Samsung CLX-3160 Series Product specifications

Product specification and feature

2

2. Product specification and feature

2.1 Product Specifications

Specfications are correct at the time of printing. Product specifications are subject to change without notice. See below for product specifications.

2.1.1 Product Overview

1) Key Feature

Speed

- 16ppm B&W, 4ppm color print / copy

Consumables

- Black toner (2K sheet)

- CMY toner (1K sheet)

Paper handling

- 1sheet Manual slot, 150 sheet Semi-cassette, 250 sheet cassette option

Interface

- USB 2.0, Ethernet 10/100 Base TX, USB host (PictBridge)

2) Concept

Small size Color laser MFP(A4 Color laser MFP)

Target user

- Small office & small business

- CLX-3160N (3in1, SPL)

- CLX-3160FN (4in1, SPL)

Black only printing function

Auto warning sheet

USB host function

- PictBridge

- Scan to USB memory, direct printing

Service Manual

2-1

Samsung Electronics


2.1.2 Product General Specifications

2.1.2.1 General Print Engine

CLX-3160 Series

Engine Speed Simplex

Duplex

Warmup time

FPOT (B&W)

FPOT (Color)

Resolution

From Ready

From Idle

From Coldboot

From Ready

From Idle

From Coldboot

Optical

Support

CLX-3160N Spec.

CLX-3160FN Spec.

Up to 16 ppm in A4 black (17 ppm in Letter) Up to 16 ppm in A4 black (17 ppm in Letter)

Up to 4 ppm in A4 color (4 ppm in Letter) Up to 4 ppm in A4 color (4 ppm in Letter)

N/A

Less than 35 sec

Less than 14 sec

N/A

Less than 35 sec

Less than 14 sec

Less than 45 sec

Less than 45 sec

Less than 26 sec

Less than 57 sec

Less than 45 sec

Less than 45 sec

Less than 26 sec

Less than 57 sec

Less than 57 sec

600 x 600 dpi

Less than 57 sec

600 x 600 dpi

MAX: 2400 x 600 dpi class, 1200 x 600 dpi MAX: 2400 x 600 dpi class, 1200 x 600 dpi

(default), 600 x 600 dpi(Color & B&W) (default), 600 x 600 dpi(Color & B&W)

2.1.2.2 Controller & S/W

CLX-3160 Series

MPU

Memory Std.

Max.

Memory Expansion

Printer Languages

Fonts

Printer driver Supporting OS

CLX-3160N Spec.


Samsung CHORUSm 300MHz

128 MB

128 MB

Samsung CHORUSm 300MHz

128 MB

128 MB

N/A N/A

SPL-C (Samsung Printer Language Color) SPL-C (Samsung Printer Language Color)

Windows fonts

[Windows]

- Windows 98/Me/2000/XP

- In box N/A

Windows fonts

[Windows]


- In box N/A

[Linux]

- RedHat 8.0 ~ 9.0

- Fedora Core 1~4

- Madrake 9.2 ~ 10.1

- SuSE 8.2 ~ 9.2

- (Smart panel N/A)

[Mac]

- Mac OS 10.3~10.4

- (Mac OS 9 N/A)

- (Smart panel N/A)

[Linux]

- RedHat 8.0 ~ 9.0

- Fedora Core 1~4

- Madrake 9.2 ~ 10.1

- SuSE 8.2 ~ 9.2

- (Smart panel N/A)

[Mac]

- Mac OS 10.3~10.4

- (Mac OS 9 N/A)

- (Smart panel N/A)

2-2


Samsung Electronics


Scan driver

Application

CLX-3160 Series CLX-3160N Spec.


Default Driver SPL-C (Samsung Printer Language Color) SPL-C (Samsung Printer Language Color)

WHQL Windows 2000/XP Windows 2000/XP

Language Localization [Windows] [Windows]

: Korean, English, French, German, Italian, : Korean, English, French, German, Italian,

Spanish, Russian, Dutch, E.Portuguese, Spanish, Russian, Dutch, E.Portuguese,

B.Portuguese, Finish, Swedish, Norwegian, B.Portuguese, Finish, Swedish, Norwegian,

Danish, S.Chinese, T.Chinese, Polish, Danish, S.Chinese, T.Chinese, Polish,

Hungarian, Czech, Turkish, Greek Hungarian, Czech, Turkish, Greek

[Mac] [Mac]

: English, French, German, Italian, Spanish, : English, French, German, Italian, Spanish,

Korea

[Linux]

: English only

Korea

[Linux]

: English only

TWAIN

WIA

Yes

Yes(Win XP only)

Yes

Yes(Win XP only)

Network Scan (Client) Yes (multi-folder) Yes (multi-folder)

PC-FAX

PSU

Status Monitor or

Virtual panel

N/A

USB only

USB / Network, Default Install

Yes(Mono Send only, Included in SmarThru4)

USB only

USB / Network, Default Install

Network Management Set IP, SWAS & SWS(Linux, Mac Not support Set IP, SWAS & SWS(Linux, Mac Not support

SWAS & SWS Iexplorer 5.0 or higher) SWAS & SWS Iexplorer 5.0 or higher)

SmarThru SmarThru 4 SmarThru 4

Interface

Parallel

USB

Network

Wireless

Network Interface

Protocol

User Interface

LCD

OP UI

N/A N/A

USB 2.0, USB host 1.1 (Scan to USB, Direct print) USB 2.0, USB host 1.1 (Scan to USB, Direct print)

Ethernet 10/100 Base TX Ethernet 10/100 Base TX

N/A N/A

TCP/IP, IPP, SNMP V2

2 line LCD (China, Korea : Graphic LCD)

OP UI Guide 2.0

TCP/IP, IPP, SNMP V2

2 line LCD (China, Korea : Graphic LCD)

OP UI Guide 2.0


2-3

Samsung Electronics


2.1.2.3 Scan

Scan method

Scan Speed

Resolution

Halftone

Scan Size

Scan Depth

Compatibility



Linearity, Halftone

Gray

Color

Optical

Enhanced

Color CCD Color CCD

15 Sec(300dpi,USB2.0,P4 3.0GHz,512M)/Ltr 15 Sec(300dpi,USB2.0,P4 3.0GHz,512M)/Ltr



600 x 1200dpi 600 x 1200dpi

4800dpi x 4800dpi 4800dpi x 4800dpi

256levels

Max. Document Width Max.216mm(8.5inch)

Effiective Scan Width Max 208mm(8.2inch)

Color

Mono

24bits

- 1bit for Linearity & Halftone

- 8Bits for Gray scale

[Windows]


[Linux]

- RedHat 8.0 ~ 9.0

- Fedora Core 1~4

- Madrake 9.2 ~ 10.1

- SuSE 8.2 ~ 9.2

256levels

Max.216mm(8.5inch)

Max 208mm(8.2inch)

24bits

- 1bit for Linearity & Halftone

- 8Bits for Gray scale

[Windows]


[Linux]

- RedHat 8.0 ~ 9.0

- Fedora Core 1~4

- Madrake 9.2 ~ 10.1

- SuSE 8.2 ~ 9.2

2-4


Samsung Electronics


2.1.2.4 Copy


Copy Speed

FCOT (B&W)

FCOT (Color)

Zoom Range

Multi Copy

Preset

Original Type

Simplex Copy Speed @SDMC up to 16 cpm in A4 black

(17 cpm in Letter)Up to 4 cpm in A4 color

(4 cpm in Letter)

Duplex Copy Speed N/A

From Ready Less than 18 sec

From Idle Less than 50 sec

From Coldboot

From Ready

From Idle

From Coldboot

Less than 50 sec

Less than 36 sec

Less than 75 sec

Less than 75 sec

25% to 400% for Platen

25% to 100% for ADF

1~99

[Original(100%)]

[A4 A5(71%)]

[LGL LTR(78%)]

[LGL A4(83%)]

[A4 LTR(94%)]

[EXE LTR(104%)]

[A5 A4(141%)]

25%, 50%, 150%, 200%, 400%

[Custom: 25-400%)]

Text

Text/Photo

Photo

Scan: 600x300dpi , Printing : 600x600dpi


Platen) Scan : 600x600dpi,

Printing : 1200x1200dpi

ADF) Scan : 600x300dpi,


Yes(Mono Only) Automatic Background Suppression

Darkness Control

Collation Copy

Special Copy ID Card Copy

Auto fit

Margin Shift

Book Copy

3 level

Yes(ADF Only), flushing if Memory full

Yes(Platen Only)

Yes(Platen Only)

No

No

Auto Suppression

Covers

Transparencies

Create Booklet

N-up copy

Clone

Poster

No

No

No

No

2-up, 4-up (ADF only)

Yes (Platen Only)

Yes(Platen Only, x9 Only)


@SDMC up to 16 cpm in A4 black

(17 cpm in Letter)Up to 4 cpm in A4 color

(4 cpm in Letter)

N/A

Less than 18 sec

Less than 50 sec

Less than 50 sec

Less than 36 sec

Less than 75 sec

Less than 75 sec

25% to 400% for Platen

25% to 100% for ADF

1~99

[Original(100%)]

[A4 A5(71%)]

[LGL LTR(78%)]

[LGL A4(83%)]

[A4 LTR(94%)]

[EXE LTR(104%)]

[A5 A4(141%)]

25%, 50%, 150%, 200%, 400%

[Custom: 25-400%)]



Platen) Scan : 600x600dpi,


ADF) Scan : 600x300dpi,


Yes(Mono Only)

3 level

Yes(ADF Only), flushing if Memory full

Yes(Platen Only)

Yes(Platen Only)

No

No

No

No

No

No

2-up, 4-up (ADF only)

Yes (Platen Only)

Yes(Platen Only, x9 Only)


2-5

Samsung Electronics


2.1.2.5 Fax

CLX-3160 Series

Compatibility

Communication System

Modem Speed

TX Speed

Compression

Color Fax

ECM

Resolution Std

Fine

S.Fine

Scan speed Std

Fine

S.Fine

Multiple page scan speed

Telephone Features Handset

On hook Dial

Search

1-Touch Dial

Speed Dial

TAD I/F

Tone/Pulse

Pause

N/A

N/A

Auto Redial N/A

Last Number Redial N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Functions

Distinctive Ring

Caller ID

N/A

N/A

External Phone Interface N/A

Mail Box

Voice Request

TTI

N/A

N/A

N/A

RTI

Polling

Earth/Recall

Auto Reduction

SMS

RDC

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

CLX-3160N Spec.

2-6



ITU-T G3

PSTN/PABX

33.6Kbps

3sec

MH/MR/MMR/JBIG/JPEG

Default (But Memory Transmission & Any

Reserved Transmission are not supported.)

Yes

203x98dpi

203x196dpi

300x300dpi

3sec/LTR (ADF)

5sec/LTR (ADF)

6sec/LTR (ADF)

20 ppm/LTR

Yes

No

Yes

No

No

Yes

Yes

No

No

Yes

No

Yes

No

Yes

Yes(Phone Book)

30

240 locations

Yes

Selectable in Tech Mode

Yes

Yes

Yes

Samsung Electronics

Report &

List Print out

CLX-3160 Series

Tx/Rx Journal

Confirmation

Sound Control

Auto Dial List

System Data List

Ring Volume

Key Volume

Speaker

Alarm Volume

Junk Fax barrier

Security Receive

Battery Backup

Rx fax duplex print out

Receive Mode

Capacity

Optional Memory

Max locations to store to 1 Group Dial

Fax Forward to FAX

Fax Forward to e-mail

Broadcasting

Cover page

Delayed fax

Memory RX

Mail Box (Electronic)

Voice Request

TTI

RTI

Polling

Earth/Recall

Auto Reduction

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

CLX-3160N Spec.



Yes

2 types available (with Image TCR, w/o image TCR)

Yes

List all user setting

Yes(Off,Low,MED,HIGH)

Yes(On,Off)

Yes(On,Off)

Yes(On,Off)

Yes

Yes

Yes (Up to 43 hours target)

No

Fax, TEL, Ans/Fax

4MB(320 Pages, Mono)

No

240 locations

Yes(On/Off), both Sent and Received

No up to 249 locations

No

Yes (Tx only, Mono only)

Yes

No

No

Yes

Yes

No

No

Yes (On,Off)


2-7

Samsung Electronics


2.1.2.6 Paper Handling



Standard Capa.

Max. Capa.

Printing Max. Size

Min. Size

Margin(T/B/L/R)

150-sheet Semi Cassette Tray

400 sheets @75g/

216 x 356mm (8.5" x 14")

76 x 127 mm (3" x 5")

4 mm, 4 mm, 4 mm, 4 mm

150-sheet Semi Cassette Tray

400 sheets @75g/

216 x 356mm (8.5" x 14")

76 x 127 mm (3" x 5")

4 mm, 4 mm, 4 mm, 4 mm

Multi-purpose tray

Capacity

Media sizes

Media type

Media weight

Sensing

Standard Cassette Tray - Semi cassette type

Capacity

Media sizes

Media types

Media weight

Size sensor

User Interface

Sensing

Optional Cassette Tray

Capacity

Media sizes

Media types

Media weight

Size sensor

User Interface

Sensing

Output Stacking

Capacity FaceUp

FaceDown

Output Full sensing

1 sheet

76 x 127 mm (3" x 5") ~ 216 x 356 mm

(8.5" x 14")

1 sheet

76 x 127 mm (3" x 5") ~ 216 x 356 mm

(8.5" x 14")

Plain Paper, Thick Paper, Thin Paper,

Bond Paper, Color Paper, Card Stock,

Plain Paper, Thick Paper, Thin Paper,

Bond Paper, Color Paper, Card Stock,

Labels Transparency, Envelope, Preprinted Labels Transparency, Envelope, Preprinted

Cotton,Recycled Paper, Archive Cotton,Recycled Paper, Archive

16~43lb (60 to 163g/ )

Paper detection sensor

16~43lb (60 to 163g/ )


150 sheets @ 75g/

76 x 127 mm (3" x 5") ~ 216 x 356 mm

(8.5" x 14")

Envelopes, Labels, Card stock,

Transparency(mono only) Papers (Preprinted, recycled)

16~43lb (60 to 163g/ )

N/A

No indicator, Cover


250 sheets

A4,Letter,Legal, Folio, A5

Plain Paper

16~24lb (60 to 90g/ , , )

N/A

No Indicator

Paper empty sensor

N/A

100sheets @ 75g/

Yes

150 sheets @ 75g/

76 x 127 mm (3" x 5") ~ 216 x 356 mm

(8.5" x 14")

Envelopes, Labels, Card stock,

Transparency(mono only) Papers (Preprinted, recycled)

16~43lb (60 to 163g/ )

N/A

No indicator, Cover

Paper empty sensor

250 sheets

A4,Letter,Legal, Folio, A5

Plain Paper

16~24lb (60 to 90g/ , , )

N/A

No Indicator

Paper empty sensor

N/A

100 sheets @ 75g/

Yes

2-8


Samsung Electronics

CLX-3160 Series

Duplex

Supporting

Throughput

Media sizes

Media types

Media weight

ADF

Paper Weight

Capacity

Document Size

Dimension

Weight


CLX-3160N Spec.

Manual

N/A

N/A

N/A

N/A

12.5~28lb (Non Coating)

50 sheets ( 20lb, 75 g/ )

Width: 142 ~ 216mm (5.6" ~ 8.5")

Length : 148 ~ 356mm (5.8" ~ 14.0")

460(W)x 3430(D) x 95(H) mm

5.6kg (, )


Manual

N/A

N/A

N/A

N/A

12.5~28lb (Non Coating)

50 sheets ( 20lb, 75 g/ )

Width: 142 ~ 216mm (5.6" ~ 8.5")

Length : 148 ~ 356mm (5.8" ~ 14.0")

460(W)x 343(D) x 95(H) mm

5.6kg (, )

Samsung Electronics


2-9


2.1.2.7 Consumables

CRU

No. of CRUs



Toner Black

Color

Key

Life detect

Replace method

Imaging Kit

(OPC+Deve)

Yield

Key

Sensor

Replace method

Waste Toner Bottle Yield

Key

FRU

No. of FRUs

ITB

Fuser

T2 Roller

Pick-up Roller

Yield

Key

Yield

Key

Yield

Key

Sensor

Yield

Key

ADF Lubber PAD

ADF Pickup Roller

6 (C/M/Y/K toner, Imaging Unit, Waste toner box)

K toner: CLX-K3160A

C toner: CLX-C3160A

M toner : CLX-M3160A

Y toner: CLX-Y3160A

Imaging unit: CLP-R300A (CLP-300 Series)

Waste toner box: CLP-W300A (CLP-300 Series)

CMY Rainbow kit: CLX-P3160A

2,000 A4/Letter pages, at ISO-19752 Std.

Coverage, Semi glossy



Unique, Electronic key(CRUM)

Toner Level Sensor

Remain % method

90% : warning

100% : empty

120% : hardstop

CMY key

3 step for install/replacing

Approx. 20K black pages

(or 12.5K color pages)


None, that would be traced via software

6 steps for install/replacing

1,250 sheets (Full Color Std. Image) or

5,000 images

N/A

6 (C/M/Y/K toner, Imaging Unit, Waste toner box)

K toner: CLX-K3160A

C toner: CLX-C3160A

M toner : CLX-M3160A

Y toner: CLX-Y3160A

Imaging unit: CLP-R300A (CLP-300 Series)

Waste toner box: CLP-W300A (CLP-300 Series)

CMY Rainbow kit: CLX-P3160A






Toner Level Sensor

Remain % method

90% : warning

100% : empty

120% : hardstop

CMY key

3 step for install/replacing

Approx. 20K black pages

(or 12.5K color pages)


None, that would be traced via software

6 steps for install/replacing

1,250 sheets (Full Color Std. Image) or

5,000 images

N/A

4 (ITB, Fuser, T2 roller, Pick-up roller) 4 (ITB, Fuser, T2 roller, Pick-up roller)

Approx. 60K black pages (or 15K color pages) Approx. 60K black pages (or 15K color pages)

None None

None None

100,000 sheets B&W or 50,000 sheets Color 100,000 sheets B&W or 50,000 sheets Color

None None

100,000 sheets, Replacable

None


None

100K

100K


None


None

100K

100K

2-10


Samsung Electronics


2.1.2.8 Reliability & Service

CLX-3160 Series

Printing Volume(AMPV)

Max Monthly Duty

MPBF

MTTR

SET Life Cycle

Real-time Clock

System-record

Test Print

RDC

Temperature

Humidity

Comm. Mode

Operation

Operating

Storage (Packed)

Operating

Storage (Packed)

CLX-3160N Spec.


360 page / B&W, 240 page / Color

24,200 images

40,000 pages (color 29,091 Mono 10,909

Total 40,000 image)

< 30 min.

200,000 image or 5 years

360 page / B&W, 240 page / Color

24,200 images

40,000 pages (color 29,091 Mono 10,909

Total 40,000 image)

< 30 min.

200,000 image or 5 years

None None

Total image count

Total page count (color/mono)

Imaging unit life

Fuser lifeTransfer roller life

Total image count

Total page count (color/mono)

Imaging unit life

Fuser lifeTransfer roller life

Transfer unit life

Toner image count (CMYK)

Transfer unit life

Toner image count (CMYK)

Tray roller life Tray roller life

Cartridge Coverage Machine Installed date Cartridge Coverage Machine Installed date

Configuration Sheet

Network Configuration Sheet

N/A

Configuration Sheet

Network Configuration Sheet

N/A

N/A

10 ~ 32.5 (59 ~ 90.5F)

-20 ~ 40 (-4 ~ 104F)

30 ~ 80% RH

30 ~ 85% RH

N/A

10 ~ 32.5 (59 ~ 90.5F)

-20 ~ 40 (-4 ~ 104F)

30 ~ 80% RH

30 ~ 85% RH


2-11

Samsung Electronics


2.1.2.9 Environment


Acoustic Noise

Level(Sound

Power/Pressure)

Input Voltages

Printing

Copying

Standby

Sleep

Less than 49.0 dBA (B/W printing)

Less than 52.0 dBA

Less than 35 dBA

Background noise level

110-127 VAC, 50/60Hz

220-240 VAC, 50/60Hz

Power Consumption

Certification

Emission

Dimension

(W x D x H)

Weight

Ready

AVG.

Max/Peak

Sleep/Power Off

Telecommunication

Environmental

Power Switch

Less than 160w

Less than 350W

*Curremcy : 5A(110V) / 3A(220V)

700W/1KW

Less than 30W

N/A

Safety

EMC/EMI

Ozone

Dust

Styrene

VOC

Energy star, TCO99 or TCO03/Swan/

Blue Angel, PTS (BAM)

Europe : TUV(GS), SEMKO(IEC950/

EN60950), CB

FCC Class B

CE class B

0

0

0

0

Set(mm)

Set Packing

460(W)x429(D)x486(H)

610(W)x570(D)x638(H)

Set (with consumables) 19.5 Kg

Set Packing 26.0 Kg

Consumable - Imaging Unit : 3.2 Kg

- Toner Cartridge(C/M/Y each) : 0.102 Kg

- Toner Cartridge(Black) : 0.176 Kg

Consumable Packing - Imaging Unit : 4.0 Kg




Less than 49.0 dBA (B/W printing)

Less than 52.0 dBA

Less than 35 dBA

Background noise level

110-127 VAC, 50/60Hz

220-240 VAC, 50/60Hz

Power Switch

Less than 160w

Less than 350W

*Curremcy : 5A(110V) / 3A(220V)

700W/1KW

Less than 30W

N/A

Energy star, TCO99 or TCO03/Swan/

Blue Angel, PTS (BAM)

Europe : TUV(GS), SEMKO(IEC950/

EN60950), CB

FCC Class B

CE class B

0

0

0

0

460(W)x429(D)x486(H)

610(W)x570(D)x638(H)

19.5 Kg

26.0 Kg

- Imaging Unit : 3.2 Kg



- Imaging Unit : 4.0 Kg



2-12


Samsung Electronics


2.1.2.10 Packing & Accessory

CLX-3160 Series

In-Box

CLX-3160N Spec.

Set

C/M/Y/K to be installed

Power cord

USB cable (China, Korea, India, Russia)

Set-up CD (Driver, manual), Application

N/W CD (SyncThru, manual)

Quick installation Guide sheet

Warranty book


Set

C/M/Y/K to be installed

Power cord

USB cable (China, Korea, India, Russia)

Set-up CD (Driver, manual), Application

N/W CD (SyncThru, manual)

Quick installation Guide sheet

Warranty book

2.1.2.11 Options

CLX-3160 Series

Second Cassette

Memory

PostScript

Network

Wireless Network

Hard Disk

Duplex Unit

CLX-3160N Spec.

250-sheet SCF

N/A

N/A

Default

N/A

N/A

N/A


250-sheet SCF

N/A

N/A

Default

N/A

N/A

N/A

Samsung Electronics


2-13


2.1.3 Model Comparison Table

Canon

MF8170C

Ricoh Samsung

CLX-3160FN

2-14


Samsung Electronics


2.2 System Overview

This chapter describes the functions and operating principles of the main components.

2.2.1 System Structure

2.2.1.1 Main Parts of System

Engine Part

9

4

5

6

7

8

3

2

4

5

1

2

3

Paper Cassette Input

Paper Cassette Output

2 nd

Transfer Roller

Fuser

ITB (Intermediate Transfer Belt)

1

6

7

8

9

1 st Transfer Roller

OPC (Organic Photo Conductor)

Developers (Y, M, C, & K)

Toner Kits (Y, M, C, & K)


2-15

Samsung Electronics


Cassette

Feeding Method : Cassette Type

Feeding Standard : Center Loading

Feeding Capacity : Cassette 150 Sheets(75g/ , 20lb Paper Standard)

No Manual Feeder

Paper Detecting Sensor : Photo Sensor (Empty, Registration, Exit)

Paper Size Sensor : None

LSU(Laser Scan Unit)

Consisted of LD(Laser Diode) and Polygon Motor Control.

Error

Polygon Motor Error

Hsync Error

Phenomenon

The Rotation of Polygon Motor can not reach stable

Though the rotation of Polygon Motor reach stable, the signal of Hsync is not occurred

2 nd Transfer Ass y

The life span: Print over 100,000 sheets (in 15~30 )

Specification: Similar to CLP-300 Series

Fuser Ass y

Heat Lamp : New Part - Knuckle Type

Heat Roller : Similar to CLP-300 Series

2 Pressure Roller : One is similar to HummingBird, the Other is a new added part comparing with other Fuser

Thermistor - Temperature-Measuring Device

Thermostat - Critical Temperature-Detecting Device

Fusing Temp. (180 )

H/W Protection Temp. (185 )

& ITB(Intermediate Transfer Belt) & 1st Transfer Roller

The life span: Print over 100,000 Images

The ITB unit includes 1st Transfer Roller

& OPC(Organic Photo-Conductor) & Developer

The life span: Print over 44,000 Images (Both)

Imagine Unit consists of 4 kinds of Developer , OPC, and Deve. Main Frame

Toner Kits

The life span: Color -> 1000 images (Std. Coverage Print-Out)

Black -> 2000 images (Std. Coverage Print-Out)

Driver Ass y

It is a power delivery unit by gearing

By driving the motor, it supplies the power to the feeding unit, the fusing unit, and the distributing unit.

The Main Motor is similar to CLP-300 Series Main Motor.

2-16


Samsung Electronics

2.2.1.2 Scanner( ADF)

3 in 1 : CLX-3160N

4 in 1 : CLX-3160FN

Scanning Method: Color CCD(600 x 1200 dpi)

Scan speed : SDMP 28cpm/MDSP 20cpm

Roller-ADF

Roller-Pickup


Roller-Exit

Roller-Feed

Samsung Electronics


2-17


2.2.1.3 FAX Section

Modem Part

BLOCK DIAGRAM

Implemented by based on Conexant DAA (Data Access Arrangement) Solution, and is roughly composed of two kinds

Chip Solution

- CX86710 (SFX336): Existing Modem Chip which adds SSD (System Side Device) for interfacing between LSD and

DIB of FM336Plus Core

- CX20493 (LSD) : LIU (Line Interface Unit) Chip which is controlled by SSD and satisfies each PSTN Requirements by modulating internal Configuration with connecting Tel Line.

2-18


Samsung Electronics


Modem (SFX336) specification.

2-wire half-duplex fax modem modes with send and receive data rates up to 33,600 bps

V.17, V.34, V.29, V.27 ter, and V.21 Channel 2

Short train option in V.17 and V.27 ter

PSTN session starting

V.8 and V.8bis signaling

HDLC support at all speeds

Flag generation, 0-bit stuffing, ITU CRC-16 or CRC-32 calculation and generation

Flag detection, 0-bit deletion, ITU CRC-16 or CRC-32 check sum error detection

FSK flag pattern detection during high-speed receiving

Tone modes and features

Programmable single or dual tone generation

DTMF receiver

Tone detection with three programmable tone detectors

Receive dynamic range:

0 dBm to -43 dBm for V.17, V.29, V.27 ter and V.21 Channel 2

9dBm to -43 dBm for V.34 half-duplex

Digital speaker output to monitor received signal

Two16-byte FIFO data buffers for burst data transfer with extension up to 255 bytes

V.21 Channel 1Flag detect

V.21 Channel 1Flag detect

+3.3V only operation

Typical power consumption

Normal mode: 264 mW

Samsung Electronics


2-19


Signal Transition of DAA Solution

Line Interface Signal of Tel Line and LSD is Analog Signal.

2) there is A/D, D/A Converter in LSD, so Analog Signal from Tel Line is converted in Digital through A/D Converter in

DAA and transfer to SSD by DIB Capacitor

Digital Signal from SSD is converted to Analog by D/A Converter in DAA and transfer to Tel Line

Transformer transfer Clock from SSD to LSD and Clock Frequency is 4.032MHz.

LSD full wave rectifies Clock to use as inner Power supply and also use as Main Clock for DIB Protocol Sync between

LSD and SSD. Transformer transfer Clock by separating Primary and Secondary, and amplifies Clock Level to LSD by Coil Turns Ratio 1:1.16.

Clock

- Clock is supplied by transformer from SSD to LSD, and there is PWROUT to adjust output impedance of Clock

Out Driver is inside SSD and CLKSHIGH Resistor to adjust duty of HLPWR Resistor and Clock.

SSD

CLKP

CLKN

DIBP

DIBN

LSD

Clock from SSD to LSD has Differential structure of 180 phase difference for Noise Robustness

DIB Data transfer Data from SSD to LSD by Transformer, and also transfer specific data from LSD to SSD.

After transferring data from SSD, RSP is transferred and LSD recognizes RSP and change LSD to output Driver transfer

Data to SSD.

DIB Data form SSD to LSD by Transformer has Differential structure of 180 phase difference between DIBP and DIBN for Noise Robustness

2-20


Samsung Electronics


2.2.1.4 Line Interface Part

This is Connection Part between system and PSTN(Public Switched Telephone Network), and primary circuit is usually located. Main functions are Line Interface, Telephone Connection and Line Condition Monitoring.

1 Telephone Line Connection

Modular Plug : RJ-11C

LIU PBA Modular Type : 623 PCB4-4

Line Code Length : 2500 50mm

Line Code Color : Black

ON HOOK state Characteristic

1) DC Resistance

DP Dial Mode (Direct Current 30mA) : 50 ~ 300ohm

DTMF Dial Mode (Direct Current 20mA) : 50 ~ 540ohm

2) Ring Sensitivity

Ring detection Voltage : 40Vrms 150Vrms (condition : Current = 25mA, Frequency = 15Hz) product Margin : 30Vrms 150Vrms

Ring detection Frequency : 15.3Hz 68Hz (condition : Voltage = 45Vrms, Current = 25mA ) product Margin : 15Hz 70Hz

Ring detection Current : 20mA 100mA (condition : Voltage = 40Vrms, Frequency = 20Hz) product Margin : over 15mA

3) False Ring Sound

Ring Frequency : 750 Hz + 1020 Hz

Ring interrupt Cycle : On/Off depending on input Ring Signal Cycle.


2-21

Samsung Electronics


2.2.1.5 Scan Part

Pictorial signal input part: output signal of CCD passes through Bypass Cap change to ADC at HT82V26, and defined signal between HT82V26 and CHORUSm processes the Image signal. When AFE accept each pixel, CDS(Correlated

Double Sampling ) technique which samples arm-level twice is used on each pixel by using CIP4e signal.

2) Pictorial image processing part: read CCD Pixel data in terms of 600dpi Line and process Error Diffusion Algorithm on

Text mode and Photo mode, and then store Data at Scan Buffer on PC Scan mode without algorithm.

On every mode Shading Correction and Gamma Correction are executed ahead, then processing is executed later.

* Scan Image Control Specification

Minimum Scan Line Time : 0.7062ms

Scan Resolution : Max. 600DPI

Scan Width : 216mm main function

- Internal 12bit ADC

- White Shading Correction

- Gamma Correction

- CCD Interface

- 256 Gray Scale

3) CCD Operating Part : CCD Image sensor use +5V and Inverter uses +24V

- CCD Maximum Operating Frequency : 10MHz

- CCD Line time : 0.7062ms

- White Data output Voltage : 0.7V 0.5V (Mono Copy, 0.75ms/line)

- Maximum Inverter Current : 600 mA Max.( +24V)

2.2.1.6 OPE Pannel Section

(1) Configuration

Operations Panel uses Main Control and separated OPE Chip Micom and work as inner program, systemic operation is serial system which exchange Date with SIO Port of Main Control. OPE Panel is approximately composed of Micom part, Matrix part and LCD.

(2) Micom controller

Micom has ROM, RAM, I/O Port built-in and displays and lights LCD by CPU command of Main Control Part and report

Key recognition Data to Main Control Board.

2-22


Samsung Electronics

2.2.1.7 EP Process

- Structure of EP Process


Samsung Electronics


2-23


- System Outline

Fuser

Paper path

OPC

Exit

Toner

Cartridge

ITB

LSU

Cassette

Charging

Conductive Roller charging

Roller resistivity : ~ 10^5 ohm-cm

Applied voltage : -1.1kV

Charge acceptance : -520V

OPC coating thickness : 21um

OPC diameter : 60mm

Non eraser system

1. Organic Photoconductor is charged to uniform voltage by conductive roll charging method

2. No ozone is produced because corona is not used

3. Charger roll is cleaned with cleaning roll

4. Toner remained on OPC after T1 process is cleaned by cleaning blade and retrieved into waste toner box by auger and belt driving mechanism

2-24


Samsung Electronics


Exposing

One polygon motor ( 6 facet )

Single beam LD (1ea)

LD wavelength : 785nm

Polygon motor rpm : 23747.5

LSU energy : 0.25uJ/cm^2

OPC exposed potential : -50V

1. Exposing is implemented by laser striking on to OPC with uniform potential

2. Laser beam is modulated according to image to be printed that is from PC

3. Latent Image is formed on OPC, which is developed with toner

Developing

Non-magnetic, mono component

Non-contact development

Developing bias : DC + AC

AC peak to peak : 1.5 ~ 2.0kV

Mass on developing roller : 550 ~ 600ug/cm^2

Toner coulomb : 15 ~ 20uC/g

Roller diameter : 10mm

Roller resistivity : 10^5 ~ 10^6 ohm-cm

Process speed ratio : 1.2 (OPC=1.0)

Color order : Y -> M -> C -> K

1. Only latent image formed by exposing process is developed with toner

2. AC + DC Voltage is being used to develop toner into latent image on OPC because non-contact developing method is adopted

3. Y, M, C, and K Images are sequentially developed onto OPC and transferred onto Intermediate

Transfer Belt (hereafter ITB) to form a color image on ITB

4. Toner Bottles are used to supply toner into developer compartment

5. Toner level is being sensed to control toner supply from toner bottle to developer

Transfer 1

Multi-pass transfer

Indirect transfer

Transfer voltage : 0.5 ~ 2.0kV (controllable)

Roller diameter : 14mm


Belt resistivity : 10^9 ~ 10^11 ohm-cm

Environment sensing by Y-transfer roller

Transfer unit life : 50K images

1. Developed Image on OPC is transferred onto ITB by T1 Process

2. T1 Voltage is positive which attract toner to ITB

3. 4 times of T1 process is required to make a color image on ITB, which means multi-pass process

4. ITB has a hole as a fiducial mark for timing. Engine control for color image is synchronous with it,

ITB Home Sensing Signal


2-25

Samsung Electronics


Transfer 2

Indirect transfer

Transfer voltage : 1 ~ 4.0kV (controllable)

Roller diameter : 18.6mm


Belt resistivity : 10^9 ~ 10^11 ohm-cm

Transfer unit life : 50 K images

1. Color image formed on ITB is transferred onto media by T2 process

2. T2 voltage is also positive to get color image moved onto media

3. Toner remained on ITB after T2 process is cleaning by ITB cleaning blade and collected and

4. Transported and retrieved into waste toner box by auger and belt driving system

5. T2 Roll is engaged when color image is being transferred onto media. Otherwise it is disengaged. Clutch is used for driving T2 Roll engagement and disengagement

Fusing

3 Roll system

-> short warm-up time (45sec)

Post Pressure Roll

1. Color Image on media is melted down and fixed into media by fusing process

2-26


Samsung Electronics


2.2.1.8 Copier Section

Copy Mode:

Scanner Type;

Maximum Size of Original:

(max. width = 218 mm, max length = 400 mm)

Optical Resolution:

Copy Quality - H x V:

(User selectable via Content button)

Supported Media Types:

Copy Speed:

(SDMP = Single Document,

Multiple Printout,

MDSP = Multiple Document,

Single Printout)

Reduce/Enlarge:

Non-printable Area:

Copy Count:

(Page count displayed on LCD during copy operation)

Copy Modes:

Fixed R/E Setting:

Darkness Control:

First Copy Output Time (FCOT):

Black and White

CCD with Flatbed/Platen and ADF

-Platen: 216 x 297 mm

-ADF: Legal (216 x 356 mm)

600 x 600 dpi

-Text : 600 x 300 dpi (default)

-Text/Photo : 600 x 300 dpi

-Photo : 600 x 600 dpi

Plain, Label, Cardstock, Transparency

-Platen, SDMP: 30cpm (Letter)

-ADF, SDMP: 30cpm (Letter)

-ADF, MDSP: 20cpm (A4, Text or Text/Photo)

10cpm (A4, Photo)

-Platen: 25% - 400% (1% increments)

-ADF: 25% - 100% (1% increments)

4 mm (Top, Bottom, and each Side)

1 to 199

Text, Text/Photo, Photo

100%, Auto-fit, 2(4)-Up

3 levels

-Platen: 8.5 sec. (600 x 300 dpi)

-ADF: 15 sec. (600 x 300 dpi)

2.2.1.9 Telephone Section

Speed Dial:

On-hook Dial (manual fax):

Last Number Redial:

Automatic Redial:

Pause:

Ringer Volume:

Tone/Pulse:

400 Locations (46 digits maximum per location)

Yes

Yes

Yes

Yes (using Redial key)

Off, Low, Medium, High

Selectable (Tech Mode Only no Telecom certification for Pulse mode)


2-27

Samsung Electronics


2.2.2 Main PBA Description

2.2.2.1 Print Board Assembled(PBA) Pictures

1) Top View of Main Controller

2) Bottom View of Main Controller

2-28


Samsung Electronics

3) Top View of SMPS


4) Bottom View of SMPS

Samsung Electronics


2-29


5) Top View of HVPS

6) Bottom View of HVPS

2-30


Samsung Electronics

7) Top View of OPE

8) Bottom View of OPE


Samsung Electronics


2-31


9) Top View of FAX

10) Bottom View of FAX

2-32


Samsung Electronics

11) Top View of ADF


12) Bottom View of ADF

Samsung Electronics


2-33


13) Top View of Joint B'D

14) Bottom View of Joint B'D

2-34


Samsung Electronics

2.2.2.2 Main PBA


Samsung Electronics


2-35


2.2.2.3 Main PBA Description

1) CHORUSm

CHORUSm involves in itself the functions to control ARM Processor Core and various H/W devices. CHORUSm, therefore, controls Main PBA and all engine mechanism, processing the print job received from host and enabling the engine to print image.

Function

Process

0.13um Technology

Package

496 PBGA

CPU Core

ARM 920T - 300MHz

Cache : I-Cache 16KB, D-Cache 16KB

System Bus

32-bit width, 100MHz

SDRAM Controller

32-bit width, 100MHz operation

5 Banks, Up to 128MB Address space per Bank

Programmable Timing to Control SDRAM A.C Characteristics

Support Self Refresh for Data Retention

ROM Controller

32-bit width, 4 Banks, Up to 16MB Address space per Bank

Burst Capability

Programmable Timing per Bank

2-36


Samsung Electronics

IO Controller

6 Channels, Up to 16MB Address space per Bank

Programmable Timing per Bank

DMA Controller

6 Channels General Purpose DMA

HPVC Controller

Hyper Printer Video Controller

High Performance DMA-based Interface to Printer Engine

Support Dual/Single Beam LSU, LVDS Video Output

Support A3, 1200dpi

UART Controller

5 Channels Indepenent Full Duplex UART

Interrupt Controller

Support 6 External Interrupts

Support 26 Internal Interrupts

Timer Controller

6 System Timers and Watch Dog Timer for S/W Trap

Scanner Controller

300/400/600/1200dpi CIS/CCD Interface

Color/Mono grey image, Binary image scan support

600dpi Color/Mono Copy support

Image Processing for High-End MFP,Digital Copier

MH/MR/MMR CODEC for Fax

Scan image : A4 1200dpi processing

Copy image : A4 600dpi processing

MAC Controller

10/100Mbps

Full IEEE 802.3 compatibility

PPI Controller

IEEE1284 compliant parallel port interface

DMA-Based or Interrupt-Based operation

GEU Controller

Graphic Engine Unit for Banding support of Printer Language

Scan Line Buffer, Polygon Filling

CODEC Controller

2 Channels JBIG Encoding and Decoding

I2C Controller

1 Channel, Operated at max frequency 400kHz

RTC Controller

Engine Controller

LSU Control and Interface Unit

2 Channels STEP Motor Control Unit

8 Channels PWM Control Unit

8 Channels ADC Control Unit

2 Channels DAC Control Unit

Samsung Electronics



2-37


CHORUSm (Internal Block Diagram)

2-38


Samsung Electronics


2) System Memory Block

Memory saves program and video data and print jobs received from host. Its volume is 64MB with network function and 32MB without network function. It has no separate device for extension. SDRAM is used, driven at width of 32-bit and 100MHz, and controlled by memory controller built in CHORUSm.

3) Flash Memory Block

Flash memory is the space used for saving program. Its volume is 4MB with network function and 2MB without network function. It has no separate device for extension. NOR type flash memory is used and accessed at 32-bit width burst, being controlled by the ROM controller built in CHORUSm.

4) USB2.0 Device Block

This block supports USB2.0 high speed (480Mbps). ISP1582 of Philips company is used and connected to the IO

Bus of CHORUSm at 16-bit, controlled by IO controller built in CHORUSm. Through this I/O port it receives print job from host.

5) Network Block

This block has 10/100Mbps wired network function and is controlled by MAC controller built in CHORUSm. It is connected to host through physical layer chip outside, and thus receives print job from host. STE100P is used for physical layer chip.

6) EEPROM Block

System EEPROM is controlled by the I2C controller built in CHORUSm, connected to the other non-volatile memory on I2C bus. It works at the speed of 400KHz. This system EEPROM contains all drive information and production information necessary for the operation of printer. Its size is 16k-bit.

7) OPE Control

The panel is driven in the form of PIO by UART controller built in CHORUSm.

8) LSU Control

Laser Scanning Unit is controlled by LSU controller built in CHORUSm. It makes use of all functions such as Polygon

Mirror Motor Control necessary for driving LSU and Synchronized Signal Generation Control, and helps to scan laser beam on the photosensitive drum to form latent image.

9) BLDC Control

It is controlled by BLDC controller built in CHORUSm. It controls the drive of printer mechanism and helps it to be driven at an equal speed.

10) Sensors Control

GPIO controller built in CHORUSm collects the status of all sensors. According to this status of sensors, it controls printer mechanism to help normal printing. There are sensors such as Paper Empty Sensor, Registration Sensor and

Developer Home Sensor, etc.


2-39

Samsung Electronics


11) Clutches Control

GPIO Controller built in CHORUSm controls all clutches, which help printer to do print job normally. There are clutches such as Paper Pick-up Clutch, Registration Clutch, Developer Home Clutch, ITB Clutch, T2 Clutch, Fuser Clutch,

Developer Toner Supply Clutch, etc.

12) PWM Control

PWM Controller built in CHORUSm controls the parts that require PWM for normal printing, such as BLDC drive speed and HVPS high voltage level, etc.

13) ADC Control

It is controlled by ADC Controller built in CHORUSm, and is used for perception of charged voltage and current, 1st and 2nd transfer voltage and current, fusing temperature, used-up toner and toner amount, and interior temperature, etc.

14) DAC Control

It is controlled by DAC Controller built in CHORUSm and used to set standard level of light amount of LSU Laser

Diode.

2-40


Samsung Electronics


2.2.2.4 SMPS(Switching Mode Power Supply) PBA

SMPS is consisted of SMPS part which supplies DC power for driving system and AC Heat Control part which supplies power to Fuser. Standard TYPE III is used.

1) DC Output

Main Controller PBA, OP Panel, BLDC, Sensors, Clutches, Other PBAs

2) AC Output

Fuser Unit(Heat Lamp, Thermostat)

3) Output Voltage

CHANNEL

V_out

Load

+5.0V

+5.0V +/-5%

MicroController,

CMOS, LOGIC

+24V

+24.0V +15%/-10%

LSU

+24VF

+24.0V +15%/-10%

MOTOR, CLUTCH,

HVPS

CON3 To Main PBA

CON1 AC Input

Samsung Electronics


2-41


2.2.2.5 HVPS(High Voltage Power Supply) PBA

HVPS PBA generates high voltage of charger, supply, T1 and T2 which is supplied to Developer, ensuring optimum condition for image formation. HVPS receives input of 24V and generates high voltage, supplying it to Toner, OPC,

Cartridge, ITB Unit and Transfer Roller.

2-42


Samsung Electronics


1) Charger Voltage : Charger

Function: voltage that charges OPC surface up to -500V~ -800V.

Output voltage: -1.0KV ~ -2.0KV DC 3%

Error type: if the voltage fails to be output to Charger Roll, OPC surface will not be charged, and the toner on the developer roller will be transferred to OPC Drum, printing black paper.

2) 1st Transfer High Voltage : T1(+)

Function: voltage necessary for transferring toner developed on OPC Drum surface onto ITB.

Output voltage: Max +2.0KV 3%(Duty variable, no load)

ERROR type: if T1(+) output fails, the toner on OPC drum will not be transferred to ITB normally and the image will be blurred.

3) 2nd Transfer High Voltage : T2(+)

Function: voltage used to transfer the toner primarily transferred on ITB again onto paper.

Output voltage: Max +5.0KV 3%(Duty variable, no load)

ERROR type: if T2(+) output fails, the toner on ITB will not be transferred to paper normally and the image will be blurred.

4) T2 Cleaning Voltage : Clean : T2(-)

Function: prevent reverse side of paper from being dirtied, by recovering the negatively charged toner remaining at

Transfer Roller and sending it onto ITB.

Output voltage: with no feedback control, output fixed voltage(-1300V +/- 15%)

ERROR type: reverse side of paper will be dirtied.

5) Supplying Voltage : Supply AC+DC(-)

Function: voltage that makes toner to develop on the area exposed by LSU by means of potential difference, output will be the voltage of AC+DC overlapped form.

Output voltage: AC 600V ~ 2000V p-p +/-1.5%

DC -50V ~ -600V DC +/- 3%

ERROR type: 1. if supply is GND, density will be extremely low.

2. if supply is floating (for insecure terminal contact), density will be down so slightly that it is impossible to make out with naked eyes.

6) Developing Voltage : Deve AC+DC(-)

Function: voltage that supplies toner to Developing Roller

Output voltage: AC 300V ~ 1700Vp-p 1.5% (supply voltage is connected to ZENER Diode 300V)

DC -50V ~ -600V DC +/- 3%

ERROR type: 1. if Deve is GND, density will be extremely down.

2. if Deve is floating (for insecure terminal contact), density will be extremely down.


2-43

Samsung Electronics


2.2.3 CRUM

In the case of Refill Toner Install

1) Perception of Refill Cartridge (when power is on or the cover is closed)

End of Life / life span data initialization -> judge to be Refill Cartridge

End of Life / life exhausted (simple refill) -> stop printing caused by life exhaustion

2) Operating

It is impossible to control appropriate development parameters, for there s no toner specification data.

It runs with the setting of default development parameter. (Image quality will be degraded, for the lack of appropriate respond to the change of time and environment.)

3) Service Response

It is possible to response appropriately, for the information of cartridge life is saved at Back Up Area.

Process after CRU life expiration

1) Record the information of End of Life.

2) Copy the information of Operating Area into Back up Area.

3) Write-Protect Back up Area.

4) Clear some information of Operation Area.

-> Supplier/Model Name/MFC date/Serial Number (Manufacture Information)

-> Let cartridge refiller initialize manufacture information and life span information.

2-44


Samsung Electronics


CRUM Position

Bottle

Agitator

Washer

Cap

Cap- CRUM

Seal

Agitator

Coupling

CRUM

Samsung Electronics


2-45


2.2.4 General Description

This chapter is the product specification for the CLX-3160FN Series. The CLX-3160FN Series is a Color Laser Printer.

The CLX-3160FN Series series can be expanded to multi functional printer (MFP). CLX-3160FN Series is developed for two target users. Those are small office users who sometimes need color printouts, and medium business users who mainly use B/W printouts. The main product concept is “the world smallest and lightest color laser printer”. This model has 16ppm B/W print-speed and 4ppm color print-speed, 2400 x 600 dpi class (optical 600 x 600 dpi) color laser printer.

2.2.4.1 Controller

-The video controller board is located on the right side of the printer.

-Basic Memory is 32 Mbytes SDRAM.

-Field F/W upgradeable FLASH ROM firmware for controller, 1024 byte EEPROM

-Printing Resolution :

Native 600 x 600 dpi standard

Resolution can be enhanced up to 2400 x 600 dpi class, 1200 x 600 dpi (default), 600 x 600 dpi

2.2.4.2 Processor

CHORUSm (300Mhz), Proprietary SOC

2.2.4.3 Printer Language Emulations

SPL-Color

2.2.4.4 Memory

The controller has 32 MB SDRAM and 4 MB flash ROM on Board.

2-46


Samsung Electronics


2.2.4.5 Interfaces

The system supports the following standard interfaces:

One USB port

- USB v.2.0 compliant

- Color-coded to meet WHQL requirements, connector must be Pantone 426C

One 10/100 BaseT network connector

- The printer supports an internal Network Interface that can be installed pre-configured on the video controller board at the factory. This supports all of the major Network Operating Systems such as the Novell

NetWare, TCP/IP, etc. Details of the network specification will be provided separately.

2.2.4.6 OP Panel

4in1 OP panel : FAX + COPY + SCAN + PRINTER)

3in1 OP panel : COPY + SCAN + PRINTER

16 x 2 LINE CHARACTER LCD

MODE ( FAX, COPY, SCAN)

KEY TYPE: CARBON COATING S/W

2.2.4.7 Periodic Replacing Parts

Samsung shall specify parts requiring replacement and the frequency of replacement. The parts identified may be deemed customer replaceable parts. Periodic replacement parts shall be recommended as follows

* Average A4-/letter-sized page count based on Std. coverage of individual colors on each page. Usage conditions and print patterns may cause results to vary.

** Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.


2-47

Samsung Electronics


2.2.4.8 Power Switch

The Switch is located at rear-side of printer and must be marked to indicate on and off.

2.2.4.9 Operator Panel

(1) Configuration

Operations Panel uses Main Control and separated OPE Chip Micom and work as inner program, systemic operation is serial system which exchange Date with SIO Port of Main Control. OPE Panel is approximately composed of Micom part, Matrix part and LCD.

(2) Micom controller

Micom has ROM, RAM, I/O Port built-in and displays and lights LCD by CPU command of Main Control Part and report

Key recognition Data to Main Control Board.

2.2.4.10 Sensor

Paper empty (Cassette)

2.2.4.11 CRUMS

The CLX-3160 Series engine will be equipped with electronics that can read and write data into NVRAMs otherwise known as CRUMs that reside within 1) C, M, Y, K Toner cartridges and 2) Imaging kit(Developer, OPC, ITB). The CRUM has a company ID, and Samsunga electronics logo.

The toner CRUM also identifies the type of toner cartridge (Standard or High Capacity). The CRUMs contain fixed data such as the low warning point, specified life point, and hard stop point (on toner, not on IBT unit) and also store the current life count (pages count, pixels count, images count) and % of usage (gas gauge) data.

2.2.4.12 LOW / OUT Behavior for consumables

The consumable low and out behavior on CLX-3160 Series engine is specified by SEC.

FP message

Toner

Imaging Kit

Fuser

T2 Roller

Pick-up

Device for life end detection

CRUM

CRUM

No

No

No

Law(90%)

Yes

Yes

Yes

Yes

No

Life(100%)

Yes

Yes

Yes

Yes

No

Hard stop

Yes(115%)

No

No

No

No

Reset to 0

No

No

Yes

Yes

No

2-48


Samsung Electronics

Samsung CLX-3160 Series Product specifications

2. Product specification and feature

2.1 Product Specifications

2.2 System Overview

Engine Part

Roller-ADF

Roller-Pickup

Roller-Exit

Roller-Feed

Bottle

Agitator

Washer

Cap

Cap- CRUM

Seal

Agitator

Coupling

CRUM

Related manuals

Samsung

CLP-300 XSG

Samsung

CLP-350

Samsung

CLP 600N - Color Laser Printer

Samsung

CLP-300

Dell

2145cn

Samsung

CLX-4195FN

Samsung

CLX-3160FNG

Dell

1815 Mono Laser