Safety Made Simple ® Testers For Electrical Safety Compliance Hipot

Safety Made Simple ® Testers For Electrical Safety Compliance Hipot
Safety Made Simple®
Testers For Electrical Safety Compliance
Hipot • Insulation Resistance • Ground Bond • Leakage Current • Multi-Function Electrical Safety
PRODUCT SELECTION GUIDE
PROVEN RELIABILITY
Every SCI tester is backed by a standard 1-year warranty. Extend your warranty for up to 3 years
when you return your tester for annual calibration and inspection. We also offer 2-year and 3-year
buyer protection plans which you can purchase upfront without a calibration requirement.
ONGOING SUPPORT
With over 60 years of industry experience, SCI has developed the best support team in the industry.
Our technical library includes resources to help you learn more about your SCI tester, NRTL standards,
and safety compliance.
GOING
ON
UP
S
We’ve been keeping our customers happy for more than 60 years by focusing on the little things.
During that time we’ve learned a lot about what it takes to stay current, relevant and ahead of the
competition. Our products are packed with only the features you need, and none that you don’t.
Explore the most intuitive testers on the market.
POR
T
1-DAY SHIPMENT GUARANTEE*
We understand that you need to receive your tester in a timely fashion in order to prevent downtime
on the production line. We ship every order within 1 business day using standard ground shipping.
*On all standard products. If your product ships late, we pay the freight.
CUSTOMER EXPERIENCE GUARANTEE
We are so confident our testers will meet your needs that we provide a 100% customer experience
guarantee. If for any reason you are dissatisfied with your SCI tester, return it for a full refund or
exchange within 45 days of the original purchase date, no questions asked.
All testers come with all of the accessories you need to run a test right out of the box.
AMPS
AC Hipot
DC Hipot
Insulation
Resistance
Ground
Continuity
Ground
Bond
50Hz 60Hz
Leakage
Current
Functional
Run
Frequency
Selection
Ramp
Dwell
Low Current
Sense
Safety Agency
Listed
PLC Remote
USB
RS-232
290 SERIES
290 SERIES
294
••
295••
296•• •
297•• ••
298
500VA •
260 SERIES
264
266
4000 SERIES
4320 4520
6330
6000 SERIES
2200 SERIES
•• •30A
500VA•
• 30A
•• •30A• •
2205
2
60A
40A
Safety Made Simple®
•
•
• • • • • • • •
• •
•
•
•
•
•• • •• • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
294
295
296
297
298
260 SERIES
OPT
OPT
264
266
4000 SERIES
•
•
•
•
•
•
•
•
• • • • OPT
4520
•
•
•
•
• • •
6330
• 2205
OPT
4320
6000 SERIES
2200 SERIES
hipot.com
OPT
OPT
OPT
OPT
OPT
Toll Free +1-800-504-0055
Phone +1-847-932-3662
3
290 SERIES
EN 61010-1
EN 61010-31
HIPOT
TESTERS
290 SERIES SPECS FOUND ON PAGE 19
RELEVANT APPLICATIONS
SERIES FEATURES
APPLIANCE
CABLES & COMPONENTS
50Hz 60Hz
LIGHTING & LED TESTING
See how
simple using
our tester
can be!
MODULAR HOMES
Test Setup
Memories
Frequency
Selection
Ramp
Dwell
Low Current
Sense
Safety Agency
Listed
MOTORS & PUMPS
POWER TOOLS
5 PROGRAMMABLE
MEMORIES W/ 10 OPTIONAL
AUTOMATE WITH PLC
CONTROL OR OPTIONAL
USB INTERFACE
ADVANCED SECURITY
SETTINGS
SUPPLIED ACCESSORIES
The 290 Series is our most popular line of Hipot
testers. These testers are designed to simplify every
aspect of safety testing for operators of all comfort
levels. Our 290 Series includes the most intuitive
user interface in the industry and won’t take up too
much space on the production line. With multiple
memories and an optional USB interface, you can
quickly perform tests on a variety of DUT’s from the
front panel or with a PC. Choose from 5 different
models to satisfy your testing requirements.
102-069-904
Return Lead 6 ft. (1.8m)
102-055-913
High Voltage Lead 6 ft. (1.8m)
125-013-001
Input Power Cable USA
99-10040-01
Interlock Connector
OPTIONS
Description
Rear Outputs
USB Port
10 Memory
Dual Palm Remote
Capability
TAMPER-PROOF FRONT
PANEL CONTROLS
3mA Current Limit
Pulse Mode
Push to Test Mode
REDUNDANT HARDWARE
SAFETY INTERLOCK
PORTABLE, RUGGED DESIGN
AC Hipot
DC Hipot
Insulation
Resistance
296
297
298*
•
••••
• ••••
• ••••
• ••••
• •••
•
•
PLC Remote
USB
(optional)
Ground
Continuity
• •
••
•• •
••• •
500VA •
294
295
294 295296297298
On the Go
Portability
Intuitive User
Interface
Available mid 2016
*
4
Safety Made Simple®
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
5
260 SERIES
EN 61010-1
EN 61010-31
GROUND BOND
TESTERS
260 SERIES SPECS FOUND ON PAGE 20
RELEVANT APPLICATIONS
SERIES FEATURES
APPLIANCE
INDUSTRIAL EQUIPMENT
50Hz 60Hz
MEDICAL
See how
simple using
our tester
can be!
LABORATORY EQUIPMENT
Test Setup
Memories
Frequency
Selection
Dwell
Safety Agency
Listed
WATER PUMPS
264 SUPPLIED ACCESSORIES
5 PROGRAMMABLE
MEMORIES
AUTOMATE WITH PLC
CONTROL OR OPTIONAL
USB INTERFACE
ADVANCED SECURITY
SETTINGS
Our 260 Series makes Ground Bond testing
simple. We offer two models so that you can have
a simple and easy-to-use Ground Bond tester that
provides the output current you need to satisfy
NRTL specifications. With an intuitive interface that
allows you to set-up a test in seconds and practical
security settings, our 260 Series can easily be
deployed in both laboratory and production
line environments.
