Mark 70 Series Sliding Gate Control Valves Pneumatic Control

Mark 70 Series Sliding Gate Control Valves Pneumatic Control
3L/T-2R/S33 Series
CRN Registration Number Available
Sliding Gate Control Valves
The Mark 70 Series is a line of pneumatically-operated
diaphragm control valves that combine multiple spring
actuators with the precision of Jordan Valve's advanced sliding gate seat for closer control and greater
accuracy.
Jordan's unique sliding gate control valve trim teams
up with pressure, temperature pH, level, or flow controllers for fast response, long term reliability, and high
levels of accuracy on steam, gas, liquid and chemical
services.
Consisting of a modulating disc and stationary plate,
the sliding gate seat components are slotted with
multiple orifices that align to provide the precise flow
needed to maintain the process requirements. The
valve strokes in a fraction of the travel required by
conventional control valves for rapid correction of any
deviation from the process setpoint.
Pneumatic Control Valves
Mark 70 Series
This brochure includes the following Series:
•
•
MK70PG: a pump governor with its control port
connected to the pump discharge line. The valve
throttles to maintain a constant pump discharge
by controlling the steam flow to the pump.
•
MK701/702: for higher capacity requirements.
•
MK707: features an equal percentage flow
characteristic.
•
MK711: a linear control valve in sizes up to 6" with
Cv's to 395
•
MK74: controls fugitive emissions while reducing
the risks associated with toxic, corrosive, explosive and high temperature fluids
Features
•
Totally enclosed multi-spring actuator – minimizes deadband and is field reversible without
the use of special tools or additional parts
•
Compact design and simple construction –
allows fast, simple installation and easy
maintenance
•
Sliding gate seats provide:
—— Straight-through flow for reduced turbulence and quiet operation
—— Short stroke for fast response and accurate control
—— Easily interchangeable Cv's
—— Tight shutoff due to overlap of seat closure
area
•
Stem packing is four times deeper then stem
travel – for greater protection against leakage
Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Mark 70 Sliding Gate Control Valves
MK70: a line of pneumatically-operated diaphragm control valves that combine multiple
spring actuators with the precision of Jordan
Valve's advanced sliding gate for closer control
and greater metering accuracy
Mark 70 Sliding Gate Control Valves
Specifications
Sizes: (note: 1/4" & 3/8" sizes use 1/2" body with
reducers)
• Mark 70/70PG: 1/4" through 2" (DN8 through DN50)
• Mark 707: 1/2" through 6" (DN8 through DN150)
• Mark 711: 2-1/2" through 6" (DN65 through DN150)
Diaphragm: Buna-N (standard to 200°F/93°C)
End Connections
• Threaded (NPT, BSPT, BSPP – through 2" sizes/DN50)
• ANSI Flanges (150#, 300#)
• DIN Flanges (PN10/16, PN25/40)
Shutoff: ANSI Class IV
Body Materials
• Ductile Iron
• Bronze (1/2" – 2"/DN15 - DN50)
• Carbon Steel (WCB)
• Stainless Steel (CF8M)
Trim Materials
• 303SS for CI and DI body valves
• 316SS for SS body valves
Seat Materials
• Jorcote on SST – standard
Yoke Material: Cast Iron
Actuator: Steel
Stem Packing: spring-loaded Teflon (to 450°F/232°C);
Graphite (to 1200°F/649°C)
Service: Steam, water, oil, gas, air and chemicals
Ranges
• Mark 70/707/711: 3-15, 3-9, 9-15, 6-30 psi
(0,21-1,03; 0,21-0,62; 0,62-1,03; 0,41-2,07 bar)
• Mark 70PG: consult factory for ranges
Action
• Direct (air signal closes valve)
• Reverse (air signal opens valve)
Positioner: side or top-mounted positioners are available to overcome the normal hysteresis for a control
valve and actuator, and to ensure that the valve stem
position is always directly proportional to the control
valve command signal. See the Positioner section for
more details.
Rangeability
• MK70: 1/2" – 1-1/2", 100:1
• MK70: 2", >200:1
• MK711: 2-1/2" – 3", >200:1
• MK711: 4" – 6", 100:1
• MK707: all sizes 100:1
-2-
Mark 70 Sliding Gate Control Valves
Cv Values and Maximum Allowable Differential Pressure Ratings
•
Mark 70
Flow Coefficient
Cv
Kv
Maximum Differential Pressure (PSI)
Valve Size
Seat
Material
Std. 35M Actuator
35M with
Positioner
Optional 55M
Actuator
55M with
Positioner
Optional 85M
Actuator
PSI
BAR
PSI
BAR
PSI
BAR
PSI
BAR
PSI
BAR
SST
125
8,6
175
12,1
175
12,1
175
12,1
175
12,1
Jorcote
250
17,2
500
34,5
350
24,1
700
48,3
550
37,9
2.5 or
4.4
2,2 or
3,8
1/2" & 3/4"
(DN15 &
20)
6.4 or
9.5
5,5 or
8,2
1" & 1-1/4"
(DN25 &
32)
SST
100
6,9
150
10,3
150
10,3
150
10,3
150
10,3
Jorcote
150
10,3
300
20,7
225
15,5
425
29,3
350
24,1
15
12,9
1-1/2"
(DN40)
SST
75
5,2
125
8,6
100
6,9
125
8,6
125
8,6
Jorcote
125
8,6
250
17,2
175
12,1
350
24,1
275
19,0
25 or
30
21,5 or
25,8
2"
(DN50)
SST
75
5,2
125
8,6
100
6,9
125
8,6
125
8,6
Jorcote
125
8,6
250
17,2
175
12,1
350
24,1
275
19,0
Based on 45 psi (3,1 bar) to actuator or psi
•
Mark 711 — Standard Actuator: 2-1/2" – 3": 55M;
4" – 6" 85M
Flow Coefficient
Cv (Kv)
Valve Size
85 (73)
2-1/2"
(DN65)
130 (112)
Seat
Material
•
Maximum ∆P, PSI* (BAR)
Standard
w/Positioner
Jorcote
50 (3,5)
275 (19)
3" (DN80)
Jorcote
50 (3,5)
275 (19)
200 (172)
4" (DN100)
Jorcote
50 (3,5)
325 (22)
395 (340)
6" (DN150)
Jorcote
50 (3,5)
225 (16)
Mark 707 — Standard Actuator: 1/2" – 3/4": 35M;
1" - 3": 55M; 4" – 6" 85M
Flow Coefficient
Cv (Kv)
Valve Size
Seat
Material
Maximum ∆P* PSI (BAR)
Standard
Actuator
w/Positioner
2.5 (2,2)
1/2" (DN15)
Jorcote
250 (17,2)
500 (34,5)
4.4, 6.4 or 9.5
(3,8; 5,5; or 8,2)
3/4" (DN20)
Jorcote
150 (10,3)
300 (20,7)
11.5 (9,9)
1" (DN25)
SST
100 (6,9)
175 (6,9)
Jorcote
150 (10,3)
300 (13,8)
SST
100 (6,9)
175 (6,9)
Jorcote
150 (10,3)
300 (23,8)
SST
100 (6,9)
150 (6,9)
Jorcote
150 (10,3)
150 (6,9)
SST
100 (6,9)
150 (6,9)
Jorcote
150 (10,3)
150 (6,9)
Jorcote
50 (3,5)
275 (19,0)
* Higher ∆P's available with optional larger actuators
13 (11,2)
22 (18,9)
1-1/4"
(DN32)
1-1/2"
(DN40)
34 (29,2)
2" (DN50)
60 (51,6)
2-1/2"
(DN65)
80 (68,8)
3" (DN80)
Jorcote
50 (3,5)
275 (19,0)
130 (112)
4" (DN100)
Jorcote
50 (3,5)
225 (15,5)
230 (198)
6" (DN150)
Jorcote
50 (3,5)
150 (6,9)
Low Flow: reduced Cv's can be used in any size valve as
long as it is a smaller value than is standard for that size.
In addition, these low flow Cv's can be provided:
-3-
1.6
0.84
0.42
0.21
0,02
0,008
0,004
0,002
0.08
0.04
0,0008 (N/A in 316SS)
Mark 70 Sliding Gate Control Valves
Maximum Working Pressures & Temperatures
•
Mark 70 & Mark 707 (1/2" – 2") (DN15 - DN50)
Maximum Pressure @ 100°F, PSI/°F
Packing
Any
DI Body
BRZ Body
150#
300#
TE
150#
250
640
988
225
CS Body
SST Body
300#
TE
150#
300#
TE
150#
300#
TE
500
500
285
740
1480
275
720
1440
Pressure @ Maximum Temperature, PSI/°F
TEF
170/450
495/450
808/450
150/450
325/450
325/450
170/450
600/450
1200/450
170/450
480/450
955/450
GRAF
125/650
450/650
715/650
150/500
325/500
325/500
125/650
535/650
1075/650
125/650
445/650
890/650
Maximum Pressure @ 38°C, BAR/°
Packing
DI Body
BRZ Body
CS Body
SST Body
150#
300#
TE
150#
300#
TE
150#
300#
TE
150#
300#
TE
Any
17
44
68
16
34
34
20
51
102
19
50
99
TEF
12/232
34/232
56/232
10/232
22/232
22/232
12/232
41/232
83/232
12/232
33/232
66/232
GRAF
9/343
31/343
49/343
10/343
22/343
22/343
9/343
37/343
74/343
9/343
31/343
61/343
Pressure @ Maximum Temperature, PSI/°C
•
Mark 711 & Mark 707 (2-1/2" – 6") (DN65 - DN150_
Maximum Pressure @ 100°F, PSI/°F
Packing
Any
DI Body
BRZ Body
150#
300#
TE
150#
250
640
—
—
CS Body
SST Body
300#
TE
150#
300#
TE
150#
300#
TE
—
—
285
740
—
275
720
—
Pressure @ Maximum Temperature, PSI/°F
TEF
170/450
495/450
—
150/450
325/450
—
170/450
600/450
—
170/450
480/450
—
GRAF
125/650
450/650
—
150/500
325/500
—
125/650
535/650
—
125/650
445/650
—
Maximum Pressure @ 38°C, BAR/°
Packing
DI Body
BRZ Body
CS Body
SST Body
150#
300#
TE
150#
300#
TE
150#
300#
TE
150#
300#
TE
Any
17
44
—
—
—
—
20
51
—
19
50
—
TEF
12/232
34/232
—
10/232
22/232
—
12/232
41/232
—
12/232
33/232
—
GRAF
9/343
31/343
—
10/343
22/343
—
9/343
37/343
—
9/343
31/343
—
Pressure @ Maximum Temperature, PSI/°F
-4-
Mark 70 Sliding Gate Control Valves
Pressure-Temperature Charts – MK70, MK74
Ductile Iron
Pressure (PSI)
1100
1000
900
800
Stainless Steel
•
1600
600 DI/TE/DI
1400
PTFE Pack.
700
1200
Std. Bolt
300 DI
600
Pressure (PSI)
•
SS/Has C Bellows
500
400
300
150 DI
200
100
0
600 SS/TE
1000
PTFE Pack.
800
Std. Bolt
300 SS
600
SS/Has C Bellows
400
0
100
200
300
400
Temperature °F
500
600
700
150 SS
200
0
•
0
Carbon Steel
100
200
400
300
Temperature °F
500
600
700
1600
1400
600 CS/TE/SW
Pressure (PSI)
1200
1000
800
300 CS
600
PTFE Pack.
Std. Bolt
SS/Has C Bellows
400
150 CS
200
0
•
0
100
200
300
400
Temperature °F
500
600
700
Cast Iron
•
600
600
150 CI
300/TE BR
150 CI
300/TE BR
500
400
Pressure (PSI)
Pressure (PSI)
500
300
200
100
0
Bronze
400
300
200
100
0
50
100
150 200
250
300 350
400
450
500
Temperature °F
0
0
100
200
300
400
Temperature °F
-5-
500
600
Mark 70 Sliding Gate Control Valves
Dimensions
D
•
1/4" NPT
Mark 70: Flanged Ends
Size
1/2"
3/4"
B
1"
1-1/4"
1-1/2"
2"
C
•
A
DN15
•
Mark 70: Threaded Ends
Size
1/2" &
3/4"
1"
1-1/4"
1-1/2"
2"
•
Dimensions (inches)
A
B
C
D
Weight
(lbs)
DI/BRZ
3.62
9.38
2.18
9.50
24
CS/SS
3.65
9.38
2.18
9.50
24
DI/BRZ
4.12
9.62
2.62
9.50
26
CS/SS
4.12
9.62
2.62
9.50
28
DI/BRZ
4.12
9.87
2.62
9.50
26
DI/BRZ
4.50
9.87
2.62
9.50
27
CS/SS
4.65
9.87
2.75
9.50
28
DI/BRZ
4.50
10.00
2.62
9.50
29
CS/SS
5.50
10.00
3.00
9.50
32
Material
DN20
DN25
DN32
DN40
DN50
Mark 70: Threaded Ends (metric)
Size
Material
DN15 &
20"
DI/BRZ
DN25
DN32
DN40
DN50
Dimensions (mm)
A
B
C
D
Weight
(kgs)
92
238
55
241
10,9
CS/SS
93
238
55
241
10,9
DI/BRZ
105
244
67
241
11,8
CS/SS
105
244
67
241
12,7
DI/BRZ
105
251
67
241
11,8
DI/BRZ
114
251
67
241
12,2
CS/SS
118
251
70
241
12,7
DI/BRZ
114
254
67
241
13,2
CS/SS
140
254
76
241
14,5
-6-
Dimensions (inches)
A1
B
C
D
Weight
(lbs)
150#
7.25
9.38
2.18
9.50
26
300#
7.50
9.38
2.18
9.50
28
150#
7.25
9.38
2.18
9.50
26
300#
7.62
9.38
2.18
9.50
28
150#
7.25
9.62
2.62
9.50
30
300#
7.75
9.62
2.62
9.50
32
150#
7.87
9.87
2.62
9.50
28
300#
8.37
9.87
2.62
9.50
30
150#
8.75
9.87
2.75
9.50
30
300#
9.25
9.87
2.75
9.50
32
150#
10.00
10.00
3.00
9.50
34
300#
10.50
10.00
3.00
9.50
36
D
Weight
(kgs)
Mark 70: Flanged Ends (metric)
Size
A1
ANSI
Flange
ANSI PN
Dimensions (mm)
A1
B
C
10/16
130
238
55
241
11,8
25/40
130
238
55
241
12,7
10/16
150
238
55
241
11,8
25/40
150
238
55
241
12,7
10/16
160
244
67
241
12,7
25/40
160
244
67
241
13,6
10/16
180
251
67
241
12,7
25/40
180
251
67
241
13,6
10/16
200
251
70
241
13,6
25/40
200
251
70
241
14,5
10/16
230
254
76
241
14,8
25/40
230
254
76
241
16,3
Mark 70 Sliding Gate Control Valves
Dimensions
•
D
1/4" NPT
Mark 707: Threaded Ends
Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
C
•
DN15
A1
DN20
•
Size
2-1/2"
3"
4"
6"
•
DN25
Mark 707 & Mark 711: Flanged Ends
ANSI
Flange
Dimensions (inches)
A1
125/150#
10.87
250/300#
11.50
125/150#
11.75
250/300#
12.50
125/150#
13.87
250/300#
14.50
125/150#
17.75
250/300#
18.62
B
19.50
C
5.12
D
15.00
DN32
Weight
(lbs)
DN40
210
19.50
5.37
15.00
255
20.75
6.00
15.00
325
21.50
7.00
15.00
410
DI/BRZ
Dimensions (inches)
A
B
C
D
Weight
(lbs)
3.62
9.38
2.18
9.50
24
CS/SS
3.65
9.38
2.18
9.50
24
DI/BRZ
4.12
10.82
2.62
12.50
37
CS/SS
4.12
10.82
2.62
12.50
39
DI/BRZ
4.12
10.82
2.62
12.50
37
CS/SS
4.12
10.82
2.62
12.50
39
DI/BRZ
4.12
11.07
2.62
12.50
37
DI/BRZ
4.50
11.07
2.62
12.50
40
CS/SS
4.65
11.20
3.00
12.50
43
DI/BRZ
4.50
11.20
2.62
12.50
40
CS/SS
5.50
11.20
3.00
12.50
43
D
Weight
(kgs)
Mark 707: Threaded Ends (metric)
Size
A
Material
DN50
Material
Dimensions (mm)
A
B
C
DI/BRZ
92
238
55
241
11
CS/SS
93
238
55
241
11
DI/BRZ
105
205
67
318
17
CS/SS
105
275
67
318
18
DI/BRZ
105
205
67
318
17
CS/SS
105
275
67
318
18
DI/BRZ
105
281
67
318
17
DI/BRZ
114
281
67
318
18
CS/SS
140
284
76
318
20
DI/BRZ
114
284
67
318
18
CS/SS
140
284
76
318
20
D
1/4" NPT
Mark 707 & Mark 711: Flanged Ends (metric)
Size
DN65
DN80
DN100
DN150
Dimensions (mm)
ANSI
Flange
A1
10/16
276
25/40
290
10/16
298
25/40
310
10/16
350
25/40
368
10/16
457
25/40
480
B
C
D
Weight
(kgs)
495
130
381
95
495
136
381
102
527
152
381
152
546
178
381
186
B
C
-7-
A
Mark 70 Sliding Gate Control Valves
Ordering Schematic
Model Size Body Mat'l
70
70SP
70TP
707
707SP
707TP
711
711SP
711TP
/
1
2
3
4
5
6
8
9
10
11
12
13
Model
3&4
Trim
Standard
Standard with Side Positioner
Standard with Top Positioner
Equal Percentage
Equal Percentage with Side Positioner
Equal Percentage with Top Positioner
Linear
Linear with Side Positioner
Linear with Top Positioner
T3
T6
I3
I6
303SS/TFE Pkg
316SS/TFE Pkg
303SS/Graphite
316SS/Graphite
5
Seat Material
V
W
303SS/Jorcote
316SS/Jorcote
Size
050
075
100
125
150
7
1/2" (DN15)
3/4" (DN20)
1" (DN25)
1-1/4" (DN32)
1-1/2" (DN40)
200
250
300
400
600
1
2
3
4
5
6
7
8
9
Body Material
DI
BR
CS
S6
Ductile Iron
Bronze
Carbon Steel (WCB)
Stainless Steel (CF8M)
1&2
End Connections
PT
BT
I5
F5
I7
F7
I6
F6
BP
SW
I3
F3
I8
F8
I4
F4
NPT
BSPT
150# IFE DI above 2" or CS or SST valves
150# FE DI below 2-1/2" or BR
PN1`0 IFE DI above 2" or CS or SST valves
PN10 FE DI below 2-1/2" or BR
PN16 IFE DI above 2" or CS or SST valves
PN16 FE DI below 2-1/2" or BR
BSPP
FSW
300# IFE DI above 2" or CS or SST valves
300# FE DI below 2-1/2" or BR
PN25 IFE DI above 2" or CS or SST valves
PN25 FE DI below 2-1/2" or BR
PN40 IFE DI above 2" or CS or SST valves
PN40 FE DI below 2-1/2" BR
Cv
MK70 & MK711
6
2" (DN50)
2-1/2" (DN65)
3" (DN80)
4" (DN100)
6" (DN150)
0.21 (0,28)
0.42 (0,36)
0.84 (0,72)
1.6 (1,4)
2.5 (2,2)
4.4 (3,8)
6.4 (5,5)
9.5 (8,2)
15 (13,0)
7, 8, 9, 10, 11, 12
N3Q3N3
Q3Q3N3
7, 8, 9, 10, 11, 12
A3B3A3
B3B3A3
G3B3A3
H3B3A3
A5B5A5
B5B5A5
G5B5A5
H5B5A5
A8B8A8
B8B8A8
G8B8A8
H8B8A8
-8-
14
A
B
C
F
G
H
I
J
25 (22)
30 (26)
50 (43)
85 (73)
115 (99)
130 (112)
200 (172)
395 (341)
15
16
MK707
5
6
N
P
S
U
1
2
H
3
2.5 (2,2)
4.4 (3,8)
11.5 (9,9)
13 (11,2)
22 (19)
34 (29)
60 (52)
80 (69)
130 (112)
230 (199)
Mark 70 Series Range & Actuator
Range
Actuator
3-15 DIR
3-15 REV
35M
All Mark 70 Models Range & Actuator
Range
Actuator
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
35M
55M
85M
Mark 70 Sliding Gate Control Valves
Ordering Schematic, Cont.
Model Size Body Mat'l
/
1
2
3
13 & 14
Accessories
00
AR
H3
H5
H8
S6
None
Air Regulator
Handwheel 35M Actuator
Handwheel 55M Actuator
Handwheel 85M Actuator
316SS Bolting
15
Action
D
R
Air-to-Close
AIr-to-Open
4
16
I/P
0
3
5
8
None
I/P 35M Actuator
I/P 55M Actuator
I/P 85M Actuator
17
SMP
0
None
A
SMP DIR/REV 3-15
B
SMP DIR/REV 3-9
C
SMP DIR/REV 9-15
D
SMP/IP DIR/REV 4-20
E
SMP/IP DIR/REV 4-12
F
SMP/IP DIR/REV 12-20
G
MK16IQ-S DIR/REV 4-20 (Hart & FM-App)
5
H
MK16IQ-B DIR/REV 4-20 (with gauges)
J
MK16IQ-FF DIR/REV 4-20 (Fieldbus w/ gauges)
Z
Non-Standard
6
-9-
7
8
9
10
11
12
13
14
15
16
3L/T-2R/S33 Series
Mark 701/702 Series
High-Flow and Super High-Flow Control Valves
The Mark 701/702 high-flow and super high-flow sliding
gate control valves provide:
•
Shorter Stroke than a globe or plug-style valve
—— Faster response
—— Longer packing and seat life
—— Stem packing is four times deeper than stem
travel – for greater protection against leakage
—— Smaller and lighter weight than globe-style
valves
•
Straight through flow
—— Less turbulence, erosion and noise
—— Fewer spare parts
—— Self-cleaning seats
—— No gaskets or o-rings
•
Ease of maintenance
—— Interchangeable seats and Cv's
—— Fewer spare parts
—— Self-cleaning seats
—— No gaskets or o-rings
Specifications
Sizes: 1/2" through 2" (DN15 through DN50)
End Connections
• Threaded (NPT, BSPT, BSPP)
• ANSI Flanges (150#, 300#)
• DIN Flanges (PN10/16; PN25/40)
Body Materials
• Ductile Iron
• Bronze
• Carbon Steel (WCB)
• Stainless Steel (CF8M)
Trim Materials
• 303SS for CI, DI, BRZ & CS body valves
• 316SS for SS body valves
Seat Materials
• Jorcote on SST – standard
Yoke: Cast Iron
Actuator: Steel
Diaphragm: Buna-N (standard, to 200°/93°C)
Stem Packing: Spring-loaded Teflon (to 450°F/232°C);
Graphite (to 1200°/649°C)
Service: steam, water, oil, gas, air and chemicals
Shutoff: ANSI Class IV
Ranges: 3-15, 3-9, 9-15, 6-30 psi (0,21-1,03; 0,21-0,62;
0,62-1,03; 0,41-2,1 bar)
Action
• Direct (air signal closes valve)
• Reverse (air signal opens valve)
Positioner: Side or top mounted positioners are available
to ensure that the valve stem position is always directly
proportional to the control system output signal. See the
Positioner section for more details.
Body Rating
• Ductile Iron up to 988 psi (68,1 bar) @ 100°F (38°C)
and 715 psi (49,3 bar) @ 650°F (343°C)
• Carbon Steel and Stainless Steel up to 1440 psi (99
bar) @ 100°F (38°C) and 890 psi (61 bar) @ 650°F
(343°C)
• Bronze up to 500 psi (35 bar) @ 100°F (38°C) and
325 psi (22 bar) @ 500°F (260°C)
• Temperature limit of -20°F (-29°C) on all materials;
-10for other temperatures, consult factory
Mark 701/702 High Flow & Super High Flow Sliding Gate Control Valves
Dimensions
Cv Values and Maximum Allowable
Differential Pressure Ratings
D
1/4" NPT
Cv
B
Valve Size
6.4
(5,5)
1/2" & 3/4"
(DN15 & 20)
7.0
(6,0)
1/2"
(DN15)
9.5
(8,2)
3/4"
(DN20)
15
1" & 1-1/4"
(12,9) (DN25 & 32)
C
18
(15,5)
1"
(DN25)
25
(22)
1-1/4"
DN32)
30
(26)
1-1/2" & 2"
(DN40 & 50)
35
(30)
1-1/2" & 2"
(DN40 & 50)
45
(39)
1-1/2"
(DN40)
50
(43)
2"
(DN50)
65
(56)
1-1/2"
(DN40)
70
(61)
2"
DN50)
A
A1
•
Mark 701/702: Flanged Ends
Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
•
Dimensions (inches)
ANSI
Flange
A1
B
C
D
Weight
(lbs)
150#
7.25
10.38
2.18
12.5
37
300#
7.50
10.38
2.18
12.5
39
150#
7.25
10.38
2.18
12.5
41
300#
7.62
10.38
2.18
12.5
45
150#
7.25
10.62
2.62
12.5
41
300#
7.75
10.62
2.62
12.5
45
150#
7.87
10.87
2.62
12.5
41
300#
8.37
10.87
2.62
12.5
45
150#
8.75
10.87
2.75
12.5
46
300#
9.25
10.87
2.75
12.5
55
150#
10.00
11.00
3.00
12.5
50
300#
10.50
11.00
3.00
12.5
57
•
Size
DN15
DN20
DN25
DN32
DN40
DN50
ANSI PN
1/2"
3/4"
1"
1-1/2"
Dimensions (mm)
A1
B
C
D
Weight
(kgs)
10/16
130
263
55
318
16,8
25/40
130
263
55
318
17,7
10/16
150
263
55
318
18,6
25/40
150
263
55
318
20,4
10/16
160
270
67
318
18,6
25/40
160
270
67
318
20,4
10/16
180
276
67
318
18,6
25/40
180
276
67
318
20,4
10/16
200
276
70
318
20,9
25/40
200
276
70
318
24,9
10/16
230
284
76
318
22,7
25/40
230
284
76
318
25,9
2"
•
35M w/Positioner
SST
125 (8,6)
150 (10,3)
Jorcote
200 (13,8)
250 (17,2)
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
SST
Jorcote
125 (8,6)
200 (13,8)
125 (8,6)
200 (13,8)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
100 (6,9)
150 (10,3)
150 (10,3)
250 (17,2)
150 (10,3)
250 (17,2)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
100 (6,9)
200 (13,8)
125 (8,6)
150 (10,3)
125 (8,6)
150 (10,3)
Material
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
Dimensions (inches)
A
B
C
D
Weight
(lbs)
3.62
3.65
3.62
3.65
4.12
4.12
4.50
5.00
4.50
5.50
10.38
10.38
10.38
10.38
10.62
10.62
10.87
10.87
11.00
11.00
2.18
2.18
2.18
2.18
2.62
2.62
2.62
3.00
2.62
3.00
12.50
12.50
12.50
12.50
12.50
12.50
12.50
12.50
12.50
12.50
35
35
35
35
37
39
40
43
40
43
Mark 701/702: Threaded Ends (metric)
Size
DN15
DN20
DN25
DN40
DN50
-11-
55M Actuator
Mark 701/702: Threaded Ends
Size
Mark 701/702: Flanged Ends (metric)
Max ∆P, PSI * (BAR)
Seat
Material
Material
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
CS/SS
Dimensions (mm)
A
B
C
D
Weight
(kgs)
92
93
92
93
105
105
114
140
114
140
264
264
264
264
270
270
284
284
284
284
55
55
55
55
67
67
67
76
67
76
318
318
318
318
318
318
318
318
318
318
16
16
16
16
17
18
18
20
18
20
Mark 701/702 High Flow & Super High Flow Sliding Gate Control Valves
Pressure-Temperature Charts – MK701/702
•
•
Ductile Iron
1100
1000
1600
600 DI/TE/DI
1400
900
PTFE Pack.
700
1200
Std. Bolt
300 DI
600
Pressure (psi)
Pressure (psi)
800
SS/Has C Bellows
500
400
300
200
100
0
Stainless Steel
150 DI
PTFE Pack.
800
Std. Bolt
300 DI
600
SS/Has C Bellows
400
0
100
200
400
300
Temperature °F
500
600
700
Carbon Steel
150 DI
200
0
•
600 DI/TE/DI
1000
•
0
100
200
300
400
Temperature °F
500
1400
Bronze
600/TE/SW SS
150 CI
300/TE BR
500
Pressure (psi)
1200
Pressure (psi)
700
600
1600
1000
800
300 DI
600
PTFE Pack.
Std. Bolt
SS/Has C Bellows
400
400
300
200
100
150 DI
200
0
600
0
0
100
200
300
400
500
600
700
Temperature °F
-12-
0
100
200
300
400
Temperature °F
500
600
Mark 701/702 High Flow & Super High Flow Sliding Gate Control Valves
Ordering Schematic
Model Size Body Mat'l
/
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Model
3&4
Trim
701
701SP
701TP
702
702SP
702TP
High Flow
High Flow with Side Positioner
High Flow with Top Positioner
Super High Flow
Super High Flow with Side Positioner
Super High FLow with Top Positioner
T3
T6
303SS/TFE Pkg
316SS/TFE Pkg
5
Seat Material
A
B
V
W
303SST
316SST
303SS/Jorcote
316SS/Jorcote
050
075
100
125
150
200
1/2" (DN15)
3/4" (DN20)
1" (DN25)
1-1/4" (DN32)
1-1/2" (DN40)
2" (DN50)
Size
6
7
L
M
8
9
R
T
Body Material
DI
BR
CS
S6
Ductile Iron
Bronze
Carbon Steel (WCB)
Stainless Steel (CF8M)
1&2
End Connections
PT
BT
I5
F5
I7
F7
I6
F6
BP
SW
I3
F3
I8
F8
I4
F4
NPT
BSPT
150# IFE DI above 2" or CS or SST valves
150# FE DI below 2-1/2" or BR
PN10 IFE DI above 2" or CS or SST valves
PN10 FE DI below 2-1/2" or BR
PN16 IFE DI above 2" or CS or SST valves
PN16 FE DI below 2-1/2" or BR
BSPP
FSW
300# IFE DI above 2" or CS or SST valves
300# FE DI below 2-1/2" or BR
PN25 IFE DI above 2" or CS or SST valves
PN25 FE DI below 2-1/2" or SST valves
PN40 IFE DI above 2" or CS or SST valves
PN40 FE DI below 2-1/2" or BR
-13-
16
Cv
6.4 (5,5)
6.4 (5,5)
9.0 (7,8)
9.5 (8,2)
15 (13)
18 (15,5)
24 (21)
7, 8, 9, 10, 11, 12
A3B3A3
B3B3A3
G3B3A3
H3B3A3
A5B5A5
B5B5A5
G5B5A5
H5B5A5
A8B8A8
B8B8A8
G8B8A8
H8B8A8
15
A
B
V
W
C
Y
E
25 (22)
30 (26)
35 (31)
45 (39)
50 (43)
65 (56)
70 (60)
Range & Actuator
Range
Actuator
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
3-15 DIR
3-15 REV
6-30 DIR
6-30 REV
35M
55M
85M
Mark 701/702 High Flow & Super High Flow Sliding Gate Control Valves
MK70/0316
Ordering Schematic, Cont.
13 & 14
Accessories
00
AR
H3
H5
H8
S6
None
Air Regulator
Handwheel 35M Actuator
Handwheel 55M Actuator
Handwheel 85M Actuator
316SS Bolting
15
Action
D
R
Air-to-Close
AIr-to-Open
16
I/P
0
3
5
8
None
I/P 35M Actuator
I/P 55M Actuator
I/P 85M Actuator
17
SMP
0
None
A
SMP DIR/REV 3-15
B
SMP DIR/REV 3-9
C
SMP DIR/REV 9-15
D
SMP/IP DIR/REV 4-20
E
SMP/IP DIR/REV 4-12
F
SMP/IP DIR/REV 12-20
G
MK16IQ-S DIR/REV 4-20 (Hart & FM-App)
H
MK16IQ-B DIR/REV 4-20 (with gauges)
J
MK16IQ-FF DIR/REV 4-20 (Fieldbus w/ gauges)
Z
Non-Standard
Jordan Valve, a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Jordan Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our
website at www.jordanvalve.com for the latest information on our products.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement