Catalogue Sheet: 12ESL

Catalogue Sheet: 12ESL
Project/Location:
Contractor:
12ESL-SR Series
Date:
High Capacity Combination Unit
Prepared by:
Typical specifications
Features
• Standard 120/347Vac input
• Selection of lamp head styles
• Solid state pulse type charger standard
• Sealed dust-proof transfer relay
• Optional self-diagnostic charger (110W only)
• Available in 12V, 110, 144, 250 and 360W
• Long life, maintenance free lead acid battery
• Fully C860 approved “SORTIE” legend illuminated with ALINGAP
LEDs and meets or exceeds CSA 22.2 No. 141.
• High-quality steel enclosure with corrosion-resistant undercoating
Supply and install the Emergi-Lite® 12ESL-SR Series LED “SORTIE’’
combo unit. The housing and faceplate shall be constructed of steel.
The faceplate shall come standard with knockout chevrons.
The light source shall be light emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation. Red
LED technology shall be ALINGAP. The power pack, rechargeable
battery and LEDs shall be contained in a single housing. A diffuser
optimized for LEDs shall be mounted behind the legend to provide
the 6” high by 3/4” stroke letters with even illumination. The power
pack is furnished with a test switch and high charge pilot light. The
unit shall be designed to provide Exit Sign illumination from the
normal AC source. When a power failure occurs, the mounted heads
along with the Exit Sign are illuminated in emergency mode for a
minimum of 30 minutes. The power available for emergency lights
shall be 110W or as otherwise specified. The heads shall require no
tools to adjust and aim. The heads will be constructed of durable
thermoplastic and use 6V, 9W lamps or as otherwise specified. The
Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141.
The equipment shall be Emergi-Lite® Model:
Dimensions
Dimensions are approximate and subject to change.
101/4”
[26.1 cm]
137/8” [35.4 cm]
161/8” [41.1 cm]
Cabinet C
Wire guards
460.0034-E
231/8” [58.8 cm]
51/2” [13.8 cm]
Wall Mount
51/2” [13.8 cm]
POwer consumption and unit ratinG
Model
AC Specs
Sortie Sign Module
12ESL110
12ESL144
12ESL250
12ESL360
30min
Less than 2W
0.25/0.10 A
0.25/0.10 A
0.45/0.15 A
0.45/0.15 A
120/347VAC
110
144
250
360
Wattage Capacity
1h00
1h30
2h00
64
84
144
210
45
60
100
150
36
48
83
120
4h00
18
24
42
60
ordering information
Series, voltage
and wattage
12ESL110= 12V - 110W
12ESL144= 12V - 144W
12ESL250= 12V - 250W
12ESL360= 12V - 360W
colour
Blank= factory
white
B= black
lettering
voltage
options
SR= SORTIE
Blank=
120/347Vac
2= 277Vac
Blank= no
options
U= autodiagnostics
(110W only)
# of
heads
/0= no
heads
/1= one
head
/2= two
heads
/3= three
heads
heads style and wattage
Blank= large tungsten, 12V-9W, wedge base
-18= large tungsten, 12V-18W, wedge base
-25= large tungsten, 12V-25W, DCB
150MK= MR16 Deco head EF150, 12V-12W
150MA= MR16 Deco head EF150, 12V-20W
150MB= MR16 Deco head EF150, 12V-35W
150MC= MR16 Deco head EF150, 12V-50W
LG= MR16 LED, 12V-4W
LI= MR16 LED, 12V-5W
LJ= MR16 LED, 12V-6W
H= large halogen, 12V-8W, quartz sealed beam
H12= large halogen, 12V-12W, quartz sealed beam
M= mini tungsten, 12V-9W, wedge base
M18= mini tungsten, 12V-18W, wedge base
MQ= mini halogen, 12V-8W, quartz bi-pin
MQ12= mini halogen, 12V-12W, quartz bi-pin
MK= MR16 halogen, 12V-12W
MA= MR16 halogen, 12V-20W
Q= large halogen, 12V-8W, quartz bi-pin
Q12= large halogen, 12V-12W, quartz bi-pin
Q20= large halogen, 12V-20W, quartz bi-pin
Q55= large halogen, 12V-55W, quartz bi-pin
S12= large tungsten, 12V-12W, sealed beam
S18= large tungsten, 12V-18W, sealed beam
S25= large tungsten, 12V-25W, sealed beam
Note: Other styles available. Consult your sales
representative.
EXAMPLE: 12ESL110EX/0M
53
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement