Hydrofit Quick Connect Fittings Catalog

Hydrofit Quick Connect Fittings Catalog
Quick Connect Fittings Catalog 2014
www.HydrofitQuickConnect.com
www.HydrofitQuickConnect.com
Hydrofit™ QUICK CONNECT
Fittings
Are your best choice for all of your connection needs.
HYDROFIT™ - Quality and Innovation
HYDROFIT™ - Quick Connect Fittings offer you a quality engineered product designed to give you a
reliable connector for a reliable connection. HYDROFIT™ - Quick Connect Fittings have been designed
to provide you with all the typical benefits and ease of use of a quick connect fitting while providing you
with an user friendly ergonomically pleasing design.
Made from FDA approved
high grade Polyacetal. HYDROFIT™ Fittings are
designed to meet strict
market requirements and are manufactured under
precise tolerance levels.
HYDROFIT’s innovative design is not only an aesthetically
appealing improvement to conventional quick connect fittings,
our improved valve handle design allow for ease of use for
installers, maintenance personnel and end users everywhere.
The HYDROFIT™ exclusive HYDRO FIN DESIGN valve handles
accommodate for an easier grip, less strain and smoother ball
rotation for truly quick and easy operation.
Hydrofit™ QUICK CONNECT
HYDROFIT™ - Quick Connect Fittings have been tested by NSF International under NSF/ANSI Standard
61 and comply with FDA requirements for all materials in contact with food and drinking water.
HYDROFIT™ - Quick Connect Fittings have been Independently Tested to NSF/ANSI 58 Standards
for Burst pressure, Static pressure and Cyclic pressure testing (see chart) and undergo rigorous quality
assurance testing for quality performance time and time again.
Fittings
HYDRO FIN DESIGN handles
are ergonomically designed,
offer ease of use, and provide
a smoother valve rotation.
Hydrofit™ QUICK CONNECT
HYDROFIT™ - Well Connected(SM)
Fittings
HYDROFIT™ - Quick Connect Fittings are ideal for use on a broad
range of applications; Reverse Osmosis Systems, Water Coolers,
Coffee Machines, RV’s, Misting Systems, Marine, Point-of-Use
Filtration, Beverage Dispensing, Ice Makers, Car Wash Systems
and many others. HYDROFIT™ - Quick Connect Fittings are
designed to be used with potable water but are also compatible
with a wide range of chemicals (see chart) to suit your multiple
application needs.
Are suitable for water
and multiple liquids.
Manufactured with safe, non toxic FDA approved material.
Certified to NSF /ANSI
Standard 61
Independently tested to
NSF /ANSI Standard 58
Testing Criteria
HYDROFIT™ - Quick Connect Fittings do not require the use of
any special tools for installation and create a tight seal on many
tubing types. They offer a compact design, high durability, ease of
use, consistent quality and an unparalleled cost to benefit ratio. In
short, there is no disputing that with HYDROFIT™ you are truly…
Well connected!
• Static - 3x Rated Pressure or 300 PSI minimum
• Burst - 4x Rated Pressure or 400 PSI minimum
• Cyclic - 100,000 cycles at 150 PSI
2
NSF
®
All materials in contact with food
and drinking water are in compliance
with the United States Food
and Drug Administration
Certified to NSF/ANSI
standard 61
USDA NSF H1
The grease used in Hydrofit
Quick Connect fittings conforms
to USDA NSF H1 recommendations
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
HDF-MC
Male Connectors
Part Number
Description
Packaging
Case Qty
HDF-MC0402
1/4" Tube x 1/8" NPTF Male Connector
500
2500
HDF-MC0404
1/4" Tube x 1/4" NPTF Male Connector
400
2000
HDF-MC0406
1/4" Tube x 3/8" NPTF Male Connector
400
2000
HDF-MC0604
3/8" Tube x 1/4" NPTF Male Connector
300
1500
HDF-MC0606
3/8" Tube x 3/8" NPTF Male Connector
250
1250
HDF-MC0608
3/8" Tube x 1/2" NPTF Male Connector
250
1250
HDF-MC0806
1/2" Tube x 3/8" NPTF Male Connector
200
1000
HDF-MC0808
1/2" Tube x 1/2" NPTF Male Connector
200
1000
Male Connector
HDF-FC
Female Connectors
Part Number
Description
Packaging
Case Qty
HDF-FC0404
1/4" Tube x 1/4" NPT Female Connector
350
1750
Female Connector
HDF-UC
Union Connectors
Part Number
Description
Packaging
Case Qty
HDF-UC04
1/4" Tube Union Connector
400
2000
HDF-UC06
3/8" Tube Union Connector
300
1500
HDF-UC0604
3/8" Tube x 1/4" Tube Reducing Union
300
1500
Union Connector
HDF-BU
Bulkhead Unions
Part Number
Description
Packaging
Case Qty
HDF-BU04
1/4" Tube x 1/4" Tube Bulkhead Union
300
1500
HDF-BU06
3/8" Tube x 3/8" Tube Bulkhead Union
180
900
HDF-BU0604
3/8" Tube x 1/4" Tube Bulkhead Union
300
1500
Bulkhead Union
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
3
www.HydrofitQuickConnect.com
HDF-BF
Brass Fitting
Brass fittings
Part Number
Description
Packaging
Case Qty
HDF-BF0404
1/4" Tube x 1/4" Flare Female Connector
150
750
HDF-BF0604
3/8" Tube x 1/4" Flare Female Connector
150
750
HDF-BF0606
3/8" Tube x 3/8" Flare Female Connector
100
500
HDF-BF0412
1/4" Tube x 3/4" Female National Hose Connector
100
500
HDF-fe
Fixed Elbow
Part Number
Description
Packaging
Case Qty
HDF-FE0402
1/4" Tube x 1/8" NPTF Fixed Elbow
500
2500
HDF-FE0404
1/4" Tube x 1/4" NPTF Fixed Elbow
400
2000
HDF-FE0406
1/4" Tube x 3/8" NPTF Fixed Elbow
300
1500
HDF-FE0604
3/8" Tube x 1/4" NPTF Fixed Elbow
300
1500
HDF-FE0606
3/8" Tube x 3/8" NPTF Fixed Elbow
250
1250
HDF-FE0608
3/8" Tube x 1/2" NPTF Fixed Elbow
250
1250
HDF-FE0808
1/2" Tube x 1/2" NPTF Fixed Elbow
150
750
Fixed Elbow
HDF-Ue
Union Elbows
4
Union Elbows
Part Number
Description
Packaging
Case Qty
HDF-UE04
1/4" Union Elbow
400
2000
HDF-UE06
3/8" Union Elbow
250
1250
HDF-UE0604
3/8" Tube x 1/4" Tube Union Elbow
250
1250
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
HDF-EC
Elbow Check Valve
Part Number
Description
Packaging
Case Qty
HDF-ECV0402
1/4" Tube x 1/8" NPTF Elbow Check Valve
500
2500
Elbow Check Valve
HDF-ICV
Inline Check Valves
Part Number
Description
Packaging
Case Qty
HDF-ICV04
1/4" Tube Inline Check Valve
300
1500
HDF-ICV06
3/8" Tube Inline Check Valve
150
750
Inline Check Valve
HDF-MBT
Male Branch Tees
Part Number
Description
Packaging
Case Qty
HDF-MBT0404
1/4" Tube x 1/4" NPTF X 1/4" Tube
300
1500
HDF-MBT0606
3/8" Tube x 3/8" NPTF X 3/8" Tube
200
1000
Male Branch Tee
HDF-SBT
Stem Branch tee
Part Number
Description
Packaging
Case Qty
HDF-SBT0404
1/4" Tube x 1/4" Stem X 1/4" Tube
300
1500
HDF-SBT0606
3/8" Tube x 3/8" Stem X 3/8" Tube
150
750
Stem Branch Tee
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
5
www.HydrofitQuickConnect.com
HDF-UT
Union Tees
Part Number
Description
Packaging
Case Qty
HDF-UT04
1/4" Tube Union Tee
300
1500
HDF-UT06
3/8" Tube Union Tee
150
750
HDF-UT0406
1/4" Run x 1/4" Run X 3/8" Branch
150
750
HDF-UT0604
3/8" Run x 3/8" Run x 1/4" Branch
150
750
Union Tee
HDF-SRT
STEM RUN TEE
Part Number
Description
Packaging
Case Qty
HDF-SRT0404
1/4" Tube x 1/4" Tube X 1/4" Stem
300
1500
HDF-SRT0606
3/8" Tube x 3/8" Tube X 3/8" Stem
200
1000
Stem Run Tee
HDF-MRT
Male Run Tees
Part Number
Description
Packaging
Case Qty
HDF-MRT0404
1/4" Tube x 1/4" Tube x 1/4" NPTF Male Run Tee
300
1500
HDF-MRT060404
3/8" Tube x 1/4" Tube x 1/4" NPTF Male Run Tee
250
1250
Male Run Tee
HDF-TW
Two-Way Dividers
Part Number
Description
Packaging
Case Qty
HDF-TW04
1/4" Tube x 1/4" Tube X 1/4" Tube
300
1500
HDF-TW06
3/8" Tube x 3/8" Tube X 3/8" Tube
120
600
Two-Way Divider
6
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
HDF-msa
Male Stem Adapters
Part Number
Description
Packaging
Case Qty
HDF-MSA0404
1/4" Stem x 1/4" Male NPTF
500
2500
HDF-MSA0604
3/8" Stem x 1/4" Male NPTF
500
2500
HDF-MSA0606
3/8" Stem x 3/8" Male NPTF
400
2000
Male Stem Adapter
HDF-ff
Faucet Fittings
Part Number
Description
Packaging
Case Qty
HDF-FF04
1/4" Tube x 7/16"-24 UNS Faucet
300
1500
HDF-FF06
3/8" Tube x 7/16"-24 UNS Faucet
300
1500
Faucet Fitting
HDF-pe
Plug In Elbow
Part Number
Description
Packaging
Case Qty
HDF-PE0404
1/4" Stem x 1/4" Tube Plug In Elbow
500
2500
HDF-PE0604
3/8" Stem x 1/4" Tube Plug In Elbow
300
1500
HDF-PE0606
3/8" Stem x 3/8" Tube Plug In Elbow
300
1500
Plug In Elbow
HDF-sc
Stem Connector
Part Number
Description
Packaging
Case Qty
HDF-SC0604
3/8" Stem x 1/4" Tube Connector
300
1500
Stem Connector
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
7
www.HydrofitQuickConnect.com
HDF-BVM
Male Ball Valves
Part Number
Description
Packaging
Case Qty
HDF-BVM0404
1/4" Tube x 1/4" Tube NPT Ball Valve Male
150
750
HDF-BVM0606
3/8" Tube x 3/8" Tube NPT Straight Valve
100
500
Male Ball Valve
HDF-BVI
Inline Ball Valves
Part Number
Description
Packaging
Case Qty
HDF-BVI04
1/4" Tube x 1/4" Tube Inline Ball Valve
150
750
HDF-BVI06
3/8" Tube x 3/8" Tube Inline Ball Valve
100
500
Inline Ball Valve
HDF-BVT
Tank Ball Valves
Part Number
Description
Packaging
Case Qty
HDF-BVT0404
1/4" Tube x 1/4" Female NPT Tank Ball Valve
120
600
HDF-BVT0604
3/8" Tube x 1/4" Female NPT Tank Ball Valve
100
500
Tank Ball Valve
HDF-FWA
FEED WATER ADAPTOR
Part Number
Description
Packaging
Case Qty
HDF-FWA-14
1/2" FNPT x 1/2” NPT x 1/4” Tube Feed Water Adaptor
150
750
HDF-FWA-38
1/2” FNPT x 1/2” NPT x 3/8” Tube Feed Water Adaptor
100
500
Plug
8
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
HDF-CT
Collets
Part Number
Description
Packaging
Case Qty
HDF-CT04
1/4" Collet White
1000
5000
HDF-CT06
3/8" Collet White
1000
5000
Collet
HDF-lc
Locking Clip
Part Number
Description
Packaging
Case Qty
HDF-LC04R
1/4" Locking Clip Red
1000
5000
HDF-LC06R
3/8" Locking Clip Red
1000
5000
Locking Clip
HDF-tc
Tube Cutter
Part Number
Description
Case Qty
HDF-TC
Tube Cutter
400
Tube Cutter
HDF-PG
Plug
Part Number
Description
Packaging
Case Qty
HDF-PG04WH
1/4" Plug White
1000
5000
Plug
HDF-ORING
O-RING
Part Number
Description
Packaging
Case Qty
HDF-04ORING
1/4" O-Ring
1000
5000
HDF-06ORING
3/8" O-Ring
1000
5000
HDF-08ORING
1/2” O-Ring
1000
5000
O-Ring
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
9
www.HydrofitQuickConnect.com
PT04
1/4" Tubing
Part Number
Description
Packaging
Case Qty
PT04-BK-0500
1/4" Polyethylene Tube - Black
1
2
PT04-BL-0500
1/4" Polyethylene Tube - Blue
1
2
PT04-GN-0500
1/4" Polyethylene Tube - Green
1
2
PT04-NA-0500
1/4" Polyethylene Tube - Natural
1
2
PT04-OG-0500
1/4" Polyethylene Tube - Orange
1
2
PT04-RD-0500
1/4" Polyethylene Tube - Red
1
2
PT04-WH-0500
1/4" Polyethylene Tube - White
1
2
PT04-YL-0500
1/4" Polyethylene Tube - Yellow
1
2
PT06
3/8" Tubing
10
3/8" Tubing (500 ft Rolls)
Part Number
Description
Packaging
Case Qty
PT06-BK-0500
3/8" Polyethylene Tube - Black
1
1
PT06-BL-0500
3/8" Polyethylene Tube - Blue
1
1
PT06-NA-0500
3/8" Polyethylene Tube - Natural
1
1
PT06-RD-0500
3/8" Polyethylene Tube - Red
1
1
PT06-WH-0500
3/8" Polyethylene Tube - White
1
1
PT08
1/2" Tubing
1/4" Tubing (500 ft Rolls)
1/2" Tubing (250 ft Rolls)
Part Number
Description
Packaging
Case Qty
PT08-BK-0250
1/2" Polyethylene Tube - Black
1
1
PT08-BL-0250
1/2" Polyethylene Tube - Blue
1
1
PT08-NA-0250
1/2" Polyethylene Tube - Natural
1
1
PT08-WH-0250
1/2" Polyethylene Tube - White
1
1
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
Technical
Specifications
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
Appendix
www.HydrofitQuickConnect.com
Chemical
Compatibility
TECHNICAL SPECIFICATIONS
HYDROFIT™ - Quick Connect
Fittings can be used on
liquids other than potable
water. We recommend
that you consult with our
Chemical Compatibility
Chart to determine if they
can be utilized under your
specifications. You may also
contact us to further verify compatibility.
HYDROFIT™ - Quick Connect Fittings are made of the
following components:
Food Quality
HYDROFIT™ - Quick Connect
Fittings are suitable for food and water use. They are manufactured using FDA approved materials and are certified by NSF to NSF/ANSI
standards 61.
Maximum Torque
Values
Threads
Max. Torque
1/4"
1.0 ft/lb (1.5 Nm)
3/8"
2.2 ft/lb (3.0 Nm)
1/2"
2.2 ft/lb (3.0 Nm)
Responsibility of Use/
Warranty
Hydrofit™ warrants its
products against defects in
manufacturing or materials.
Hydrofit™ - Quick Connect
Fittings are warranted
for water use only unless
specified, in writing, by
Hydrofit™. It is the
responsibility of the installer/
user to ensure that the
installation is made correctly,
leak free and that it is adequately maintained.
Materials of Construction
Body FDA POM (Polyacetal, Polyoxy Methylene)
O-Ring
Collet
Nitrile (NBR)
Polyoxy Methylene & SS Teeth
Fittings Working Pressure & Temperature Range
150 PSI (10 BAR) @ 70°F (20°C)
Max Max 60 PSI (4 BAR) @ 140°F (60°C)
Min 33°F (1°C)
Tubing Working Pressure & Temperature Range
1/4" & 3/8" - 230 PSI @ 70°F (15 BAR @ 20°C)
Max 120 PSI @ 150°F (8 BAR @ 65°C)
1/2"
- 150 PSI @ 70°F (10 BAR @ 20°C)
Max 90 PSI @ 150°F (6 BAR @ 65°C)
Side Loads
HYDROFIT™ Fittings Should not be exposed to excessive
side loads. They should not be used to support brackets
or other components and extreme caution should be
taken during shipping and transportation to prevent
undue stress and excessive side loading.
Plastic Tubing - Polyethylene, Nylon that conforms
to the specifications listed under tube tolerances.
Braided Hose - Barbs must be utilized with clamps
and must incorporate Tube to Hose Stems
Suitability
It is the customers responsibility to gauge and ensure
that HYDROFIT™ Fittings and Tubing are suitable for
their specific application and variable parameters.
All HYDROFIT™ Fittings and Tubing should be installed
in accordance to the recommended guidelines
and specifications.
Metal Tubing - Copper, Brass and Mild Steel that
conforms to the tolerances listed under Tube
Tolerances.
Metal Tubing (Hard) - HYDROFIT™ - Quick Connect
Fittings are not designed for Hard Metal Tubing.
Inside Diameter
1/4"
0.160"
3/8"
0.250"
1/2"
0.37"
Potable Water Applications
HYDROFIT™ Tubing is suitable for potable water
applications with a maximum chlorine content of
4ppm (parts per million). Water heated above 70°F
(20°C) and/or pressure above the rated maximum
pressures will significantly reduce the service life.
Avoid direct exposure to sunlight. Direct exposure
to sunlight will also reduce its service life and may
Responsibility of Use
While HYDROFIT™ gives a warranty against defects in
manufacture and materials, it is the responsibility of the
user/installer to ensure that all fittings and tubing are
suitable for their application. The installation must be
carried out correctly and comply with recognized codes
and national standards. All connections must be properly
maintained. Please refer to Terms and Conditions.
Installation and System Testing
Fittings and tubing installations should be pressure
tested and each connection inspected by pushing and
pulling on the connection points prior to handing over
to final user.
INCH SPECIFICATIONS CHART
OD (inch)
Appendix | i
Food Quality
HYDROFIT™ Fittings and Tubing are produced with Food
and Drug Administration (FDA CFR 21 177.2470 and
177.2600) approved material and can be used in food
quality applications.
Tubing Use
Depending on the type of tube used, HYDROFIT™ Quick Connect Fittings may be used at higher
pressures and temperatures.
Outside Diameter
lead to failure. It is commonly known and good practice
to inspect tubing and fittings regularly. Should there
be evidence of damage, color change, cracking or
hardening, fittings and tubing should be replaced
immediately. All fitting and tubing should not be used
near heat emitting appliances. Note: Hot and Cold water
plumbing systems MUST comply with local plumbing
code for pipe and fittings. Frequent visual inspections
are advisable. Frequency should be predicated on the
severity of the application, risk of failure or when failure
could result in unacceptable downtime, damage or
injury risk. Keep away from contact with ANY chemicals
or aggressive liquids.
Wall Thickness (inch)
D
Tolerance
e
Tolerance
Max. Ovality
(inch)
Min. Bend Radius
@ +20°C (mm)
1/4"
± 0.0004
0.047
± 0.0004
± 0.008
3/8"
± 0.0004
0.063
± 0.0004
± 0.009
1/2"
± 0.0004
0.063
± 0.0004
± 0.01
2.5"
Max. Working Pressure (bar)
-15°C to
+20°C
+40°C
+65°C
1"
16
12
10
1.25"
13
12
7
11
9
7
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
HYDROFIT™ - Quick Connect Fittings
Tubing
Collet
O-Ring
HYDROFIT™ Fitting
Installation Instructions
RECOMMENDED
MAINTENANCE
It is recommended
that installations are
inspected a minimum of
once per year and parts
replaced as needed.
Step 1. Cut the Tubing
Cut the tube cleanly and squarely. Ensure that the tube
has a smooth outside diameter without any burrs,
chamfers or score marks prior to inserting it into the
fitting. Tubing that has not been cut properly can cause
drips and leaks.
USE LOCKING
CLIPS
Step 2. Insert Tubing
Push the tubing through the collet and o-rings until it
bottoms out against the tube stop. The collet holds the
tube in place and the o-ring provides a leak resistant
seal. If you need to remove the tubing always re-cut
before connecting tubing again. Scores on tubing can
cause failure.
To ensure that
connections don't
release accidentally
we recommend you
use locking clips on
all connections.
Step 3. Inspect and Test
Push and pull the tubing toward and away from the
fitting to ensure that it has been installed properly. Test
and inspect the installation for any leaks.
Tube cutter
Tube Removal
Relieve pressure from the tubing and fitting. Push the
collet flange against the fitting body while pulling the
tubing away from the fitting to release it.
CHEMICAL COMPATIBILITY CHART
CHEMICAL
COMPATIBILITY
CHEMICAL
Acetic Acid
Acetone
Air
Ammonia - Cold Gas
Ammonium Carbonate
Ammonium Chloride
Ammonium Nitrate
Ammonium Sulfate 10% pH 5.8
Amyl Alcohol
Aniline
Beer
Benzaldehyde
Borax
Boric Acid
Bromine Water
Butane
Butter
Butyl Acetate
Calcium Chloride
Calcium Hypochlorite
Carbon Tetrachloride
Chlorine - Dry
Chlorine - Wet
Chloroform
Chromic Acid 3%
Citric Acid 10%
Coke Oven Gas
Cottonseed Oil
Creosote
Cyclohexanol
Cyclohexanone
Detergent Solution
Dimethylformamide
Ethyl Acetate
Ethyl Alcohol 50%
Ethyl Alcohol 95%
Formaldehyde 40%
Formic Acid 10%
Glucose
Glycerin
Hydrobric Acid
Good
Good
Good
Good
Good
Good
Good
Good
Satisfactory
Satisfactory
Good
Good
Good
Good
Unsuitable
Unsuitable
Good
Satisfactory
Good
Good
Unsuitable
Unsuitable
Unsuitable
Unsuitable
Unsuitable
Satisfactory
Unsuitable
Unsuitable
Satisfactory
Satisfactory
Good
Good
Satisfactory
Satisfactory
Good
Good
Satisfactory
Good
Good
Good
Good
Hydrofluoric Acid - Dilute
Hydrogen Peroxide 3%
Hydrogen Sulfide
Lactic Acid 20%
Linseed Oil
Maleic Acid
Mercury
Methyl Chloride
Milk
Natural Gas
Nickel Salts
Nitric Acid 10%
Nitric Acid - Concentrated
Olive Oil
Oxalic Acid
Petrol
Phosphoric Acid 20-25%
Phosphoric Acid - Concentrated
Potable Water
Potassium Hydroxide 50%
Propane
Pyridine
Salt Water
Soap Solution
Sodium Carbonate 10%
Sodium Chloride 10%
Sodium Hydroxide (Caustic Soda Solution)
Sodium Hypochlorite (12.5% Active Chlorine)
Sodium Nitrite 10% pH 8.8
Stearic Acid
Sulfur
Sulfur Chloride
Sulfur Dioxide Gas
Sufuric Acid - Concentrate
Tar
Tartaric Acid
Toluene
Trichloroethane
Vegetable Oil
Vinegar
Zinc Salts
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
COMPATIBILITY
Good
Satisfactory
Good
Good
Good
Unsuitable
Good
Unsuitable
Good
Unsuitable
Good
Satisfactory
Unsuitable
Satisfactory
Good
Unsuitable
Good
Satisfactory
Good
Good
Unsuitable
Satisfactory
Good
Good
Good
Good
Good
Satisfactory
Good
Satisfactory
Good
Unsuitable
Good
Unsuitable
Unsuitable
Satisfactory
Unsuitable
Unsuitable
Satisfactory
Good
Good
For clean, square,
chamfer, and burr free
cuts always use a
HYDROFIT™ Tube Cutter.
Never use scissors or
other non approved
cutting devices. Use of
these could result
in failure and damage.
Certified to NSF /ANSI
Standard 61
Appendix | ii
www.HydrofitQuickConnect.com
TERMS AND CONDITIONS
The products described in this document are hereby offered for sale to be established by Hydrofit Quick Connect Fittings, Polaris Scientific
Ultraviolet, Hydron Membranes, Aquatrol, Shok Blok, HydroGuard, Hydronix Water Technology, any of its subsidiaries and its authorized
distributors. This offer and its acceptance by any customer (the "Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s
order for any item described in this document, when communicated to Hydrofit Quick Connect Fittings, Polaris Scientific Ultraviolet, Hydron
Membranes, Aquatrol, Shok Blok, HydroGuard, Hydronix Water Technology, its subsidiaries or an authorized distributor (the "Seller") verbally or in
writing, shall constitute acceptance of this offer. Provided, however, that these terms and conditions shall not operate as a rejection of the Buyer’s
offer unless such offer contains variances in the description, quantity, price, or delivery schedule of the items.
1. Terms and Conditions of Sale.
All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of the Seller’s products are subject to and shall be
governed exclusively by the terms and conditions stated herein (the "Agreement"). The Buyer’s acceptance of any offer to sell is limited to the
terms and conditions in the Agreement. Any terms or conditions in addition to or inconsistent with those stated in the Agreement, proposed by
the Buyer in any acceptance of an offer by the Seller, are hereby rejected. No such additional, different or inconsistent terms and conditions shall
become part of the agreement between the Buyer and the Seller unless expressly accepted in writing by the Seller. The Seller’s acceptance of any
offer to purchase by the Buyer is expressly conditioned upon the Buyer’s assent to all the terms and conditions in this Agreement, irrespective of
any terms in addition to, or inconsistent with those contained in the Buyer’s offer. Acceptance of the Seller’s products shall in all events constitute
such assent.
2. Documents.
Unless provided otherwise in the Agreement, all catalog descriptions, illustrations, drawings and literature or independently submitted estimates
of performance, weights and measurements or other specifications provided by the Seller are mere approximations and the Seller reserves the
right to alter or amend them at any time. The Seller reserves the right to correct clerical or technical errors in the contract documents. The Buyer
shall furnish with his order all necessary specifications and information. The Seller takes no responsibility for goods manufactured, priced or
delivered not in accordance with the order or the specifications unless the Buyer’s order and specifications are clear and correct.
3. Prices.
Unless otherwise provided, all prices contained in our quotations and written acceptances are ex-works and do not include the cost of packing. All
orders are accepted on the condition that all such prices are subject to revision by the Seller at any time before the goods are dispatched to take
account of any price change. In the event that the Buyer does not place the entire order quoted by the Seller for the Buyer, the Seller reserves the
right to revise its prices. The Seller also reserves the right to revise its prices if the Buyer modifies the specification or quantity of the goods or the
delivery requirements after the order has been accepted by the Seller.
4. Advice.
All advice given in connection with the Seller’s goods is provided without charge to the Buyer. ANY ADVICE AND ASSISTANCE GIVEN BY THE SELLER
TO THE BUYER IS GIVEN AT THE BUYER’S RISK, AND THE SELLER SHALL NOT BE LIABLE FOR ANY LOSS, DAMAGE OR CLAIM ARISING THEREFROM.
5. Payment.
(a) Unless otherwise provided in the Agreement, or explicitly agreed upon in writing by the Seller, payment is due in full 30 days from date
of shipment of the items purchased herein under. (b) In the case of an installment contract, deliveries or parts, payment for each installment
delivery or part shall be made under sub-clause (a) as if the same constituted a separate agreement. (c) Amounts not timely paid shall bear
interest at the rate of 2-1/2% above the Seller’s bank’s prime rate from time to time in force. (d) In the event that the Buyer fails within one
calendar month of the date for payment to effect any payment which may be due under the Agreement or any agreement with the Seller, or
if the Buyer commits any breach of the Agreement, or if the Buyer becomes insolvent or commits any act of bankruptcy or contemplation of
liquidation, the Seller will be entitled, without prejudice to the Seller’s other rights, to terminate the Agreement or any unfulfilled part thereof,
or at the Seller’s option to make partial deliveries.
6. Modifications and Cancellations.
This Agreement is not subject to oral modification or cancellation. A Buyer’s request for modification or cancellation will not be incorporated
into the Agreement unless the request is accepted by the Seller in a writing that amends the Agreement. Acceptance of any such requested
modification or cancellation shall be at the Seller’s discretion and shall be upon such terms and conditions as the Seller may require.
7. Handling Charge.
Goods supplied in accordance with the Buyer’s order may later be returned to the Seller at the Seller’s discretion provided the return is preauthorized in writing, and the merchandise is unused, in original packages, unaltered, clean and no older than 60 days from the date of shipment
by the Seller. The Buyer will be required to pay to the Seller a handling charge of 25% of the purchase price of the returned goods. A copy of the
original invoice for the merchandise must accompany all returns.
8. Delivery.
(a) Any delivery dates quoted are approximate only and the Seller shall have no liability for any delays in delivery. (b) Unless provided otherwise,
delivery of the goods shall be made when the Seller has notified the Buyer that the goods are ready for dispatch. Regardless of the method of
delivery, delivery shall be made F.O.B. Seller’s plant, where the risk of loss shall thereupon pass to the Buyer upon the Seller’s delivery to a carrier.
Notwithstanding that the Seller’s prices are ex-works, the Seller is prepared by special contract to procure carriage or freight and insurance on
behalf of the Buyer and at Buyer’s cost in which event the Seller shall be under no liability for damage in transit or loss or damage to the goods
beyond the point at which the Seller contracts to deliver the same. (c) The Seller will not make drop shipments.
9. Inspection and Rejection.
(a) The following provisions shall apply in relation to all deliveries of goods: the Seller shall not be held liable for any claims of damage in transit,
shortage of delivery or loss of goods, unless in the case of shortage of delivery, a separate notice in writing is given to the carrier concerned and
to the Seller within three (3) days of the receipt of the goods, followed by a complete claim in writing within five (5) days of receipt of the goods
and in the case of loss of goods, a separate notice in writing is given to the carrier concerned and to the Seller and a complete claim in writing
made within thirty (30) days of the date of consignment. The Buyer must inspect the goods on arrival from the carrier; however, where goods
are accepted from the carrier concerned without being inspected, the delivery book of the carrier concerned must be signed "not examined".
The Seller shall have the right to inspect the goods at the Buyer’s premises in respect to any such claims made by the Buyer and the Buyer shall
retain such goods until the Seller has inspected such goods or until the Seller has notified the Buyer that the Seller does not wish to inspect such
goods. Any breach of these conditions in this provision shall serve as a waiver to any claim brought by the buyer. (b) Without prejudice to the
Seller’s other rights, should the Buyer fail for any reason to send the Seller forwarding instructions within ninety (90) days after the date of the
Seller’s notification that the goods are ready for dispatch or to accept delivery of the goods, the Seller shall be entitled at the Buyer’s risk and
expense to store the goods and/or to procure or effect storage of the goods elsewhere. Goods so stored shall be paid for as if they had been
dispatched and/or accepted.
10. Special Tooling.
Where it is necessary for the Seller to manufacture or to purchase special tooling, including without limitation tools, dies, jigs, mandrills, fixtures,
molds, and patterns, in order to execute a contract, the Buyer will be charged with all or a proportion of the cost of such special tools. Such special
tooling shall be and remain the Seller’s property notwithstanding payment of any charges made by the Buyer. In no event will the Buyer acquire
any interest in apparatus belonging to the Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been
specially converted or adopted for such manufacture and notwithstanding any charges paid by the Buyer therefore. Unless otherwise agreed,
the Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.
11. Test and Performance.
(a) The Seller’s goods are, where practicable, submitted to the Seller’s standard test before delivery. If special tests are required, these shall be
made at the Seller’s premises unless otherwise agreed, and will be subject to an extra charge. (b) The Seller accepts no liability for failure to attain
any performance figures quoted by the Seller unless the Seller specifically has guaranteed them with an agreed sum as liquidation damages and
the Buyer has suffered actual loss by reason of the failure to attain the figures quoted. (c) Any particulars of weights and measurements, power
and consumption, power output or performance relating to the goods and like matters furnished by the Seller to the Buyer in the Seller’s catalogs,
literature or otherwise, are approximate and are intended only to present a general idea of the goods to be supplied and unless previously agreed
specifically in writing shall not form part of the Agreement.
12. Buyer’s Property.
Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished to the Seller by the Buyer, or any other items
which become the Buyer’s property, may be considered obsolete and may be destroyed by the Seller after two (2) consecutive years have elapsed
without the Buyer placing an order for the items which are manufactured using such property. The Seller shall not be responsible for any loss or
damage to such property while it is in the Seller’s possession or control.
13. Taxes.
Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed
by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by the Seller, or if the
Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the item sold. The Buyer agrees to pay all
such taxes or to reimburse the Seller therefore upon receipt of its invoice. If the Buyer claims exemption from any sales, use or other tax imposed
Appendix | iii
by any taxing authority, the Buyer shall promptly indemnify and hold the Seller harmless from and against any such tax, as well as any interest or
penalties thereon which may be assessed if the items are held to be taxable.
14. Warranty.
EXCEPT AS EXPRESSLY WARRANTED IN WRITING BY THE SELLER, THE GOODS SOLD BY THE SELLER ARE PURCHASED BY THE BUYER “AS IS.” THE
SELLER DOES NOT WARRANT THAT THE GOODS ARE OF MERCHANTABLE QUALITY OR THAT THEY CAN BE USED FOR ANY PARTICULAR PURPOSE.
EXCEPT AS EXPRESSLY WARRANTED IN WRITING BY THE SELLER, THE SELLER MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND WITH
RESPECT TO THE PRODUCTS.
(a) The Seller warrants that the items sold hereunder shall be free from defects in material or workmanship at the time of shipment by the Seller.
The Seller warrants that if within 12 months of delivery of the goods to the Buyer the Buyer returns immediately to the Seller’s premises any of
the said goods which the Buyer believes to be defective, carrier paid, properly packed and clearly marked with the Buyer’s full name and address
and any other information such as serial numbers which may be necessary to enable the goods to be identified, together with a complete
description of the alleged defect, they will be repaired or new goods will be supplied in exchange and the goods so repaired or such new goods
will be delivered to the Buyer free of charge at the Seller’s premises; provided, however, that the foregoing warranty shall be applicable only if
upon demand by the Seller, the Buyer proves to the Seller’s satisfaction: (i) that the defect was due solely to defective workmanship; (ii) that no
alterations or repairs have been made to the goods except with the Seller’s written consent; (iii) that the defect was not caused by any act of
the Buyer or its agents; and (iv) that the defect was not caused by any matter beyond the reasonable control of the Seller, including, without
limitation, accident or normal wear and tear. (b) THIS WARRANTY DOES NOT APPLY UNLESS THE SELLER’S PRODUCTS ARE: (I) USED IN DOMESTIC
PLUMBING APPLICATIONS; (II) INSTALLED BY A LICENSED CONTRACTOR, PLUMBER OR QUALIFIED EQUIPMENT INSTALLATION PROFESSIONAL; AND
(III) INSTALLED AND OPERATED IN ACCORDANCE WITH PUBLISHED HYDROFIT / HYDRONIX WATER TECHNOLOGY SPECIFICATIONS. (c) All costs and
expenses, including freight charges, customs duties, and insurance incurred in returning the goods to the Seller’s premises in accordance with
this provision shall be paid by the Buyer. The benefit of this warranty shall not be assignable by the Buyer. (d) THIS WARRANTY DOES NOT EXTEND
TO ANY GOODS NOT MANUFACTURED BY THE SELLER EVEN THOUGH SUPPLIED BY THE SELLER NOR DOES IT EXTEND TO ANY SECOND-HAND OR
RECONDITIONED GOODS NOR DOES IT EXTEND TO COMPONENTS MANUFACTURED BY THE SELLER BUT INSTALLED, ATTACHED OR WELDED BY THE
BUYER OR HIS CUSTOMER ON EQUIPMENT NOT MANUFACTURED BY THE SELLER. GOODS NOT MANUFACTURED BY THE SELLER CARRY ONLY THE
WARRANTY (IF ANY) OF THEIR MAKERS AND THE BUYER IS ENTITLED TO THE BENEFIT THEREOF ONLY SO FAR AS THE SELLER HAS THE POWER
TO TRANSFER IT. (E) THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER; THE SELLER
MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT
LIMITED TO MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESSED OR IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE,
OR COURSE OF DEALING, ARE HEREBY DISCLAIMED. (f) NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS
BUILT OR ACQUIRED WHOLLY OR PARTIALLY TO THE BUYER’S DESIGNS OR SPECIFICATIONS.
15. Limited Remedy.
THE SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS AGREEMENT SHALL BE LIMITED EXCLUSIVELY
TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD. IN NO EVENT SHALL THE SELLER BE LIABLE TO THE BUYER OR ANY THIRD PARTY FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS
ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ANY ITEMS SOLD, WHETHER ALLEGED TO ARISE FROM BREACH OF
CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY.
IN NO EVENT SHALL THE SELLER BE LIABLE TO THE BUYER OR ANY OTHER ENTITY FOR MORE THAN THE INVOICE PRICE RECEIVED BY THE SELLER FOR
ANY NON-CONFORMING PRODUCTS. THE SELLER SHALL NOT BE LIABLE TO THE BUYER OR ANY OTHER ENTITY FOR PERSONAL INJURY, PROPERTY
DAMAGE, OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, SPECIAL, OR OTHER DAMAGES OF ANY KIND,
INCLUDING WITHOUT LIMITATION THE COST OF PROCUREMENT OF SUBSTITUTE GOODS, THE LOSS OF PROFITS, PRODUCTS, OR PRODUCTION, OR
THE INTERRUPTION OF BUSINESS, HOWEVER CAUSED. THE SELLER SHALL NOT BE LIABLE TO THE BUYER OR ANY OTHER ENTITY ON ANY THEORY OF
LIABILITY INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT OR EXPRESS OR IMPLIED WARRANTY, TORT, NEGLIGENCE, FAILURE TO WARN,
OR STRICT LIABILITY, AND WHETHER OR NOT THE SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ESSENTIAL PURPOSE
OF THIS PROVISION IS TO LIMIT THE LIABILITY OF THE SELLER ARISING OUT OF THE SALE OF PRODUCTS TO THE BUYER WHETHER FOR BREACH OF
CONTRACT, NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL
PURPOSE OF ANY LIMITED REMEDY AND NOTWITHSTANDING THE PROVISIONS OF ANY OTHER AGREEMENT BETWEEN THE SELLER AND THE BUYER.
16. Indemnity for Infringement of Intellectual Property Rights.
(a) The Buyer shall defend and indemnify the Seller against all actions, claims, demands, penalties and costs by third parties in tort, or for
infringement, or alleged infringement, of patents, trademarks, copyrights, trade dress, trade secret or other rights of any third party resulting
from the goods manufactured in accordance with the Buyer’s specifications or based on any information provided by the Buyer. The Buyer will
defend any action against the Seller for title, patent, trademark, copyright infringement, or other claimed by a third party at the Buyer’s sole
cost and expense. (b) The Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or
similar rights except as provided in this provision. The Seller will defend and indemnify the Buyer against allegations of infringement of patents,
trademarks, copyrights, trade dress and trade secrets ("Intellectual Property Rights"). The Seller will defend at its expense and will pay the cost
of any settlement or damages awarded in an action brought against the Buyer based on an allegation that an item sold pursuant to this contract
infringes the Intellectual Property Rights of a third party. The Seller’s obligation to defend and indemnify the Buyer is contingent on the Buyer
notifying the Seller within 10 days after sole control over the defense of any allegations or actions, including all negotiations for settlement or
compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, the Seller may, at its
sole expense and option, procure for the Buyer the right to continue using said item, replace or modify said item so as to make it non-infringing,
or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing,
the Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for
which the designs are specified in combination or use in a system of any item sold hereunder. The foregoing in this provision shall constitute the
Seller’s sole and exclusive liability and the Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights.
17. Lien.
In addition to any right of lien to which the Seller may by law be entitled, the Seller shall have a general lien on all goods of the Buyer in the Seller’s
possession (although such goods or some of them may have been paid for) for the unpaid price of any other goods sold and delivered to the Buyer
by the Seller under the same or other contracts.
18. Waiver.
The Seller’s rights shall not be affected or restricted by any indulgence or forbearance granted to the Buyer. No waiver by the Seller of any breach
shall operate as a waiver of any later breach.
19. Force Majeure.
The Seller shall be excused from performing any of its obligations under this Agreement which are prevented or delayed by any occurrence
not within the reasonable control of the Seller, including but not limited to, accidents, acts of God, destruction or damage to the goods or the
Seller’s manufacturing plant, delays or failures in delivery of carriers or suppliers, shortages of materials, strikes or other labor matters, floods,
earthquakes, fire, riots, explosions, or any regulations, rules, ordinances or orders of any governmental authority, federal, state or local, whether
such cause exists at the date of the order or not.
20. Buyer’s Representation of Solvency.
The Buyer hereby represents that as of the signing of this Agreement it was not insolvent within the meaning of the Uniform Commercial Code
or any Bankruptcy Laws.
21. Assignment and Delegation.
The rights and obligations of the parties under this Agreement may not be assigned or delegated, except on the express written consent of the
other party to the assignment or delegation.
22. Integration.
The rights and obligations of the parties and the terms and conditions set forth herein, together with any amendments, modifications and any
different terms and conditions expressly accepted by the Seller in writing, shall constitute a complete and exclusive statement of the terms of this
Agreement. This Agreement supersedes not only all prior agreements, but also oral agreements made contemporaneously with the execution of
this Agreement. All such materials may not be used to supplement, explain, or contradict the terms of this Agreement.
23. Severability.
If any of these conditions or any part thereof purports to exclude or restrict or limit any liability and such exclusion or restriction or limitation is
prohibited or rendered void or unenforceable by any legislation to which it is subject, or is itself prohibited or rendered void or unenforceable by
any legislation to which it is subject, then the exclusion, restriction or limitation on the condition or part thereof in question shall be so prohibited
or rendered void or unenforceable and the validity or enforceability of any other part of these provisions shall not thereby be affected.
24. Governing Law/Limitation on Actions.
The terms, conditions, rights, and obligations under this Agreement shall be construed under the laws of the State of California, without regard to
principles of conflicts of laws. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by the Buyer more
than two (2) years after such cause of action accrues.
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
www.HydrofitQuickConnect.com
NOTES
Hydrofit™ Quick Connect | P.O. Box 2235 Chino Hills, CA 91709, USA
iv | Appendix
P.O. Box 2235 Chino Hills, CA 91709
www.HydrofitQuickConnect.com
©2014 Hydrofit™ Quick Connect. All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement