DMC-S DigitalMedia 8G Fiber Input Card for DM Switchers

DMC-S DigitalMedia 8G Fiber Input Card for DM Switchers
DMC-S
DigitalMedia 8G™ Fiber Input Card for DM® Switchers
>> Modular input card for a DM-MD8X8, DM-MD16X16, or
DM-MD32X32 switcher
>> Provides a single DM 8G® Fiber input
>> Supports cable lengths up to 1000 ft (300 m) using
CresFiber® 8G, or 500 ft (150 m) using other multimode fiber [1]
>> Handles video resolutions up to Full HD 1080p
>> Handles computer resolutions up to WUXGA
>> Handles 3D video and Deep Color
>> Handles Dolby® TrueHD, DTS-HD®, and uncompressed
7.1 linear PCM audio
>> HDCP compliant
>> Includes an HDMI® output for pass-through of the input signal
>> Includes a stereo analog line-level audio output with
volume control [2]
>> Allows extraction of stereo 2-channel audio signals
>> Occupies a single DM® switcher input card slot
>> Provides a rack-mountable DM 8G Fiber receiver solution using
the optional DMCI card interface [3]
The DMC-S is an input card designed for use with any card-based
Crestron® DigitalMedia™ Switcher. It provides one DM 8G® Fiber input,
with complementary HDMI® pass-through and analog audio outputs. The
DM 8G Fiber input enables the connection of a DM 8G Fiber transmitter,
or the output of another DM® switcher, using a single strand of
multimode fiber.[1]
NOTE: Refer to model DMC-S-DSP for use with surround sound sources.
DigitalMedia 8G™ Fiber
Engineered for ultra high-bandwidth and ultimate scalability, DigitalMedia
8G Fiber (DM 8G Fiber) provides a true one-wire lossless transport for
moving high-definition video, audio, Ethernet, and control signals over
multimode fiber. DM 8G Fiber handles uncompressed Full HD 1080p video
signals with support for HDCP, Deep Color, 3D, and high-bitrate 7.1 audio,
as well as computer signals up to WUXGA. All signals are transported over
one strand of multimode fiber, supporting distances up to 1000 feet
(300 m) using CresFiber® 8G, or 500 feet (150 m) using other multimode
fiber optic cable.[1]
HDMI® Pass-Through
Every DM switcher input card includes an HDMI output port, which can be
used to pass the input signal through to a local audio processor or video
monitor, or to feed a second DM switcher for output expansion purposes.
Audio Extracting
The DMC-S also includes an unbalanced analog audio output, allowing
stereo audio signals to be extracted from the digital input and fed to a
multiroom audio distribution system. The output volume is adjustable via
a control system using a keypad, touch screen, handheld remote, or
mobile device.[2]
crestron.com
| 800.237.2041
NOTE: For applications requiring the simultaneous distribution of multichannel surround sound and 2-channel stereo audio signals, use model
DMC-S-DSP.
Standalone DM 8G Fiber Receiver
In addition to its use as an input card for DM switchers, the DMC-S may
also be used with the DMCI DigitalMedia Card Interface[3] to provide a
DM 8G Fiber receiver solution that’s perfect for installation in an equipment
rack or AV cart, or as a portable display interface.
To configure a DM switcher complete with input and output cards,
cables, and other peripherals, please use the online DigitalMedia
Switcher Configuration Tool.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
SPECIFICATIONS
Video
Input Signal Types: DM 8G® Fiber w/Deep Color & 3D
Output Signal Types: HDMI® w/Deep Color & 3D (DVI compatible [4])
Input Resolutions, Progressive: [email protected], [email protected]
(480p), [email protected] (576p), [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected] (720p50), [email protected]
(720p60), [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected] (1080p24),
[email protected] (1080p25), [email protected] (1080p50),
[email protected] (1080p60), [email protected], [email protected],
[email protected], plus any other resolution allowed by HDMI up to
165MHz pixel clock
DMC-S DigitalMedia 8G™ Fiber Input Card for DM® Switchers
Input Resolutions, Interlaced: [email protected] (480i), [email protected]
(576i), [email protected] (1080i25), [email protected] (1080i30), plus
any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
MODELS & ACCESSORIES
Audio
Available Accessories
Input Signal Types: DM 8G Fiber
Output Signal Types: HDMI (multichannel pass-through from input),
analog stereo (2-channel pass-through from input [2])
Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, LPCM up to 8 channels
Analog Formats: Stereo 2-channel
Digital-To-Analog Conversion: 24-bit 48 kHz
Analog Performance: Frequency Response: 20Hz to 20kHz ±0.5dB;
S/N Ratio: >95dB, 20Hz to 20kHz A-weighted;
THD+N: <0.005% @ 1kHz;
Stereo Separation: >90dB
Analog Volume Adjustment: -80dB to 0dB
CRESFIBER8G-NP: CresFiber® 8G Multimode Fiber Optic Cable, 50/125 x4
breakout, non-plenum
CRESFIBER8G-P: CresFiber® 8G Multimode Fiber Optic Cable, 50/125 x4
breakout, plenum
CRESFIBER-CONN-SC50UM-12: Connectors for CresFiber® 8G Multimode
Fiber Optic Cable, SC 50µm, 12-Pack
CRESFIBER-TK: CresFiber® Termination Kit
CRESFIBER-SINGLE-SC-P: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum
CBL Series: Crestron® Certified HDMI® Interface Cable
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
DMCI: DigitalMedia™ Card Interface
Communications
Notes:
DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet
HDMI: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management
of CEC between the connected HDMI device and a control system
Connectors
HDMI OUT: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[4]
DM IN MMF/SC: (1) SC female optical fiber connector;
DM 8G Fiber input;
Connects to the DM 8G Fiber output of a DM transmitter or other DM
device via CRESFIBER8G multimode fiber optic cable[1]
AUDIO OUT: (2) RCA female;
Unbalanced stereo line-level audio output[2];
Output Impedance: 100 Ohms nominal;
Maximum Output Level: 2 Vrms
Indicators
DM IN MMF/SC: (1) green LED, indicates DM link status
Construction
Available Models
DMC-S: DigitalMedia 8G™ Fiber Input Card for DM® Switchers
1. The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using
Crestron CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using Crestron legacy
CRESFIBER, Crestron CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode fiber
optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system
design guidelines. All wire and cables are sold separately.
2. The analog stereo audio output is only active when the input source is outputting a 2-channel
stereo signal. For applications using a multichannel surround sound source, use model DMCS-DSP which provides simultaneous surround sound and stereo downmix output signals.
3. Item(s) sold separately.
4. DVI is supported via the HDMI output using a suitable adapter or interface cable. CBL-HD-DVI
interface cables are available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, CresFiber, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or
other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of
Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD
Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States
and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks
of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.
Plug-in card, occupies (1) DM switcher input card slot, includes metal
faceplate w/black finish
Weight
8.0 oz (227 g)
|
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
All brand names, product names and trademarks are the property of their respective owners.
©2015 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 10/06/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement