JS630DF GE Appliances 30" Slide-In Electric Range

JS630DF  GE Appliances 30" Slide-In Electric Range
JS630DF
30"
Min.
30"
Recommended
30"
Min.
6" Min.
Min.
Recommended
From Walls
9-1/16"
Recommended
6" Min.
30"
6" Walls
Min.
From
9-1/16"
NOTE: Use a 4' powercord
Min.
From Walls
9-1/16"
to prevent interference with
Recommended
30"
NOTE:
a 4' drawer.
powercord
the Use
storage
Power
6" Min.
a 4'topowercord
toNOTE:
prevent
interference
with
cordsUse
4-1/2'
6' long
may
From
9-1/16"
30" Walls
to prevent
with
the
storage
drawer.
Power
have to interference
be dressed
to
allow
23-3/16" Min.
30"
If the control panel
thefor
storage
drawer.
cords
4-1/2'
to
6' longPower
may
proper
drawer
closing.
Min.
measures 31-1/8"
a 4' powercord
cordsto4-1/2'
to 6' long
mayNOTE: Use
have
be dressed
to allow
1-1/4" Min. Flat 15" Min.
23-3/16"
If the(79.1
control
cm)panel
like in the
to prevent 23-3/16"
interference with
have
to bedrawer
dressed
to allow
for
proper
closing.
30"
If the
control
panel
measures
31-1/8"
illustration
AND if the
for proper drawer closing. the storage drawer. Power
15"
Min.
1-1/4" Min. Flat
Min.
measures
31-1/8"
(79.1
cm)
like
inhas
thea
countertop
cords 4-1/2' to 6' long may
1-1/4" Min. Flat 15" Min.illustration
(79.1
cm) AND
like inifshave
the
the
raised
edge,
have to be dressed to allow
23-3/16"
illustration
AND
if the
countertop
has
a
raised
edge
to
clear If the control panel
for proper drawer closing.
25"
measures 31-1/8"
countertop
has
a
raised
edge,
shave
theMin.
control
panel,
15" Min. (79.1 cm) like in the
1-1/4"
Flatshave
raised
edge,
raised
edge
to
clear
as
shown
at
left.
2-1/2"
25"
35-7/8"-36-1/2" from
illustration AND if the
raised
edge
to
clear
the
control
panel,
25" Min. from
Floor to countertop
1-1/4"
countertop has a
theshown
control
as
at panel,
left.
2-1/2"
35-7/8"-36-1/2" from
countertop to as
topshown at left.
raised edge, shave
2-1/2"
35-7/8"-36-1/2"
from
Floor
to countertop
1-1/4"
Min. from
of cabinet
drawer
4"
raised edge to clear
25"
Floor to countertop
1-1/4" Min.tofrom
countertop
top
the control panel,
to top
ofcountertop
cabinet drawer
4"
7-1/2"
as shown at left.
2-1/2"
35-7/8"-36-1/2"
of cabinet drawer
4" from
Floor to countertop
1-1/4" Min. from
7-1/2"
countertop to top
7-1/2" 2-1/2"
of cabinet drawer
4"
29-15/16"-30-1/16"
2-1/2"
7-1/2"
2-1/2"
29-15/16"-30-1/16"
29-15/16"-30-1/16"
Acceptable electrical
outlet area
2-1/2"
Acceptable
electrical
29-15/16"-30-1/16"
Acceptable
outlet
area electrical
outlet area
If you are NOT using the
Acceptable electrical
Filler strip or Backguard:
outlet area
If you are NOT using the
Accessory
If youstrip
areor
NOT
using the
Filler
Backguard:
Backguard JXS32
Filler strip or Backguard:
Accessory
Accessory
Backguard
JXS32
If you are NOT using the
Backguard JXS32
30"
4"
23-3/16" Filler strip or Backguard:
24"
31-1/4"
Accessory
30"
4"
23-3/16"
2-7/8"
24"
Backguard
JXS32
30"
31-1/4"
4"
23-3/16"
To Front
24"
31-1/4"
2-7/8"
Surface of
To2-7/8"
Front
Countertop
30"
30"
23-3/16"
To Front
Surface
of
24"
31-1/4"
Surface of
Countertop
30"
2-7/8"
Countertop
30"
To Front
Surface of
Countertop
30"
36-1/4"
If you are using the
20-5/8" Door
36-1/4"
Filler strip or Backguard:
Clearance
36-1/4"
If you are using the
20-5/8"
Door
From
Front
If youstrip
areor
using
the
Filler
Backguard:
KW RATING
20-5/8"
Doorof
Clearance
Surface
Filler strip or Backguard:
Clearance
From
Front
Countertop
36-1/4"
240V 11.9
From Front
Surface
of
20-5/8" Door
25" If you are using the
Surface of
Countertop
Filler strip or Backguard:
Clearance
Countertop
208V 8.9
25"
From Front
25"
Surface of
BREAKER SIZE
Countertop
30"
240V 40 Amps†
25"
25-3/4"*
30"
†
(excluding handle)
208V 40 Amps
30"
25-3/4"*
25-3/4"*
(excluding
handle)
*Total
depth from wall to
†
(excludingfront
handle)
of closed oven door
30"
*Total
depth from
wallisto28-1/2"
including
handle
*Total
to 25-3/4"*
front
of depth
closedfrom
ovenwall
door
(excluding
handle)
front of closed
door
including
handleoven
is 28-1/2"
including handle is 28-1/2"
If the countertop area is not flat, excess tension may be applied to the glass cooktop, causing
*Total depth from wall
breakage and voiding the warranty. MakeAllsure
theare
wall
covering,
front of closed oven do
GE ranges
equipped
with countertop, flooring and
If thecabinets
countertop
areathe
is not
flat,can
excess
tension
may
be
applied
to the
glass cooktop,
Listed by
around
range
withstand
heat
(up
to installation
200°F)
generated
by the causing
range.
including handle is 28
anthe
Anti-Tip
device.
The
If the
countertop
areathe
is not
flat, excess
tension
be
applied
to
the glass
cooktop,and
causing
breakage
and
voiding
warranty.
Make
sure
themay
wallis
covering,
countertop,
flooring
A. Allow
30"
minimum
clearance
between
surface
units
and bottom
of unprotected
wood
or
Underwriters
of this
device
an important,
breakage
and voiding
the can
warranty.
Makethe
sure
the
wall
covering,
countertop,
flooring
and
cabinets
the
withstand
heat
(up
to
200°F)
generated
by
the
range.
metalaround
cabinet,
orrange
allow
a 24"
minimum
when
bottom
of
wood
or
metal
cabinet
is
protected
by
no
required step in the installation
Laboratories
cabinets
around
the range
can withstand
the
heat
(up to
200°F)
A.
Allow
30"
minimum
clearance
between
surface
units
and
bottom
of unprotected
wood
less than
1/4"-thick
flame-retardant
millboard
covered
with
nogenerated
less
than by
No.the
28 range.
MSG or
sheet
of the
range.
If the
countertop
area
is.025"
not
excess
tension
may
applied
to no
the glass cooktop, causing
A. Allow
30"
minimum
clearance
between
surface
units
and
bottom
unprotected
wood or
metal
cabinet,
or thick),
allow a.015"-thick
24"
minimum
when
bottom
of flat,
wood
or metal
cabinet
is be
protected
by
metal
(.015"
stainless
steel,
aluminum
orof.020"
copper.
breakage
and
voiding
the
warranty.
Make
sure
the
wall
covering,
countertop,
flooring and
metal
cabinet,
or allow
a 24"
when
bottom
ofwith
wood
or
metal
cabinet
is
protected
by
no
than
1/4"-thick
flame-retardant
millboard
covered
less
than
No. 28above
MSG
sheet
B.
This
appliance
has
beenminimum
approved
for 0"
spacing
to no
adjacent
surfaces
the
cooktop.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or less
cabinets
around
the
range
can
withstand
the
heat
(up
to
200°F)
generated
by the range.
lessHowever,
than
1/4"-thick
flame-retardant
millboard
covered
with
no
less
than
No.
28
MSG
sheet
metal
(.015"
thick),
.015"-thick
stainless
steel,
.025"
aluminum
or
.020"
copper.
a minimum 6" spacing to surfaces less than 15" above the cooktop and adjacent
Allow
30"
clearance
between
surface
units
bottom of unprotected wood or
GE Appliances product questions, visit our website at geappliances.com B.metal
(.015"
thick),
stainless
steel,
.025"
or
.020"
copper.
This
appliance
has.015"-thick
beenA.approved
forminimum
0"
spacing
toaluminum
adjacent
surfaces
above
theand
cooktop.
cabinetry.
metal
cabinet,
or
allow
agrease
24"
minimum
when
bottom
ofthe
wood
or metal cabinet is protected by no
B. This
appliance
has
approved
forto
0"steam,
spacing
to15"
adjacent
above
cooktop.
However,
a minimum
6"been
spacing
to surfaces
less
than
above
the
cooktop
and
adjacent
is recommended
to
reduce
exposure
splattersurfaces
and
heat.
Allow
1/4"
minimum
or call GE Answer Center® Service, 800.626.2000.
Revised
less than
flame-retardant
millboard
covered
with
no lessSpecification
than No. 28 MSG
sheet 1/16
However,
a minimum
6" spacing
to 1/4"-thick
surfaces less
than 15" above
the cooktop
and
adjacent
cabinetry.
clearance
at the back
wall.
metal
(.015"
thick),
.015"-thick
stainless
steel,
.025"
aluminum
or .020" copper.
iscabinetry.
recommended
reduce
exposure
steam,
grease
splatter
and heat.
Allow 1/4"
minimum
To reduce thetorisk
of burns
or fire to
when
reaching
over
hot surface
elements,
cabinet
storage
This
appliance
hasgrease
been
approved
forspace
0"
spacing
to
adjacent
surfaces
is recommended
to reduce
toavoided.
steam,
splatter
and
heat.
Allow
1/4"
minimum
clearance
the back
wall. B.exposure
space at
above
the
cooktop
should
be
If cabinet
storage
is to be
provided
above above the cooktop.
However,
a minimum
6"
spacing
tohood
surfaces
than
above
the cooktop and adjacent
clearance
at the
back
wall.
To
reduce
the
riskthe
of risk
burns
orbe
firereduced
when
reaching
over
surface
elements,
cabinet
storage
the cooktop,
can
by installing
ahot
range
that less
projects
at15"
least
5" beyond
cabinetry.
To
reduce
the
risk
of
burns
or
fire
when
reaching
over
hot
surface
elements,
cabinet
storage
space
the
cooktop
should be avoided. If cabinet storage space is to be provided above
theabove
front of
the
cabinets.
isreduced
recommended
to Ifreduce
exposure
to
steam,
splatter
and heat. Allow 1/4" minimum
space
abovethe
therisk
cooktop
be by
avoided.
cabinet
storage
space
is togrease
be
above
the
cooktop,
can beshould
installing
a range
hood that
projects
at provided
least
5" beyond
GE Appliances 30" Slide-In Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RECEPTACLE LOCATIONS: Locally approved flexible service cord or
conduit must be used because terminals are not accessible after range
installation. See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly against
rear wall.
NOTE: This appliance has been approved for 0" spacing to adjacent
surfaces above the cooktop. However, a 6" minimum spacing to surfaces
less than 15" above the cooktop and adjacent cabinet is recommended to
reduce exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing, consult installation
instructions for current dimensional data and additional requirements
OPTIONAL KITS FOR SLIDE-IN ELECTRIC RANGES
WB07T10680 - Black Filler Strip Assembly
ACCESSORY BACKGUARDS
(Attaches to the back of range as a backguard when unit is
installed in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32BB (Black) - 4" High BODY SIDES
(Slide-in ranges are sold
without sides installed. Can
be installed on either left
or right when unit has one
exposed side [no cabinet
adjacent]. Kit contains
1 body side) JXS77BB (Black)
NOTE: Check local codes
for required breaker size.
JS630DF
GE Appliances 30" Slide-In Electric Range
FEATURES AND BENEFITS
6"/9" Power Boil element - Produces rapid, powerful heat
Self-clean oven - Cleans the oven cavity without the need for scrubbing
Ceramic glass cooktop - Smooth cooktop easily wipes clean
Removable full-width storage drawer - Store cookware or kitchen accessories
Black gloss oven interior - Enjoy a clean and sleek appearance
Dual element bake - Upper and lower elements produce even heat
and great results
Model JS630DFWW - White on white
Model JS630DFCC - Bisque on bisque
Model JS630DFBB - Black on black
JS630DF
Specification Revised 1/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising