datasheet for MBR10150CTP by Diodes Inc.
MBR10150CTP
10A SCHOTTKY BARRIER RECTIFIER
Features
Mechanical Data
•
•
•
•
•
•
•
Low Forward Voltage Drop
Soft, Fast Switching Capability
Schottly Barrier Chip
ITO-220S Heat Sink Tab Electrically Isolated from Cathode
UL Approval in Accordance with UL 1557, Reference No.
E94661
•
•
Case: ITO-220S
Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 1.335 grams (approximate)
4 Isolated
2
Common
1 Cathode 3
Anode
Anode
Top View
Bottom View
Package Pin Out
Configuration
Ordering Information (Note 1)
Part Number
MBR10150CTP
Notes:
Case
ITO-220S
Packaging
50 pieces/tube
1. For packaging details, go to our website at http://www.diodes.com.
Marking Information
MBR
10150CTP
MBR10150CTP = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last two digits of year (ex: 08 = 2008)
WW = Week (01 - 53)
YYWW AB
MBR10150
Document number: DS31499 Rev. 9 - 2
1 of 4
www.diodes.com
April 2011
© Diodes Incorporated
MBR10150CTP
Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
(Per Leg)
Average Rectified Output Current
(Total)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Isolation Voltage
From Terminal Heatsink t = 1 min.
Symbol
VRRM
VRWM
VRM
Value
Unit
150
V
IO
5
10
A
IFSM
105
A
VAC
2000
V
Symbol
RθJC
TJ, TSTG
Value
3
-65 to +175
Unit
°C/W
°C
Thermal Characteristics (Per Leg)
Characteristic
Typical Thermal Resistance Junction to Case
Operating and Storage Temperature Range
Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified
Characteristic
Symbol
Forward Voltage Drop
VF
Leakage Current (Note 2)
IR
Typ
-
Max
0.91
0.75
0.05
20
Unit
V
mA
Test Condition
IF = 5A, TJ = 25ºC
IF = 5A, TJ = 125ºC
VR = 150V, TJ = 25ºC
VR = 150V, TJ = 125ºC
2. Short duration pulse test used to minimize self-heating effect.
100
IR, INSTANTANEOUS REVERSE CURRENT (µA)
IF, INSTANTANEOUS FORWARD CURRENT (A)
Notes:
Min
-
10
1
TA = 150°C
TA = 125°C
0.1
T A = 85°C
0.01
TA = 25°C
0.001
0.0001
1,000
0
200
400
600
800
1,000 1,200
VF, INSTANTANEOUS FORWARD VOLTAGE (mV)
Fig. 1 Typical Forward Characteristics
MBR10150
Document number: DS31499 Rev. 9 - 2
2 of 4
www.diodes.com
T A = 150°C
100
TA = 125°C
10
TA = 85°C
1
TA = 25°C
0.1
0.01
0
30
60
90
120
150
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 2 Typical Reverse Characteristics
April 2011
© Diodes Incorporated
MBR10150CTP
IF(AV), AVERAGE FORWARD CURRENT (A)
10
RθJA = RθJC
Total Device
5
RθJA = 21°C/W
Per Element
0
25
50
75
100
125
TA, AMBIENT TEMPERATURE (°C)
Fig. 3 Forward Current Derating Curve
150
Package Outline Dimensions
ITO-220S
A
E
Q
DIM.
A1
+
7 ° Ref
H1
+
ØP
D
Ø1.5
Dp 0.1 max
D1
D2
1.7 Ref
5° Ref
E1
5° Ref
A2
L1
b2
L
e
5 ° Ref
MBR10150
Document number: DS31499 Rev. 9 - 2
b
c
e1
5 ° Ref
3 of 4
www.diodes.com
MIN.
MAX.
TYP.
A
4.52
4.62
4.57
A1 1.17
1.39
−
A2 2.57
2.77
2.67
b
0.72
0.95
0.84
b2 1.15
1.54
1.26
c 0.356 0.61
−
D 14.22 16.51 15.00
D1 8.60
8.80
8.70
D2 13.68 14.08
−
e
2.49
2.59
2.54
e1 4.98
5.18
5.08
E 10.01 10.21 10.11
E1 6.86
8.89
−
H1 5.85
6.85
−
L 13.30 13.90 13.60
L1
4.00
−
−
P
3.54
4.08
−
Q
2.54
3.42
−
All Dimensions in mm
April 2011
© Diodes Incorporated
MBR10150CTP
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
MBR10150
Document number: DS31499 Rev. 9 - 2
4 of 4
www.diodes.com
April 2011
© Diodes Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement