VPVL Series
VALV-POWR® SERIES VPVL
MODEL C DOUBLE-ACTING
AND SPRING-RETURN RACKAND-PINION COMPACT
PNEUMATIC ACTUATORS
VALV-POWR – VPVL double-opposed piston actuators
combine the benefits of high cycle life, a rugged construction, and an extremely compact and symmetrical
design with a unique range of features and options.
They are specifically designed for fast efficient operation of ball, butterfly, and other rotary type valves.
■
FEATURES
■
■
■
■
■
■
■
■
■
■
■
Corrosion Resistant
■
Hard-anodized PTFE-coated body, polyester-coated
end caps, and epoxy-coated springs, along with
internal and external stainless steel fasteners,
provide corrosion resistance in a variety of difficult
applications and environments.
■
Safety-contained multi-spring design with preloaded
and heavy-duty coated springs for simpler range
versatility, greater safety, and corrosion resistance.
External adjustable stops in both directions assure
flexibility and accuracy when setting the valve in
the open and closed positions.
As an added safety feature, the external adjustment
screws are slotted.The slot will indicate the presence
of internal pressure. Pressure will begin to vent
before the adjustment screws are completely
backed out of the actuator.
Reliability
■
■
SPECIFICATIONS
Maximum Supply Range: 116 psi (8 bar)
Temperature Range:
Standard
-4˚F to +175˚F (-20˚C to +80˚C)
Optional
-40˚F to +300˚F (-40˚C to +150˚C)
Rotation Adjustment:
-4˚ to +4˚; 86˚ to 94˚
Supply Media: Air, mineral-based hydraulic fluid
STANDARDS
Actuator to valve mounting: EN12116 ISO 5211/1
Actuator to solenoid mounting: Namur,VDI/VDE3845**
Actuator to accessory mounting: Namur,VDI/VDE3845*
* Except VPVL011
** Except VPVL011, 650, 700, 800
A111-3EN • 1/2009
■
Single-Source Responsibility
Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility.
Valves, actuators, and accessories can be supplied
completely assembled to provide unit responsibility
from a single source.
Versatility
Modular designs with same body and end caps for
double-acting and spring-return reduce inventory.
Springs can be added in the field to convert doubleacting to spring-return or for changes in supply pressure.
Failure direction can be easily reversed from springto-open or spring-to-close orientation simply by
inverting the pistons.
Actuator to valve attachments comply with ISO
5211/1 and EN 12116.
Solenoid valve and accessory attachments comply
with NAMUR VDI/VDE 3845.
A wide range of optional accessories and control
devices that include limit switches, solenoid valves,
and mechanical safety lockouts are available to satisfy
virtually all automated valve requirements.
Several models of 180 degree VPVL’s are optionally
available.
High Cycle Life
Bearings on all sliding and rotating moving parts to
ensure long life.
Dual piston rack-and-pinion mechanism for simple
construction, high cycle life, and constant torque.
Hard-anodized PTFE-coated extruded aluminum
body with honed internal surface for strength and
lower coefficient of friction.
Mechanically multi-guided aluminum pistons for
precise movement, low friction, and high cycle life.
Machined teeth on piston racks and pinions for
excellent rack and pinion engagement and maximum
efficiency.
METSO
A111-3EN
ACTUATOR SELECTION
valve. For spring-return units, both the spring torque and
the air torque must be sufficient. In the event confirmation
is desired for the selection of an actuator under specific
service conditions,include full details on trim,seat materials,
and media characteristics.
To select an actuator for a particular valve and service, first
determine the maximum operating torque that will be
required from the applicable valve bulletin.Then refer to the
appropriate torque output table and select an actuator
that will, at the available supply pressure, provide a torque
output no less than the required operating torque for the
Air Volume
Actuator Model
VPVL011
in.
Opening
Closing
Swept
Opening
Closing
Swept
in.
mm
3.1
4
1.2
50.8
65.6
20.3
1.5
38
3.4
90.1
55.5
1.97
50
DA
DA
9.2
VPVL051
5.5
SR
DA
SR
SR
DA
3146
4261
SR
5932
SR
10000
SR
14503
SR
10.43
25000
15032
–
12.99
1.0
0.3
0.3
2.3
1.1
0.3
0.3
3.3
1.5
0.3
0.4
3.8
1.7
0.3
0.4
5.9
2.7
0.4
0.5
7.0
3.2
0.4
0.5
8.4
3.8
0.5
0.6
9.7
4.4
0.5
0.6
11.9
5.4
0.7
0.9
14.3
6.5
0.7
0.8
18.6
8.4
0.9
1.1
21.7
9.8
0.9
1.1
22.5
10.2
1.2
1.4
27.8
12.6
1.2
1.4
32.0
14.5
1.5
1.8
39.9
18.1
1.5
1.7
43.7
19.8
1.8
2.1
52.9
24.0
2.0
2.2
55.1
25.0
2.4
2.8
69.7
31.6
2.7
3.2
78.3
35.5
3.5
4.0
99.4
45.1
3.5
4.0
115
53
4.1
4.6
139
64
4.0
4.5
183
83
4.5
5.0
225
102
6.0
7.0
295
134
7.5
8.5
373
169
265
40000
917
–
8655
2.1
240
–
2441
1526
9.45
21385
528
–
DA
5963
0.3
200
–
1305
885
7.87
15200
364
–
DA
3549
0.2
180
–
928
610
7.09
9455
217
–
DA
2556
0.5
160
–
577
362
6.30
6883
156
–
DA
1893
1.0
145
–
420
SR
5.71
4916
116
260
1451
0.2
125
–
–
DA
VPVL800
2409
300
SR
4.92
3765
89
192
924
0.2
115
–
–
DA
VPVL700
1540
231
SR
4.53
2443
56
147
717.2
kg
100
–
–
DA
VPVL650
1190
143
SR
3.94
1799
43.8
94
443.7
lb.
88
–
–
VPVL400
VPVL600
709.6
109.8
SR
3.46
1109
27.1
72.6
305.4
Opening Closing
Weight
75
–
–
DA
VPVL550
509.6
67.7
SR
2.95
780
18.6
43.3
194.1
Moving Time
Seconds1
63
–
–
DA
VPVL500
309.7
47.6
SR
2.48
490
11.8
31.1
97.8
–
–
DA
VPVL450
160.6
29.9
18.9
VPVL350
260.6
6.0
–
DA
VPVL300
–
15.9
9.8
VPVL250
150.8
–
VPVL100
VPVL200
Bore Diam.
ml
3
330
NOTES:
(1) The above times are based on the following conditions: A) Room temperature , B) Solenoid valve orifice diameter of 4 mm (5/32 in.) and a flow rate
capacity of 400 L/min (14.1 cfm), C) Minimum inner piping diameter of 8 mm (5/16 in.), D) 5.5 bar (80 psi) air supply pressure, E) Without valve loading.
2
TECHNICAL BULLETIN 1/09
A111-3EN
VA LV- P OW R S E R I E S V P V L M O D E L C D O U B L E - AC T I N G A N D S P R I N G - R E T U R N R AC K - A N D - P I N I O N C O M PAC T P N E U M AT I C AC T UATO R S
ACTUATOR SELECTION (CONTINUED)
SPRING RETURN
Actuator
Model
051 SR4/5
051 SR6
100 SR4/5
100 SR6
200 SR4/5
200 SR6
250 SR4/5
250 SR6
300 SR4/5
300 SR6
350 SR4/5
350 SR6
400 SR4/5
400 SR6
450 SR4/5
450 SR6
500 SR4/5
500 SR6
550 SR4/5
550 SR6
600 SR4/5
600 SR6
650 SR4/5
650 SR6
700 SR4/5
700 SR6
800 SR4/5
800 SR6
Spring-Return Torque Output
FT•LBS
N•m
4.5
6.1
6
8.1
7.4
10
9.8
13.3
14.7
19.9
19.6
26.5
24.3
33
32.5
44.5
33.6
45.6
44.9
60.8
54.4
73.8
72.6
98.4
69.7
95
93
126
109
148
146
198
149
202
199
269
210
285
280
379
282
383
376
510
479
649
638
865
724
981
966
1308
1221
1656
1628
2207
Air Torque Output at Specified Supply Pressure
FT•LBS, @ 60 psi
N•m @ 4.2 bar
FT•LBS @ 80 psi
N•m @ 5.5 bar
3.7
4.9
4.9
6.6
6.7
8.5
8.9
12
12
17
16
22
17
24
23
32
28
40
38
51
44
62
58
79
59
84
79
107
94
133
126
169
126
178
168
225
153
278
204
274
231
327
308
414
399
541
532
721
520
737
693
931
1105
1498
1473
1997
DOUBLE ACTING
Actuator
Model
VPVL 011 DA
051
100
200
250
300
350
400
450
500
550
600
650
700
800
40 psi
2.5
6.8
12
23.7
37.2
54
87.5
113
177
231
312
433
727
1055
1833
Torque Output in FT•LBS - VPVL XXDA Double-Acting Actuator at Specified psi Supply Pressures
50 psi
60 psi
70 psi
80 psi
90 psi
3.1
3.7
4.3
4.9
5.5
8.5
10.1
11.8
13.5
15.2
14.9
17.9
20.9
23.9
26.8
29.6
35
41
47
53
46.6
55
65
74
83
67.6
81
94
108
122
109
131
153
175
197
141
169
197
225
254
221
265
310
354
398
289
346
404
462
519
390
467
545
623
701
541
649
757
866
974
909
1091
1272
1454
1636
1319
1583
1847
2111
2375
2291
2749
3207
3665
4123
100 psi
6.2
16.9
29.8
59
93
135
219
282
442
577
779
1082
1818
2638
4581
Actuator
Model
VPVL 011 DA
051
100
200
250
300
350
400
450
500
550
600
650
700
800
2.7 bar
3.2
8.9
16
31
48
68
115
143
224
293
395
575
986
1338
2485
Torque Output in N•m - VPVL XXDA Double-Acting Actuator at Specified bar Supply Pressures
3.5 bar
4.2 bar
4.8 bar
5.5 bar
6.2 bar
4.2
5.1
5.8
6.7
7.6
11.6
14
16
18.3
20.7
20.5
24.6
28.1
32
36
40
48
55
64
72
66
79
90
103
117
93
112
128
146
165
150
181
207
236
266
194
233
266
305
344
304
365
417
478
539
397
477
545
624
703
536
643
735
842
949
745
893
1021
1170
1319
1232
1479
1725
1971
2218
1815
2179
2490
2853
3216
3106
3727
4348
4969
5590
6.9 bar
8.5
23
40
80
130
184
296
383
600
782
1056
1468
2465
3579
6211
TECHNICAL BULLETIN 5/08
3
METSO
A111-3EN
OPTIONS
Solenoid Valves
Direct-mounted solenoid valves are available in both 3-way
and 4-way configuration, which mount directly to the
actuator in accordance with NAMUR and VDI/VDE 3845
standards, excluding the VPVL011, 650, 700 and 800. In
general,3-way solenoids are used for spring-return actuators
and 4-way versions for double-acting.
end caps, allow the valve position to be set anywhere
between full closed and full open. This option limits travel
of only the counter-clockwise stroke for standard doubleacting and spring-closed units. The 100% Adjustable Stop
option is specified in the actuator ordering code.
