Craftsman | 315.115122 | Operator`s manual | Craftsman 315.115122 Operator`s manual

RATOR'S MANUAL
19,2 VOLT NAILER/STAPLER
Model No.
315.115122
_
BATTERIES AND CHARGERS
SOLD SEPARATELY
WARNtNG:
To reduce the risk of injury,
the user must read and understand the
operator's manual before using this
product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly Rd., Hoffman
Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-713
6-05
Save this manual
for future
reference
•
Warranty ..........................................................................................................................................................................
2
•
Introduction .....................................................................................................................................................................
2
•
General Safety Rules ....................................................................................................................................................
•
Specific Safety Rules .......................................................................................................................................................
4
•
Safety Rules for Charger .................................................................................................................................................
5
•
Symbols ........................................................................................................................................................................
•
Features ...........................................................................................................................................................................
8
•
Assembly .........................................................................................................................................................................
9
•
Operation ....................................................................................................................................................................
•
Maintenance ..................................................................................................................................................................
13
•
Exploded View and Parts List ........................................................................................................................................
14
•
Parts Ordering/Service
....................................................................................................................................
ONE YEAR FULL WARRANTY
ON CRAFTSMAN
3-4
6-7
9-13
Back Page
TOOL
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN (T TO THE
NEAREST SEARS STORE )N THE UN(TED STATES, and Sears will replace it, free of charge.
if this Craftsman tool is used for commercial
purchase.
or rental purposes, this warranty applies for only 90 days from the date of
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck
and Co., Dept. 817 WA, Hoffman
Estates, (L 60179
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
,_
WARNING!
[]
below, may result in electric shock, fire and/or serious
personal injury.
Do not overreach.
Keep proper footing and balance
at all times. Proper footing and balance enable better
control of the tool in unexpected situations.
[]
Use safety equipment.
Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
READ AND UNDERSTAND
ALL INSTRUCTIONS.
Failure to follow all instructions listed
SAVE THESE
WORK
INSTRUCTIONS
[]
AREA
[] Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
[] Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
[]
TOOL
USE AND
[]
Use
port
work
lead
clamps or other practical way to secure and supthe workpiece
to a stable platform. Holding the
by hand or against your body is unstable and may
to loss of control.
[]
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at
the rate for which it is designed.
Do not use tool if switch does not turn it on or off. A
[] Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to
lose control.
ELECTRICAL
SAFETY
[] A battery operated toom with integral batteries
or a
separate battery pack must be recharged
only with the
specified
charger for the battery. A charger that may
be suitable for one type of battery may create a risk of fire
when used with another battery.
[]
[]
Use battery operated tool only with specifically
ignated battery pack. Use of any other batteries
create a risk of fire.
[]
[]
Use battery
MODEL
315.115122
only with charger
BATTERY PACK
130279003
130279005
(item No. _911375)
desmay
[]
[] Remove adjusting keys or wrenches before turning
the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
with the switch is danger-
Disconnect
battery pack from tool or place the switch
in the locked or off position before making any adjustmerits, changing accessories,
or storing the tool. Such
preventive safety measures reduce the risk of starting the
tool accidentally.
Store idle tools out of reach of children and other
untrained
untrained
persons.
users.
Tools are dangerous
in the hands of
[]
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection
from one terminal to another. Shorting the
battery terminals together may cause sparks, burns, or a
fire.
[]
Maintain tools with care. Keep cutting tools sharp and
clean. Properly maintained tools with sharp cutting edges
are less likely to bind and are easier to control.
[]
Check for misalignment
or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool's operation,
if damaged,
have the tool
serviced before using. Many accidents are caused by
poorly maintained tools.
Use only accessories
that are recommended
by the
manufacturer
for your model. Accessories that may be
suitable for one tool may create a risk of injury when used
on another tool.
[] Do not abuse the cord. Never use the cord to carry the
charger. Keep cord away from heat, oil, sharp edges,
or moving parts. Replace damaged cords immediately.
Damaged cords may create a fire.
PERSONAL
SAFETY
[] Stay alert, watch what you are doing and use common
sense when operating a power tool Do not use tool
while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating
power tools may result in serious personal injury.
[] Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
[] Avoid accidentam starting. Be sure switch is in the
locked or off position before inserting battery pack.
Carrying tools with your finger on the switch or inserting
the battery pack into a tool with the switch on invites accidents.
CARE
tool that cannot be controlled
ous and must be repaired.
listed.
CHARGER
Model No. 1425301
(item No. _911041)
Model No. 315.115730
(item No. 140301003)
Do not use on a madder or unstable support.
Stable
footing on a solid surface enables better control of the
tool in unexpected situations.
[]
[]
Keep the tool and its handle dry, clean and free from
oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool. Following
this rule will reduce the risk of loss of control and deterioration of the enclosure
plastic.
SERVICE
[] Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel may result in a risk of injury,
[] When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of shock or injury.
[] Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring. Contact with a "live" wire will
also make exposed metal parts of the tool "live" and
[] Never use a battery that has been dropped or
received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged battery immediately.
shock the operator.
[] Know your power tool. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury,
[] Batteries vent hydrogen gas and can explode in
the presence of a source of ignition, such as a pilot
light. To reduce the risk of serious personal injury,
never use any cordless product in the presence of
open flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
[] Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses,
They are NOT safety glasses. Following this rule will
[] Do not charge battery tool in a damp or wet Iocation. Following this rule will reduce the risk of electric
shock.
reduce the risk of eye injury.
[] Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
[] For best results, your battery tool should be
charged in a location where the temperature
is
more than 50°F but less than 100°F. Do not store
outside or in vehicles.
when not using your battery tool or when changing
accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury,
[] Do not place battery tools or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury,
[] Under extreme usage or temperature condi=
tions, battery leakage may occur, if liquid comes
in contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar, if liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.
A
WARNNNG! READ AND UNDERSTAND ALL
INSTRUCTIONS. Failure to follow all instructions
listed below, may result in electric shock, fire
and/or serious personal injury.
[] Before using battery charger, read all instructions
and cautionary markings in this manual, on battery
charger, battery, and product using battery to prevent
misuse of the products and possible injury or damage.
a. That pins on plug of extension cord are the
same number, size and shape as those of
plug on charger.
b. That extension cord is properly wired and in
good electrical condition; and
c. That wire size is large enough for AC ampere
rating of charger as specified below:
Cord Length (Feet)
25'
50'
100'
CAUTION: To reduce the risk of electric shock or
Cord Size (AWG)
16
16
16
damage to the charger and battery, charge only
nickel-cadmium rechargeable batteries as specifically designated on your charger. Other types of
batteries may burst, causing personal injury or
damage.
NOTE: AWG = American Wire Gage
[] Do not use charger outdoors or expose to wet or
damp conditions. Water entering charger will increase
the risk of electric shock.
[] Use of an attachment not recommended
or sold
by the battery charger manufacturer may result in
a risk of fire, electric shock, or injury to persons.
Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
[] Do not abuse cord or charger. Never use the cord to
carry the charger. Do not pull the charger cord rather
than the plug when disconnecting from receptacle.
Damage to the cord or charger could occur and create
an electric shock hazard. Replace damaged cords immediately.
[] Make sure cord is located so that it will not be
stepped on, tripped over, come in contact with
sharp edges or moving parts or otherwise subjected to damage or stress. This will reduce the risk of
accidental falls, which could cause injury, and damage
to the cord, which could result in electric shock.
[] Keep cord and charger from heat to prevent damage to housing or internal parts.
[] Do not let gasoline, oils, petroleum-based products,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy plastic.
[] An extension cord should not be used unless ab-
[] Do not operate charger with a damaged cord or
plug, which could cause shorting and electric shock. If
damaged, have the charger replaced by an authorized
serviceman.
[] Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way. Take it to an authorized serviceman for electrical
check to determine if the charger is in good working
order.
[] Do not disassemble charger. Take it to an authorized
serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or
fire.
[] Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric shock,
[] Disconnect charger from the power supply when
not in use, This will reduce the risk of electric shock
or damage to the charger if metal items should fall into
the opening, it also will help prevent damage to the
charger during a power surge.
[] Risk of electric shock. Do not touch uninsulated
portion of output connector or uninsulated battery
terminal.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.
solutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock. If extension cord must be used, make sure:
_1_ WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities con-
tains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
5
Someof the followingsymbolsmaybe usedon this tool. Pleasestudythemand learntheirmeaning.Proper
interpretation
of thesesymbolswillallowyouto operatethe tool betterandsafer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
Minutes
Time
min
Alternating
Current
Type of current
Direct Current
Type or a characteristic
n o
No Load Speed
Rotational speed, at no load
[]
Class II Construction
Double-insulated
.../min
Per Minute
Revolutions,
@
Wet Conditions
Alert
Read The Operator's
O
A
@
@
@
®
of current
construction
strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
Manual
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Eye Protection
Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
Safety Alert
Precautions that involve your safety.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.
The following signal words and meanings are intended to explain the levels of risk associated with this
product.
SYMBOL
_lb
SIGNAL
MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION:
Indicates
a potentially
hazardous
result
in minor
or moderate
injury. situation, which, if not avoided, may
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician. For service we suggest you return the product to
your nearest AUTHORIZED SERVICE CENTER for
repair. When servicing, use only identical replacement
parts.
,_
WARNING:
To avoid serious personal injury, do not
attempt to use this product until you read thoroughly
and understand completely the operator's manual.
Save this operator's manual and review frequently for
continuing safe operation and instructing others who
may use this product.
WARNING:
O
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields, or a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always
use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Motor ...................................................................................................................................................................
Switch ........................................................................................................................................................
19.2 Volt DC
Single Shot Trigger
Staple Speed .....................................................................................................................................................
Staple Size .......................................................
40 shots/min.
3/8 in. Crown Width, 1/4 in., 5/16 in, 3/8 in, 1/2 in, 17/32 in, 9/16 in. length
Brad Size .....................................................................................................................
18 gauge, 3/4 in, 1 in, 1-1/4 in. length
Magazine Capacity .........................................................................................................................................
Charger Input .......................................................................................................................................
100 staple/brad
120 V, 60 Hz, AC only
Charge Rate .................................................................................................................................................................
1 Hour
HANDLE
SWITCH
TRIGGER
DEPTH ADJUS
KNOB
MAGAZINE
"ACTIVATION
FOOT
Fig.
KNOW YOUR CORDLESS
See Figure 1.
NAILER/STAPLER
Before attempting to use this product, familiarize yourself
with all operating Features and Safety Rules.
SWITCH
1
SAFETY INTERLOCK
The safety interlock prevents the nailer/stapler from
turning on accidentally. Push the activation foot of the
nailer/stapler down flush to the workpiece to disengage
the safety interlock.
TRIGGER
The switch trigger is conveniently located under the
handle. Pulling the switch trigger will drive one brad or
staple at a time.
DEPTH
ADJUSTMENT
KNOB
Use the depth adjustment knob to control the depth of the
brad or staple.
UNPACKING
Thisproducthasbeenshippedcompletelyassembled.
[] Carefully
removethetoolandaccessories
fromthe
box.Makesurethatallitemslistedinthepackinglist
areincluded.
[] Inspectthetoolcarefullyto makesurenobreakage
or
_I_
,_
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING
LIST
Nailer/Stapler
1 in. Brads (100 pcs.)
A
WARNING:
If any parts are missing do not operate
the tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
1/2 in. Staples (84 pcs.)
Operator's
,_
Manual
WARNING:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
LED FUNCTIONS
LED WILL
CHARGER
OF CHARGER
BE ON TO INDICATE STATUS
AND BATTERY PACK:
OF
[] Red LED on = Fast charging mode.
,_
WARNING:
Always wear safety goggles or safety
glasses with side shields when operating tools.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
,_
WARNING:
Do not use any attachments or acces-
sories not recommended by the manufacturer of
this tool. The use of attachments or accessories not
recommended
can result in serious personal injury.
APPLICATIONS
You may use this tool for the following purposes:
[] This nailer/stapler is designed for light-duty
nailing into wood.
stapling or
CAUTION:
If at any point during the charging
process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the
product. DO NOT insert another battery. Return the
charger and battery to your nearest service center
for service or replacement.
[] Green LED on = Fully charged and in maintenance
charge mode.
[] Green LED on = When battery pack is inserted into
charger, indicates hot battery pack or that battery pack
is out of normal temperature range.
[] Yellow and Green LEDs on = Deeply discharged or
defective battery pack.
[] No LED on = Defective charger or battery pack.
CHARGING
THE BATTERY
PACK
The battery pack for this tool has been shipped in a low
charge condition to prevent possible problems. Therefore,
you should charge it until the green LED on the front of the
charger comes on.
NOTE: Batteries will not reach full charge the first time
they are charged. Allow several cycles (operation followed
by recharging) for them to become fully charged.
CHARGINGA COOLBATTERYPACK
See Figure 2.
[] After normal usage, a minimum of 1 hour of charging
time is required to fully recharge battery pack.
If battery pack is below normal temperature range, the
green LED on charger will come on. Allow battery pack to
reach normal temperature, then the red LED will come on.
[] The battery pack will become slightly warm to the
touch while charging. This is normal and does not
indicate a problem.
[] Do not place the charger and battery pack in an area
of extreme heat or cold. They will work best at normal
room temperature.
NOTE: If the charger does not charge the battery pack
under normal circumstances, return both the battery pack
and charger to your nearest Sears Repair Center for
electrical check.
NOTE: The charger and battery pack should be placed
in a location where the temperature is more than 50°F
but less than 100°F.
[] Charge the battery pack only with the charger provided.
[] Make sure the power supply is normal household
voltage, 120 volts, 60 Hz, AC only.
[] When batteries become fully charged, unplug the
charger from power supply and remove the battery
pack.
[] Connect the charger to the power supply.
[] Place the battery pack in the charger aligning raised rib
on the battery pack with the groove in the charger.
BATTERYPACK
SHOWNIN CHARGER
[] Press down on the battery pack to be sure contacts on
the battery pack engage properly with contacts in the
charger.
[] Normally the red LED on charger will come on. This
indicates the charger is in fast charging mode.
[] Red LED should remain on for approximately 1 hour
then the green LED will come on. Green LED on
indicates battery pack is fully charged and charger is
in maintenance charge mode.
))
NOTE: The green LED will remain on until the battery
pack is removed from the charger or charger is
disconnected from the power supply.
RED LED
GREEN
LED
YELLOW
LED
[] If both yellow and green LEDs come on, this indicates
a deeply discharged or defective battery pack. Allow
the battery pack to remain in the charger for 15 to 30
minutes. When the battery pack reaches normal
voltage range, the red LED should come on. if the red
LED does not come on after 30 minutes, this may
indicate a defective battery pack and should be
replaced.
Fig. 2
10
CHARGINGA
HOT BATTERY
PACK
TO REMOVE
BATTERY
PACK
When using the tool continuously, the batteries in the
battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before
attempting to recharge. When the battery pack becomes
discharged and is hot, this will cause the green LED to
come on instead of the red LED. After 30 minutes, reinsert
the battery pack in the charger. If the green LED continues
to remain on, return battery pack to your nearest Sears
Repair Center for checking or replacing.
See Figure 3.
NOTE: This situation only occurs when continuous use of
the tool causes the batteries to become hot. It does not
occur under normal circumstances. Refer to "CHARGiNG A COOL BATTERY PACK" for normal recharging
of batteries. If the charger does not charge your battery
pack under normal circumstances, return both the battery
pack and charger to your nearest Sears Repair Center for
electrical check.
B Hold tool upside down, squeeze latch, and slide base
open.
TO INSTALL
BATTERY
!
Locate latches on side of battery pack and depress to
release battery pack from the tool.
B Remove battery pack from the tool.
LOADING THE TOOL WITH
See Figures 4 - 5.
STAPLES
B Remove battery pack from the tool.
B Place staples in channel, legs facing upward, and close
base.
B Make sure the latch is securely locked in place•
B Reattach battery pack to tool.
PACK
See Figure 3.
B Place battery pack in your tool. Align raised rib on
battery pack with groove inside tool.
B Make sure the latches on each side of the battery
pack snap in place and battery pack is secured in tool
before beginning operation.
CAUTION: When placing battery pack in the tool,
be sure raised rib on battery pack aligns with groove
inside tool and latches snap into place properly.
Improper assembly of battery pack can cause
damage to internal components.
LATCH
BATTERY
•PACK
Fig. 4
STAPLES
Fig. 5
11
_,
iNCREASE
FORCE
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
LOADNNG THE TOOL
DECREASE
FORCE
WNTH BRADS
See Figures 4 - 6.
[] Remove battery pack from the tool.
[] Hold tool upside down, squeeze latch, and slide base
open.
[] Place brads in the center of the channel with "T" head
Fig. 7
sitting on the slot base. Close base while making sure
brad strip stays upright in channel.
NANLING OR STAPLNNG
[] Make sure that the latch is securely locked in place.
See Figure 8.
[] Reattach battery pack to tool.
[] Hold handle firmly with magazine flat to workpiece
forming a 90 ° angle.
[] Press the activation foot of the nailer/stapler down
against the workpiece to disengage the safety
interlock. The activation foot must be depressed before
the switch trigger is depressed.
BRADS
[] Pull switch trigger to drive brad or staple.
[] Release the switch trigger and activation foot before
driving another brad or staple.
NOTE: You must release the activation foot and switch
trigger after each brad or staple to reset the tool.
The tool will not drive another brad or staple until the
activation foot and switch trigger are released.
Fig. 6
SETTING
DEPTH
See Figure 7.
[] Rotate the depth adjustment knob clockwise to use
more force for nailing or stapling.
[] Rotate depth adjustment knob counterclockwise
less force for nailing or stapling.
to use
[] Test on a scrap piece of the same material you are
using to achieve the desired results.
Fig. 8
NOTE: Harder materials will require more force to nail
or staple.
12
REMOVINGA JAMMED BRAD/STAPLE
B Removebatterypackfromthetool.
B Holdtoolupsidedown,squeezelatch,andslidebase
open.
B Removeunusedbrads/staples
frommagazine,
B Removejammedbrad/staple
withneedlenosepliers.
NOTE:Youmustremovejammedbrad/staplebefore
usingtoolanyfurther.If youtryto drivea brad/staple
whilethetoolisjammed,youcouldcausedamageto
themechanism.
,_
GENERAL
,_
WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.
WARNING"
Always wear safety goggles or safety
glasses with side shields when using compressed air
to clean tools. If the operation is dusty, also wear a
dust mask.
,_
WARNING:
_,
remove the battery pack from the tool when cleaning
or performing any maintenance.
Do not at any time let brake fluids,
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
BATTERY PACK REMOVAL AND
PREPARATION
FOR RECYCLING
BATTERIES
The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
To preserve natural resources, please
recycle or dispose of batteries
properly.
The batteries in this tool have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickelcadmium batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
To obtain the longest possible battery life, we suggest the
following:
A
[] Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
[] Store battery packs in a "discharged"
WARNING:
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which
may result in serious personal injury.
To avoid serious personal injury, always
[] Store the battery pack where the temperature
80°F.
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
is below
condition.
13
WARNING:
Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
CRAFTSMAN19.2 VOLT
CORDLESS
NAILER/STAPLER
- MODEL
NO. 315.115122
_._
_The model number will be found on a plate attached to the motor housing. Always mention the model
number in all correspondence regarding your 19.2 VOLT CORDLESS NAILER/STAPLER
or when
|
ordering repair parts.
SEE BACK
PAGE FOR PARTS ORDERING
INSTRUCTIONS
1
PARTS
Key
No.
1
LiST
Pad
Number
Description
102334001035
Cartridge Assembly ....................................................................................
1
983000-713
Operator's
1
* Can Be Purchased
Qty.
Manual ......................................................................................
Thru RSOS (Retail Special Order System)
J
14
Download PDF

advertising