50281 2 ifs d1810 ds fin
TH
† May be extended to condensation conditions by adding su
number for conformal coating.
850 nm, Multimode
F FIBERS®
2
IFS Line / Fiber Transmission
RS
ST
wer:
Terminal Plug with screw clamps
D1810 Series
AL & MECHANICAL
IFS Bi-Directional Contact
Closure24Transceiver
VAC C.T. @ 150 mA
From Rack
k Slots:
on:
1
Automatic Resettable Solid-State Current
Limiters
AGENCY COMPLIANCE
Meets IPC Standard
LxWxH):
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
OVERVIEW
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
t:
The IFS D1810 Series contact closure transceiver provides one-way
< 2transmission
lbs./0.9 kg
or bi-directional
of contact closure over one or two
multimode optical fibers. The transceiver has a contact input
and a 0.5amp contact output. Plug-and-play design ensures
ease of installation requiring no electrical or optical adjustments.
Each transceiver incorporates power and transmit/receive status
indicating LED’s for monitoring confirmation of contact closure. The
modules are available in either stand-alone or rack mount versions.
POWER BUDGET
APPLICATION EXAMPLES
WAVELENGTH
MODEL
Federal Supply
STANDARD
MADE INFEATURES
THE USA
Contract No. GS
Complies
FDA
Performance
Standard for Lase
Transmits
a Single with
Contact
Closure
in One or Two Directions
Title
21,
Code
of
Federal
Regulations,
Subchapter
Distances up to 2.5 Miles (4 km)
24 VDC, 0.5 Amp Relay Output, Normally Open
Point-to-Point Transmission Architecture
Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Status LED Indicators
• Hot-Swappable Rack Modules
• Automatic Resettable Solid-State Current Limiters
1 µw
14 dB
• Contact Input
• Comprehensive
Lifetime Warranty
(-30 dBm)
•
•
•
•
•
TRANSCEIVER
SENSITIVITY
OUTPUT
OPTICAL
PWR BUDGET
• Alarm Event Triggering
• Building Automation and Environmental Control Systems
• Fire nm
& Alarm Systems D1810
850
25 µw
• Gate control
(-16 dBm)
• PIR signal Transmission
• TrafficisSignal
Control
Equipment
ission distance
limited
to optical
loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
DESIGN
1
Contact in
1
Contact out
D1810
up to 2.5 miles
(4 km)
D1810
ifs
ifs
2 Fibers
62.5/125µm MM
1
Contact out
1
Contact in
interlogix.com
D1810 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS Bi-Directional Contact Closure Transceiver
Ordering Information
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
D1810
Bi-Directional Contact Closure Transceiver (850 nm)
2
14 dB
2.5 miles (4 km)
Accessories ♦
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Data
Contact Interface:
Response Time: 0.5 msec
Input:
Dry Contact closure
Output
SPST Relay, 0.5 A Contact rating, normally open
Wavelength
850 nm, Multimode
Number Of Fibers
2
Connectors
Optical:
ST
Contacts and Power:
Terminal Plug with screw clamps
Electrical & Mechanical
Power:
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Surface Mount:
12VDC @ 200mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Latin America
T 305-593-4301
F 305-593-4300
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
gesecurity.com/ifs
Rack Mount:
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
Shipping Weight:
< 2 lbs./0.9 kg
Size (in./cm.) (LxWxH)
Europe
T 44-113-238-1668
F 44-113-253-8121
Specifications subject to
change without notice
Agency Compliance
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
De
RS
RS
RS
RS
RS
RS
RS
D1810
Accessories♦
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement