- No category
advertisement
▼
Scroll to page 2
10-Bit Digital Video with Bi-Directional Data (RS232, RS422 and RS485 2 & 4 Wire) Pelco and Panasonic “Up-The-Coax” FVT/FVR1031(M,S)1 INCLUDED HARDENED 1 1 The ComNet™ FVT/FVR1031 transmits 10 bit digital video and full duplex data over one Singlemode or Multimode fiber. The video supports NTSC, PAL and SECAM CCTV camera systems. The data supports RS232, RS422 and RS485 (2W & 4W) at data rates up to 115 Kbps (NRZ). The FVT/FVR1031 series also supports “UP-THE-COAX” control signals for Pelco and Panasonic cameras with a maximum distance of 1500 feet (590 meters). The product is “Plug-and-Play” with no electrical or optical adjustments. FEATURES › 10-bit digitally encoded video transmission › Automatic resettable fuses on all power lines › Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces › Distances up to 43 mi (69 km) › Compatible with all NTSC, PAL, or SECAM CCTV camera systems ›Interchangeable between stand-alone or rack mount use – ComFit › Supports Pelco and Panasonic “UP-THE-COAX” control signals for a distance up to 1500 feet (590 meters). › May be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate. › Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance › Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters › Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. › Lifetime Warranty › Hot-Swappable Modules APPLICATIONS › High Performance CCTV with PTZ Camera Control › Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events. LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427 10-Bit Digital Video with Bi-Directional Data (RS232, RS422 and RS485 2 & 4 Wire) Pelco and Panasonic “Up-The-Coax” FVT/FVR1031(M,S)1 SPECIFICATIONS Video Connectors Video Input 1 volt pk-pk (75 ohms) Overload >1.5 V pk-pk Bandwidth 5 Hz - 10 MHz Differential Gain <2% Differential Phase <0.7˚ Tilt<1% Signal-to-Noise Ratio (SNR)67 dB @ Maximum Optical Loss Budget Max. RG-59 COAX Distance100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth Optical ST (Standard) SC of FC (Optional) Power Terminal Block Video BNC (Gold Plated Center-Pin) DataTerminal Block Power Operating Voltage Range Power Consumption Data Electrical & Mechanical Data FormatRS-232, RS-422, 2 or 4-wire RS-485 w/Tri-State, Manchester, bi-phase and up-the-coax data Data Rate DC-115 Kbps (NRZ) Wavelength 1310/1550 nm, MM and SM Number of Fibers 1 Optical Emitter Laser Diode Number of Rack Slots 1 Current ProtectionAutomatic Resettable Solid-State Current Limiters Circuit Board Meets IPC Standard Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Shipping Weight <2 lb / 0.9 kg Environmental LED Indicators› Video Sync Presence › Received Data 8 to 15 VDC (or from C1 Rack, sold separately) 2W › Transmitted Data › Optical Carrier Detect MTBF>100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 0% to 95% (non-condensing)¹ ORDERING INFORMATION Part Number Description Fiber Optical PWR Max. UTC Budget Max. Distance² Distance² FVT1031M1 Video Transmitter/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 mi) 1 km (0.6 mi) FVR1031M1 Video Receiver/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 mi) 1 km (0.6 mi) FVT1031S1 Video Transmitter/Data Transceiver Single Mode 9/125µm 23 dB 69 km (43 mi) 1 km (0.6 mi) Single Mode 9/125µm 23 dB 69 km (43 mi) 1 km (0.6 mi) FVR1031S1 Video Receiver/Data Transceiver Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included) Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (extra charge, consult factory) Add ‘/SC’ for SC Connectors Add ‘/FC’ for FC Connectors DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4) NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. [2] Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to improve and advance technology, product specifications are subject to change without notice. TYPICAL APPLICATION V D FVT1031S1 FVR1031S1 1 Fiber V D OPTICAL FIBER VIDEO (Coax) 3 CORPORATE DRIVE | DANBURY, CONNECTICUT 06810 | USA | T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected] 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE | T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected] © 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks. 30 Dec 2014
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project