DSC F2-210 210, 211, 212 Motion Detector Installation Instructions

Below you will find brief information for Motion Detector F2-210 210, Motion Detector F2-210 211, Motion Detector F2-210 212. The F2-210 is a Short Range Dual Detector employing both Microwave (MW) and Passive Infrared (PIR) motion sensors. The sensors are combined through a microprocessor to provide "intelligent" motion detection designed to eliminate "single sensor" false alarms. The detector indicates an alarm when both sensors detect motion within 10 seconds of each other. The first sensor, either the PIR or MW, which detects motion will start the 10 second confirmation period during which the other sensor must also detect motion.

PDF Download
Document
DSC F2-210 Series Motion Detector Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Multi-level PIR signal processing
  • Digital Microwave signal processing
  • DRO microwave technology
  • MOV transient/static protection
  • High RF immunity
  • Exceptional white light immunity
  • Microprocessor low voltage protection
  • Optional tamper switch
  • Optional Form 'C' alarm contacts

Frequently asked questions

The F2-210 series of motion detectors utilize both Microwave (MW) and Passive Infrared (PIR) technologies. It triggers an alarm when both sensors detect motion within 10 seconds of each other, providing enhanced security and reducing false alarms.

The F2-210 series motion detector should be mounted in a dry indoor location that allows for perpendicular intruder movement across the beam and provides adequate coverage of the protected area. Avoid mounting near reflective surfaces, metallic surfaces, high air flow, sources of oil or water vapor, direct sunlight, and areas with rapid temperature changes.

After mounting, ensure thorough testing to verify coverage and functionality. Perform a walk test to confirm the desired area of coverage. Additionally, perform a walk test at least once a year to maintain optimal performance.
ALP:
Preparing document for printing…
0%