOTE: The Gloss Black top is shipped with a protective paper layer attached. In order to remove this paper
layer begin peeling it up at one corner and gently and carefully pull the paper off at a sharp angle so as not
to pull the top itself from the cabinet.
Avoid placing your speakers in direct sunlight or near a source of heat that may, over time, damage the
finish.
Important: Save Your Boxes! If you can do so, save the carton, packing pieces and plastic bags that
came with your subwoofer. They will be useful in case you move or have to ship your subwoofer for any
reason. In any case, save all packing materials until you are certain that the system has suffered no damage
in shipment. If you find such damage, either visible or internal, contact your dealer immediately for the proper
return procedure.
Subwoofer Troubleshooting Guide
Once your subwoofer is set up, you should have many years of maintenance free enjoyment from your
system. However, if you should encounter a problem, refer to the following guide to help find the
solution. If the problem persists, please contact your local authorized Atlantic Technology dealer.
Problem
Possible Cause
Possible Solution
No bass output
AC power cord unplugged or plugged into a non-working outlet.
Input cables not securely connected or defective.
Plug into a working outlet.
Check all connections, then try another input cable.
Audible buzz
or hum
Input cable not securely connected or defective.
Single HI LEVEL input connected to the RIGHT channel only.
Ground loop through antenna or cable TV system input.
Check all connections, then try another input cable.
Connect to the LEFT input channel.
Test by disconnecting antenna and/or cable system input leads.
If hum goes away, install isolation balun(s) at that point.
More than one
source audible
More than one source is playing.
All the subwoofer’s inputs are active at all times. Turn off
unwanted source.
Weak bass
Subwoofer too far from the wall.
VARIABLE INPUT LEVEL set too low.
Move the subwoofer closer to a wall or corner.
Turn control up somewhat.
Weak bass: vague stereo image
Input source connected to HI LEVEL inputs is wired out of phase.
Check speaker wire connections and reconnect in proper phase.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Model 4.5 PBM
Model 4.5 PBM Specifications
Type/Features
Powered Subwoofer with Sealed Acoustic-Suspension Enclosure
Variable 50-150 Hz, 12 dB/Octave low pass output
Fixed 24 dB/Octave 180 Hz Low-Pass Filter
Driver
(1) 10" long-throw woofer, 2”, 4 layer vented aluminum voice coil, vented
motor system with Dual Diversity Crossover System (DDC)™
Amplifier Power
150 Watts RMS all discrete linear Class G power amplifier with dual
power supplies
Amplifier Distortion <0.01 %
Frequency Response 35-180 Hz ±3 dB
Peak output (SPL)
105 dB
Dimensions
17.48in x 11.81in x 15.57in; 440mm x 300mm x 395mm
Weight
37 lbs.; 16.8 kg.
Specifications are those in effect at the time of printing. Atlantic Technology reserves the right to change specifications or designs at any time without notice. Dolby Digital, AC-3,
Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation. DTS is a registered trademark of DTS Technology.
For Future Reference
Record your speaker serial number and date of purchase here:
Model Number
Serial Number
Date of Purchase
The serial number is found on the back of the speaker near the connecting terminals.
CAUTION: To reduce the risk of electric shock, do not remove
the cover (or back). No user serviceable parts inside. Refer to
qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a
risk of electrical shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating maintenance
(servicing) instructions in the literature
accompanying the appliance.
○ ○ ○○ ○○ ○○ ○○ ○○ ○○ ○○○○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○
○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○ 12
010-124.5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement