ACUBRITE™ 23 SS
Manual
ACUBRITE™ 23 SS
Manual
Introduction.......................................................................................... 2
ACUBRITE™ 23 SS
Hardware Installation .......................................................................... 2
The Display Timing.............................................................................. 5
Stainless Steel Chassis 23" LCD Display
The Display Outline Dimensions......................................................... 6
The Display Controls .......................................................................... 7
Manual
The Screen Adjustment ...................................................................... 8
Quick Installation &Troubleshooting Tips ......................................... 15
Specification .......................................................................................17
Product Safety Precautions
.......................................................... 17
Acura Embedded Systems Inc.
th
Unite #1,7711-128 Street,
Surrey,BC V3W 4E6, Canada
Tel : 1-866-502-9666
Fax: 604-502-9668
Technical Support:
[email protected]
Content
Page 1
ACUBRITE™ 23 SS
Manual
ACUBRITE™ 23 SS
Manual
The following picture provides the connection outline
Introduction
Welcome to enjoy the fantastic sightseeing world. This new technology will bring you
the whole new feeling about the “monitor”.
We show here some of the major
advantages of the LCD monitor. You will really find some other advantages when you
use it.
Hardware Installation
This chapter will guide you the correct installation procedures of your LCD monitor.
Unpacking
After you unpack your LCD Monitor, please make sure that the following items are
included in the carton and in good condition. If you find that any of these items are
damaged or missing, please contact your dealer immediately.
One LCD Monitor
15-pin D-sub VGA cable
AC/DC adapter with 12V DC output & AC power cord
Remote Control
TV Tuner (Option)
VGA Input Pin Assignment
This section describes the pin assignment of the LCD’s VGA connector. It is called
15pin Mini D-sub connector.
Installation
This analog LCD display does not require any special drivers. Necessary drivers are
supplied by the video card manufacturer and may be found on the diskettes supplied
with the video card that came with your computer. Windows 98/2000/XP drivers for
both the display and the video card are supplied on the Windows 98/2000/XP CD or
diskettes. Unfortunately, Microsoft did not provide a complete listing of the displays on
the initial retail release. You may use the standard XGA (1024x768) as the display type.
The video card must also be set up correctly in Windows 98/2000/XP and make sure
the video output of the VGA card is on list in Section 6.1 or check your Video Card
manual or Windows 98/2000/XP Read me file for further information on Video Card.
After the question listed above is solved, we continue the setup procedure as below.
1. Turn power off both Computer and Display before making any connection.
2. Install Display on the solid horizontal surface such as a table or desk.
3. Connect the power cable and the AC/DC adapter, then connect adapter
toe the back of the LCD monitor.
4. The LCD monitor comes with a 15-pin video cable; you may use this cable
for both IBM PC’s & compatibles and Macintosh.
5. Tighten the screws of the Display cable until the connectors are fastened
securely.
6. Switch on power to the Computer system, then to the monitor.
Page 2
Page 3
ACUBRITE™ 23 SS
Manual
ACUBRITE™ 23 SS
Manual
The Display Outline Dimensions
Unit: mm
The Display Timing
Applicable video timing
The following table lists the better display quality modes that the LCD monitor provides.
If the other video modes are input, the monitor will stop working or display
unsatisfactory picture quality.
Page 6
Page 5
ACUBRITE™ 23 SS
Manual
ACUBRITE™ 23 SS
Manual
The Display Controls
The Down Key < and Up Key > are used to scroll through items within the menu. The
selected item is highlighted as the scrolling move along. The SELECT key is used to
activate the highlighted item. During this state, MENU key is used to close the OSD
menu from the screen.
OSD Control Key
Power key : Power ON/OFF.
Menu key : Enter the main menu of the on-screen display (OSD) .
Down key : Decrease item number or item value when OSD is on.
Decrease volume gain when OSD is off.
Up key : Increase item number or value of the selected item when .
Increase volume gain when OSD is off.
Select key : Activate the selected icon or function.
Source key : Input source select (PC).
OSD Key Lock Function
To prevent unauthorized adjustment on OSD menu, ACUBRITE™ 23 SS has a special
key lock function.
1. Press "volume up" & "volume down" keys simultaneously for 3 seconds, the power
led should turn into orange color and blinking for 3 times. The OSD has been locked.
2. Do the same procedure again to release the lock.
3. While OSD is locked, you should still be able to change the OSD with your remote
controller.
The Screen Adjustment
Main Menu
You can adjust the brightness, contrast, display colors, the horizontal and vertical
position of the display and OSD menu, etc. through the main menu display.
Page 7
Page 8
ACUBRITE™ 23 SS
Manual
• OSD Control Function List
Main Menu
Press “Up” or “Down” to locate the item you desire to change, then press “Select” to
make the adjustment, press “Menu” again to go back to previous menu.
Picture Adjust This item can adjust Auto Adjust, Brightness, Contrast,
Pixel Clock,Phase,H-Position and V-Position for an
optimal image.
Color
This item can select 9300/6500 color temperature or
adjust USER color.
Audio
This item can adjust audio function, as Volume, Mute,
Treble, Base, Balance.
SYSTEM
This item can Select Source input (PC) and Recall
System data.
OSD
This item can control OSD window function.As OSD HPosition, OSD V-Position, OSD Transparence and OSD
Off time.
LANGUAGE This item can Select Language (English or Chinese).
•
Picture Adjust
Auto Adjust
Brightness
Contrast
Clock
Phase
•
Automatically adjusts H-Position, V-Position, Pixel Clock
and Phase for an optimal image.
Press “Select” to execute.
Adjusts the Brightness.
Press “Up” or “Down“ to adjust the parameter.
Adjusts the difference between the light and dark areas.
Press “Up” or “Down“ to adjust the parameter.
Adjusts the video distortion. It will appear horizontal noise
on the screen while adjust the Clock.
Press “Up” or “Down“ to adjust the parameter.
Adjusts the video distortion. It will appear vertical noise
Press “Up” or “Down“ to adjust the parameter.
Moves the display picture. Horizontal Position
Press “Up” to the right or press “Down“ to the left.
Moves the display picture. Vertical Position
Press “Up” to the up or press “Down“ to the down.
Color
ACUBRITE™ 23 SS
9300K
6500K
User
Red
Select 9300 color temperature. Press “Select” to execute.
Select 6500 color temperature. Press “Select” to execute.
Select USER color temperature. Press “Select” to execute .
Adjust gain of the Red color
Press “Up” or “Down“ to adjust the parameter.
Green Adjust gain of the Green color
Press “Up” or “Down“ to adjust the parameter.
Blue
Adjust gain of the Blue color
Press “Up” or “Down“ to adjust the parameter.
•
Audio
Vo l u m e Adjust Volume gain
Press “Up” to increase or press “Down“ to decrease.
Mute
Set Audio mute.
Press “Up” to execute mute or Press “Down“ to release mute.
Treble
Adjust audio Treble .
Press “Up” to increase or press “Down“ to decrease.
Bass
Adjust audio bass .
Press “Up” to increase or press “Down“ to decrease.
Balance
Input source select.
Press “Up” to right or press “Down“ to left.
•
System
Recall
Restore the default value.(The value according to the factory
mode) Press “Select” to execute.
Source Input source select. (PC, AV, S-Video, TV, Component)
Press “Select” to execute..
•
OSD
OSD H-Position
OSD V-Position
OSD Transparence
Off Time
Page 9
Manual
Adjusts the OSD position left or right
Press “Up” to right, press “Down“ to left.
Adjusts the OSD position up or down
Press “Up” to up, press “Down“ to down.
Adjusts the OSD transparency.
Press “Up” or “Down“ to adjust the parameter.
Adjusts the OSD exit time.
Press “Up” or “Down“ to adjust the parameter.
Page 10
ACUBRITE™ 23 SS
Image Adjust
Audio
System
OSD
Manual
This item can adjust video color as Brightness,
Contrast, Saturation Hue, Sharpness.
This item can adjust audio function. As Volume,
Mute, Treble, Base, Balance .
This item can Select Source input (PC,) and
Recall System data .
This item can control OSD window function. As OSD
H-Position,OSD V- Position, OSD Transparence
and OSD Off time .
ACUBRITE™ 23 SS
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Manual
Plug one terminal of the VGA cable to the signal connector at the
rear of the LCD Monitor.
Plug the other terminal of the VGA cable to the signal connector at
the rear of PC.
Plug Adapter output to the jack at the rear of LCD Monitor.
Plug the Power cord to the Adapter.
Connect the Power cord to power outlet.
Turn on the LCD Monitor and PC.
All functions adjustment are same as PC mode
In the event that you experience trouble with your Display, check the following items
before contacting the dealer from whom the Display was purchased. The most
common problems usually involve an incorrectly an incorrect connection from the Video
Card to the Display. We recommend that you also consult your Video Card User’s
manual during the Troubleshooting Procedure. Do not exceed the maximum refresh
rate recommended for the display.
Quick Installation & Troubleshooting Tips
Please follow the following descriptions step by step.
(The 6 diagrams can also be your references):
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6
Page 11
Page 12
ACUBRITE™ 23 SS
Manual
ACUBRITE™ 23 SS
Manual
Do not install this display near a motor or transformer where strong magnetism is
generated. Images on the display will become distorted and the color
irregular.
Specification
Do not allow metal pieces or objects of any kind fall into the display from ventilation
holes.
Do not attempt to service this unit yourself. Removal of the display cover may expose
you to dangerous voltage or other risks. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel in the event that:
1. Liquid is spilled into the product or the product is exposed to rain or water.
2. The product does not operate normally when the operating instructions
are followed.
3. The product has been dropped or the cabinet has been damaged.
4. The product exhibits a distinct change in performance, indicating a need
for service.
5. Power cord or plug is damaged or frayed.
General specifications for the LCD
The following items are neither defects nor failures.
Response time, luminance and color gamut may be changed by ambient temperature.
The LCD may be seemed luminance uniformity, flicker, vertical seam and/or
small spot by display patterns.
Product Safety Precautions
Follow all warnings and instructions marked on the product.
Do not use this product near water.
This display should be installed on a solid horizontal base.
When cleaning, use only a neutral detergent cleaner with a soft damp cloth.
Do not spray with liquid or aerosol cleaners.
Do not expose this display to direct sunlight or heat. Hot air may cause
damage to the cabinet and other parts.
Adequate ventilation must be maintained to ensure reliable and continued operation
and to protect the display from overheating. Do not block ventilation slots and openings
with objects or install the display in a place where ventilation may be hindered.
This display should be operated from the type of power source indicated on
the AC/DC adapter.
Page 13
Optical characteristics ( e.g. luminance, display uniformity, etc. ) gradually
is going to change depending on operating time, and especially low
temperature, because the LCD has cold cathode fluorescent lamps.
ACUBRITE™ 23 SS
Manual
With the unique set of products, Acura Embedded Systems remains committed to its
goal of providing trouble-free and customer-friendly service. A special customer
service unit has been set up specifically to cater to our esteemed customers' needs.
Technical Support:
For technical support contact your Salesperson
[email protected]
Mailing address:
Acura Embedded Systems Inc.
Unit #1, 7711-128th Street, Surrey, BC V3W 4E6, CANADA
Ph: (604) 502-9666 Fax: (604) 502-9668
Toll Free 1-866-502-9666
ACUBRITE™ 23 SS
Manual
">
