Emtek E1020US19 Single Cylinder Solid Brass Electronic Deadbolt Installation Manual
Emtek E1020 is a digital door lock that offers keyless convenience and enhanced security for your home or office. With its sleek design and easy-to-use keypad, you can enter your property with just a personalized code. The lock also features a backlit keypad for nighttime visibility and a low-battery indicator to keep you informed about its power status. You can program up to 20 user codes and easily add or delete them as needed. Additionally, the auto-lock function ensures that your door is always securely locked.
advertisement
▼
Scroll to page 2
of
12
4d 4b 4a 8 7 9 6 ITEM NO. QTY. Key 2 Outside Trim Plate Assembly 1 3 Deadbolt Latch Assembly 2 3/8” or 2 3/4” Backset 1 4 5 2 Inside Trim Plate Assembly 1 Inside Chassis 1 4b Inside Trim Plate 1 4c #8-32 x 3/8” Flat Head Machine Screw 2 4a 2 DESCRIPTION 1 4d 9V Alkaline Battery 1 #8-32 x 11/2” Flat Head Machine Screw 2 6 #8 x 3/4” Wood Screw 4 7 Strike Plate 1 8 Security Plate 1 9 #10 x 3” Wood Screw 2 2. Door Jamb Prep 2-3/4" 3 4 4. Install Inside Chassis 5 6 7 5. Install Inside Trim Plate 8 1 EMTEK 2 1 EMTE K 2 9 If you wish to Press Button Change Programming Code 1 Enter New Programming Code (6 digits) (6 digits) Add User Code Actions 2 (4 digits) Enter New User Code (4 digits) (Store up to 20 User Codes) (6 digits) Re-Enter New User Code (4 digits) •1 Green LED flash •1 beep •1 Green LED flash •1 beep •2 Green LED flashes •2 beeps •1 Green LED flash •1 beep •1 Green LED flash •1 beep •2 Green LED flashes •2 beeps Re-Enter User Code to be Deleted •1 Green LED flash •1 beep •1 Green LED flash •1 beep •2 Green LED flashes •2 beeps 4 Entering ‘4’ disables all Users (enables all if disabled) •2 Green LED flashes •2 beeps Delete All User Codes 5 Re-Enter Programming Code •1 Green LED flash •1 beep •2 Green LED flashes •2 beeps Turn Beeper On/ Off 6 Entering ‘6’ turns OFF (or ON) •1 Green LED flash •1 beep •2 Green LED flashes •2 beeps Delete User Code 3 **Enable/Disable All User Codes 10 Re-Enter New Programming Code Indicators Enter User Code to be Deleted Function Valid Code Invalid Code/Access Denied* Lock-Out Mode Error Indicators • 1 short beep, EMTEK button flashes Green. •1 Red LED flash • 2 short beeps •2 short beeps •1 short beep per second for duration Access Accepted •1 short beep •1 Green LED flash Low Battery •4 Red LED flashes •4 short beeps Blackout Battery** Button Press Accepted Outside Thumb Turn Enabled •1 long Red LED flash •4 long beeps •1 Yellow LED flash •1 Short Beep •2 Green LED flashes 11
advertisement
Related manuals
Download
PDF
advertisement