Actuator
Direct-Mount Solenoid Valves
Part Number
031-0576-01
031-0580-01
Enclosure
NEMA IV
NEMA VII
Configuration
3 or 4-way
Pipe Size
1/4" Inlet, 1/8" Exhaust
Cv
0.7
Voltage
Standard: 120 VAC 60 Hz (110/50)
Optional: 240 VAC 60 Hz, 12 VDC, 24 VDC
Body Material
Black Anodized Aluminum
Power Consumption AC: 6.9 watts
DC: 6.3 watts
NOTE: Please consult factory for other solenoid valves or additional options
including special voltages,double solenoids,special electrical connections,etc.
Mechanical Safety Lockout
To comply with the intent of OSHA requirements for locking actuators in position prior to performing maintenance,
an actuator can have the mechanical safety lockout option
added to it. Design of the stop cam allows for locking the
actuator in either the full-open or full-closed position.
Actuators equipped with this option have a special lockout
screw and a tamperproof cover attached to the housing of
the actuator with stainless steel wire. The lockout kits are
readily available to permanently lock the actuator in place
to prevent unwanted operation.
100% Adjustable Travel Stop
To limit the rotation on the stroke beyond the standard
±4˚ of a VPVL actuator, a stainless steel 100%-adjustable
travel stop option can be added. The stops, located in the
VPVL051
VPVL100
VPVL200
VPVL250
VPVL300
VPVL350
VPVL400
VPVL450
VPVL500
VPVL550
VPVL600
VPVL650
VPVL700
VPVL800
Lockout Kits
VPVL051
LD78
VPVL100
LD79
VPVL200
LD80
VPVL250
LD81
VPVL300
LD82
VPVL350
LD83
VPVL400
LD84
VPVL450
LD85
VPVL500
LD86
VPVL550
LD87
VPVL600
LD88
VPVL650
LD89
VPVL700
LD90
VPVL800
LD91
Stop Screw
Type A
VPVL051-300
Stop Screw
Type B
VPVL350-800
4
TECHNICAL BULLETIN 1/09
100% Travel Stop Lengths
L Min
L Max
inch
mm
inch
6.2
158
7.3
7.2
184
8.5
9.5
242
11.3
11.0
280
13.0
11.9
303
14.1
14.0
356
16.7
14.5
368
17.5
17.7
449
21.1
18.1
461
21.9
20.9
531
24.8
24.7
628
29.1
25.7
653
30.9
30.0
762
36.1
35.8
910
42.8
L Min. Approx.
L Max. Approx.
Special longer bolt used to
lock the actuator in one
position when needed.
mm
186
216
286
330
359
424
444
537
555
631
739
785
918
1086
A111-3EN
VA LV- P OW R S E R I E S V P V L M O D E L C D O U B L E - AC T I N G A N D S P R I N G - R E T U R N R AC K - A N D - P I N I O N C O M PAC T P N E U M AT I C AC T UATO R S
Declutchable Manual Override
A side-declutchable manual override is available for VPVL
actuators. It consists of a manual gear actuator mounted
between the actuator and the valve.The device is normally
disengaged from the shaft. Upon engagement of the
override clutch, overriding the actuator is done with ease,
aided by the high-reduction ratio of the manual gear unit.
DIMENSIONS
F
B
C
J
D
E
Actuator
Mounting
Side
S
G
H
Approximate Dimensions - Inches
VPVL Actuator
Model
(DA or SR)
Declutchable
Override
Kit
B
C
D
E
F
G
H
J
S
VPVL250 and VPVL300
VPVL350 and VPVL400
VPVL450 and VPVL500
VPVL550 and VPVL600
VPVL650 and VPVL700*
VPVL800
DO-1
DO-2
DO-3
DO-4
DO-5
DO-6
5.75
7.68
8.74
9.84
10.87
13.39
6.89
9.49
11.12
12.84
14.45
16.69
5.61
6.06
7.46
9.00
10.16
12.32
2.36
2.48
3.31
4.23
5.00
6.06
4.53
5.63
6.30
6.77
7.48
8.07
1.44
2.09
2.48
2.36
2.68
3.07
8.94
10.28
10.63
13.31
14.41
15.63
7.87
7.87
11.81
19.69
35.43
39.37
0.47
0.59
0.79
0.79
0.98
0.98
Approx.
Weight
lbs.
22
40
50
84
141
201
* The VPVL700 DA unit may be used if the air pressure required to produce the needed output torque is lower than 95 psi.
Approximate Dimensions - mm
VPVL Actuator
Model
(DA or SR)
Declutchable
Override
Kit
B
C
D
E
F
G
H
J
S
VPVL250 and VPVL300
VPVL350 and VPVL400
VPVL450 and VPVL500
VPVL550 and VPVL600
VPVL650 and VPVL700*
VPVL800
DO-1
DO-2
DO-3
DO-4
DO-5
DO-6
146
195
222
250
276
340
175
241
282
326
367
424
142
154
190
228
258
313
60
63
84
107
127
154
115
143
160
172
190
205
37
53
63
60
68
78
227
261
270
338
366
397
200
200
300
500
900
1000
12
15
20
20
25
25
Approx.
Weight
kgs.
10
18
23
38
64
91
* The VPVL700 DA unit may be used if the air pressure required to produce the needed output torque is lower than 6.5 bar.
TECHNICAL BULLETIN 5/08
5
METSO
A111-3EN
DIMENSIONS
Model VPVL 051 – 800
Z
C
C
4
Port 2
4
X
P
Port 4
Y
B
B
B1
I
H
L
A
M
L
M
T Connection
Detail X
N
M5xE
S
S
Port 2
Port 4
D
Port 4
D
R
G
R
Detail X
VPVL 051 – 600
Port 2
VPVL 011, 650 – 800
F
M6x12
M6
12
BottomView ISO5211
45˚
12
N
P
45˚
4
W
Q
CH
Model VPVL011
6
TECHNICAL BULLETIN 1/09
16.08
17.22
19.17
21.38
24.45 11.75
26.93 12.99
34.39 16.14
450
500
550
600
650
700
800
114
140
158
211
247
268
315
345
408
437
487
543
621
684
876
011
051
100
200
250
300
350
400
450
500
550
600
650
700
800
A
13.58
400
Size
12.40
350
410
330
298
245
220
196
177
157
145
127
115
102
85
69
43
B
9.65
8.68
7.72
6.97
6.18
5.71
5.00
4.53
4.02
3.35
9.74
8.29
200
10.57
6.24
100
2.72
1.70
300
5.53
B
250
4.50
051
A
011
Size
165.0
165.0
150.5
122.0
111.5
98.0
98.5
78.5
72.5
63.5
57.5
51.0
42.5
34.5
0.0
B1
6.50
6.50
5.93
4.80
4.39
3.86
3.88
3.09
2.85
2.50
2.26
2.01
1.67
1.36
0.00
B1
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.16
0.28
E
M6x10 0.31
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x4
D
383
298
251
213
191
169
156
136
127
111
98
85
72
59
43
C
M6x10
M6x10
M6x10
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x8
M5x4
D
8
8
8
8
8
8
8
9
8
8
8
8
8
4
7
E
15.08 M6x10 0.31
11.75 M6x10 0.31
9.88
8.39
7.51
6.65
6.16
5.35
5.00
4.37
3.84
3.33
2.83
2.32
1.70
C
130
130
130
130
130
80
80
80
80
80
80
80
80
80
50
F
5.12
5.12
5.12
5.12
5.12
3.15
3.15
3.15
3.15
3.15
3.15
3.15
3.15
3.15
1.97
F
30
30
30
30
30
30
30
30
30
30
30
30
30
30
25
G
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
0.98
G
200
130
130
100
100
85
85
70
70
55
55
35
35
25
20
H
7.87
5.12
5.12
3.94
3.94
3.35
3.35
2.76
2.76
2.17
2.17
1.38
1.38
0.98
0.79
H
57
50
48
40
40
35
35
24
24
21
21
16
16
12
10
I
2.24
1.97
1.89
1.57
1.57
1.38
1.38
0.94
0.94
0.83
0.83
0.63
0.63
0.47
0.39
I
204
164
131
110
99
88
80
70
64
56
50
42
36
29
20
L
8.03
6.44
5.16
4.33
3.90
3.46
3.15
2.74
2.52
2.20
1.95
1.67
1.42
1.14
0.80
L
214
166
131
112
105
99
91
82
77
67
57
52
47
41
20
M
8.43
6.54
5.16
4.41
4.13
3.90
3.60
3.23
3.03
2.64
2.24
2.05
1.85
1.63
0.80
M
7.28
6.50
3.09
2.44
2.28
2.05
1.85
1.77
1.67
1.48
1.28
1.20
1.18
1.04
-
O
1.97
1.97
1.97
1.97
1.97
1.18
1.18
1.18
1.18
0.79
0.79
0.79
0.79
0.79
0.79
P
36
36
36
36
36
27
27
27
27
17
17
17
11
11
11
N
185
165
78
62
58
52
47
45
42
38
33
30
30
26
-
O
50
50
50
50
50
30
30
30
30
20
20
20
20
20
20
P
6.50
6.50
5.51
5.51
4.92
4.92
4.02
4.02
2.76
2.76
1.97
1.97
1.40
1.40
Q
254
165
165
140
140
125
125
102
102
70
70
50
50
36
36
Q
10.00
Dimensions- mm / kg
1.42
1.42
1.42
1.42
1.42
1.06
1.06
1.06
1.06
0.67
0.67
0.67
0.43
0.43
0.43
N
Dimensions- inches / lb.
40
40
40
32
32
32
32
32
32
32
32
32
32
32
24
R
1.57
1.57
1.57
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
0.94
R
45
45
45
24
24
24
24
24
24
24
24
24
24
24
32
S
1.77
1.77
1.77
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
1.26
S
M16
M20
M20
M16
M16
M12
M12
M10
M10
M8
M8
M6
M6
M5
M5
W
M16
M20
M20
M16
M16
M12
M12
M10
M10
M8
M8
M6
M6
M5
M5
W
44.5
44.5
44.5
44.5
44.5
24.5
24.5
24.5
24.5
14.5
14.5
14.5
14.5
14.5
14.5
X
1.75
1.75
1.75
1.75
1.75
0.96
0.96
0.96
0.96
0.57
0.57
0.57
0.57
0.57
0.57
X
20.0
20.0
20.0
20.0
20.0
14.5
14.5
14.5
14.5
8.0
8.0
8.0
8.0
8.0
8.0
Y
0.79
0.79
0.79
0.79
0.79
0.57
0.57
0.57
0.57
0.31
0.31
0.31
0.31
0.31
0.32
Y
1/2
1/2
3/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/8
1/8
1/8
1/8
T NPT
1/2
1/2
3/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/8
1/8
1/8
1/8
T NPT
F25
F16
F16
F14
F14
F12
F12
F10
F10
F07
F07
F05
F05
F03
F03
ISO
Flange
F25
F16
F16
F14
F14
F12
F12
F10
F10
F07
F07
F05
F05
F03
F03
ISO
Flange
55
46
46
36
36
27
27
22
22
19
19
14
14
11
9
CH
2.17
1.81
1.81
1.42
1.42
1.06
1.06
0.87
0.87
0.75
0.75
0.55
0.55
0.43
0.35
CH
115
115
115
80
80
65
65
56
56
40
40
40
40
40
40
Z
4.53
4.53
4.53
3.15
3.15
2.56
2.56
2.20
2.20
1.57
1.57
1.57
1.57
1.57
1.57
Z
1.0
-
373
225
139
99
70
53
40
27.8
21.7
14.3
9.7
7.0
3.8
2.3
134
83
53
35
25
20
15
10
8.4
5.4
3.8
2.7
1.5
0.95
0.45
DA
169
102
64
45
32
24
18
13
9.8
6.5
4.4
3.2
1.7
1.04
-
SR
Weight
295
183
115
78
55
44
32
22.5
18.5
11.9
8.4
5.9
3.3
2.1
SR
Weight
DA
A111-3EN
VA LV- P OW R S E R I E S V P V L M O D E L C D O U B L E - AC T I N G A N D S P R I N G - R E T U R N R AC K - A N D - P I N I O N C O M PAC T P N E U M AT I C AC T UATO R S
TECHNICAL BULLETIN 5/08
7
METSO
50 41 10 18 39
5*
A111-3EN
19
8*
30
11*
3
2
8*
1
17
4
21*
13
6*
* Suggested Spare Parts
for Maintenance
42
31
60
7*
14*
15*
20*
16* 40 12 9*
BILL OF MATERIALS AND PARTS LIST
No.
Unit Qty
Part Description
1
2
3
4
5*
6*
7*
8*
9*
10
11*
12
13
14*
15*
16*
17
18
19
20*
21*
30
31
39
40
41
42
1
2
2
2
2
1
1
2
2
1
2
2
8/12/ 2
2
2
2
min. 4/ max.12
1
1
1
1
13
13
1
2
1
2
50
1
Body
60
1
Drive Shaft
Octi-Cam (Stop Arrangement)
Stop Cap Screw
Washer (Stop Cap Screw)
Nut (Stop Cap Screw)
Bearing (Piston Back)
Bearing (Pinion Top)
Bearing (Pinion Bottom)
Thrust Bearing (Pinion)
Plug (Transfer Port)
Thrust Washer (Pinion)
O-ring (Stop Cap Screw Seal)
Piston Guide
Cap Screw (End Cap)
O-ring (End Cap)
Bearing (Piston Head)
O-ring (Piston)
Spring (Cartridge)
Spring Clip (Pinion)
Position Indicator
O-ring (Pinion Bottom)
O-ring (Pinion Top)
Right End Cap3
Left End Cap3
Cap Screw (Indicator)
Pistons
Actuator Identification Label
End Cap Label
Material
Specifications
Stainless Steel1
Stainless Steel
Stainless Steel
Stainless Steel
Polyphthalamide
Polyetherimide
Polyetherimide
Polyphthalamide
Nitrile Rubber
Stainless Steel
Nitrile Rubber
Polyphthalamide GF
Stainless Steel
Nitrile Rubber
Polyphthalamide
Nitrile Rubber
Alloy Steel
Carbon Steel
Polypropylene GF
Nitrile Rubber
Nitrile Rubber
Aluminum
Aluminum
Stainless Steel
Aluminum
Polyester Aluminum
Polyester Aluminum
EN 10088-3/ISO 10831
ASTM A193
ISO 3506
ISO 3506
Amodel ET1001HS
Stanyl TW300
Stanyl TW300
Amodel ET1001HS
NBR 70Shore A
EN 10088-3
NBR 70Shore A
Amodel AS1145
ISO 3506
NBR 70Shore A
Amodel ET1001HS
NBR 70Shore A
DIN 17223 Part2
DIN 17222
Hostalen PPN
NBR 70Shore A
NBR 70Shore A
UNI 5075
UNI 5075
ISO 3506
UNI 5075
Aluminum
ASTM B221
Carbon Steel Plated
ASTM A105
* Suggested spare parts for maintenance
Notes: (1) AISI 420 for models VPVL-051 through 300; GS400-15 for models VPVL-350 through 800
(2) Qty 8 pieces for models VPVL-051 through 600; Qty 12 pieces for model VPVL-700
(3) For models VPVL500 through VPVL700, right and left end-caps are symmetric
8
TECHNICAL BULLETIN 1/09
Corrosion
Protection
Epoxy Coated
ENP
Polyester-Coated
Polyester-Coated
Anodized
Anodized
PTFE-Coated
ENP
A111-3EN
VA LV- P OW R S E R I E S V P V L M O D E L C D O U B L E - AC T I N G A N D S P R I N G - R E T U R N R AC K - A N D - P I N I O N C O M PAC T P N E U M AT I C AC T UATO R S
HOW TO ORDER
To specify a complete VALV-POWR VALUE-LINE Actuator, simply make a selection from the code boxes below.
EXAMPLE: VPVL 400 SR4/5 B AS C, shown below, is a 59 FT•LBS 60-psi (84 N•m @ 4.2 bar) spring-return actuator with
spring-to-close rotation, hard-anodized PTFE-coated body, polyester-coated end caps, standard temperature rating, and
100% adjustable travel stops.
1
2
3
4
5
6
7
VPVL
400
SR4/5
B
AS
C
—
NOTE: for multiple options, specify them in order as listed in Item 5, for example: VPVL400 SR4/5 B HT AS Model C.
1
VPVL
Product Group
Size
2
011, 051,
100, 200,
250, 300,
350, 400,
Select from torque table
450, 500,
550, 600,
650, 700,
800
3
DA
SR4/5
SR6
4
Exterior Protection*
B
Hard-Anodized PTFE-Coated Body &
Polyester-Coated End Caps
VALV-POWR VALUE-LINE Double-Opposed Piston Actuator
Series+
VALV-POWR VALUE-LINE Double-Opposed Piston Actuator
Spring-Return 60-psi (4.1 bar) Spring-to-Close (CW Rotation)
Spring-Return 80-psi (5.5 bar) Spring-to-Close (CW Rotation)
+ Other spring rates on application
* Consult factory for other protection options.
5
Options
–
Standard Temperature Rating: -4˚F to +175˚F (-20˚C to +80˚C)
HT
High-Temperature Rating: -4˚F to +300˚F (-20˚C to +150˚C)
LT
Low-Temperature Rating: -40˚F to +175˚F (-40˚C to +80˚C)
LX
Low-Temperature Rating: -60˚F to +175˚F (-51˚C to +80˚C)
FO
Spring-to-Open (CCW Rotation)
AS
100% Travel Stop
LD
Mechanical Safety Lockout
Note* “LX” option must be ordered complete from the factory.
6
Model
C
Model C
7
Modifier Code
–
Standard
XB
ATEX Approval
TECHNICAL BULLETIN 5/08
9
Subject to change without prior notice.
Metso Automation Inc.
Europe, Levytie 6, P.O. Box 310, 00811 Helsinki, Finland.
Tel. +358 20 483 150. Fax +358 20 483 151
North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, MA 01545, USA.
Tel. +1 508 852 0200. Fax +1 508 852 8172
Europe, 6-8 rue du Maine, 68271 Wittenheim Cedex, France.
Tel. +33 (0)3 89 50 64 00. Fax +33 (0)3 89 50 64 40
South America, Av. Independéncia, 2500- Iporanga, 18087-101, Sorocaba-São Paulo
Brazil. Tel. +55 15 2102 9700. Fax +55 15 2102 9748/49
Asia Pacific, 238A Thomson Road, #25-09 Novena Square Tower A, 307684 Singapore.
Tel. +65 6511 1011. Fax +65 6250 0830
China, 19/F, the Exchange Beijing, No. 118, Jianguo Lu Yi, Chaoyang Dist, 100022 Beijing, China.
Tel. +86-10-6566-6600. Fax +86-10-6566-2575
Middle East, Roundabout 8, Unit AB-07, P.O. Box 17175, Jebel Ali Freezone, Dubai,
United Arab Emirates. Tel. +971 4 883 6974. Fax +971 4 883 6836
www.metso.com/automation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement