Trendnet TEW-703PI N150 Wireless PCI Adapter Quick Installation Guide

Add to my manuals
6 Pages

advertisement

Trendnet TEW-703PI N150 Wireless PCI Adapter Quick Installation Guide | Manualzz

150Mbps Wireless N PCI Adapter

( TEW-703PI)

150Mbps Low Profile Wireless N PCI Adapter

( TEW-703PIL)

Ÿ Quick Installation Guide (1)

1.01

1. Before You Start

Package Contents

ŸTEW-703PI/TEW-703PIL

ŸCD-ROM (Utility and User's Guide)

ŸMulti-Language Quick Installation Guide

Ÿ1 detachable antenna

Minimum Requirements

Ÿ32-bit PCI 2.2 slot

ŸCD-ROM Drive

Supported Operating Systems

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit)

CPU

1GHz or above

800MHz or above

300MHz or above

Memory

1GB RAM or above

512MB RAM or above

256MB RAM or above

2. How to Install

Important! DO NOT install the TEW-703PI/TEW-703PIL in the computer until instructed to do so.

1. Insert the Utility & Driver CD-ROM into your computer's CD-ROM Drive.

2. Click Run Autorun.exe (Windows 7/Vista only).

3. Click Install Utility & Driver.

1

4. Follow the InstallShield Wizard instructions.

Then click Finish.

5. Shutdown your computer.

6. Open your computer's case.

7. Insert PCI Card firmly into an available PCI Card slot of desktop PC, attach the included antenna, and then turn ON the computer and wait until the Windows desktop appears.

Note: Windows 7/Vista will automatically detect and install the appropriate drivers. For Windows XP, proceed to 8.

8. Follow the Found New Hardware Wizard instructions. Then click Finish.

Your installation is now complete

3. Connect to a Wireless Network

1. On the bottom right-hand corner of the screen, double-click on the Wireless Configuration

Utility icon. On Windows 7, if the icon does not appear, click the Show hidden icons arrow.

2

2. Click Available Networks.

3. Select a SSID and then click Add Profile. The

SSID is the wireless network name of your wireless network (e.g. wireless router or access point).

4. If Encryption is enabled on your wireless network (e.g. access point or wireless router), the correct Network Authentication and Data

Encryption type should be selected. Enter the

Network Key (wireless network password), confirm the network key and then click OK.

You are now connected to a wireless network

For detailed information regarding the TEW-703PI/TEW-703PIL configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or

TRENDnet's website at www.trendnet.com.

3

TRENDnet

20675 Manhattan Place

Torrance, CA 90501. USA

Copyright ©2011. All Rights Reserved. TRENDnet.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement