ViewSonic VT2216-L User guide

Add to my manuals
46 Pages

advertisement

ViewSonic VT2216-L User guide | Manualzz

VT1602-L/VT2216-L

LCD TV display

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”

Model No. VS15770/VS15772

Contents

Compliance Information ..........................................................................................i

Declaration of RoHS2 Compliance .........................................................................ii

Copyright Information .............................................................................................iii

Product Registration ...............................................................................................iii

Important Safety Instructions .................................................................................iv

Getting Started ................................................................... 1

Package Contents ....................................................................................................1

Installing the LCD TV ...............................................................................................2

Installing the Stand ............................................................................................. 2

Disconnecting the Stand .................................................................................... 2

Mounting ViewSonic LCD TV to the wall ............................................................ 3

Wall Mount Kit Specifications (VESA)

................................................................ 4

Front View of the Product .......................................................................................5

Rear View of the Product ........................................................................................6

Connecting the LCD TV ...........................................................................................7

Cable System or VHF/UHF Antenna System ..................................................... 7

Cable System and VHF/UHF Antenna System .................................................. 7

HD Cable Box/HD Satellite Box ......................................................................... 7

Personal Computer ............................................................................................ 10

Using the TV Features....................................................... 11

Remote Control and TV Controls ...........................................................................11

Inserting Remote Control Batteries .................................................................... 11

Remote Control and TV Controls ....................................................................... 11

Operation ..................................................................................................................14

Other Information .............................................................. 30

Troubleshooting .......................................................................................................30

Specifications

...........................................................................................................32

Customer Support ...................................................................................................33

Limited Warranty ......................................................................................................34

Mexico Limited Warranty ........................................................................................35

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning:

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic

Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

ENERGY STAR Information:

• ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection

Agency (EPA).

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.

Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

The power consumption will be changed, if the TV set up to be another mode except for default asshipped television configuration and settings.

The power consumption may exceed energy consumption beyond the limits required for ENERGY

STAR qualification when the optional function used or the operation mode changed in use.

Dolby Trademark Information:

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

i

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the

European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr 6+ )

Polybrominated biphenyls (PBB)

Polybrominated diphenyl ethers

(PBDE)

Proposed Maximum

Concentration

0.1%

0.1%

0.01%

0.1%

0.1%

0.1%

Actual Concentration

< 0.1%

< 0.1%

< 0.01%

< 0.1%

< 0.1%

< 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2

Directives as noted below:

Examples of exempted components are:

1.

Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and

EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦

500 mm): maximum 3.5 mg per lamp.

(2) Medium length ( > 500 mm and ≦ 1,500 mm): maximum 5 mg per lamp.

(3) Long length ( > 1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.

3.

Lead in glass of fluorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6.

Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

ii

Copyright Information

Copyright © ViewSonic

®

Corporation, 2014. All rights reserved.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.

For Your Records

Product Name:

VT1602-L/VT2216-L

ViewSonic LCD TV

Model Number:

VS15770/VS15772

Document Number:

VT1602-L/VT2216-L_UG_ENG Rev. 1A 01-03-14

Serial Number:

Purchase Date:

_________________________________

_________________________________

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

iii

Important Safety Instructions

Dangerous Voltage:

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.

Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

USE

AC power Cord

Keep the following guidelines to protect the AC power cord from being damaged. If the AC power cord is damaged, it may result in a fire or an electric shock. Stop using it and ask your dealer or ViewSonic service center to exchange it.

Do not place the TV where the power cord is subject to wear or abuse.

Do not pinch, bend, or twist the cord excessively.

• The core lines may be bared and cut, causing a shortcircuit, and resulting in a fire or an electric shock.

Do not convert or damage the power cord.

• Avoid power cord being rolled over or rested upon.

When the power cord is plugged in, do not move the TV.

Keep the power cord away from heat sources.

• When you disconnect the AC power cord, disconnect it from the wall outlet first.

When disconnecting the power cord, grasp the plug instead of pulling the power cord.

• Use only an original ViewSonic AC power cord, not other brands.

• Do not use the supplied AC power cord on any other equipment.

The main plug is used as the disconnect device, the disconnect devices shall remain readily operable.

Wall outlet

Insert the plug fully into the outlet. If it is loose, do not use it. Doing so may cause arcing and result in a fire. Contact your electrician to change the outlet.

Wiring

For your safety, be sure to unplug the AC power cord when connecting cables.

Take care not to trip on the cables. It may cause damage to the TV set.

Electric shock

Do not touch the AC power cord or the TV with a wet hand. If you plug/unplug the AC power cord from the TV with a wet hand, it may cause electric shock.

Lightning storms

During a lightning storm, unplug the TV from the wall outlet and disconnect the antenna to prevent damage to the TV.

When not in use

If you will not be using the TV set for long periods of time, the TV set should be disconnected from the AC power outlet to prevent power line surges. The TV set is not disconnected from the AC power source when the TV set is switched off.

To disconnect the TV set completely, unplug from the AC power outlet.

Overloading

This TV set is designed to operate on a 120V

AC supply only.

If there are too many appliances connected to the same AC power outlet, it could result in a fire or an electric shock.

iv

Optional equipment

If optional equipment is to be installed, leave some space between optional equipment and the TV set. Picture distortion and/or noisy sound may occur if the TV set is positioned in close proximity to any equipment emitting electromagnetic radiation.

Small accessories

Keep small accessories in a safe place where children are unable to reach.

Magnetic influence

This TV contains a strong magnet in the speaker unit that generates a magnetic field. Keep any items susceptible to magnetic fields away from the speaker.

Sound

If you hear snapping or popping sound comes from the TV continuously or frequently while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TVs to make occasional snapping or popping sounds, particularly when being turned on or off.

Use in outdoor

This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may result in a fire or an electric shock. Also, do not expose the TV to direct sunlight, as it may heat up and become damaged.

Vehicle, ships and other vessels

Do not install this TV in a vehicle.

Car accidents may cause the TV to fall down and cause injury.

Do not install this TV in a ship or vessel.

If the TV is exposed to seawater, it may cause a fire or damage the TV.

Medical institutions

Do not place this TV in a place where medical equipment is in use. It may cause the medical equipment to malfunction.

Volume adjustment

• Adjust the volume to avoid disturbing your neighbors.

Sound carries easily at night. Therefore, we suggest you close the windows or use headphones.

When using headphones, adjust the volume to appropriate levels, or hearing damage may result.

Section 810 of the National Electrical Code (NEC) in the

U.S.A. and Section 54 of the Canadian Electrical Code in Canada provides information with in regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna grounding according to the National Electrical

Code, ANS/NFPAFPA 70

Antenna

Ground clamp

Electric service equipment

Ground clamps

Antenna discharge unit

Grounding conductors

Power service grounding electrode system

CLEANING

Cleaning the AC power plug

Unplug the AC power plug and clean it regularly. If the plug is covered with dust and gathers moisture, its insulation may deteriorate and result in a fire.

Cleaning the screen surface/ cabinet of the TV set

When cleaning this TV, unplug the AC power cord. If not, it may result in electric shock. Use a dry soft cloth to clean the cabinet of the TV. To remove dust near the screen, wipe it gently with a soft cloth.

Stubborn stains may be removed with a cloth slightly dampened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning. If using a chemically pretreated cloth, please follow the instruction provided on the package. The ventilation holes can accumulate dust over time.

To ensure proper ventilation, we recommend you to remove the dust periodically (once a month) using a vacuum cleaner, while the LCD TV is powered off.

Disclaimer

Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of these cleaners.

ANTENNAS

Outdoor antenna grounding

If an outdoor antenna is installed, follow the precautions below.

Do not install the outdoor antenna system near of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,

EXTREME CARE SHOULD BE TAKEN TO KEEP FROM

CONTACTING SUCH POWER LINES OR CIRCUITS AS

CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so that it can provide some protection against voltage surges and built-up static charges.

CARRYING THE TV

Carry the TV as instructed

To prevent dropping the TV and causing serious injury, you must follow these guidelines:

Disconnect all cables before carrying the TV.

Carrying the large size TV requires at least two or three people.

When you carry the TV, place your hands as illustrated and hold it securely. Do not put stress on the LCD panel and the frame around the screen.

When carrying the TV, do not subject it to shocks, vibration, or excessive force.

v

When lifting or moving the TV, hold it securely from the bottom. Place your palm directly under the panel.

VENTILATION

Slots and openings in TV are provided for ventilation.

To ensure reliable operation of the TV and to protect it from overheating, be sure these openings are not blocked or covered.

The TV may accumulate dust and get dirty if proper ventilation is not provided. For proper ventilation, follow the following guidelines:

Never install the TV face up, down or sideways.

Never install the TV turned over or upside down.

Never cover the slots and openings with a cloth or other materials.

Never block the slots and openings by placing the TV on a bed, sofa, rug or other similar surface.

• Never place the TV in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

Leave some space around the TV set as shown below.

Otherwise, air-circulation may be inadequate and cause overheating, which may cause a fire or damage to the TV set.

Installed with stand

11.875 inches

(30.16 cm)

4 inches

(10 cm)

4 inches

(10 cm)

2.375 inches

(6.03 cm)

Leave at least this space around the set.

MOISTURE

Moisture and flammable objects

Keep the product away from moisture. Do not expose this appliance to rain or moisture. Do not place objects filled with liquids, such as vases, on the TV.

• Do not use power-line operated TV sets near water, such as in places like a bathtub, washbowl, kitchen sink, laundry tub, a wet basement, or near a swimming pool, etc. It may cause fire or electric shock.

Do not let this TV get wet. Never spill liquid of any kind on the TV. If water penetrates into the product, unplug the power cord and contact ViewSonic.

Do not operate the TV when wet. It may result in electric shock or damage to the TV.

• To prevent fire, keep flammable objects or open flame (e.g. candles) away from the TV.

INSTALLATION

Placement

The TV should be installed near an easily accessible AC power outlet.

Observe the following to prevent the TV from falling from the stand or wall mount.

Place the TV on a stable, level surface.

Do not hang anything on the TV. Do not allow children to climb on the TV. Do not install the

TV in places subject to extreme temperature, such as in direct sunlight, near a radiator, or heating vent. If the TV is exposed to extreme temperature, the TV may overheat and cause deformation of the enclosure or cause malfunction.

Do not install the TV in a place exposed to direct air conditioning.

If the TV is installed in such a location, moisture may condense inside and may cause a malfunction.

Do not place the TV in hot, oily, humid or excessively dusty places.

Do not install the TV where insects may enter.

Do not install the TV where it may be exposed to mechanical vibration.

Do not install the TV in a location where it may spear up, such as on or behind a pillar, or where you might bump your head on it. It may cause injury.

• WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases shall be placed on the apparatus.

Class I apparatus that construction shall be connected to a mains socket outlet with a protective earthing connection.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Preventing the TV from toppling over

To prevent the TV from toppling over, secure the TV to a wall or stand.

Placement for watching

We suggest you to watch the TV at a distance of 3-7 times that of the screen height, and not in excessive brightness.

It is easy to cause eye fatigue if you watch TV for too long or in a dark room. To obtain clear picture, do not expose the screen to direct illumination or sunlight. Use spot lighting directed down from the ceiling if you can.

vi

LCD SCREEN

• Although the LCD screen is made with high precision technology and has effective pixels of 99.99% or more, black dots or bright points or light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.

• The LCD screen is made with high-precision technology.

To achieve a high level of performance and picture quality, this TV’s backlight setting is set to maximize the brightness of the TV. However, uneven brightness may be observed when the LCD TV is viewed in a dark environment without an input source or a blank screen.

This is a normal condition, not a malfunction of the TV. To improve this condition, change the Picture mode, Backlight setting, enable the Light Sensor, or turn on the Power management.

• Avoid exposing the LCD screen surface to direct sunlight. It is likely to damage the LCD panel.

Do not push or scratch the LCD screen, or place objects on top of the TV. The image may be uneven or the LCD panel may be damaged.

If the TV is used in a cold place, a smear may occur in the picture or the picture may become dark. It is not caused by a failure. This condition will improve as the temperature rises.

When still pictures are displayed continuously, ghosting may occur. It should disappear after a short period of time.

The screen and cabinet get warm when the TV is in use.

This is a normal condition.

• Spraying insect repellent with volatile material on the screen will cause damage.

Do not make prolonged contact with rubber or plastic material.

Broken pieces

Do not throw anything at the TV.

Doing so may break the screen glass and cause serious injury.

If the surface of the TV cracks, unplug the AC power cord before touching the TV. Otherwise electric shock may result.

SERVICING

Do not attempt to repair the TV yourself, since opening the cabinet may expose you to dangerous voltage or other hazards.

Ask qualified service personnel to do the servicing for your TV.

Replacement parts

When replacement parts are required, be sure the service technician certifies in writing that he/she has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may cause a fire, an electric shock or other hazards.

Safety check

Upon completion of repairs to the TV, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the TV is safe for operating, and to so certify.

Ask a qualified service technician to dispose of the TV.

Handling of broken glass and liquid crystal leakage

If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid which is toxic, with bare hands as cuts, poisoning or skin irritation may occur.

Also do not glass fragments or leaked crystalline liquid get into your eyes or mouth. Should either contacted your eyes or mouth, rinse the contacted area thoroughly with water and consult your doctor.

vii

Getting Started

Package Contents

Please make sure the following items are included with your LCD TV.

If any items are missing, please contact your dealer.

or

LCD TV

(VT2216-L )

Stand /Screw x 2pcs / screw driver

Remote Control with batteries or

LCD TV

(VT1602-L )

Stand /Screw x 3pcs / screw driver

Power Cord

(for US model)

ViewSonic CD

(User Guide)

ViewSonic Quick Start Guide

The photos of the accessories are for reference only, the color of the remote control, the type of power cord are variable based on the actual models.

1

Getting Started

Installing the LCD TV

Installing the Stand

Figure 1 Figure 2 Figure 3

(VT2216-L )

(VT1602-L )

1. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. (see Figure 1)

2. Attach the foot stand and secure it with the included screws. Please fasten with a cross screw driver. (see Figure 2)

3. Stand the TV up. (see Figure 3)

Disconnecting the Stand

1. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. (see Figure 1)

2. Remove the screws and detach the stand from the TV. (see Figure 2)

Figure 1 Figure 2

2

Getting Started

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines:

Read the Important Safety Instructions, at the start of this manual.

Do not install in a moist or wet environment. This equipment is intended for indoor use.

Do not

install near heat source, or strong magnetic fields.

Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.

Before attaching the wall mount plate to the back cover, ensure the product is working.

• If your LCD TV is already set up for free-standing operation, you need to first remove the stand before mounting the device to the wall.

To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:

Disconnect the power and any other cables that might hinder moving the LCD TV.

Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen blanket to protect the screen surface from damage while installing plate.

Before installing the LCD TV on the wall, ensure you have recorded the product serial number on page (i) of the User Guide, as you will need the serial number to request service should there be a service need.

Install the wall mount plate to the LCD TV using screws NO LONGER than 12mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. The wall-mount screw type is M4 x L12.

Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during operation.

Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.

Enjoy your ViewSonic LCD TV!

3

Getting Started

Wall Mount Kit Specifications (VESA)

When attaching to other building materials, please contact your nearest dealer.

A

C

B

D

Product Family

LCD TV

LCD TV inch

22

16

VESA Spec. (A x B)

100 x 100 mm

75 x 75 mm

Standard Screw

(C x D)

M4 x L12

M4 x L12

Quantity

4

4

ViewSonic provides the standard dimensions for wall mount kits as shown in the table above.

• To find the perfect mount, please browse www.viewsonic.com or call our service team:

United States 1-800-688-6688, Canada 1-866-463-4775, Europe +44 (0) 207 382 8250.

When purchasing our wall mount kit, a detailed install manual and all parts necessary for assembly are provided.

Do not use the screws that longer than the standard dimension, as they may cause damage to the inside of the TV set.

4

Getting Started

Front View of the Product

2

3

4

5

6

Item

LED Indicator

1

Remote Control

Receiver

2 Volume

3 Channel Select

4 Menu

5 Input

6 Power

1

Icon Description

Blue indicates power on. Red indicates standby mode.

Receive IR signals from the remote control.

VOL -

VOL +

Decrease the volume.

Move to the left or adjust the setting on the OSD menu.

Increase the volume.

Move to the right or adjust the setting on the OSD menu.

Return to the previous channel.

CH -

CH + Advance to the next channel.

MENU Turn the on-screen display (OSD) menu on / off.

INPUT

Select the input source.

Enter the submenu.

Turn the power on from standby mode. Touch it again to return to standby mode.

5

Getting Started

Rear View of the Product

11

10

1

USB

DIGITAL

AUDIO

OUT

AUDIO IN

R L

Y/

VIDEO IN

Pb Pr PC/VGA IN PC/VGA

AUDIO

IN

9

2 3 4 5 6 7 8

Item

1 Power (AC input)

2 USB

3 Digital Audio out. jack

4 Audio input (left/ right)

5 Composite Video input

6 YPbPr signal input

7 VGA signal input

8 PC/VGA Audio input

9 HDMI inputs

10 TV Input Jack

11 Earphone Jack

Description

Connect to the AC input power source.

Connect to USB devices, such as USB flash drive.

Connects to the audio jack on the digital/standard 5.1 audio system

Connect to the corresponding audio connectors on your A/V device

Connect to the composite video output connectors on your A/V equipment

Connect to the YPbPr output of A/V device

Connect to a PC VGA port.

Connect to a PC line / audio port.

Connect to the HDMI outputs of A/V devices.

Connect to an antenna or cable TV

Connect to earphones. By connecting the earphones, you can listen to the sound from the TV through the earphones.

j If you connect the earphones, the TV speakers will be muted.

6

Getting Started

Connecting the LCD TV

Cable System or VHF/UHF Antenna System

Enjoy the high-definition and standard-definition digital programming along with standard-definition analog programming.

This TV is capable of receiving unscrambled digital programming for both cable and external VHF/

UHF antenna.

We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable

(not supplied) to ensure the best picture quality.

Cable or VHF/UHF

75-ohm coaxial cable Rear side of the TV

VHF/UHF/CABLE input

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and antenna programming, as shown below.

A-B RF switch

Cable

Rear side of the TV

Antenna

VHF/UHF/CABLE input

Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.

HD Cable Box/HD Satellite Box

You can also enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the optimum picture quality, be sure to connect this device to your TV via the HDMI or component video (with audio) input on the rear side of your LCD TV.

HDMI Connection

Rear side of the TV

HD cable box /

HD satellite box

COMPONENT

VIDEO OUT

LINE OUT

R

Y AUDIO L VIDEO Pr

Pb

DVI-HDTV OUT

HDMI OUT

IN

OUT

HDMI cable

CATV / Satellite antenna cable

HDMI cable

7

Getting Started

DVI Connection

Pb

Rear side of the TV

Pr PC/VGA IN PC/VGA

AUDIO

IN

HD cable box /

HD satellite box

COMPONENT

VIDEO OUT

LINE OUT

R

Y

AUDIO L VIDEO

Pr

Pb

DVI-HDTV OUT

HDMI OUT

IN

OUT

Audio cable

DVI-to-HDMI cable

CATV / Satellite antenna cable

DVI-to-HDMI cable DVI-to-HDMI adapter Audio cable

For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or adapter), and connect the audio jack to the AUDIO IN jacks of PC Audio input.

HDMI Timing Reference Chart

No.

Mode

10

11

12

13

8

9

6

7

14

15

3

4

1

2

5

16

17

18

19

20

21

VGA60 (640x480)

SVGA60 (800x600)

XGA60 (1024x768)

SXGA60 (1280x1024)

WXGA60 (1360x768)

1280 x 800

1440 x 900

1680 x 1050

1920 x 1080

480i60

576i50

480P60

576P50

720P50

720P60

1080I50

1080I60

1080P50

1080P60

1080P24

1080P30

HDMI

V

V

V

V

NA

NA

NA

V

V

V

V

V

V

V

NA

V

V

V

V

NA

NA

DVI

V

V

V

V

NA

NA

NA

V

V

V

V

V

V

V

NA

V

V

V

V

NA

NA

8

Getting Started

YPbPr or Component Connection

DIGITAL

AUDIO

OUT

Rear side of the TV

AUDIO IN

R L

Y/

VIDEO IN

Pb Pr PC/VGA IN PC/VGA

AUDIO

IN

HD cable box /

HD satellite box

COMPONENT

VIDEO OUT

Pr

LINE OUT

R

Y

AUDIO L VIDEO

Pb

DVI-HDTV OUT

HDMI OUT

IN

OUT

Component cable

Audio cable

CATV / Satellite antenna cable

Component cable

YPbPr provides better quality than the AV connection.

Audio cable

AV Connection

DIGITAL

AUDIO

OUT

AUDIO IN

R L

Y/

VIDEO IN

Pb Pr

HD cable box /

HD satellite box

PC/VGA IN PC/VGA

AUDIO

IN

COMPONENT

VIDEO OUT

Pr

LINE OUT

R

Y

AUDIO L VIDEO

Pb

DVI-HDTV OUT

HDMI OUT

IN

OUT

CATV / Satellite antenna cable

AV cable

AV cable

9

Getting Started

Programming your Cable or Satellite Box remote

Refer to the user manual from your service provider to determine the setting.

If it requires:

3 digits, please try “566”, “565”, “556”, or “688”. It usually works with DISHNetwork.

4 digits, please try “0054”. It usually works with Cox.

5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.

Personal Computer

Use the LCD TV as the monitor of your computer.

Rear side of the TV

USB

DIGITAL

AUDIO

OUT

AUDIO IN

R L

Y/

VIDEO IN

Pb Pr PC/VGA IN PC/VGA

AUDIO

IN

Audio cable (stereo mini plugs)

VGA 15 Pin cable

Connect the PC IN jack to the PC using a 15-pin cable and audio cable.

PC Timing Reference Chart

No.

Mode

VGA Timing

Resolution

1

2

3

4

IBM VGA

VESA DMT

VESA DMT

VESA DMT

VESA DMT 5

8

9

6

7

VESA DMT

VESA DMT

VESA DMT

VESA DMT

10 VESA DMT

11 CEA

720 x 400

640 x 480

800 x 600

1024 x 768

1280 x 768

1280 x 800

1280 x 1024

1360 x 768

1440 x 900

1680 x 1050

1920 x 1080

47.77

49.7

63.98

47.71

55.94

65.29

67.5

Panel FullHD (1920 x 1080) Support

H sync

(kHz)

V sync

(Hz)

Pixel clock

(MHz)

Polarity Support

31.47

70.09

28.32

N/P V

31.5

37.88

48.36

59.94

60.32

60

25.175

40

65

N/N

P/P

N/N

V

V

V

59.8

59.81

60.02

60.01

59.89

59.95

60

79.5

83.5

108

85.5

106.5

146.25

148.5

N/P

N/P

P/P

P/P

N/P

N/P

P/P

V

NA

V

NA

NA

NA

V

This TV PC VGA input does not support interlaced signals.

10

Using the TV Features

Remote Control and TV Controls

Inserting Remote Control Batteries

1. Remove the battery cover by pulling then lifting the knob on the cover.

2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.

3. Reattach the battery cover.

CAUTION

• Only use the specified AAA batteries.

Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of fire or lead to personal injury.

Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in leakage, which may pose a risk of fire or lead to personal injury.

Dispose of the battery in accordance with local laws and regulations.

Keep the batteries away from children or pets.

When the remote control will not to be used for an extended period, remove the batteries.

5

6

7

8

9

10

Remote Control and TV Controls

1

2

3

11

12

Touch keys located at the front side of the TV operate the same as these buttons on the remote control.

4

18

19

20

13

14

15

16

17

Button

1 POWER

2

3

TV

INFO

Description

Press this button to turn the power on from standby mode. Press it again to return to standby mode.

Changes source to TV Tuner.

Press to display the current state of the display.

11

5

6

7

8

9

10

Using the TV Features

1

2

3

4

11

12

13

14

15

16

17

18

19

20

Button

4 0~9, - number

5

6 buttons

- VOL +

FAV

7

▲▼◄►/

ENTER buttons

8 INPUT

Description

Press the respective button to select a channel.

After you input the channel numbers, press

ENTER to direct to the channel immediately, or wait for 3 seconds to change automatically.

Press to adjust the volume.

Press this button to show Favorite List and select your favorite channels that have already been stored.

j To preset favorite channels, set the Favorite option in the Channel menu (see page 16).

Press these buttons to navigate the OSD menus.

• ▲/▼ - move upward/downward to select menu options.

• ◄/► - move to the right/left to select the main menu or adjust the settings.

You can also use ► to enter the corresponding submenu.

ENTER

: Confirm the selection or enter the corresponding submenu.

Press to display the Source

Select list and select the source with ▲/▼.

To confirm the selection, press

ENTER.

PC

Media

9 PICTURE Press this button repeatedly to select the preset

10 SOUND picture mode.

Available options: Standard, Movie, User, Power

Saving, or Dynamic.

Press this button repeatedly to select the preset

11 MTS

12 MUTE sound mode.

Available options: Standard, Soft, User or

Dynamic.

Press this button to choose the available sound output that is preset by TV broadcasting station.

Available options: Mono, Stereo, or SAP.

Press to turn off the sound. To restore the sound, press this button again, or press the

VOL+/button.

12

5

6

7

8

9

10

1

2

3

4

Using the TV Features

18

19

20

11

12

13

14

15

16

17

Button Description

13 RETURN Press to return to the previous channel.

14 C.C

Press to select the Closed Caption menu in the

TV or AV mode.

15

▼ CH ▲

Decrease or Increase the channel number

Press to display the Electronic Program Guide

16 GUIDE (EPG). It contains the program information for the channel you’re watching.

17 EXIT Press to exit the OSD menu screen.

18 MENU

Press to turn the OSD (On-Screen Display) menu on.

19 ASPECT Press this button repeatedly to select the screen

20 SLEEP size.

Available options: Normal, Wide, Cinema, or

Zoom or Full 100%.

* For

Full 100%

option, it is only available on

HDMI/DVI input source.

Press repeatedly to set the sleep timer. The TV will automatically turn off after a preset period of time.

Available options: OFF, 15 min., 30 min., 60 min., 90 min., or 120 min..

13

Using the TV Features

Operation

Turning the TV On and Off

Press on the remote control.

You can also use the key on the front side of the panel.

j If there is no input signal within 10 minutes, TV will be turned off automatically.

Initial Setup

If an antenna or cable (without a cable box) is connected to your

TV’s tuner, you will need to go through an INITIAL SETUP process in order to watch the TV. The setup wizard will automatically start when you first turn on the TV.

1. Press ◄ or ► button to select the

Menu Language preference.

2. Press ▲ or ▼ button to select the options you want to adjust and Press ◄ or ► button to change its value.

3. Press ◄ or ► buttons to select your connection type between

Air (antenna) or Cable and press

ENTER to scan for channels.

4. The channel scan may take a while to complete, and after it is done, the screen will return to the first found channel.

Please Note: j The time setting on the TV will only keep accurate time if you do not unplug or turn off standby power from the TV.

j Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information. j The HDTV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your HDTV might lose picture or sound. j ViewSonic wants to help you save energy! This HDTV meets the ENERGY STAR® guidelines under the default picture setting called POWER SAVING. Changing this setting or enabling other options will increase power consumption

which could possibly exceed the guidelines of ENERGY STAR®.

14

Using the TV Features

Changing Channels

1. Using Channel Buttons

Press ▼CH▲ to change channels, and the TV changes the available channels in sequence.

2. Using Number Buttons

(1) ATV

The “-” has no function in ATV mode. Directly press the number buttons to select channels.

(2) DTV

Use “-” to select the sub channel in DTV.

For example: Your sub channel number is 80-3.

Press 8 → press 0 → press “-” → press 3.

j Return to the previous channel, press RETURN.

Adjusting the Volume

Press

VOL +/- to adjust volume.

To turn off the volume, press MUTE.

To restore volume, press MUTE again, or press

VOL +/-

directly.

Viewing the Displayed Information

To display the current information of the LCD TV:

Press INFO, and the current state will be displayed on the screen.

(It shows all or some of the information about Input, Channel,

Resolution, Audio Type, etc., depending on the input source)

15

Using the TV Features

Selecting the Input Source

To select the TV or other external input sources connected to the

TV:

1. Press INPUT on the remote control.

2. Press ▲ or ▼ to select the desired input source.

3. To confirm the selection, press

ENTER.

Favorite Channel Setting

To set your favorite channel into memory:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select CHANNEL

menu, then press ENTER to enter the menu.

3. Press ▲ or ▼to select

Favorite

, then press ► to enter.

4. Press ▲ or ▼ to select the channel you want to add into your favorite channel.

5. Press ◄ or ► to highlight

Favorite , and press ENTER

to confirm your selection.

6. To cancel the selection, press ENTER again on the selected .

7. Press EXIT to exit the menu.

j To view your favorite channels, press FAV to display Favorite

List and select your favorite channels that have already been stored.

Customizing Channel Label

To customize a name for the current channel:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select CHANNEL

menu, then press ENTER to enter the menu.

3. Press ▲ or ▼to select

Channel Label

, then press ► to enter

Channel Label submenu.

4. Press ◄ or ► to highlight

Label check box, and press ENTER to start editing the label.

5. Press

ENTER

to confirm.

6. Press EXIT to exit the menu.

16

PC

Media

Using the TV Features

Using the Parent Controls

With PARENT CONTROL, you can block television and movie programming based on Movie and

TV ratings.

Password is required to access the PARENTAL CONTROL menu. The default is “0000”.

To manage programs using the US Ratings system:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select

Lock menu, then press ENTER to enter the menu.

3. Enter the password.

4. Press ▲ or ▼to select

System Lock

, then press ◄ or ► to select On.

5. Press ▲ or ▼ to select

US Rating

, then press ► to enter the

US rating submenu.

Movie Rating

1. Press ▲ or ▼ to select

MPAA

, then press ► to enter its submenu.

2. Press ◄ or ► to select your desired MPAA ratings level.

The MPAA ratings level are defined as following:

G (general audience)

PG (parental guidance suggested)

PG-13 (recommended for children 14 years of ageor older)

R (mature audience)

• NC-17 (no one under 17 years of age)

X (adult audience only)

3. Press ENTER

to lock / unlock your selection.

4. Press EXIT to exit the menu.

17

Using the TV Features

TV Rating

1. Press ▲ or ▼ to select

TV Rating

, then press ► to enter its submenu.

2. Press ▲ or ▼ to select your desired TV ratings level and press

◄ or ► to select the desired content check box.

The TV ratings level and content are defined as following:

TV ratings level

TV-Y (all children)

TV-Y7 (older children)

TV-G (general audience)

TV-PG (guidance suggested)

TV-14 (strongly cautioned)

• TV-MA (mature audience)

TV ratings content

D (suggestive dialog)

L (adult language)

S (sexual situations)

V (violence)

FV (fantasy violence)

3. Press ENTER

to lock / unlock your selection.

4. Press EXIT to exit the menu.

To manage programs using the Canada Ratings system:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select

Lock menu, then press ENTER to enter the menu.

3. Enter the password.

4. Press ▲ or ▼to select

System Lock

, then press ◄ or ► to select On.

5. Press ▲ or ▼ to select

Canada Rating

, then press ► to enter the Canada English / Canada French.

18

Using the TV Features

Canada English

1. Press ▲ or ▼ to select

Canada English

, then press ► to enter.

2. Press ◄ or ► to select your desired Canadian English rating level.

The Canadian English rating levels are defined as following:

C (children)

C8+ (children eight years and older)

G (general programming, suit able for all audiences)

PG (parental guidance)

14+ (viewers and older)

18+ (adult programming)

3. Press ENTER

to lock / unlock your selection.

4. Press EXIT to exit the menu.

Canada French

1. Press ▲ or ▼ to select

Canada French

, then press ► to enter.

2. Press ◄ or ► to select your desired Canadian French rating level.

The Canadian French rating levels are defined as following:

G (general)

8 ans+ (children eight years and older)

13 ans+ (not appropriate for children of less than 13 years)

16 ans+ (not appropriate for children of less than 16 years)

18 ans+ (reserved to adults)

3. Press ENTER

to lock / unlock your selection.

4. Press EXIT to exit the menu.

19

Using the TV Features

Changing Password

To change a new password:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select

Lock

menu, then press ENTER to enter the menu.

3. Enter the password.

4. Press ▲ or ▼to select

Change Password

, then press ► to enter its submenu.

5. Enter the old password on

Old PIN.

6. Enter your new password on New PIN.

7. Enter your new password again on

Confirm

.

The screen will return to the Lock menu. This indicates the password has been changed.

8. Press EXIT to exit the menu.

Blocking Selected Input Source

To block the selected input source:

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select

Lock menu, then press ENTER to enter the menu.

3. Enter the password. (Default password is 0000)

4. Press ▲ or ▼ to select

Input Block, then press ENTER to enter its submenu.

5. Press ▲ or ▼ to select the input source that you want to block.

6. Press ENTER

to confirm.

Press ◄ or ► to select (Unblock/Block).

7. Press EXIT to exit the menu.

20

Using the TV Features

Customizing PC Display

Connect the PC and your TV using the VGA cable. See “Personal

Computer” on page 10.

1. Press INPUT to display the Source Select menu.

2. Press ▲ or ▼ to select

PC, then press ENTER

to confirm the setting.

3. Press MENU to display the OSD main menu.

4. Press ◄ or ► to select

Setup menu, then press ENTER to enter the menu.

5. Press ▲ or ▼ to select

PC Settings, then press ENTER to enter its submenu.

6. Press ▲ or ▼ to select

H-Pos, V-Pos, Clock,Phase or Auto, and press ◄ or ► to adjust the setting.

7. Press EXIT to exit the menu.

Using USB Function

Your TV is equipped with a USB connector that enables you to view photos or listen to music stored on a USB storage device.

j USB only supports JPEG and MP3 files.

Multimedia support format

Multimedia

Categories

File

Extension

Decoder

Music *.mp3

MPEG1 Audio LAYERIII

(Not corresponding MP3

Pro)

Photo

*.jpg

Baseline

Notes

Sampling Frequency [KHz] : 32 / 44.1 / 48

Bit Rate [kbit/s]: 32 / 40 / 48 / 56 / 64 / 80 /

96 / 112 / 128 / 160 / 192 / 224 / 256 / 320

/ VBR

Horizontal Max: less than 5000

Vertical Max: less than 5000

Horizontal Min: greater than 8

Vertical Min: greater than 8

1. Plug a USB device to the USB connector on the rear side of the TV.

2. Press INPUT to display the Source Select menu.

3. Press ▲ or ▼ to select

Media, then press ENTER

to confirm the setting. The USB menu appears on the screen.

PC Seettings

Photo Music

4. Press ◄ or ► to select the menu item, then press

ENTER.

5. Press EXIT to return to the previous screen.

21

Using the TV Features

Playing Music

1. Press ◄ or ► to select

Music, then press ENTER.

If there are several folders, press ▲ or ▼ to select the desired folder, then press ENTER to view the subfolder content.

2. Press ▲ or ▼ to select a song, then press

ENTER to play. An automatic playback begins from the selected song.

3. During the playback, do the following:

• To pause the playback, press ◄ or ► to select icon, then press ENTER

. Press ◄ or ► to select

icon, then press ENTER to resume.

• To fast reverse the playback , press ◄ or ► to select

icon, then press ENTER.

• To fast forward the playback, press ◄ or ► to select

icon, then press ENTER.

• To skip to previous song, press ◄ or ► to select icon, then press ENTER.

• To skip to next song, press ◄ or ► to select icon, then press ENTER.

• To stop the playback, press ◄ or ► to select icon, then press ENTER.

• To repeatall the playback, press ◄ or ► to select

icon, then press ENTER.

• To songlist the playback, press ◄ or ► to select icon, then press ENTER.

22

Using the TV Features

Viewing Photos

1. Press ◄ or ► to select

Photo, then press ENTER.

If there are several folders, press ▲ or ▼ to select the desired folder, then press ENTER to view the subfolder content.

2. Press ▲ or ▼ to select a photo, then press

ENTER to view the photo in full screen.

Press EXIT to stop the slide show.

Menu item Description

Slideshow Interval

Set the interval time between each slide displays (3 S / 5 S / 10 S / 30 S /

1 Min / 30 Min).

Slideshow Effect

Select the transition effect between each slide displays (Random / Off /

Wipe Right / Wipe Left / Wipe Up / Wipe Down / Comb Side / Comb

UpDown / Checker / Mosaic / Fade / Blind Right / Blind Left / Blind Up /

Blind Down / Box In / Box Out / Slide in Right / Slide in Left / Slide in Up /

Slide in Down).

Slideshow Repeat

Enable/Disable the slide show repeatition (Off / On).

Slide Mode Set the slide mode option (Order / Random).

Background Music Enables/Disable background music during the slide show (On / Off).

Music Play Mode Set music play mode option (Order / Random / Play One).

Music Play Repeat Enable/Disable the music playback repeatition (Off / On).

Music Auto Play Enable/Disable the automatic music playback (Off / On).

23

Using the TV Features

Adjusting On-Screen Display (OSD) Settings

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select the main menu, then press

ENTER to enter the selected menu.

3. Press ▲ or ▼ to select the menu item, then press ◄ or ► to adjust or select the setting.

When selecting a menu item with a submenu ( ► ► ), press ► or

ENTER to enter its submenu.

(“ ► ► ” will only appear when the menu item is highlighted)

4. Press MENU to return to the previous menu or press EXIT to exit the menu.

Picture Menu

Menu item Description

Picture Mode

Apply a preset picture mode optimized for different viewing conditions (Power Saving /

Standard / Vivid / Soft / User).

Color

Temperature j If Picture Mode is set to User, you can adjust the following settings:

Brightness

: Adjust the brightness setting.

Contrast

: Adjust the difference between the light and dark levels in the picture.

Color

: Adjust the color detail of images.

Tint

: Adjust the picture hue.

Sharpness

: Adjust peaking in detail of the picture.

Apply a preset color temperature setting

(Normal / Warm / Cool).

Advanced

Picture Settings

Set additional picture settings:

Aspect Ratio

: Adjust how the picture fills the screen.(Normal / Wide / Zoom / Cinema)

Noise Reduction: Reduce the noise level.

Dynamic Contrast

: Automatically adjust picture detail and brightness. Press ◄ / ► button to select(Off / On).

• HDMI Mode: Only available in HDMI input.

Press ◄ / ► button to select(Video / Graphic).

24

Using the TV Features

Sound Menu

Menu item Description

Sound Settings

Apply a preset audio option optimized for different sounding conditions (Standard / Music

/ Movie / Sports / User ).

j If Sound Mode is set to User

, you can adjust

MTS

Audio the following settings:

Bass

: Adjust the bass level to your preference.

Treble

: Adjust the treble level to your preference.

Balance

: Adjust the sound balance between the left and right speakers.

Configures the multi-track sound. It is only available in ATV. Press ◄ / ► button to select

(Mono/Stereo/SAP).

Select the language supported by the chosen

Language

Digital Audio

Output

Surround digital channel. It is only available in DTV.

Press ◄ / ► button to select(English / French /

Spanish).

Select the type of digital audio output to an external audio system (Off / PCM / Raw).

Enables or disables surround sound effect.

Sound

AVL Set the auto volume control.

Press ◄ / ► button to select(On/Off)

Time Menu

Menu item

Sleep Timer

Time Zone

Daylight Saving

Time

Description

Allows selection of sleep timer: Off /

5min/10min /15min/ 30min / 60min / 90min /

120min/180min/240min

Allows selection of regional TV systems :

Eastern / Central / Mountain / Pacific / Alaska /

Hawaii /Samoa/ Newfoundland / Atlantic.

When Auto Clock set to ON, this item is availabel to enable daynight aving option or not.

j Only adjustable under DTV channel.

Time Format Select your time format.

Press◄ / ►button to select(12-hour / 24-hour).

Auto Clock

Use to synchronize the display automatically.

j It is only available in DTV.

Press ◄ / ► button to select(On / Off)

Clock Press the OK button to enter the Clock menu.

Get date and time from the code stream of DTV, user can’t modify it manually, set null under non

DTV channel.

25

Using the TV Features

Setup Menu

Menu item Description

Menu Language Select to display all on-screen menus in your language of choice: English / French / Spanish

Transparent

Adjust the transparency of the OSD (on screen display) menu.Press◄ / ►button to select.

(0%,25%,50%,75%,100%.)

OSD Timeout

Adjust the duration of the OSD (on screen display) menu.

Press ◄ / ► button to select.(5 Sec.,15Sec.,30

Sec.,45Sec.,60Sec.)

Closed Caption

Adjust Closed Captioning settings.

j Only available under TV and AV source

CC Mode:

Adjust the bass level to your preference.

Press ◄ / ► button to select(CC Off / CC On / CC OnMute).

Analog CC: Set Closed Captioning for standard(analog) program.Press ◄ / ► button to select(CC1 / CC2 / CC3 / CC4 /

TEXT1 / TEXT2 / TEXT3 / TEXT4).

Digital CC:Set Closed Captioning for digital program. Press ◄ / ► button to select(Off

/ Service1 / Service2 / Service3 / Service4 /

Service5 / Service6).

Option:

Adjust the digital Closed Captioning setting.Press ► button to enter

.

Mode:

Mode:Set the look of digital Closed

Captioning. Automatic uses broadcaster’s style.

Font Style:Select from 8 font styles. Press

◄ / ► button to select(Default / Font 0 /

Font 1 / Font 2 / Font 3 / Font 4 / Font 5 /

Font 6 / Font 7).

Font Size:

Adjust the size of the digital

Closed Captioning font. Press◄ / ► button to select(Default /Normal / Large / Small).

Font Edge Style:

Adjust the edge of the digital Closed Captioning box. Press ◄ /

► button to select(Default / None / Raised /

Depressed / Uniform / Left Shadow / Right

Shadow).

Font Edge Color:

Adjust the color of the digital Closed Captioning box. Press ◄ / ► button to select(Default/ Black / White / Red

/ Green / Blue / Yellow / Magenta / Cyan).

26

Using the TV Features

Setup Menu

Menu item Description

Closed Caption

FG Color: Adjust the color of the digital

Closed Captioning font. Press ◄ / ► button to select(Default/ Black / White / Red /

Green / Blue / Yellow / Magenta / Cyan).

BG Color: Adjust the color of the digital

Closed Captioning font.

FG Opacity:

Adjust the transparency of the digital Closed Captioning font. Press ◄ / ► button to select(Default / Solid / Flashing /

Translucent).

BG Opacity: Adjust the digital Closed

Captioning background transparency. Press

◄ / ► button to select(Default / Solid /

Flashing / Translucent).

Over Scan

Input Labels

Press ◄ / ► button to select(On / Off).

It is only available to enter 1080i/720p/1080p in DTV/Component/HDMI.Default is On. It fixed set to be On in ATV/AV. It fixed set to be Off in

PC/USB.

Create labels for the devices connected to your

TV.

Other Settings

Set the parameter of audio only, no signal power off and no operation power off.

Blue Screen:

To select the transition type required while changing from one channel to another.

Audio Only:

Play the audio with the picture turned off. When you turn the Audio Only on and exit the OSD menu, the panel will be dark; and then press any key to exit the

Audio Only status.

Restore Default

Change power on options or reset TV to factory default.

Setup Wizard

Set the first time installation.

27

Using the TV Features

Lock Menu

Menu item Description

Enter Password Enter your 4-digital password. Default password

Change

Password is 0000,and if forget what you set, please call the service center.

Allows to set the password. Use the function, must enter a four-digit password. The factory password is 0000.

Other Settings Set the parameter of audio only, no signal power off and no operation power off.

Blue Screen: To select the transition type required while changing from one channel to another.

Audio Only: Play the audio with the picture turned off. When you turn the Audio Only on and exit the OSD menu, the panel will be dark; and then press any key to exit the

Audio Only status.

System Lock Lock or unlock the buttons on the TV.

Input Block

US Rating

Block or unblock the input sources.

Restrict movie and TV programs by US Ratings.

Only available when “System Lock” is “on”.

Press ► button to enter.

Canada Rating Restrict movie and TV programs by Canadian

RRT Setting

Ratings.

Only available when “System Lock” is “on”.

Press ► button to enter.

Display an advance V-Chip rating table for

Reset RRT digital channels.

The item is available only When current stream has downloadable rating data.

Reset the RRT to default.

The item is available only When current stream has downloadable rating data.

28

Using the TV Features

Channel Menu (Only available on TV source)

Menu item

Air/Cable

Auto Scan

Description

Allows selection between CATV cable and antenna signal sources: AIR/Cable

Automatically search for channels.

Press ENTER / ► button to enter.

Favorite

Channel List

Show/Hide

Channel

Add channels to create a favorite list.

Press ►button to enter.

Display your program list.

Press ►button to enter.

Show or hide your program list.

Press ►button to enter.

Show the channel number

Numbe r

Channel label Create labels for channels ,up to 7 characters.

PC Menu (Only available on PC source)

Menu item

PC Settings

Description

1. Press MENU to display the OSD main menu.

2. Press ◄ or ► to select

Setup menu, then press ENTER to enter the menu.

3. Press ▲ or ▼ to select PC Settings, then press ENTER to enter its submenu.

• H-Pos: Allows you to adjust the Horizontal

Position of the picture.

V-Pos:

Allows you to adjust the Vertical

Position of the picture.

Clock:Controls the width of the picture based on the VGA mode

Phase:

Allows you to improve focus clarity and image stability.Auto Adjust.

Auto:

Allows to auto synchronize VGA signal.

29

Other Information

Troubleshooting

Please contact ViewSonic service team directly if you have questions, service needs, or require technical assistance related on the use of your television.

Contact ViewSonic Service Team at: http://www.ViewSonic.com

Or call our service team:

United States 1-800-688-6688

Canada 1-866-463-4775

Europe +44 (0) 207 382 8250

Problem

No power

No picture

Strange color, light color, or color misalignment

No sound

Possible Solution

Make sure the AC power cord is properly connected to the wall outlet.

Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.

The TV station may be experiencing problems. Try another channel.

The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.

Make sure that the cable connection to other components are properly installed.

Make sure that setup has been done correctly after connections.

Make sure the correct input is selected and the input signal is compatible.

Ensure that the video cable is securely connected.

The picture may appear dim in a brightly lit room.

Adjust the display settings.

Check the input signal setting.

Check your audio connections to other components are properly installed.

The MUTE button may have been pressed, try pressing this button again.

Check your audio settings, your TV audio may be set to minimum.

Press VOL + on the remote control.

30

Other Information

Problem Possible Solution

Remote control unit does not operate

Make sure the batteries are inserted correctly.

Batteries could be weak or dead. Replace with new batteries.

• Check if there is a fluorescent light illuminated near the remote control sensor.

The path of the remote control beam may be blocked. Make sure the path is clear and that the remote control is aimed at the remote control sensor on the TV.

Press on the remote control to see if you can turn on the TV.

Press MENU on the remote control to see if there is an OSD menu shown on the screen.

Press only one button at a time and it is the correct one for the operation you want to perform.

Unit cannot be operated

Power is cut off suddenly

• External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power of the TV and the AVC System, or unplug the AC cord for 1 to 2 minutes, then replug again.

Make sure the sleep timer is turned off.

Make sure the PC or video signal cable is connected properly.

The internal temperature of the unit has increased. Remove any objects blocking the vent or clean as necessary.

No CATV reception (or no reception above CH13)

Set the correct Signal Type (Air / Cable) on the Channel menu.

CATV is connected improperly or not connected; please check all the CATV connections.

The cable TV service is interrupted; please contact your cable operator.

Adjust the location of the antenna, place it far from roads or sources of interference.

Picture is cut off/with sidebar screen

Make sure the video signal cable is connected properly.

Adjust the Screen Size setting on the Picture menu.

Press ASPECT repeatedly on the remote control to switch to the display mode you prefer.

31

Other Information

Specifications

Model VT2216-L VT1602-L

LCD

(LED Backlight)

Television System

Program Coverage

Input signal

Screen Size

Aspect Ratio

RGB

RF

Video

Audio

21.5” Full HD 60Hz

16:9

15.6” HD 60Hz

16:9

ATSC / 64 & 256 QAM /

NTSC-M

ATSC / 64 & 256 QAM / NTSC-M

VHF : 02~13 UHF : 14~69 DTV : 02-69

CATV : 01~125 CADTV : 01~135

RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh: 31.5-67.5 kHz, fv:59.94-60 Hz

TV system Antenna / NTSC+ATSC, TV cable system /

CATV+Digital cable

1 composite RCA, 1 YPbPr component, 1 HDMI

1 mini-stereo,

2 pair of RCA (L/R) stereo

Compatibility

Speaker Output

Audio Output

Power

Operating conditions

Storage condition

Dimensions

USB

PC

Voltage

Temperature

Humidity

Temperature

Humidity

Physical

(W) x (L) x (H)

JPEG / MP3 Format

Up to 1920 x 1080 (CEA mode) Up to 1366 x 768 (CEA mode)

3W x 2 @ THD=10% (max) 3W x 2 @ THD=10% (max)

1 Earphone jack,

1 Digital Audio out (Coaxial)

1 Earphone jack,

1 Digital Audio out (Coaxial)

AC 100~240V (50/60Hz)

0°C to + 40°C

AC 100~240V (50/60Hz)

0°C to + 40°C

20% to 90% (no condensation) 20% to 90% (no condensation)

-20°C to + 60°C -20°C to + 60°C

20% to 90% (no condensation) 20% to 90% (no condensation)

500 x 341 x 160 mm

(19.68 x 13.43 x 6.3 inches)

(plastic stand)

373.3 x 271.3 x 139.3 mm

(14.7 x 10.7 x 5.5 inches)

(plastic stand)

Weight With stand 3.10 kg (6.83 lbs) 1.31 kg (2.9 lbs)

Without stand 2.84 kg (6.26 lbs) 1.12 kg (2.5 lbs)

UL/cUL, FCC, BETS-7,NRCan, CEC Regulations

Power consumption

On 20 W 10 W

Stand by 0.5 W 0.5 W

Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD TV.

Note:

Product Specifications are subject to change without notice.

32

Other Information

Customer Support

For technical support or product service, see the table below or contact your reseller.

Note: You will need the product serial number.

Use with other Wall-Mount kit may cause instability and possibly result in injury.

To find the perfect mount for VT2756-L/VT2406-L, please browse www.viewsonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775,

Europe +44 (0) 207 382 8250.

Country/Region

United States

Canada

Europe

Latin America

(Argentina)

Website www.viewsonic.com

www.viewsonic.com

T = Telephone

F = FAX

T (Toll-Free)= 1-800-688-6688

T (Toll)= 1-424-233-2530

F= 1-909-468-3757

Email [email protected]

T (Toll-Free)= 1-866-463-4775

T (Toll)= 1-424-233-2533

F= 1-909-468-3757 [email protected]

www.viewsoniceurope.com/uk/support/call-desk/ www.viewsoniceurope.

com www.viewsonic.com/la/ T= 0800-4441185 [email protected]

Latin America

(Chile) www.viewsonic.com/la/ T= 1230-020-7975 [email protected]

Latin America

(Columbia)

Latin America

(Mexico) www.viewsonic.com/la/ www.viewsonic.com/la/

T= 01800-9-157235

T= 001-8882328722 [email protected]

[email protected]

Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS

Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16

Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico

Latin America (Peru) www.viewsonic.com/la/ T= 0800-54565 [email protected]

33

Other Information

Limited Warranty

VIEWSONIC LCD TV

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic LCD TVs are warranted for 3 years for all parts excluding the light source and 3 years for labor from the date of the first customer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1.

Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from: a.

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.

c. Any damage of the product due to shipment.

d. Removal or installation of the product.

e.

Causes external to the product, such as electric power fluctuations or failure.

f.

Use of supplies or parts not meeting ViewSonic’s specifications.

g. Normal wear and tear.

h. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.

4. Removal, installation, and set-up service charges.

5. When you mount it on the wall, the following must be noticed: a. The accessories attached with this product are applicable for this product only.

b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.

c. Wall face may discolor when this product has been mounted on the wall for a long time.

How to get service:

1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer

Support page). You will need to provide your product’s serial number.

2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.

4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

Effect of state law:

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

Sales outside the U.S.A. and Canada:

For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer.

The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.

For users in Europe and Russia, full details of warranty providedcan be found in www.viewsoniceurope.com under Support/

Warranty Information.

4.3: ViewSonic LCD TV Warranty LTV_LW01 Rev. 1C 06-25-07

34

Other Information

Mexico Limited Warranty

VIEWSONIC LCD TV

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic LCD TVs are warranted for 3 years for all parts excluding the light source and 3 years for labor from the date of the first customer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1.

Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from: a.

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Any damage of the product due to shipment.

c.

Causes external to the product, such as electric power fluctuations or failure.

d.

Use of supplies or parts not meeting ViewSonic’s specifications.

e. Normal wear and tear.

f. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.

4. Removal, installation, insurance, and set-up service charges.

How to get service:

For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached

Customer Support page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.

For Your Records

Product Name: ____________________________

Document Number: ________________________

Purchase Date: ____________________________

Model Number: _______________________________

Serial Number: ________________________________

Extended Warranty Purchase? ________________(Y/N)

If so, what date does warranty expire? ______________

1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address,

(d) a description of the problem, and (e) the serial number of the product.

2. Take or ship the product in the original container packaging to an authorized ViewSonic service center

3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

4. Repair or attempted repair by anyone not authorized by ViewSonic.

35

Other Information

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:

Name, address, of manufacturer and importers:

México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,

Col. San Fernando Huixquilucan, Estado de México

Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm

NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004

Hermosillo: Villahermosa:

Distribuciones y Servicios Computacionales SA de CV.

Compumantenimietnos Garantizados, S.A. de C.V.

Calle Juarez 284 local 2

Col. Bugambilias C.P: 83140

Tel: 01-66-22-14-9005

E-Mail: [email protected]

Puebla, Pue. (Matriz):

RENTA Y DATOS, S.A. DE C.V. Domicilio:

29 SUR 721 COL. LA PAZ

72160 PUEBLA, PUE.

Tel: 01(52).222.891.55.77 CON 10 LINEAS

E-Mail: [email protected]

Chihuahua

Soluciones Globales en Computación

C. Magisterio # 3321 Col. Magisterial

Chihuahua, Chih.

Tel: 4136954

E-Mail: [email protected]

Distrito Federal:

AV. GREGORIO MENDEZ #1504

COL, FLORIDA C.P. 86040

Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09

E-Mail: [email protected]

Veracruz, Ver.:

CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas #

419

ENTRE PINZÓN Y ALVARADO

Fracc. Reforma C.P. 91919

Tel: 01-22-91-00-31-67

E-Mail: [email protected]

Cuernavaca

Compusupport de Cuernavaca SA de CV

Francisco Leyva # 178 Col. Miguel Hidalgo

C.P. 62040, Cuernavaca Morelos

Tel: 01 777 3180579 / 01 777 3124014

E-Mail: [email protected]

Guadalajara, Jal.:

QPLUS, S.A. de C.V.

Av. Coyoacán 931

Col. Del Valle 03100, México, D.F.

Tel: 01(52)55-50-00-27-35

E-Mail : [email protected]

Guerrero Acapulco

GS Computación (Grupo Sesicomp)

Progreso #6-A, Colo Centro

39300 Acapulco, Guerrero

Tel: 744-48-32627

SERVICRECE, S.A. de C.V.

Av. Niños Héroes # 2281

Col. Arcos Sur, Sector Juárez

44170, Guadalajara, Jalisco

Tel: 01(52)33-36-15-15-43

E-Mail: [email protected]

Monterrey:

Global Product Services

Mar Caribe # 1987, Esquina con Golfo Pérsico

Fracc. Bernardo Reyes, CP 64280

MERIDA:

ELECTROSER

Av Reforma No. 403Gx39 y 41

Mérida, Yucatán, México CP97000

Tel: (52) 999-925-1916

E-Mail: [email protected]

Tijuana:

STD

Av Ferrocarril Sonora #3780 L-C

Col 20 de Noviembre

Tijuana, Mexico

Monterrey N.L. México

Tel: 8129-5103

E-Mail: [email protected]

Oaxaca, Oax.:

CENTRO DE DISTRIBUCION Y

SERVICIO, S.A. de C.V.

Murguía # 708 P.A., Col. Centro, 68000, Oaxaca

Tel: 01(52)95-15-15-22-22

Fax: 01(52)95-15-13-67-00

E-Mail. [email protected]

FOR USA SUPPORT:

ViewSonic Corporation

381 Brea Canyon Road, Walnut, CA. 91789 USA

Tel: 800-688-6688 (English); 866-323-8056 (Spanish);

Fax: 1-800-685-7276

E-Mail: http://www.viewsonic.com

4.3: ViewSonic Mexico Limited Warranty LTV_LW02 Rev. 1A 06-25-07

36

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Business 54.6 cm (21.5") LCD
  • Full HD 1920 x 1080 pixels 16:9
  • 5 ms 250 cd/m² 1000:1

Related manuals