99-10725-01
40 Amp High Current Lead 6 ft. (1.8m)
99-10724-01
40 Amp High Current Return Lead 6 ft. (1.8m)
125-013-001
Input Power Cable USA
99-10103-01Fuse
266 SUPPLIED ACCESSORIES
99-10239-01
60 Amp High Current Lead 6 ft. (1.8m)
99-10238-01
60 Amp High Current Return Lead 6 ft. (1.8m)
99-10164-01
Input Power Cable USA
99-10210-01Fuse
Description
Rear Outputs
USB Port
REDUNDANT HARDWARE
SAFETY INTERLOCK
6
Safety Made Simple®
USB
(optional)
OPTIONS
MILLIOHM OFFSET
FUNCTION FOR ACCURATE
GROUND BOND TESTING
PORTABLE, RUGGED
DESIGN
PLC Remote
264
266
40A
60A
Ground
Bond
Ground
Bond
Display Voltage Drop
264266
•
•
••
••
On the Go
Portability
Intuitive User
Interface
MODEL 266
•
•
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
7
EN 61010-1
EN 61010-31
Model 4320
4000 SERIES
4-IN-1 ELECTRICAL
SAFETY TESTERS
4000 SERIES SPECS FOUND ON PAGE 21
RELEVANT APPLICATIONS
SERIES FEATURES
APPLIANCE
INDUSTRIAL EQUIPMENT
50Hz 60Hz
INFORMATION TECHNOLOGY
See how
simple using
our tester
can be!
CONTRACT MANUFACTURING
Test Setup
Memories
Frequency
Selection
Ramp
Dwell
Low Current
Sense
Safety Agency
Listed
PLC Remote
RS-232
SUPPLIED ACCESSORIES
102-050-913 High Voltage Retractable Probe 6 ft. (1.8m)
VERSATILE 4-IN-1
FUNCTIONALITY
SIMPLE MENU NAVIGATION
MEETS 200 mA SHORT
CIRCUIT REQUIREMENTS*
4520 ONLY
*
6 PROGRAMMABLE
MEMORIES WITH 6 TEST
STEPS EACH
102-055-913 High Voltage Lead 6 ft. (1.8m)
The 4000 Series provides advanced 4-in-1 test
capability in a convenient one-box solution. Our
most popular multi-function tester, the 4000 Series
performs AC Hipot, DC Hipot, Insulation Resistance
and Ground Bond tests while taking up minimal
production line space. The 4000 Series includes the
simplest menu navigation in the industry, reducing
set-up time and increasing production line throughput
for any application. With multiple memories and an
optional RS-232 interface, you can quickly perform
tests on a variety of DUT’s from the front panel or
with a PLC remote. Choose from two models.
125-013-001 Input Power Cable USA
99-10164-01 Input Power Cable USA
99-10008-01 30 Amp High Current Lead 6 ft. (1.8m)
99-10009-01 30 Amp High Current Return Lead 6 ft. (1.8m)
99-10040-01 Interlock Connector
99-10106-01 Fuse 4320
99-10656-01 Fuse 4520
OPTIONS
Description
Rear Outputs
RS-232 Interface
AUTOMATE WITH PLC
CONTROL OR OPTIONAL
RS-232 INTERFACE
43204520
•
•
••
(optional)
MODEL 4520
30A
REMOTE SAFETY
INTERLOCK
AC Hipot
4320
4520
8
Safety Made Simple®
•
DC Hipot
Insulation
Resistance
Ground
Bond
•••
•••
500VA
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
9
6000 SERIES
EN 61010-1
EN 61010-31
6-IN-1 ELECTRICAL
SAFETY TESTERS
6000 SERIES SPECS FOUND ON PAGE 22
RELEVANT APPLICATIONS
SERIES FEATURES
APPLIANCE
INFORMATION TECHNOLOGY
50Hz 60Hz
MEDICAL
See how
simple using
our tester
can be!
SUPPLIED ACCESSORIES
Test Setup
Memories
Frequency
Selection
Ramp
Dwell
Low Current
Sense
Safety Agency
Listed
PLC Remote
RS-232
102-055-913 High Voltage Lead 6 ft. (1.8m)
102-013-001 Input Power Cable USA
VERSATILE 6-IN-1
FUNCTIONALITY
20 PROGRAMMABLE
MEMORIES WITH 10 TEST
STEPS EACH
4 BUILT-IN
NRTL-COMPLIANT
MEASURING DEVICES
AUTOMATE WITH PLC
CONTROL OR VIA RS-232
INTERFACE
99-10457-01 40 Amp High Current Return Lead 10 ft. (3m)
The 6330 is our most advanced multi-function
electrical safety tester with 6-in-1 test capability.
Our flagship model is designed to make advanced
testing applications simple with the most feature rich
menu system on the market. With minimal set-up
time, you can perform AC Hipot, DC Hipot, Insulation
Resistance, Ground Bond, Leakage Current and
Functional Run tests on a variety of DUT’s.
The 6330 maximizes production line throughput far
beyond a single function tester, while taking up less
space. Use the 6330 from the front panel or automate
your testing via the RS-232 interface.
99-10468-01 40 Amp High Current Lead 10 ft. (3m)
99-10009-01 30 Amp High Current Return Lead 6 ft. (1.8m)
99-10008-01 30 Amp High Current Lead 6 ft. (1.8m)
99-10469-01 Black DUT Input Line Test Lead
99-10470-01 Black DUT Input Neutral Test Lead
99-10471-01 White DUT Output Line Test Lead
99-10472-01 White DUT Output Neutral Test Lead
99-10040-01 Interlock Connector
99-10467-01 Adapter Box Universal US 10 ft. (3m)
99-10106-01Fuse
OPTIONS
Description6330
REMOTE SAFETY
INTERLOCK
Rack Mount Hardware
30A
AC Hipot
6330
10
Safety Made Simple®
•
•
DC Hipot
Insulation
Resistance
Ground
Bond
Leakage
Current
Functional
Run
•••••
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
11
2200 SERIES
INSULATION RESISTANCE
TESTERS
2200 SERIES SPECS FOUND ON PAGE 23
RELEVANT APPLICATIONS
SERIES FEATURES
AEROSPACE
CABLE AND HARNESS
MOTORS
See how
simple using
our tester
can be!
SWITCHES AND CONTROLS
Dwell
PLC Remote
SUPPLIED ACCESSORIES
PORTABLE DESIGN
SIMPLE MENU SYSTEM
AUTOMATE WITH PLC
CONTROL
REMOTE SAFETY
INTERLOCK
The 2205 is our stand-alone Insulation Resistance
tester designed for use on the production line or
in the field. With measurements up to 200 GΩ at
voltages up to 1000 VDC, the 2205 can satisfy even
the most demanding application requirements.
We’ve incorporated the simplest menu system in
the industry and a portable design for safe and
easy testing.
102-045-901
Return Clip w/ Black BNC Plug 6 ft. (1.8m)
102-055-913
High Voltage Lead 6 ft.
125-013-001
Input Power Cable USA
99-10040-01
Interlock Connector
On the Go
Portability
99-10258-01Fuse
Insulation
Resistance
2205
12
Safety Made Simple®
•
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
13
SAFE WORKSTATION ACCESSORIES
E
A
F
10’
B
J
E-ST
OP
H
G
SAFE WORKSTATION PACKAGES
I
C
Our Safety Packages are an ideal all-in-one solution to protect your operators on the production line. Each package
contains the necessary accessories to guard operators from electrical shock, warn unqualified operators of a dangerous
testing area and automatically initiate electrical safety tests for a "hands-off" solution to your testing needs.
10’
D
Setting up a Safe Workstation
One of the best ways to prevent injury is to ensure that your test station is set up
safely and securely. Test stations can be setup with or without direct protection
depending on your requirements. Direct protection means that the operator
cannot physically come into contact with an energized DUT while a test is running.
Scan to
View Our
Full Electrical
Safety Guide
A
E
H
DUT Safety Enclosure
Signal Tower Light
This is wired to the Hipot tester’s Remote
Safety Interlock. This protects you from
touching the DUT while a test is in progress.
If the enclosure door is opened, the tester’s
high voltage is immediately disabled.
Gives an indication as to the status of
the testing area. A green light indicates
the Hipot tester is not outputting high
voltage and the test area is safe. A red light
indicates that the Hipot tester is active and
to stay clear of the test area.
Non-Conductive
Work Bench
B
Hipot Tester
Tester used to test the DUT.
Emergency Stop Button
C
Located on the perimeter of the test area.
In the event of an emergency, someone
outside the test area can hit the E-Stop
button to immediately cut off power to the
entire test station.
Test Operator
D
High Voltage Insulation Mat
This isolates you from ground which
provides an additional means of protection
when operating high voltage equipment.
14
F
Safety Made Simple®
G
Warning Sign
Mark the testing area with a clearly posted
sign that reads: DANGER - HIGH VOLTAGE
TEST AREA. AUTHORIZED PERSONNEL
ONLY.
SELECT PACKAGE
PLUS PACKAGE
PREMIUM PACKAGE
99-10708-01
99-10709-01
99-10710-01
This Package Includes Dual Palm
Remote Switch, High Voltage
Warning Sign and Insulation Mat.
This Package Includes Remote Test
Box, Signal Tower Light and
Insulation Mat.
This Package Includes DUT
Enclosure, Warning Sign
and Insulation Mat.
Compatible Models: 290 Series,
Requires Activation of Dual Remote
Switch Enable Option
Compatible Models: 290 Series,
260 Series
Compatible Models: All Testers
DUT ENCLOSURE
Our DUT Enclosures are designed to protect the operator from electric shock
during testing. Interface the enclosure with our Remote Safety Interlock feature
to automatically disable the tester's output when the enclosure door is opened.
A
WOOD BASE DUT ENCLOSURE WITH PLEXIGLASS DOOR
99-10715-01
Only use a work bench made of nonconductive material such as plastic or
wood. This ensures no stray leakage current
could flow through you during a test.
I
Dual Palm Remote Switches
Two hand operation switches force the
operator to place a hand on each switch
and hold them throughout the test.
The palm switches should be placed at
least 21.6" (550mm) apart to prevent the
operator from one hand activation of both
switches.
J
NEC (National Electric
Code) & NFPA (National Fire
Protection Agency
Stipulate that any unqualified workers
shall not come within 10' of an EXPOSED
energized circuit.
hipot.com
Outside dimensions: (W x D x H) 24" x 19" x 11.5",
610 mm x 483 mm x 293 mm
Inside dimensions: (W x D x H) 20" x 16" x 10",
508 mm x 407 mm x 254 mm
3/4" Walls, 3/4" Flame Retardant Foam, 1/4" Plexiglass cover
Compatible Models: All Testers
G
D
INSULATION MAT
E
SIGNAL TOWER LIGHT
99-10691-01
99-10705-01, 99-10706-01
This 20 kV electrical insulation
mat is an ideal means for adding
a level of operator safety. This
mat is formulated to provide
electrical insulation for the operator.
Insulated matting prevents the
operator from being grounded
thereby preventing electrical shock.
Gives an indication as to the status of
the testing area. A green light indicates
the Hipot tester is not outputting high
voltage and the test area is safe. A red
light indicates that the Hipot tester is
active and to stay clear of the test area.
99-10705-01 (with I/O) Compatible Models:
290 Series
HIGH VOLTAGE
WARNING SIGN
99-10690-01
This "DANGER: HIGH VOLTAGE"
sign is ideal for warning
unauthorized operators to
stay away from the test area.
This sign should be clearly
visible and mounted outside
of the electrical testing area.
99-10706-01 Compatible Models:
260 Series, 4000 Series, 6000 Series
Toll Free +1-800-504-0055
Phone +1-847-932-3662
15
ACCESSORIES
DUAL PALM REMOTE SWITCHES
DPR-01
Using two-hand operation switches ensures operator safety
because it forces you to place a hand on each switch and
hold throughout the test. This prevents you from accidentally
touching a DUT while the test in running. The palm switches
should be placed at least 21.6" (550mm) apart to prevent
one-hand activation of both switches.
TEST VERIFICATION BOX
Our test verification box solutions are a go / no-go daily test
verification designed to ensure that the failure detectors
of an SCI electrical safety tester are functioning properly.
These boxes were designed to verify AC and DC Hipot
test functionality (the TVB-2 also has Ground Bond test
functionality), making it the ideal solution for manufacturers
who are required to conduct daily verifications on their
test equipment.
TVB-1 Compatible Models: All Hipot Testers
Compatible Models: 290 Series (requires activation of dual remote
switch enable option)
*Also a Safe Workstation accessory
RETURN RETRACTABLE PROBE 10 FT. (3m)
102-064-904
TVB-2 Compatible Models: All Testers
Compatible Models: 290 Series
ADAPTER BOX
We have several adapter box configurations available to meet the broad
needs of our customers. An adapter box allows for safe and easy testing of line
cord-terminated products. Simply connect the adapter box to the tester and
then plug the DUT into the adapter box. Adapter boxes are available for most
test instruments in multiple country configurations.
Adapter Box Description
Used With
99-10001-01
290 Series
Universal Receptacle Box High Voltage
99-10005-01 Universal Receptacle Box High Current
264, 4000 Series
99-10467-01
6000 Series
Universal Receptacle Box HC/HV/LLT
DUAL ACTION TRIGGER
TEST PROBE 10 FT. (3m)
99-10473-01
This high voltage test gun has a dual action test trigger that controls the
retractable probe tip and activates the high voltage output of the tester.
The unique ergonomic shape makes this probe easy and comfortable to use.
Compatible Models: 4000 Series
40 AMP HIGH CURRENT PROBE
W/ LUG 10 FT. (3m)
REMOTE TEST BOX
The RTB is a Remote Test and Reset Control Box. It comes in two different
configurations: RTB-01 and RTB-02. Both models utilize the connection of Remote
Input/Output on the back of all compatible SCI testers. Both RTB-01 and RTB-02
can be used to initiate and reset a test. The RTB-02 has an additional feature (LED’s)
which allow the operator to monitor the PASS, FAIL and PROCESSING signals.
99-10661-01
RTB-01 Compatible Models: 2
90 Series, 260 Series
This fixed tip probe allows for easy contact with the grounding
points of the DUT. The probe has two separate test buttons
making it comfortable to use in various positions. The test
switch can be used to activate high current after making good
contact with the test point.
RTB-01 Compatible Models: 2
60 Series, 4000 Series, 6000 Series
Compatible Models: 264, 4000 Series, 6000 Series
*Also a Safe Workstation accessory
16
Safety Made Simple®
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
17
PRODUCT SPECIFICATIONS
INDEX
290 SERIES SPECIFICATIONS
ICONOLOGY
AC Hipot
DC Hipot
The AC Hipot test
is used to stress
the insulation of
a DUT with AC
high voltage.
The DC Hipot test
is used to stress
the insulation of a
DUT with DC high
voltage.
The Functional Run
test ensures your DUT
is operating properly
before shipment.
Connect your tester
to a PC for automated
applications with
optional USB control.
USB
Functional
Run
INPUT (294, 295, 296, 297, 298)
INSULATION RESISTANCE TEST MODE (297 only)
Voltage
100-120 VAC / 200-240 VAC ± 10% Auto Range
Output Voltage
Frequency
50/60 Hz ± 5%
Range:
Resolution:
Accuracy:
0.1-1.00 kVDC
0.01 kV
± (1.5% of setting + 3 V)
Fuse
3.15 A / 250 VAC Fast-Blow
Resistance Display
Range:
Resolution:
Accuracy:
1 - 1000 MΩ
1 MΩ
100-499 V ± (7% of setting + 2 MΩ)
500-1000 V ± (3% of setting + 2
MΩ)
DIELECTRIC WITHSTAND TEST MODE
Output Rating
Output up to 100 mA
of current during an AC
Hipot test.
Connect your tester
to a PC for automated
applications with
optional RS-232 control.
RS-232
500 VA
Voltage Setting
AMPS
Ground
Bond
Ground
Continuity
Insulation
Resistance
Leakage
Current
18
The Ground Bond
test is used to verify
the integrity of a
DUT’s earth ground
conductor.
The Ground
Continuity test is used
to verify the presence
of the DUT’s earth
ground conductor.
The Insulation
Resistance test is used
to determine the total
resistance of a DUT’s
insulation.
The Leakage Current
test is used to determine
the amount of current
that flows through the
insulation of a DUT during
operation.
Test Setup
Memories
50Hz 60Hz
Quickly setup, edit
and recall test settings
for different types of
DUT’s with multiple
user-defined memory
locations.
Get your products
ready for the global
market by testing at 50
or 60 Hz.
Dwell
Denotes a tester
designed for optimal
portability. Perfect for
use in the field.
On the Go
Portability
Frequency
Selection
Ramp
PLC Remote
Maximize operator
safety by connecting
an enclosure, warning
lights, or safety
probes to your tester.
Prevents false failures
by slowly ramping up
the output voltage
over time – perfect
for sensitive or highly
capacitive DUT’s.
Eliminates the need to
make adjustments during
testing by consistently
applying the correct
voltage for the correct
amount of time.
Prevents false Hipot
passes with confidence
by ensuring your test
leads are connected
Low Current correctly.
Sense
This tester is NRTL
listed and was
subjected to the
same rigorous tests
Safety Agency it must perform.
Listed
Output Frequency
298
AC 0-5.00 kVAC, 99.99 mA
297
AC 0-5.00 kVAC, 12.00 mA
DC 0-6.00 kVDC, 5.00 mA
Hi-Limit
Range:
Resolution:
0, 1 - 1000 MΩ (0=off)
1 MΩ
296
AC 0-5.00 kVAC, 12.00 mA
DC 0-6.00 kVDC, 5.00 mA
Lo-Limit
Range:
Resolution:
1 - 1000 MΩ
1 MΩ
295
AC 0-5.00 kVAC, 12.00 mA
Timer
294
DC 0-6.00 kVDC, 12.00 mA
Range:
Delay:
0.2 or 1.0 sec
0, 0.5 - 999.99 sec, (0=continuous)
298
297
296
295
0-5.00 kVAC
Resolution: 0.01 kV
Accuracy: ± (1.5% of setting + 5V)
297
296
294
0-6.00 kVDC
Resolution: 0.01 kV
Accuracy: ± (1.5% of setting + 5V)
294
DC only
295, 298
50/60 Hz Selectable
296, 297
DC and 50/60 Hz Selectable
Accuracy
± 0.1%
AC Waveform
Sine Wave, Crest Factor = 1.3 - 1.5
DC Output Ripple
294
296
297
Dwell Timer
0, 0.2 - 60 sec, (0=continuous), 0.1 sec/step
Ramp Timer
0.2 - 180 sec, 0.1 sec/step
Leakage Failure
Settings
298
AC Hi-Limit: 0.10 - 99.99 mA
Lo-Limit: 0 - 99.99 mA
Resolution:
Accuracy:
0.01 mA
± (2% of reading + 0.06 mA)
297
296
AC Hi-Limit: 0.10 - 12.00 mA
Lo-Limit: 0 - 12.00 mA
<5% ( 6 kVDC / 5mA at Resistive
Load)
GENERAL SPECIFICATIONS
Continuity Feature
Range:
Resolution:
Accuracy:
Memories
5 (10 optional)
Remote I/O
Input:
Output:
Discharge Time
AC Hi-Limit: 0.10 - 12.00 mA
Lo-Limit: 0 - 12.00 mA
294
DC Hi-Limit: 0.02 - 5.0 mA
Lo-Limit: 0 - 5.00 mA
Resolution:
Accuracy:
0.01 mA
± (2% of reading + 0.02 mA)
< 50 msec for no load, < 100 msec for capacitive load
Test, Reset, Interlock
-Pass, Fail, Test-in-Process
Hardware Interlock - a relay on
the high voltage output opens
when the Interlock signal is
disabled.
3mA AC/DC
Current Limit
(optional)
294
295
296
297
Meter Max
(standard)
Displays the maximum voltage value recorded
during a breakdown.
Imax
(optional)
Displays the maximum leakage current value read
during a test. Option 3 (USB port) must be installed
to receive this measurement.
Security
Option to turn On or Off, when On you can switch
between two security levels:
Range: 0.00 - 3.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting +
0.02mA)
1. Run - Operator can only run a test. No ability to
change memory locations or edit test parameters.
2. Mem - Operator can run a test and change
memory locations. No ability to edit test
parameters.
DC Hi-Limit: 0.02 - 5.00 mA
Lo-Limit: 0 - 5.00 mA
295
1 - 1.50 Ω
0.01 Ω
± (2% of setting + 0.02 Ω)
Safety Mark
CE/cTUVus
Dimensions
294, 295
296, 297
8.5" x 3.5" x 11.9" (215 x 88.1 x 300
mm)
298
16.93" x 5.20" x 11.84" (430 x 132 x
300 mm)
294, 295
296, 297
12 lbs (5.46 Kg)
298
56 lbs (25.4 Kg)
(W x H x D)
Weight
Specifications subject to change without notice.
Safety Made Simple®
hipot.com
Toll Free +1-800-504-0055
Phone +1-847-932-3662
19
INDEX
INDEX
260 SERIES SPECIFICATIONS
INPUT
4000 SERIES SPECIFICATIONS
INPUT
GENERAL SPECIFICATIONS
Voltage
264
100 - 120 VAC / 200 - 240 VAC ± 10%
Auto Range
266
100 - 240 VAC ± 10% Full Range
Frequency
50/60 Hz ± 5%
Fuse
264
15A / 250 VAC Slow-Blow
GROUND BOND TEST MODE
Output Rating
5
Remote I/O
Input:
Test, Reset, Interlock
Output:
Pass, Fail, Test-in-Process
Hardware Interlock - a relay on the high voltage output
opens when the Interlock signal is disabled.
10A / 250 VAC Slow-Blow
266
Voltage Drop
Display (optional)
Voltage Limit Settings
Voltage 12 VAC (fixed)
Output Frequency
50/60 Hz user selectable
Accuracy: ± 0.1%
Resistance Limit
Settings
264
266
0 - 150 mΩ for 30.1 - 40.0 A
0 - 200 mΩ for 10.1 - 30.0 A
0 - 600 mΩ for 3.0 - 10.0 A
Resolution: 1 mΩ
Accuracy: ± (2% of setting + 2 mΩ)
0 - 100 mΩ
Resolution: 1 mΩ
Accuracy: ± (2% of setting + 2 mΩ)
Dwell Timer
0, 0.5 - 240.0 sec, (0=continuous), 0.1 sec/step
Ramp Timer
0.1 sec fixed
Measurement
Current
264
0.0 - 40.0 AAC
266
0.0 - 60.0 AAC
264
0.00 - 4.00 VAC
266
0.00 - 6.00 VAC
Safety Mark
Dimensions
(W x H x D)
Weight
264
4320
5 kV @ 20 mAAC
6 kV @ 5 mADC
4520
5 kV @ 100 mAAC
6 kV @ 10 mADC
Range:
0 - 5.00 kVAC
0 - 6.00 kVDC
0.01 kV
± (2% of setting + 5 V)
± (2% of reading + 10 V)
Resolution:
Accuracy:
4320
4520
HI-Limit
LO-Limit
4320 AC
2. Mem - Operator can run a test and change
memory locations. No ability to edit test
parameters.
4320 DC
CE/cTUVus
4520 AC
264
8.5" x 3.5" x 11.81" (215 x 88 x 300 mm)
4520 DC
Range:
Resolution:
Accuracy:
0 - 1000 V
1V
± (2% of reading + 5 V)
Resistance Display
Range:
1 - 1000 MΩ (4 digit, auto ranging)
Resolution:
1000 VDC
MΩ
MΩ
0.01
1.00 - 40.00
1.00 - 80.00
0.1
35.0 - 999.9
75.0 - 999.9
Hi-Limit
Range:
0, 1 - 1000 MΩ (0 = off)
LO-Limit
Range:
0, 0.5 - 999.9 sec, (0 = continuous)
Delay Timer
Resolution:
Accuracy:
0.1 sec
± (0.1% of 0.05 sec)
6 VAC fixed
Range: 0 - 99.99 mAAC, 0 - 10.00 mADC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
Range:
50/60 Hz, user selectable
Output Current
Range:
Resolution:
Accuracy:
3.0 - 30.0 AAC
0.1 A
± (2% of setting + 0.02 A)
Current Display
Range:
Resolution:
Accuracy:
0 - 30.0 A
0.1 A
± (3% of reading + 0.01 A)
HI-Limit
LO-Limit
Range:
0 - 510 mΩ for 3.0 - 10.0 A
Range: 0 - 20.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting + 0.02 mA)
Range: 0 - 5.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting + 0.02 mA)
Range: 0 - 99.99 mAAC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
Range: 0 - 10.00 mADC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.06 mA)
Audible and Visual
266
20.25 lbs. (9.2 Kg)
DC Output Ripple
4320
< 5% Ripple RMS at 6 kVDC @ 5 mA,
resistive load
4520
≤ 5% Ripple RMS at 6 KVDC @ 10 mA,
resistive load
Discharge Time
≤ 200 ms
Max. Capacitive
Load in DC Mode
1.00 uF < 1 kV 0.08 uF < 4 kV
0.75 uF < 2 kV 0.04 uF < 5 kV
0.50 uF < 3 kV 0.01 uF < 6 kV
AC Wave Form
Sine Wave, Crest Factor = 1.3 - 1.5
AC Output Frequency
Range:
50/60 Hz, user selection
0 - 200 mΩ for 10.1 - 25.0 A
0 - 150 mΩ for 25.1 - 30.0 A
Resolution:
1 mΩ
Accuracy:
± (2% of setting + 2 mΩ)
Dwell Timer
Range:
Resolution:
Accuracy:
0, 0.5 - 999.9 sec, (0 = continuous)
0.1 sec
± (0.1% + 0.05 sec)
Milliohm Offset
Max. Offset
Capability:
Resolution:
Accuracy:
0 - 100 mΩ
1 mΩ
± (2% of setting + 2 mΩ)
GENERAL SPECIFICATIONS
Memories
Allows storage of up to 6 different test programs and 6 steps
per memory and a single step mode
Remote I/O
Input:
Output:
Interface
Optional RS-232 interface
Lockout capability to avoid unauthorized access to test
set-up programs
Software & adjustments made through front panel
Test, Reset, Interlock & recall memory 1-6
Pass, Fail, Test-In-Process
Output Regulation
± (1% of setting + 5 V) from no load to full load
Security
Dwell Timer
Range:
Resolution:
Accuracy:
0, 0.2 - 999.9 sec, (0 = continuous)
0.1 sec increments
± (0.1% + 0.05 sec)
Calibration
Ramp Timer
Range:
Resolution:
Accuracy:
0.1 - 999.9 sec
0.1 sec increments
± (0.1% + 0.05 sec)
Mechanical
Bench or rack mount with tilt up front feet
Dimensions
4320
11" x 3.5" x 17" (280 x 89 x 430 mm)
4520
16.9" x 5.2" x 15.7" (430 x 133 x 400 mm)
4320
33 lbs. (15 kg)
4520
54 lbs. (24.5 kg)
(W x H x D)
Weight
18
20
500 VDC
MΩ
Range:
Failure Detector
Resolution: 1 mΩ
Accuracy: ±
(3% of reading + 3 mΩ) for 3 - 5.9 A
± (2% of reading + 2 mΩ) for 6 - 40 A
Voltage Display
Output Frequency
9.25 lbs. (4.2 Kg)
0 - 600 mΩ
100 - 1000 VDC
1V
± (2% of reading + 5 V)
Output Voltage
264
0 - 600 mΩ
Range:
Resolution:
Accuracy:
GROUND BOND TEST MODE
16.93" x 5.20" x 11.81" (430 x 132 x 300 mm
Specifications subject to change without notice.
Output Voltage
Range: 0 - 20.00 mAAC, 0 - 5.00 mADC
Resolution: 0.01 mA
Accuracy: ± (2% of reading + 0.02 mA)
266
Resolution: 1 mΩ
Accuracy: ±
(3% of reading + 3 mΩ) for 3 - 5.9 A
266
15 A slow blow 250 VAC
Option to turn On or Off, when On you can switch
between two security levels:
Resolution: 0.1 A
Accuracy: ± (3% of reading + 0.1 A)
Ohmmeter
4520
Current Display
1. Run - Operator can only run a test. No ability to
change memory locations or edit test parameters.
0 - 150 mΩ for 30.1 - 60.0 A
0 - 200 mΩ for 15.1 - 30.0 A
0 - 600 mΩ for 3.0 - 15.0 A
6.3 A 250 V slow blow
Voltage Setting/
Display
Resolution: 0.01 V
Accuracy: ± (2% of setting + 0.02 V)
Security
4320
0.00 - 9.00 VAC
Resolution: 0.01 V
Accuracy: ± (2% of setting + 0.02 V)
266
50/60 Hz ± 5%
Fuse
0.00 - 6.00 VAC
3.0 - 60.0 AAC
Voltage 6 VAC (fixed)
Frequency
264
266
264
115/230V Auto Range, ± 15% variation
Output Rating
266
Regulation: ± (2% of setting + 0.1A)
115/230 VAC ± 10%, user selection
4520
DIELECTRIC WITHSTAND TEST MODE
3.0 - 40.0 AAC
Offset Limit Settings
4320
Display the voltage drop across the circuit instead of the
resistance measurement.
264
Resolution: 0.1 A
Offset Limit Settings
Voltage
Memories
INSULATION RESISTANCE TEST MODE
Specifications subject to change without notice.
Safety Made Simple®
hipot.com
Toll Free +1-800-504-0055
Phone
Phone+1-847-932-3662
+1-847-932-3662
21
INDEX
INDEX
6000 SERIES SPECIFICATIONS
INPUT
2200 SERIES SPECIFICATIONS
RUN TEST MODE
Voltage
115 / 230 V selectable, ± 10 % variation
Frequency
50/60 Hz ± 5%
Fuse
6.3 A slow blow 250 VAC
DUT Power
Current:
Voltage Display
Range:
0 - 277.0 VAC Full Scale
Short Circuit
Protection
Short circuit current 50 A < 3 s
Inrush current 180 A
Response time 10 µs
Delay Timer
Range:
0.2 - 999.9 seconds
Dwell Timer
Range:
0, 0.1 - 999.9 seconds (0 = continuous)
Range:
Resolution:
Accuracy:
Timer Display
Range:
0 - 999.9 seconds
Ripple:
0 - 30.00 mAAC
0 - 5.00 mADC
0.01 mA
± (2% of reading + 0.02 mA)
Voltage
Range:
0 - 277.0 VAC
Current
Range:
0 - 30.0 AAC
Watts
Range:
0 - 8400 W
Range: 0 - 30.00 mA
Accuracy: ± (2% of setting + 0.02 mA)
Power Factor
Range:
0 - 1.000
Leakage Current
Range:
0 - 10.00 mA (0 = off)
3.5 kV @ 30 mAAC
4.0 kV @ 5 mADC
Voltage Setting
Range:
Resolution:
Accuracy:
Current Display
Range:
Resolution:
Accuracy:
HI-Limit
LO-Limit
AC
DC
0 - 3.50 kVAC
0 - 4.00 kVDC
0.01 kV
± (2% of setting + 5 V)
Range: 0-5.00 mA
Accuracy: ± (2% of setting + 0.02 mA)
Voltage:
Audible and Visual
LEAKAGE CURRENT TEST MODE
DC Output Ripple
5% Ripple RMS at 6 kVDC @ 5 mA, resistive load
DUT Power
Discharge Time
≤ 200ms
Max. Capacitive
Load in DC Mode
1.00 uF
< 1 kV
0.50 uF
< 3 kV
0.75 uF
< 2 kV
0.08 uF
< 4 kV
AC Waveform
Sine Wave, Crest Factor = 1.3 - 1.5
AC Output Frequency
Range:
Output Regulation
± (1% of setting + 5 V) from no load to full load
Dwell Timer
Range:
0, 0.2 - 999.9 sec, (0 = continuous)
Ramp Timer
Range:
0.1 - 999.9 sec
Resistance Display
Range:
Resolution:
HI-Limit/LO-Limit
Delay Timer
Range:
Range:
0, 0.5 - 999.9 sec, (0 = continuous)
GROUND BOND TEST MODE
Output Voltage
Range:
6 VAC fixed
Output Frequency
Range:
50/60 Hz, user selectable
Output Current
Range:
3.0 - 30.0 AAC
Current Display
Range:
0.0 - 30.0 A
Range:
0 - 510 mΩ for 3.0 - 10.0 A
HI-Limit
LO-Limit
0 - 200 mΩ for 10.1 - 25.0 A
1 A 250 VAC fast acting
INSULATION RESISTANCE TEST MODE
Output Voltage
30 - 1000 VDC
1V
± (1% of setting + 1 V) (relative to displayed
output)
< 2%
Voltage Display
Low Range:
High
Range:
Resolution:
Accuracy:
0 V - 100 V
101 V - 1000 VDC
0.1 V (low range), 1 V (high range)
± (2% of reading + 2 V)
Resistance Display
Range:
0.01 MΩ - 200.0 GΩ (4 digit, auto ranging)
Resolution:
30-499 VDC
500-1000 VDC
.001 MΩ
- .1 MΩ
.1 MΩ - 1 GΩ
.1 MΩ - 1 GΩ
1 MΩ
- .01 GΩ
1 GΩ - 20
GΩ
1 GΩ - 20 GΩ
0 - 277.0 VAC Full Scale
Short Circuit
Protection
Short circuit current 50 A < 3s
Inrush current 180 A
Response time 10 µs
0.1MΩ - 1GΩ
± (3% of reading + 2 counts)
Range:
0 µA - 6000 µA
1 - 20GΩ
± (5% of reading + 2 counts)
Accuracy (DC):
15 to 100 kHz ± (2% of reading + 3 µA)
> 100 k to 1 MHz ± 5% of reading
0.1MΩ - 1GΩ
± (2% of reading + 2 counts)
1 - 20GΩ
± (3% of reading + 2 counts)
Measuring Device
0.1 GΩ
20- 200GΩ
± (10% of reading + 2 counts)
Range:
Resolution:
Accuracy:
0 - 999.99 seconds
0.1 seconds
± (0.1% of reading + 0.05 seconds)
Failure Settings
Low Limit:
0.1 MΩ - 999.9 MΩ
Neutral, Reverse, Ground
HI-Limit/LO-Limit
Range:
0 - 6000 µA
1000 MΩ - 9999.MΩ
Delay Timer
Range:
0, 1.0 - 999.9 sec, (0 = continuous)
10.0 GΩ - 200.00 GΩ
GENERAL SPECIFICATIONS
Memories
20 memories with 10 steps per memory
Remote I/O
Input:
Output:
Interface
RS-232 interface
Security
Key lock and memory lock capability to avoid unauthorized
access
Terminations
6' (1.80 m) high voltage and (2) return leads w/ clips
Calibration
Software & adjustments made through front panel
Test, Reset, Interlock & recall memory 1-6
Pass, Fail, Test-In-Process
Bench or rack mount with tilt up front feet
Dwell Timer
Range:
0, 0.5 - 999.9 sec, (0 = continuous)
Operating Temperature: 32o - 104o F (0o - 40o C)
Relative Humidity: 0 - 80%
Milliohm Offset
Range:
Accuracy
0 - 100 mΩ
± (2% of setting + 2 mΩ)
Dimension (W x H x D)
16.9" x 5.2" x 19.6" (430 x 133 x 500 mm)
Weight
48.5 lbs. (22 kg)
Software & adjustments made through front panel
Line Cord
Detachable 6' (1.80 m) power cable terminated in a three
prong grounding plug
Terminations
High Voltage Output: Alden Socket
Shielded Return: BNC Connector
Dimension (W x H x D)
4.75" x 5.25" x 11.75" (120 x 133 x 300 mm)
Weight
11 lbs. (5 kg)
Specifications subject to change without notice.
20 GΩ - 200 GΩ
Timer Display
G-L
Environmental
Calibration
500 - 1000 V
Line Condition
Mechanical
Provided through 9 pin D type connector
1. Inputs: Test, Reset, SafetyInterlock
2. Outputs: Pass, Fail and Test-in-Process
30 - 499 V
Probe
± (2% of setting + 2 mΩ)
Remote I/O
Accuracy:
UL544 Non Patient
IEC60990 Fig4-U2
UL2601-1, UL60601-1
Frequency Check, External MD (1k Ω)
External MD (1k Ω)
A
B
C
F
X
0 - 150 mΩ for 25.1 - 30.0 A
Safety Made Simple®
Fuse
Range:
Leakage Current
(RMS Only)
Voltage:
Accuracy:
18
22
50/60 Hz ± 5%
Voltage Display
100 - 1000 VDC
± (2% of reading + 5 V)
1 - 1000 MΩ (0 = off)
Frequency
Current:
50/60 Hz, user selection
1 - 1000 MΩ (4 digit, auto ranging)
500 VDC
1000 VDC
MΩ
MΩ
MΩ
0.01
1.00 - 40.00
1.00 - 80.00
0.1
35.0 - 999.9
75.0 - 999.9
115/230 V selectable, ± 15% variation
0 - 277 VAC Single Phase Unbalanced
0 - 30 A maximum
30 AAC max continuous
INSULATION RESISTANCE TEST MODE
Range:
Accuracy:
Voltage
Leakage current measuring resistor MD=2KΩ ± 1%
Failure Detector
Output Voltage
GENERAL SPECIFICATIONS
0 - 277 VAC Single Phase Unbalanced
0 - 30 A maximum
30 AAC max continuous
DIELECTRIC WITHSTAND TEST MODE
Output Rating
INPUT
Dwell Timer
1.0 - 999.9 seconds, 0.1 seconds/step, (0=continuous)
Delay Timer
0.1 - 999.9 seconds, 0.1 seconds/step
Discharge
Automatic discharge of device under test
Indicator: Green < 30 V, Red > 30 V
Why We Use Counts: Slaughter publishes some specifications using “counts” which allows us to provide a better indication of the tester’s capabilities across measurement ranges. A “count” refers
to the lowest resolution of the display for a given measurement range. For example, if the resolution for voltage is 1V then 2 counts = 2V.
hipot.com
Toll Free +1-800-504-0055
Phone
Phone+1-847-932-3662
+1-847-932-3662
23
INDEX
SAFETY STANDARD REFERENCE CHART
Standard /
Harmonized
Standard
IEC/UL 60601-1
3rd Edition Medical
Electrical Equipment
Testing
Type
Performance
Dielectric Withstand
Test Voltage
500 – 4000 VAC
or 707 – 5656 VDC
Max I.
Ground Bond/Continuity
Test
Time
Earth
Leakage
Insulation
Resistance
Suggested
Model #
Test
V
Current Limit
Max. R
10-25 A
≤6V
≤ 0.1 Ω
5s
110% x
5-10 mA
rated V
N/A
6330
1 or 60 s 10-25 A
≤6V
≤ 0.1 Ω
5s
N/A
N/A
4320, 4520
60 s
Test Time
No Breakdown
Test
Voltage Max I.
Test V
Min Slaughter Tester
Time Limit R
Production
1000 – 3000 VAC
Performance
900-1079 VAC
or 1273-1526 VDC
No Breakdown
60 s
Continuity
N/A
N/A
294, 295,
296, 297
Production
1080-1250 VAC
or 1527-1768 VDC
No Breakdown
1s
Continuity
N/A
N/A
294, 295,
296, 297
H.U.D. Specification
#24 CFR 3280.810
Performance
900 VAC or 1280 VDC
No Breakdown
60 s
Continuity
N/A
N/A
294, 295,
296, 297
Production
1080 VAC or
1530 VDC
No Breakdown
1s
Continuity
N/A
N/A
294, 295,
296, 297
500 – 2400 VAC x rated V
No Breakdown
+ 2400 VAC
60 s
≥ 10 A
≤ 12 V
0.1 – 0.2
Ω
≤ 120 s
1.06 x
rated V
N/A
6330 + 298*
1s
≥ 10 A
≤ 12 V
0.1 – 0.2
Ω
No time
specified
N/A
N/A
4520
N/A
6330 + 298*
N/A
4520
SHIP IT
SAFE
PROGRAM
Due for Calibration?
WHAT’S INCLUDED:
Call Us At
800-504-0055
To Order Your
Ship It Safe Box!
• OVERNIGHT SHIPMENT OF
CUSTOM BOX AND INSERTS
R.V.I.A. (NEC)
IEC 60335-1
Household Electrical
Appliances
UL 60335-1
Household Electrical
Appliances
IEC 60598-1
Luminaires
Performance
Production
400 – 2500 VAC
5-30 mA
500 V – 2400 VAC x rated
Performance
No Breakdown
V + 2400 VAC
Production
Performance
400 – 2500 VAC
5-30 mA
500 – 4 x rated V + 2000
No Breakdown
VAC
Production
Performance
UL 1598 Luminaires
Production
IEC/UL 61010-1 &
CSA 22.2 No. 610101 Laboratory Control
Test & Measurement
Equipment
EN 60204-1
Electrical Equipment
of Machines
UL 45A Portable
Electrical Appliances
Performance
1000 VAC - 1000 VAC x 2
x rated V
Production
EN 60950-1 EN
50116 Information
Technology
Equipment
Performance
UL 60950-1 CSA
22.2 No. 609501 Information
Technology
Equipment
Performance
Production
Production
≤ 6.5 V
≤ 0.5 Ω
120 s
1s
40 A
≤ 12 V
0.1 – 0.2
Ω
No time
specified
N/A
60 s
≥ 10 A
≤ 12 V
≤ 0.5 Ω
60 s
Rated V
0.5 – 10
mA
60 s
500
VDC
1-4
MΩ
60 s
30 A
≤4V
1200 VAC
1s
Continuity
≤ 10
5 - 60 s 25 or 30 A V or ≤
12 V
840 - 11940 VAC or 1200
No Breakdown 5 s max
- 7500 VDC
ramp
up
2s
dwell
2 x rated V or
1000 VAC
≤ 0.1 Ω
120 s
≤ 0.1 Ω
Continuity
≤ 0.1 Ω
or <4 V
0.133 Ω
60 or 120 s
No Breakdown
1s
Continuity
0.2 10 A
≤ 24 V
Refer to
Section
18.2.2
No time
specified
N/A
N/A
< 300 V
0.5 mA
N/A
No time
specified
N/A
No time
specified
500
VDC
≥2
MΩ
295, 296
N/A
6330 + 298*
N/A
294, 295,
296, 297
500 V
≥1
MΩ
1000 – 3000 VAC
or 1414 – 4242 VDC
1000 – 3000 VAC
or 1414 – 4242 VDC
*This standard requires the use of a 500VA Hipot tester.
60 s
Continuity
1s
Continuity
0.5 – 3.5
mA
60 s
N/A
120 s
30 A
≤ 12 V
≤ 0.1 Ω
60 s
1-4s
25 A
≤ 12 V
≤ 0.1 Ω
1-4 s
60 s
≤ 40 A
≤ 12 V
≤ 0.1 Ω
60 s
4320
294, 295,
296, 297
< 300 V
< 300 V
No Breakdown
0.25 –
3.5 mA
0.25 –
3.5 mA
≥ 50
KΩ
N/A
60 s
N/A
< 300 V
500 V
500 V
N/A
60 s
500 V
6330
294, 295
≥2
MΩ
6330
4320
≥2
MΩ
6330
No Breakdown
1–6s
Continuity
N/A
N/A
• CONVENIENT, WORRY-FREE
METHOD TO RETURN YOUR
TESTER TO US
• ALL TESTERS ARE CALIBRATED IN
AN A2LA ACCREDITED LAB
hipot.com
4520
N/A
Not Specified - Responsibility of Manufacturer
1000 VAC + 2 x rated V
or DC equivalent
No Breakdown
1000 - 3000 VAC
6330 + 298*
294, 295,
296, 297
No Breakdown
Production
Performance
40 A
0.25 –
5.0 uA
Not Specified - Responsibility of Manufacturer
Performance
Production
60 s
1.06 x
rated V
0.25 –
5.0 uA
• DETAILED RETURN PACKAGING
INSTRUCTION SHEET, PLUS A
VIDEO!
Our new ship it safe program provides the
packaging and peace of mind you need to ensure
your tester arrives in perfect condition. Call
us when you’re ready to return your tester for
calibration or repair and we’ll overnight a custom
shipping box for a flat fee of $100.00.
294, 295, 296
REMEMBER
Choose us for your annual calibration needs and we’ll extend
your warranty at no additional cost for up to 3 years!
SCAN TO
LEARN MORE
We ship all standard calibrations within 2 business days
and repairs within 3 business days.
Resources
Quick Start Videos Get your tester up and running
quickly and easily with our simple set-by-step videos.
Quick Start Guides We made our Quick Start Guides
simpler than ever. Featuring visual step-by-step
instructions and easy menu visuals, you'll be up and
testing in minutes!
Also check out our Manuals, Specifications
and Whitepapers.
Be sure to check out our
ELECTRICAL SAFETY
TESTING GUIDE
Brush up on the basics of Electrical
Safety Testing with useful information like safe
workstation best practices, application specific
test information, and more!
Trade-In Policy
Don’t leave an old, broken, or unused tester lying around – trade it in for huge savings! We offer a generous
trade-in discount of up to $400 off the cost of a new SCI tester. All trade-ins are always recycled!
We accept ALL TESTERS in any condition, of ANY BRAND, MAKE, or MODEL.
INTERNATIONAL PRESENCE
We have sales representatives located throughout the world to assist you in purchasing the
right electrical safety tester that fits your needs. These offices also provide local product support.
At SCI we strive for reducing the environmental footprint of the manufacturing industry in every way. From the
trade-in testers we recycle, to the LED energy efficient bulbs we have throughout our facility, we care about our
impact and work to minimize our effect on the environment.
Please contact us for more information
[email protected][email protected] • hipot.com/contact
Testers For Electrical Safety Compliance
28105 N. Keith Drive, Lake Forest, IL 60045 USA
+1-847-932-3662 • +1-800-504-0055 • Fax +1-847-932-3665 • hipot.com • [email protected]
© 2016 Slaughter Company, Inc.
V1.0 1/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement