ESP Auto
ESP-AUTO
Universal Voltage Quartz Restrike System
Features
The ESP-Auto is a universal voltage (120-277V) control that
incorporates a current sense circuit that automatically lights
a quartz lamp when the main HID lamp is extinguished.
• For electronic ballasts from 120V-277V Universal Voltage Input
(Not for use with magnetic ballasts)
• Compact and simple to wire
• Measures the current drawn by the HID lamp circuit rather than
output voltage across the circuit allowing use with virtually any type
of lamp or ballast circuit
• Operates on HID circuits from 39-450 watts
• Operates auxiliary lamps up to 250W
• High temperature, flameproof plastic enclosure,
90ºC maximum surface temp rating
• Non-arcing switches allow the ESP-AUTO to be used in
Class 1, Division II vapor tight fixtures
• Can be wired directly to emergency generator power
• Not to be used to drive a Fluorescent standby source,
use ASP-AUTO-T for that application
• Patents Pending
• Quartz lamp is operated @ 120V for any line-voltage input;
120 through 277V
Wiring
Dimensions
12” leads, stripped 0.63”
120-277V
.75”
Electronic
HID Ballast
HID
Lamp
Com
Yellow
White
Black
250W Max
Quartz Load
Yellow
3.83”
1.5”
Red
Threaded Nipple:
½”-NPS
ESP-Auto
MADE IN USA
Of Imported And Domestic Components
Specifications subject to change without notice.
Rev 2-16-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement