Product List -pdf
Picture
2005.09.08 14:41
Cat / Part #
Part Number
Description
21-1000
1000
System 1 ● Single-door Access Control System ● 250 users, 50 event buffer, 3 time schedules, forced entry, door
ajar, request-to-exit, serial printer output, non-volatile EEPROM ● 1 main relay, 1 aux relay ● Program with built-in
keypad & LED display or full duplex RS232 using PC or VDT ● Keypad, bar code, magnetic stripe, 30-bit Weigand, 30
bit prox, data chip ● Requires 48-4301 for data chip ● Includes transformer, mounting hardware, 50' eight
conductor wire ● Does not support 26-bit cards ● Cabinet: 9' W x 12" H x 4.5" D (229mm x 305mm x 114mm)
22-2003
2003
System 2 ● Single-door Access Control System ● On-site programming w/built-in keypad ● RS-232 port for local
programming & monitoring w/VDT or PC or printing ● Up to 424 users per panel ● 8 time schedules, anti-passback,
temp users, holidays, door ajar, forced entry, emergency drop inputs, request-to-exit input, zone input● 1 main
relay, 1 aux relay & 1 voltage output ● Supports keypads, data chip, 26 & 30-bit Wiegand & proximity, mag stripe or
bar code ● Call Corby to purchase 2nd door option ● Upgradeable to networked System 2000 ● 54-8021 RS-232 to
Ethernet Adapter available ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
22-2016
2016
System 2 ● Two-door Access Control System ● Expandable to 16 doors ● On-site programming w/ built-in keypad
● RS-232 port for local or remote programming & monitoring w/ VDT or PC or printing ● 2700>4090 users per
panel, 16 time schedules, anti-passback, temp users, holidays, door-ajar, forced-entry, time-cancel, emergency drop
inputs, request-to-exit inputs, zone inputs ● 2 main relays, 2 aux relays & 2 voltage outputs ● Supports keypads,
data chips, 26 & 30-bit Wiegand & proximity, mag stripe or bar code ● Upgradeable to networked System 2000 ●
54-8021 RS-232 to Ethernet Adapter available ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
22-2018
2018
Data Chip Programming Wand - System 2 ● Use to program data chips into any System 2 Access Control
System ● The wand plugs into a RJ-11 jack connection on the system motherboard ● Metal contact surface at head
of probe guides data chip for quick & easy enrollment ● Wand handle made from lightweight, durable plastic ●
Compatible w/ iButton ● 3' (1m) cable with RJ-11 plug ● Wand: 0.75" Dia x 4" L (19mm x 102mm)
25-4000
4000
System 5 Full-Featured ● Master Access Control System panel ● Supports 4 doors ● Expand to 8 doors by
adding a 25-4009 Slave panel ● 750 users, 64 time zones, 16 holidays, 250 event buffer, door-ajar, request-to-exit,
forced entry, relay time-cancel, anti-passback, RS-232 output ● 4 main relays & 1 aux relay ● Supports keypads,
data chips (requires 54-4301 for data chip), 26 & 30-bit Wiegand & proximity, mag stripe or bar code (requires 544141 for card technologies) ● Can program w/ a VDT or PC ● Includes serial printer, video display terminal, 52-4020
keypad, backup/restore CD-ROM, battery & transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x
114mm)
25-4005
4005
System 5 Partial-Featured ● Same as full-featured System 5, but does not include the video display terminal or
serial printer ● See part #25-4000 for full system details ● Usually used with existing PC for programming & printing
● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
25-4009
4009
System 5 Expansion Panel ● Also called a "slave" control unit ● Connects to a master panel (25-4000) via 3
shielded wires ● Increases total system capacity to 8 doors, 8 zones and 1 aux ● All functions of the slave panel are
the same as the master, except the master is used for all programming functions ● Telecommunications Board (414021) not included nor required with slave expansion panel ● Includes battery and transformer ● Cabinet: 11" W x
15.5" H x 4.5" D (279mm x 394mm x 114mm)
26-4405
4405
System 10 Door Port Module (DPM) ● 1 DPM is required for each 4 Doors ● Expandable to 32 DPMs or 128
doors ● 4 main relays and 1 aux relay ● Supports 2000 users, 8 time schedules, 64 time zones, 16 holidays, RS-232
output, door ajar, forced entry, relay time cancel, request-to-exit, zone monitoring, anti-passback● Supports
keypads, data chips (requires 54-4301 for data chip), 26 & 30-bit Wiegand, 26 & 30-bit proximity, magnetic stripe,
bar code (requires 54-4141 for cards technologies) ● Requires: 26-4450 PC, 26-4406 digi board, 26-4410 software
● Includes battery, transformer, surge protector ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
26-4406
4406
Communications Board for System 10 ● Four (26-4406) boards can be installed for the full compliment of 32
DPMs & 128 doors ● Includes 8-channel cable, micropeeper RS-232 LED monitor/troubleshooter, null modem,
software ● 4.75" W x 8.437" L x 0.75" H (95mm x 215mm x 19mm )
26-4407
4407
Communications Board for System 10 ● Board only ● Does not include 8-channel cable ● Four (26-4406)
boards can be installed for the full compliment of 32 DPMs & 128 doors ● 4.75" W x 8.437" L x 0.75" H (95mm x
215mm x 19mm )
26-4409
4409
8-Channel Cable ● Cable assembly only ● Use with 26-4406 or 26-4407 System 10 communcations board
1 of 19
2005.09.08 14:41
26-4410
4410
System 10 Software ● MS-DOS-based software required to program DPM (26-4405) via System 10 PC (26-4450)
● Software only runs on DOS 6.2 or greater ● Dual communicating software sends commands to panel (DPM) &
receives event updates from panels for storage to hard drive ● Used for programming, communications, recording
of events, generating customized reports & administrating data base ● Includes hardware & software manuals &
disks
26-4440
4440
System 10 Computer - Tower ● Tower with keyboard only ● Does not include monitor or communications board
● Replacement parts for System 10 PC 26-4450 ● 90-day warranty ● Tower: 7.3" W x 16.7" L x 18.3" H (185mm x
424mm x 465mm)
26-4441
4441
System 10 Computer - Monitor ● Monitor only ● Does not include keyboard ● Replacement parts for System 10
PC 26-4450 ● Monitor: 19" W x 18" L x 17" D (483mm x 457mm x 432mm)
26-4450
4450
System 10 Computer ● Mini-Tower with keyboard, MS-DOS, floppy drive, 17" color monitor ● Supports 128
doors ● Requires 26-4406 communciations board & 26-4410 software ● CORBY can preload software & install digi
board ● Also available loaded with system 5 software @ customer's request ● 90-day warranty ● Tower: 7.3" W x
16.7" L x 18.3" H (185mm x 424mm x 465mm) Monitor: 19" W x 18" L x 17" D (483mm x 457mm x 432mm)
28-2000
2000
System 2000 ● Windows®-based Access Control System ● Includes Network Interface Controller (NIC) &
software ● Requires PC for programming & at least one control panel (28-2025) for access control ● PC
communicates with NIC via serial port ● NIC communicates with all control panels via four RS-485 channels ● Each
channel communicates with up to 31 panels for a total of 248 doors ● Includes battery, transformer, loopback
tester, serial cable ● See sales sheet for complete list of features, maximum users & compatible products ● Cabinet:
9" W x 12" L x 4.5" D (229mm x 305mm x 114mm)
28-2017
2017
Data Chip Programming Wand - System 2000 ● Use to program data chips into the System 2000 PC ● This
wand is identical to the 22-2018 but includes a RJ-11>RS232/serial adapter ● PC must have an available serial port
● Metal contact surface at head of probe guides data chip for quick & easy enrollment ● Wand handle made from
lightweight, durable plastic ● Compatible w/ iButton ● 3' (1m) cable with RJ-11 plug ● Wand: 0.75" Dia x 4" L
(19mm x 102mm)
28-2025
2025
Control Panel - System 2000 ● See part #28-2000 for full system details ● Complete hardware support for 2
doors, 2 main relays, 2 aux relays, 2 voltage outputs, emergency drop inputs, request-to-exit inputs and zone inputs
● Terminal inputs support all card technologies, data chips and keypads ● Fail-safe distributed system ● Includes
battery and transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm)
31-4079
4079
Proximity Reader - 26-Bit - Classic ● Indoor-Outdoor ● Reads 26-bit Class IM cards up to 5" (127mm) under
ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● One of our most popular readers ●
Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby
System 1 ● Will retrofit to classic-style Wiegand sized swipe readers ● Does not read 30-bit UltraSecure™ Class IM
cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 2.3" x 5.3" x 0.8" (58mm x 135mm x 20mm)
[Classic]
31-4080
4080
Proximity Reader - 26-Bit - Mullion Style ● Indoor-Outdoor ● Slim-line, fits most narrow door frames ● Reads
26-bit Class IM cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ●
Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible
with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black only ● 1.7" x 5.5" x 0.7"
(43mm x 140mm x 17mm) [Legacy]
31-4081
4081
Proximity Reader - 26-Bit - Wall Plate Size ● Indoor-Outdoor ● Reads 26-bit Class IM cards up to 4" (100mm)
under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● Use only with 26-bit Class IM
cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not read 30-bit
Class IM UltraSecure™ cards ● Color: black ● Size: Standard wall plate size ● 3" x 4.5" x 0.7" (76mm x 114mm x
17mm) [Legacy]
31-4082
4082
Proximity Reader - 26-Bit - Mid-Range ● Indoor-Outdoor ● Reads most 26-bit Class IM cards up to 12"
(305mm) under ideal conditions ● Flex Pass System ● 4-14VDC ● Tri-color LED ● Audio tone ● Use only with 26-bit
Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Does not
read 30-bit Class IM UltraSecure™ cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 5.1" x 6.1" x
1.1" (130mm x 155mm x 28mm) [Arch]
31-4083
4083
Proximity Reader - 26-Bit - Long-Range ● Indoor-Outdoor ● Reads most 26-bit Class IM cards up to 28"
(711mm) under ideal conditions ● Flex Pass System ● 12VDC @ 1.2A ● 24VDC @ 900mA ● Oversized tri-color LED
● Audio tone ● Use only with 26-bit Class IM cards ● Works with Corby Systems 2, 4, 5, 10 & 2000 ● Not
compatible with Corby System 1 ● Does not read 30-bit Class IM UltraSecure™ cards ● Color: black only ● 11.2"
x11.2" x 1.8" (282mm x 284mm x 46mm) [Arch]
2 of 19
2005.09.08 14:41
31-4085
4085
Proximity Card - 26-Bit ● Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works with Corby
Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit readers cannot
read this card ● Rugged, long-wearing design ● Pre-punched slot makes it easy to hang from lanyard or key
retractor ● Credit Card size: 2.13" x 3.38" x 0.065" (54mm x 86mm x 2mm)
31-4086
4086
Proximity Keyfob - 26-Bit ● Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works with Corby
Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit readers cannot
read this card ● Rugged, double-sealed construction ● Long-wearing design ● Small, lightweight & easy to use ●
Built to withstand harsh operating environments ● Re-enforced hole ensures years of use ● Dimensions: 1.197" x
1.725" x 0.215" (30mm x 44mm x 5mm)
31-4087
4087
Proximity Card - 26-Bit - Photo ID ● Class IM card ● Use ONLY with any Class IM 26-bit prox reader ● Works
with Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● Class IM UltraSecure™ 30-bit
readers cannot read this card ● Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm)
32-4177
4177
Proximity Reader - UltraSecure™ 30-Bit - Classic ● Indoor-Outdoor ● Reads 30-bit Class IM UltraSecure™
cards up to 5" (127mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio tone ● One
of our most popular readers ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2,
4, 5, 10 & 2000 ● Will retrofit to classic-style Wiegand sized swipe readers ● Does not read 26-bit Class IM cards ●
Color: black ● Also available: gray, white, beige (S.O.) ● 2.3" x 5.3" x 0.8" (58mm x 135mm x 20mm) [Classic]
32-4178
4178
Proximity Reader - UltraSecure™ 30-Bit - Mullion Style ● Indoor-Outdoor ● Slim-line, fits most narrow door
frames ● Reads 30-bit Class IM UltraSecure™ cards up to 4" (100mm) under ideal conditions ● Flex Pass System ●
4-16VDC ● Tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby
Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black only ● 1.7" x 5.5" x 0.7" (43mm
x 140mm x 17mm) [Legacy]
32-4179
4179
Proximity Reader - UltraSecure™ 30-Bit - Wall Plate Size ● Indoor-Outdoor ● Reads 30-bit Class IM
UltraSecure™ cards up to 4" (100mm) under ideal conditions ● Flex Pass System ● 4-16VDC ● Tri-color LED ● Audio
tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does
not read 26-bit Class IM cards ● Color: black ● Size: Standard wall plate size ● 3" x 4.5" x 0.7" (76mm x 114mm x
17mm) [Legacy]
32-4180
4180
Proximity Reader - UltraSecure™ 30-Bit - Mid-Range ● Indoor-Outdoor ● Reads most 30-bit Class IM
UltraSecure™ cards up to 12" (305mm) under ideal conditions ● Flex Pass System ● 4-14VDC ● Tri-color LED ●
Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ●
Does not read 26-bit Class IM cards ● Color: black ● Also available: gray, white, beige (S.O.) ● 5.1" x 6.1" x 1.1"
(130mm x 155mm x 28mm) [Arch]
32-4181
4181
Proximity Reader - UltraSecure™ 30-Bit - Long-Range ● Indoor-Outdoor ● Reads most 30-bit Class IM
UltraSecure™ cards up to 28" (711mm) under ideal conditions ● Flex Pass System ● 12VDC @ 1.2A ● 24VDC @
900mA ● Oversized tri-color LED ● Audio tone ● Use only with 30-bit Class IM UltraSecure™ cards ● Works with
Corby Systems 1, 2, 4, 5, 10 & 2000 ● Does not read 26-bit Class IM cards ● Color: black only ● 11.2" x11.2" x 1.8"
(282mm x 284mm x 46mm) [Arch]
32-4190
4190
Proximity Card - UltraSecure™ 30-Bit ● Class IM card ● Use ONLY with any Class IM UltraSecure™ 30-bit prox
reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 26-bit readers cannot read this card ● Rugged, longwearing design ● Pre-punched slot makes it easy to hang from lanyard or key retractor ● Credit Card size: 2.13" x
3.38" x 0.065" (54mm x 86mm x 2mm)
32-4192
4192
Proximity Keyfob - UltraSecure™ 30-Bit ● Class IM card ● Use ONLY with any Class IM UltraSecure™ 30-bit
prox reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 26-bit readers cannot read this card ● Rugged,
double-sealed construction ● Long-wearing design ● Small, lightweight & easy to use ● Built to withstand harsh
operating environments ● Re-enforced hole ensures years of use ● Dimensions: 1.197" x 1.725" x 0.215" (30mm x
44mm x 5mm)
32-4194
4194
Proximity Card - UltraSecure™ 30-Bit - Photo ID ● Class IM card ● Use ONLY with any Class IM UltraSecure™
30-bit prox reader ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Class IM 26-bit readers cannot read this
card ● Credit Card size: 2.12" x 3.38" x 0.03" (54mm x 86mm x 1mm)
33-4302
4302
Data Chip Reader ● Indoor ● Flush mount ● One 12VDC green LED with 6" (152mm) flying leads ● Standard size
aluminum single-gang plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long
lasting read head with 12" (304mm) leads ● Compatible with iButton ● 2.75" W x 4.5" L x 1" D (70mm x 114mm x
25mm)
3 of 19
2005.09.08 14:41
33-4303
4303
Data Chip Reader ● Indoor ● Flush mount ● One each 12VDC green and red LEDs with 6" (152mm) flying leads ●
Standard size aluminum single-gang plate bearing the classic Corby logo ● Annodized scuff and scratch resistant
finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 4.5" W x 2.75" L x 1" D
(114mm x 70mm x 25mm)
33-4304
4304
Data Chip Reader ● Indoor ● Flush mount ● One 12VDC green LED with 6" (152mm) flying leads ● Standard size
aluminum mullion sized plate bearing the classic Corby logo ● Annodized scuff and scratch resistant finish ● Long
lasting read head with 12" (304mm) leads ● Compatible with iButton ● 1.375" W x 3.125" L x 1" D (35mm x 79mm
x 25mm)
33-4305
4305
Data Chip Reader ● Indoor ● Flush mount ● One each 12VDC green and red LEDs with 6" (152mm) flying leads ●
Standard size aluminum mullion sized plate bearing the classic Corby logo● Annodized scuff and scratch resistant
finish ● Long lasting read head with 12" (304mm) leads ● Compatible with iButton ● 1.375" W x 3.125" L x 1" D
(35mm x 79mm x 25mm)
33-4306
4306
Data Chip Reader ● Read head only ● 12VDC Green LED included ● Low profile ● Single hole mounting 0.315" Dia
(8 mm) ● Perfect for OEM applications or special small footprint installations ● 6" (152mm) data wires attached ●
Compatible with iButton ● 0.83" Dia x 0.40" H (21mm x 10mm)
33-4307
4307
Data Chip Reader ● Indoor/outdoor ● Surface mount ● One 12VDC bi-color LED ● High impact black ABS plastic
mullion sized housing ● Virtually indestructable ● Corrosion-proof ● Long lasting back-lit read head with 12"
(304mm) leads ● Compatible with iButton ● 1.5" W x 4" L x 1" D (38mm x 102mm x 25mm).
33-4318
4318
Data Chip ● For System 2 or 2000 ● Can be mounted to badges, photo ID cards or any smooth surface ● Nearly
indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial
number ● Use our 33-4323 tape dots to securely attach the chips to any desired surface ● Not for use with Systems
1, 4, 5, 10 & single-door readers ● 0.642" Dia x 0.126" Thick (15mm x 2mm)
33-4319
4319
Data Chip and Key Fob ● For System 2 or 2000 ● Nearly indestructible ● Ultra high security ● Cannot be copied
or cloned ● Each chip has a unique internal 64-bit serial number ● Chip is securely mounted on a rugged stainless
steel key fob with Corby logo ● Custom logos available ● Not for use with Systems 1, 4, 5, 10 & single-door readers
● Chip: 0.642" Dia x 0.126" Thick (15mm x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x .38mm)
33-4320
4320
Data Chip and Key Fob ● Use with Corby Systems 1, 4, 5, and 10 and all single-door readers ● Special batch
codes ensure proper operaton with these systems ● Nearly indestructible ● Ultra high security ● Cannot be copied
or cloned ● Each chip has a unique internal 64-bit serial number ● Mounted on a rugged stainless steel key fob with
Corby logo ● Custom logos available (S.O.) ● Not for use with Systems 2 and 2000 ● Chip: 0.642" Dia x 0.126"
Thick (15mm x 2mm), Fob: 0.82" W x 2" L x 0.015" Thick (20mm x 50mm x .38mm)
33-4321
4321
Data Chip ● For use with all Corby Systems 1, 4, 5, 10, & single-door readers ● Secure mount to badges, photo ID
cards or any smooth surface ● Special batch codes ensure proper operation with these systems ● Nearly
indestructible ● Ultra high security ● Cannot be copied or cloned ● Each chip has a unique internal 64-bit serial
number ● Use our 33-4323 tape dots to securely adhere the chips to any desired surface ● 0.642" Dia x 0.126"
Thick (15mm x 2mm)
33-4322
4322
Data Chip - Keytag ● Stainless steel keytag with etched Corby logo ● Use with 33-4318, 33-4321 or 33-4331 data
chips ● Requires 33-4323 tape dot ● Pre-punched hole for affixing to key ring ● Custom logos available (S.O.) ● 2" x
0.7" (51mm x 18mm)
33-4323
4323
Data Chip - Tape Dots ● Use to adhere our 33-4318, 33-4321 or 33-4331 data chips to any desired surface ●
Acrylic adhesive foam with double sided peel-off paper ● Good for general bonding at elevated temperatures ●
Hundreds of uses possible ● Provided on a roll of 100 pieces ● 0.6" dia x 0.063" Thick (15mm x 2mm)
33-4324
4324
Data Chip - Plastic Tag Holder ● For use with our 33-4331 Thick Cannister Data Chip ● Black ● Secures the chip
without tape or adhesives ● Chip inserts and snaps into the holder ● Pre-punched hole for affixing to key ring ●
Angled design for easy presentation to reader ● Durable and weather resistant ● 1.5" W x 0.75" L x 0.25" Thick (19
mm x 38mm x 6mm)
4 of 19
2005.09.08 14:41
33-4331
4331
Data Chip - Thick Cannister ● For System 2 or 2000 ● Nearly indestructible ● Ultra high security ● Cannot be
copied or cloned ● Each chip has its own internal and unique 64-bit serial number● Thick-style metal cannister ●
Use our 33-4323 tape dots to securely adhere the chips to any desired surface ● Fits our 33-4324 Data Chip Tag
Holder ● Not for use with Systems 1, 4, 5, 10 & single-door readers ● 0.642" dia x 0.188" Thick (16mm x 5mm)
34-4151
4151
Bar Code Card ● Use with all Corby systems ● Must use swipe reader 34-4160 ● Corby graphics on front of the
card ● CODE 39 bar code and 17-digit decimal number are printed on rear ● Red "anti-copy" shield is printed over
the bar code ● Durable & reliable ● Credit card size ● 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x 1mm)
34-4152
4152
Bar Code Labels ● Encoded, self-stick bar code labels ● Can be attached to any card type to add bar code
technology ● 39 per sheet ● Minimum order: 1 sheet
34-4160
4160
Bar Code Reader ● Indoor/Outdoor ● Easy vertical or horizontal surface mount ● Durable polycarbonate design ●
Bi-directional decoding allows card swiping in either direction ● Clock and data format ● Use with all Corby Systems
● Reads standard CODE 39 bar code format ● Bi-color LED ● Reads Corby Card 34-4151 ● Color: Black ● 1.7" W x
5.05" L x 1.54" H (43mm x 128mm x 39mm)
35-4073
4073
Magnetic Stripe Card ● Plain white ● Full-length magnetic stripe with ABA Track II encoding on rear● Five-digit
hot stamped number on each card represents digits six through ten within the sixteen total numbers encoded●
Works with all Corby systems using the 35-4075 reader ● Rugged and long-wearing design ● Non-photo ID ●
Custom logo and printing available (SO) ● Credit card size ● 2.125" W x 3.375" L x 0.031" Thick (54mm x 86mm x
1mm)
35-4074
4074
Magnetic Stripe Card ● Use with 35-4075 reader ● Corby Logo ● ABA Track II encoding ● Five-digit code number
hot stamped on card will not wear off ● Rugged long-wearing design ● Credit card size ● Dimensions: 2.125" W x
3.375" L x 0.031" Thick (54mm x 86mm x 1mm)
35-4075
4075
Magnetic Stripe Reader ● Beige ● Indoor/Outdoor ● Easy vertical or horizontal surface mount ● Textured
powder-coated finish ● Treated with anti-corrosion film ● Die cast metal casing ● Clock and data format ● Use with
all Corby Systems ● Reads standard ABA Track II cards ● Bright dual LED indicator ● 1.95" W x 5.5" L x 1.3" H
(50mm x 140mm x 33mm).
36-4166
4166
Proximity Keyfob - UltraSecure™ 30-Bit ● Class H card ● Use ONLY with Class H readers 36-4173, 36-4174,
36-4175, 36-4176 ● Durable ● Reliable ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● 0.9" W x 1.9" L x 0.16"
Thick (23mm x 48mm x 4mm)
36-4167
4167
Proximity Card - UltraSecure™ 30-Bit ● Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 364175, 36-4176 ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● Non Photo-ID ● HID logo ● Rugged, longwearing design ● Pre-punched slot makes it easy to hang from a lanyard or key retractor ● Credit card size: 3.385"
W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4168
4168
Proximity Card - UltraSecure™ 30-Bit - Photo ID ● Class H card ● Use ONLY with Class H readers: 36-4173,
36-4174, 36-4175, 36-4176 ● Accepts most computer generated images using dye-sublimation process ● Use with
Corby Systems1, 2, 4, 5, 10, & 2000 ● HID logo ● Rugged, long-wearing design ● Credit card size: 3.385" W x
2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4169
4169
Proximity Micro Tag - 26-Bit ● Class H card ● Use ONLY with Class H readers 36-4173, 36-4174, 36-4175, 364176 ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● Self-sticking, small
disk-shaped Lexan transponder ● Easy, cost-effective way to turn a plastic ID badge into a proximity credential ●
Coin-sized tag attaches to any non-metallic material ● Weight: 0.04 oz (1.18g) ● 1.28" x 0.07" (33mm x 2mm)
36-4170
4170
Proximity Keyfob - 26-Bit ● Class H card ● Use ONLY with Class H readers 36-4173, 36-4174, 36-4175, 36-4176
● Durable ● Reliable ● Use with Corby Systems 2, 4, 5, 10, & 2000 ● May also work with other manufacturer's
systems ● Not compatible with Corby System 1 ● 0.9" W x 1.9" L x 0.16" Thick (23mm x 48mm x 4mm)
5 of 19
2005.09.08 14:41
36-4171
4171
Proximity Card - 26 bit ● Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 36-4175, 36-4176 ●
Use with Corby Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● Non Photo-ID ● HID logo ●
Rugged long-wearing design ● Pre-punched slot makes it easy to hang from a lanyard or key retractor ● Credit card
size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4172
4172
Proximity Card - 26 bit - Photo ID ● Class H card ● Use ONLY with Class H readers: 36-4173, 36-4174, 364175, 36-4176 ● Accepts most computer generated images using dye-sublimation process ● Use with Corby
Systems 2, 4, 5, 10, & 2000 ● Not compatible with Corby System 1 ● HID logo ● Rugged long-wearing design ●
Credit card size: 3.385" W x 2.135" L x 0.075" Thick (86mm x 54mm x 2mm)
36-4173
4173
Proximity Reader - Extended Range ● Indoor-Outdoor ● Will read most 26 and 30-bit cards from 27" (685mm)
under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work
with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader● Color: dark gray ●
12" W x 12" L x 1" Thick (305mm x 305mm x 25mm)
36-4174
4174
Proximity Reader - Medium Range ● Indoor-Outdoor ● Will read most 26 and 30-bit cards from 9" (228mm)
under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work
with other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader● Color: dark gray ● 5"
W x 5" L x 1" Thick (127mm x 127mm x 25mm)
36-4175
4175
Proximity Reader - Thin Line ● Indoor-Outdoor ● Will read most 26 and 30-bit cards from 4" (101mm) under
ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5, 10, & 2000 ● May also work with
other manufacturer's systems that accept a generic 26-bit Wiegand input from a reader ● Color: beige ● 4.7" W x 3"
L x 0.68" Thick (119mm x 76mm x 17mm)
36-4176
4176
Proximity Reader - Mullion Style ● Indoor-Outdoor ● Slim-line, fits most door frames ● Will read most 26 and
30-bit cards from 5" (127mm) under ideal conditions ● Use with Class H cards ● Use with Corby Systems 1, 2, 4, 5,
10, & 2000 ● May also work with other manufacturer's systems that accept a generic 26-bit Wiegand input from a
reader ● Color: dark gray ● 6" W x 1.7" L x 1" Thick (152mm x 43mm x 25mm)
37-4201
4201
Proximity Reader - Mullion Style ● Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit
UltraSecure™ cards up to 4" (102mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Size fits
narrow door frames ● Use with Corby Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's
systems ● Ivory & black trim plates included ● 1.5" W x 3" L x 0.5" Thick (38mm x 76mm x 12mm)
37-4203
4203
Proximity Reader - Single-Gang ● Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit
UltraSecure™ cards up to 5" (127mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Use with
Corby Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's systems ● Ivory & black trim plates
included ● 3" W x 4.5" L x 0.38" Thick (76mm x 114mm x 10mm)
37-4204
4204
Proximity Reader - Mid-Range ● Indoor-Outdoor ● Will read most generic 26-bit cards and 30-bit UltraSecure™
cards up to 14" (356mm) under ideal conditions ● Use with Class F cards ● Surface mount ● Use with Corby
Systems 1, 2, 4, 5, 10 & 2000 ● May also work with other manufacturer's systems ● Cost effective mid-range reader
for hands-free performance ● Ivory & black trim plates included ● 6" W x 8.5" L x 1" Thick (152mm x 216mm x
25mm)
37-4215
4215
Proximity Card - 26-Bit ● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with
Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● May also work with other manufacturer's
systems ● Pre-punched vertical badge slot ● 2.2" W x 3.4" L x 0.06" Thick (55mm x 86mm x 1.5mm)
37-4218
4218
Proximity Keyfob - 26-Bit ● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable ● Works with
Corby Systems 2, 4, 5, 10 & 2000 ● Not compatible with Corby System 1 ● May also work with other manufacturer's
systems ● 1.2" W x 1.5" L x 0.15" Thick (29mm x 36mm x 4mm)
37-4219
4219
Proximity Card - UltraSecure™ 30-Bit ● Class F card ● Use ONLY with any Class F reader ● Durable ● Reliable
● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Pre-punched vertical badge slot ● 2.2" W x 3.4" L x 0.06" Thick
(55mm x 86mm x 1.5mm)
6 of 19
2005.09.08 14:41
37-4220
4220
Proximity Card - UltraSecure™ 30-Bit - Photo ID ● Class F card ● Use ONLY with any Class F reader ●
Durable ● Reliable ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Accepts most computer generated images
using dye-sublimation process ● White, glossy finish ● 2.12" x 3.38" x 0.031" (54mm x 86mm x 1mm)
37-4222
4222
Proximity Keyfob - UltraSecure™ 30-Bit ● Class F card ● Use ONLY with any Class F reader ● Durable ●
Reliable ● Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● 1.2" W x 1.5" L x 0.15" Thick (29mm x 36mm x 4mm)
38-4042
4042
Wiegand Reader ● Beige ● Surface mount ● Indoor & outdoor swipe style ● Bi-color LED indication ● Use with
Wiegand technology swipe cards ● Molded high-impact plastic enclosure ● Rugged and waterproof ● Installation
finishing decals included ● 2.3" W x 5.3" L x 1.7" H (58mm x 135mm x 43mm)
38-4044
4044
Wiegand Reader ● Black ● Surface mount ● Indoor & outdoor swipe style ● Bi-color LED indication ● Use with
Wiegand technology swipe cards ● Molded high-impact plastic enclosure ● Rugged and waterproof ● Installation
finishing decals included ● 2.3" W x 5.3" L x 1.7" H (58mm x 135mm x 43mm)
38-4045
4045
Wiegand Swipe Card - 26-Bit ● Credit card size ● Durable ● Works with all Corby systems except System 1 ●
May also work with other manufacturer's systems ● Use with readers 38-4042 & 38-4044 ● 5" W x 3.375" L x
0.037" Thick (43mm x 86mm x 1mm)
38-4049
4049
Wiegand Swipe Card - UltraSecure™ 30-Bit ● Credit card size ● Durable ● Reliable ● Works with all Corby
systems ● Each card has its own unique non-duplicatable number ● Use with readers 38-4042 & 38-4044 ● 2.125"
W x 3.375" L x 0.037" Thick (43mm x 86mm x 1mm)
38-4076
4076
Wiegand Key Token - 26-Bit ● Use only with the 38-4077 Wiegand Sensorkey reader ● Works with Corby
Systems 2, 4, 5, 10 & 2000 and most other systems that accept the generic 26-bit format ● Not compatible with
Corby System 1 ● Color: black ● 1" W x 3.2" L x 0.92" Thick (25mm x 83mm x 2.3mm)
38-4077
4077
Wiegand Sensorkey Reader ● Miniature insertion reader ● Low profile, in-the-wall reader ● 5-12 VDC ● Reads
38-4076 & 38-4078 Wiegand key tokens ● Color: black ● Also available: chrome (S.O.) ● 1.62" L x 1.50" W x 2" D
(41mm x 38mm x 51mm)
38-4078
4078
Wiegand Key Token - UltraSecure™ 30-Bit ● Use only with the Corby 38-4077 Wiegand Sensorkey reader ●
Works with Corby Systems 1, 2, 4, 5, 10 & 2000 ● Color: black ● 1" W x 3.2" L x 0.92" Thick (25mm x 83mm x
2.3mm)
38-4149
4149
Wiegand Card - UltraSecure™ 30-Bit ● Graphics quality ● Both sides printable using dye sublimation process ●
Use with readers 38-4042 or 38-4044 ● High security 30-bit encoding format works with all Corby systems ●
Durable ● Reliable ● Each card has its own unique non-duplicatable number ● Credit card size ● 2.125" W x 3.375"
L x 0.031" Thick (54mm x 86mm x 1mm)
39-4057
4057
Badge Clip ● Metal lapel clip with vinyl snap strap ● Ideal for photo ID cards ● 25 per pack ● 3.5" (89mm)
39-4097
4097
Punch Tool ● Heavy-duty hand-held slot punch tool ● Punch vertical or horizontal slots in applicable proximity,
Wiegand, bar code or mag stripe cards ● Use with 39-4057 badge clips
7 of 19
2005.09.08 14:41
41-1008
1008
System 1 Motherboard ● This PCB is a direct replacement for all versions of the Corby System 1 ● It fits into the
current & old style cabinet ● This board only outputs a 9600 Baud rate for the printer or PC ● 6.75" W x 5.6" L x
1.2" H (172mm x 142mm x 30mm)
41-2021
2021
System 2 Motherboard ● Replacement for one-door System 2 (22-2003) ● Fits into the existing System 2
cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm)
41-2024
2024
System 2 Motherboard ● Replacement for two-door System 2 (22-2016) ● Fits into the existing System 2
cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm)
41-2028
2028
System 2000 Control Panel Motherboard ● Replacement for two-door 28-2025 ● Fits into the existing System
2000 Control Panel cabinet and 98-4058 ● 8" W x 10.5" L x 1.3" H (203mm x 267mm x 33mm)
41-2030
2030
System 2000 Network Interface Card ● Replacement board for 28-2000 ● Fits into the existing NIC cabinet or
98-4059 replacement cabinet ● 5.75" W x 6.75" L x 1.3 " H (146mm x 171mm x 33mm)
41-4021
4021
Telecommunications Board ● Daughter board plugs onto the main control board ● Allows full RS-232 send &
receive communications with Systems 4, 5, & 10 ● Additional RS-232 port for on-site printer audit trail ● Provides
RS-232 port for modem and PC communications for reporting and programming ● 2.5" W x 4.3" L x 0.5" H (64mm
x 109mm x 13mm)
41-4028
4028
System 4 Motherboard ● Master Control Unit (MCU) ● Fits into an exisitng System 4 steel cabinet or our part 984058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm)
41-4029
4029
System 5 Motherboard ● Master Control Unit (MCU) ● Replacement board for 25-4000 and 25-4005 ● Fits into
an existing System 5 steel cabinet or our part 98-4058 ● Does not include 41-4021 telecommunications daughter
board ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm)
41-4030
4030
System 4 & System 5 Expansion Board ● Slave Control Unit (SCU) ● Replacement board for 25-4009 ● Fits
into an existing slave control unit steel cabinet or our part 98-4058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25
mm)
41-4031
4031
System 10 Motherboard ● Door Port Module (DPM) ● Replacement board for 26-4405 ● Fits into an existing
System 10 steel cabinet or our part 98-4058 ● 8" W x 10.5" L x 1" H (203mm x 267mm x 25 mm)
51-4100
4100
Video Display Terminal ● 14" amber monochrome screen ● 101 key ASCII Keyboard ● Controls any device using
a RS-232 console connection ● Use with systems 1, 2 or 5 with direct connection via RS-232 cable ● Perfect for long
term monitoring of systems ● NOTE: This is not a computer and is not capable of preforming backup functions ●
12.7" W x 13.2" L x 12.3" D (323mm x 335mm x 312mm)
52-4012
4012
System Keypad - Outdoor ● Standard-Size Keypad ● Surface mount, aluminum housing w/ spring-loaded
cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes 4000 Series
control board (see 52-4016 for all function specifications) ● Includes a rear-mount sealing gasket ● Surface mounts
easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x 4.6" L x 0.875" D (71mm x 117mm x
22mm)
8 of 19
2005.09.08 14:41
52-4014
4014
System Keypad - Hidden View ● Indoor model ● Single-gang, surface mount housing ● Standard-size keypad ●
Red and green 12VDC LEDs (see 81-0043 & 81-0044) ● Front tamper switch installed ● Keypad mounted in
recessed tray for secure code entry ● Includes 4000 Series control board (see 52-4016 for all function
specifications) ● 3" W x 4.625" L x 2.8" D ( 76mm x 17mm x 71mm)
52-4016
4016
4000 Series Control Board ● Replacement circuit board ● Plugs on rear of all Corby 4000 series keypads (524012 through 52-4066) ● Converts keypad decimal output to BCD format ● Use only with Corby Systems 1, 2, 4, 5,
10 & 2000 ● Includes two 6" (152mm) quick-connect wire harnesses ● 1.6" W x 2.3" L x 0.5" H (41mm x 58mm x
13mm)
52-4020
4020
System Keypad - Indoor ● Single-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red and
green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 4000 Series control board (see 52-4016 for all function
specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 0.4" D (53mm x 40mm x
10m)
52-4064
4064
System Keypad - Lock-Box ● Outdoor model ● Large, cast metal heavy-duty keypad ● Mounted in a secure,
locked enclosure w/ hinged, vandal-resistant, stainless steel face plate● Red and green built-in 12VDC LEDs ●
Includes 4000 Series control board (see 52-4016 for all function specifications) ● Includes lock and key set ● Easily
mounts on an optional 97-4061 gooseneck pedestal ● 4.75" W x 5.3" L x 5.5" D (120mm x 133mm x 145mm)
52-4066
4066
System Keypad - Outdoor ● Large Heavy-Duty Keypad ● Weather-resistant, cast metal mounted in custom
plate ● Red and green built-in 12VDC LEDs ● Includes 4000 Series control board (see 52-4016 for all function
specifications) ● Includes a sealing gasket ● Surface mounts easily with an optional 95-0014 tamper-proof back box
● 3.23" W x 5" L x 0.4" D (84mm x 127mm x 10mm)
53-2032
2032
Cable Null Modem ● 9-pin female > 9-pin female ● For programming System 2 with a PC ● Use with 22-2003 or
22-2016 System 2 panels
53-3666
3666
Cable ● Custom cable ● Use to connect a 41-4021 telecommunicaions board to a System 5 PC ● 12' (4m)
54-2019
2019
USB > RS232/Serial DB9 Adapter ●
54-4056
4056
Line Extender Module (LEM) ● Use with any Corby or non-Corby card reader that outputs a Wiegand or clock &
data format ● Solves extended wiring run challenges ● Each LEM requires 12VDC @ 1.2 amp and extends the
output data an additional 500' (152m) ● Three are required for a wire run of 2000' (610m) ● An additional 12VDC
power supply 92-4094 is needed every 2000' (610m) ● 1.7" W x 3.375" L x 0.562" H (43mm x 86mm x 14mm)
54-4068
4068
Zone Reporter Module (ZRM) ● Provides real time zone monitoring with history reports ● Retrofits to Corby
Systems 4, 5, or 10 ● Each monitored point is identified as a user code on the access control system ● Follows
access system programming as any other user ● Hundreds can be installed on one system ● Operates on 12VDC ●
2" W x 3.25" L x 0.5" H (51mm x 83mm x 13mm)
54-4141
4141
Reader Interface Module (RIM) ● Enables System 5 or System 10 to use card reader technology ● Translates
card reader outputs into a format understood by the system ● Works with 26 & 30-bit Wiegand & proximity as well
as bar code and magnetic stripe cards ● Reader connects to RIM and requires a 12VDC @ 1 amp power suppy such
as Corby 92-4094 ● Small size allows for mounting inside of system cabinet ● 2.3" W x 3.44" L x 1" H (58mm x
87mm x 25mm).
54-4301
4301
Data Chip Adapter Module ● For Systems 1, 4, 5 or 10 ● Enables these legacy systems to use modern data chip
(iButton) technology ● Installs between system panel and any read head ● Stores a maximum of 30 different data
chip batch numbers ● Translates data chip information into legacy BCD format ● Works only with these data chips:
33-4320 and 33-4321 ● Requires 12VDC @ 250 ma ● 2" W x 3.25" L x 1" H (51mm x 83mm x 25mm)
9 of 19
2005.09.08 14:41
54-8021
8021
RS-232 to Ethernet Network Adapter ● Works with Systems 1, 2, 5 & 2000 ● Allows system programming
through a computer network ● Retrofits many other serial-based devices ● IP addressable ● Configures with easy
web-based interface ● Program systems from anywhere in the world ● Extends the range of serial connection to
unlimited distances ● 0.9" W x 2.5" L x 3.5" H (23mm x 64mm x 114mm)
55-4118
4118
Short Haul Modem ● Extends RS-232 communications up to 1 mile ● Use with System 2 and other devices using
RS-232 communications and hardware flow control ● Direct 4-wire connection eliminates need for PSTN phone
modem ● One modem is required on each end of the communication link ● 2.1" W x 3.8" L x 1" H (64mm x 97mm x
25mm)
55-4120
4120
Modem ● Use with System 5 control panel ● Establishes communications between System 5 control panel and PC
or VDT ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4121
modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm)
55-4121
4121
Modem ● Use with System 5 PC or VDT ● Establishes communications between System 5 PC or VDT and control
panel ● High quality commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4120
modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm)
55-4122
4122
Communications Kit ● Includes modem and 41-4021 telecommunications board ● Use with System 10 DPM ●
Establishes communications between System 10 DPM and PC ● High quality commercial modem ● Robust error
correction and line filtering ● Requires Corby 55-4123 modem to complete communication ● 6.375" W x 10.3" L x
1.337" H (162mm x 261mm x 34mm)
55-4123
4123
Modem ● Use with System 10 PC ● Establishes communications between System 10 PC and DPM ● High quality
commercial modem ● Robust error correction and line filtering ● Requires Corby 55-4122 modem to complete
communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm)
55-4125
4125
Short Haul Modem ● Extends RS-232 communications up to 1 mile ● Use with Systems 1, 5, 10 or any other
device using RS-232 communications and no flow control ● Direct 4-wire connection eliminates need for PSTN
phone modem ● One modem is required on each end of the communication link ● 2.1" W x 3.8" L x 1" H (64mm x
97mm x 25mm)
55-4126
4126
Modem ● Use with System 1 or 2 PC or VDT ● Establishes communications between System control panel and PC
or VDT ● High quality commercial modem ● Robust error correction and line filtering ● Requires a second Corby 554126 modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm)
55-4127
4127
Modem ● Use with System 2000 PC or NIC ● Establishes communications between System 2000 NIC and PC ●
High quality commercial modem ● Robust error correction and line filtering ● Requires a second Corby 55-4127
modem to complete communication ● 6.375" W x 10.3" L x 1.337" H (162mm x 261mm x 34mm)
56-3001
3001
Manual - System 1 ● Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections
● Answers to frequently asked questions
56-3002
3002
Manual - System 2 ● Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting sections
● Answers to frequently asked questions
56-3003
3003
Manual - System 2000 - NIC ● Detailed instructions and wiring diagrams ● Includes Self-help and
Troubleshooting sections ● Answers to frequently asked questions
10 of 19
2005.09.08 14:41
56-3004
3004
Manual - System 4/5 ● Detailed instructions and wiring diagrams ● Includes Self-help and Troubleshooting
sections ● Answers to frequently asked questions
56-3010
3010
Manual - System 10 - Installation ● Detailed instructions and wiring diagrams ● Includes Self-help and
Troubleshooting sections ● Answers to frequently asked questions
56-3011
3011
Manual - System 10 - Programming ● Detailed instructions and wiring diagrams ● Includes Self-help and
Troubleshooting sections ● Answers to frequently asked questions
57-4006
4006
Printer - Parallel Port ● For use with any PC that has a DB25 parallel port LPT1 connection● Use with Corby
System 10 (26-4450) to generate custom reports ● 80-132 column dot matrix ● High speed 240 cps draft ● 240 X
216 high resolution ● 8 built-in fonts ● Tractor or friction feed ● Rear or bottom feed ● 9-pin impact prints multiforms ● Black replacement ribbons available (57-4013) ● Ivory ● 5.4" W x 17" L x 12.6" D (136mm x 432mm x
320mm)
57-4007
4007
Printer - Serial Port ● Use with any PC or device that has a DB25 or DB9 RS-232 serial output ● Use with Corby
Systems 1, 2 or 5 ● Has exact same specifications as Parallel Printer (57-4006) ● Black replacement ribbons
available (57-4013) ● Ivory ● 5.4" W x 17" L x 12.6" D (136mm x 432mm x 320mm)
57-4013
4013
Printer Cartridge ● For 57-4006 parallel printer or 57-4007 serial printer ● Package of 4 ● Black ink
58-4035
4035
Request to Exit (RTE) Switch ● Heavy-duty ● Large illuminated palm button with spring-loaded return ● Multielement LED lamp rated @ 12VDC provides illumination ● Mounted on a single-gang plate imprinted with "Push to
Exit" ● One 12VDC green LED (81-0043) with 6" (152mm) wires attached ● Indoor only ● Form Z switch consists of
one set of N.O. contacts and one set of N.C. contacts ● Faceplate: 2.8" W x 4.5" L x 3.5" D (71mm x 114mm x
89mm) ● Button: 1.5" Dia (38mm)
58-4135
4135
Request to Exit Switch ● Large bright red palm button ● Spring-loaded return ● Mounted on a single-gang plate
imprinted with "Push To Exit" ● One 12VDC green LED with flying leads ● Mil Spec Form Z switch consists of one set
of N.O. contacts and one set of N.C. contacts rated at 10 amps @ 24VDC● Long lasting 25,000 duty cycle ●
Faceplate: 2.75" W x 4.5" L x 1.7" H (70mm x 114mm x 43mm) ● Button: 1.25" Dia (317 mm)
59-4022
4022
Wire - Plenum ● Eight conductor, 22 gauge, shielded, non-twisted pairs, gray ● Use for applications requiring low
smoke wiring when installing Systems 1, 2, 4, 5, 10, & 2000 ● 0.25" (6mm) diameter on a spool of 1000' (305m)
59-4023
4023
Wire - Standard ● Eight conductor, 22 gauge, shielded, non-twisted pairs, gray ● Use with Systems 1, 2, 4, 5, 10,
& 2000 ● 0.25" (6mm) diameter on a spool of 1000' (305m)
61-2007
2007
System 2 Upgrade ● RAM ● Use with 22-2003 System 2, single-door system ● This upgrade increases the user
base to 3432 users with names or 6123 users without names ● Easily installed by plugging into existing socket on
circuit board
61-2008
2008
System 2/2000 Upgrade ● 3rd RAM ● Use with 22-2016 System 2 or 28-2025 System 2000 ● Expands user base
to 9,999 users without names ● Easily installed by plugging into existing socket on circuit board
11 of 19
2005.09.08 14:41
61-2020
2020
System 2 Upgrade ● Converts a one-door System 2 to a two-door System 2 (22-2003 to 22-2016) ● Includes
large RAM (61-2007) and EPROM (61-2023) ● Installer must call Corby with System Electronic Serial Number (ESN)
to obtain the new activation code
61-2023
2023
System 2 EPROM ● 32-pin EPROM integrated circuit ● Plugs into existing socket ● Upgrades firmware to current
shipping version
61-2027
2027
System 2 Upgrade ● 32-pin EPROM integrated circuit plugs into existing socket on motherboard ● The new
firmware converts an existing two-door System 2 (22-2016) into a System 2000 control panel (28-2025) ● Only
compatible with motherboards manufactured after January 01, 1998
61-2029
2029
System 2 Upgrade ● 32-pin EPROM integrated circuit and large RAM plug into existing sockets on motherboard ●
The new firmware converts an existing one-door System 2 (22-2003) into a two-door System 2000 control panel
(28-2025) ● Only compatible with motherboards manufactured after January 01, 1998
63-4502
4502
System 4/5 Slave Unit EPROM ● 28-pin EPROM integrated circuit ● Plugs into existing socket ● Upgrades
firmware to current shipping version
63-4504
4504
System 4 EPROM ● 28-pin EPROM integrated circuit ● Plugs into existing socket ● Upgrades firmware to current
shipping version
63-4505
4505
System 5 EPROM ● 28-pin EPROM integrated circuit ● Plugs into existing socket ● Upgrades firmware to current
shipping version
63-4510
4510
System 10 EPROM ● 28-pin EPROM integrated circuit ● Plugs into existing socket ● Upgrades firmware to current
shipping version
63-4511
4511
System 4 and System 4/5 Slave Unit Upgrade ● 28-pin EPROM integrated circuit and 28-pin RAM ● Converts
System 4 MCU or System 4/5 Slave SCU (25-4009) to System 5 MCU (25-4000 or 25-4005) ● Plug into existing
sockets ● Requires 41-4021 telecommunications board
63-4512
4512
System 5 Upgrade ● 28-pin EPROM integrated circuit ● Converts System 5 MCU (25-4000 or 25-4005) to System
10 DPM (26-4405) ● Plugs into existing socket
63-4514
4514
System 4 and System 4/5 Slave Unit Upgrade ● 28-pin EPROM integrated circuit and 28-pin RAM ● Converts
System 4 MCU or System 4/5 Slave SCU (25-4009) to System 10 DPM (26-4405) ● Plug into existing sockets
63-4515
4515
Smart Socket ● 28-pin memory saving device for System 4 or System 5 MCU ● Retains information programmed
into the system if power is lost ● Do not use with System 10
12 of 19
2005.09.08 14:41
71-6500
6500
6500 Series Control Board ● Replacement circuit board ● Plugs on rear of all 6500 series keypads (71-6520
through 71-6571) ● This tiny circuit board supports 165 users, 3, 4, 5 or 6 digit user code, 18 functions fully
programmable from keypad ● 2 relay outputs, 2 voltage outputs ● Request-to-exit, door ajar, forced entry, time
cancel, panic, code lockout, key beep & alarm sounder● 12VDC or 24VDC ● Includes two 6" (152mm) quickconnect wire harnesses ● Can also be used to upgrade existing 7000 series keypads to equivalent 6500 series ● 1.6"
w x 2.3" L x 0.8" H (41mm x 58mm x 20mm)
71-6520
6520
Keypad - Single-Door - Indoor ● Single-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red
and green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 6500 Series control board (see 71-6500 for all function
specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 1.2" D (40mm x 53mm x
30mm)
71-6521
6521
Keypad - Single-Door - Indoor ● Double-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red
and green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 6500 Series control board (see 71-6500 for all function
specifications) ● 4.5" W x 4.56" L x 1.2" D (114mm x 115mm x 30mm)
71-6522
6522
Keypad - Single-Door - Outdoor ● Standard-Size Keypad ● Surface mount, aluminum housing w/ springloaded cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes 6500
Series control board (see 71-6500 for all function specifications) ● Includes a rear-mount sealing gasket ● Surface
mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x 4.6" L x 1.76" D (71mm x
117mm x 45mm)
71-6524
6524
Keypad - Single-Door - Hidden View ● Indoor model ● Single-gang, surface mount housing ● Standard-size
keypad ● Red and green 12VDC LEDs (see 81-0043 & 81-0044) ● Front tamper switch installed ● Keypad mounted
in recessed tray for secure code entry ● Includes 6500 Series control board (see 71-6500 for all function
specifications) ● 3" W x 4.625" L x 2.8" D (17mm x 76mm x 71mm)
71-6530
6530
Keypad - Single-Door - Indoor ● Single-Gang - 3 LEDs ● Flush mount plate ● Standard-size keypad ● Red,
green and yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 6500 Series control board (see 716500 for all function specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 1.2" D
(53mm x 40mm x 30mm)
71-6540
6540
Keypad - Single-Door - Indoor ● Single-Gang - 4 LEDs ● Flush mount plate ● Standard-size keypad ● 1 Red,
1 green and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 6500 Series control board (see 716500 for all function specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 1.2" D
(53mm x 40mm x 30mm)
71-6564
6564
Keypad - Single-Door - Lock-Box ● Outdoor model ● Large, cast metal heavy-duty keypad ● Mounted in a
secure, locked enclosure w/ hinged, vandal-resistant, stainless steel face plate● Red and green built-in 12VDC LEDs
● Includes 6500 Series control board (see 71-6500 for all function specifications) ● Includes lock and key set ●
Easily mounts on an optional 97-4061 gooseneck pedestal ● 4.75" W x 5.3" L x 5.5" D (120mm x 133mm x 145mm)
71-6566
6566
Keypad - Single-Door - Outdoor ● Large Heavy-Duty Keypad ● Weather-resistant, cast metal mounted in
custom plate ● Red and green built-in 12VDC LEDs ● Includes 6500 Series control board (see 71-6500 for all
function specifications) ● Includes a sealing gasket ● Surface mounts easily with an optional 95-0014 tamper-proof
back box ● 3.23" W x 5" L x 0.4" D (84mm x 127mm x 10mm)
71-6571
6571
Keypad - Single-Door - Indoor ● Double-Gang - 7 LEDs ● Flush mount plate with small speaker grill ●
Standard-size keypad ● 1 Red, 1 green & 5 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 6500
Series control board (see 71-6500 for all function specifications) ● 4.5" W x 4.56" L x 1.2" D (114mm x 115mm x
30mm)
72-7020
7020
Keypad - Single-Door - Indoor ● Single-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red
and green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 7000 Series control board (see 72-7100 for all function
specifications) ● Easily mounted in the 95-0011 tamper box ● 2.75" W x 4.5" L x 0.92" D (53mm x 40mm x 24mm)
72-7021
7021
Keypad - Single-Door - Indoor ● Double-Gang - 2 LEDs ● Flush mount plate ● Standard-size keypad ● Red
and green 12VDC LEDs (see 81-0043 & 81-0044) ● Includes 7000 Series control board (see 72-7100 for all function
specifications) ● 4.5" W x 4.56" L x 0.92" D (114mm x 115mm x 24mm)
13 of 19
2005.09.08 14:41
72-7022
7022
Keypad - Single-Door - Outdoor ● Standard-Size Keypad ● Surface mount, aluminum housing w/ springloaded cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes 7000
Series control board (see 72-7100 for all function specifications) ● Includes a rear-mount sealing gasket ● Surface
mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x 4.6" L x 1.5" D (71mm x 117mm
x 38mm)
72-7024
7024
Keypad - Single-Door - Hidden View ● Indoor model ● Single-gang, surface mount housing ● Standard-size
keypad ● Red and green 12VDC LEDs (see 81-0043 & 81-0044) ● Front tamper switch installed ● Keypad mounted
in recessed tray for secure code entry ● Includes 7000 Series control board (see 72-7100 for all function
specifications) ● 3" W x 4.625" L x 2.8" D (17mm x 76mm x 71mm)
72-7030
7030
Keypad - Single-Door - Indoor ● Single-Gang - 3 LEDs ● Flush mount plate ● Standard-size keypad ● Red,
green and yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 7000 Series control board (see 727100 for all function specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 0.92"
D (53mm x 40mm x 24mm)
72-7040
7040
Keypad - Single-Door - Indoor ● Single-Gang - 4 LEDs ● Flush mount plate ● Standard-size keypad ● 1 Red,
1 green and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 7000 Series control board (see 727100 for all function specifications) ● Easily mounted in an optional 95-0011 tamper box ● 2.75" W x 4.5" L x 0.92"
D (53mm x 40mm x 24mm)
72-7064
7064
Keypad - Single-Door - Lock-Box ● Outdoor model ● Large, cast metal heavy-duty keypad ● Mounted in a
secure, locked enclosure w/ hinged, vandal-resistant, stainless steel face plate● Red and green built-in 12VDC LEDs
● Includes 7000 Series control board (see 72-7100 for all function specifications) ● Includes lock and key set ●
Easily mounts on an optional 97-4061 gooseneck pedestal ● 4.75" W x 5.3" L x 5.5" D (120mm x 133mm x 145mm)
72-7066
7066
Keypad - Single-Door - Outdoor ● Large Heavy-Duty Keypad ● Weather-resistant, cast metal mounted in
custom plate ● Red and green built-in 12VDC LEDs ● Includes 7000 Series control board (see 72-7100 for all
function specifications) ● Includes a sealing gasket ● Surface mounts easily with an optional 95-0014 tamper-proof
back box ● 3.23" W x 5" L x 0.4" D (84mm x 127mm x 10mm)
72-7071
7071
Keypad - Single-Door - Indoor ● Double-Gang - 7 LEDs ● Flush mount plate with pre-punched speaker grill ●
Standard-size keypad ● 1 Red, 1 green & 5 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Includes 7000
Series control board (see 72-7100 for all function specifications) ● 4.5" W x 4.56" L x 0.92" D (114mm x 115mm x
24mm)
72-7100
7100
7000 Series Control Board ● Replacement circuit board ● Normally plugs on rear header of all 7000 series
keypads (72-7020 - 72-7071) ● Programs with one 4 or 5 digit user code ● 95,040 possible code combinations ● 624VDC ● Board does not include any switching relays ● It has one 350ma solid-state voltage output that operates
most alarm controls plus Corby modules 94-0022, 25, 78 & 86 ● Also use any 2 buttons of the keypad to control up
to 7 additional devices using one or more 94-0078 or 94-0086 ● 1.6" W x 2.313" L x 0.4" H (41 x 59 x 10mm)
73-7510
7510
Keypad - Platinum Series - Single-Gang ● Surface mount ● Supports 200 users ● Programmable for 4 to 8digit code length ● One programmable Form C relay output ● Code lockout feature ● Add or delete users directly
from the keypad ● Operates on 12VDC, 24VDC, or 12VAC ● Vandal and water resistant ● Resistant to chemicals and
fluids ● Scratch resistant brushed aluminum with anodized finish ● 3.2" W x 5.1" L x 0.75" D (81 x 130 x 19mm)
73-7520
7520
Keypad - Platinum Series - Mullion Size ● Surface mount ● Supports 200 users ● Programmable for 4 to 8digit code length ● One programmable Form C relay output ● Code lockout feature ● Add or delete users directly
from keypad ● Operates on 12VDC, 24VDC, or 12VAC ● Vandal and water resistant ● Resistant to chemicals and
fluids ● Scratch resistant brushed aluminum with anodized finish ● 1.75" W x 7.125" L x 1" D (45mm x 181mm
x25mm)
73-7530
7530
Keypad - Platinum Series - Mullion Mortise Size ● Recessed mount ● Supports 200 users ● Programmable for
4 to 8-digit code length ● One programmable Form C relay output ● Code lockout feature ● Add or delete users
directly from keypad ● Operates on 12VDC, 24VDC, or 12VAC ● Vandal and water resistant ● Resistant to chemicals
and fluids ● Scratch resistant brushed aluminum with anodized finish ● 1.75" W x 7.125" L x 0.25" D (45mm x
181mm x 6mm)
74-4340
4340
Data Chip Reader - Single-Door ● Indoor ● Flush mount ● One 12VDC green LED ● Standard single-gang
aluminum plate with classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with
12" (304mm) leads ● 74-4345 circuit board for 17 users included ● One relay output ● Use with 33-4320 and 334321 data chips only ● Supports request-to-exit ● 12VDC ● Reader: 2.75" W x 4.5" L x 1" Deep (70 mm x 114mm
x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
14 of 19
2005.09.08 14:41
74-4341
4341
Data Chip Reader - Single-Door ● Indoor ● Flush mount ● One 12VDC green and one 12VDC red LED ●
Standard single-gang aluminum plate with classic Corby logo ● Annodized scuff and scratch resistant finish ● Long
lasting read head with 12" (304mm) leads ● 74-4345 circuit board for 17 users included ● One relay output ● Use
with 33-4320 and 33-4321 data chips only ● Supports request-to-exit ● 12VDC ● Reader: 2.75" W x 4.5" L x 1"
Deep (70 mm x 114mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4342
4342
Data Chip Reader - Single-Door ● Indoor ● Flush mount ● One 12VDC green LED ● Standard mullion aluminum
plate with classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read head with 12"
(304mm) leads ● 74-4345 circuit board for 17 users included ● One relay output ● Use with 33-4320 and 33-4321
data chips only ● Supports request-to-exit ● 12VDC ● Reader: 1.375" W x 3.125" L x 1" Deep (35mm x 79 mm x
25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4343
4343
Data Chip Reader - Single-Door ● Indoor ● Flush mount ● One 12VDC green and one red LED ● Standard
mullion aluminum plate with classic Corby logo ● Annodized scuff and scratch resistant finish ● Long lasting read
head with 12" (304mm) leads ● 74-4345 circuit board for 17 users included ● One relay output ● Use with 33-4320
and 33-4321 data chips only ● Supports request-to-exit ● 12VDC ● Reader: 1.375" W x 3.125" L x 1" Deep (35mm
x 79 mm x 25mm), Circuit board: 1.6" W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4344
4344
Data Chip Reader - Single-Door ● Indoor/outdoor ● Surface mount ● One 12VDC bi-color LED ● High impact
ABS plastic mullion housing ● Virtually indestructible ● Long lasting back-lit read head with 12" (304mm) leads ● 744345 circuit board for 17 users included ● One relay output ● Use with 33-4320 and 33-4321 data chips only ●
Supports request-to-exit ● 12VDC ● Reader: 1.5" W x 4" L x 1" Deep (38mm x 102mm x 25mm), Circuit board: 1.6"
W x 2.5" L x 1.25" H (41 mm x 64mm x 32mm)
74-4345
4345
Data Chip Reader - Single-Door - Motherboard ● Replacement board ● One relay output for controlling one
door ● 17 individual users ● Programmable for unlimited user mode for lower security applications ● Use with 334320 and 33-4321 data chips only ● Supports request-to-exit ● Use with all Corby data chip readers ● Operates on
12VDC ● 2.5" W x 1.6" L x 1.25" H (41 mm x 64mm x 32mm)
81-0043
43
LED - Red ● 12-14VDC @ 15ma ● Super bright LED has 6" (152mm) color-coded wires & built-in current limiting
resistor seamlessly molded into a round black plastic body that press fits perfectly into a 0.166" (4mm) hole● Same
as LED used in the 71-6520, 71-6571, 72-7020, etc. ● Ideal for automotive lighting & special projects ● 0.160" Dia x
0.640" L (4 x 16mm) ● Submit RFQ for quantity purchase
81-0044
44
LED - Green ● 12-14VDC @ 15ma ● Super bright LED has 6" (152mm) color-coded wires & built-in current limiting
resistor seamlessly molded into a round black plastic body that press fits perfectly into a 0.166" (4mm) hole● Same
as LED used in our 71-6520, 71-6571, 72-7020, etc. ● Ideal for automotive lighting & special projects ● 0.160" Dia
x 0.640" L (4 x 16mm) ● Submit RFQ for quantity purchase
81-0045
45
LED - Yellow ● 12-14VDC @ 15ma ● Super bright LED has 6" (152mm) color coded wires & built-in current
limiting resistor seamlessly molded into a round black plastic body that press fits perfectly into a 0.166" (4mm) hole
● Same as LED used in the 71-6520, 71-6571, 72-7020, etc. ● Ideal for automotive lighting & special projects ●
0.160" Dia x 0.640" L (4 x 16mm) ● Submit RFQ for quantity purchase
81-0051
51
Bulb ● Incandescent ● 12-14VDC @ 80ma with 6"(152mm) wires ● Average life is 30,000 hours ● This is the
standard Night Light bulb for Corby products 52-4012 71-6522 72-7022 ● Plastic lens cover & black
rubbermounting ring not included ● See item 81-0052 for more info ● 0.25" Dia x 0.313" L (6mm x 8mm) ● Submit
RFQ for quantity purchase
81-0052
52
Lens ● Clear plastic top hat style, mounts in a rubber bushing that snaps into a 0.35" (9mm) hole ● No need for
nuts or washers ● Use w/ 81-0051 ● Rubber bushing size is 0.28" H x 0.43" W (7mm x 11mm) ● Top hat size is
0.26" H x 0.34" W (7mm x 9mm) ● Submit RFQ for quantity purchase
82-0060
60
Keypad - OEM ● 12 button ● Black plastic w/white buttons & black numbers ● Decimal output on the rear header
is pin 1 common, plus 12 other pins ● Gold plated pads, conductive rubber contacts, silicone gasket ● Same as used
with Corby 72-7020 and similar models ● Mounts from front in hole size: 2.1" L x 1.6" W (53mm x 40mm) ●
Header spacing: 0.100" (3mm) ● Keypad: 2.4" L x 1.7" W x .5" H (61mm x 43mm x12mm) ● Submit RFQ for
quantity purchase
82-0066
66
Keypad - OEM ● 12 button ● Extra heavy-duty ● Large, pay telephone type, cast metal buttons ● Decimal output
on the rear header is pin 1 common plus 12 other pins ● Gold plated pads, conductive rubber contacts, silicone
gasket, water resistant ● 2 factory installed LEDs with 6" (152mm) color-coded wires ● 2.4" W x 4" L x .6" H (61mm
x 102mm x 15mm) ● Submit RFQ for quantity purchase
15 of 19
2005.09.08 14:41
82-7120
7120
Replacement Keypad - Indoor ● Single-Gang - 2 LEDs ● NO control board - keypad only ● Replacement
keypad for all Corby 4000, 6500 and 7000 Series units ● Flush mount plate ● Standard-size keypad ● Red and green
12VDC LEDs (see 81-0043 & 81-0044) ● Easily mounted in the 95-0011 tamper box ● 2.75" W x 4.5" L x 0.34" D
(53mm x 40mm x 9mm)
82-7121
7121
Replacement Keypad - Indoor ● Double-Gang - 2 LEDs ● NO control board - keypad only ● Replacement
keypad for all Corby 4000, 6500 and 7000 Series units ● Flush mount plate ● Standard-size keypad ● Red and green
12VDC LEDs (see 81-0043 & 81-0044) ● 4.5" W x 4.56" L x 0.34" D (114mm x 115mm x 9mm)
82-7122
7122
Replacement Keypad - Single-Door - Outdoor ● Standard-Size Keypad ● NO control board - keypad only ●
Replacement keypad for all Corby 4000, 6500 and 7000 Series units ● Surface mount, aluminum housing w/ springloaded cover ● Red and green 12VDC LEDs & 12VDC night light w/ lens (see 81-0043,44,51,52) ● Includes a rearmount sealing gasket ● Surface mounts easily on optional 95-0012 & 95-0014 tamper-proof back boxes ● 2.8" W x
4.6" L x 0.92" D (71mm x 117mm x 24mm)
82-7130
7130
Replacement Keypad - Indoor ● Single-Gang - 3 LEDs ● NO control board - keypad only ● Replacement
keypad for all Corby 4000, 6500 and 7000 Series units ● Flush mount plate ● Standard-size keypad ● Red, green
and yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Easily mounted in an optional 95-0011 tamper box ●
2.75" W x 4.5" L x 0.34" D (53mm x 40mm x 9mm)
82-7140
7140
Replacement Keypad - Indoor ● Single-Gang - 4 LEDs ● NO control board - keypad only ● Replacement
keypad for all Corby 4000, 6500 and 7000 Series units ● Flush mount plate ● Standard-size keypad ● 1 Red, 1
green and 2 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● Easily mounted in an optional 95-0011
tamper box ● 2.75" W x 4.5" L x 0.34" D (53mm x 40mm x 9mm)
82-7171
7171
Replacement Keypad - Indoor ● Double-Gang - 7 LEDs ● NO control board - keypad only ● Replacement
keypad for all Corby 4000, 6500 and 7000 Series units ● Flush mount plate with pre-punched speaker grill ●
Standard-size keypad ● 1 Red, 1 green & 5 yellow 12VDC LEDs (see 81-0043, 81-0044 & 81-0045) ● 4.5" W x 4.56"
L x 0.34" D (114mm x 115mm x 9mm)
92-4018
4018
Battery - Gel Cell ● 12VDC @ 4 Ah ● Rechargable ● Ideal for retaining the power integrity of access control
panels, keypad circuits, alarm systems or any other low voltage devices● Replacement battery for Corby Systems 1,
2, 4, 5 & 10 ● Same battery as included in Corby power supply kit 92-4094 ● Replace every 3-5 years ● 3.5" W x 4"
L x 2.75" H (89mm x 102mm x 70mm)
92-4019
4019
Transformer ● Primary input is 120VAC, 60 Hz, 48W ● Output is 16.5 VAC @ 40 VA ● UL listed ● Plug-in Class 2
not wet ● Wall wart type ● Internal green indicator LED ● Non-polarized 2 prong plug w/ secure screw ● Two screw
terminals for output ● Internal non-replaceable fuse per UL standards ● Ivory ● 1.9" W x 2.6" L x 3.4" D (66mm x
48mm x 86mm)
92-4093
4093
Power Supply Motherboard ● Selectable 6 or 12VDC @ 1.2 Amp or 24VDC @ 750 mA ● Regulated output ● 8"
(203mm) battery leads ● Automatic switchover to stand-by battery in the event of power failure ● Thermal and
short circuit protection with auto reset ● AC input and DC output LED indicators ● 92-4019 transformer and 924018 battery not included ● Replacement board for Corby 92-4094 power supply ● 2.5" W x 3" L x 1.5" H (64mm x
76mm x 38mm).
92-4094
4094
Power Supply ● Selectable 6 or 12VDC @ 1.2 Amp ● Regulated output ● 8" (203mm) battery leads ● Automatic
switchover to stand-by battery in the event of power failure ● Thermal and short circuit protection with auto reset ●
AC input and DC output LED indicators ● Power supply board: 2.5" W x 3" L x 1.5" H (64mm x 76mm x 38mm) ●
Battery: 3.5" W x 4" L x 2.75" H (89mm x 102mm x 70mm) ● Transformer: 2.65" W x 2.5" L x 3.25" D (67mm x
64mm x 83mm)
93-5201
5201
Lock - Magnetic ● Silver ● 650 lbs (295Kg) holding force ● 12VDC / 415mA or 24VDC / 215mA ● Mini magnetic
holding device designed for low door clearance or minimum security applications ● Heavy-duty anodized extruded
aluminum ● Includes mounting brackets for out-swinging doors & frames ● Releases instantly when power is
disconnected with no residual magnetism ● Optional Z-bracket 93-5207 for in-swinging door mounting ● Requires
92-4094 power supply ● Magnet: 1.625" W x 10" L x 1" H (42mm x 250mm x 25mm) Armature Plate: 1.5" W x
7.25" L x 0.5" Thick (38mm x 185mm x 12mm)
93-5202
5202
Lock - Magnetic ● Brown ● 650 lbs (295Kg) holding force ● 12VDC / 415mA or 24VDC / 215mA ● Mini magnetic
holding device designed for low door clearance or minimum security applications ● Heavy-duty anodized extruded
aluminum ● Includes mounting brackets for out-swinging doors & frames ● Releases instantly when power is
disconnected with no residual magnetism ● Optional Z- bracket 93-5207 for in-swinging door mounting ● Requires
92-4094 power supply ● Magnet: 1.625" W x 10" L x 1" H (42mm x 250mm x 25mm) Armature Plate: 1.5" W x
7.25" L x 0.5" Thick (38mm x 185mm x 12mm)
16 of 19
2005.09.08 14:41
93-5203
5203
Lock - Magnetic ● Silver ● 1300 lbs (590Kg) holding force ● 12VDC /415mA or 24VDC / 215mA ● Medium-duty
holding device ● Heavy-duty anodized extruded aluminum ● Includes mounting brackets for out-swinging doors and
frames ● Releases instantly when power is disconnected with no residual magnetism ● Optional Z-bracket 93-5208
for in-swinging door mounting ● Requires 92-4094 power supply ● Magnet: 2.625" W x 10.5" L x 1.625" H (68mm
x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x 185mm x 16mm)
93-5204
5204
Lock - Magnetic ● Brown ●1300 lbs (590Kg) holding force ● 12VDC / 415mA or 24VDC / 215 mA ● Medium-duty
holding device ● Heavy-duty anodized extruded aluminum ● Includes mounting brackets for out-swinging doors and
frames ● Releases instantly when power is disconnected with no residual magnetism ● Optional Z-bracket 93-5209
for in-swinging door mounting ● Requires 92-4094 power supply ● Magnet: 2.625" W x 10.5" L x 1.625" H (68mm
x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625" Thick (60mm x 185mm x 16mm)
93-5205
5205
Lock - Magnetic ● Silver ● 1500 lbs (675Kg) holding force ● 12VDC /415mA or 24VDC / 215mA ● Heavy-duty
holding device ● Heavy-duty anodized extruded aluminum ● Red/green LED indicator installed in mounting brackets
● Use for out-swinging doors and frames ● Releases instantly when power is disconnected with no residual
magnetism ● Optional Z- bracket 93-5208 for in-swinging door mounting ● Requires 92-4094 power supply ●
Magnet: 2.625" W x 10.5" L x 1.625" H (68mm x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625"
Thick (60mm x 185mm x 16mm)
93-5206
5206
Lock - Magnetic ● Brown ● 1500 lbs (675Kg) holding force ● 12VDC / 415mA or 24VDC / 215mA ● Heavy-duty
holding device ● Heavy-duty anodized extruded aluminum ● Red/green LED indicator installed in mounting brackets
● Use for out-swinging doors and frames ● Releases instantly when power is disconnected with no residual
magnetism ● Optional Z-bracket 93-5209 for in-swinging door mounting ● Requires 92-4094 power supply ●
Magnet: 2.625" W x 10.5" L x 1.625" H (68mm x 268mm x 42mm) Armature Plate: 2.375" W x 7.25" L x 0.625"
Thick (60mm x 185mm x 16mm)
93-5207
5207
Z-Bracket ● Silver ● Converts 93-5201 & 93-5202 to in-swinging door ● Includes one adjustable aluminum Zbracket, one aluminum L-bracket for the magnet, one steel armature screw, two zinc-plated steel washers and one
rubber washer ● Made of heavy-duty anodized aluminum with counter-sunk mounting holes ● Unit is adjustable for
easy installation
93-5208
5208
Z-Bracket ● Silver ● Converts 93-5203 & 93-5205 to in-swinging door ● Includes one adjustable aluminum Zbracket, one aluminum L-bracket for the magnet, one steel armature screw, two zinc-plated steel washers and one
rubber washer ● Made of heavy-duty anodized aluminum with counter-sunk mounting holes ● Unit is adjustable for
easy installation
93-5209
5209
Z-Bracket ● Brown ● Converts 93-5204 & 93-5206 to in-swinging door ● Includes one adjustable aluminum Zbracket, one aluminum L-bracket for the magnet, one steel armature screw, two zinc-plated steel washers and one
rubber washer ● Made of heavy-duty anodized aluminum with counter sunk mounting holes ● Unit is adjustable for
easy installation
93-5301
5301
Door Strike ● Silver ● 12VDC / 685mA ● Tamper strength test 1000 lbs (454Kg) ● Continuous-duty ● Fail-secure ●
Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame doors ● Use with mortis or
cylindrical locks ● Corrosion-resistant case and moving parts ● Reversible and non-handed ● Requires 92-4094
power supply ● 1.25" W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5302
5302
Door Strike ● Brown ● 12VDC / 685mA ● Tamper strength test 1000 lbs (454Kg) ● Continuous-duty ● Fail-secure
● Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame doors ● Use with mortis or
cylindrical locks ● Corrosion-resistant case and moving parts ● Reversible and non-handed ● Requires 92-4094
power supply ● 1.25" W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5303
5303
Door Strike ● Silver ● 24VDC / 570mA ● Tamper strength test 1000 lbs (454Kg) ● Continuous-duty ● Fail-secure
● Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame doors ● Use with mortis or
cylindrical locks ● Corrosion-resistant case and moving parts ● Reversible and non-handed ● Requires 92-4094
power supply ● 1.25" W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
93-5304
5304
Door Strike ● Brown ● 24VDC / 570mA ● Tamper strength test 1000 lbs (454Kg) ● Continuous-duty ● Fail-secure
● Anodized aluminum ANSI sized faceplate for hollow metal, aluminum or wood frame doors ● Use with mortis or
cylindrical locks ● Corrosion-resistant case and moving parts ● Reversible and non-handed ● Requires 92-4094
power supply ● 1.25" W x 4.875" L x 1.5" D (32mm x 124mm x 38mm)
94-0022
22
Latching Relay ● Form A with a single set of latching dry contacts activated by mechanical cam ● 12VDC SPST
with 6" (152mm) wires attached ● State of relay not affected by power interruption ● On/off dry contact closure for
low voltage circuits ● Includes factory installed diode for EMP suppression & double sided tape for easy mounting ●
1.44" W x 1.125" L x 1.31" H (37mm x 29mm x 33mm).
17 of 19
2005.09.08 14:41
94-0025
25
Momentary Relay ● Low current 6-12VDC SPDT Form C rated 3 amps @ 120 VAC with 6" (152mm) wires
attached ● Only requires 18ma @ 6VDC & 36ma @ 12VDC to activate ● Momentary dry closure for low voltage
circuits ● General purpose relay ● Includes factory installed diode for EMP suppression & double-sided tape for easy
installation ● 0.88" W x 0.63" L x 0.63" H (22mm x 16mm x 16mm).
94-0078
78
Relay Module ● Low level, momentary, SPDT Form C rated @ 1 amp @ 28VDC ● 6 - 14VDC operation ● Small
circuit board contains relay to activate transistor amplifiers ● Quick-connect wire harness ● Sensitive relay only
needs 500uA @ 6VDC or 1mA @ 12VDC to activate ● Use positive or negative constant trigger ● Use with 7000
series keypad or any other appropriate device to activate panic or other circuits using any two digits of keypad●
Double-sided mounting tape & hardware ● 1.5" W x 2" L x .5" H (38mm x 51mm x 13mm)
94-0086
86
Digital Controller ● Programmable relay for panic, latching, regular & delay timer, zone control ● SPDT Form C
rated @ 5 amp @ 24VDC ● 6 - 18VDC operation ● Quick-connect wire harness ● Use with 7000 series keypad to
provide a relay output ● The 86 can stand alone in a low voltage circuit responding to a positive or negative trigger
● Delay timer can be programmed from 1sec.>8.5 min. and can be cascaded for hours ● Bypass of alarm loops,
security cameras, delaying sirens & bells, activate doors, shunt alarm circuits● 1.5" W x 2" L x .75 H (38mm x
51mm x 13mm)
95-0011
11
Tamper Box ● Recessed ● Single-gang ● Flush mount for old and new work ● Easy-mount swing tabs ● High
impact lightweight PVC w/ knockouts ● Tamper switch w/ SPDT form C contacts & leaf-style adjustable contact arm
& 6" (152mm) wires attached ● Use with any single-gang device except our 52-4012 71-6522 72-7022 ● Volume
is 14 cubic inches ● 2.25" W x 4.125" L x 2.75" D (57mm x 105mm x 70mm)
95-0012
12
Tamper Box ● Surface mount ● Front tamper switch w/SPDT form C contacts & leaf-style adjustable contact arm
& 6" (152mm) wires attached ● One rear tamper form A hermetically sealed plunger type switch with two wires
attached ● Use with any single-gang device ● Box is single-gang, surface mount, die cast aluminum painted gray
with one-half inch threaded conduit holes (3) ● Mounting hardware included (gaskets not included) ● Volume is 25
cubic inches ● 2.75" W x 4.5" L x 2" D (70mm x 114mm x 51mm)
95-0014
14
Mounting Box ● Surface mount ● Heavy duty 0.045" thick welded steel with gray corrosion proof coating ● Form
A hermetically sealed, plunger type, front mounted tamper switch with two 6" (152mm) wires attached● Use with
any single-gang device ● Front and rear sealing gaskets and mounting hardware included ● Unit has a 0.875"(22
mm) rear hole for exit wiring ● Volume is 18 cubic inches ● 3.31" W x 5.06" L x 1.1" D (84mm x 129mm x 28mm)
96-4238
4238
AC Surge Protection Device ● Four wide-spaced outlets ● Excellent for plug-in transformers such as our 92-4019
● 120VAC 50/60 HZ at 12 amps ● Neon status light ● External fuse ● Surge protection and noise filtering ● Three
stages of MOVs ● 355 Joule energy absorption capacity ● 40+db noise insertion loss @ 10 MhZ ● UL Approved ●
Instantaneous response starting at 140 VAC RMS ● Meets or exceeds IEEE Std 587-1980 ● Enameled steel box ●
Professional grade ● Can be wall mounted ● Includes threaded screw holes for secure installation of transformers ●
3.5" W x 17" L x 2.5" H (89mm x 432mm x 64mm)
96-4239
4239
RS-232 Surge Protection Device ● Protects the RS-232 communications port from damage initiated from
electrical irregularities such as static electricity and near lightning strikes● Bi-directionally protects the 11 most
used, important data lines ● 10 MOVs ● Less than 1 nanosecond reponse time ● Clamping voltage 22 Vp @ 1 ma,
47 Vp @ 5A ● Easy plug-and-play installation ● Use on all RS-232 devices ● DB25 M > F ● 2.125" W x 2.25" L x
0.625" H (54mm x 57mm x 16mm)
96-4240
4240
AC Surge Protection Device ● 120VAC 50/60 HZ at 12 amps ● Status light ● External fuse ● Surge protection
and noise filtering ● Three stages of MOVs ● 355 Joule energy absorption capacity ● 40+db noise insertion loss @
10 MhZ ● UL Approved ● Instantaneous response starting at 140VAC RMS ● Meets or exceeds IEEE Std. 587-1980
● 2.8" W x 4" L x 3.2" D (71mm x 102mm 81mm)
97-4060
4060
Mounting Hardware Kit ● Use to mount Wiegand swipe style readers to our 97-4061 ● Heavy-duty vandalresistant 0.074" thick (2mm) rust-proof stainless steel ● L-shaped mounting plate and weather protector ● Predrilled for mounting ● 3" W x 8" L x 5" H x 0.074" Thick (76mm x 203mm x 127mm x 2mm)
97-4061
4061
Driveway and Gate Pedestal Mount ● 40" High (1m) with 11" (279mm) gooseneck reach at 90° angle ●
Universal mounting plate easily adapts to Access Control products ● Bolt mount includes concrete base plate and
base plate cover ● Hollow tube is rugged 2" x 2" (51mm x 51mm) steel construction ● Powder-coated black ●
Wiegand swipe style readers mount with our 98-4060 mounting hardware kit ● Pedestal: 40" H (1m) Base: 5" x 5"
(127mm x 127mm) Top flange: 3.75" x 3.75" (95mm x 95mm)
98-4058
4058
Steel Cabinet - Large ● Ideal for mounting power supplies, batteries, or other devices ● Also replacement cabinet
for Systems 2, 4, 5, 10, & 2000 panel motherboards ● Gray ● Rear has four mounting screw holes and four passthrough wire holes 0.8" dia (20mm) ● Panel sides have five pass-through wire holes 0.8" dia (20mm) ● Includes
lock set and keys ● 11" W x 15.5" H x 4.5" Deep x 0.045" Thick (394mm x 280mm x 114mm x 1mm)
18 of 19
98-4059
4059
Steel Cabinet - Small ● Ideal for mounting power supplies, batteries, or other devices ● Also replacement cabinet
for System 1 & System 2000 Network Interface Card motherboards ● Gray ● Rear has four mounting screw holes
and four pass-through wire holes 0.8" dia (20mm) ● Panel sides have seven pass-through holes 0.8" dia (20mm) ●
Includes lock set and keys ● 9" W x 12" H x 4.5" Deep x 0.045" Thick (229mm x 305mm x 114mm x 1mm)
All prices are subject to change without notice. For all prices, products, and services, Corby reserves
the right to make adjustments due to changing market conditions, product discontinuation,
manufacturing cost changes, typographical errors, or other extenuating circumstances. Errors do
exist and Corby is not responsible for accuracy. We are always improving products so specifications
may change. Contact us by email or telephone with problems, questions, or comments.
2005.09.08 14:41
19 of 19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement