PHW - Communication Functions (Ethernet)(TN5A0165a-E)

PHW - Communication Functions (Ethernet)(TN5A0165a-E)
Instruction Manual
PAPERLESS RECORDER
COMMUNICATION
FUNCTIONS
(Ethernet)
TYPE: PHW
INP-TN5A0165a-E
Note: MODBUS® is the trade mark or registered trade mark of AEG Schneider Automation International.
NOTICE
1. Exemption items from responsibility
The contents of this document may be changed in the future without prior notice.
We paid the utmost care for the accuracy of the contents. However, we are not liable for direct and
indirect damages resulting from incorrect descriptions, omission of information, and use of
information in this document.
CONTENTS
1.
COMMUNICATION FUNCTIONS ·································································································· 1
1.1 General············································································································································ 1
2.
2.1
2.2
2.3
2.4
2.5
ETHERNET COMMUNICATION FUNCTIONS ············································································· 2
LAN port specification···················································································································· 2
Connection to the terminal ·············································································································· 2
Connection ······································································································································ 2
Setting Ethernet communicating conditions ···················································································· 3
Ethernet communicating conditions setting operation ····································································· 3
3.1
3.2
3.3
3.4
FTP SERVER FUNCTION················································································································ 4
Description of FTP server function ································································································· 4
Setting FTP server function············································································································· 6
FTP server function setting operation······························································································ 6
FTP server operation ······················································································································· 7
4.1
4.2
4.3
4.4
4.5
Web server function ··························································································································· 8
Description of web server function·································································································· 8
Setting web server function ············································································································· 8
Web server function setting operation ····························································································· 8
Web server operation ······················································································································ 9
Web monitor screen ························································································································ 9
5.1
5.2
5.3
5.4
5.5
E-MAIL SEND FUNCTION ··········································································································· 12
Description of E-mail send function ······························································································ 12
Setting E-mail function ················································································································· 12
E-mail function setting operation ·································································································· 13
E-mail send test operation ············································································································· 16
E-mail send contents ····················································································································· 16
6.1
6.2
6.3
MODBUS TCP/IP FUNCTION······································································································· 17
Description of MODBUS TCP/IP function ··················································································· 17
Setting MODBUS TCP/IP function······························································································· 17
MODBUS TCP/IP function setting operation················································································ 17
7.1
7.2
7.3
7.4
7.5
MODBUS TCP/IP COMMUNICATION PROTOCOL···································································· 18
General·········································································································································· 18
Composition of Message ··············································································································· 19
Response of Slave Station ············································································································· 20
Function Code······························································································································· 21
FIX Processing (Cautions in data write) ························································································ 22
3.
4.
5.
6.
7.
8.
DETAILS OF MESSAGE················································································································ 23
8.1 Read-out of Word Data [ Function code : 03H ]············································································· 23
8.2 Read-out of Read-out Only Word Data [ Function code : 04H ] ·························································· 25
8.3 Write-in of Continuous Word Data [ Function code : 10H ] ··························································· 27
9.
ADDRESS MAP AND DATA FORMAT························································································· 29
9.1 Data Format ·································································································································· 29
9.2 Address Map ································································································································· 30
9.3 Additional Explanation of Address Map ······················································································· 47
10.
TROUBLESHOOTING··················································································································· 57
-i-
1. COMMUNICATION FUNCTIONS
1.1 General
This equipment provides a communication function (optional) using an Ethernet interface.
・ The following functions are available as Ethernet communication functions.
(1) FTP server function
Permits take-out of files from the compact flash of the paperless recorder, using personal computer's
browser (Internet Explorer Ver.6) or DOS prompt.
(2) Web server function
Permits check of measured values and event information recorded in the paperless recorder, using personal
computer's browser (Internet Explorer Ver.6).
(3) E-mail send function
Permits E-mail transmission in a fixed period and also on occurrence of an alarm.
(4) MODBUS TCP/IP function
Permits exchange of data with host computer, programmable controller, graphic display panel, data viewer,
etc. by MODBUS TCP/IP communication.
Note: The other browsers, for example Netscape, Mozilla Fire-fox, are not available.
-1-
2. ETHERNET COMMUNICATION
FUNCTIONS
FTP server function, web server function, E-mail send function and MODBUS TCP/IP function can be used for
Ethernet communication.
Setting of IP address, etc. is essential for connection of a paperless recorder to Ethernet. Be sure to consult with the
system manager of your company.
2.1 LAN port specification
Item
Transmission rate
Transmission method
Maximum network length or maximum node interval
Maximum segment length
Cable for connection
Protocol
Specification
10 Mbps 10BASE-T
Base band
500 m (cascade in 4 stages)
100 m (between node and hub)
UTP (twisted-pair cable without shield) 22-26 AWG
TCP/IP
2.2 Connection to the terminal
Ethernet terminal
2.3 Connection
Ethernet
HUB
10 BASE-T
straight cable
Node to hub distance
: Up to 100 m
Maximum number of nodes per network : 100 nodes
Recommended cable
: 10 BASE-T twisted-pair cable, Category 5
-2-
2.4 Setting Ethernet communicating conditions
•
Set IP address, subnet mask and default gateway for connection of the paperless recorder to Ethernet. (Consult
with the system manager of your company for the values to be set.)
•
Communicating conditions setting items
Item
IP address
Sugnet mask
Default gateway
Value at delivery
192.168. 1. 1
255.255.255. 0
0. 0. 0. 0
Setting range
0 to 255 for each digit
0 to 255 for each digit
0 to 255 for each digit
Remarks
Turn ON the power again after
setting change.
2.5 Ethernet communicating conditions setting operation
(1) Select “Main unit” → “Ethernet communication setting” on the parameter setting screen, and the “Ethernet
communication setting” screen appears.
(2) Select “Ethernet setting 1”, and the following screen appears.
(3) Move the cursor to “IP address” and set an IP address.
(4) Move the cursor to “Subnet mask”, and set a subnet mask.
(5) Move the cursor to “Default gateway”, and set a default gateway.
-3-
3. FTP SERVER FUNCTION
3.1 Description of FTP server function
•
This function permits take-out of record files from the compact flash of the recorder, using browser or DOS
prompt.
•
This function permits reading recording data stored in the internal memory of the recorder.
•
This function permits deletion of record files from the compact flash of the recorder, using browser or DOS
prompt. (This function is available only to a user of administration level.)
•
This function permits changing names of record files recorded on the compact flash of the recorder, using
browser or DOS prompt. (This function is available only to a user of administration level.)
•
Use Internet Explorer made by Microsoft as the personal computer's browser.
•
Up to eight (8) user names and passwords may be set for those who are permitted to log in the FTP server.
•
If the FTP access control function is OFF, log-in to the FTP server is permitted with common user name “ftp”
(without password).
•
When log-in or log-off to/from the FTP server is executed, the subject information is displayed on the Ethernet
log screen.
•
The FTP server permits log-in by one user only at a time.
•
The internal memory of the recorder appears as binary format irrespective of “record data format” setting of the
equipment.
•
Folder configuration of the FTP server is as follows.
[Caution]
• The communication automatically disconnects, if no FTP communication request is made for 10 minutes.
•
The display motion of the paperless recorder may slow down when taking out a file of large size.
•
While the compact flash of the paperless recorder is accessed by FTP communication, do not take out the
compact flash.
Furthermore, when the FTP server function is used, inhibit access to the compact flash in the "Memory card
abstract" screen, before taking out the compact flash.
•
Do not delete or change the name of a file while the file is being recorded or integrated.
•
Attributes of all files in the FTP server are displayed as read-only as hidden files.
•
If the Ethernet communication is shut down while the FTP server is in log-in status, log-in is not permitted
until the communication is automatically disconnected ten (10) minutes later.
•
Data files cannot be written into the compact flash installed in the paperless recorder via FTP
communication.
•
Update time that appears on the list of files contained in the compact flash may differ from the actual update
time if the file list is displayed via FTP communication.
-4-
Folder configuration of the FTP server
& &
&'(
# %
) *
! "! $! +! ,! -
.! /! 01 #0 %
! "! $! +! ,! -
.! /! 01 #0 %
! "
! "
! "
! "
-5-
#$ %
#$ %
#$ %
#$ %
3.2 Setting FTP server function
•
Execute setting of FTP server function and of access verification, for using the FTP server function.
Furthermore, set names and passwords of those who use the FTP server function.
•
FTP server function setting items
Item
FTP server function
FTP access control
•
OFF
OFF
Value at delivery
Setting range
ON, OFF
ON, OFF
Value at delivery
(Blank)
(Blank)
Administrator
Setting range
Up to 16 letters may be set.
Up to 8 letters may be set.
Administrator, guest
Remarks
Turn ON the power again
after setting is changed.
User name setting items
Item
User 1 to 8 name
User 1 to 8 password
User 1 to 8 level
Remarks
3.3 FTP server function setting operation
• FTP server function setting
(1) Select “Main unit” → “Ethernet communication setting” → “Ethernet setting 2” on the parameter setting screen,
and the following screen appears.
(2) Move the cursor to “FTP server function”, and select FTP server function ON/OFF. The FTP server function can
be used, if ON is set.
(3) Move the cursor to “FTP access control”, and select FTP access control function ON/OFF. No password is
required at the time of log-in to the FTP server, if OFF is set.
-6-
• User name setting
(1) Select “Main unit” → “Ethernet communication setting” → “User account setting” on the parameter setting
screen, and the following screen appears.
(2)
(3)
(4)
(5)
Select a user No. to be set.
Set a user name using up to 16 letters.
Set a password using up to 8 letters.
Select a user access level out of “administrator” and “guest”.
If “guest” was selected, file deletion is not permitted, although log-in to the FTP server is permitted.
3.4 FTP server operation
•
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Connect the FTP server to the paperless recorder from the browser, by performing operation in the sequence
indicated below.
Start Internet Explorer from a personal computer on Ethernet.
Enter the IP address of the paperless recorder in the address column in the following manner.
FTP: //(paperless recorder's IP address)
Enter FTP: //192.168.1.2 in case the IP address of the paperless recorder is 192.168.1.2.
The screen that requests entry of user name and password appears. Enter a user name and password.
“S000000” and “MEMORY” directories are displayed on the browser.
If you wish to display the recording file in the compact flash, select “S000000” folder.
To display the recording file in the internal memory, select “MEMORY” folder.
The recording file recorded in the browser is displayed.
Select the file to be read, and copy to the desired folder in the PC.
When the compact flash is selected, it is available to delete the recording flie.
Select the file to be deleted, and delete the file.
-7-
4. Web server function
4.1 Description of web server function
•
The web server function permits monitoring of measured values and event log in the paperless recorder using
personal computer's browser.
•
Use Internet Explorer made by Microsoft as the personal computer's browser.
[Caution] • Monitoring from cell phone's browser is not permitted. If connection to recorder's web server is
made from a cell phone, the recorder may halt in the worst case. Do not attempt to monitor data in
the paperless recorder from a cell phone.
• An error may arise depending on the circumstances of the communication, as the period of update of
the browser is 10 seconds.
The screen of the PC is displayed again, if the update button of the browser is pressed in such a case.
• The characters may not be displayed normally depending on the setting of the browser.
• With the type of 9-channel specifications, 0.0°C is displayed as the reading of channels 10 to 36 on
the measured value display screen.
4.2 Setting web server function
•
Set the web server function for permitting its use.
•
Set items
Item
Web server function
Value at delivery
OFF
Setting range
ON, OFF
Remarks
Turn ON the power again after setting is changed.
4.3 Web server function setting operation
(1) Select “Main unit” → “Ethernet communication setting” → “Ethernet setting 2” on the parameter setting screen,
and the follow screen appears.
(2) Move the cursor to “Web server function”, and select web server function ON/OFF. Use of the web server
function is permitted if ON is set.
-8-
4.4 Web server operation
•
Connect the web server to the paperless recorder from the personal computer's browser, by performing
operation in the sequence indicated below.
(1) Start Internet Explorer from a personal computer on Ethernet.
(2) Enter the IP address of the paperless recorder in the address column in the following manner.
http: //(paperless recorder's IP address)
Enter http: //192.168.1.2 in case the IP address of the paperless recorder is 192.168.1.2.
(3) The paperless recorder monitor screen is displayed on the browser.
4.5 Web monitor screen
•
Connect to the web server of the paperless recorder, and the following screen appears.
(1) Web monitor menu screen
-9-
(2) PV display screen
(3) Totalize display screen
-10-
(4) Event Summary display screen
-11-
5. E-MAIL SEND FUNCTION
5.1 Description of E-mail send function
•
E-mails can be transmitted from the paperless recorder. (Receipt of E-mails is not permitted.)
•
E-mails can be transmitted in any of the states indicated below.
(1) An alarm arose or was cancelled.
(2) An external input (DI) was ON or OFF.
(3) Any error occurred to the main unit. (When battery end, memory card full, or one of the alarms of all the
channels should occur)
(4) Once every fixed period (The period may be selected out of 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 12
hours and 24 hours.)
•
Up to eight (8) addresses can be registered for transmission of E-mails.
•
Measured values of each channel can be attached to each E-mail.
• E-mail transmission test can be conducted in the E-mail trigger setting screen.
[Caution]
•
Up to sixteen (16) E-mail send requests can be transmitted continuously, but not more than 16.
No transmission will be implemented if the number of E-mail send requests exceeds 16. Therefore, make
setting so that E-mail send requests will not occur continuously.
•
For sending E-mails, it is necessary to register the paperless recorder in the mail server.
Consult with the system manager of your company, for registration to the mail server.
•
If E-mail send fails, the E-mail send requests are cancelled.
•
Even if E-mail is sent, there is a possibility where the E-mail does not reach the destination because of
incorrect address, etc.
•
If two or more E-mail addresses are set as send destinations in the E-mail trigger setting, the error message
is not recorded on the Ethernet log screen unless all the attempts to send E-mails fail.
5.2 Setting E-mail function
•
Set E-mail send/receive addresses and E-mail send trigger, for permitting use of the E-mail function.
(Consult with the system manager of your company, for the values to be set.)
•
E-mail function set items
Item
E-mail function
•
Value at delivery
OFF
Setting range
ON, OFF
Remarks
Turn ON the power again after setting
change.
E-mail send/receive address set items
Item
SMPT IP address
Sender’s mail address
Sender’s mail name
Receiver’s mail address
1 to 8
Value at delivery
0. 0. 0. 0
(Blank)
(Blank)
(Blank)
Setting range
0 to 255 for each digit
Up to 64 letters may be set.
Up to 32 letters may be set.
Up to 64 letters may be set.
-12-
Remarks
•
E-mail send trigger set items
Item
Title
Trigger timing
Value at delivery
(Blank)
None
DI No.
Alarm Channel
Alarm No.
Warning type
DI 1
Channel 1
1
Alarm ON (All ch)
Time cycle
Time base (hour)
Text 1
Text 2
PV value affixation
Receiver’s add No.
1 hour
0:00
(Blank)
(Blank)
OFF
None
Setting range
Up to 32 letters may be set.
None, DI ON, DI OFF,
Alarm ON, Alarm OFF,
Warning, Timer cycle
DI 1 to 16
Channel 1 to 72
1 to 4
All alarm or output,
All warning or output, No battery,
Memory card full
1, 2, 3, 4, 6, 12 hour, 1 day
0:00 to 23:00
Up to 32 letters may be set.
Up to 32 letters may be set.
ON, OFF
Receiver’s address
No. 1, 2, 3, 4, 5, 6, 7, 8
Remarks
Trigger timing = DI ON, DI OFF
Trigger timing = Alarm ON, OFF
Trigger timing = Warning
Trigger timing = Timer cycle
5.3 E-mail function setting operation
• Setting E-mail function
(1) Select “Main unit” → “Ethernet communication setting” → “Ethernet setting 2” on the parameter setting screen,
and the following screen appears.
(2) Move the cursor to “E-mail function”, and select E-mail function ON/OFF. The E-mail send function can be
used, if ON is set.
-13-
• Setting E-mail send/receive addresses
(1) Select “Main unit” → “Ethernet communication setting” → “E-mail setting 1” on the parameter setting screen,
and the following screen appears.
(2)
(3)
(4)
(5)
Move the cursor to “SMTP IP address”, and set the IP address of the mail server.
Move the cursor to “Sender’s mail Add”, and set the sender's mail address.
Move the cursor to “Sender’s mail Name”, and set the sender's name.
Select “Main unit” → “Ethernet communication setting” → “E-mail setting 2” on the parameter setting screen,
and the following screen appears.
(6) Move the cursor to “Receiver’s mail Add”, and set up to eight (8) receivers' mail addresses.
-14-
• Setting E-mail send trigger
(1) Select “Main unit” → “Ethernet communication setting” → “E-mail trigger setting” on the parameter setting
screen, and the following screen appears.
(2) Up to ten (10) patterns of E-mail send timing may be set.
Select a send timing to be selected, and press the [ENT] key.
(3) Move the cursor to “Title”, and set the E-mail title.
(4) Move the cursor to “Trigger timing”, and select an E-mail send timing.
Select one of the followings as an E-mail send timing.
When a timing is selected, particulars set items are displayed for each timing type. Set these items also.
1) DI ON, DI OFF
E-mails can be sent by DI ON/OFF.
When DI ON/OFF timing is selected, set items for the DI No. to be used are displayed. Set the DI No. to be
used for judgment.
2) Alarm ON, Alarm OFF
E-mails can be sent by the alarm occur/cancel information.
When alarm ON/OFF timing is selected, set items for the channel No. and alarm No. to be used are displayed.
Set the channel No. and alarm No. to be used for judgment.
3) Warning
E-mails can be sent by warning occur information.
When warning is selected, set items for the warning information to be used are displayed. Set the warning
information to be used for judgment.
-15-
4) Timer cycle
E-mails can be sent in a fixed period.
When timer cycle is selected, set items for the send period and reference time are displayed. Set the E-mail
send period and reference time.
(5) Move the cursor to “Text 1”, “Text 2”, and set a comment of two (2) lines to be described in the E-mail.
(6) Move the cursor to “PV value affixation”, and set whether to indicate measured values of all the channels in the
E-mail. All the channels can be indicated , ON is set.
(7) Move the cursor to “Receiver’s add No.”, and select an address No. to receive the E-mail.
The E-mail is sent to each address No. for which ON was set.
5.4 E-mail send test operation
•
Conduct an E-mail send test with the paperless recorder, by performing operation in the sequence indicated
below.
(1) Select “Main unit” → “Ethernet communication setting” → “E-mail trigger setting”.
(2) Select an E-mail trigger setting No. to conduct a send test.
(3) Move the cursor to “Mail send test”, and press the [ENT] key. Then, an E-mail send test can be conducted.
5.5 E-mail send contents
•
The paperless recorder sends an E-mail with following contents.
Sender's mail name
Mail title
Mail trigger timing & time
2002/ 4/ 3 20:00:00 Operational report
1hour
PVON
CH1 =
CH2 =
CH3 =
CH4 =
CH5 =
CH6 =
CH7 =
CH8 =
CH9 =
Mail text 1
Mail text 2
PV value
862.6mH
862.5mm/s
862.5mV
862.5mV
6.270V
6.270V
6.270V
6.270V
6.270V
-16-
6. MODBUS TCP/IP FUNCTION
6.1 Description of MODBUS TCP/IP function
•
The MODBUS TCP/IP protocol permits use of MODBUS protocol (MODBUS RTU) on an Ethernet interface.
•
MODBUS TCP/IP communication is executed through port 502.
•
The MODBUS TCP/IP function permits read/write of set values from/to the paperless recorder.
6.2 Setting MODBUS TCP/IP function
•
Make MODBUS TCP/IP function setting to permit the use of MODBUS TCP/IP function.
•
Specify station No. to evaluate the device with which communication is to be carried out.
•
Set items
Item
MODBUS TCP/IP
MODBUS Station NO.
Factory default
OFF
1
Setting range
ON, OFF
0 to 255
Remarks
Turn on the power after the setting is changed.
Communication is not carried out if 0 is selected.
6.3 MODBUS TCP/IP function setting operation
(1) Select Select “Main unit” → “Ethernet communication setting” → “Ethernet setting 2” on the parameter setting
screen, and the following screen appears.
(2) Move the cursor to “MODBUS TCP/IP”, and select MODBUS TCP/IP function ON/OFF. The MODBUS
TCP/IP function can be used, if ON is set.
(3) Select “Main unit” → “Communication setting” on the parameter setting screen.
(4) Move the cursor to “MODBUS Station No.” and select a desired station No.
-17-
7. MODBUS TCP/IP COMMUNICATION
PROTOCOL
7.1 General
The communication system by the MODBUS TCP/IP protocol is that the communication is always started from the
master station and a slave station responds to the received message.
Transmission procedures is as shown below.
1) The master station sends a command message to a slave station.
2) The slave station checks that the station No. in the received message matches with the own station No. or
not.
3) If matched, the slave station executes the command and sends back the response message.
4) If mismatched, the slave station leaves the command message and wait for the next command message.
a)
In case when the station No. in the received command message matches with the own slave station No.
Master to slave
Command message
Slave to master
b)
Response message
In case when the station No. in the received command message mismatches with the own slave station
No.
Master to slave
Command message
(Not respond)
Slave to master
5)
Data on
the line
Data on
the line
To assure safety, provide a structure where the response message is checked and retry is made three (3)
times or more if no response is made or an error occurs.
The master station can individually communicate with any one of slave stations connected on the same line upon
setting the station No. in the command message.
-18-
7.2 Composition of Message
Command message and response message consist of 6 fields ; Transaction Identifier, Protocol Identifier,
Length Unit Identifier, Station No., Function code and Data code. And these are send in this order.
Transaction Identifier (2 bytes)
Protocol Identifier (2 bytes)
Length Unit Identifier ( 2 bytes)
Station No. ( 1 byte )
Function code ( 1 byte)
Data ( 2 to 133 bytes)
Fig.7-1
Composition of message
In the following, each field is explained.
(1)
Transaction Identifier
Identification of a MODBUS Request / Response transaction.
(2)
Protocol Identifier
Set 0 for MODBUS TCP/IP.
(3)
Length Unit Identifier
Number of bytes of data part.
(4)
Station No.
Station No. is the number specifiing a slave station. The command message is received and operated only by
the slave station whose station No. matches with the No. set in the parameter “ MODBUS Station No.”
For details of setting the parameter “ MODBUS Station No.”, refer to chapter 6.
(5)
Function code
This is a code to designate the function executed at a slave station.
For details, refer to section 7.4.
(6)
Data
Data are the data required for executing function codes. The composition of data varies with function codes.
For details, refer to chapter 8.
A register number is assigned to each data in the recorder. For reading/writing
the data by communication, designate the register number.
Note that the register number transmitted on message is expressed as its relative address.
The relative address is calculated by the following expression.
Relative address




= The lower 4 digits of the register number  - 1
For example, when the resister number designated by a function code is 40003,
Relative address = (lower 4 digits of 40003) - 1
= 0002
is used on the message.
-19-
7.3 Response of Slave Station
(1)
Response for normal command
To a relevant message, the slave station creates and sends back a response message which corresponds to the
command message. The composition of message in this case is the same as in section 7.2.
Contents of the data field depend on the function code. For details, refer to Chapter 8.
(2)
Response for abnormal command
If contents of a command message have an abnormality (for example, non-actual function code is designated)
other than transmission error, the slave station does not execute that command but creates and sends back a
response message at error detection.
The composition of response message at error detection is as shown in Fig.7-2 The value used for function
code field is function code of command message plus 80H.
Table 7-1 gives error codes.
Transaction Identifier
Protocol Identifier
Length Unit Identifier
Station No.
Function code + 80H
Error code
Fig.7-2
Response message at error detection
Table 7-1
(3)
Error code
01H
Contents
Illegal function code
02H
Illegal data address
03H
Illegal data number
04H
Device error
Error Code
Description
Non-actual function code is designated.
Check for the function code.
A relative address of a resister number to which the
designated function code can not be used.
Because the designation of number is too much, the area
where resister number do not exist is designated.
Communication with slave equipment failed. Check the
communication specification for the slave equipment.
No response
Under any of the following items, the slave station takes no action of the command message and sends back no
response.
•
A station number transmitted in the command message differs from the station number specified to the
slave station.
•
A transmission error is detected.
•
Station No. of a slave station is set to 0.
-20-
7.4 Function Code
According to MODBUS protocol, register numbers are assigned by function codes.
Each function code acts on specific register number.
This correspondence is shown in Table 7-2, and the message length by function is shown in Table 7-3.
Table 7-2
No.
03H
04H
10H
Correspondence between function codes and objective address
Function code
Function
Object
Read-out
Holding register
(continuously)
Read-out
Input register
(continuously)
Write-in
Holding register
(continuously)
Table 7-3
Function
code
03H
Resister No.
Contents
No.
4xxxx
Read-out/write-in
word data
3xxxx
Read-out
word data
4xxxx
Read-out/write-in
word data
Function code and message length
Contents
Read-out of word data
[Unit: byte]
Command message
Response message
Number of
designatable
Minimum Maximum Minimum Maximum
data
64 words
12
12
11
137
04H
Read-out of word data
(read-out only)
64 words
12
12
11
137
10H
Write-in of continuous word data
64 words
15
141
12
12
-21-
7.5 FIX Processing (Cautions in data write)
The instrument is provided inside with a non-volatile memory (F-ROM) for holding the setting parameters.
Data written in the non-volatile memory is not lost even if turning off the power.
To hold parameters that were written in the internal memory via communication after turning off the power, the FIX
process is effective. It allows parameters to be written in nonvolatile memory.
Fig.7-3 shows the FIX procedure.
Cautions:
• Write in the non-volatile memory takes approximately 2 seconds.
•
While writing, do not turn off the power of the PHF. Otherwise, the data in the non-volatile memory will be
destroyed, whereby the PHF could not be used any longer.
•
Don’t change parameters on the front panel when performing the FIX procedure, or memory error may result.
•
The non-volatile memory (F-ROM) is a device where the number of write-in times is limited. The
guaranteed number of write-in times of the non-volatile memory used on the instrument is 100,000 minimum.
Therefore, limit the times of change of parameter setting to absolute minimum. Refrain from carrying out
the FIX processing periodically for example or while such is not absolutely required.
Start FIX
Read the FIX data
with function code
relative address
No
: 03H
: 1387H
FIX=0?
Yes
Write ‘1’ into FIX data
with function code
relative address
: 10H
: 1387H
Read the FIX data
with function code
relative address
: 03H
: 1387H
No
FIX=0?
Yes
End FIX
Fig.7-3
FIX procedure
-22-
8. DETAILS OF MESSAGE
8.1 Read-out of Word Data [ Function code : 03H ]
Function code
Max. word number read-out
in one message
Relative data address
Register No.
Kind of data
03H
64 words
0000H to 1386H
1387H to 157BH
157CH to 1B57H
40001 to 44999
45000 to 45500
45501 to 47000
Storage enable data
Storage enable data
Storage enable data
(1)
Message composition
Command message composition(byte)
Transaction Identifier
Upper
Protocol Identifier
Length Unit
Identifier
Upper
Response message composition(byte)
Upper
Lower
Transaction
Identifier
Upper
Protocol Identifier
Upper
Length Unit
Identifier
Upper
Lower
Lower
Lower
Lower
Station No.
Lower
Station No.
Function code
Function code
Read-out start No.
Upper
Read-out byte number
(relative address)
Lower
Contents of the
Upper
Read-out word
Upper
first word data
Lower
number
Lower
Contents of the
Upper
next word data
Lower
Contents of the
last word data
Upper
Lower
}1 to 64
Read-out word number×2
~
~
* Arrangement of read-out word data
MSB
LSB
Upper byte of contents of the first word data
Lower byte of contents of the first word data
Upper byte of contents of the next word data
Lower byte of contents of the next word data
~
~
Upper byte of contents of the last word data
Lower byte of contents of the last word data
(2)
Function explanations
Word data of continuous word numbers from the read-out start No. can be read. Read-out word data are
transmitted from the slave station in the order of upper and lower bytes.
-23-
(3)
Message transmission (example)
Reading range start and range end in Channel 1 from No. 2 station is shown below.
Relative address of range start in Channel 1: 001BH (Register No.40028), Data number: 02H
Command message composition (byte)
Upper
00H
Transaction Identifier
Lower
00H
Protocol Identifier
Upper
00H
Lower
00H
Upper
00H
Length Unit Identifier
Lower
06H
Station No.
02H
Function code
03H
Read-out start No.
Upper
00H
(relative address)
Lower
1BH
Read-out word
Upper
00H
number
Lower
02H
* Meaning of data to be read
Channel 1 Range start
(contents of the first word data)
Channel 1 Range end
(contents of the next word data)
Response message composition (byte)
Upper
00H
Transaction Identifier
Lower
00H
Protocol Identifier
Upper
00H
Lower
00H
Upper
00H
Length Unit Identifier
Lower
07H
Station No.
02H
Function code
03H
04H
Read-out byte number
Contents of the
Upper
00H
first word data
Lower
00H
Contents of the
Upper
0FH
next word data
Lower
A0H
00 00H = 0
0F A0H = 4000
Where the unit is °C with decimal point position set at 1,
Channel 1 Range start = 0.0°C
Channel 1 Range end = 400.0°C
Point
For “Point” decimal point, refer to Section 9.1.
-24-
8.2 Read-out of Read-out Only Word Data [ Function code : 04H ]
Function code
04H
(1)
Max. word number readout
in one message
64 words
Relative data address
Register No.
0000H to 07CFH
30001 to 32000
Message composition
Command message composition(byte)
Transaction Identifier
Protocol Identifier
Response message composition(byte)
Upper
Transaction
Identifier
Upper
Lower
Upper
Protocol Identifier
Upper
Lower
Length Unit
Identifier
Lower
Upper
Length Unit
Identifier
Lower
Station No.
Station No.
Function code
Function code
Read-out start No.
Upper
Read-out byte number
(relative address)
Lower
Contents of the
Read-out word
Upper
number
Lower
Lower
}1 to 64
Upper
Lower
Read-out word number×2
Upper
first word data
Lower
Contents of the
Upper
next word data
Lower
Contents of the
last word data
Upper
Lower
~
~
* Arrangement of read-out word data
MSB
LSB
Upper byte of contents of the first word data
Lower byte of contents of the first word data
Upper byte of contents of the next word data
Lower byte of contents of the next word data
~
~
Upper byte of contents of the last word data
Lower byte of contents of the last word data
(2)
Function explanations
Word data of continuous word numbers from the read-out start No. can be read. Read-out word data are
transmitted from the slave station in the order of upper and lower bytes.
-25-
(3)
Message transmission (example)
Reading range start and range end in Channel 2 from No. 1 station is shown below.
Relative address of range start in Channel 2: 0065H (Register No.30102), Data number: 01H
Command message composition (byte)
Upper
00H
Transaction Identifier
Lower
00H
Protocol Identifier
Upper
00H
Lower
00H
Upper
00H
Length Unit Identifier
Lower
06H
Station No.
01H
Function code
04H
Read-out start No.
Upper
00H
(relative address)
Lower
65H
Read-out word
Upper
00H
number
Lower
01H
* Meaning of data to be read
Channel 1 Range start
(contents of the first word data)
Response message composition (byte)
Upper
00H
Transaction Identifier
Lower
00H
Protocol Identifier
Upper
00H
Lower
00H
Upper
00H
Length Unit Identifier
Lower
05H
Station No.
01H
Function code
04H
Read-out byte number
02H
Contents of the
Upper
01H
first word data
Lower
4FH
01 4FH = 335
Where the unit is °C with decimal point position set at 1,
Channel 2 Measured value = 33.5°C
Point
For “Point” decimal point, refer to Section 9.1.
-26-
8.3 Write-in of Continuous Word Data [ Function code : 10H ]
Function code
Max. word number read-out
in one message
Relative data address
Register No.
Kind of data
10H
64 words
0000H to 1386H
1387H to 157BH
157CH to 1B57H
40001 to 44999
45000 to 45500
45501 to 47000
Storage enable data
Storage diable data
Storage enable data
(1)
Message composition
Command message composition(byte)
Transaction Identifier
Upper
Lower
Protocol Identifier
Upper
Lower
Length Unit Identifier
Upper
Lower
Station No.
Function code
Write-in start No.
Upper
(relative address)
Lower
Write-in word
Upper
number
Lower
Write-in byte number
First write-in
Upper
word data
Lower
Next write-in
Upper
word data
Lower
~
Last write-in
word data
Upper
Lower
Response message composition(byte)
Transaction Identifier
Upper
Lower
Protocol Identifier
Upper
Lower
Length Unit Identifier
Upper
Lower
Station No.
Function code
Write-in start No.
Upper
(relative address)
Lower
Write-in word
Upper
number
Lower
}1 to 64
Write-in word
number×2
~
* Arrangement of read-out word data
MSB
LSB
Upper byte of contents of the first word data
Lower byte of contents of the first word data
Upper byte of contents of the next word data
Lower byte of contents of the next word data
~
~
Upper byte of contents of the last word data
Lower byte of contents of the last word data
(2)
Function explanations
Word data of continuous word number is written from write-in start address. Write-in word data are transmitted
from master station in the order of upper and lower bytes.
-27-
(3)
Message transmission (example)
Writing Subtract channel = channel 2, PV shift = 20.0℃, and PV gain = 110.0% in
Channel 1 of No. 1 station is shown below.
Subtract channel = 0002H ( = 2D : channel 2)
PV shift = 00C8H ( = 200D )
Input filter = 044CH ( = 1100D )
Relative address of Subtract channel in Channel 1: 0014H(Register No.40021), Data number: 03H
Command message composition (byte)
Transaction Identifier
Upper
Lower
Protocol Identifier
Upper
Lower
Length Unit Identifier
Upper
Lower
Station No.
Function code
Write-in start No.
Upper
(relative address)
Lower
Write-in word number
Upper
Lower
Write-in byte number
First write-in
Upper
word data
Lower
Next write-in
Upper
word data
Lower
Last write-in
Upper
word data
Lower
Point
Caution
00H
00H
00H
00H
00H
0DH
01H
10H
00H
14H
00H
03H
06H
00H
02H
00H
C8H
04H
4CH
Response message composition (byte)
Transaction Identifier
Upper
Lower
Protocol Identifier
Upper
Lower
Length Unit Identifier
Upper
Lower
Station No.
Function code
Write-in start No.
Upper
(relative address)
Lower
Write-in word number
Upper
Lower
00H
00H
00H
00H
00H
06H
01H
10H
00H
14H
00H
03H
Since the transmission data can not include a decimal point, data of 110.0 is transmitted
as "1100".
For transmission format of each data, refer to the address map (Section 9).
If the write-in command message is sent to any slave station during the FIX process,
response is not returned from it.
-28-
9. ADDRESS MAP AND DATA FORMAT
9.1 Data Format
9.1.1 Transmission data format
Transmitted data is "numeric value" and not "ASCII code".
9.1.2 Control of decimal point
A decimal point is not included on the transmission data.
Align decimal point for data that have decimal point (decimal point is eliminated in transmission, and added in
receiving).
9.1.3 Data with input error
When input error (Over, Under, Burnout or Error) occurs in display data, read data from measured values are as
follows.
Display data
Over
Under
Bunout
Error
Read data
32767
–32767
–32768
–32768
Detection of input error during communication can be performed at address 30173 = Channel status.
9.1.4
Range of write-in data
When data is written in each parameter, the write-in data should be kept within the setting range. PHW accepts the
write-in data beyond the range. However, be careful since the PHW performance will not be guaranteed.
-29-
9.2 Address Map
For detailed contents about individual parameter function or setting range, refer to the operation manual.
Data type Long : long data
Word : word data
Byte : byte data
Bit : Bit data
The data of this address is manipulated in unit of word. 1 data/2 address
The data of this address is manipulated in unit of word. 1 data/1 address
The data of this address is manipulated in unit of byte. A maximum of 2 data/1 address
The data of this address is manipulated in unit of bit. A maximum of 16 data/1 address
9.2.1 Word data [ read-out / write-in ] : Function code [ 03H, 10H ]
Register
No.
4XXXX
40001
40002
40003
40004
40005
40006
40007
40008
40009
40010
40011
40012
40013
40014
40015
40016
40017
40018
40019
40020
40021
40022
40023
40024
40025
40026
40027
40028
40029
40030
40031
40032
40033
40034
40035
40036
40037
40038
40039
40040
40041
40042
40043
40044
40045
40046
40047
40048
40049
to
Data
type
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Byte
Byte
Byte
Byte
Word
Word
Word
Word
Word
Word
Word
Word
Memory contents
Channel 1 Tag 1
setting
(64 words)
Tag 2
Read-out data / Write-in data setting range
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
Remarks
Set Tag 1 (8 characters) by the ASCII code.
Set Tag 2 (8 characters) by the ASCII code.
Color
Input type
Input filter
Unit
Scaling
Masuring start
Masuring end
Engineering start
Engineering end
Decimal point
Square rooter
1 to 14 ( Please refer to Table 1)
0 to 40 ( Please refer to Table 2)
0 to 900 (0 to 900 sec)
0 to 167 ( Please refer to Table 3)
0:OFF, 1:ON
-1000 to 5500 ( Please refer to Table 4)
-1000 to 5500 ( Please refer to Table 4)
-32767 to 32767
-32767 to 32767
0 to 4 ( Please refer to Table 5)
0:OFF, 1:ON
Subtract channel
PV shift
PV gain
0 to 72 (0:Subtract OFF, 1 to 72:channel 1 to 72)
-32767 to 32767
0 to 32767 (0.00 to 327.67%)
Reserve
Reserve
Reserve
Recording mode
Recording type
Range start
Range end
0:With record, 1:Display only
0:Min-Max rec., 1:Point record, 2:Average rec.
-32767 to 32767 ( Please refer to Table 6)
-32767 to 32767 ( Please refer to Table 6)
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Fvalue caluculation
Totalize caluculation
Totalize 1st, 2nd characters
tag
3rd, 4th characters
5th, 6th characters
7th, 8th characters
Totalize unit
Totalize cut value
Totalize scale value
Totalize type
Extern input
Totalize base time
Reset operation
0:OFF, 1:ON
0:OFF, 1:Totalizer, 2:Counter, 3:Timer
Set Totalize Tag (8 characters) by the ASCII code.
0 to 167 ( Please refer to Table 3)
-32767 to 32767 ( Please refer to Table 6)
1 to 32767
0 to 6 ( Please refer to Table 7)
0 to 303 ( Please refer to Table 8)
0:/s, 1:/min, 2:/h, 3:/day
0:OFF, 1:ON
Reserve
Reserve
-30-
Register
No.
40065
to
40129
to
40193
to
40257
to
40321
to
40385
to
40449
to
40513
to
40577
to
40641
to
40705
to
40769
to
40833
to
40897
to
40961
to
41025
to
41089
to
41153
to
41217
to
41281
to
41345
to
41409
to
41473
to
41537
to
41601
to
41665
to
41729
to
41793
to
41857
to
41921
to
41985
to
42049
to
42113
Data
type
Word
Channel 2 setting
Same allocation as in Channel 1
Word
Channel 3 setting
Same allocation as in Channel 1
Word
Channel 4 setting
Same allocation as in Channel 1
Word
Channel 5 setting
Same allocation as in Channel 1
Word
Channel 6 setting
Same allocation as in Channel 1
Word
Channel 7 setting
Same allocation as in Channel 1
Word
Channel 8 setting
Same allocation as in Channel 1
Word
Channel 9 setting
Same allocation as in Channel 1
Word
Channel 10 setting
Same allocation as in Channel 1
Word
Channel 11 setting
Same allocation as in Channel 1
Word
Channel 12 setting
Same allocation as in Channel 1
Word
Channel 13 setting
Same allocation as in Channel 1
Word
Channel 14 setting
Same allocation as in Channel 1
Word
Channel 15 setting
Same allocation as in Channel 1
Word
Channel 16 setting
Same allocation as in Channel 1
Word
Channel 17 setting
Same allocation as in Channel 1
Word
Channel 18 setting
Same allocation as in Channel 1
Word
Channel 19 setting
Same allocation as in Channel 1
Word
Channel 20 setting
Same allocation as in Channel 1
Word
Channel 21 setting
Same allocation as in Channel 1
Word
Channel 22 setting
Same allocation as in Channel 1
Word
Channel 23 setting
Same allocation as in Channel 1
Word
Channel 24 setting
Same allocation as in Channel 1
Word
Channel 25 setting
Same allocation as in Channel 1
Word
Channel 26 setting
Same allocation as in Channel 1
Word
Channel 27 setting
Same allocation as in Channel 1
Word
Channel 28 setting
Same allocation as in Channel 1
Word
Channel 29 setting
Same allocation as in Channel 1
Word
Channel 30 setting
Same allocation as in Channel 1
Word
Channel 31 setting
Same allocation as in Channel 1
Word
Channel 32 setting
Same allocation as in Channel 1
Word
Channel 33 setting
Same allocation as in Channel 1
Word
Channel 34 setting
Same allocation as in Channel 1
Memory contents
Read-out data / Write-in data setting range
-31-
Remarks
Register
No.
to
42177
to
42241
to
42305
to
42369
to
42433
to
42497
to
42561
to
42625
to
42689
to
42753
to
42817
to
42881
to
42945
to
43009
to
43073
to
43137
to
43201
to
43265
to
43329
to
43393
to
43457
to
43521
to
43585
to
43649
to
43713
to
43777
to
43841
to
43905
to
43969
to
44033
to
44097
to
44161
to
Data
type
Memory contents
Read-out data / Write-in data setting range
Word
Channel 35 setting
Same allocation as in Channel 1
Word
Channel 36 setting
Same allocation as in Channel 1
Word
Channel 37 setting
Same allocation as in Channel 1
Word
Channel 38 setting
Same allocation as in Channel 1
Word
Channel 39 setting
Same allocation as in Channel 1
Word
Channel 40 setting
Same allocation as in Channel 1
Word
Channel 41 setting
Same allocation as in Channel 1
Word
Channel 42 setting
Same allocation as in Channel 1
Word
Channel 43 setting
Same allocation as in Channel 1
Word
Channel 44 setting
Same allocation as in Channel 1
Word
Channel 45 setting
Same allocation as in Channel 1
Word
Channel 46 setting
Same allocation as in Channel 1
Word
Channel 47 setting
Same allocation as in Channel 1
Word
Channel 48 setting
Same allocation as in Channel 1
Word
Channel 49 setting
Same allocation as in Channel 1
Word
Channel 50 setting
Same allocation as in Channel 1
Word
Channel 51 setting
Same allocation as in Channel 1
Word
Channel 52 setting
Same allocation as in Channel 1
Word
Channel 53 setting
Same allocation as in Channel 1
Word
Channel 54 setting
Same allocation as in Channel 1
Word
Channel 55 setting
Same allocation as in Channel 1
Word
Channel 56 setting
Same allocation as in Channel 1
Word
Channel 57 setting
Same allocation as in Channel 1
Word
Channel 58 setting
Same allocation as in Channel 1
Word
Channel 59 setting
Same allocation as in Channel 1
Word
Channel 60 setting
Same allocation as in Channel 1
Word
Channel 61 setting
Same allocation as in Channel 1
Word
Channel 62 setting
Same allocation as in Channel 1
Word
Channel 63 setting
Same allocation as in Channel 1
Word
Channel 64 setting
Same allocation as in Channel 1
Word
Channel 65 setting
Same allocation as in Channel 1
Word
Channel 66 setting
Same allocation as in Channel 1
-32-
Remarks
Register
No.
44225
to
44289
to
44353
to
44417
to
44481
to
44545
to
44609
44610
44611
44612
44613
44614
44615
44616
44617
44618
44619
44620
44621
44622
44623
44624
44625
to
44641
to
44657
to
44673
to
44689
to
44705
to
44721
to
44737
to
44753
to
44769
to
44785
to
44801
to
44817
to
44833
to
44849
to
44865
to
44881
to
44897
to
44913
Data
type
Word
Channel 67 setting
Same allocation as in Channel 1
Word
Channel 68 setting
Same allocation as in Channel 1
Word
Channel 69 setting
Same allocation as in Channel 1
Word
Channel 70 setting
Same allocation as in Channel 1
Word
Channel 71 setting
Same allocation as in Channel 1
Word
Channel 72 setting
Same allocation as in Channel 1
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Channel 1
alarm
setting
(16 words)
Memory contents
Read-out data / Write-in data setting range
Alarm
No.1
Alarm type
Set point
0:OFF, 1:H alarm, 2:L alarm
-32767 to 32767 ( Please refer to Table 6)
Alarm
No.2
DO relay No.
Alarm type
Set point
0 to 36 (0:None, 1 to 36:DO1 to 36)
0:OFF, 1:H alarm, 2:L alarm
-32767 to 32767 ( Please refer to Table 6)
Alarm
No.3
DO relay No.
Alarm type
Set point
0 to 36 (0:None, 1 to 36:DO1 to 36)
0:OFF, 1:H alarm, 2:L alarm
-32767 to 32767 ( Please refer to Table 6)
Alarm
No.4
DO relay No.
Alarm type
Set point
0 to 36 (0:None, 1 to 36:DO1 to 36)
0:OFF, 1:H alarm, 2:L alarm
-32767 to 32767 ( Please refer to Table 6)
DO relay No.
Channel 2 alarm setting
0 to 36 (0:None, 1 to 36:DO1 to 36)
Same allocation as in Channel 1
Word
Channel 3 alarm setting
Same allocation as in Channel 1
Word
Channel 4 alarm setting
Same allocation as in Channel 1
Word
Channel 5 alarm setting
Same allocation as in Channel 1
Word
Channel 6 alarm setting
Same allocation as in Channel 1
Word
Channel 7 alarm setting
Same allocation as in Channel 1
Word
Channel 8 alarm setting
Same allocation as in Channel 1
Word
Channel 9 alarm setting
Same allocation as in Channel 1
Word
Channel 10 alarm setting
Same allocation as in Channel 1
Word
Channel 11 alarm setting
Same allocation as in Channel 1
Word
Channel 12 alarm setting
Same allocation as in Channel 1
Word
Channel 13 alarm setting
Same allocation as in Channel 1
Word
Channel 14 alarm setting
Same allocation as in Channel 1
Word
Channel 15 alarm setting
Same allocation as in Channel 1
Word
Channel 16 alarm setting
Same allocation as in Channel 1
Word
Channel 17 alarm setting
Same allocation as in Channel 1
Word
Channel 18 alarm setting
Same allocation as in Channel 1
Word
Channel 19 alarm setting
Same allocation as in Channel 1
Word
Channel 20 alarm setting
Same allocation as in Channel 1
Remarks
Reserve
Reserve
Reserve
Reserve
-33-
Register
No.
to
44929
to
44945
to
44961
to
44977
to
44993
to
45009
to
45025
to
45041
to
45057
to
45073
to
45089
to
45105
to
45121
to
45137
to
45153
to
45169
to
45185
to
45201
to
45217
to
45233
to
45249
to
45265
to
45281
to
45297
to
45313
to
45329
to
45345
to
45361
to
45377
to
45393
to
45409
to
45425
to
Data
type
Memory contents
Read-out data / Write-in data setting range
Word
Channel 21 alarm setting
Same allocation as in Channel 1
Word
Channel 22 alarm setting
Same allocation as in Channel 1
Word
Channel 23 alarm setting
Same allocation as in Channel 1
Word
Channel 24 alarm setting
Same allocation as in Channel 1
Word
Channel 25 alarm setting
Same allocation as in Channel 1
Word
Channel 26 alarm setting
Same allocation as in Channel 1
Word
Channel 27 alarm setting
Same allocation as in Channel 1
Word
Channel 28 alarm setting
Same allocation as in Channel 1
Word
Channel 29 alarm setting
Same allocation as in Channel 1
Word
Channel 30 alarm setting
Same allocation as in Channel 1
Word
Channel 31 alarm setting
Same allocation as in Channel 1
Word
Channel 32 alarm setting
Same allocation as in Channel 1
Word
Channel 33 alarm setting
Same allocation as in Channel 1
Word
Channel 34 alarm setting
Same allocation as in Channel 1
Word
Channel 35 alarm setting
Same allocation as in Channel 1
Word
Channel 36 alarm setting
Same allocation as in Channel 1
Word
Channel 37 alarm setting
Same allocation as in Channel 1
Word
Channel 38 alarm setting
Same allocation as in Channel 1
Word
Channel 39 alarm setting
Same allocation as in Channel 1
Word
Channel 40 alarm setting
Same allocation as in Channel 1
Word
Channel 41 alarm setting
Same allocation as in Channel 1
Word
Channel 42 alarm setting
Same allocation as in Channel 1
Word
Channel 43 alarm setting
Same allocation as in Channel 1
Word
Channel 44 alarm setting
Same allocation as in Channel 1
Word
Channel 45 alarm setting
Same allocation as in Channel 1
Word
Channel 46 alarm setting
Same allocation as in Channel 1
Word
Channel 47 alarm setting
Same allocation as in Channel 1
Word
Channel 48 alarm setting
Same allocation as in Channel 1
Word
Channel 49 alarm setting
Same allocation as in Channel 1
Word
Channel 50 alarm setting
Same allocation as in Channel 1
Word
Channel 51 alarm setting
Same allocation as in Channel 1
Word
Channel 52 alarm setting
Same allocation as in Channel 1
-34-
Remarks
Register
No.
45441
to
45457
to
45473
to
45489
to
45505
to
45521
to
45537
to
45553
to
45569
to
45585
to
45601
to
45617
to
45633
to
45649
to
45665
to
45681
to
45697
to
45713
to
45729
to
45745
to
45761
to
45825
45826
45827
45828
45829
45830
45831
45832
45833
45834
45835
45836
45837
45838
45839
45840
45841
45842
45843
to
45861
to
45879
Data
type
Word
Channel 53 alarm setting
Same allocation as in Channel 1
Word
Channel 54 alarm setting
Same allocation as in Channel 1
Word
Channel 55 alarm setting
Same allocation as in Channel 1
Word
Channel 56 alarm setting
Same allocation as in Channel 1
Word
Channel 57 alarm setting
Same allocation as in Channel 1
Word
Channel 58 alarm setting
Same allocation as in Channel 1
Word
Channel 59 alarm setting
Same allocation as in Channel 1
Word
Channel 60 alarm setting
Same allocation as in Channel 1
Word
Channel 61 alarm setting
Same allocation as in Channel 1
Word
Channel 62 alarm setting
Same allocation as in Channel 1
Word
Channel 63 alarm setting
Same allocation as in Channel 1
Word
Channel 64 alarm setting
Same allocation as in Channel 1
Word
Channel 65 alarm setting
Same allocation as in Channel 1
Word
Channel 66 alarm setting
Same allocation as in Channel 1
Word
Channel 67 alarm setting
Same allocation as in Channel 1
Word
Channel 68 alarm setting
Same allocation as in Channel 1
Word
Channel 69 alarm setting
Same allocation as in Channel 1
Word
Channel 70 alarm setting
Same allocation as in Channel 1
Word
Channel 71 alarm setting
Same allocation as in Channel 1
Word
Channel 72 alarm setting
Same allocation as in Channel 1
Memory contents
Read-out data / Write-in data setting range
Word
Remarks
Reserve
Reserve
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Display
group 1
setting
(18 words)
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
Display No.1
Display No.2
Display No.3
Display No.4
Display No.5
Display No.6
Display No.7
Display No.8
Display No.9
Display No.10
Display group 2 setting
Set Display name (16 characters) by the ASCII code.
Word
Display group 3 setting
Same allocation as Display group 1
Word
Display group 4 setting
Same allocation as Display group 1
Display
name
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
0:None, 1 to 72:ch1 to 72
Same allocation as Display group 1
-35-
Register
No.
to
45897
to
45915
to
45933
to
45951
to
45969
45970
45971
45972
45973
45974
45975
to
45980
to
45985
to
45990
to
45995
to
46000
to
46005
to
46010
46011
46012
46013
46014
to
46018
to
46022
to
46026
to
46030
to
46034
to
46038
to
46042
to
46051
46052
46053
46054
46055
46056
46057
46058
46059
46060
46061
46062
46063
46064
46065
46066
Data
type
Memory contents
Read-out data / Write-in data setting range
Word
Display group 5 setting
Same allocation as Display group 1
Word
Display group 6 setting
Same allocation as Display group 1
Word
Display group 7 setting
Same allocation as Display group 1
Word
Display group 8 setting
Same allocation as Display group 1
Display
group 1
setting2
(5 words)
0:Vertical, 1:Horizontal
0:CH No.disp., 1:Tag No.disp., 2:Unit Disp.
0:OFF, 1:ON
Word
Word
Word
Word
Word
Word
Word
Reserve
Trend direction
Channel index
Scale display
Reserve
Display divided
Display group 2 setting2
1 to 20
Same allocation as Display group 1
Word
Display group 3 setting2
Same allocation as Display group 1
Word
Display group 4 setting2
Same allocation as Display group 1
Word
Display group 5 setting2
Same allocation as Display group 1
Word
Display group 6 setting2
Same allocation as Display group 1
Word
Display group 7 setting2
Same allocation as Display group 1
Word
Display group 8 setting2
Same allocation as Display group 1
Word
Word
Word
Word
Word
Display
group 1
setting3
(4 words) Analog meter
Display group 2 setting3
0:Bar graph, 1:Analog meter
Same allocation as Display group 1
Word
Display group 3 setting3
Same allocation as Display group 1
Word
Display group 4 setting3
Same allocation as Display group 1
Word
Display group 5 setting3
Same allocation as Display group 1
Word
Display group 6 setting3
Same allocation as Display group 1
Word
Display group 7 setting3
Same allocation as Display group 1
Word
Display group 8 setting3
Same allocation as Display group 1
Reserve
Reserve
Reserve
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Remarks
Reserve
Reserve
Reserve
Totalize cycle
0 to 9 ( Please refer to Table 9)
Monthly base day
1 to 31 ( 1 to 31day)
Reserve
Reserve
Reserve
External input
H-P, L-P timer cycle
AVG timer cycle
SUM timer cycle
Formula1 1st calculation
Math CH
37 setting
argument1
(36 words)
argument2
2nd calculation
argument1
argument2
0 to 303 ( Please refer to Table 8)
1 to 32767 (1 to 32767min)
1 to 32767 (1 to 32767min)
1 to 32767 (1 to 32767min)
( Please refer to Table 10)
-36-
Register
No.
46067
46068
46069
46070
46071
46072
to
42584
42585
42586
46097
to
46133
to
46169
to
46205
to
46241
to
46277
to
46313
to
46349
to
46385
to
46421
to
46457
to
46493
to
46529
to
46565
to
46601
to
46637
to
46673
to
46709
to
46745
to
46781
to
46817
to
46853
to
46889
to
46925
to
46961
to
46997
to
47033
to
47069
Data
type
Word
Word
Word
Word
Word
Word
Memory contents
Read-out data / Write-in data setting range
Formula1 3rd calculation
argument1
argument2
Formula2 1st calculation
argument1
argument2
Word
Word
Word
Word
Formula4 3rd calculation
argument1
argument2
Math channel 38 setting
Same allocation as Channel 37
Word
Math channel 39 setting
Same allocation as Channel 37
Word
Math channel 40 setting
Same allocation as Channel 37
Word
Math channel 41 setting
Same allocation as Channel 37
Word
Math channel 42 setting
Same allocation as Channel 37
Word
Math channel 43 setting
Same allocation as Channel 37
Word
Math channel 44 setting
Same allocation as Channel 37
Word
Math channel 45 setting
Same allocation as Channel 37
Word
Math channel 46 setting
Same allocation as Channel 37
Word
Math channel 47 setting
Same allocation as Channel 37
Word
Math channel 48 setting
Same allocation as Channel 37
Word
Math channel 49 setting
Same allocation as Channel 37
Word
Math channel 50 setting
Same allocation as Channel 37
Word
Math channel 51 setting
Same allocation as Channel 37
Word
Math channel 52 setting
Same allocation as Channel 37
Word
Math channel 53 setting
Same allocation as Channel 37
Word
Math channel 54 setting
Same allocation as Channel 37
Word
Math channel 55 setting
Same allocation as Channel 37
Word
Math channel 56 setting
Same allocation as Channel 37
Word
Math channel 57 setting
Same allocation as Channel 37
Word
Math channel 58 setting
Same allocation as Channel 37
Word
Math channel 59 setting
Same allocation as Channel 37
Word
Math channel 60 setting
Same allocation as Channel 37
Word
Math channel 61 setting
Same allocation as Channel 37
Word
Math channel 62 setting
Same allocation as Channel 37
Word
Math channel 63 setting
Same allocation as Channel 37
Word
Math channel 64 setting
Same allocation as Channel 37
Word
Math channel 65 setting
Same allocation as Channel 37
-37-
Remarks
Register
No.
to
47105
to
47141
to
47177
to
47213
to
47249
to
47285
to
47321
to
47357
47358
to
47475
47476
47477
to
47482
Data
type
Memory contents
Word
Math channel 66 setting
Same allocation as Channel 37
Word
Math channel 67 setting
Same allocation as Channel 37
Word
Math channel 68 setting
Same allocation as Channel 37
Word
Math channel 69 setting
Same allocation as Channel 37
Word
Math channel 70 setting
Same allocation as Channel 37
Word
Math channel 71 setting
Same allocation as Channel 37
Word
Math channel 72 setting
Same allocation as Channel 37
Word
Word
Constant1
Value
Dicimal point
-32767 to 32767 ( Please refer to Table 11)
0 to 4
Word
Word
Word
Constant60
Value
Dicimal point
-32767 to 32767 ( Please refer to Table 11)
0 to 4
Word
Time setting
47483 Word
47484 Word
47485 Word
47486
47487
47488
47489
47490
47491
47492
47493
47494
47495
47496
47497
47498
47499
47500
47501
47502
47503
47504
47505
47506
47507
47508
47509
47510
47511
47512
47513
47514
to
47531
47532
47533
47534
47535
47536
47537
Read-out data / Write-in data setting range
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Time set request
Year
1:Time set request.(Automatically clear)
Month
Day
1 to 12 ( 1 to 12month)
Hour
Minute
1 to 99 ( 2001 to 2099year)
1 to 31 ( 1 to 31day)
Remarks
Reserve
Reserve
Attention:
Don’t change the
time
absolutely during
recording and
totalizing.
0 to 23 ( 0 to 23hour)
0 to 59 ( 0 to 59minute)
Reserve
Reserve
Refreshment cycle
0 to 19 ( Please refer to Table 12)
LCD lights-out time
File division cycle
Memory full alarm
Record data format
FValue calculation
0 to 60 ( 0: ON all the time, 1 to 60:1 to 60min)
0 to 4 ( Please refer to Table 13 )
0 to 36 (0:None, 1 to 36:DO1 to 36)
0:Ascii, 1:Binary
-32767 to 32767 (-3276.7 to 3276.7°C)
-32767 to 32767 (-3276.7 to 3276.7°C)
0 to 4 ( Please refer to Table 14)
Reserve
Target temperture
Z value
Decimal point
Reserve
Reset temperature
Battery alarm
Date format
File overwrite
Display compression
-32767 to 32767 (-3276.7 to 3276.7°C)
0 to 36 (0:None, 1 to 36:DO1 to 36)
0 to 4 ( Please refer to Table 15 )
0:OFF, 1:ON
0:1/1, 1: 1/10, 2:1/30, 3:1/60
Alarm hysteresis
Alarm latch
MODBUS Station No.
0 to 10000 ( 0.00 to 100.00%)
0:OFF, 1:ON
0 to 255 ( 0: Communication OFF)
Reserve
Reserve
Reserve
Configuration password
CF manager password
Record password
0 to 9999
0 to 9999
0 to 9999
Reserve
Reserve
Message
Messege
No.1
setting
(22 Words)
1st, 2nd characters
Set Message (32 characters) by the ASCII code.
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
-38-
Register
No.
47538
47539
47540
47541
47542
47543
47544
47545
47546
47547
47548
47549
47550
47551
47552
47553
to
47575
to
47597
to
47619
to
47641
to
47663
to
47685
to
47707
to
47729
to
47751
47752
47753
47754
47755
47756
47757
47758
to
47765
to
47772
to
47779
to
47786
to
47793
to
47800
to
47807
to
47814
to
47821
to
47828
to
47835
to
47836
Data
type
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Word
Word
Word
Word
Word
Word
Memory contents
Messege
Message
No.1
setting
(22 Words)
Read-out data / Write-in data setting range
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
Reserve
Reserve
Messege timing
Messege timing argument 1
Messege timing argument 2
0 to 2 ( Please refer to Table 16)
Reserve
Messege No.2 setting
Same allocation as Message No. 1
Word
Messege No.3 setting
Same allocation as Message No. 1
Word
Messege No.4 setting
Same allocation as Message No. 1
Word
Messege No.5 setting
Same allocation as Message No. 1
Word
Messege No.6 setting
Same allocation as Message No. 1
Word
Messege No.7 setting
Same allocation as Message No. 1
Word
Messege No.8 setting
Same allocation as Message No. 1
Word
Messege No.9 setting
Same allocation as Message No. 1
Word
Messege No.10 setting
Same allocation as Message No. 1
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Original unit 1 setting
Original unit 2 setting
Same allocation as Original unit 1
Byte
Original unit 3 setting
Same allocation as Original unit 1
Byte
Original unit 4 setting
Same allocation as Original unit 1
Byte
Original unit 5 setting
Same allocation as Original unit 1
Byte
Original unit 6 setting
Same allocation as Original unit 1
Byte
Original unit 7 setting
Same allocation as Original unit 1
Byte
Original unit 8 setting
Same allocation as Original unit 1
Byte
Original unit 9 setting
Same allocation as Original unit 1
Byte
Original unit 10 setting
Same allocation as Original unit 1
Byte
Original unit 11 setting
Same allocation as Original unit 1
Byte
Original unit 12 setting
Same allocation as Original unit 1
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th characters
Set original unit (7 characters) by the ASCII code.
Reserve
Reserve
Reserve
Word
Word
Remarks
Reserve
Reserve
DI 1 function
0 to 5 ( Please refer to Table 17)
-39-
Register
No.
47837
47838
47839
47840
47841
47842
47843
47844
47845
47846
47847
47848
47849
47850
47851
47852
to
47901
47902
47903
47904
47905
47906
47907
47908
47909
47910
47911
47912
47913
47914
47915
47916
47917
47918
47919
47920
47921
47922
47923
47924
47925
to
Data
type
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Memory contents
Read-out data / Write-in data setting range
DI 2 function
DI 3 function
DI 4 function
DI 5 function
DI 6 function
DI 7 function
DI 8 function
DI 9 function
DI 10 function
DI 11 function
DI 12 function
DI 13 function
DI 14 function
DI 15 function
DI 16 function
PILC data
Serial number
Remarks
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
0 to 5
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
Following register No.48881 to 49000 will not be recorded in the main unit.
Register data request
48900 Word
1:Register data (Automatically clear)
48901 Word
Fvalue calculation reset request
48902 Word
1:Fvalue reset (Automatically clear)
48903 Word
Prohibiting the writing to the memory card
0:Writing permission, 1:Writing prohibition
48904 Bit
Recorder control
( Please refer to Table 18)
48905 Bit
Message request
( Please refer to Table 19)
Totalize reset request
48906 Word
1:Totalize reset (Automatically clear)
Alarm latch clear request
48907 Word
1:Alarm latch clear (Automatically clear)
48908 Word
to
48961 Word
Communication input 1 : M01
-32767 to 32767
48962 Word
Communication input 2 : M02
-32767 to 32767
48963 Word
Communication input 3 : M03
-32767 to 32767
48964 Word
Communication input 4 : M04
-32767 to 32767
48965 Word
Communication input 5 : M05
-32767 to 32767
48966 Word
Communication input 6 : M06
-32767 to 32767
48967 Word
Communication input 7 : M07
-32767 to 32767
48968 Word
Communication input 8 : M08
-32767 to 32767
48969 Word
Communication input 9 : M09
-32767 to 32767
-40-
Reserve
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Do not write
Reserve
Do not write
Do not write
Register
No.
48970
48971
48972
48973
48974
48975
48976
48977
48978
48979
48980
48981
48982
48983
48984
48985
48986
48987
48988
48989
48990
48991
48992
48993
48994
48995
48996
to
Data
type
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Memory contents
Read-out data / Write-in data setting range
Communication input10 : M10
Communication input11 : M11
Communication input12 : M12
Communication input13 : M13
Communication input14 : M14
Communication input15 : M15
Communication input16 : M16
Communication input17 : M17
Communication input18 : M18
Communication input19 : M19
Communication input20 : M20
Communication input21 : M21
Communication input22 : M22
Communication input23 : M23
Communication input24 : M24
Communication input25 : M25
Communication input26 : M26
Communication input27 : M27
Communication input28 : M28
Communication input29 : M29
Communication input30 : M30
Communication input31 : M31
Communication input32 : M32
Communication input33 : M33
Communication input34 : M34
Communication input35 : M35
Communication input36 : M36
Remarks
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
-32767 to 32767
Do not write
The following addresses are recorded in the main unit.
Register
No.
49001
49002
49003
49004
49005
49006
49007
49008
49009
49010
49011
49012
49013
49014
49015
49016
49017
49018
49019
49020
49021
49022
49023
49024
49025
49026
49027
49028
49029
49030
49031
49032
49033
Data
type
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Word
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Memory contents
Read-out data / Write-in data setting range
Remarks
Reserve
E-mail function
FTP server function
FTP access control
Web server function
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
Reserve
Reserve
MODBUS TCP/IP function
1st number
IP address
2nd number
3rd number
4th number
Subnet mask
1st number
2nd number
3rd number
4th number
1st number
Default gateway
2nd number
3rd number
4th number
1st number
SMTP IP address
2nd number
3rd number
4th number
Sender's mail address 1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
0:OFF, 1:ON
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
Set address (64 characters) by the ASCII code.
-41-
Register
No.
49034
49035
49036
49037
49038
49039
49040
49041
49042
49043
49044
49045
49046
49047
49048
49049
49050
49051
49052
49053
49054
49055
49056
49057
49058
49059
49060
49061
49062
49063
49064
49065
49066
49067
49068
49069
49070
49071
49072
49073
49074
49075
49076
49077
49078
49079
49080
49081
49082
49083
49084
49085
49086
49087
49088
49089
49090
49091
49092
49093
49094
49095
49096
49097
49098
Data
type
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Memory contents
Sender's mail address
Sender's mail name
Receiver's mail
address 1
Read-out data / Write-in data setting range
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
33th, 34th characters
35th, 36th characters
37th, 38th characters
39th, 40th characters
41th, 42th characters
43th, 44th characters
45th, 46th characters
47th, 48th characters
49th, 50th characters
51th, 52th characters
53th, 54th characters
55th, 56th characters
57th, 58th characters
59th, 60th characters
61th, 62th characters
63th, 64th characters
1st, 2nd characters
Set name (32 characters) by the ASCII code.
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
1st, 2nd characters
Set address (64 characters) by the ASCII code.
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
33th, 34th characters
35th, 36th characters
37th, 38th characters
39th, 40th characters
41th, 42th characters
43th, 44th characters
45th, 46th characters
47th, 48th characters
49th, 50th characters
51th, 52th characters
-42-
Remarks
Register
No.
49099
49100
49101
49102
49103
49104
49105
to
49137
to
49169
to
49201
to
49233
to
49265
to
49297
to
49329
to
49331
49332
49333
49334
49335
49336
49337
49338
49339
49340
49341
49342
49343
49344
49345
to
49359
to
49373
to
49387
to
49401
to
49415
to
49429
to
49443
to
49451
49452
49453
49454
49455
49456
49457
49458
49459
49460
49461
49462
49463
Data
type
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Memory contents
Read-out data / Write-in data setting range
53th, 54th characters
55th, 56th characters
57th, 58th characters
59th, 60th characters
61th, 62th characters
63th, 64th characters
Receiver's mail address 2
Same allocation as Receiver's mail address 1
Receiver's mail
address 1
Byte
Receiver's mail address 3
Same allocation as Receiver's mail address 1
Byte
Receiver's mail address 4
Same allocation as Receiver's mail address 1
Byte
Receiver's mail address 5
Same allocation as Receiver's mail address 1
Byte
Receiver's mail address 6
Same allocation as Receiver's mail address 1
Byte
Receiver's mail address 7
Same allocation as Receiver's mail address 1
Byte
Receiver's mail address 8
Same allocation as Receiver's mail address 1
Word
Reserve
Reserve
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Word
Byte
User 1
setting
User 2 setting
Same allocation as User 1
Byte
User 3 setting
Same allocation as User 1
Byte
User 4 setting
Same allocation as User 1
Byte
User 5 setting
Same allocation as User 1
Byte
User 6 setting
Same allocation as User 1
Byte
User 7 setting
Same allocation as User 1
Byte
User 8 setting
Same allocation as User 1
1st, 2nd characters
Set name (16 characters) by the ASCII code.
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
Set password (8 characters) by the ASCII code.
Password 1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
0: Administrator, 1: Guest
User level
User
name
Reserve
Word
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Remarks
Reserve
Reserve
E-mail
trigger 1
setting
Title
1st, 2nd characters
Set title (32 characters) by the ASCII code.
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
-43-
Register
No.
49464
49465
49466
49467
49468
49469
49470
49471
49472
49473
49474
49475
49476
49477
49478
49479
49480
49481
49482
49483
49484
49485
49486
49487
49488
49489
49490
49491
49492
49493
49494
49495
49496
49497
49498
49499
49500
49501
49502
49503
49504
49505
to
49559
to
49613
to
49667
to
49721
to
49775
to
49829
to
49883
to
49937
to
49991
to
49999
Data
type
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Byte
Word
Word
Word
Word
Word
Word
Byte
Memory contents
E-mail
trigger 1
setting
Read-out data / Write-in data setting range
Title
27th, 28th characters
29th, 30th characters
31th, 32th characters
Text 1
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
Text 2
1st, 2nd characters
3rd, 4th characters
5th, 6th characters
7th, 8th characters
9th, 10th characters
11th, 12th characters
13th, 14th characters
15th, 16th characters
17th, 18th characters
19th, 20th characters
21th, 22th characters
23th, 24th characters
25th, 26th characters
27th, 28th characters
29th, 30th characters
31th, 32th characters
Trigger timing
Trigger timing argument 1
Trigger timing argument 2
PV value affixation
Receiver's mail address No.
Set text1 (32 characters) by the ASCII code.
Set text2 (32 characters) by the ASCII code.
( Please refer to Table 20)
0:OFF, 1:ON
(Please refer to Table 21)
Reserve
E-mail trigger 2 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 3 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 4 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 5 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 6 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 7 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 8 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 9 setting
Same allocation as E-mail trigger 1
Byte
E-mail trigger 10 setting
Same allocation as E-mail trigger 1
Word
Word
Remarks
Reserve
Reserve
Reserve
Final address
-44-
9.2.2 Word data [ read-out only ] : Function code [ 04H ]
Register
No.
3XXXX
30001
30002
30003
30004
30005
30006
to
30076
to
30083
30084
30085
30086
30087
30088
30089
30090
30091
30092
30093
30094
30095
30096
30097
30098
30099
30100
30101
30102
30103
to
30171
30172
30173
30174
30175
to
30244
30245
30246
30247
30248
to
30387
30388
30389
30390
30391
30392
to
30531
30532
30533
30534
30535
30536
to
30675
30676
30677
Data
type
Memory contents
Read-out data
Bit
Bit
Bit
Bit
Bit
Bit
System information
Word
Memory cord utilization
0 to 1000 (0.00 to 100.0%, 100.0%=Memory FULL)
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Word
Word
Word
Channel Alarm
information
(Please refer to Table 25)
Remarks
(Please refer to Table 22)
Reserve
DO information
DO1 to 16
DO17 to 32
DO33 to 36
DI information
(Please refer to Table 23)
( Please refer to Table 24)
Reserve
Reserve
Word
Word
Word
Word
Word
Word
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Measured value
Channel status
Totalizing value
Totalizing start
time
Totalizing end
time
Previous
totalized value
Channel 1 to 4
Channel 5 to 8
Channel 9 to 12
Channel 13 to 16
Channel 17 to 20
Channel 21 to 24
Channel 25 to 28
Channel 29 to 32
Channel 33 to 36
Channel 37 to 40
Channel 41 to 44
Channel 45 to 48
Channel 49 to 52
Channel 53 to 56
Channel 57 to 60
Channel 61 to 64
Channel 65 to 68
Channel 69 to 72
Channel 1
Channel 2
Channel 3
-32767 to 32767 ( No decimal point )
-32767 to 32767 ( No decimal point )
-32767 to 32767 ( No decimal point )
Channel 71
Channel 72
Channel 1
Channel 2
Channel 3
-32767 to 32767 ( No decimal point )
-32767 to 32767 ( No decimal point )
0:Normal, 1:Burnout, 2:Over, 3:Under, 4:Error
0:Normal, 1:Burnout, 2:Over, 3:Under, 4:Error
0:Normal, 1:Burnout, 2:Over, 3:Under, 4:Error
Channel 72
Channel 1
Channel 1
Channel 2
Channel 2
0:Normal, 1:Burnout, 2:Over, 3:Under, 4:Error
-999999999 to 999999999 ( No decimal point )
Channel 72
Channel 72
Channel 1
Channel 1
Channel 2
Channel 2
-999999999 to 999999999 (No decimal point )
-999999999 to 999999999 (No decimal point )
Greenwich Time
Greenwich Time
Channel 72
Channel 72
Channel 1
Channel 1
Channel 2
Channel 2
Greenwich Time
Channel 72
Channel 72
Channel 1
Greenwich Time
Greenwich Time
Greenwich Time
-999999999 to 999999999 (No decimal point )
-45-
Register
No.
30678
30679
30680
to
30819
30820
30821
30822
30823
30824
to
30963
30964
30965
30966
30967
30968
to
31107
31108
31109
to
31200
Data
type
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Long
Memory contents
Previous
totalized value
Previous
totalized start
time
Previous
totalized end
time
Long
Long
Word
Word
Channel 1
Channel 2
Channel 2
Channel 72
Channel 72
Channel 1
Channel 1
Channel 2
Channel 2
Read-out data
Remarks
-999999999 to 999999999 (No decimal point )
-999999999 to 999999999 (No decimal point )
Greenwich Time
Greenwich Time
Channel 72
Channel 72
Channel 1
Channel 1
Channel 2
Channel 2
Greenwich Time
Channel 72
Channel 72
Greenwich Time
Greenwich Time
Greenwich Time
Reserve
Reserve
Reserve
Final address
Notes) y The area marked (Do not use) is a reserve area. Do not write in there.
y Write 0 into the areas without data.
-46-
9.3 Additional Explanation of Address Map
Table 1 Channel color code
Data
1
2
3
4
5
6
7
8
9
10
11
12
13
14
color
Red
Blue
Violet
Green
Sky blue
Yellow
Gray
Indigo
Dark red
Purple
Deep green
Pale blue
Yellowish green
Silver
Table 2 Input type code
Data
0
1
2
3
4
5
6
7
8
9
10
11
12
20
21
30
31
32
33
40
Input type
Skip
K-Type TC
E-Type TC
J-Type TC
T-Type TC
R-Type TC
S-Type TC
B-Type TC
N-Type TC
W-Type TC
L-Type TC
U-Type TC
PN-Type TC
Pt100
JPt100
50mV
500mV
1-5V
0-5V
Other channel
Skip
Initial decimal point
0
Thermocouple
1
Resistance bulb
1
2
1
DC voltage
3
Other channnel
0
Note) When position of decimal point varies with input type, initialize it.
-47-
Table 3 Unit code
Data
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Data
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
Unit
°C
°F
%RH
vol%
Data
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
t/d
kg/d
g/d
m3/d
l/d
t/h
kg/h
g/h
m3/h
l/h
Unit
mN
N
N・m
J
kJ
Data
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
mm/s
mm/min
mm/h
m/s
m/min
m/h
rps
rpm
rph
m/s2
rad/s
km/h
Unit
t/min
kg/min
g/min
m3/min
l/min
Data
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
t/s
kg/s
g/s
m3/s
l/s
mbar
bar
N/mm2
N/m2
Unit
us
ms
s
min
h
day
mV
V
kV
uA
mA
A
Hz
dB
W
kW
VA
kVA
Data
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
Unit
mPa
Pa
kPa
MPa
mm
cm
m
ml
L
kl
mm3
cm3
m3
Unit
Var
kVar
uS/cm
uF
F
C
mH
H
mohm
ohm
kohm
Mohm
lx
cd
lm
cd/m2
Data
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
Data
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
Unit
mm2
cm2
m2
g
kg
t
g/cm3
kg/cm3
g/m3
kg/m3
g/l
kg/l
g/ml
Unit
uSv/h
mSv/h
nGy/h
uGy/h
um
Pa・s
mPa・s
*Unit1
*Unit2
*Unit3
*Unit4
*Unit5
*Unit6
Note) The unit that was made in Unit 1 to 12: Original unit definition is selected.
Table 4 Masuring start, Masuring end setting limit
Input type
50mV
500mV
1-5V
0-5V
Masuring start, Masuring end limit
–1000 to 5500 (–10.00 to 55.00mV)
–100 to 5500 (–10.0 to 550.0mV)
500 to 5500 (0.500 to 5.500V)
–100 to 5500 (–0.100 to 5.500V)
Table 5 Decimal point code
Decimal point data
0
1
2
3
4
Setting data
–32767 to 32767
–3276.7 to 3276.7
–327.67 to 327.67
–32.767 to 32.767
–3.2767 to 3.2767
-48-
Data
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
Unit
ppm
ppmNH3
ppmSO2
ppmH2S
ppmCO
ppmO2
ppmNOx
ppb
pH
mol
%
%H2
%CO2
%He
%Ar
%O2
%NaCl
%CO
Data
162
163
164
165
166
167
Unit
*Unit 7
*Unit 8
*Unit 9
*Unit 10
*Unit 11
*Unit 12
Table 6 Data setting limit
・With Fvalue calculation OFF
Input type TC, Pt
K-Type TC
E-Type TC
J-Type TC
T-Type TC
R-Type TC
S-Type TC
B-Type TC
N-Type TC
W-Type TC
L-Type TC
U-Type TC
PN-Type TC
Pt100
JPt100
°C (Centigrade)
Range start, Range end
Alarm No.1 to 4 set point
Totalize cut value
–2300 to 14000 (–230.0 to 1400.0°C)
–2300 to 8300 (–230.0 to 830.0°C)
–2300 to 11300 (–230.0 ot 1130.0°C)
–2300 to 4300 (–230.0 to 430.0°C)
–300 to 17900 (–30.0 to 1790.0°C)
–300 to 17900 (–30.0 to 1790.0°C)
3700 to 17900 (370.0 to 1790.0°C)
–300 to 13300 (–30.0 to 1330.0°C)
–300 to 17900 (–30.0 to 1790.0°C)
–2300 to 9300 (–230.0 to 930.0°C)
–2300 to 4300 (–230.0 to 430.0°C)
–300 to 13300 (–30.0 to 1330.0°C)
–2300 to 6300 (–230.0 to 630.0°C)
–2300 to 6300 (–230.0 to 630.0°C)
°F (Fahrenheit)
Range start, Range end
Alarm No.1 to 4 set point
Totalize cut value
–3820 to 25520 (–382.0 to 2552.0°F)
–3820 to 15260 (–382.0 to 1526.0°F)
–3820 to 20660 (–382.0 to 2066.0°F)
–3820 to 8060 (–382.0 to 806.0°F)
–220 to 32540 (–22.0 to 3254.0°F)
–220 to 32540 (–22.0 to 3254.0°F)
6980 to 32540 (698.0 to 3254.0°F)
–220 to 24260 (–22.0 to 2426.0°F)
–220 to 32540 (–22.0 to 3254.0°F)
–3820 to 17060 (–382.0 to 1706.0°F)
–3820 to 8060 (–382.0 to 806.0°F)
–220 to 24260 (–22.0 to 2426.0°F)
–3820 to 11660 (–382.0 to 1166.0°F)
–3820 to 11660 (–382.0 to 1166.0°F)
Scaling OFF
Range start, Range end
Alarm No.1 to 4 set point
Totalize cut value
–1000 to 5500 (–10.00 to 55.00mV)
–100 to 5500 (–10.0 to 550.0mV)
500 to 5500 (0.500 to 5.500V)
–100 to 5500 (–0.100 to 5.500V)
Scaling ON
Range start, Range end
Alarm No.1 to 4 set point
Totalize cut value
Input type Volt
50mV
500mV
1-5V
0-5V
・With F value calculation ON or Input type other channel
Range start, Range end
Alarm No.1 to 4 set point
Totalize cut value
–32767 to 32767 (Please refer to Table 14)
All type
Table 7 Totalize type code
Data
0
1
3
6
15
Totalize type
Daily
Monthly
Annual
External
OFF
-49-
–32767 to 32767 (Please refer to Table 5)
Table 8 External input code
Input
DI 1
DI 2
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
DI 9
DI 10
DI 11
DI 12
DI 13
DI 14
DI 15
DI 16
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Data
16
17
18
19
20
21
22
Input
CH 1 Alarm No.1
CH 1 Alarm No.2
CH 1 Alarm No.3
CH 1 Alarm No.4
CH 2 Alarm No.1
CH 2 Alarm No.2
CH 2 Alarm No.3
296
297
298
299
300
301
302
303
CH71 Alarm No.1
CH71 Alarm No.2
CH71 Alarm No.3
CH71 Alarm No.4
CH72 Alarm No.1
CH72 Alarm No.2
CH72 Alarm No.3
CH72 Alarm No.4
…
Data
Table 9 Totalize cycle code
Data
Totalize cycle
10min
20min
30min
1hour
2hour
3hour
4hour
6hour
12our
24hour
0
1
2
3
4
5
6
7
8
9
Table 10 Formula code
calculation data = four rules calculation data + function data * 256
Data
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Function data
None
ABS
POW
SQR
LOG
LN
EXP
RH
MAX
MIN
H-P
L-P
AVG
SUM
Data
0
1
2
3
4
Four rules calculation data
Formula end
+ (Please set it to the 1st calculation)
–
*
/
argument1,2 data = argument type * 256 + data number
Data
0
1
2
3
4
5
Argument type
Input channel
Totalizer input
Digital input
Communication input
Constant
Temporary data
Data number limit
0 to 71 (Channel 1 to 72 : C01 to C72 )
0 to 71 (Channel totalizer 1 to 72 : T01 to T72 )
0 to 15 (DI1 to 16 : D01 to D16 )
0 to 35 (Communication input 1 to 36 : M01 to M36)
0 to 59 (Constant 1 to 60 : K01 to K60 )
0 to 2 (Temporary data 1 to 3 : B01 to B03 )
-50-
When setting “POW(C01, T02)*K03” in Formula 1 of Channel 37, set the following data.
Address
46061
46062
46063
46064
46065
46066
46067
46068
46069
Data
513
0
257
3
1026
0
0
0
0
Display
(+)POW
C01
T02
*
K03
(none)
(End)
(none)
(none)
Breakdown
Four rules calc. data : "+" (1) + Function data : "POW"(2 * 256)
Argument type : Input channel(0 * 256) + Data number : 1 (0)
Argument type : Totalizer input(1 * 256) + Data number : 2 (1)
Four rules calc. data : "*" (3) +
Function data : none (0 * 256)
Argument type : Constant(4 * 256) + Data number : 3 (2)
Table 11 Constant data
Decimal point data
0
1
2
3
4
Constant data
–32767 to 32767
–3276.7 to 3276.7
–327.67 to 327.67
–32.767 to 32.767
–3.2767 to 3.2767
Table 12 Refreshment cycle code
Data
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Date format
1sec
2sec
3sec
5sec
10sec
20sec
30sec
1min
2min
3min
5min
10min
20min
30min
1hour
2hour
3hour
4hour
6hour
12our
Table 13 File division cycle code
Data
0
1
2
3
4
File division cycle
No division
1 hour
1 day
1 week
1 month
Table 14 F Value calculation decimal point code
Decimal point data
0
1
2
3
4
F Value calculation ON channel data
–32767 to 32767
–3276.7 to 3276.7
–327.67 to 327.67
–32.767 to 32.767
–3.2767 to 3.2767
-51-
Table 15 Date format code
Data
0
1
2
3
4
Date format
2005/10/28
28/10/2005
28−Oct−05
10/28/2005
Oct−28−05
Table 16 Message timing data
Message timing argument 1 and 2 have a significant difference according to the contents of Message timing.
Data
0
1
2
3
4
Message timing
None
DI ON
DI OFF
Alarm start
Alarm cancel
argument 1
None
0 to 15 ( DI1 to 16)
0 to 15 ( DI1 to 16)
0 to 71 ( channel 1 to 72 )
0 to 71 ( channel 1 to 72 )
argument 2
None
None
None
0 to 3(Alarm No.1 to 4 )
0 to 3(Alarm No.1 to 4 )
Table 17 DI function code
Data
0
1
2
3
4
5
DI function
Function invalid
Rec start/Rec stop
Fvalue calc. reset
Totalize start/stop
Totalize reset
LCD ON
Table 18 Recorder control
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Contents
Record start/stop
Reserve
Totalize start/stop
LCD Lighting
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Write data
0:Record stop, 1:Record start
0:Totalize stop, 1:Totalize start
0: No change, 1:LCD Lighting
-52-
Table 19 Message request
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Contents
Message No.1 request
Message No.2 request
Message No.3 request
Message No.4 request
Message No.5 request
Message No.6 request
Message No.7 request
Message No.8 request
Message No.9 request
Message No.10 request
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Write data
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
0: No change,
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
1:Message request
Table 20 Trigger timing data
Triggaer timing argument 1 and 2 have a significant difference according to the contents of Trigger timing.
Data
0
1
2
3
4
5
Trigger timing
None
DI ON
DI OFF
Alarm ON
Alarm OFF
Warning
6
Timer cycle
Argument 1
None
0 to 15 ( DI1 to 16)
0 to 15 ( DI1 to 16)
0 to 71 ( channel 1 to 72 )
0 to 71 ( channel 1 to 72 )
0 to 3
0: All alarm or output
1: All warning or output
2: No battery
3: Memory card full
0 to 6
0: 1 hour
1: 2 hour
2: 3 hour
3: 4 hour
4: 6 hour
5: 12 hour
6: 1 day
Table 21 Receiver’s mail address No.
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Contnets
E-mail address No. 1
E-mail address No. 2
E-mail address No. 3
E-mail address No. 4
E-mail address No. 5
E-mail address No. 6
E-mail address No. 7
E-mail address No. 8
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Data
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
0: No receive; 1: Address to receive
-53-
Argument 2
None
None
None
0 to 3 (Alarm No. 1 to 4)
0 to 3 (Alarm No. 1 to 4)
None
0 to 23
(Base time 0:00 to 23:00)
Table 22 System information
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Contents
Recording status
CF card capacity
Channel alarming status
Reserve
Reserve
LCD state
Reserve
Totalizing condition
Battery condition
Reserve
CF information
Reserve
Reserve
Reserve
Reserve
Reserve
Read data
0: Stop, 1: Recording
0: capacity available, 1: No capacity
0: No, 1: Yes
0: ON, 1: OFF
0: Stop, 1: Totalizing
0: Provided, 1: Not provided
0: None, 1: Exist
Table 23 DO information
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Address 30003
Contents
DO 1 information
DO 2 information
DO 3 information
DO 4 information
DO 5 information
DO 6 information
DO 7 information
DO 8 information
DO 9 information
DO 10 information
DO 11 information
DO 12 information
DO 13 information
DO 14 information
DO 15 information
DO 16 information
Read data
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
Address 30004
Contents
DO 17 information
DO 18 information
DO 19 information
DO 20 information
DO 21 information
DO 22 information
DO 23 information
DO 24 information
DO 25 information
DO 26 information
DO 27 information
DO 28 information
DO 29 information
DO 30 information
DO 31 information
DO 32 information
Table 24 DI information
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Contents
DI 1 information
DI 2 information
DI 3 information
DI 4 information
DI 5 information
DI 6 information
DI 7 information
DI 8 information
DI 9 information
DI 10 information
DI 11 information
DI 12 information
DI 13 information
DI 14 information
DI 15 information
DI 16 information
Read data
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
-54-
Read data
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
Address 30005
Contents
DO 33 information
DO 34 information
DO 35 information
DO 36 information
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Read data
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
0:OFF, 1:ON
Table 25 Channel Alarm information
All data
0:Alarm OFF, 1:Alarm ON
Bit Address 30083
0 Channel 1
Alarm No.1
1
Alarm No.2
2
Alarm No.3
3
Alarm No.4
4 Channel 2
Alarm No.1
5
Alarm No.2
6
Alarm No.3
7
Alarm No.4
8 Channel 3
Alarm No.1
9
Alarm No.2
10
Alarm No.3
11
Alarm No.4
12 Channel 4
Alarm No.1
13
Alarm No.2
14
Alarm No.3
15
Alarm No.4
Address 30084
Channel 5
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 6
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 7
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 8
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30085
Channel 9
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 10
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 11
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 12
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30086
Channel 13 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 14 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 15 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 16 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Bit Address 30087
0 Channel 17
Alarm No.1
1
Alarm No.2
2
Alarm No.3
3
Alarm No.4
4 Channel 18
Alarm No.1
5
Alarm No.2
6
Alarm No.3
7
Alarm No.4
8 Channel 19
Alarm No.1
9
Alarm No.2
10
Alarm No.3
11
Alarm No.4
12 Channel 20
Alarm No.1
13
Alarm No.2
14
Alarm No.3
15
Alarm No.4
Address 30088
Channel 21
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 22
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 23
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 24
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30089
Channel 25
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 26
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 27
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 28
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30090
Channel 29 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 30 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 31 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 32 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Bit Address 30091
0 Channel 33
Alarm No.1
1
Alarm No.2
2
Alarm No.3
3
Alarm No.4
4 Channel 34
Alarm No.1
5
Alarm No.2
6
Alarm No.3
7
Alarm No.4
8 Channel 35
Alarm No.1
9
Alarm No.2
10
Alarm No.3
11
Alarm No.4
12 Channel 36
Alarm No.1
13
Alarm No.2
14
Alarm No.3
15
Alarm No.4
Address 30092
Channel 37
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 38
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 39
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 40
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30093
Channel 41
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 42
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 43
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 44
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30094
Channel 45 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 46 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 47 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 48 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
-55-
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Address 30095
Channel 49
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 50
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 51
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 52
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30096
Channel 53
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 54
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 55
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 56
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Address 30099
Channel 65
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 66
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 67
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 68
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30100
Channel 69
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 70
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 71
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 72
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
-56-
Address 30097
Channel 57
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 58
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 59
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 60
Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Address 30098
Channel 61 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 62 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 63 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
Channel 64 Alarm No.1
Alarm No.2
Alarm No.3
Alarm No.4
10. TROUBLESHOOTING
If the communication is unavailable, check the following items.
Case of Ethernet communication (common to FTP, web, E-mail and MODBUS TCP/IP)
□ Whe ther the power is turned ON again after communication setup change.
□ Whether all devices related to communication are turned ON.
□ Whether connections are correct.
□ Whether the number of connected instruments and connection distance are as specified.
□ Whether conditions for communication are correct.
□ IP address
□ Subnet mask
□ Default gateway
□ Whether the 12th digit of type code of this Recorder is E?
(PHW□□□□□-□□□E□-□)
Case of FTP server function
□ Whether the user name, the password, and the user level are correct?
Case of E-mail send function
□ Whether conditions for communication are correct.
□ SMTP address
□ Sender’s mail address
□ Receiver’s mail address
□ Whether E-mail send conditions are correct.
Case of MODBUS TCP/IP communication function
□ Whether the station No. designated as send destination by the master station coincides with the station No. of
this Recorder been connected.
□ Whether the station No. of this Recorder is set other than 0.
If it is 0, the communication function does not work.
-57-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement