7245-003

7245-003
Pub. DS7245-003
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model 7245-003 Indoor
24 V DC Remote Subset Amplifier Enclosure
General Information
This data sheet applies to the Model 7245-003 Indoor 24 V DC Remote Subset Amplifier Enclosure. It is
constructed of fabricated steel, and is equipped with terminal strips for connecting inter-station cable and
a 24-pin connector to accommodate one of three types of GAI-Tronics subsets. The GAI-Tronics Model
723-003 Amplifier plugs directly into this enclosure.
The Model 7245-003 Amplifier Enclosure must be mounted within 8 feet of the subset due to the subset
cable limitations. In addition, it must be mounted at an indoor location.
Specifications
Mechanical
Construction/finish.................................................................. 16-gauge cold-rolled steel/gray polyurethane
Mounting.......................................... Wall or column, four 0.312-inch (7.92 mm) diameter mounting holes
Connections .............................................................................. Internal screw-type barrier terminal blocks;
24-pin subset connector
Dimensions ................................................................ 8.1 H × 8.1 W × 5.1 D inches (206 × 206 × 129 mm)
Shipping weight .................................................................................................................... 5.5 lbs. (2.5 kg)
Environmental
Temperature range ................................................................................. −22º F to 158º F (−30º C to +70º C
Relative humidity...................................................................................... Non-condensing, 85% maximum
Indoor environmental rating ............................................................................... Meets requirement of IP20
Approvals
NRTL certified for use in US and Canada ............................................... Class I, Div. 2, Groups A, B, C, D
CE Mark
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Model 7245-003 24 V DC Remote Subset Amplifier Enclosure
Pub. DS7245-003
Page: 2 of 2
Refer to Figure 1 for a typical installation of desk-edge or desktop subsets stations in the knee-well of the
desk. Refer to Figure 2 for a typical installation of flush-mount subset stations. Place the enclosure in a
location that provides easy installation and removal of the connectorized subset cabling, the plug-in
amplifier, the speaker cabling, and the system cabling.
Figure 1. Typical Desk-edge Installation
Figure 2. Typical Flush-mount Installation
Figure 3. Mounting Details
f:\standard ioms - current release\data sheets\ds7245-003.doc
11/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement