- No category
advertisement
AH-108
AH-108, AH-16TN, AH-32TN
For Intercom, Paging, and Paging / Talkback Systems
Features:
• 8Ω, 10W horn with built-in non-polarized capacitor
• All metal weather proof construction for indoor or outdoor use
• Universal swivel mount base
• Beige baked enamel finish
• Can be used with the LEF system.
Specifications:
Power Handling:
Impedance:
Frequency Response:
10 Watts
8Ω
300-10,000 Hz
120° Dispersion Angle:
Sound Pressure Level:
Dimensions:
110dB at rated output measured on 4’ axis
Sensitivity as a microphone: -26dBM (Re: 10 dynes/cm
6-⅛” Bell x 6-½” Deep
2 )
AH-16TN
Features:
• Built-in 70V transformer, providing 1, 2, 4, 8,
& 16 Watt taps, + 8Ω direct
• High intelligibility, used for paging into large or high noise areas
• All metal weather proof construction for indoor or outdoor use
• Screwdriver selectable wattage taps
• Universal swivel mount base
• Beige baked enamel finish
• Use with 70V paging systems.
Specifications:
Power Handling:
Impedance:
Wattage Taps:
Frequency Response:
Dispersion Angle:
Sound Pressure Level:
Dimensions:
16 Watts (Continuous)
8Ω Direct or 25/70.7V transformer
25V: 0.5/1/2/4/8
70.7V: 1/2/4/8/16
350-15,000 Hz
130°
119dB at rated output measured on 4’ axis
Sensitivity as a microphone: -28dBM (Re: 10 dynes/cm
8-⅛” Bell x 9” Deep
2 )
Wattage tap dial position:
1 = 1 Watt @ 70V
2 = 2 Watts @ 70V
3 = 4 Watts @ 70V or 0.5 Watt @ 25V
4 = 8 Watts @ 70V or 1 Watt @ 25V
5 = 16 Watts @ 70V or 2 Watts @ 25V
6 = 4 Watts @ 25V
7 = 8Ω
AH-32TN
Features:
• Built-in 70V transformer, providing
2, 4, 8,16, & 32 Watt taps
• High intelligibility, used for paging into large or high noise areas
• All metal weather proof construction for indoor or outdoor use
• Screwdriver selectable wattage taps
• Universal swivel mount base
• Beige baked enamel finish
• Use with 70V paging systems.
Specifications:
Power Handling:
Impedance:
Wattage Taps:
Frequency Response:
Dispersion Angle:
Sound Pressure Level:
Sensitivity as a microphone: -28dBM (Re: 10 dynes/cm
Dimensions:
32 Watts (Continuous)
25/70.7V transformer
25V: 1/2/4/8/16
70.7V: 2/4/8/16/32
325-15,000 Hz
130°
124dB at rated output measured on 4’ axis
8-⅛” Bell x 9” Deep
2 )
Wattage tap dial position:
1 = 2 Watts @ 70V
2 = 4 Watts @ 70V
3 = 8 Watts @ 70V or 1 Watt @ 25V
4 = 16 Watts @ 70V or 2 Watts @ 25V
5 = 32 Watts @ 70V or 4 Watts @ 25V
6 = 8 Watts @ 25V
7 = 16 Watts @ 25V
Aiphone Corporation | www.aiphone.com/home
|
[email protected] | P: 800.692.0200
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project