Catalogue Sheet: RA Series

Catalogue Sheet: RA Series
Type:
new product
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® RA Series pictogram Exit Signs. The equipment shall operate with universal
2-wire AC input voltage of 120 to 347VAC at less than 2.5W and universal 2-wire DC input voltage from 6 to 24VDC
at less than 1.5W for single and double face signs. The equipment shall be suitable for wall, end, or ceiling mount.
The housing shall be constructed of rugged extruded aluminum and have a maximum depth of 2-1/2”. The
faceplate(s) shall be constructed of extruded aluminum and shall incorporate a protective clear polycarbonate
panel. Each face plate shall come standard with two legend films for pictogram and direction selection. The light
source shall be white light-emitting diodes (LED) and shall provide even illumination in normal and emergency
operation. The pictogram Exit Sign in a Self-powered configuration shall use a sealed Nickel-Cadmium battery of
2.4V nominal voltage and shall stay illuminated during emergency operation for at least two hours upon AC failure.
The pictogram Exit Sign shall meet CSA 22.2 No.141-10.
The equipment shall be Ready-Lite® Model:
.
RA SERIES
Extruded Aluminum Pictogram
Exit Sign
FEATURES
WIRE GUARDS
460.0079-RL
wall mount
460.0027-RL
end mount
460.0028-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
PICTOGRAM
STRAIGHT FROM HERE
7-3/4” [19.7 cm]
6-3/8” [16.2 cm]
< PICTOGRAM
LEFT FROM HERE
8-3/4” [22.3 cm]
4-3/4” [11.9 cm]
13-1/8” [33.3 cm]
2-1/2” [6.3 cm]
14-1/8” [35.9 cm]
PICTOGRAM >
RIGHT FROM HERE
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
less than 2.5W
-
-
AC/DC standard
120 to 347VAC
less than 2.5W
6 to 24VDC
less than 1.5W
AC/Special DC
120 to 347VAC
less than 2.5W
36, 48, 120VDC
less than 2.5W
two-wire 120V AC/DC
120VAC
less than 2.5W
120VDC
less than 2.5W
self-powered
120 to 347VAC
less than 3W
nickel-cadmium battery
minimum two hours
• D
urable extruded, one-piece
aluminum housing and face plates
• White LED light source
• Supplied standard with two pictogram
films (single face universal mount and/
or single/double face universal mount)
for direction selection
• Meets or exceeds CSA 22.2 No.14110 standard for pictogram exit signs
• Universal AC input: two-wire 120 to
347VAC; standard DC input: two-wire
6 to 24VDC
• Energy efficient – consumes less than
2.5W in AC or DC-remote mode
• Self-powered model gives standard
two hours of back-up lighting
• Universal mounting – end, wall or
ceiling
• Easy access to wiring entry for all
mounting options
• Comes standard with the Ready-Lite®
EZ2 canopy for quick and easy
installation
ORDERING INFORMATION
SERIES
FACES / MOUNTING
RA= pictogram
exit sign
1= single face, universal
mount
2= double face,
universal mount
3= universal face,
universal mounting
HOUSING COLOUR
A= brushed aluminum
B= black
G= grey
W= factory white
Other colours available
VOLTAGE
OPTIONS
U= 120 to 347VAC; 6 to 24VDC
SP= self-powered, 120 to 347VAC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wires 120VAC/VDC
SPD= self-powered diagnostic NiCad, 120/347VAC
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system interface*
TP= tamper-proof screws*
VR= vandal-resistant shield and tamper-proof
screws*
*Not all options available with NEXUS® System. Please consult
your sales representative
*Option VR not available on universal face
EXAMPLE: RA1WUTP
31
*990.0119-RL= Tamper-proof bit (sold separately)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement