OPTOTRONIC Linear LED drivers (01/15)

OPTOTRONIC Linear LED drivers (01/15)
www.osram.com/optotronic
Light is flexible
OPTOTRONIC® Linear
LED drivers
Linear indoor drivers with big impact:
OPTOTRONIC® Intelligent DALI, OPTOTRONIC® Intelligent and
OPTOTRONIC® FIT
Light is OSRAM
OPTOTRONIC® Linear | Introduction
Excellent reasons to choose
OPTOTRONIC® drivers
With our OPTOTRONIC® drivers, users benefit from high-performance products that
are characterized by high reliability, efficiency, flexibility and quality:
1. Maximum reliability thanks to long experience:
Re-use of know-how from well-proven OSRAM ECGs
(electronic control gears) such as HALOTRONIC®,
POWERTRONIC® and QUICKTRONIC®.
2. High energy efficiency: Up to 92 % (full load) and further
energy saving with proprietary OSRAM light management
systems (LMS).
3. Freedom of design: Small form factors similar to ECGs
for traditional lamps, SELV and non-isolated drivers for
maximum flexibility in luminaire design.
4. Flexibility of application: Suitable for PrevaLED®
modules and other modules available in the market.
5. Wide product portfolio: Various product families, window drivers, dimmable products and different wattages.
Future-proof solutions
Using OPTOTRONIC® drivers not only means using durable,
high-performance products but also staying flexible in terms
of future application: OPTOTRONIC® drivers can be perfectly
adjusted for their respective tasks and, if required, also be
optimized by means of top-quality additional components
such as OSRAM LMS.
Our OPTOTRONIC® Linear portfolio
OTi
DALI
OTi
OT
FIT
2
OPTOTRONIC® Intelligent DALI
Highest efficiency, full flexibility and maximum reliability
OPTOTRONIC® Intelligent
Highest efficiency, flexibility and maximum reliability
OPTOTRONIC® FIT
High efficiency and maximum reliability
OPTOTRONIC® Linear | Introduction
Where can OPTOTRONIC® Linear drivers be used?
Floor-standing uplights
Suspended luminaires
Surface-mounted luminaires
Wall and ceiling luminaires
Trunking systems and batten
(linear)
luminaires
(free-standing)
Recessed luminaires
Application areas
— Offices, e.g. small or open-plan
offices, meeting rooms, reception
areas
— Public buildings, e.g. hospitals,
universities, schools and gyms
— Industry, e.g. production or
logistics areas
— Retail, e.g. big retail outlets, food
and non-food areas
Damp- and water-proof
luminaires
3
OPTOTRONIC® Linear | Introduction
OPTOTRONIC® Linear LED drivers
OPTOTRONIC® Linear drivers are the solution for a wide variety of luminaire types and applications. Developed
for linear light applications such as office or industry lighting, the OPTOTRONIC® Linear drivers offer you maximum
flexibility in the design of your LED-based luminaires – no matter if you need SELV or non-isolated drivers.
Designed for the needs of your customer!
OPTOTRONIC® is a global brand with products suitable for the Americas. Please consult your sales contact for
more information.
Main benefits at a glance
— Extensive portfolio of easy-to-use solutions: two product
families with wide dimming range or on/off with adjustable output current
— SELV and non-isolated versions: many possible
combinations with any LED module
— Easy integration into new LED luminaires thanks to the
30 x 21 mm housing of all devices
— High level of efficiency and reliability
— Fully programmable and digital platform – see
OPTOTRONIC® Intelligent DALI
OPTOTRONIC® Linear driver portfolio
OTi
DALI
Dimming
Comfort dimming AM+PWM
Lowest dimming level
OTi
DALI
OT
FIT
OTi
OT
FIT
Dimmable (DALI):
Dimmable (DALI):
OPTOTRONIC®
OPTOTRONIC®
OPTOTRONIC®
Non-dimmable:
Non-dimmable:
Intelligent
Intelligent
Intelligent
OPTOTRONIC® FIT
OPTOTRONIC® FIT
Window driver
Window driver
Window driver
3 currents to be set
Fixed output
(SELV)
(non-isolated)
(non-isolated)
(SELV)
(non-isolated)
1%
1%
Non-dimmable:
DALI DT6
Touch DIM®/Touch DIM® Sensor
Corridor function
DC operation
Emergency lighting*
Fixed DC level
(on/off by current
modulation)
Adjustable DC level
(by software)
(by software)
(by software and/or
(by software and/
resistor)
or resistor)
Output current
Adjustable
(by resistor)
(CS)
Current tolerances [%]
≤ 5**
≤5
≤5
≤ 20
≤ 10
Ripple at 100 Hz [%]
<1
< 10
< 10
<7
< 10
up to 91 %
up to 92 %
up to 92 %
up to 87 %
up to 90 %
Stand-by losses [W]
< 0.5
< 0.3
Input voltage range [V]
220-240
220-240
220-240
220-240
220–240
Lifetime [h]***
100000
100000
100000
100000
100000
Ta range [°C]
-25…+50
-25…+50
-25…+50
-25…+50
-25…+50
Suitable for luminaire class****
I
I
I
I
I
Functions and performances
Overtemperature protection
Energy efficiency
CLO
* According to IEC 61347-2-13
AM = Amplitude Modulation
** Version with < 2 % available soon
PWM = Pulse Width Modulation
*** Operation at max. Tc -10 K, maximum failure rate of 10 %
DT6 = DALI Device Type 6
**** Special permission for class II luminaires possible on request
CS = Current Setting
CLO = Constant Lumen Output
4
OPTOTRONIC® Linear | Introduction
Guarantee and product identification
Applicable guarantee periods and OSRAM nomenclature/marking
Guarantee
OSRAM is committed to the high quality of its products. Any
product that has failed because of a material or manufacturing
defect will be refunded or given a credit note. The following
guarantee periods apply to the OPTOTRONIC® Linear drivers:
OPTOTRONIC® Intelligent DALI
OPTOTRONIC® Intelligent
OPTOTRONIC® FIT
5 years*
5 years*
5 years*
* Operating time of no more than 5 000 hours per year, not exceeding
5
Year
OSRAM
Guarantee
All details on relevant guarantees and the
general requirements can be found at:
www.osram.com/guarantee
Project-specific guarantees on request.
max. allowed Tc temperature
Nomenclature and marking (example)
Product family and dimming
OTi DALI: OPTOTRONIC® Intelligent DALI
OTi: OPTOTRONIC® Intelligent
OT FIT: OPTOTRONIC® FIT
Power (out)*
30: 30 W
35: 35 W
50: 50 W
60: 60 W
80: 80 W
90: 90 W
Supply voltage
220-240: 220-240 V
Output current (max.)
125: 125 mA
250: 250 mA
350: 350 mA
550: 550 mA
700: 700 mA
1A0: 1000 mA
1A4: 1400 mA
1A6: 1600 mA
2A1: 2100 mA
Non-isolated
D: Direct current (non-isolated)
Control (current)
CS: Current setting
LT2: LEDset2
Form factor
L: Linear
OTi DALI 60/ 220-240 / 550 D LT2 L
* For detailed power values, please see product data sheet (www.osram.com)
5
OPTOTRONIC® Linear | OTi DALI
OTi
DALI
OPTOTRONIC® Intelligent DALI
Highest efficiency, full flexibility and maximum reliability
EL
Product features
— Window driver with adjustable output current via DALI
or LEDset2 interface (resistor)
— Suitable for class I luminaires
— Lifetime of up to 100 000 hours** and high ambient
temperature of up to +50/60 °C
— Overtemperature, overload and short-circuit protection
as well as open-circuit-proof
— Stepless and color-consistent dimming with DALI (from
100 % to 1 %, hybrid (comfort) dimming)
— Programmable features: CLO (constant lumen output),
corridor function, Touch DIM® (Sensor), emergency lighting
— Suitable for emergency lighting systems with central
battery according to IEC 61347-2-13
CORRIDOR
FUNCTION
TOUCH DIM
SENSOR
SMART
GRID
5
Year
OSRAM
Guarantee*
OPTOTRONIC® Intelligent (OTi) DALI driver
Technical data
Product
Product
LxWxH
Iout
Uout
Pout
Eff. max. Ta / Tc
Lifetime
Iout accur. Isolation
Ripple at
reference
number
(mm)
(mA)
(V)
(W)
(%)
(h)***
(%)
100 Hz (%)
OTi DALI 35/220-
20-
(°C)
-25…60/
240/700 LT2 L
OTi DALI 50/220-
4052899245389 360x30x21 200-700
54****
20-
4-37
> 89
75/65
50k/100k 2
-25…50/
SELV
<1
240/1A4 LT2 L
4052899028098 360x30x21 600-1400
54****
12-54
> 89
75/65
50k/100k 2
SELV
<1
50k/100k 2
SELV
<1
50k/100k 2
SELV
<1
OTi DALI 80/220240/1A6 LT2 L
204052899028074 360x30x21 600-1600
OTi DALI 80/220240/2A1 LT2 L
54****
-25…50/
12-80
> 90
204052899028050 360x30x21 1000-2100 54****
-25…50/
32-80
> 91
54-240 1.5-60
> 92
4052899188662 280x30x21 120-550
OTi DALI 90/220240/1A0 LT2 L
80/70
-25…60/
OTi DALI 60/220240/550 D LT2 L
80/70
75/65
non50k/100k 5
-25…50/
4008321867568 280x30x21 250-1000
54-240 13.5-90 ≥ 92
75/65
isolated
< 10
non50k/100k 5
isolated
< 10
* For details on our guarantee requirements,
go to www.osram.com/guarantee
** Operation at max. Tc -10 K, maximum failure
rate of 10 %
*** At corresponding Tc temperature,
maximum failure rate of 10 %
**** Smart power management allows the
operation of LED modules with a forward
voltage above 54 V at a very low ambient
temperature
6
OPTOTRONIC® Linear | OTi DALI
OPTOTRONIC® Intelligent DALI
OTi
DALI
Special OTi features go way beyond the normal DALI standard
New flexibility thanks to programmable
DALI LED drivers
The DALI LED drivers of the second generation (OSRAM DALI)
allow for full digital programming via the DALI magic hardware
and a specific free OEM software:
— Tuner4TRONIC® (T4T)
— No need for an external resistor to set the current in case
of digital programming
— Settings can be locked to prevent unauthorized changes
OEMs can download T4T at:
www.osram.com/T4T
CORRIDOR
FUNCTION
Corridor function*
The corridor function provides direct connection to commercially available motion sensors. A pre-installed program runs
“out of the box” in the device. It can be individually adjusted via
DALI magic and Tuner4TRONIC®. Three dimming levels and
the associated overrun times can be adjusted individually as
required. Advantage: Simple and energy-efficient lighting in
application areas such as stairwells, corridors and parking blocks.
EL
SMART
GRID
SMART GRID
The OSRAM DALI LED drivers can monitor the power consumption, the lamp operating hours (resettable) and the operating temperature of the driver. Advantage: SMART GRID can
also analyze the lighting, thus allowing for an even more efficient operation of the system.
TOUCH DIM
SENSOR
Touch DIM® function*
The Touch DIM® function offers a simple and cost-effective
way of manual dimming and switching of up to 20 OTi DALI
LED drivers via standard pushbuttons. Moreover, the lighting
level can be automatically controlled with special, directly
connectable Touch DIM® light and presence sensors, leading
to energy savings of more than 50 %. In addition to this plug
& play functionality, the Touch DIM® function also allows an
individual parameterization via DALI magic and Tuner4TRONIC®.
Emergency light (according to IEC 61347-2-13)
OTi DALI, OTi and OT FIT drivers have an EL quality label
and are designed for emergency lighting according to IEC
61347-2-13. In addition to the functions used in accordance
with the DALI standard, e.g. system failure level (fractionation
of the control line), DALI LED drivers offer an optional automatic detection of the DC supply, which sets a pre-programmed luminous flux between 0 and 100 % (factory setting:
15 %). This variably adjustable luminous flux value is protected from inadvertent overwriting by a locking bit. The setting
can be carried out via the bus system or DALI magic and
Tuner4TRONIC®.
CLO
CLO (constant lumen output)
The CLO functionality is an essential part of OSRAM DALI
LED drivers. Activating this function provides stable lighting
conditions over the entire lifetime of LED modules. Year by
year, the lumen output of LED modules decreases due to the
loss of phosphoric components. In order to balance this out,
the CLO function increases the output current smoothly over
the entire lifetime of the modules – it typically starts with 85 %
of the LED power. This not only ensures stable lighting but
also saves energy and increases the lifetime of the LEDs.
* Useful information for the installation of the Touch DIM® and corridor function can be found in the technical application guide QUICKTRONIC®
Intelligent DALI DIM (www.osram.com/oem-download)
7
OPTOTRONIC® Linear | OTi DALI
LEDset 2nd Generation standardization
With the experience gained from the LEDset technology
and as a reaction to the growing demand of OEMs to introduce a standardized multi-vendor electrical interface for SSL
systems, OSRAM now presents an enhanced version of
LEDset with plenty of new features: LEDset 2nd Generation.
Hybrid (comfort) dimming technology
OPTOTRONIC® Intelligent DALI LED drivers dim from 100 %
to 1 %. In order to achieve optimum dimming, e.g. by ensuring
that it is not visible and by avoiding stroboscopic effects,
OSRAM combines two dimming methods: amplitude modulation and pulse width modulation (PWM).
A smart electrical interface between the LED driver and the
LED modules is the missing link essential to the maturity of
the SSL components business. With the LEDset 2nd Generation standardized electrical interface for SSL systems,
OSRAM offers a technology that closes this link and fully
matches the requirements:
— Cost-efficient
— Reliable
— Easy and ready to use
From 100 % to around 30 %, the drivers are dimmed by
amplitude modulation. This is done by the adjustment of the
current amplitude: the amplitude is decreased to dim the
lighting down. The dimming levels between 1 % and around
30 % are controlled by pulse width modulation (PWM). This
combination offers the best way to ensure a smooth, nonflicker dimming behavior.
LEDset 2nd Generation is an analog 3-wire interface, including
LED supply, allowing basic communication between an
LED driver and one or more LED modules. The interface
supports the following main functions:
— Output current setting of constant-current drivers to single
LED modules as well as to series/parallel-connected
LED modules
— Best matching of driver and modules working point
(e.g. lm/W)
— Self-configuration according to system structure, automatic tracking of technology development (future-proof)
— Easy mode of operation (plug & play)
— Additional monitoring and protection features
(e.g. thermal protection of the LED modules)
— Added value for OEMs: reliable TCO proposition,
reduced structural costs
Hybrid dimming
Integral current value
(PWM with ~ 500 Hz)
Output current [%]
50
0
100
Amplitude
modulation
~ 30
PWM
1
Dimming level [%]
OPTOTRONIC® Linear | OTi DALI
Individual DALI programming
OTi DALI Linear drivers offer wide operating windows and
thus ensure a high degree of flexibility. Therefore, LED generation upgrades can be easily managed, allowing for futureproof solutions, and the number of different product versions
in the warehouse can be reduced.
Adjustment of the current is possible in three different ways:
— Programming by OSRAM software
— Use of a simple resistor (LEDset2)
— Automatic recognition via the LEDset2 interface when
connected to certain PrevaLED® or other LED modules
with LEDset wire
OTi DALI operating range (SELV)
OTi DALI 35/220-240/700 LT2 L
OTi DALI 50/220-240/1A4 LT2 L
OTi DALI 80/220-240/1A6 LT2 L
OTi DALI 80/220-240/2A1 LT2 L
Voltage [V]
50
40
30
20
Various operating windows are optimized for different general
lighting applications and target lumen packages. Please
find out more about the programming feature on page 7.
0
500
1000
1500
2000
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OTi DALI 80/220-240/2A1 LT2 L:
Voltage: 20–54 V
Current: 1000 –2100 mA
OTi DALI operating range (non-isolated)
OTi DALI 60/220-240/550 D LT2 L
OTi DALI 90/220-240/1A0 LT2 L
Voltage [V]
250
200
150
100
50
0
200
400
600
800
1000
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OTi DALI 90/220-240/1A0 LT2 L:
Voltage: 54–240 V
Current: 250–1000 mA
OPTOTRONIC® Linear | OTi
OTi
®
OPTOTRONIC Intelligent
Highest efficiency, flexibility and maximum reliability
EL
5
Product features
— Window driver with adjustable output current via LEDset2
interface (resistor)
— Suitable for class I luminaires
— Lifetime of up to 100 000 hours** and high ambient
temperature of up to +50 °C
— Overtemperature, overload and short-circuit protection
as well as open-circuit-proof
— Suitable for emergency lighting systems with central
battery according to IEC 61347-2-13
Year
OSRAM
Guarantee*
OPTOTRONIC® Intelligent (OTi) driver
Technical data
Product
Product
LxWxH
Iout
Uout
Pout
Eff. max. Ta / Tc
Lifetime Iout accur. Isolation
Ripple at
reference
number
(mm)
(mA)
(V)
(W)
(%)
(h)***
100 Hz (%)
54-
OTi 60/220240/550 D LT2 L
OTi 90/220-
4052899188419 280x30x21 125-550
240
54-
240/1A0 LT2 L
4052899188556 280x30x21 250-1000 240
(°C)
(%)
-25…50/ 50k/
non-
6.5-60 > 92
13.5-
75/65
100k
-25…50/ 50k/
5
isolated
non-
< 10
90
75/65
5
isolated
< 10
> 92
100k
OTi operating range (non-isolated)
OTi 60/220-240/550 D LT2 L
OTi 90/220-240/1A0 LT2 L
Voltage [V]
250
200
150
100
50
0
200
400
600
800
1000
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OTi 90/220-240/1A0 LT2 L:
Voltage: 54–240 V
Current: 250–1000 mA
8
* For details on our guarantee requirements, go to
www.osram.com/guarantee
** Operation at max. Tc -10 K, maximum failure rate of 10 %
*** At corresponding Tc temperature, maximum failure rate of 10 %
OPTOTRONIC® Linear | OTi
9
OPTOTRONIC® Linear | OT FIT
OT
FIT
OPTOTRONIC® FIT
High efficiency and maximum reliability
EL
5
Product features
— Two product families:
— 3 output currents to be set (OT FIT CS L – current setting)
— Fixed output current (OT FIT D L – direct current)
— Suitable for class I luminaires
— Lifetime of up to 100 000 hours** and high ambient
temperature of up to +50 °C
— Overtemperature, overload and short-circuit protection
as well as open-circuit-proof
— Low ripple of output current (< 10 at 100 Hz (%)) for a
higher quality of light (e.g. no flickering on video recording)
— Suitable for emergency lighting systems with central
battery according to IEC 61347-2-13
Year
OSRAM
Guarantee*
OPTOTRONIC® FIT (OT FIT) driver
Technical data
Product
Product
LxWxH
Iout
Uout
Pout
Eff. max. Ta/ Tc
Iout accur. Isolation
Ripple at
reference
OT FIT 35/220-
number
(mm)
(mA)
500/600/
(V)
(W)
(%)
(°C)
(h)***
-25…50/
(%)
100 Hz (%)
240/700 CS L
4052899032828 280x30x21 700
800/925/
27-54
13-35
≥ 86
75/65
50k/100k
10
SELV
<7
OT FIT 50/220240/1A0 CS L
4052899032804 280x30x21 1050
27-54
50k/100k
10
SELV
<7
50k/100k
10
SELV
<7
50k/100k
10
OT FIT 80/220240/1A6 CS L
OT FIT 30/220240/125 D L
4052899222571 210x30x21 250
OT FIT 50/220240/350 D L
23-55
≥ 86
4052899222595 210x30x21 350
75/65
-25…50/
27-54
32-83
≥ 87
544052899222557 210x30x21 125
OT FIT 50/220240/250 D L
-25…50/
1200/1400/
4052899032781 360x30x21 1550
Lifetime
75/65
-15...50/
216
6.8-27 ≥ 90
75/65
54-
13.5-
-15...50/
216
54
54-
18.9-
150
52.5
≥ 90
75/65
non-
75/65
< 10
non50k/100k
10
-15...50/
≥ 90
isolated
isolated
< 10
non50k/100k
10
isolated
< 10
* For details on our guarantee requirements, go to
www.osram.com/guarantee
** Operation at max. Tc -10 K, maximum failure rate of 10 %
*** At corresponding Tc temperature, maximum failure rate
of 10 %
10
OPTOTRONIC® Linear | OT FIT
Multiple current setting
Each OT FIT CS L driver offers three selectable currents.
The main advantage of multiple current setting is the reduction
of the number of different product versions in the warehouse.
Furthermore, steps between currents are kept small, avoiding
any need for LED drivers with intermediate currents.
OT FIT CS L operating range (SELV)
OT FIT 35/220-240/700 CS L
OT FIT 50/220-240/1A0 CS L
OT FIT 80/220-240/1A6 CS L
Voltage [V]
40
Features of the current setting
— CS (current setting) of OT FIT offers the easiest way to
choose the output currents without the need for resistors
and to avoid typical mistakes when using DIP switches
— Each product offers at least one typical current used in
the market and will give you the possibility to reduce the
current when LEDs will become even more efficient
25
10
0
500
1000
1500
2000
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OT FIT 50/220-240/1A0 CS L:
Voltage: 27–54 V
Current: 800/925/1050 mA
OT FIT D L operating range (non-isolated)
OT FIT 30/220-240/125 D L
OT FIT 50/220-240/250 D L
OT FIT 50/220-240/350 D L
Voltage [V]
150
100
50
0
100
200
300
400
Current [mA]
For detailed data, please see product data sheet (www.osram.com)
Example:
OT FIT 50/220-240/350 D L:
Voltage: 54–150 V
Current: 350 mA
11
OPTOTRONIC® Linear | System solutions
System solutions with OSRAM
OPTOTRONIC® drivers and LED modules
OSRAM always offers you the perfect match of light source and driver
PrevaLED® Linear Slim 2
PrevaLED® Linear Value 2
PrevaLED® Linear Value 1
PrevaLED® Area Value
PrevaLED® Bar Value
Optimum lighting does not only depend on the performance of the single components but
also on the clever combination of these components to create a unique system solution. By
combining OPTOTRONIC® Linear drivers with PrevaLED® modules from OSRAM, you can
rest assured that you have found the perfect match for your lighting solution.
OSRAM OPTOTRONIC® drivers in combination with OSRAM
LED modules offer you unique added value:
— Perfect system match, tested by OSRAM
— Just one provider for your lighting system
The following applies to all OSRAM LED modules:
— Parallel connection to SELV drivers
— Series connection to non-isolated drivers
Regarding the clearances and creepage distances, OSRAM
SELV modules (< 54 V) are accordingly designed for series
connection (< 250 V).
Typical wiring example:
XsYp " X series Y parallel " Input from one side
Yp
Xs
OPTOTRONIC® Linear | System solutions
PLVG1-Bar-2200-8xx-560x48-DC
PrevaLED® Bar Value
PLVG1-Bar-1100-8xx-280x48-DC
PLVG1-Ar-4500-8xx-530x530-DC
PrevaLED® Area Value
PLVG1-Ar-1100-8xx-270x270-DC
PLVZ1-LIN-2200-8xx-560-DC
PLVZ1-LIN-1300-8xx-560-DC
PLVZ1-LIN-1100-8xx-280-DC
PrevaLED® Linear Value 1
PLVZ1-LIN-650-8xx-280-DC
PLVZ2-LIN-2200-8xx-560-DC
PLVZ2-LIN-1300-8xx-560-DC
PLVZ2-LIN-1100-8xx-280-DC
PrevaLED® Linear Value 2
PLVZ2-LIN-650-8xx-280-DC
PLSZ2-LIN-4000-8x0-560-DC
PLSZ2-LIN-2200-8x0-560-DC
PLSZ2-LIN-2000-8x0-280-DC
PLSZ2-LIN-1100-8x0-280-DC
PrevaLED® Linear Slim 2
+
PLSZ2-LIN-650-8x0-280-DC
System combinations OPTOTRONIC® – PrevaLED®
SELV
OTi DALI 35/220-240/700 LT2 L
OTi DALI 50/220-240/1A4 LT2 L
OTi DALI 80/220-240/1A6 LT2 L
OTi DALI 80/220-240/2A1 LT2 L
OT FIT 35/220-240/700 CS L
OT FIT 50/220-240/1A0 CS L
OT FIT 80/220-240/1A6 CS L
Non-isolated
OTi DALI 60/220-240/550 D LT2 L
OTi DALI 90/220-240/1A0 LT2 L
OTi 60/220-240/550 D LT2 L
OTi 90/220-240/1A0 LT2 L
OT FIT 35/220-240/125 D L
OT FIT 50/220-240/250 D L
OT FIT 50/220-240/350 D L
Detailed information on specific combinations (series/parallel) and resulting lumen packages, power levels and system
efficacies can be found in the “Matchmaker” at www.osram.com/oem-download. The corresponding wiring options and
wiring diagrams are specified in the respective product data sheets.
13
OPTOTRONIC® Linear | System solutions
System solutions with OSRAM
OPTOTRONIC® drivers and light
management systems (LMS)
For higher levels of efficiency, flexibility and customization
Combining OSRAM OPTOTRONIC® LED drivers and light
management systems (LMS) allows you to create unique
lighting solutions that offer plenty of benefits to your customers. Your flexibility during projects is increased tremendously
as the LMS provide a simple way to address OTi DALI LED
drivers for easy dimming and setting of the desired lighting
level. And the best thing about it: You also save huge amounts
of energy. With LMS from OSRAM, you will always find the
ideal solution – for various applications, luminaires and
customer demands.
Touch DIM® LS LI and LS/PD LI sensor
OPTOTRONIC® and Touch DIM®
The Touch DIM® functionality, integrated in all
OTi DALI LED drivers, is as easy as it gets. Via
standard pushbuttons, up to 20 OTi DALI LED
drivers can be manually dimmed and switched in
a convenient way and a scene can be stored – all
without the need for a controller. Moreover, with
special Touch DIM® light and presence sensors,
which can be connected directly to the OTi DALI
LED drivers, energy savings of more than 50 %
can be achieved.
14
OPTOTRONIC® Linear | System solutions
DALIeco® Control unit and PC configuration software
OPTOTRONIC® and DALIeco® Control – configuration by mouse click
With the DALIeco® Control unit for up to 32 OTi DALI LED drivers, you can increase comfort
and energy efficiency of your lighting in no time at all. No matter if used for a single luminaire
or luminaire group, in individual or open-plan offices, corridors or production and storage
areas – with the multi-functional DALIeco® Control, individual function profiles can be set up by
a few mouse clicks and transmitted via remote control at the push of a button. Purely manual
control or a time sequence control can be realized just as easy as the convenient automation by
presence and light sensors.
DALI PRO CONT-4 RTC controller
DALI PRO Touch Panel
DALI LS/PD LI sensor
DALI HIGHBAY
ADAPTER
OPTOTRONIC® and DALI PROFESSIONAL
The combination of OPTOTRONIC® LED drivers and DALI PROFESSIONAL is the perfect
choice for anyone looking for maximum flexibility in the control of a larger number of luminaires, groups or scenes. With just one controller, up to 256 OTi DALI LED drivers can be
controlled in 4 x 16 groups via 4 DALI lines. In addition, up to 50 sensors or pushbutton
couplers can be connected to the DALI line. Via DALI SWITCH SO switch actuators, nondimmable OT FIT LED drivers can also be integrated. DALI PROFESSIONAL offers a flexible
configuration: Changes can be made quickly and conveniently at all times via a free PC software – without the need for rewiring. Thanks to the wide choice of user interfaces and sensors as well as an integrated real-time clock, DALI PROFESSIONAL is suitable for industrial
buildings and warehouses and also for office spaces with single and open-plan offices.
15
For more information, please go to:
—
—
—
—
—
—
OPTOTRONIC®: www.osram.com/optotronic
Light management systems: www.osram.com/lms
PrevaLED®: www.osram.com/prevaled
Tuner4TRONIC®: www.osram.com/t4t
LEDset: www.osram.com/ledset
News: www.osram.com/oem
OSRAM GmbH
Head office:
Marcel-Breuer-Strasse 6
80807 Munich, Germany
Phone +49 89 6213-0
Fax
+49 89 6213-2020
www.osram.com
400W049GB 04/15 Subject to change without notice. Errors and omissions excepted.
www.osram.com/optotronic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement