User manual | COMMERCIAL Geothermal/Water Source Heat Pump 0.75-6 Tons Submittal Data

COMMERCIAL
Geothermal/Water Source Heat Pump
0.75-6 Tons
Submittal Data
English Language/IP Units
SD1200AUB 07/15
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Model Nomenclature
1
2
3
4-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21-22 23
U
S
V
036
T
L
0
0
0
C
A
N
N
A
5
N
0
0
SS
*
Model Type
U – Versatec Ultra
Vintage
* - Factory Use Only
Operation Range
S – Single Stage
Non-Standard Options
SS – Standard
Cabinet Configuration
V – Vertical
H - Horizontal
Drain Pan Option
0 – Composite, No Secondary Connection
1 – Composite, Secondary Connection
2 – Stainless Steel, No Secondary Connection
3 – Stainless Steel, Secondary Connection
Unit Capacity (MBTUH)
009, 012, 015, 018,
023 (Horizontal)
024, 030, 036,
041 (Vertical)
042, 048, 060, 070
Cabinet Option
0 – Unpainted, 1 in MERV 4, Filter Rail
1 – Painted, 1 in MERV 4, Filter Rail
2 – Unpainted, 2 in MERV 13, Filter Rail
3 – Painted, 2 in MERV 13, Filter Rail
4 – Unpainted, 1 in MERV 4, Filter Rack
5 – Painted, 1 in MERV 4, Filter Rack
6 – Unpainted, 2 in MERV 13, Filter Rack
7 – Painted, 2 in MERV 13, Filter Rack
Discharge Configuration
T – Top (Vertical)
E – End (Horizontal)
S – Side (Horizontal)
Phase Guard1
N – No Phase Guard, No Disconnect
P – Phase Guard, No Disconnect
B – Phase Guard, Disconnect
D – No Phase Guard, Disconnect
Return Air Configuration
L – Left
R – Right
Voltage
0 – 208-230/60/1
2 – 265-277/60/1 (009-036)
3 – 208-230/60/3 (023-070)
4 – 460/60/3 (023-070)
5 – 575/60/3 (PSC Only 041-070)
All-Aluminum Air Coil Option
5 – AlumiSealTM/Extended Range
6 – AlumiSeal/Standard Range
7 – No Coating/Extended Range
8 – No Coating/Standard Range
Hot Water Generation Option2
0 – No HWG, No IntelliStart®
2 – HWG w/o Pump, No IntelliStart
(Vertical 015-070)
3 – No HWG, IntelliStart
5 – HWG w/o Pump, IntelliStart
(Vertical 018-070)
Control Option
A – AuroraTM Base Control (ABC)
E – Aurora UPC DDC Controller
F – Aurora UPC DDC Controller with LON
Water Control Option3
N – None
R – Water Flow Regulator (015-070)
V – 2-Way Valve (015-070)
B – 2-Way Valve w/ Water Flow Regulator
(015-070)
W – Waterside Economizer
S – Waterside Economizer w/ Water
Flow Regulator
E – Waterside Economizer w/ 2-Way Valve
C – Waterside Economizer w/ 2-Way Valve &
Water Flow Regulator
Blower Options
0 – PSC Blower
1 – Variable Speed ECM Blower (015-070)
2 – High Static Variable Speed ECM Blower
(042-048)
3 – High Static PSC Blower (024, 030, 042, 048)
4 – 5-Speed ECM Blower (015-070)
Water Coil Option
C – Copper
N – CuproNickel
Refrigeration Option
0 – None
G – Hot Gas Bypass (015-072)
R – Hot Gas Reheat (015-072)
B – Hot Gas Bypass w/Hot Gas Reheat (015-072)
Sound Kit Option
A – None
B – Sound Kit (Not Available on H009-012)
Notes:
1 - Phase Guard Only Available on 208-230/60/3, 460/60/3, and 575/60/3
2 - IntelliStart is not available with Phase Guard
3 – Waterside economizer option must be ordered with stainless steel drain pan and either 5-speed
ECM or variable speed ECM (024-070)
Rev.: 24 April 2015D
Note: See separate manual for economizer option
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
2
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
AHRI Data
PSC Motor
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Water Loop Heat Pump
Flow Rate
Model
gpm
cfm
Cooling
EWT 86°F
Ground Water Heat Pump
Heating
EWT 68°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
Cooling
EWT 59°F
Ground Loop Heat Pump
Heating
EWT 50°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
Cooling
EWT 77°F
Heating
EWT 32°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
009
3.0
350
8,500
12.0
11,500
4.4
10,500
18.2
9,600
3.7
9,100
13.5
7,600
012
3.5
400
10,900
12.7
14,700
4.4
12,500
18.2
12,000
3.8
11,500
14.7
9,600
3.2
015
4.0
500
14,000
15.0
16,500
4.8
16,000
24.0
15,000
4.1
14,700
17.2
11,500
3.5
018
5.0
600
17,600
14.6
21,000
4.7
20,600
23.5
17,500
4.0
18,500
17.0
13,700
3.5
3.4
3.0
023
6.0
800
23,000
14.5
26,000
4.5
25,400
22.5
21,900
3.9
23,900
16.8
17,000
024
6.0
800
23,900
14.6
27,000
4.7
26,400
22.8
22,300
4.0
24,400
17.0
17,500
3.5
030
8.0
1000
29,500
14.9
34,600
4.8
32,900
23.0
28,300
4.0
29,000
17.0
22,800
3.5
036
9.0
1150
33,300
14.4
40,600
4.5
37,700
21.2
33,000
3.9
34,500
16.6
26,000
3.3
041
11.0
1300
40,000
13.8
45,000
4.3
44,500
20.6
36,000
3.8
41,000
15.8
29,000
3.3
042
11.0
1400
40,800
14.5
45,400
4.5
45,800
22.0
37,000
3.8
42,300
16.8
29,900
3.3
048
12.0
1600
47,700
14.7
56,000
4.4
52,000
21.0
45,900
3.8
49,500
16.8
36,900
3.3
060
15.0
1900
58,400
14.7
72,500
4.4
65,500
20.8
58,400
3.8
60,900
16.6
47,100
3.3
070
18.0
2100
63,000
14.2
79,000
4.4
70,000
20.3
64,100
3.8
68,500
15.2
51,600
3.3
12/6/10
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
Variable Speed ECM, or 5-Speed ECM Motor
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Water Loop Heat Pump
Flow Rate
Model
gpm
cfm
Cooling
EWT 86°F
Ground Water Heat Pump
Heating
EWT 68°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
Cooling
EWT 59°F
Ground Loop Heat Pump
Heating
EWT 50°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
Cooling
EWT 77°F
Heating
EWT 32°F
Capacity
EER
Capacity
Btu/h Btu/h/W Btu/h
COP
015
4.0
500
14,000
15.3
16,500
4.9
16,000
24.3
15,000
4.4
14,700
17.5
11,500
3.7
018
5.0
600
17,600
15.2
21,000
4.8
20,600
24.0
17,500
4.4
18,500
17.5
13,700
3.7
023
6.0
800
23,000
15.0
26,000
4.7
25,400
23.0
21,900
4.3
23,900
17.0
17,000
3.6
024
6.0
800
23,900
15.1
27,000
5.0
26,400
23.4
22,300
4.5
24,400
17.5
17,500
3.8
030
8.0
900
29,500
15.7
34,600
5.1
32,900
23.9
28,300
4.4
29,000
18.3
22,800
3.8
036
9.0
1150
33,300
15.0
40,600
4.8
37,700
23.0
33,000
4.3
34,500
17.3
26,000
3.5
041
11.0
1300
40,000
14.5
45,000
4.5
44,500
22.0
36,000
4.0
41,000
16.5
29,000
3.4
042
11.0
1400
40,800
15.6
45,400
5.0
45,800
23.5
37,000
4.3
42,300
18.5
29,900
3.7
048
12.0
1600
47,700
15.5
56,000
4.8
52,000
23.4
45,900
4.2
49,500
18.1
36,900
3.6
060
15.0
1900
58,400
15.3
72,500
4.7
65,500
23.0
58,400
4.0
60,900
17.9
47,100
3.6
070
18.0
2100
63,000
14.3
79,000
4.7
70,000
21.0
64,100
4.0
68,500
16.1
51,600
3.5
12/6/10
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
All Versatec Ultra Series product is safety listed under UL1995 thru ETL and
performance listed with AHRI in accordance with standard 13256-1.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
3
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Vertical Dimensional Data
Standard filter rails for
open return applications
Field installed
duct flange
Deluxe filter rack for
ductable return applications
A
A
N
S
R
Air coil
N
Q
P
B
AIR COIL SIDE
AIR COIL SIDE
Q
P
4
G
3
F
ACCESS
PANEL
B
2' (61 cm)
Alternate
Service Access
4
FRONT
FRONT
1.4 in (3.5 cm)
M
G
3
F
1.4 in (3.5 cm)
M
Top View - Right Return
Top View - Left Return
2' (61 cm)
Service Access Left Return
(Right Return opposite side)
Isometric View - Left Return
T
U
W
Air coil
Air coil
ACCESS
PANEL
ACCESS
PANEL
V
C
C
1.6 in (4.1 cm)
Condensate 3/4 in
PVC glue socket
1.6 in (4.1 cm)
H
E
D
5
6
2
8
L
1
Front View - Right Return
J
Power supply
1 in (25.4 mm)
knockout
Condensate
3/4 in PVC
glue socket
Low voltage
1/2" (12.7 mm)
knockout
1.6 in (4.1 cm)
8
7
L
K
1.6 in
(4.1 cm)
5
6
2
8
1
Front View - Left Return
E
H
J
ACCESS
PANEL
8
7
L
K L
D
Right View - Right Return
Left View - Left Return
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
4
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Vertical Dimensional Data cont.
1
2
Water Connections
3
4
5
D
E
F
G
H
Loop
HWG
In
N/A
N/A
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
HWG
Out
N/A
N/A
2.9
7.4
4.4
11.2
4.4
11.2
2.9
7.4
4.4
11.2
4.4
11.2
4.4
11.2
Condensate
8.8
22.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
Water
FPT
1/2
12.7 mm
3/4
19.1 mm
3/4
19.1 mm
3/4
19.1 mm
3/4
19.1 mm
1
25.4 mm
1
25.4 mm
1
25.4 mm
Overall Cabinet
Vertical
Models
009-012
015-018
024-030
036
041
042-048
060
070
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
Vertical
Models
009-012
015-018
024-030
036
041
042-048
060
070
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
A
B
C
Width
Depth
Height**
In
Out
22.5
57.2
22.5
57.2
22.5
57.2
22.5
57.2
22.5
57.2
25.5
64.8
25.5
64.8
25.5
64.8
22.2
56.4
22.2
56.4
26.2
66.5
26.2
66.5
26.2
66.5
31.2
79.2
31.2
79.2
31.2
79.2
23.7
60.2
36.2
91.9
40.2
102.1
44.2
112.3
44.2
112.3
44.2
112.3
48.2
122.4
52.2
132.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
5.6
14.2
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
M
Filter Rack
Width
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
N
Supply
Width
10.0
25.4
14.0
35.6
14.0
35.6
14.0
35.6
18.0
45.7
18.0
45.7
18.0
45.7
18.0
45.7
Discharge Connection
duct flange installed (±0.10 in)
P
Q
R
Supply
Depth
10.0
6.1
9.4
25.4
15.5
23.9
14.0
4.1
4.3
35.6
10.4
10.9
14.0
6.1
4.5
35.6
15.5
11.4
14.0
6.1
4.5
35.6
15.5
11.4
18.0
4.1
3.9
45.7
10.4
9.9
18.0
6.6
4.6
45.7
16.8
11.7
18.0
6.6
4.6
45.7
16.8
11.7
18.0
6.6
4.6
45.7
16.8
11.7
Electrical Knockouts
6
7
8
S
T
9.4
23.9
7.7
19.6
7.7
19.6
7.7
19.6
3.9
9.9
6.3
16.0
6.3
16.0
6.3
16.0
2.1
5.3
2.1
5.3
2.1
5.3
2.1
5.3
2.1
5.3
1.6
4.1
1.6
4.1
1.6
4.1
Knockout
HWG
Provisions
N/A
N/A
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
J
K
L
1/2 in.
cond
7.4
18.8
9.4
23.9
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
1/2 in.
cond
3.4
8.6
5.4
13.7
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
1 in.
cond
5.4
13.7
7.4
18.8
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
Return Connection*
using deluxe filter rack (±0.10 in)
U
V
W
Return
Return
Depth
Height
18.1
10.0
1.9
46.0
25.4
4.8
18.1
20.0
1.9
46.0
50.8
4.8
22.1
22.1
1.9
56.1
56.1
4.8
22.1
26.1
1.9
56.1
66.3
4.8
22.1
26.1
1.9
56.1
66.3
4.8
28.1
26.0
2.0
71.4
66.0
5.1
28.1
30.0
2.0
71.4
76.2
5.1
28.1
34.0
2.0
71.4
86.4
5.1
11/10/09
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front.
*Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in.
[8.26 cm] from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit.
**Discharge flange is field installed and extends 1 in. (25.4 mm) from top of cabinet.
Vertical Disconnect
When using disconnect, do not use dimension L from
the standard vertical dimensional data. Use dimension
LL from the vertical disconnect dimensional data.
Vertical Models
009-012
015-018
024-030
036
042-048
060
070
Dimensions in inches [cm]
LL
Externally Mounted
18.8 [47.8]
14.3 [36.3]
15.3 [38.9]
14.3 [36.3]
14.3 [36.3]
14.3 [36.3]
02/06/13
Disconnect Located on this
Side for a Right Return
Disconnect
Location
Alternative
Power
Location
Power
Supply
LL
1.8 in.
[4.6 cm]
Vertical Shown in
Left Return Configuration
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
5
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Horizontal Dimensional Data
1.7 in.
[5.3 cm]
Standard filter rails
1 in. [2.5 cm] knockout
0.5 in. [1.3 cm] knockout
Front
Right Return
1.7 in.
[5.3 cm]
Standard filter rails
K
CP
Left Return
Front
AP
J
E
A
AP
D
AP
RR Front View
CMP
CMP
1.7
1.7
2' (61 cm)
Service Access
Condensate
"X" PVC size
AP
E
Deluxe filter rack option shown
2.3 in. [5.8 cm]
P
N
D
K
LR Front View
L
BLOWER
OUTLET
M C
L
AP
= Alternate Service Panel
BP
= Blower Service Panel
CP
= Control Access Panel
C
M
BLOWER
OUTLET
CMP = Compressor Service Panel
H
2.1 in. [5.3 cm]
A
Right Return
End Discharge
Left Return
End Discharge
N
0.5 in. [1.3 cm]
knockout
K
AP
M
BLOWER
OUTLET
J
Q
M
AP
CMP
L
Left Return Side Discharge
Right Return Side Discharge
Air Coil
BP
BLOWER
OUTLET
Front
Front
1 in. [2.5 cm]
knockout
K
J
0.5 in. [1.3 cm]
knockout
CMP
P
N
1.5 in. [3.8 cm]
1.5 in. [3.8 cm]
L
BP
Deluxe filter rack option shown
P
N
2.3 in.
[5.8 cm]
Legend
2.1 in. [5.3 cm]
A
P
Condensate
"X" PVC size
End Discharge
Side Discharge
1 in. [2.5 cm]
knockout
FILTER RACK
AIR COIL SIDE
FILTER RACK
AIR COIL SIDE
0.5 in. [1.3 cm]
knockout
CP
Side Discharge
End Discharge
H
2' (61 cm)
Service Access
J
T
T
S
S
Air Coil
Q
Deluxe filter
rack option
(shown)
FILTER RACK CONNECTION
C
R
C
R
FILTER RACK CONNECTION
Front
Front
B
B
Right Return Side View
Left Return Side View
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
6
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Horizontal Dimensional Data cont.
Water Connections
2
3
E
H
CondOut
ensate
4.8
0.8
12.2
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
Overall Cabinet
A
B
C
1
D
Width
Depth
Height*
In
19.2
48.8
22.5
57.2
22.5
57.2
22.5
57.2
25.5
64.8
25.5
64.8
25.5
64.8
30.9
78.5
42.0
106.7
42.0
106.7
45.0
114.3
48.0
121.9
53.0
134.6
61.0
154.9
11.9
30.2
17.2
43.7
19.2
48.8
19.2
48.8
21.2
53.8
21.2
53.8
21.2
53.8
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
Horizontal
Models
009-012
015-023
024-030
036
042-048
060
070
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
Horizontal
Models
009-012
015-023
024-030
036
042-048
060
070
L
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
2.3
5.8
5.7
14.5
6.7
17.0
6.7
17.0
4.9
12.4
4.9
12.4
4.9
12.4
Discharge Connection
duct flange installed (±0.10 in)
M
N
Supply
Supply
Width
Depth
8.0
10.0
20.3
25.4
10.5
9.4
26.7
23.9
10.5
9.4
26.7
23.9
10.5
9.4
26.7
23.9
13.6
13.2
34.5
33.5
13.6
13.2
34.5
33.5
13.6
13.2
34.5
33.5
Loop
Water FPT
1/2
12.7 mm
3/4
19.05 mm
3/4
19.05 mm
3/4
19.05 mm
1
25.4 mm
1
25.4 mm
1
25.4 mm
Electrical Knockouts
J
K
1/2 in. cond
1 in. cond
Power
Low Voltage
Supply
4.5
4.5
11.4
11.4
7.1
7.1
18.0
18.0
9.2
7.1
23.4
18.0
9.2
7.1
23.4
18.0
9.2
9.1
23.4
23.1
9.2
9.1
23.4
23.1
9.2
9.1
23.4
23.1
Return Connection*
using deluxe filter rack option (±0.10 in)
Q
R
S
T
Return
Return
Depth
Height
15.4
9.4
3.0
1.4
39.1
23.9
7.6
3.6
23.4
14.5
2.0
1.4
59.4
36.8
5.1
3.6
27.4
16.4
2.0
1.5
69.6
41.7
5.1
3.8
30.4
16.4
2.1
1.5
77.2
41.7
5.3
3.8
35.4
18.6
2.4
1.5
89.9
47.2
6.1
3.8
40.4
18.4
2.4
1.5
102.6
46.7
6.1
3.8
45.6
18.6
2.3
1.5
115.8
47.2
5.8
3.8
P
2.3
5.8
4.9
12.4
4.9
12.4
4.9
12.4
4.6
11.7
4.6
11.7
4.6
11.7
PVC Size
X
*Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in.
[8.26 cm] from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit.
Condensate 3/4 in. PVC stub extends from cabinet approximately 1-1/2 in. [38.1 mm]
1/2
1.3
3/4
1.9
3/4
1.9
3/4
1.9
3/4
1.9
3/4
1.9
3/4
1.9
10/29/13
Horizontal Disconnect
When using disconnect, do not use dimension K from the
standard horizontal dimensional data. Use dimension KK from
the horizontal disconnect dimensional data.
Horizontal Models
009-012
015-018
024-030
036
042-048
060
070
Dimensions in inches [cm]
KK
Externally Mounted
8.2 [20.8 ]
9.2 [23.4]
9.2 [23.4]
11.2 [28.4]
10.2 [25.9]
11.2 [28.4]
02/06/13
Disconnect
Location
Disconnect Located
on this Side for a
Left Return
KK
Power Supply
2.1 in.
[5.3 cm]
Horizontal Shown in
Right Return Configuration
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
7
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Hanger Bracket Locations
Right
D
Left
F
Compressor
Section
E
G
Air Handler
Section
C
B
Air Handler
Section
E
G
D
Compressor
Section
F
A
3/8”
Threaded Rod
(not supplied)
Vibration Isolator
Washer
Hex Nuts
(not supplied)
Bolt and
Lockwasher
Hanger Dimensions
Hanger Kit
Part Number
Model
009-012
015-023
024-030
036
042-048
060
070
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
Weight Distribution
Unit Hanger Dimensions
A
B
C
31.7
21.8
18.1
[80.5]
[55.4]
[46.0]
42.8
25.1
21.4
[108.6]
[63.8]
[54.4]
42.8
25.1
21.4
[108.7]
[63.8]
[54.4]
45.8
25.1
21.4
[116.3]
[63.8]
[54.4]
48.8
28.1
24.4
[124.0]
[71.4]
[62.0]
53.8
28.1
24.4
[136.7]
[71.4]
[62.0]
61.8
28.1
24.4
[157.0]
[71.4]
[62.0]
10/29/13
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
Vertical
Shipping
Weight
Horizontal
Shipping
Weight
110
[50]
115
[52]
165
[75]
170
[77]
na
na
230
[104]
240
[109]
265
[120]
275
[125]
285
[129]
290
[132]
335
[152]
380
[172]
120
[54]
125
[57]
175
[79]
180
[82]
185
[84]
245
[111]
255
[116]
285
[129]
na
na
300
[136]
310
[141]
360
[163]
405
[184]
Horizontal Weight Distribution
Front
Back
D
E
F
G
46
23
26
25
[21]
[11]
[12]
[11]
48
24
27
26
[22]
[11]
[12]
[12]
67
34
37
36
[31]
[15]
[17]
[17]
69
35
38
38
[31]
[16]
[17]
[17]
71
36
39
39
[32]
[16]
[18]
[17]
94
47
52
51
[43]
[22]
[24]
[23]
98
49
54
53
[44]
[22]
[25]
[24]
110
55
61
59
[50]
[25]
[28]
[27]
na
na
na
na
na
na
na
na
115
58
64
63
[52]
[26]
[29]
[28]
119
60
66
65
[54]
[27]
[30]
[29]
138
70
77
75
[63]
[32]
[35]
[34]
156
78
86
84
[71]
[36]
[39]
[38]
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
8
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Physical Data
Single Speed
Model
009
012
Compressor (1 each)
015
018
023
024
030
036
Rotary
041
042
048
060
070
Scroll
Factory Charge R-410A, oz [kg]
Vertical
26 [0.74] 32 [0.91] 38 [1.08] 40 [1.13]
Factory Charge R-410A, oz [kg]
Horizontal
24 [0.68] 26 [0.74] 30 [0.85] 32 [0.91] 46 [1.30] 46 [1.30] 56 [1.59] 60 [1.70]
n/a
46 [1.30] 54 [1.53] 56 [1.59] 54 [1.53] 68 [1.93] 76 [2.15] 88 [2.49] 92 [2.61]
n/a
68 [1.93] 76 [2.15] 88 [2.49] 88 [2.49]
Blower Motor & Blower
Blower Motor Type/Speeds
Blower Motor- hp [W]
VS
ECM
Not Available
Variable Speed
PSC
4 Speeds
3 Speeds
5-Spd
ECM
Not Available
5 Speeds
VS
ECM
Not Available
PSC
5-Spd
ECM
Optional - Oversized Blower
Motor - hp [W]
1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373]
1 [746]
1 [746]
1/10 [75] 1/10 [75] 1/6 [134] 1/6 [134] 1/5 [149] 1/5 [149] 1/3 [249] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373]
1 [746]
1 [746]
1 [746]
1 [746]
Not Available
VS
ECM
PSC
5-Spd
ECM
1 [746]
Not Available
PSC
Blower Wheel Size (Dia x W),
in. [mm]
1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373]
VS
ECM
Not Available
Not Available
1/3 [249] 1/2 [373]
Not Available
1 [746]
1 [746]
1 [746]
1 [746]
3/4 [560] 3/4 [560]
Not Available
Not Available
11 x 10
11 x 10
11 x 10
11 x 10
9x7
9x7
9x7
9x7
9x7
9x7
10 x 10
[229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [254 x 254] [279 x 254] [279 x 254] [279 x 254] [279 x 254]
10 x 10
10 x 10
11 x 10
11 x 10
6x8
6x8
9x7
9x7
9x7
9x7
9x7
9x7
10 x 10
[152 x 203] [152 x 203] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [254 x 254] [254 x 254] [254 x 254] [279 x 254] [279 x 254]
Not Available
9x7
9x7
9x7
9x7
9x7
9x7
11 x 10
11 x 10
11 x 10
11 x 10
11 x 10
[229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [279 x 254] [279 x 254] [279 x 254] [279 x 254] [279 x 254]
Coax and Water Piping
Water Connection Size - FPT - in. [mm] 1/2 [12.7] 1/2 [12.7] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1]
HWG Connection Size - FPT - in. [mm]
(Vertical Only)
Coax & Piping Water Volume - gal [l]
Not Available
1 [25.4]
1 [25.4]
1 [25.4]
1 [25.4]
1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7]
0.26 [0.98] 0.3 [1.12] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49] 0.75 [2.83] 0.9 [3.41] 0.9 [3.41] 0.9 [3.41] 1.25 [4.72] 1.5 [5.68] 1.5 [5.68]
Vertical
Air Coil Dimensions (H x W), in. [mm]
12 x 16
12 x 16
22 x 16
22 x 16
[305 x 406] [305 x 406] [559 x 406] [559 x 406]
n/a
24 x 20 24 x 20 28 x 20 28 x 20 28 x 25 28 x 25 32 x 25 36 x 25
[610 x 508] [610 x 508] [711 x 508] [711 x 508] [711 x 635] [711 x 635] [813 x 635] [914 x 635]
Air Coil Total Face Area, ft2 [m2]
1.3 [0.121] 1.3 [0.121] 2.4 [0.220] 2.4 [0.220]
n/a
3.3 [0.310] 3.3 [0.310] 3.9 [0.362] 3.9 [0.362] 4.9 [0.452] 4.9 [0.452] 5.6 [0.516] 6.3 [0.581]
Air Coil Tube Size, in. [mm]
3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
n/a
3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
Air Coil Number of rows
3
3
3
3
n/a
3
3
3
3
3
3
3
3
Filter Standard - 1 in. [25mm] MERV4
Throwaway, in. [mm]
12 x 20
12 x 20
22 x 20 22 x 20
[305 x 508] [305 x 508] [559 x 508] [559 x 508]
n/a
24 x 24 24 x 24 28 x 24 28 x 24 28 x 30 28 x 30 32 x 30 36 x 30
[610 x 610] [610 x 610] [711 x 610] [711 x 610] [711 x 762] [711 x 762] [813 x 762] [914 x 762]
Filter Standard - 2 in. [51mm] Pleated
MERV13 Throwaway, in. [mm]
12 x 20
12 x 20
22 x 20 22 x 20
[305 x 508] [305 x 508] [559 x 508] [559 x 508]
n/a
24 x 24 24 x 24 28 x 24 28 x 24 28 x 30 28 x 30 32 x 30 36 x 30
[610 x 610] [610 x 610] [711 x 610] [711 x 610] [711 x 762] [711 x 762] [813 x 762] [914 x 762]
Horizontal
Air Coil Dimensions (H x W), in. [mm]
10 x 16
10 x 16
16 x 23
16 x 23
16 x 23
18 x 27
18 x 27
18 x 30
[254 x 406] [254 x 406] [406 x 584] [406 x 584] [406 x 584] [457 x 686] [457 x 686] [457 x 762]
n/a
20 x 35 20 x 35 20 x 40 20 x 45
[508 x 889] [508 x 889] [508 x 1016] [508 x 1143]
Air Coil Total Face Area, ft2 [m2]
1.1 [0.103] 1.1 [0.103] 2.6 [0.238] 2.6 [0.238] 2.6 [0.238] 3.4 [0.316] 3.4 [0.316] 3.9 [0.362]
n/a
4.9 [0.452] 4.9 [0.452] 5.6 [0.516] 6.3 [0.581]
Air Coil Tube Size, in. [mm]
3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
n/a
3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
Air Coil Number of rows
3
3
3
3
3
3
3
3
n/a
3
3
3
3
Filter Standard - 1 in. [25mm] MERV 4
Throwaway, in. [mm]
11 x 17
11 x 17
[279 x 432] [279 x 432]
1 - 18 x 14
2 - 18 x 14 2 - 18 x 14 [457 x 356]
[457 x 356] [457 x 356] 1 - 18 x 18
[457 x 457]
n/a
1 - 20 x 20 1 - 20 x 25
2 - 18 x 20 2 - 18 x 20 [508 x 508] [508 x 635]
[457 x 508] [457 x 508] 1 - 20 x 22 1 - 20 x 22
[508 x 559] [508 x 559]
Filter Standard - 2 in. [51mm] Pleated
MERV 13 Throwaway, in. [mm]
11 x 17
11 x 17
16 x 25
16 x 25
16 x 25
18 x 29
18 x 29
18 x 32
[279 x 432] [279 x 432] [406 x 635] [406 x 635] [406 x 635] [457 x 737] [457 x 737] [457 x 813]
n/a
1 - 20 x 20 1 - 20 x 25
20 x 37
20 x 37 [508 x 508] [508 x 635]
[686 x 940] [686 x 940] 1 - 20 x 22 1 - 20 x 22
[508 x 559] [508 x 559]
16 x 25
[406 x
635]
16 x 25
[406 x
635]
16 x 25
[406 x
635]
10/23/13
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
9
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Electrical Availability
PSC
Voltage
Static
Option
208-230/60/1
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
208-230/60/1 w/IntelliStart
265-277/60/1
208-230/60/3 (also w/IntelliStart)
Standard
•
•
•
460/60/3 (also w/IntelliStart)
575/60/3
208-230/60/1
•
•
•
•
•
•
•
208-230/60/1 w/IntelliStart
•
•
265-277/60/1
•
•
•
•
•
•
•
•
•
•
•
208-230/60/3 (also w/IntelliStart)
High
460/60/3 (also w/IntelliStart)
575/60/3
01/22/13
Variable Speed ECM
Voltage
Static
Option
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
208-230/60/1
•
•
208-230/60/1 w/IntelliStart
•
•
•
•
•
•
208-230/60/1
208-230/60/1 w/IntelliStart
265-277/60/1
208-230/60/3 (also w/IntelliStart)
•
Standard
460/60/3 (also w/IntelliStart)
575/60/3
265-277/60/1
208-230/60/3 (also w/IntelliStart)
High
460/60/3 (also w/IntelliStart)
575/60/3
01/22/13
5-Speed ECM
Voltage
Static
Option
208-230/60/1
208-230/60/1 w/IntelliStart
265-277/60/1
208-230/60/3 (also w/IntelliStart)
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
460/60/3 (also w/IntelliStart)
575/60/3
01/22/13
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
10
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Electrical Data
PSC Motor
Model
009
012
015
018
023
024
024*
030
030*
036
041
042
042*
048
048*
060
070
LRA**
Blower
Motor
FLA
Total
Unit
FLA
Min
Circ
Amp
Max
Fuse/
HACR
n/a
n/a
n/a
n/a
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
n/a
46.0
57.0
27.0
n/a
46.0
57.0
27.0
n/a
46.0
69.0
30.0
46.0
69.0
30.0
n/a
60.0
72.0
42.0
n/a
58.0
72.0
42.0
n/a
0.6
0.6
0.6
0.6
1.1
1.0
1.1
1.0
1.2
1.1
1.2
0.6
1.2
1.1
1.2
0.6
1.5
1.5
1.5
1.0
1.5
1.5
1.5
1.0
2.2
2.0
2.2
1.1
2.2
1.1
2.2
1.1
3.5
3.5
1.8
1.4
3.5
3.5
1.8
1.4
4.6
4.6
2.3
1.9
3.5
3.5
1.8
4.6
4.6
2.3
1.9
5.9
5.9
3.0
1.9
5.9
5.9
3.0
1.9
4.7
4.9
5.5
5.1
7.0
6.0
7.8
6.6
14.7
10.1
8.3
4.1
14.7
10.1
8.3
4.1
15.0
10.5
8.6
4.5
15.6
12.7
10.4
5.2
16.3
13.2
11.1
5.3
19.5
13.3
15.0
7.5
23.5
16.3
8.2
6.8
23.5
16.3
8.2
6.8
24.6
17.4
8.7
7.3
24.5
19.5
9.5
25.6
20.6
10.0
8.3
32.3
23.5
11.3
9.3
36.0
23.2
12.6
9.9
5.7
6.0
6.7
6.2
8.5
7.2
9.5
8.0
18.1
12.4
10.1
5.0
18.1
12.4
10.1
5.0
18.4
12.8
10.4
5.4
19.1
15.5
12.6
6.3
19.8
16.0
13.3
6.4
23.8
16.3
18.2
9.1
28.5
19.5
9.8
8.2
28.5
19.5
9.8
8.2
29.6
20.6
10.3
8.7
29.8
23.5
11.4
30.9
24.6
11.9
9.9
38.8
27.9
13.4
11.2
43.5
27.5
15.0
11.9
10/15
10/15
10/15
10/15
10/15
10/15
15
10/15
30
20
15
10/15
30
20
15
10/15
30
20
15
10/15
30
25
20
10/15
30
25
20
10/15
40
20
30
15
45
30
15
10/15
45
30
15
10/15
45
30
15
10/15
50
35
15
50
40
15
15
60
45
20
15
70
40
20
15
Compressor
Rated
Voltage
Voltage
Min/Max
MCC
RLA
LRA
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
6.4
6.7
7.7
7.0
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
8.5
31.0
20.0
10.0
8.5
31.0
20.0
10.0
8.5
32.0
25.0
12.0
32.0
25.0
12.0
10.0
41.0
27.5
13.0
11.5
47.0
28.0
15.0
12.5
4.1
4.3
4.9
4.5
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
5.4
20.0
12.8
6.4
5.4
20.0
12.8
6.4
5.4
21.0
16.0
7.7
21.0
16.0
7.7
6.4
26.3
17.6
8.3
7.4
30.1
17.3
9.6
8.0
21.0
22.0
25.0
22.0
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
38.0
115.0
95.0
45.0
38.0
115.0
95.0
45.0
38.0
115.0
115.0
50.0
115.0
115.0
50.0
40.0
150.0
120.0
70.0
53.0
145.0
120.0
70.0
53.0
05/21/13
HACR circuit breaker in USA only
* With optional high-static PSC motor
** With optional IntelliStartTM
NOTE: High-static option not available on all model sizes.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
11
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Electrical Data cont.
Variable Speed ECM Motor
Model
015
018
023
024
030
036
041
042
042*
048
048*
060
070
Compressor
Rated
Voltage
Voltage
Min/Max
MCC
RLA
LRA
LRA**
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
32.0
25.0
12.0
32.0
25.0
12.0
41.0
27.5
13.0
47.0
28.0
15.0
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
21.0
16.0
7.7
21.0
16.0
7.7
26.3
17.6
8.3
30.1
17.3
9.6
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
115.0
50.0
115.0
115.0
50.0
150.0
120.0
70.0
145.0
120.0
70.0
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
69.0
30.0
46.0
69.0
30.0
60.0
72.0
42.0
58.0
72.0
42.0
HACR circuit breaker in USA only
* With optional 1 HP ECM motor
** With optional IntelliStartTM
Blower
Motor
FLA
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.0
4.1
4.0
4.0
4.1
7.0
7.0
6.9
4.0
4.0
4.1
7.0
7.0
6.9
7.0
7.0
6.9
7.0
7.0
6.9
Total
Unit
FLA
9.9
9.1
10.7
9.7
17.5
13.1
11.1
7.6
17.5
13.1
11.1
7.6
18.1
15.3
12.9
8.3
21.3
16.3
16.8
10.5
24.0
16.8
10.5
24.0
16.8
10.5
27.0
19.8
13.3
25.0
20.0
11.8
28.0
23.0
14.6
33.3
24.6
15.2
37.1
24.9
16.5
Min
Circ
Amp
11.4
10.3
12.4
11.1
20.9
15.4
12.9
8.5
20.9
15.4
12.9
8.5
21.6
18.1
15.1
9.4
25.6
19.3
20.0
12.1
29.0
20.0
12.1
29.0
20.0
12.1
32.0
23.0
14.9
30.3
24.0
13.7
33.3
27.0
16.5
39.9
29.0
17.3
44.6
29.4
18.9
Max
Fuse/
HACR
15
15
15
15
30
20
15
10/15
30
20
15
10/15
35
25
20
10/15
40
30
30
15
45
30
15
45
30
15
50
35
20
50
40
20
50
40
20
60
45
25
70
45
25
05/21/13
CAUTION: When installing a unit with a variable speed ECM blower motor in 460/60/3 voltage, a neutral wire is required to
allow proper unit operation.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
12
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Electrical Data cont.
5-Speed ECM Motor
Model
015
018
023
024
030
036
041
042
048
060
070
Compressor
Rated Voltage
Voltage
Min/Max
MCC
RLA
LRA
LRA**
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
32.0
25.0
12.0
41.0
27.5
13.0
47.0
28.0
15.0
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
21.0
16.0
7.7
26.3
17.6
8.3
30.1
17.3
9.6
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
115.0
50.0
150.0
120.0
70.0
145.0
120.0
70.0
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
69.0
30.0
60.0
72.0
42.0
58.0
72.0
42.0
HACR circuit breaker in USA only
** With optional IntelliStartTM
Blower
Motor
FLA
4.1
3.6
4.1
3.6
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
Total
Unit
FLA
10.0
8.6
10.8
9.2
17.6
12.6
11.2
5.6
17.6
12.6
11.2
5.6
18.2
14.8
13.0
6.3
21.4
15.8
16.9
8.5
27.6
20.4
10.4
27.6
20.4
10.4
28.6
23.6
11.7
33.9
25.2
12.3
37.7
24.9
13.6
Min
Circ
Amp
11.5
9.9
12.5
10.6
21.0
14.9
13.0
6.5
21.0
14.9
13.0
6.5
21.7
17.6
15.2
7.4
25.7
18.9
20.1
10.1
32.6
23.6
12.0
32.6
23.6
12.0
33.9
27.6
13.6
40.5
29.6
14.4
45.2
29.2
16.0
Max
Fuse/
HACR
15
10/15
15
15
30
20
20
10/15
30
20
20
10/15
35
25
20
10/15
40
30
30
15
50
30
15
50
30
15
50
40
20
60
45
25
70
45
25
05/21/13
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
13
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Blower Performance Data
Standard PSC Motor
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
Blower
Spd
H
MH
ML*
L
H
MH*
ML
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
Blower
Size
Motor
hp
6x8
1/10
6x8
1/10
9x7
1/6
9x7
1/6
9x7
1/5
9x7
1/5
9x7
1/3
9x7
1/2
10x10
1/2
10 x 10
1/2
10 x 10
1/2
11 x 10
1
11 x 10
1
0
530
475
435
370
530
475
435
370
875
760
630
875
760
630
1020
960
720
1065
880
805
1240
1095
860
1360
1205
1070
1655
1470
1150
1705
1485
1180
1930
1580
1180
2360
2165
1965
2450
2215
2005
0.05
515
460
420
355
515
460
420
355
860
750
620
860
750
620
990
840
700
1045
865
790
1220
1085
860
1340
1190
1060
1635
1455
1140
1685
1475
1165
1910
1565
1170
2330
2130
1940
2435
2190
1990
0.10
500
450
410
340
500
450
410
340
845
740
610
845
740
610
960
820
680
1030
850
780
1200
1080
855
1320
1170
1050
1615
1445
1130
1665
1465
1150
1885
1550
1160
2300
2095
1920
2420
2170
1975
0.15
485
435
395
325
485
435
395
325
830
730
600
830
730
600
930
800
650
1005
830
765
1175
1060
850
1290
1145
1035
1590
1425
1110
1645
1445
1135
1860
1535
1140
2270
2070
1900
2395
2155
1960
0.20
470
420
380
310
470
420
380
310
820
720
590
820
720
590
900
780
640
975
815
745
1150
1045
850
1260
1120
1020
1570
1410
1090
1625
1430
1120
1830
1525
1120
2240
2050
1885
2370
2140
1950
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
0.60
450
430
405
385
355
330
405
385
365
345
320
300
365
345
325
300
290
275
450
430
405
385
355
330
405
385
365
345
320
300
365
345
325
300
290
275
805
790
770
750
725
700
710
700
680
660
640
620
580
570
560
550
520
490
805
790
770
750
725
700
710
700
680
660
640
620
580
570
560
550
520
490
870
850
830
800
770
690
760
740
720
690
670
620
600
580
570
550
950
925
900
870
835
800
795
775
750
725
700
670
725
710
685
660
630
600
1110
1080
1055
1030
975
920
840
1020
995
960
925
885
850
785
845
845
825
805
775
750
680
1220
1185
1130
1080
1045
1010
910
1085
1050
1015
980
940
900
845
995
970
940
910
875
840
780
1535
1500
1425
1350
1270
1185
1080
1380
1350
1285
1240
1205
1170
905
1050
1010
970
930
900
865
800
1595
1565
1530
1500
1450
1405
1260
1410
1390
1350
1315
1260
1210
1110
1090
1060
1030
1000
965
920
855
1790
1750
1710
1665
1620
1580
1280
1505
1485
1445
1410
1310
1215
1130
1100
1080
1050
1020
970
930
875
2215
2190
2160
2130
2095
2060
1985
2030
2010
1985
1965
1930
1900
1850
1870
1855
1825
1800
1780
1760
1720
2340
2310
2280
2250
2225
2200
2040
2120
2095
2070
2045
2015
1990
1940
1940
1925
1910
1890
1865
1845
1780
0.70
730
675
855
970
1140
1010
1235
1030
1920
1775
1625
2000
1876
1710
0.80
1855
1700
1530
1950
1795
1565
0.90
-
1.00
-
7/6/10
Factory settings are in Bold
Airflow values are with dry coil and standard filter
For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]).
Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg.
Optional High Static PSC Motor
Model
Blower
Spd
Blower
Size
Motor
hp
H
024
030
042
048
M
9x7
1/3
Airflow (cfm) at External Static Pressure (in. wg)
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.60
0.70
0.80
0.90
1240
1220
1200
1175
1150
1110
1080
1055
1030
975
920
840
730
-
-
1.00
-
1095
1085
1080
1060
1045
1020
995
960
925
885
850
785
675
-
-
-
L
860
860
855
850
850
845
845
825
805
775
750
680
-
-
-
H
1340
1320
1300
1270
1240
1200
1160
1115
1070
1025
985
880
-
-
-
-
1185
1175
1165
1130
1095
1065
1035
1000
965
920
880
795
-
-
-
-
M
9x7
1/2
L
1050
1040
1030
1015
1000
980
960
925
895
855
815
-
-
-
-
H
2095
2080
2060
2020
1980
1950
1920
1880
1840
1780
1725
1550
1335
1120
-
-
1960
1940
1920
1890
1865
1830
1800
1760
1725
1670
1620
1435
1300
-
-
-
M
10 x 10
3/4
L
1800
1780
1760
1740
1725
1695
1670
1625
1585
1525
1465
1300
1200
-
-
H
2095
2080
2060
2020
1980
1950
1920
1880
1840
1780
1725
1550
1335
1120
-
-
1960
1940
1920
1890
1865
1830
1800
1760
1725
1670
1620
1435
1300
-
-
-
1800
1780
1760
1740
1725
1695
1670
1625
1585
1525
1465
1300
1200
-
-
-
M
10 x 10
L
3/4
7/6/10
Factory settings are in Bold
Airflow values are with dry coil and standard filter
For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]).
Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg.
* Setting for 265 V operation.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
14
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Blower Performance Data cont.
Variable Speed ECM Motor
Model
Max
esp
015
0.50
018
0.50
023
0.50
024
0.50
030
0.50
036
0.50
041
0.50
042
0.50
042
w/1hp*
0.75
048
0.50
048
w/1hp*
0.75
060
0.75
070
0.75
1
300
L
300
2
400
400
L
400
400
400
3
500
M
500
500
L
500
L
500
L
4
600
H
600
M
600
M
600
M
600
600
650
750
650
750
800
L
650
1000
M
750
800
750
1000
L
900
800
950
850
L
850
L
1100
850
1100
1000
1100
L
950
950
1300
H
950
1300
M
1200
L
1300
Airflow DIP Switch Settings
5
6
7
8
700
700
H
700
9
10
11
12
800
800
H
800
H
800
700
700
M
700
L
1050
M
1050
M
1500
900
1000
1100
1200
900
1000
1100
1200
1000
1100
1200
1000
1100
H
1375
1150
1225
1300
1150
900
H
900
M
1250
1475
1550
1600
1150
1250
1375
1475
1550
1600
1600
1800
1150
1325
1375
1475
1550
H
1600
1600
1250
M
1800
1600
1700
2000
2200
2300
2400
1750
M
1950
1850
H
2100
H
800
1050
L
1500
H
1400
M
1500
1325
H
1325
H
2300
11/10/09
Factory settings are at recommended L-M-H DIP switch locations.
Shaded regions are recommended for best performance. It is acceptable to operate outside of this area as long as the WSHP operates within the
guidlines of the Operating Limits table and Correction Factor tables.
Lowest and Highest DIP switch settings are assumed to be L and H respectively.
CFM is controlled within ±5% up to the maximum esp.
Max esp includes allowance for wet coil and standard filter
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
15
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Blower Performance Data cont.
5-Speed ECM Motor
Model
015
018
023
024
030
036
041
042
048
060
070
Motor
Speed
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
Motor Blower
Tap
Size
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
Motor
HP
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
11 x 10
1
11 x 10
1
11 x 10
1
11 x 10
1
11 x 10
1
0
915
805
725
695
655
915
805
725
695
655
980
890
830
780
625
980
890
830
780
625
1340
1130
1030
960
790
1370
1265
1160
1110
825
1840
1730
1630
1550
1380
1840
1730
1630
1550
1380
2060
1880
1790
1670
1430
2400
2180
2080
1930
1750
2400
2180
2080
1930
1750
0.05
895
785
715
675
600
895
785
715
675
600
960
878
815
760
593
960
878
815
760
593
1310
1115
1005
945
765
1345
1253
1143
1095
803
1825
1713
1610
1520
1340
1825
1713
1610
1520
1340
2045
1860
1770
1650
1405
2360
2160
2050
1920
1735
2360
2160
2050
1920
1735
0.10
880
765
700
650
550
880
765
700
650
550
940
865
800
740
560
940
865
800
740
560
1280
1100
980
930
740
1320
1240
1125
1080
780
1810
1695
1590
1490
1300
1810
1695
1590
1490
1300
2030
1840
1750
1630
1380
2330
2140
2020
1910
1720
2330
2140
2020
1910
1720
0.15
865
750
680
630
530
865
750
680
630
530
930
845
788
703
535
930
845
788
703
535
1240
1085
965
915
725
1285
1220
1113
1065
770
1790
1670
1563
1465
1275
1790
1670
1563
1465
1275
2015
1825
1730
1605
1353
2315
2130
2010
1893
1698
2315
2130
2010
1893
1698
0.20
850
740
660
610
508
850
740
660
610
508
920
825
775
665
510
920
825
775
665
510
1200
1070
950
900
710
1250
1200
1100
1050
760
1770
1645
1535
1440
1250
1770
1645
1535
1440
1250
2000
1810
1710
1580
1325
2300
2120
2000
1875
1675
2300
2120
2000
1875
1675
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
0.60
830
815
805
795
775
750
730
725
705
685
665
655
635
605
635
615
600
585
560
535
485
590
575
550
525
490
455
490
475
435
395
350
830
815
805
795
775
750
730
725
705
685
665
655
635
605
635
615
600
585
560
535
485
590
575
550
525
490
455
490
475
435
395
350
905
890
875
860
840
820
800
813
800
785
770
753
735
710
755
735
723
710
690
670
640
653
640
620
600
585
570
495
480
455
430
410
390
905
890
875
860
840
820
800
813
800
785
770
753
735
710
755
735
723
710
690
670
640
653
640
620
600
585
570
495
480
455
430
410
390
1170
1140
1095
1050
1015
980
900
1057
1044
1022
1000
970
940
870
935
920
900
880
870
860
830
885
870
855
840
825
810
790
690
670
660
650
630
610
580
1220
1190
1158
1125
1085
1045
960
1175
1150
1120
1090
1053
1015
1085
1070
1055
1040
1020
1000
1038
1025
1008
990
980
970
740
720
705
690
670
650
1745
1720
1700
1680
1660
1640
1600
1623
1600
1575
1550
1535
1520
1480
1513
1490
1470
1450
1425
1400
1370
1415
1390
1370
1350
1330
1310
1260
1225
1200
1175
1150
1125
1100
1030
1745
1720
1700
1680
1660
1640
1600
1623
1600
1575
1550
1535
1520
1480
1513
1490
1470
1450
1425
1400
1370
1415
1390
1370
1350
1330
1310
1260
1225
1200
1175
1150
1125
1100
1030
1970
1940
1925
1910
1890
1870
1830
1785
1760
1740
1720
1705
1690
1640
1685
1660
1640
1620
1600
1580
1550
1555
1530
1510
1490
1470
1450
1410
1303
1280
1255
1230
1210
1190
1130
2290 2285
2275
2265 2250 2230 2200
2105
2090 2075 2060 2045 2030 2000
1985
1970
1955
1940
1925
1910
1870
1863
1850
1833
1815
1798
1780
1740
1658
1640
1620
1600
1583
1565
1525
2290 2285
2275
2265 2250 2230 2200
2105
2090 2075 2060 2045 2030 2000
1985
1970
1955
1940
1925
1910
1870
1863
1850
1833
1815
1798
1780
1740
1658
1640
1620
1600
1583
1565
1525
0.70
695
535
695
535
745
665
600
745
665
600
800
780
750
740
500
1570
1440
1330
1220
980
1570
1440
1330
1220
980
1800
1610
1510
1370
1070
2165
1960
1840
1700
1490
2165
1960
1840
1700
1490
0.80
640
640
1530
1390
1290
1180
820
1530
1390
1290
1180
820
1750
1570
1460
1340
925
2110
1930
1800
1660
1450
2110
1930
1800
1660
1450
0.90
1480
1350
1480
1350
1740
1535
2080
1890
1760
1620
1410
2080
1890
1760
1620
1410
1.00
2030
1850
1720
1590
1350
2030
1850
1720
1590
1350
01/23/13
Factory settings are in Bold
Airflow values are with dry coil and standard 1 in. filter
ISO/AHRI rating point on the US*070 will require moving the red wire on the motor to high speed (tap 5) and disconnecting the tan wire from tap 5.
Setting Blower Speed - 5-Speed ECM
5-speed ECM blower motors have five (5) speeds of
which three (3) are selectable on single speed and four
(4) are selectable on dual capacity.
5-Speed ECM
Motor Connections
CAUTION: Disconnect all power before
performing this operation.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
16
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Operating Limits
Operating Limits
Cooling
(°F)
(°C)
Air Limits
Min. Ambient Air
45
Rated Ambient Air
80
Max. Ambient Air
100
Min. Entering Air
50
Rated Entering Air db/wb 80.6/66.2
Max. Entering Air db/wb
110/83
Water Limits
Min. Entering Water
30
Normal Entering Water
50-110
Max. Entering Water
120
Heating
(°F)
(°C)
7.2
26.7
37.8
10.0
27/19
43/28.3
45
70
85
40
68
80
7.2
21.1
29.4
4.4
20.0
26.7
-1.1
10-43.3
48.9
20
30-70
90
-6.7
-1.1
32.2
NOTE: Minimum/maximum limits are only for start-up conditions, and
are meant for bringing the space up to occupancy temperature. Units
are not designed to operate at the minimum/maximum conditions on
a regular basis. The operating limits are dependant upon three primary
factors: 1) water temperature, 2) return air temperature, and 3) ambient
temperature. When any of the factors are at the minimum or maximum
levels, the other two factors must be at the normal level for proper and
reliable unit operation.
Definitions
ABBREVIATIONS AND DEFINITIONS:
cfm
EWT
gpm
WPD
EAT
=
=
=
=
=
HC
TC
SC
kW
HR
=
=
=
=
=
HE = total heat of extraction, MBtu/h
HWC = hot water generator capacity, MBtu/h
EER = Energy Efficient Ratio
= BTU output/Watt input
COP = Coefficient of Performance
= Btu output/Btu input
LWT = leaving water temperature, °F
LAT = leaving air temperature, °F
TH
= total heating capacity, MBtu/h
LC
= latent cooling capacity, MBtu/h
S/T = sensible to total cooling ratio
airflow, cubic feet/minute
entering water temperature, Fahrenheit
water flow in gallons/minute
water pressure drop, psi and feet of water
entering air temperature, Fahrenheit
(dry bulb/wet bulb)
air heating capacity, MBtu/h
total cooling capacity, MBtu/h
sensible cooling capacity, MBtu/h
total power unit input, kilowatts
total heat of rejection, MBtu/h
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
17
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Correction Factor Tables
Cooling
(°F)
(°C)
Operating Limits
Air Limits
Min. Ambient Air
45
Rated Ambient Air
80
Max. Ambient Air
100
Min. Entering Air
50
Rated Entering Air db/wb 80.6/66.2
Max. Entering Air db/wb
110/83
Water Limits
Min. Entering Water
30
Normal Entering Water
50-110
Max. Entering Water
120
Heating
(°F)
(°C)
7.2
26.7
37.8
10.0
27/19
43/28.3
45
70
85
40
68
80
7.2
21.1
29.4
4.4
20.0
26.7
-1.1
10-43.3
48.9
20
30-70
90
-6.7
-1.1
32.2
NOTE: Minimum/maximum limits are only for start-up conditions, and
are meant for bringing the space up to occupancy temperature. Units
are not designed to operate at the minimum/maximum conditions on
a regular basis. The operating limits are dependent upon three primary
factors: 1) water temperature, 2) return air temperature, and 3) ambient
temperature. When any of the factors are at the minimum or maximum
levels, the other two factors must be at the normal level for proper and
reliable unit operation.
Cooling Capacity Corrections
Entering
Air WB ºF
Total
Clg Cap
55
60
65
66.2
67
70
75
0.898
0.912
0.967
0.983
1.000
1.053
1.168
60
0.723
65
0.866
0.632
Sensible Cooling Capacity Multipliers - Entering DB ºF
70
75
80
80.6
85
90
1.048
1.185
*
*
*
*
0.880
1.078
1.244
1.260
*
*
0.694
0.881
1.079
1.085
1.270
*
0.655
0.842
1.040
1.060
1.232
*
1.000
0.616
0.806
1.023
1.193
1.330
0.693
0.879
0.900
1.075
1.250
0.687
0.715
0.875
1.040
95
*
*
*
*
*
1.404
1.261
100
*
*
*
*
*
*
1.476
Power
Input
Heat of
Rejection
0.985
0.994
0.997
0.999
1.000
1.003
1.007
0.913
0.927
0.972
0.986
1.000
1.044
1.141
11/10/09
NOTE: * Sensible capacity equals total capacity at conditions shown.
Heating Corrections
Ent Air DB °F
45
50
55
60
65
68
70
75
80
Htg Cap
1.062
1.050
1.037
1.025
1.012
1.005
1.000
0.987
0.975
Power
0.739
0.790
0.842
0.893
0.945
0.976
1.000
1.048
1.099
Heat of Ext
1.158
1.130
1.096
1.064
1.030
1.012
1.000
0.970
0.930
11/10/09
Airflow Corrections
Airflow
cfm Per Ton
% of Nominal
of Clg
240
60
275
69
300
75
325
81
350
88
375
94
400
100
425
106
450
113
475
119
500
125
520
130
Cooling
Heating
Total Cap
Sens Cap
Power
Heat of Rej
Htg Cap
Power
0.922
0.944
0.959
0.971
0.982
0.992
1.000
1.007
1.012
1.017
1.019
1.020
0.786
0.827
0.860
0.894
0.929
0.965
1.000
1.034
1.065
1.093
1.117
1.132
0.910
0.924
0.937
0.950
0.964
0.982
1.000
1.020
1.042
1.066
1.092
1.113
0.920
0.940
0.955
0.967
0.978
0.990
1.000
1.010
1.018
1.026
1.033
1.038
0.943
0.958
0.968
0.977
0.985
0.993
1.000
1.007
1.013
1.018
1.023
1.026
1.150
1.105
1.078
1.053
1.031
1.014
1.000
0.990
0.983
0.980
0.978
0.975
Heat of Ext
0.893
0.922
0.942
0.959
0.973
0.988
1.000
1.011
1.020
1.028
1.034
1.038
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
18
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Antifreeze Corrections
Catalog performance can be corrected for antifreeze use. Please use the following table and note the example given.
Antifreeze
% by wt
Antifreeze Type
EWT - degF [DegC]
Water
Ethylene Glycol
Propylene Glycol
Ethanol
Methanol
Cooling
Capacity
Heating
Capacity
Pressure Drop
90 [32.2]
30 [-1.1]
30 [-1.1]
0
1.000
1.000
1.000
10
0.991
0.973
1.075
20
0.979
0.943
1.163
30
0.965
0.917
1.225
40
0.955
0.890
1.324
50
0.943
0.865
1.419
10
0.981
0.958
1.130
20
0.969
0.913
1.270
30
0.950
0.854
1.433
40
0.937
0.813
1.614
50
0.922
0.770
1.816
10
0.991
0.927
1.242
20
0.972
0.887
1.343
30
0.947
0.856
1.383
40
0.930
0.815
1.523
50
0.911
0.779
1.639
10
0.986
0.957
1.127
20
0.970
0.924
1.197
30
0.951
0.895
1.235
40
0.936
0.863
1.323
50
0.920
0.833
1.399
Warning: Gray area represents antifreeze concentrations greater than 35% by weight and
should be avoided due to the extreme performance penalty they represent.
Antifreeze Correction Example
Antifreeze solution is Propylene Glycol 20% by weight. Determine the corrected heating and cooling performance at 30°F
and 90°F respectively as well as pressure drop at 30°F for a Versatec Ultra Series US*024-PSC.
The corrected cooling capacity at 90°F would be: 24,500 Btu/h x 0.969 = 23,740 Btu/h
The corrected heating capacity at 30°F would be: 19,000 Btu/h x 0.913 = 17,347 Btu/h
The corrected pressure drop at 30°F and 6 gpm would be: 10.5 ft. hd x 1.270 = 13.34 ft. hd.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
19
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Pressure Drop
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
gpm
Pressure Drop (psi)
30°F
50°F
70°F
90°F
110°F
Valve
gpm
Cv
Pressure
Drop (psi)
1.5
2.0
1.7
1.4
1.3
1.0
1.5
9.6
0.02
2.0
3.8
3.2
2.8
2.3
1.8
2.0
9.7
0.04
3.0
7.2
6.0
5.1
4.5
4.0
3.0
9.9
0.09
4.0
12.0
10.0
9.0
7.5
6.0
4.0
10.1
0.16
1.5
1.1
1.0
0.9
0.8
0.7
1.5
9.6
0.02
0.06
2.5
2.5
2.3
2.1
1.8
1.5
3.5
3.9
3.6
3.2
2.7
2.3
4.5
5.3
4.9
4.5
3.8
3.5
1/2 in.
1/2 in.
2.5
9.8
3.5
10.0
0.12
4.5
10.2
0.19
2.0
0.6
0.5
0.5
0.4
0.4
2.0
9.7
0.04
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.0
1.9
1.8
1.6
1.5
1.3
4.0
10.1
0.16
5.0
3.3
3.2
3.0
2.9
2.7
5.0
10.4
0.23
0.09
1/2 in.
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
4.0
1.9
1.8
1.6
1.5
1.3
4.0
10.1
0.16
5.0
3.3
3.2
3.0
2.9
2.7
5.0
10.4
0.23
6.0
4.5
4.4
4.3
4.1
4.0
6.0
10.6
0.32
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.5
2.4
2.2
2.1
2.0
1.9
6.0
4.5
4.4
4.3
4.1
4.0
8.0
6.7
6.6
6.5
6.3
3.0
1.1
1.0
0.9
0.8
1/2 in.
4.5
10.2
0.19
6.0
10.6
0.32
6.2
8.0
11.0
0.53
0.6
3.0
9.9
0.09
4.5
2.4
2.2
2.1
2.0
1.9
6.0
4.5
4.4
4.3
4.1
4.0
3/4 in.
3/4 in.
4.5
10.2
0.19
6.0
10.6
0.32
0.53
8.0
6.7
6.6
6.5
6.3
6.2
8.0
11.0
4.0
0.9
0.8
0.7
0.6
0.5
4.0
10.1
0.16
6.0
1.9
1.8
1.7
1.6
1.5
6.0
10.6
0.32
8.0
3.7
3.6
3.5
3.4
3.3
8.0
11.0
0.53
10.0
4.8
4.7
4.6
4.5
4.4
10.0
11.5
0.76
5.0
1.4
1.1
0.9
0.7
0.5
5.0
10.4
0.23
7.0
10.8
0.42
9.0
11.2
0.64
3/4 in.
7.0
2.5
2.3
2.1
1.8
1.6
9.0
6.0
5.8
5.5
5.3
5.1
12.0
6.6
6.4
6.2
6.0
5.7
12.0
11.9
1.02
5.0
1.5
1.2
0.9
0.5
0.4
5.0
10.4
0.23
8.0
3.4
3.1
2.8
2.5
2.1
8.0
11.0
0.53
11.0
7.9
7.5
7.2
6.9
6.6
11.0
11.7
0.89
14.0
9.1
8.8
8.5
8.2
7.9
14.0
12.3
1.29
5.0
1.5
1.2
0.9
0.5
0.4
5.0
15.9
0.10
3/4 in.
3/4 in.
8.0
16.6
0.23
11.0
17.2
0.41
7.9
14.0
17.9
0.61
1.0
0.6
6.0
16.1
0.14
3.5
3.1
2.7
9.0
16.8
0.29
6.3
5.9
5.6
5.2
12.0
17.4
0.47
11.5
11.2
10.8
10.5
10.1
16.0
18.3
0.76
3.6
3.3
3.0
2.7
2.3
9.0
16.8
0.29
8.0
3.4
3.1
2.8
2.5
2.1
11.0
7.9
7.5
7.2
6.9
6.6
14.0
9.1
8.8
8.5
8.2
6.0
2.0
1.7
1.3
9.0
4.2
3.8
12.0
6.7
16.0
9.0
12.0
6.1
5.8
5.5
5.2
4.8
15.0
9.6
9.2
8.9
8.6
8.3
20.0
15.5
15.2
14.9
14.5
12.0
4.1
3.6
3.2
2.8
1 in.
1 in.
12.0
17.4
0.47
15.0
18.1
0.69
14.2
20.0
19.2
1.09
2.3
12.0
17.4
0.47
15.0
5.9
5.0
4.6
4.1
3.7
18.0
8.8
8.4
7.9
7.5
7.1
24.0
12.9
12.0
11.5
11.1
10.7
1 in.
1 in.
5/18/15
15.0
18.1
0.69
18.0
18.7
0.92
24.0
20.1
1.43
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
20
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US009 - Performance Data
Single Speed PSC (350 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
1.5
2.2
5.1
2.0
4.2
9.7
3.0
7.5
17.3
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
TC
MBtu/h
SC
MBtu/h
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
6.0
1.5
2.0
4.6
2.0
3.8
8.8
6.1
3.0
7.2
16.6
6.9
1.5
1.9
4.4
0.65
3.8
83.9
2.71
Operation not recommended
Operation not recommended
0.64
3.9
84.1
2.79
11.2
7.5
0.67
0.52
13.0
21.7
0.67
4.6
86.2
3.01
11.4
7.7
0.67
0.49
13.0
23.4
Operation not recommended
Operation not recommended
2.0
3.5
8.1
6.9
0.67
4.6
86.3
3.03
11.1
7.6
0.68
0.55
13.0
20.3
3.0
6.5
15.0
7.5
0.69
5.2
87.9
3.21
11.2
7.7
0.68
0.52
13.0
21.6
1.5
1.7
3.9
7.6
0.69
5.2
88.1
3.23
11.1
7.6
0.69
0.59
13.1
18.6
2.0
3.2
7.4
7.8
0.69
5.4
88.6
3.29
11.1
7.6
0.69
0.58
13.1
19.0
3.0
6.0
13.8
8.2
0.70
5.8
89.6
3.41
11.1
7.6
0.69
0.56
13.0
19.9
1.5
1.6
3.6
8.7
0.72
6.2
90.9
3.52
10.4
7.3
0.70
0.66
12.6
15.9
2.0
3.0
6.9
8.9
0.72
6.4
91.5
3.59
10.5
7.3
0.70
0.64
12.6
16.3
3.0
5.6
12.8
9.3
0.73
6.8
92.7
3.74
10.5
7.4
0.70
0.61
12.6
17.2
1.5
1.4
3.2
9.7
0.75
7.1
93.7
3.79
9.8
7.0
0.71
0.72
12.2
13.6
2.0
2.8
6.5
10.0
0.75
7.4
94.4
3.88
9.8
7.0
0.71
0.70
12.2
14.0
3.0
5.1
11.9
10.5
0.76
7.9
95.8
4.05
10.0
7.2
0.72
0.67
12.3
14.9
1.5
1.4
3.1
11.2
0.77
8.5
97.5
4.27
9.0
6.8
0.75
0.80
11.7
11.3
2.0
2.6
5.9
11.4
0.77
8.8
98.1
4.32
9.1
6.8
0.75
0.76
11.7
12.0
3.0
4.8
11.0
11.8
0.78
9.1
99.1
4.42
9.3
7.0
0.75
0.74
11.8
12.6
1.5
1.3
3.0
12.6
0.78
9.9
101.4
4.74
8.3
6.6
0.79
0.87
11.3
9.5
2.0
2.3
5.3
12.8
0.79
10.1
101.9
4.75
8.4
6.7
0.79
0.83
11.3
10.2
3.0
4.5
10.4
13.0
0.80
10.3
102.4
4.76
8.6
6.8
0.79
0.80
11.3
10.7
1.5
1.3
2.9
2.0
2.1
4.7
7.9
6.5
0.83
0.91
11.0
8.6
3.0
4.3
9.8
8.0
6.6
0.82
0.88
11.0
9.1
7.2
6.2
0.86
0.99
10.6
7.3
7.4
6.3
0.86
0.96
10.6
7.7
1.5
1.0
2.3
2.0
1.8
4.2
3.0
4.0
9.2
1.5
0.9
2.1
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
2.0
1.7
3.9
6.2
5.6
0.89
1.07
9.9
5.8
3.0
3.8
8.8
6.4
5.6
0.89
1.04
9.9
6.1
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
21
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US012 - Performance Data
Single Speed PSC (400 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
1.5
1.2
2.8
2.5
2.6
6.0
3.5
4.1
9.5
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
TC
MBtu/h
SC
MBtu/h
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
7.2
0.81
1.5
1.1
2.5
2.5
2.5
5.8
8.6
3.5
3.9
9.0
8.9
1.5
1.1
2.4
2.5
2.4
5.5
9.6
0.83
3.5
3.8
8.7
10.0
1.5
1.0
2.3
10.3
4.4
84.7
2.61
Operation not recommended
Operation not recommended
0.81
5.9
88.0
3.13
15.7
10.0
0.64
0.47
17.3
33.5
0.83
6.1
88.6
3.14
15.9
10.2
0.64
0.44
17.4
36.1
Operation not recommended
Operation not recommended
6.8
90.2
3.39
15.3
0.85
7.1
91.0
3.45
15.5
0.85
7.4
91.8
3.55
14.7
10.0
0.65
0.53
17.1
28.6
10.1
0.65
0.50
17.1
31.2
10.0
0.68
0.65
16.9
22.6
2.5
2.3
5.3
10.7
0.86
7.7
92.7
3.65
14.9
10.0
0.67
0.60
16.9
24.8
3.5
3.6
8.3
11.0
0.86
8.1
93.5
3.75
15.0
9.9
0.66
0.55
16.9
27.3
1.5
1.0
2.2
11.5
0.87
8.5
94.5
3.86
14.2
9.7
0.68
0.73
16.7
19.5
2.5
2.2
5.1
11.9
0.88
8.9
95.5
3.96
14.4
9.7
0.68
0.68
16.7
21.1
3.5
3.4
7.9
12.4
0.89
9.3
96.6
4.07
14.5
9.8
0.67
0.63
16.6
23.0
1.5
0.9
2.1
12.6
0.89
9.6
97.2
4.15
13.7
9.4
0.69
0.81
16.5
16.9
2.5
2.1
4.9
13.2
0.91
10.1
98.4
4.26
13.9
9.5
0.69
0.76
16.4
18.2
3.5
3.2
7.4
13.7
0.92
10.6
99.7
4.36
14.0
9.6
0.69
0.71
16.4
19.7
14.6
1.5
0.9
2.0
14.2
0.91
11.0
100.8
4.54
13.0
9.2
0.70
0.89
16.1
2.5
2.0
4.5
14.6
0.93
11.4
101.7
4.60
13.2
9.3
0.70
0.85
16.1
15.5
3.5
2.9
6.7
15.0
0.94
11.7
102.6
4.66
13.4
9.4
0.70
0.83
16.2
16.2
1.5
0.8
1.8
15.7
0.94
12.5
104.4
4.92
12.4
8.9
0.72
1.02
15.8
12.1
2.5
1.8
4.2
16.0
0.95
12.7
104.9
4.93
12.5
9.0
0.72
0.97
15.9
12.9
3.5
2.7
6.2
16.2
0.96
12.9
105.5
4.95
12.8
9.2
0.71
0.94
16.0
13.6
1.5
0.8
1.7
Operation not recommended
2.5
1.7
3.8
12.2
9.0
0.73
1.11
16.0
11.0
3.5
2.5
5.8
12.4
9.0
0.73
1.07
16.1
11.6
1.5
0.7
1.6
2.5
1.5
3.5
11.8
8.8
0.75
1.23
16.0
9.5
3.5
2.3
5.3
12.0
8.9
0.74
1.20
16.1
10.0
1.5
0.7
1.5
2.5
1.4
3.1
11.3
8.6
0.76
1.34
15.8
3.5
2.1
4.9
11.5
8.7
0.76
1.30
15.9
Operation not recommended
Operation not recommended
Operation not recommended
8.4
8.8
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
22
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US015 - Performance Data
Single Speed PSC (500 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
2.0
0.6
1.4
3.0
1.2
2.8
4.0
2.0
4.6
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
10.0
1.00
6.6
86.5
2.93
1.2
2.0
0.6
1.4
3.0
1.1
2.6
11.0
1.04
Operation not recommended
7.4
88.3
3.09
1.3
14.5
9.8
Operation not recommended
0.68
0.71
16.9
20.3
---
4.0
1.9
4.4
11.0
1.00
7.6
88.4
3.22
1.3
14.7
10.0
0.68
0.67
17.0
21.9
---
2.0
0.6
1.3
3.0
1.1
2.5
12.1
1.05
1.3
15.6
10.6
0.68
20.2
---
4.0
1.8
4.3
12.4
2.0
0.5
1.2
13.0
3.0
1.0
2.3
13.4
1.07
4.0
1.8
4.1
13.7
1.07
2.0
0.5
1.2
14.4
1.07
10.7
94.6
3.93
3.0
0.9
2.1
14.8
1.08
11.1
95.4
4.03
4.0
1.7
3.9
15.3
1.09
11.5
96.2
4.12
1.7
2.0
0.5
1.1
15.7
1.08
12.0
97.1
4.26
1.8
3.0
0.8
1.9
16.3
1.09
12.5
98.1
4.37
1.8
15.2
10.6
4.0
1.6
3.7
16.8
1.10
13.1
99.1
4.48
1.8
15.4
10.6
Operation not recommended
Operation not recommended
8.5
90.4
3.37
0.77
18.3
1.04
8.8
90.9
3.50
1.3
15.9
10.8
0.68
0.74
18.4
21.4
---
1.06
9.4
92.1
3.59
1.4
16.5
11.3
0.68
0.85
19.4
19.4
0.8
9.7
92.7
3.67
1.4
16.8
11.4
0.68
0.83
19.6
20.2
0.8
10.1
93.4
3.75
1.5
17.0
11.5
0.68
0.81
19.8
21.0
0.8
1.6
15.7
10.9
0.69
0.92
18.8
17.2
0.9
1.6
16.0
11.0
0.69
0.89
19.0
18.0
0.9
16.2
11.1
0.68
0.86
19.1
18.9
0.8
14.9
10.5
0.70
0.98
18.2
15.2
1.1
0.70
0.94
18.4
16.1
1.1
0.69
0.90
18.5
17.1
1.0
1.4
2.0
0.5
1.1
17.6
1.10
13.8
100.5
4.69
2.0
14.2
10.2
0.72
1.03
17.7
13.7
3.0
0.8
1.8
18.0
1.11
14.2
101.3
4.75
2.0
14.4
10.3
0.71
0.99
17.8
14.6
1.3
4.0
1.5
3.6
18.4
1.12
14.6
102.1
4.81
2.1
14.7
10.4
0.71
0.96
17.9
15.3
1.3
2.0
0.4
1.0
19.4
1.11
15.6
103.9
5.12
2.3
13.4
9.9
0.74
1.09
17.1
12.3
1.8
3.0
0.7
1.6
19.7
1.13
15.9
104.5
5.13
2.3
13.6
10.0
0.73
1.04
17.2
13.1
1.7
20.0
1.14
16.1
105.0
5.14
2.3
13.9
10.1
0.73
1.01
17.3
13.8
1.6
4.0
1.5
3.4
2.0
0.4
0.9
Operation not recommended
3.0
0.6
1.4
12.8
9.7
0.76
1.16
16.7
11.0
2.1
4.0
1.4
3.2
13.0
9.8
0.76
1.13
16.8
11.5
1.9
2.0
0.4
0.9
3.0
0.5
1.2
11.8
9.4
12.0
9.5
Operation not recommended
Operation not recommended
0.80
1.27
16.1
9.2
2.7
0.79
1.24
16.2
9.7
2.5
4.0
1.3
3.0
2.0
0.4
0.9
3.0
0.5
1.1
10.8
9.1
0.84
1.41
15.6
7.6
3.3
4.0
1.2
2.9
11.0
9.2
0.84
1.37
15.7
8.0
3.0
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
23
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US018 - Performance Data
Single Speed PSC (600 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.0
2.0
4.6
5.0
3.4
7.8
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
13.0
1.21
8.9
88.1
3.15
1.4
3.0
1.1
2.6
4.0
1.9
4.4
14.5
1.29
Operation not recommended
10.1
90.3
3.29
1.5
18.2
11.8
14.9
1.31
10.4
91.0
3.33
1.5
18.4
12.0
5.0
3.3
7.6
3.0
1.1
2.5
4.0
1.8
4.3
5.0
3.2
7.5
16.5
3.0
1.0
2.3
16.0
Operation not recommended
Operation not recommended
15.7
1.34
11.1
92.2
1.37
11.8
1.36
11.4
0.65
0.86
21.1
21.0
---
0.65
0.81
21.2
22.7
---
22.2
20.8
---
Operation not recommended
3.43
1.6
19.1
12.4
0.65
0.92
93.4
3.52
1.6
19.4
12.6
0.65
0.89
22.4
21.9
---
92.7
3.45
1.7
19.7
12.8
0.65
0.98
23.0
20.1
0.9
4.0
1.8
4.1
17.0
1.40
12.2
94.2
3.57
1.7
20.0
13.0
0.65
0.97
23.3
20.6
0.9
5.0
3.2
7.3
18.0
1.43
13.1
95.8
3.69
1.8
20.3
13.1
0.65
0.96
23.6
21.1
0.9
3.0
0.9
2.1
17.5
1.43
12.6
95.0
3.60
1.9
18.7
12.4
0.66
1.07
22.3
17.6
1.1
4.0
1.7
3.9
18.5
1.45
13.5
96.5
3.73
1.9
18.9
12.6
0.67
1.06
22.5
17.9
1.1
5.0
3.1
7.1
19.5
1.48
14.5
98.1
3.86
2.0
19.2
12.8
0.67
1.05
22.7
18.3
1.0
3.0
0.8
1.9
19.0
1.49
13.9
97.3
3.74
2.1
17.7
12.0
0.68
1.15
21.6
15.4
1.3
4.0
1.6
3.7
20.0
1.51
14.8
98.9
3.88
2.1
17.9
12.3
0.69
1.14
21.7
15.7
1.3
5.0
3.0
6.9
21.0
1.53
15.8
100.4
4.02
2.2
18.0
12.5
0.69
1.13
21.9
15.9
1.2
3.0
0.8
1.8
21.9
1.56
16.5
101.7
4.10
2.4
16.6
11.4
0.69
1.36
21.2
12.2
1.7
4.0
1.5
3.6
22.6
1.58
17.2
102.8
4.17
2.4
16.8
11.7
0.70
1.30
21.2
12.9
1.6
5.0
2.9
6.8
23.3
1.61
17.8
103.9
4.25
2.5
17.0
12.0
0.70
1.26
21.3
13.5
1.5
3.0
0.7
1.6
24.7
1.64
19.1
106.2
4.43
2.8
15.4
10.8
0.70
1.49
20.5
10.3
2.2
4.0
1.5
3.4
25.1
1.66
19.5
106.8
4.44
2.8
15.7
11.1
0.71
1.43
20.5
11.0
2.0
5.0
2.9
6.6
25.5
1.68
19.8
107.4
4.45
2.8
16.0
11.4
0.71
1.38
20.7
11.6
1.9
3.0
0.6
1.4
Operation not recommended
4.0
1.4
3.2
14.9
11.0
0.74
1.52
20.1
9.8
2.5
5.0
2.8
6.4
15.1
11.1
0.73
1.47
20.1
10.3
2.3
3.0
0.5
1.2
4.0
1.3
3.0
13.9
10.5
5.0
2.7
6.2
14.2
10.7
3.0
0.5
1.1
4.0
1.2
2.9
13.2
10.1
0.76
1.76
5.0
2.6
6.1
13.5
10.2
0.76
1.71
Operation not recommended
Operation not recommended
0.76
1.60
19.4
8.7
3.2
0.75
1.56
19.5
9.1
3.0
19.2
7.5
4.0
19.3
7.9
Operation not recommended
3.6
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
24
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US023 - Performance Data
Single Speed PSC (700 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
5.5
17.9
6.0
4.5
10.5
18.2
3.0
1.1
2.5
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
TC
MBtu/h
SC
MBtu/h
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
15.0
1.68
9.2
85.3
2.61
Operation not recommended
Operation not recommended
1.74
11.9
88.7
3.01
26.3
16.7
0.63
1.11
30.1
23.8
1.76
12.2
89.1
3.04
26.7
17.0
0.64
1.04
30.2
25.7
Operation not recommended
Operation not recommended
4.5
2.3
5.3
19.6
1.78
13.6
90.7
3.24
26.5
17.0
0.64
1.20
30.6
22.0
6.0
4.5
10.3
20.3
1.80
14.1
91.4
3.30
26.8
17.3
0.64
1.14
30.7
23.6
3.0
1.0
2.3
20.8
1.79
14.7
92.1
3.41
26.4
17.3
0.66
1.37
31.1
19.3
4.5
2.2
5.2
21.6
1.82
15.4
92.9
3.48
26.6
17.4
0.65
1.30
31.1
20.5
6.0
4.4
10.2
22.3
1.84
16.0
93.8
3.55
26.9
17.5
0.65
1.23
31.1
21.9
3.0
1.0
2.2
23.0
1.83
16.7
94.6
3.68
25.7
17.0
0.66
1.52
30.9
16.9
4.5
2.2
5.0
23.8
1.85
17.5
95.5
3.76
25.9
17.1
0.66
1.44
30.9
18.0
6.0
4.3
10.0
24.6
1.88
18.2
96.4
3.84
26.2
17.2
0.66
1.36
30.8
19.3
3.0
0.9
2.0
25.2
1.87
18.8
97.1
3.94
25.0
16.7
0.67
1.67
30.7
15.0
4.5
2.1
4.9
26.0
1.89
19.6
98.1
4.03
25.3
16.8
0.67
1.58
30.6
16.0
6.0
4.3
9.9
26.9
1.91
20.4
99.1
4.12
25.5
16.9
0.66
1.49
30.6
17.1
3.0
0.8
1.9
27.9
1.88
21.5
100.2
4.35
23.8
16.1
0.68
1.81
30.0
13.1
4.5
2.1
4.7
28.5
1.90
22.0
101.0
4.40
24.1
16.3
0.68
1.73
30.0
13.9
6.0
4.2
9.7
29.2
1.92
22.6
101.8
4.46
24.5
16.5
0.67
1.68
30.2
14.6
3.0
0.8
1.7
30.6
1.88
24.1
103.4
4.76
22.7
15.6
0.69
2.01
29.6
11.3
4.5
2.0
4.6
31.0
1.91
24.5
103.9
4.77
23.0
15.8
0.69
1.92
29.6
12.0
6.0
4.1
9.6
31.5
1.93
24.9
104.5
4.78
23.5
16.0
0.68
1.86
29.8
12.6
3.0
0.7
1.6
4.5
1.9
4.4
21.7
15.1
0.69
2.20
29.2
9.9
6.0
4.1
9.4
22.1
15.2
0.69
2.13
29.3
10.4
3.0
0.6
1.4
4.5
1.9
4.3
20.2
14.2
0.70
2.46
28.6
8.2
6.0
4.0
9.3
20.6
14.4
0.70
2.39
28.8
8.6
3.0
0.6
1.3
4.5
1.8
4.1
18.4
14.2
0.77
2.85
28.2
6.5
6.0
3.9
9.1
18.8
14.4
0.77
2.77
28.3
6.8
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
25
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US024 - Performance Data
Single Speed PSC (800 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
6.0
3.0
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
15.6
1.68
9.8
86.0
2.72
1.6
5.5
18.7
1.74
12.7
89.6
3.14
1.7
27.5
17.4
4.5
10.5
19.0
1.76
13.0
90.0
3.16
1.7
27.8
17.7
1.1
2.5
4.5
2.3
5.3
6.0
4.5
3.0
1.0
Operation not recommended
Operation not recommended
Operation not recommended
0.63
1.11
31.2
24.8
---
0.64
1.04
31.4
26.8
---
31.7
22.9
---
Operation not recommended
20.5
1.78
14.4
91.7
3.38
1.9
27.6
17.7
0.64
10.3
21.1
1.80
15.0
92.4
3.44
1.9
2.3
21.7
1.79
15.6
93.2
3.56
2.1
1.20
27.9
18.0
0.64
1.14
31.8
24.6
---
27.5
18.0
0.65
1.37
32.2
20.1
1.3
4.5
2.2
5.2
22.5
1.82
16.3
94.0
3.63
2.1
27.8
18.1
0.65
1.30
32.2
21.4
1.2
6.0
4.4
10.2
23.2
1.84
16.9
94.9
3.70
2.2
28.0
18.2
0.65
1.23
32.2
22.7
1.2
3.0
1.0
2.2
24.0
1.83
17.7
95.7
3.84
2.3
26.8
17.7
0.66
1.52
32.0
17.6
1.5
4.5
2.2
5.0
24.8
1.85
18.5
96.7
3.92
2.4
27.0
17.8
0.66
1.44
32.0
18.8
1.4
6.0
4.3
10.0
25.6
1.88
19.2
97.6
4.00
2.4
27.3
17.9
0.66
1.36
31.9
20.1
1.4
3.0
0.9
2.0
26.2
1.87
19.8
98.3
4.10
2.6
26.1
17.4
0.67
1.67
31.8
15.6
1.8
4.5
2.1
4.9
27.1
1.89
20.6
99.4
4.20
2.6
26.3
17.5
0.66
1.58
31.7
16.7
1.8
6.0
4.3
9.9
28.0
1.91
21.5
100.4
4.30
2.7
26.6
17.6
0.66
1.49
31.6
17.8
1.7
3.0
0.8
1.9
29.0
1.88
22.6
101.5
4.53
2.9
24.9
16.8
0.68
1.81
31.1
13.7
2.3
4.5
2.1
4.7
29.7
1.90
23.2
102.4
4.58
2.9
25.2
17.0
0.68
1.73
31.1
14.5
2.2
6.0
4.2
9.7
30.4
1.92
23.8
103.2
4.64
3.0
25.5
17.1
0.67
1.68
31.2
15.2
2.1
3.0
0.8
1.7
31.8
1.88
25.4
104.8
4.95
3.3
23.6
16.2
0.69
2.01
30.5
11.7
2.8
4.5
2.0
4.6
32.3
1.91
25.8
105.4
4.96
3.4
24.0
16.5
0.69
1.92
30.6
12.5
2.7
6.0
4.1
9.6
32.8
1.93
26.2
105.9
4.98
3.5
24.5
16.7
0.68
1.86
30.8
13.2
2.5
3.0
0.7
1.6
Operation not recommended
4.5
1.9
4.4
22.7
16.0
0.71
2.20
30.2
10.3
3.4
6.0
4.1
9.4
23.0
16.2
0.70
2.13
30.3
10.8
3.2
3.0
0.6
1.4
4.5
1.9
4.3
21.1
15.4
6.0
4.0
9.3
21.5
15.6
3.0
0.6
1.3
4.5
1.8
4.1
19.1
14.8
0.77
2.85
28.9
6.7
4.9
6.0
3.9
9.1
19.6
15.0
0.77
2.77
29.0
7.1
4.6
Operation not recommended
Operation not recommended
0.73
2.46
29.5
8.6
4.1
0.73
2.39
29.7
9.0
3.9
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
26
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US030 - Performance Data
Single Speed PSC (1000 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
PSI
FT
4.0
1.0
2.2
6.0
1.9
4.5
8.0
3.8
8.7
4.0
0.9
2.1
6.0
1.9
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
20.0
1.90
4.4
21.2
1.96
14.5
87.6
3.16
2.1
30.4
19.3
22.0
1.98
15.2
88.4
3.26
2.1
30.8
19.7
8.0
3.7
8.5
4.0
0.9
2.0
13.5
86.5
3.09
1.9
Operation not recommended
Operation not recommended
Operation not recommended
0.64
1.38
35.1
21.9
---
0.64
1.30
35.2
23.7
---
Operation not recommended
6.0
1.8
4.3
23.9
2.00
17.1
90.1
3.50
2.3
31.3
20.2
0.64
1.41
36.1
22.1
---
8.0
3.7
8.4
25.0
2.02
18.1
91.1
3.62
2.4
32.4
20.9
0.65
1.40
37.2
23.1
---
4.0
0.8
1.9
25.8
2.01
18.9
91.9
3.76
2.5
30.5
19.9
0.65
1.39
35.2
21.9
1.4
6.0
1.8
4.1
26.9
2.04
19.9
92.9
3.87
2.6
32.3
21.0
0.65
1.45
37.2
22.3
1.3
8.0
3.6
8.3
27.9
2.06
20.9
93.8
3.97
2.7
34.0
22.1
0.65
1.50
39.1
22.7
1.3
4.0
0.8
1.8
29.4
2.05
22.4
95.2
4.20
2.9
30.1
19.7
0.66
1.54
35.3
19.5
1.6
6.0
1.7
4.0
30.5
2.07
23.4
96.2
4.31
2.9
31.9
20.9
0.66
1.60
37.4
20.0
1.5
8.0
3.6
8.2
31.6
2.10
24.5
97.3
4.42
3.0
33.8
22.1
0.66
1.65
39.4
20.5
1.4
4.0
0.7
1.6
33.0
2.09
25.9
98.6
4.63
3.2
29.6
19.5
0.66
1.69
35.4
17.5
2.0
6.0
1.7
3.9
34.2
2.11
27.0
99.6
4.74
3.3
31.6
20.8
0.66
1.75
37.6
18.1
1.9
8.0
3.5
8.1
35.3
2.13
28.0
100.7
4.86
3.4
33.6
22.2
0.66
1.80
39.7
18.7
1.8
4.0
0.7
1.5
36.9
2.19
29.4
102.1
4.93
3.6
29.3
19.3
0.66
2.16
36.6
13.6
2.5
6.0
1.6
3.8
37.8
2.22
30.2
103.0
4.99
3.7
30.7
20.4
0.66
2.06
37.8
15.0
2.4
8.0
3.5
8.0
38.7
2.24
31.0
103.8
5.06
3.8
32.1
21.5
0.67
1.99
38.8
16.1
2.3
4.0
0.6
1.4
40.7
2.29
32.9
105.7
5.21
4.1
29.0
19.0
0.66
2.36
37.0
12.3
3.3
6.0
1.6
3.7
41.4
2.32
33.4
106.3
5.22
4.2
29.9
20.0
0.67
2.25
37.6
13.3
3.1
8.0
3.4
7.9
42.0
2.35
34.0
106.9
5.24
4.3
30.5
20.7
0.68
2.18
37.9
14.0
3.0
4.0
0.6
1.3
6.0
1.6
3.6
27.5
19.7
0.72
2.58
36.3
10.7
3.9
8.0
3.4
7.8
28.0
19.9
0.71
2.50
36.5
11.2
3.7
4.0
0.5
1.2
6.0
1.5
3.5
24.9
18.7
8.0
3.3
7.6
25.4
19.0
4.0
0.5
1.1
6.0
1.5
3.3
21.1
17.2
0.82
3.09
31.7
6.8
5.7
8.0
3.3
7.5
21.6
17.5
0.81
3.00
31.8
7.2
5.4
Operation not recommended
Operation not recommended
Operation not recommended
0.75
2.89
34.7
8.6
4.9
0.75
2.81
35.0
9.0
4.5
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
27
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US036 - Performance Data
Single Speed PSC (1250 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.5
3.4
7.0
2.6
6.0
9.0
6.1
14.1
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
23.4
2.43
15.1
86.9
2.83
2.3
5.0
1.4
3.1
7.0
2.5
5.8
27.4
2.46
Operation not recommended
19.0
90.1
3.27
2.5
35.9
25.1
Operation not recommended
9.0
6.0
13.8
28.2
2.51
19.6
90.7
3.29
2.6
36.4
25.6
5.0
1.3
2.9
7.0
2.4
5.5
30.8
2.52
22.2
92.8
3.58
2.9
38.7
27.2
0.70
1.74
9.0
5.9
13.6
31.9
2.57
23.2
93.7
3.65
2.9
39.2
27.5
0.70
1.66
5.0
1.1
2.6
33.3
2.53
24.6
94.8
3.85
3.1
40.9
29.1
0.71
1.90
7.0
2.3
5.2
34.5
2.58
25.7
95.8
3.92
3.2
41.5
29.2
0.70
1.84
9.0
5.8
13.3
35.7
2.62
26.8
96.7
3.99
3.3
42.0
29.4
0.70
5.0
1.0
2.4
37.7
2.60
28.8
98.3
4.25
3.5
39.2
28.5
0.73
7.0
2.2
5.0
39.0
2.64
30.0
99.4
4.33
3.6
39.9
28.7
0.72
2.02
9.0
5.7
13.1
40.2
2.67
31.1
100.4
4.42
3.6
40.5
28.9
0.71
5.0
0.9
2.1
42.1
2.67
33.0
101.9
4.62
3.9
37.6
27.9
0.74
Operation not recommended
0.70
1.64
41.5
21.9
---
0.70
1.54
41.7
23.6
---
44.6
22.2
---
44.9
23.6
---
47.4
21.5
1.6
47.7
22.5
1.5
1.78
48.1
23.6
1.5
2.09
46.4
18.8
2.0
46.8
19.7
1.9
1.96
47.2
20.7
1.8
2.28
45.3
16.5
2.5
Operation not recommended
7.0
2.1
4.7
43.5
2.70
34.3
103.0
4.73
4.0
38.3
28.2
0.74
2.21
45.8
17.4
2.4
9.0
5.5
12.8
44.8
2.72
35.5
104.1
4.83
4.1
39.0
28.5
0.73
2.13
46.3
18.3
2.3
5.0
0.8
1.8
46.7
2.73
37.4
105.6
5.01
4.4
36.1
27.1
0.75
2.55
44.8
14.1
3.2
7.0
1.9
4.5
47.7
2.76
38.3
106.4
5.07
4.5
36.7
27.6
0.75
2.43
45.0
15.1
3.0
9.0
5.4
12.5
48.8
2.79
39.3
107.3
5.13
4.6
37.4
28.0
0.75
2.36
45.4
15.9
2.9
5.0
0.7
1.6
51.2
2.79
41.7
109.3
5.39
4.9
34.5
26.3
0.76
2.79
44.1
12.4
3.9
7.0
1.8
4.2
52.0
2.83
42.4
109.9
5.40
5.1
35.1
27.0
0.77
2.67
44.2
13.2
3.7
9.0
5.3
12.3
52.8
2.86
43.1
110.5
5.41
5.2
35.8
27.5
0.77
2.58
44.6
13.9
3.6
5.0
0.6
1.3
7.0
1.7
4.0
33.3
26.4
0.79
2.98
43.5
11.2
4.6
9.0
5.2
12.0
33.8
26.6
0.79
2.89
43.6
11.7
4.4
5.0
0.5
1.1
7.0
1.6
3.7
31.2
25.3
9.0
5.1
11.8
31.8
25.7
5.0
0.4
0.8
Operation not recommended
Operation not recommended
Operation not recommended
0.81
3.28
42.4
9.5
5.7
0.81
3.19
42.7
10.0
5.4
Operation not recommended
7.0
1.5
3.5
26.5
22.7
0.85
3.61
38.8
7.4
6.8
9.0
5.0
11.5
27.1
23.0
0.85
3.50
39.0
7.7
6.4
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
28
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US041 - Performance Data
Single Speed PSC (1300 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
25.7
2.81
16.1
85.0
2.68
3.5
5.0
1.5
3.4
8.0
3.4
7.8
28.5
2.82
Operation not recommended
18.9
86.9
2.97
3.7
41.9
30.4
Operation not recommended
11.0
7.9
18.1
29.5
2.86
19.7
87.5
3.02
3.8
42.4
31.0
5.0
1.3
3.0
Operation not recommended
0.73
1.93
48.4
21.7
---
0.73
1.81
48.6
23.4
---
Operation not recommended
8.0
3.2
7.5
31.7
2.88
21.9
89.0
3.23
4.0
43.8
31.4
0.72
2.06
50.9
21.2
---
11.0
7.7
17.8
33.0
2.91
23.1
89.8
3.33
4.1
44.4
31.9
0.72
1.95
51.1
22.8
---
5.0
1.2
2.7
33.7
2.92
23.7
90.3
3.38
4.4
45.2
32.0
0.71
2.31
53.1
19.6
2.4
8.0
3.1
7.1
35.2
2.94
25.1
91.2
3.50
4.5
45.8
32.4
0.71
2.20
53.3
20.8
2.4
11.0
7.5
17.4
36.6
2.96
26.5
92.2
3.62
4.7
46.5
32.7
0.70
2.09
53.6
22.2
2.3
5.0
1.0
2.3
37.8
2.99
27.7
93.0
3.72
5.0
44.2
31.5
0.71
2.57
52.9
17.2
3.0
8.0
2.9
6.7
39.3
3.01
29.0
94.0
3.83
5.1
45.1
31.8
0.70
2.43
53.4
18.6
2.8
11.0
7.4
17.0
40.7
3.03
30.4
94.9
3.95
5.3
46.1
32.1
0.70
2.30
53.9
20.1
2.7
5.0
0.9
2.0
42.0
3.05
31.6
95.8
4.03
5.6
43.1
30.9
0.72
2.82
52.7
15.3
3.8
8.0
2.8
6.4
43.4
3.07
32.9
96.7
4.14
5.7
44.4
31.2
0.70
2.66
53.5
16.7
3.6
11.0
7.2
16.7
44.8
3.09
34.3
97.7
4.25
5.9
45.7
31.5
0.69
2.50
54.2
18.3
3.4
5.0
0.7
1.6
46.9
3.11
36.3
99.0
4.42
6.3
41.7
30.4
0.73
3.02
52.0
13.8
4.8
8.0
2.6
6.0
48.0
3.15
37.3
99.8
4.48
6.5
42.6
30.6
0.72
2.88
52.5
14.8
4.5
11.0
7.1
16.3
49.2
3.18
38.3
100.5
4.54
6.7
43.7
30.8
0.71
2.79
53.2
15.7
4.3
5.0
0.5
1.2
51.9
3.18
41.0
102.3
4.78
7.1
40.2
29.8
0.74
3.34
51.6
12.1
6.0
8.0
2.5
5.7
52.7
3.22
41.7
102.8
4.79
7.3
40.9
30.0
0.73
3.18
51.7
12.8
5.7
11.0
6.9
16.0
53.5
3.26
42.4
103.4
4.81
7.5
41.7
30.1
0.72
3.08
52.2
13.5
5.5
5.0
0.4
0.9
8.0
2.3
5.3
38.2
29.0
Operation not recommended
0.76
3.55
50.3
10.8
7.1
11.0
6.8
15.6
38.8
29.2
0.75
3.44
50.5
11.3
6.8
5.0
0.4
0.9
8.0
2.1
4.9
35.2
27.9
11.0
6.6
15.2
35.9
28.3
5.0
0.4
0.9
8.0
2.0
4.6
31.8
27.1
0.85
4.55
47.4
7.0
10.4
11.0
6.5
14.9
32.5
27.5
0.84
4.42
47.6
7.4
10.0
Operation not recommended
Operation not recommended
0.79
3.91
48.5
9.0
8.6
0.79
3.80
48.9
9.4
8.3
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
29
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US042 - Performance Data
Single Speed PSC (1400 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
27.0
2.81
17.4
85.9
2.82
3.5
5.0
1.5
3.4
8.0
3.4
7.8
30.0
2.82
Operation not recommended
20.4
87.8
3.12
3.7
43.6
31.7
Operation not recommended
11.0
7.9
18.1
31.0
2.86
21.2
88.5
3.18
3.8
44.2
32.3
5.0
1.3
3.0
8.0
3.2
7.5
33.4
11.0
7.7
17.8
5.0
1.2
2.7
Operation not recommended
2.88
23.5
90.1
3.40
34.8
2.91
24.8
91.0
35.5
2.92
25.5
91.5
0.73
1.93
50.2
22.6
---
0.73
1.81
50.4
24.4
---
22.1
---
Operation not recommended
4.0
45.7
32.7
0.72
2.06
3.50
4.1
3.56
4.4
52.7
46.3
33.2
0.72
1.95
53.0
23.7
---
47.1
33.4
0.71
2.31
55.0
20.4
2.4
8.0
3.1
7.1
37.0
2.94
27.0
92.5
3.69
4.5
47.8
33.8
0.71
2.20
55.3
21.7
2.4
11.0
7.5
17.4
38.5
2.96
28.4
93.5
3.81
4.7
48.4
34.1
0.70
2.09
55.5
23.2
2.3
5.0
1.0
2.3
39.9
2.99
29.7
94.4
3.91
5.0
46.0
32.8
0.71
2.57
54.8
17.9
3.0
8.0
2.9
6.7
41.4
3.01
31.1
95.3
4.03
5.1
47.0
33.1
0.70
2.43
55.3
19.3
2.8
11.0
7.4
17.0
42.9
3.03
32.5
96.3
4.15
5.3
48.0
33.5
0.70
2.30
55.8
20.9
2.7
5.0
0.9
2.0
44.2
3.05
33.8
97.2
4.25
5.6
44.9
32.2
0.72
2.82
54.5
15.9
3.8
8.0
2.8
6.4
45.7
3.07
35.2
98.2
4.36
5.7
46.3
32.5
0.70
2.66
55.3
17.4
3.6
11.0
7.2
16.7
47.2
3.09
36.7
99.2
4.48
5.9
47.6
32.8
0.69
2.50
56.1
19.0
3.4
4.8
5.0
0.7
1.6
49.4
3.11
38.8
100.7
4.65
6.3
43.4
31.6
0.73
3.02
53.8
14.4
8.0
2.6
6.0
50.6
3.15
39.8
101.5
4.71
6.5
44.4
31.9
0.72
2.88
54.3
15.4
4.5
11.0
7.1
16.3
51.8
3.18
40.9
102.2
4.78
6.7
45.6
32.1
0.70
2.79
55.1
16.3
4.3
5.0
0.5
1.2
54.6
3.18
43.8
104.1
5.04
7.1
42.0
31.0
0.74
3.34
53.4
12.6
6.0
8.0
2.5
5.7
55.5
3.22
44.5
104.7
5.05
7.3
42.6
31.2
0.73
3.18
53.5
13.4
5.7
11.0
6.9
16.0
56.3
3.26
45.2
105.2
5.06
7.5
43.5
31.4
0.72
3.08
54.0
14.1
5.5
5.0
0.4
0.9
Operation not recommended
8.0
2.3
5.3
39.8
30.2
0.76
3.55
52.0
11.2
7.1
11.0
6.8
15.6
40.5
30.5
0.75
3.44
52.2
11.8
6.8
5.0
0.4
0.9
8.0
2.1
4.9
36.7
29.1
11.0
6.6
15.2
37.4
29.5
5.0
0.4
0.9
8.0
2.0
4.6
33.2
28.2
0.85
4.55
48.7
7.3
10.4
11.0
6.5
14.9
33.9
28.6
0.84
4.42
49.0
7.7
10.0
Operation not recommended
Operation not recommended
0.79
3.91
50.0
9.4
8.6
0.79
3.80
50.4
9.8
8.3
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
30
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US048 - Performance Data
Single Speed PSC (1600 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
6.0
2.2
5.1
9.0
4.4
10.0
12.0
6.8
15.8
6.0
2.0
4.7
9.0
4.2
12.0
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
30.8
3.32
19.5
87.0
2.72
4.6
9.6
35.3
3.31
24.0
89.8
3.12
4.9
50.3
31.3
0.62
2.33
58.3
21.6
---
6.7
15.5
35.8
3.35
24.4
90.1
3.13
5.0
51.0
31.9
0.63
2.19
58.5
23.3
---
6.0
1.9
4.3
9.0
4.0
9.2
40.1
3.44
28.4
5.4
53.1
34.8
0.65
61.7
21.1
---
12.0
6.5
15.0
41.9
3.51
30.0
93.9
3.51
5.5
54.0
35.5
0.66
2.39
62.2
22.6
---
6.0
1.7
3.9
42.9
3.50
31.0
94.5
3.60
5.9
54.9
37.4
0.68
2.84
64.6
19.3
2.9
Operation not recommended
Operation not recommended
Operation not recommended
92.8
3.41
Operation not recommended
2.52
9.0
3.8
8.8
45.5
3.58
33.3
96.1
3.73
6.1
56.0
38.3
0.68
2.72
65.2
20.6
2.8
12.0
6.3
14.6
48.1
3.66
35.6
97.7
3.85
6.2
57.0
39.1
0.69
2.59
65.8
22.0
2.7
6.0
1.5
3.5
49.5
3.67
37.0
98.6
3.96
6.7
54.5
37.4
0.69
3.14
65.2
17.4
3.5
9.0
3.6
8.4
52.2
3.73
39.5
100.2
4.11
6.8
55.4
38.0
0.69
2.99
65.6
18.5
3.4
12.0
6.1
14.1
54.9
3.79
42.0
101.9
4.25
7.0
56.2
38.6
0.69
2.85
65.9
19.8
3.2
6.0
1.3
3.0
56.1
3.83
43.0
102.6
4.29
7.5
54.1
37.3
0.69
3.43
65.8
15.8
4.5
9.0
3.5
8.0
58.9
3.87
45.7
104.4
4.46
7.7
54.8
37.7
0.69
3.27
65.9
16.8
4.3
12.0
5.9
13.7
61.7
3.91
48.4
106.1
4.63
7.9
55.4
38.2
0.69
3.10
66.0
17.9
4.0
6.0
1.1
2.6
61.3
3.91
47.9
105.8
4.59
8.4
51.4
35.8
0.70
3.71
64.0
13.9
5.6
9.0
3.3
7.6
63.2
3.96
49.7
107.0
4.68
8.6
52.1
36.4
0.70
3.54
64.2
14.7
5.3
12.0
5.8
13.3
65.2
4.01
51.5
108.2
4.77
8.9
52.9
36.9
0.70
3.43
64.6
15.5
5.1
6.0
1.0
2.2
66.5
4.00
52.9
109.1
4.88
9.4
48.7
34.3
0.70
4.06
62.5
12.0
7.0
9.0
3.1
7.1
67.5
4.05
53.7
109.7
4.89
9.7
49.4
35.0
0.71
3.87
62.7
12.8
6.7
12.0
5.6
12.9
68.6
4.10
54.6
110.3
4.90
10.1
50.4
35.6
0.70
3.75
63.2
13.5
6.4
6.0
0.8
1.8
Operation not recommended
9.0
2.9
6.7
46.7
34.3
0.74
4.37
61.6
10.7
8.4
12.0
5.4
12.5
47.4
34.6
0.73
4.23
61.8
11.2
8.0
6.0
0.6
1.4
9.0
2.7
6.3
43.4
33.2
12.0
5.2
12.1
44.3
33.7
6.0
0.4
1.0
Operation not recommended
Operation not recommended
0.76
4.83
59.9
9.0
10.3
0.76
4.70
60.4
9.4
9.7
12.4
Operation not recommended
9.0
2.6
5.9
40.1
32.0
0.80
5.40
58.5
7.4
12.0
5.0
11.6
41.0
32.5
0.79
5.24
58.8
7.8
11.8
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
31
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US060 - Performance Data
Single Speed PSC (2000 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
9.0
3.8
8.7
12.0
6.3
14.5
15.0
9.7
22.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
41.9
4.06
28.0
87.4
3.02
5.5
9.0
3.6
8.4
12.0
6.1
14.1
43.8
3.99
Operation not recommended
30.2
88.3
3.22
5.9
72.0
49.1
Operation not recommended
15.0
9.6
22.2
46.5
4.11
32.5
89.5
3.31
6.1
73.0
50.0
9.0
3.5
8.0
12.0
6.0
13.7
49.7
4.12
35.6
91.0
3.53
6.6
70.8
48.8
0.69
3.11
81.4
22.8
---
15.0
9.4
21.7
52.2
4.22
37.8
92.2
3.63
6.7
71.8
49.5
0.69
2.97
81.9
24.2
---
Operation not recommended
0.68
2.96
82.1
24.3
---
0.68
2.78
82.5
26.3
---
Operation not recommended
9.0
3.3
7.6
54.6
4.20
40.3
93.3
3.81
7.1
68.5
48.0
0.70
3.34
79.9
20.5
3.9
12.0
5.8
13.4
56.2
4.26
41.7
94.0
3.87
7.3
69.5
48.5
0.70
3.25
80.6
21.4
3.7
15.0
9.2
21.3
57.8
4.32
43.1
94.8
3.92
7.5
70.5
48.9
0.69
3.16
81.3
22.3
3.5
9.0
3.1
7.3
62.2
4.35
47.3
96.8
4.19
8.0
67.3
47.0
0.70
3.64
79.7
18.5
4.8
12.0
5.6
13.0
64.3
4.41
49.3
97.8
4.28
8.3
68.2
47.6
0.70
3.54
80.3
19.3
4.6
15.0
9.1
21.0
66.4
4.46
51.2
98.8
4.36
8.5
69.1
48.3
0.70
3.45
80.9
20.1
4.4
9.0
3.0
6.9
69.8
4.50
54.4
100.3
4.54
9.0
66.0
46.0
0.70
3.93
79.4
16.8
6.0
12.0
5.5
12.6
72.4
4.55
56.9
101.5
4.66
9.3
66.9
46.8
0.70
3.83
79.9
17.5
5.7
15.0
8.9
20.6
75.0
4.60
59.3
102.7
4.78
9.5
67.7
47.6
0.70
3.73
80.4
18.2
5.4
9.0
2.8
6.5
76.2
4.59
60.6
103.3
4.87
10.2
62.2
45.0
0.72
4.45
77.4
14.0
7.6
12.0
5.3
12.3
78.2
4.65
62.3
104.2
4.93
10.5
63.1
45.7
0.72
4.25
77.6
14.9
7.2
15.0
8.8
20.2
80.1
4.70
64.1
105.1
5.00
10.7
64.1
46.3
0.72
4.11
78.1
15.6
6.8
9.0
2.7
6.1
82.7
4.68
66.8
106.3
5.18
11.4
58.4
43.9
0.75
4.86
75.0
12.0
9.5
12.0
5.2
11.9
84.0
4.74
67.8
106.9
5.19
11.8
59.3
44.6
0.75
4.64
75.2
12.8
9.0
15.0
8.6
19.9
85.3
4.80
68.9
107.5
5.21
12.2
60.5
45.0
0.74
4.49
75.9
13.5
8.6
9.0
2.5
5.8
12.0
5.0
11.5
56.1
43.4
Operation not recommended
0.77
5.15
73.7
10.9
11.2
15.0
8.4
19.5
57.0
43.7
0.77
4.99
74.0
11.4
10.6
52.3
41.8
53.4
42.4
9.0
2.3
5.4
12.0
4.8
11.2
Operation not recommended
15.0
8.3
19.1
9.0
2.2
5.0
12.0
4.7
10.8
48.0
39.9
0.83
6.25
15.0
8.1
18.8
49.0
40.5
0.83
6.07
Operation not recommended
0.80
5.63
71.6
9.3
13.8
0.79
5.48
72.1
9.7
13.1
69.3
7.7
16.6
69.7
8.1
15.9
Operation not recommended
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
32
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US070 - Performance Data
Single Speed PSC (2200 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
12.0
4.3
9.8
15.0
5.6
13.0
18.0
9.0
20.8
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
46.0
4.98
29.0
87.4
2.71
6.5
12.0
4.1
9.4
15.0
5.9
13.6
52.0
4.92
Operation not recommended
35.2
89.9
3.09
7.0
73.0
46.1
Operation not recommended
18.0
8.8
20.3
53.7
5.06
36.4
90.6
3.11
7.3
74.0
47.0
12.0
3.8
8.8
15.0
5.2
12.0
58.4
5.10
41.0
92.6
3.35
7.8
74.6
49.3
0.66
3.49
86.5
21.4
---
18.0
8.6
19.8
60.9
5.20
43.1
93.6
3.43
8.0
76.1
50.5
0.66
3.36
87.5
22.7
---
Operation not recommended
0.63
3.30
84.3
22.1
---
0.64
3.10
84.6
23.9
---
Operation not recommended
12.0
3.6
8.4
62.8
5.25
44.9
94.4
3.51
8.5
74.2
51.0
0.69
3.74
87.0
19.8
4.3
15.0
5.0
11.5
65.4
5.29
47.4
95.5
3.62
8.7
76.2
52.5
0.69
3.68
88.7
20.7
4.1
18.0
8.4
19.3
68.0
5.33
49.8
96.6
3.74
8.9
78.2
54.0
0.69
3.61
90.5
21.7
3.9
12.0
3.4
7.9
71.9
5.46
53.3
98.3
3.86
9.5
71.6
50.0
0.70
4.08
85.5
17.6
5.2
15.0
4.8
11.0
73.9
5.49
55.2
99.1
3.95
9.8
73.3
51.3
0.70
4.00
87.0
18.3
4.9
18.0
8.2
18.8
76.0
5.52
57.2
100.0
4.03
10.1
75.1
52.5
0.70
3.92
88.4
19.1
4.8
12.0
3.2
7.4
81.0
5.66
61.7
102.1
4.19
10.7
69.0
49.0
0.71
4.41
84.0
15.6
6.6
15.0
4.6
10.5
82.5
5.69
63.1
102.7
4.25
11.0
70.5
50.0
0.71
4.32
85.2
16.3
6.3
18.0
7.9
18.3
84.0
5.71
64.5
103.3
4.31
11.3
71.9
51.0
0.71
4.23
86.4
17.0
6.0
12.0
3.0
6.9
89.7
5.82
69.8
105.8
4.52
12.1
65.3
47.4
0.73
5.04
82.5
12.9
8.3
15.0
4.4
10.0
91.2
5.88
71.2
106.4
4.55
12.4
66.5
48.3
0.73
4.81
82.9
13.8
7.9
18.0
7.7
17.9
92.7
5.93
72.5
107.0
4.59
12.8
67.9
49.0
0.72
4.66
83.8
14.6
7.5
12.0
2.8
6.4
98.4
5.99
78.0
109.4
4.82
13.6
61.6
45.8
0.74
5.50
80.4
11.2
10.4
15.0
4.1
9.5
99.9
6.07
79.2
110.1
4.83
14.0
62.5
46.6
0.75
5.25
80.4
11.9
9.9
18.0
7.5
17.3
101.5
6.14
80.5
110.7
4.84
14.4
63.8
47.0
0.74
5.08
81.1
12.6
9.4
12.0
2.5
5.9
15.0
3.9
9.1
59.7
44.9
Operation not recommended
0.75
5.83
79.6
10.2
12.4
18.0
7.3
16.9
60.6
45.3
0.75
5.65
79.8
10.7
11.7
12.0
2.3
5.4
15.0
3.7
8.5
56.2
42.9
18.0
7.1
16.4
57.4
43.5
12.0
2.1
4.9
Operation not recommended
Operation not recommended
0.76
6.38
78.0
8.8
15.1
0.76
6.21
78.5
9.2
14.3
Operation not recommended
15.0
3.5
8.1
51.9
41.4
0.80
7.09
76.0
7.3
18.2
18.0
6.9
15.9
53.0
42.0
0.79
6.88
76.4
7.7
17.3
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
33
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US015 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (500 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
2.0
0.6
1.4
3.0
1.2
2.8
4.0
2.0
4.6
2.0
0.6
1.4
3.0
1.1
4.0
2.0
3.0
1.1
2.5
4.0
1.8
2.0
0.5
3.0
4.0
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
10.0
0.95
6.8
86.5
3.09
1.2
2.6
11.0
0.99
7.6
88.3
3.25
1.3
14.5
9.8
1.9
4.4
11.0
0.95
7.8
88.4
3.39
1.3
14.7
10.0
0.6
1.3
Operation not recommended
Operation not recommended
Operation not recommended
0.68
0.66
16.8
22.0
---
0.68
0.62
16.8
23.7
---
21.7
---
Operation not recommended
12.1
1.00
8.7
90.4
3.54
1.3
15.6
10.6
4.3
12.4
0.99
9.0
90.9
3.67
1.2
13.0
1.01
9.6
92.1
3.77
1.0
2.3
13.4
1.02
9.9
92.7
3.85
1.8
4.1
13.7
1.02
10.2
93.4
3.94
2.0
0.5
1.2
14.4
1.02
10.9
94.6
4.12
3.0
0.9
2.1
14.8
1.03
11.3
95.4
4.22
4.0
1.7
3.9
15.3
1.04
11.7
96.2
4.32
1.7
2.0
0.5
1.1
15.7
1.03
12.2
97.1
4.47
1.8
3.0
0.8
1.9
16.3
1.04
12.7
98.1
4.58
1.8
15.2
4.0
1.6
3.7
16.8
1.05
13.2
99.1
4.69
1.8
15.4
0.68
0.72
18.1
1.3
15.9
10.8
0.68
0.69
18.2
23.0
---
1.4
16.5
11.3
0.68
0.80
19.2
20.6
0.8
1.4
16.8
11.4
0.68
0.78
19.4
21.5
0.8
1.5
17.0
11.5
0.68
0.76
19.6
22.4
0.8
1.6
15.7
10.9
0.69
0.87
18.7
18.2
0.9
1.6
16.0
11.0
0.69
0.84
18.8
19.1
0.9
16.2
11.1
0.68
0.81
18.9
20.1
0.8
14.9
10.5
0.70
0.93
18.1
16.0
1.1
10.6
0.70
0.89
18.2
17.0
1.1
10.6
0.69
0.85
18.3
18.1
1.0
1.4
2.0
0.5
1.1
17.6
1.05
14.0
100.5
4.92
2.0
14.2
10.2
0.72
0.98
17.5
14.4
3.0
0.8
1.8
18.0
1.06
14.4
101.3
4.98
2.0
14.4
10.3
0.71
0.94
17.6
15.4
1.3
4.0
1.5
3.6
18.4
1.07
14.7
102.1
5.04
2.1
14.7
10.4
0.71
0.91
17.7
16.2
1.3
2.0
0.4
1.0
19.4
1.06
15.8
103.9
5.35
2.3
13.4
9.9
0.74
1.04
17.0
12.9
1.8
3.0
0.7
1.6
19.7
1.08
16.0
104.5
5.36
2.3
13.6
10.0
0.73
0.99
17.0
13.7
1.7
20.0
1.09
16.3
105.0
5.38
2.3
13.9
10.1
0.73
0.96
17.2
14.5
1.6
4.0
1.5
3.4
2.0
0.4
0.9
Operation not recommended
3.0
0.6
1.4
12.8
9.7
0.76
1.11
16.5
11.5
2.1
4.0
1.4
3.2
13.0
9.8
0.76
1.08
16.6
12.0
1.9
2.0
0.4
0.9
3.0
0.5
1.2
11.8
9.4
12.0
9.5
Operation not recommended
Operation not recommended
0.80
1.22
15.9
9.6
2.7
0.79
1.19
16.1
10.1
2.5
4.0
1.3
3.0
2.0
0.4
0.9
3.0
0.5
1.1
10.8
9.1
0.84
1.36
15.4
7.9
3.3
4.0
1.2
2.9
11.0
9.2
0.84
1.32
15.5
8.3
3.0
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
34
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US018 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (600 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.0
2.0
4.6
5.0
3.4
7.8
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
13.0
1.15
9.1
88.1
3.31
1.4
3.0
1.1
2.6
4.0
1.9
4.4
14.5
1.23
Operation not recommended
10.3
90.3
3.45
1.5
18.2
11.8
Operation not recommended
0.65
0.80
20.9
22.7
---
5.0
3.3
7.6
14.9
1.25
10.6
91.0
3.49
1.5
18.4
12.0
0.65
0.75
21.0
24.5
---
15.7
1.28
11.3
92.2
3.59
1.6
19.1
12.4
22.0
22.3
---
3.0
1.1
2.5
4.0
1.8
4.3
Operation not recommended
Operation not recommended
5.0
3.2
7.5
16.5
1.31
12.0
93.4
3.68
1.6
19.4
3.0
1.0
2.3
16.0
1.30
11.6
92.7
3.61
1.7
19.7
0.65
0.85
12.6
0.65
0.83
22.2
23.5
---
12.8
0.65
0.92
22.8
21.4
0.9
4.0
1.8
4.1
17.0
1.34
12.4
94.2
3.73
1.7
20.0
13.0
0.65
0.91
23.1
22.0
0.9
5.0
3.2
7.3
18.0
1.37
13.3
95.8
3.85
1.8
20.3
13.1
0.65
0.90
23.4
22.6
0.9
3.0
0.9
2.1
17.5
1.37
12.8
95.0
3.76
1.9
18.7
12.4
0.66
1.01
22.1
18.6
1.1
4.0
1.7
3.9
18.5
1.39
13.7
96.5
3.89
1.9
18.9
12.6
0.67
1.00
22.3
19.0
1.1
5.0
3.1
7.1
19.5
1.42
14.7
98.1
4.02
2.0
19.2
12.8
0.67
0.99
22.5
19.4
1.0
3.0
0.8
1.9
19.0
1.43
14.1
97.3
3.89
2.1
17.7
12.0
0.68
1.09
21.4
16.2
1.3
4.0
1.6
3.7
20.0
1.45
15.1
98.9
4.04
2.1
17.9
12.3
0.69
1.08
21.5
16.5
1.3
5.0
3.0
6.9
21.0
1.47
16.0
100.4
4.19
2.2
18.0
12.5
0.69
1.07
21.7
16.8
1.2
3.0
0.8
1.8
21.9
1.50
16.7
101.7
4.26
2.4
16.6
11.4
0.69
1.29
21.0
12.8
1.7
4.0
1.5
3.6
22.6
1.53
17.4
102.8
4.33
2.4
16.8
11.7
0.70
1.23
21.0
13.6
1.6
5.0
2.9
6.8
23.3
1.55
18.0
103.9
4.41
2.5
17.0
12.0
0.70
1.20
21.1
14.2
1.5
3.0
0.7
1.6
24.7
1.58
19.3
106.2
4.59
2.8
15.4
10.8
0.70
1.43
20.3
10.8
2.2
4.0
1.5
3.4
25.1
1.60
19.7
106.8
4.60
2.8
15.7
11.1
0.71
1.36
20.3
11.5
2.0
5.0
2.9
6.6
25.5
1.62
20.0
107.4
4.61
2.8
16.0
11.4
0.71
1.32
20.5
12.1
1.9
3.0
0.6
1.4
Operation not recommended
4.0
1.4
3.2
14.9
11.0
0.74
1.46
19.8
10.2
2.5
5.0
2.8
6.4
15.1
11.1
0.73
1.41
19.9
10.7
2.3
3.0
0.5
1.2
4.0
1.3
3.0
13.9
10.5
5.0
2.7
6.2
14.2
10.7
3.0
0.5
1.1
4.0
1.2
2.9
13.2
10.1
0.76
1.70
5.0
2.6
6.1
13.5
10.2
0.76
1.65
Operation not recommended
Operation not recommended
0.76
1.54
19.2
9.0
3.2
0.75
1.50
19.3
9.5
3.0
19.0
7.8
4.0
19.1
8.2
Operation not recommended
3.6
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
35
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US023 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (800 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
5.5
17.9
6.0
4.5
10.5
18.2
3.0
1.1
2.5
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
TC
MBtu/h
SC
MBtu/h
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
15.0
1.53
9.8
85.4
2.87
Operation not recommended
Operation not recommended
1.59
12.4
88.7
3.29
26.3
16.7
0.63
0.94
29.6
27.9
1.61
12.7
89.1
3.31
26.7
17.0
0.64
0.89
29.7
30.2
Operation not recommended
Operation not recommended
4.5
2.3
5.3
19.6
1.63
14.1
90.7
3.54
26.5
17.0
0.64
1.04
30.1
25.4
6.0
4.5
10.3
20.3
1.65
14.6
91.4
3.60
26.8
17.3
0.64
0.98
30.1
27.3
3.0
1.0
2.3
20.8
1.64
15.2
92.1
3.71
26.4
17.3
0.66
1.22
30.6
21.7
4.5
2.2
5.2
21.6
1.66
15.9
92.9
3.79
26.7
17.4
0.65
1.15
30.6
23.2
6.0
4.4
10.2
22.3
1.69
16.5
93.8
3.87
26.9
17.5
0.65
1.08
30.6
25.0
3.0
1.0
2.2
23.0
1.68
17.3
94.6
4.01
25.7
17.0
0.66
1.37
30.4
18.8
4.5
2.2
5.0
23.8
1.70
18.0
95.5
4.09
26.0
17.1
0.66
1.29
30.3
20.2
6.0
4.3
10.0
24.6
1.72
18.7
96.5
4.18
26.2
17.2
0.66
1.21
30.3
21.7
3.0
0.9
2.0
25.2
1.72
19.3
97.2
4.28
25.0
16.7
0.67
1.52
30.2
16.5
4.5
2.1
4.9
26.1
1.74
20.1
98.2
4.38
25.3
16.8
0.67
1.43
30.1
17.7
6.0
4.3
9.9
26.9
1.76
20.9
99.1
4.48
25.5
16.9
0.66
1.34
30.1
19.0
3.0
0.8
1.9
27.9
1.73
22.0
100.3
4.72
23.8
16.2
0.68
1.65
29.5
14.4
4.5
2.1
4.7
28.5
1.75
22.6
101.0
4.78
24.1
16.3
0.68
1.58
29.5
15.3
6.0
4.2
9.7
29.2
1.77
23.2
101.8
4.83
24.5
16.5
0.67
1.53
29.7
16.1
3.0
0.8
1.7
30.6
1.74
24.6
103.4
5.16
22.7
15.6
0.69
1.85
29.0
12.2
4.5
2.0
4.6
31.0
1.76
25.0
103.9
5.17
23.0
15.8
0.69
1.77
29.1
13.0
6.0
4.1
9.6
31.5
1.78
25.4
104.5
5.19
23.5
16.0
0.68
1.71
29.3
13.7
3.0
0.7
1.6
4.5
1.9
4.4
21.7
15.1
0.69
2.04
28.7
10.7
6.0
4.1
9.4
22.1
15.2
0.69
1.97
28.8
11.2
3.0
0.6
1.4
4.5
1.9
4.3
20.2
14.2
0.70
2.30
28.0
8.8
6.0
4.0
9.3
20.6
14.4
0.70
2.24
28.2
9.2
3.0
0.6
1.3
4.5
1.8
4.1
18.4
14.2
0.77
2.70
27.6
6.8
6.0
3.9
9.1
18.8
14.4
0.77
2.63
27.8
7.2
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
36
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US024 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (800 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
6.0
3.0
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
15.6
1.53
10.3
86.0
2.98
1.6
5.5
18.7
1.59
13.2
89.6
3.44
1.7
27.5
17.4
4.5
10.5
19.0
1.61
13.5
90.0
3.46
1.7
27.8
17.7
1.1
2.5
Operation not recommended
Operation not recommended
Operation not recommended
0.63
0.94
30.7
29.1
---
0.64
0.89
30.9
31.5
---
Operation not recommended
4.5
2.3
5.3
20.5
1.63
14.9
91.7
3.69
1.9
27.6
17.7
0.64
1.04
31.2
26.4
---
6.0
4.5
10.3
21.1
1.65
15.5
92.4
3.75
1.9
27.9
18.0
0.64
0.98
31.3
28.5
---
3.0
1.0
2.3
21.7
1.64
16.1
93.2
3.88
2.1
27.5
18.0
0.65
1.22
31.7
22.6
1.3
4.5
2.2
5.2
22.5
1.66
16.8
94.0
3.96
2.1
27.8
18.1
0.65
1.15
31.7
24.2
1.2
6.0
4.4
10.2
23.2
1.69
17.4
94.9
4.03
2.2
28.0
18.2
0.65
1.08
31.6
26.0
1.2
3.0
1.0
2.2
24.0
1.68
18.2
95.7
4.17
2.3
26.8
17.7
0.66
1.37
31.5
19.6
1.5
4.5
2.2
5.0
24.8
1.70
19.0
96.7
4.26
2.4
27.0
17.8
0.66
1.29
31.4
21.0
1.4
6.0
4.3
10.0
25.6
1.72
19.7
97.6
4.35
2.4
27.3
17.9
0.66
1.21
31.4
22.6
1.4
3.0
0.9
2.0
26.2
1.72
20.3
98.3
4.45
2.6
26.1
17.4
0.67
1.52
31.3
17.2
1.8
4.5
2.1
4.9
27.1
1.74
21.1
99.4
4.56
2.6
26.3
17.5
0.66
1.43
31.2
18.4
1.8
6.0
4.3
9.9
28.0
1.76
22.0
100.4
4.66
2.7
26.6
17.6
0.66
1.34
31.1
19.8
1.7
3.0
0.8
1.9
29.0
1.73
23.1
101.5
4.91
2.9
24.9
16.8
0.68
1.65
30.5
15.0
2.3
4.5
2.1
4.7
29.7
1.75
23.7
102.4
4.97
2.9
25.2
17.0
0.68
1.58
30.5
16.0
2.2
6.0
4.2
9.7
30.4
1.77
24.3
103.2
5.03
3.0
25.5
17.1
0.67
1.53
30.7
16.7
2.1
3.0
0.8
1.7
31.8
1.74
25.9
104.8
5.37
3.3
23.6
16.2
0.69
1.85
29.9
12.8
2.8
4.5
2.0
4.6
32.3
1.76
26.3
105.4
5.38
3.4
24.0
16.5
0.69
1.77
30.0
13.6
2.7
6.0
4.1
9.6
32.8
1.78
26.7
105.9
5.40
3.5
24.5
16.7
0.68
1.71
30.3
14.3
2.5
3.0
0.7
1.6
4.5
1.9
4.4
22.7
16.0
0.71
2.04
29.6
11.1
3.4
6.0
4.1
9.4
23.0
16.2
0.70
1.97
29.7
11.7
3.2
3.0
0.6
1.4
4.5
1.9
4.3
21.1
15.4
6.0
4.0
9.3
21.5
15.6
3.0
0.6
1.3
4.5
1.8
4.1
19.1
14.8
0.77
2.70
28.4
7.1
4.9
6.0
3.9
9.1
19.6
15.0
0.77
2.63
28.5
7.4
4.6
Operation not recommended
Operation not recommended
Operation not recommended
0.73
2.30
29.0
9.2
4.1
0.73
2.24
29.2
9.6
3.9
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
37
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US030 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1000 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
4.0
1.0
2.2
6.0
1.9
4.5
8.0
3.8
8.7
4.0
0.9
2.1
6.0
1.9
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
20.0
1.70
14.2
86.5
3.45
1.9
4.4
21.2
1.76
15.1
87.6
3.52
2.1
30.4
19.3
22.0
1.78
15.9
88.4
3.62
2.1
30.8
19.7
Operation not recommended
8.0
3.7
8.5
4.0
0.9
2.0
6.0
1.8
4.3
23.9
1.80
8.0
3.7
8.4
25.0
1.82
4.0
0.8
1.9
25.8
1.81
Operation not recommended
Operation not recommended
17.7
0.64
1.17
34.4
25.9
---
0.64
1.10
34.6
28.0
---
25.9
---
Operation not recommended
90.1
3.89
2.3
31.3
20.2
18.7
91.1
4.02
19.6
91.9
4.18
0.64
1.21
2.4
32.4
2.5
30.5
35.4
20.9
0.65
1.20
36.5
27.0
---
19.9
0.65
1.19
34.6
25.6
1.4
6.0
1.8
4.1
26.9
1.84
20.6
92.9
4.29
2.6
32.3
21.0
0.65
1.25
36.5
25.9
1.3
8.0
3.6
8.3
27.9
1.86
21.6
93.8
4.40
2.7
34.0
22.1
0.65
1.30
38.4
26.2
1.3
4.0
0.8
1.8
29.4
1.85
23.1
95.2
4.66
2.9
30.1
19.7
0.66
1.34
34.6
22.4
1.6
6.0
1.7
4.0
30.5
1.87
24.1
96.2
4.77
2.9
31.9
20.9
0.66
1.40
36.7
22.9
1.5
8.0
3.6
8.2
31.6
1.90
25.1
97.3
4.89
3.0
33.8
22.1
0.66
1.45
38.7
23.3
1.4
4.0
0.7
1.6
33.0
1.89
26.6
98.6
5.12
3.2
29.6
19.5
0.66
1.49
34.7
19.9
2.0
6.0
1.7
3.9
34.2
1.91
27.6
99.6
5.24
3.3
31.6
20.8
0.66
1.55
36.9
20.5
1.9
8.0
3.5
8.1
35.3
1.93
28.7
100.7
5.36
3.4
33.6
22.2
0.66
1.60
39.1
21.0
1.8
4.0
0.7
1.5
36.9
1.99
30.1
102.1
5.42
3.6
29.3
19.3
0.66
1.94
35.9
15.1
2.5
6.0
1.6
3.8
37.8
2.02
30.9
103.0
5.49
3.7
30.7
20.4
0.66
1.85
37.1
16.6
2.4
8.0
3.5
8.0
38.7
2.04
31.7
103.8
5.55
3.8
32.1
21.5
0.67
1.79
38.2
17.9
2.3
4.0
0.6
1.4
40.7
2.10
33.6
105.7
5.70
4.1
29.0
19.0
0.66
2.14
36.3
13.5
3.3
6.0
1.6
3.7
41.4
2.12
34.1
106.3
5.71
4.2
29.9
20.0
0.67
2.05
36.9
14.6
3.1
8.0
3.4
7.9
42.0
2.15
34.7
106.9
5.73
4.3
30.5
20.7
0.68
1.98
37.3
15.4
3.0
4.0
0.6
1.3
6.0
1.6
3.6
27.5
19.7
0.72
2.37
35.6
11.6
3.9
8.0
3.4
7.8
28.0
19.9
0.71
2.30
35.8
12.2
3.7
4.0
0.5
1.2
6.0
1.5
3.5
24.9
18.7
8.0
3.3
7.6
25.4
19.0
4.0
0.5
1.1
6.0
1.5
3.3
21.1
17.2
0.82
2.88
31.0
7.3
5.7
8.0
3.3
7.5
21.6
17.5
0.81
2.80
31.2
7.7
5.4
Operation not recommended
Operation not recommended
Operation not recommended
0.75
2.68
34.0
9.3
4.9
0.75
2.61
34.3
9.7
4.5
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
38
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US036 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1150 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.5
3.4
7.0
2.6
6.0
9.0
6.1
14.1
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
23.4
2.31
15.6
86.9
2.97
2.3
5.0
1.4
3.1
7.0
2.5
5.8
27.4
2.34
Operation not recommended
19.4
90.1
3.43
2.5
35.9
25.1
Operation not recommended
0.70
1.51
41.1
23.7
---
9.0
6.0
13.8
28.2
2.38
20.1
90.7
3.47
2.6
36.4
25.6
0.70
1.42
41.2
25.6
---
5.0
1.3
2.9
7.0
2.4
5.5
30.8
2.40
3.76
2.9
38.7
27.2
0.70
1.62
44.2
23.9
---
9.0
5.9
13.6
31.9
2.44
23.6
93.7
3.84
2.9
39.2
27.5
0.70
1.54
44.5
25.5
---
5.0
1.1
2.6
33.3
2.41
25.0
94.8
4.05
3.1
40.9
29.1
0.71
1.78
47.0
23.0
1.6
Operation not recommended
22.6
92.8
Operation not recommended
7.0
2.3
5.2
34.5
2.46
26.1
95.8
4.12
3.2
41.5
29.2
0.70
1.72
47.3
24.1
1.5
9.0
5.8
13.3
35.7
2.50
27.2
96.7
4.18
3.3
42.0
29.4
0.70
1.66
47.7
25.3
1.5
5.0
1.0
2.4
37.7
2.48
29.2
98.3
4.45
3.5
39.2
28.5
0.73
1.97
46.0
19.9
2.0
7.0
2.2
5.0
39.0
2.52
30.4
99.4
4.54
3.6
39.9
28.7
0.72
1.90
46.4
21.0
1.9
9.0
5.7
13.1
40.2
2.55
31.5
100.4
4.62
3.6
40.5
28.9
0.71
1.84
46.8
22.1
1.8
5.0
0.9
2.1
42.1
2.55
33.4
101.9
4.84
3.9
37.6
27.9
0.74
2.16
44.9
17.4
2.5
7.0
2.1
4.7
43.5
2.58
34.7
103.0
4.95
4.0
38.3
28.2
0.74
2.09
45.4
18.4
2.4
9.0
5.5
12.8
44.8
2.60
35.9
104.1
5.05
4.1
39.0
28.5
0.73
2.01
45.9
19.4
2.3
5.0
0.8
1.8
46.7
2.62
37.8
105.6
5.23
4.4
36.1
27.1
0.75
2.42
44.3
14.9
3.2
7.0
1.9
4.5
47.7
2.65
38.7
106.4
5.29
4.5
36.7
27.6
0.75
2.31
44.6
15.9
3.0
9.0
5.4
12.5
48.8
2.68
39.7
107.3
5.35
4.6
37.4
28.0
0.75
2.24
45.0
16.7
2.9
5.0
0.7
1.6
51.2
2.68
42.1
109.3
5.60
4.9
34.5
26.3
0.76
2.66
43.6
13.0
3.9
7.0
1.8
4.2
52.0
2.72
42.8
109.9
5.61
5.1
35.1
27.0
0.77
2.54
43.8
13.8
3.7
9.0
5.3
12.3
52.8
2.75
43.5
110.5
5.63
5.2
35.8
27.5
0.77
2.46
44.2
14.6
3.6
5.0
0.6
1.3
Operation not recommended
7.0
1.7
4.0
33.3
26.4
0.79
2.86
43.0
11.7
4.6
9.0
5.2
12.0
33.8
26.6
0.79
2.77
43.2
12.2
4.4
5.0
0.5
1.1
7.0
1.6
3.7
31.2
25.3
9.0
5.1
11.8
31.8
25.7
5.0
0.4
0.8
Operation not recommended
Operation not recommended
0.81
3.16
41.9
9.9
5.7
0.81
3.07
42.3
10.4
5.4
Operation not recommended
7.0
1.5
3.5
26.5
22.7
0.85
3.53
38.6
7.5
6.8
9.0
5.0
11.5
27.1
23.0
0.85
3.43
38.8
7.9
6.4
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
39
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US041 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1300 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
25.7
2.61
16.8
85.0
2.89
3.5
5.0
1.5
3.4
8.0
3.4
7.8
28.5
2.61
Operation not recommended
19.6
86.9
3.20
3.7
41.8
30.4
Operation not recommended
11.0
7.9
18.1
29.5
2.66
20.4
87.5
3.26
3.8
42.4
31.0
5.0
1.3
3.0
Operation not recommended
0.73
1.71
47.7
24.5
---
0.73
1.61
47.9
26.4
---
Operation not recommended
8.0
3.2
7.5
31.7
2.67
22.6
89.0
3.48
4.0
43.8
31.4
0.72
1.85
50.2
23.7
---
11.0
7.7
17.8
33.1
2.71
23.8
89.9
3.58
4.1
44.5
31.9
0.72
1.75
50.4
25.5
---
5.0
1.2
2.7
33.7
2.72
24.4
90.3
3.64
4.4
45.2
32.0
0.71
2.11
52.4
21.5
2.4
8.0
3.1
7.1
35.2
2.74
25.8
91.2
3.77
4.5
45.9
32.4
0.71
2.00
52.7
23.0
2.4
11.0
7.5
17.4
36.6
2.76
27.2
92.2
3.89
4.7
46.5
32.7
0.70
1.89
52.9
24.7
2.3
5.0
1.0
2.3
37.9
2.78
28.4
93.0
3.99
5.0
44.2
31.5
0.71
2.36
52.2
18.7
3.0
8.0
2.9
6.7
39.3
2.80
29.7
94.0
4.11
5.1
45.1
31.8
0.70
2.23
52.7
20.3
2.8
11.0
7.4
17.0
40.7
2.82
31.1
94.9
4.23
5.3
46.1
32.1
0.70
2.09
53.2
22.1
2.7
5.0
0.9
2.0
42.0
2.85
32.3
95.8
4.33
5.6
43.1
30.9
0.72
2.62
52.0
16.5
3.8
8.0
2.8
6.4
43.4
2.87
33.6
96.7
4.44
5.7
44.4
31.2
0.70
2.46
52.8
18.1
3.6
11.0
7.2
16.7
44.8
2.89
35.0
97.6
4.55
5.9
45.7
31.5
0.69
2.30
53.5
19.9
3.4
5.0
0.7
1.6
46.9
2.91
37.0
99.0
4.73
6.3
41.7
30.4
0.73
2.80
51.2
14.9
4.8
8.0
2.6
6.0
48.0
2.94
38.0
99.8
4.79
6.5
42.6
30.6
0.72
2.67
51.7
16.0
4.5
11.0
7.1
16.3
49.2
2.97
39.0
100.5
4.85
6.7
43.7
30.8
0.70
2.59
52.5
16.9
4.3
5.0
0.5
1.2
51.9
2.98
41.7
102.3
5.11
7.1
40.2
29.8
0.74
3.11
50.9
12.9
6.0
8.0
2.5
5.7
52.7
3.02
42.4
102.9
5.12
7.3
40.9
30.0
0.73
2.97
51.0
13.8
5.7
11.0
6.9
16.0
53.5
3.06
43.1
103.4
5.13
7.5
41.7
30.1
0.72
2.88
51.5
14.5
5.5
5.0
0.4
0.9
8.0
2.3
5.3
38.2
29.0
Operation not recommended
0.76
3.34
49.6
11.4
7.1
11.0
6.8
15.6
38.8
29.2
0.75
3.24
49.8
12.0
6.8
5.0
0.4
0.9
8.0
2.1
4.9
35.2
27.9
11.0
6.6
15.2
35.9
28.3
5.0
0.4
0.9
8.0
2.0
4.6
31.8
27.1
0.85
4.34
46.6
7.3
10.4
11.0
6.5
14.9
32.5
27.5
0.85
4.22
46.9
7.7
10.0
Operation not recommended
Operation not recommended
0.79
3.70
47.8
9.5
8.6
0.79
3.60
48.2
10.0
8.3
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
40
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US042 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1400 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
27.0
2.61
18.1
85.9
3.04
3.5
5.0
1.5
3.4
8.0
3.4
7.8
30.0
2.61
Operation not recommended
21.1
87.8
3.37
3.7
43.6
31.7
Operation not recommended
11.0
7.9
18.1
31.0
2.66
21.9
88.5
3.42
3.8
44.2
32.3
5.0
1.3
3.0
Operation not recommended
0.73
1.71
49.4
25.5
---
0.73
1.61
49.7
27.5
---
Operation not recommended
8.0
3.2
7.5
33.4
2.67
24.2
90.1
3.66
4.0
45.7
32.7
0.72
1.85
52.0
24.7
---
11.0
7.7
17.8
34.8
2.71
25.5
91.0
3.77
4.1
46.3
33.2
0.72
1.75
52.3
26.5
---
5.0
1.2
2.7
35.5
2.72
26.2
91.5
3.83
4.4
47.1
33.4
0.71
2.11
54.3
22.4
2.4
8.0
3.1
7.1
37.0
2.74
27.7
92.5
3.96
4.5
47.8
33.8
0.71
2.00
54.6
23.9
2.4
11.0
7.5
17.4
38.5
2.76
29.1
93.5
4.10
4.7
48.4
34.1
0.70
1.89
54.8
25.7
2.3
5.0
1.0
2.3
39.9
2.78
30.4
94.4
4.20
5.0
46.0
32.8
0.71
2.36
54.1
19.5
3.0
8.0
2.9
6.7
41.4
2.80
31.8
95.3
4.33
5.1
47.0
33.1
0.70
2.23
54.6
21.1
2.8
11.0
7.4
17.0
42.9
2.82
33.2
96.3
4.45
5.3
48.0
33.5
0.70
2.09
55.1
23.0
2.7
5.0
0.9
2.0
44.2
2.85
34.5
97.2
4.55
5.6
44.9
32.2
0.72
2.62
53.8
17.2
3.8
8.0
2.8
6.4
45.7
2.87
35.9
98.2
4.68
5.7
46.3
32.5
0.70
2.46
54.6
18.8
3.6
11.0
7.2
16.7
47.2
2.89
37.4
99.2
4.79
5.9
47.6
32.8
0.69
2.30
55.4
20.7
3.4
5.0
0.7
1.6
49.4
2.91
39.5
100.7
4.97
6.3
43.4
31.6
0.73
2.80
53.0
15.5
4.8
8.0
2.6
6.0
50.6
2.94
40.5
101.5
5.04
6.5
44.4
31.9
0.72
2.67
53.6
16.6
4.5
11.0
7.1
16.3
51.8
2.97
41.6
102.2
5.11
6.7
45.6
32.1
0.70
2.59
54.4
17.6
4.3
5.0
0.5
1.2
54.6
2.98
44.4
104.1
5.37
7.1
42.0
31.0
0.74
3.11
52.6
13.5
6.0
8.0
2.5
5.7
55.5
3.02
45.2
104.7
5.39
7.3
42.6
31.2
0.73
2.97
52.8
14.3
5.7
11.0
6.9
16.0
56.3
3.06
45.9
105.2
5.40
7.5
43.5
31.4
0.72
2.88
53.3
15.1
5.5
5.0
0.4
0.9
8.0
2.3
5.3
39.8
30.2
Operation not recommended
0.76
3.34
51.2
11.9
7.1
11.0
6.8
15.6
40.5
30.5
0.75
3.24
51.5
12.5
6.8
5.0
0.4
0.9
8.0
2.1
4.9
36.7
29.1
11.0
6.6
15.2
37.4
29.5
5.0
0.4
0.9
8.0
2.0
4.6
33.2
28.2
0.85
4.34
48.0
7.6
10.4
11.0
6.5
14.9
33.9
28.6
0.84
4.22
48.3
8.0
10.0
Operation not recommended
Operation not recommended
0.79
3.70
49.3
9.9
8.6
0.79
3.60
49.7
10.4
8.3
Operation not recommended
11/10/09
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
41
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US048 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1600 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
6.0
2.2
5.1
9.0
4.4
10.0
12.0
6.8
15.8
6.0
2.0
4.7
9.0
4.2
12.0
6.0
9.0
4.0
9.2
40.1
3.25
29.0
92.8
3.62
5.4
53.1
34.8
0.65
2.29
60.9
23.2
---
12.0
6.5
15.0
41.9
3.29
30.7
93.9
3.74
5.5
54.0
35.5
0.66
2.16
61.4
25.0
---
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
30.8
3.09
20.2
87.0
2.92
4.6
9.6
35.3
3.12
24.6
89.8
3.31
4.9
50.3
31.3
6.7
15.5
35.8
3.15
25.1
90.1
3.33
5.0
51.0
31.9
1.9
4.3
Operation not recommended
Operation not recommended
Operation not recommended
0.62
2.09
57.4
24.1
---
0.63
1.96
57.7
26.0
---
Operation not recommended
6.0
1.7
3.9
42.9
3.32
31.6
94.5
3.79
5.9
54.9
37.4
0.68
2.61
63.8
21.0
2.9
9.0
3.8
8.8
45.5
3.38
34.0
96.1
3.95
6.1
56.0
38.3
0.68
2.49
64.4
22.5
2.8
12.0
6.3
14.6
48.1
3.43
36.4
97.7
4.11
6.2
57.0
39.1
0.69
2.36
65.1
24.1
2.7
6.0
1.5
3.5
49.5
3.47
37.7
98.6
4.18
6.7
54.5
37.4
0.69
2.91
64.4
18.7
3.5
9.0
3.6
8.4
52.2
3.52
40.2
100.2
4.35
6.8
55.4
38.0
0.69
2.76
64.8
20.0
3.4
12.0
6.1
14.1
54.9
3.56
42.8
101.9
4.52
7.0
56.2
38.6
0.69
2.62
65.1
21.5
3.2
6.0
1.3
3.0
56.1
3.62
43.7
102.6
4.54
7.5
54.1
37.3
0.69
3.20
65.0
16.9
4.5
9.0
3.5
8.0
58.9
3.65
46.5
104.4
4.73
7.7
54.8
37.7
0.69
3.04
65.1
18.0
4.3
12.0
5.9
13.7
61.7
3.68
49.2
106.1
4.91
7.9
55.4
38.2
0.69
2.87
65.2
19.3
4.0
6.0
1.1
2.6
61.3
3.70
48.7
105.8
4.86
8.4
51.4
35.8
0.70
3.48
63.2
14.8
5.6
9.0
3.3
7.6
63.2
3.74
50.5
107.0
4.96
8.6
52.1
36.4
0.70
3.31
63.4
15.7
5.3
12.0
5.8
13.3
65.2
3.78
52.3
108.2
5.05
8.9
52.9
36.9
0.70
3.21
63.9
16.5
5.1
6.0
1.0
2.2
66.5
3.78
53.6
109.1
5.16
9.4
48.7
34.3
0.70
3.84
61.8
12.7
7.0
9.0
3.1
7.1
67.5
3.83
54.5
109.7
5.17
9.7
49.4
35.0
0.71
3.66
61.9
13.5
6.7
12.0
5.6
12.9
68.6
3.87
55.4
110.3
5.19
10.1
50.4
35.6
0.70
3.54
62.5
14.2
6.4
6.0
0.8
1.8
9.0
2.9
6.7
46.7
34.3
0.74
4.14
60.8
11.3
8.4
12.0
5.4
12.5
47.4
34.6
0.73
4.00
61.0
11.8
8.0
6.0
0.6
1.4
9.0
2.7
6.3
43.4
33.2
12.0
5.2
12.1
44.3
33.7
6.0
0.4
1.0
Operation not recommended
Operation not recommended
Operation not recommended
0.76
4.59
59.1
9.5
10.3
0.76
4.46
59.5
9.9
9.7
Operation not recommended
9.0
2.6
5.9
40.1
32.0
0.80
5.16
57.7
7.8
12.4
12.0
5.0
11.6
41.0
32.5
0.79
5.01
58.1
8.2
11.8
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
42
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US060 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (2000 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
9.0
3.8
8.7
12.0
6.3
14.5
15.0
9.7
22.5
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
41.9
3.96
28.4
87.4
3.10
5.5
9.0
3.6
8.4
12.0
6.1
14.1
43.8
3.89
Operation not recommended
30.5
88.3
3.30
5.9
72.0
49.1
Operation not recommended
15.0
9.6
22.2
46.5
4.01
32.8
89.5
3.39
6.1
73.0
50.0
9.0
3.5
8.0
12.0
6.0
13.7
49.7
4.03
35.9
91.0
3.62
6.6
70.8
48.8
0.69
3.01
15.0
9.4
21.7
52.2
4.12
38.1
92.2
3.71
6.7
71.8
49.5
0.69
2.87
Operation not recommended
0.68
2.86
81.8
25.2
---
0.68
2.68
82.2
27.2
---
81.0
23.5
---
81.6
25.0
---
Operation not recommended
9.0
3.3
7.6
54.6
4.10
40.6
93.3
3.90
7.1
68.5
48.0
0.70
3.24
79.6
21.1
3.9
12.0
5.8
13.4
56.2
4.16
42.0
94.0
3.96
7.3
69.5
48.5
0.70
3.15
80.3
22.0
3.7
15.0
9.2
21.3
57.8
4.22
43.4
94.8
4.01
7.5
70.5
48.9
0.69
3.06
81.0
23.0
3.5
9.0
3.1
7.3
62.2
4.25
47.7
96.8
4.28
8.0
67.3
47.0
0.70
3.54
79.3
19.0
4.8
12.0
5.6
13.0
64.3
4.31
49.6
97.8
4.37
8.3
68.2
47.6
0.70
3.44
79.9
19.8
4.6
15.0
9.1
21.0
66.4
4.36
51.5
98.8
4.46
8.5
69.1
48.3
0.70
3.35
80.5
20.6
4.4
9.0
3.0
6.9
69.8
4.40
54.8
100.3
4.64
9.0
66.0
46.0
0.70
3.83
79.1
17.2
6.0
12.0
5.5
12.6
72.4
4.45
57.2
101.5
4.76
9.3
66.9
46.8
0.70
3.73
79.6
17.9
5.7
15.0
8.9
20.6
75.0
4.50
59.6
102.7
4.88
9.5
67.7
47.6
0.70
3.63
80.1
18.6
5.4
9.0
2.8
6.5
76.2
4.50
60.9
103.3
4.97
10.2
62.2
45.0
0.72
4.35
77.0
14.3
7.6
12.0
5.3
12.3
78.2
4.55
62.7
104.2
5.04
10.5
63.1
45.7
0.72
4.15
77.2
15.2
7.2
15.0
8.8
20.2
80.1
4.60
64.4
105.1
5.10
10.7
64.1
46.3
0.72
4.01
77.8
16.0
6.8
9.0
2.7
6.1
82.7
4.59
67.1
106.3
5.29
11.4
58.4
43.9
0.75
4.76
74.7
12.3
9.5
12.0
5.2
11.9
84.0
4.65
68.1
106.9
5.30
11.8
59.3
44.6
0.75
4.54
74.8
13.1
9.0
15.0
8.6
19.9
85.3
4.70
69.2
107.5
5.31
12.2
60.5
45.0
0.74
4.39
75.5
13.8
8.6
9.0
2.5
5.8
12.0
5.0
11.5
56.1
43.4
Operation not recommended
0.77
5.05
73.4
11.1
11.2
15.0
8.4
19.5
57.0
43.7
0.77
4.89
73.7
11.7
10.6
52.3
41.8
53.4
42.4
9.0
2.3
5.4
12.0
4.8
11.2
Operation not recommended
15.0
8.3
19.1
9.0
2.2
5.0
12.0
4.7
10.8
48.0
39.9
0.83
6.15
15.0
8.1
18.8
49.0
40.5
0.83
5.97
Operation not recommended
0.80
5.53
71.2
9.5
13.8
0.79
5.38
71.8
9.9
13.1
69.0
7.8
16.6
69.4
8.2
15.9
Operation not recommended
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
43
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
US070 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (2200 cfm)
WPD
EWT
°F
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
12.0
4.3
9.8
15.0
5.6
13.0
18.0
9.0
20.8
HC
Power
HE
MBtu/h
kW
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
S/T
Ratio
Power
HR
kW
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20
30
40
50
60
70
80
90
100
110
120
Operation not recommended
46.0
4.88
29.3
87.4
2.76
6.5
12.0
4.1
9.4
15.0
5.9
13.6
52.0
4.82
Operation not recommended
35.5
89.9
3.16
7.0
73.0
46.1
Operation not recommended
18.0
8.8
20.3
53.7
4.96
36.8
90.6
3.17
7.3
74.0
47.0
12.0
3.8
8.8
15.0
5.2
12.0
58.4
5.00
41.3
92.6
3.42
7.8
74.6
49.3
0.66
3.38
18.0
8.6
19.8
60.9
5.10
43.5
93.6
3.50
8.0
76.1
50.5
0.66
3.25
Operation not recommended
0.63
3.18
83.9
22.9
---
0.64
2.99
84.2
24.7
---
86.1
22.1
---
87.2
23.4
---
Operation not recommended
12.0
3.6
8.4
62.8
5.15
45.2
94.4
3.57
8.5
74.2
51.0
0.69
3.64
86.6
20.4
4.3
15.0
5.0
11.5
65.4
5.19
47.7
95.5
3.69
8.7
76.2
52.5
0.69
3.58
88.4
21.3
4.1
18.0
8.4
19.3
68.0
5.23
50.2
96.6
3.81
8.9
78.2
54.0
0.69
3.51
90.2
22.3
3.9
12.0
3.4
7.9
71.9
5.36
53.6
98.3
3.94
9.5
71.6
50.0
0.70
3.98
85.2
18.0
5.2
15.0
4.8
11.0
73.9
5.39
55.6
99.1
4.02
9.8
73.3
51.3
0.70
3.90
86.6
18.8
4.9
18.0
8.2
18.8
76.0
5.42
57.5
100.0
4.11
10.1
75.1
52.5
0.70
3.82
88.1
19.7
4.8
12.0
3.2
7.4
81.0
5.56
62.0
102.1
4.27
10.7
69.0
49.0
0.71
4.31
83.7
16.0
6.6
15.0
4.6
10.5
82.5
5.59
63.4
102.7
4.33
11.0
70.5
50.0
0.71
4.22
84.9
16.7
6.3
18.0
7.9
18.3
84.0
5.61
64.8
103.3
4.39
11.3
71.9
51.0
0.71
4.13
86.0
17.4
6.0
12.0
3.0
6.9
89.7
5.72
70.2
105.8
4.59
12.1
65.3
47.4
0.73
4.93
82.1
13.2
8.3
15.0
4.4
10.0
91.2
5.78
71.5
106.4
4.63
12.4
66.5
48.3
0.73
4.71
82.6
14.1
7.9
18.0
7.7
17.9
92.7
5.83
72.9
107.0
4.67
12.8
67.9
49.0
0.72
4.56
83.4
14.9
7.5
12.0
2.8
6.4
98.4
5.89
78.3
109.4
4.90
13.6
61.6
45.8
0.74
5.39
80.0
11.4
10.4
15.0
4.1
9.5
99.9
5.97
79.6
110.1
4.91
14.0
62.5
46.6
0.75
5.15
80.1
12.2
9.9
18.0
7.5
17.3
101.5
6.04
80.9
110.7
4.92
14.4
63.8
47.0
0.74
4.98
80.8
12.8
9.4
12.0
2.5
5.9
15.0
3.9
9.1
59.7
44.9
18.0
7.3
16.9
60.6
45.3
12.0
2.3
5.4
15.0
3.7
8.5
18.0
7.1
16.4
12.0
2.1
4.9
Operation not recommended
0.75
5.73
79.2
10.4
12.4
0.75
5.55
79.5
10.9
11.7
Operation not recommended
Operation not recommended
56.2
42.9
57.4
43.5
0.76
6.28
77.6
8.9
15.1
0.76
6.11
78.2
9.4
14.3
Operation not recommended
15.0
3.5
8.1
51.9
41.4
0.80
6.98
75.7
7.4
18.2
18.0
6.9
15.9
53.0
42.0
0.79
6.78
76.1
7.8
17.3
7/6/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
44
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Wiring Schematics
Aurora Base Control 208-230/60/1 PSC with IntelliStart
Compressor
S
PSC
Blower
Motor
C
Black
R
Blue
Cap
Grn
Red
Run Winding
Pink
Active
Soft Start
Blue
Red
Brn Wht
Tan
Pink
Blue
Start Winding
Black
Common Winding
Unit Power Supply
208-230/60/1
G
Cap
P3
3 Airflow
Settings
H
M
T2
T1
CC
L2
L
Note 1
L1
Green (93)
Black
White
Black
1
RB
3
Black
Black (95)
L1
L1
Red (97)
L2
L2
L3
L3
Red
208V
Note 2
Blue
230V
Ground
Neutral
Disconnect
Black
Transformer
24V
Yellow
Black/White
Ÿ
Resistor
FD
RB
CC
LP
HP
T
RV
Black (10)
Black (09)
Blue (08)
Blue (07)
Yellow
Yellow
Orange (02)
Orange (01)
Black (15)
1
Violet (14)
White (12)
2
Black (13)
Note 3
Isolation
Valve
Ÿ
RV
3
DH W Y2 Y1 G O/B C
R LO P9
R
JW2
Red
(51)
Green
(50)
White
(52)
F FG CC CCG
CC2 CC2 CC2 P5
HI LO G
REV REV FP1 FP1 FP2 FP2 LPS LPS HPS HPS P4
C
P2
K3
ES
K4
LS
ALM
K1
R
K2
Black/White
Yellow
F
K5
ALG
PWM
ACC COM
ACC NO
ACC NC
K6
Aurora Base Control
(ABC)
LO
R
SW1
CFM
Status
G
C
Red (53)
Note 3
P13
Fault
R
C
O/B
G
FP1 – 15°F/30°F
FP2 – 15°F/30°F
RV – B/O
Acc – Dip 1
Acc – Dip 2
CC – Dual/Single
L – Pulse/Continuous
Reheat/Normal
Y1
Y2
W
DH
P1
LED4
F1
C
Config
Y
G
RS485 NET
P8
C
R
A- B+ P7
C
R
A- B+ P6 N/A CO C EH1 C EH2 P3
Y1 G
CC
Legend
Factory Low Voltage Wiring
Factory Line Voltage Wiring
Field Low Voltage Wiring
Field Line Voltage Wiring
Optional Block
DC Voltage PCB Traces
Field Zone Sensor Wiring
Internal Junction
Quick Connect Terminal
Condensate
Field Wiring Lug
Switch - High pressure
Switch - Low pressure
1
L1
Relay Coil
Switch - Condensate Overflow
2
Aurora LED Flash Codes
1 second on and 1 second off
100 milliseconds on and 100 milliseconds off
100 milliseconds on and 400 milliseconds off with a 2 second pause before repeating
Random Start Delay
Fast Flash
Status LED (LED1, Green)
Fast Flash
Configuration LED (LED2, Yellow)
Fast Flash
Fault LED (LED3, Red)
Configuration LED (LED2, Yellow)
Fault LED (LED3, Red)
Status LED (LED1, Green)
No Software Overide
Flash ECM Setting Normal Mode
OFF
ON
Normal Mode
DIP Switch Overide
Slow Flash
Input Fault Lockout
Flash Code 1
OFF
Control is Non-Functional
Fast Flash
High Pressure Lockout
Flash Code 2
Slow Flash ECM Configure Mode
Test Mode
Off
Low Pressure Lockout
Flash Code 3
Fast Flash Reset Configure Mode
Lockout Active
Flash Code 4
Low Air Coil Limit Lockout - FP2
Flash Code 2
Dehumidification Mode
Low Water Coil Limit Lockout - FP1 Flash Code 5
Flash Code 3
Reserved
Reserved
Flash Code 6
Flash Code 4
Reserved
Flash Code 7
Flash Code 5
Condensate Overflow Lockout
Load Shed
Over/Under Voltage Shutdown
Flash Code 8
Flash Code 6
ESD
Flash Code 9
Reserved
Flash Code 7
Reserved
Flash Code 10
Reserved
Air/Water Coil Limit Sensor Error
Flash Code 11
Slow Flash
Fast Flash
Flash Code
Thermistor
T
3
Aurora Timing Events
Test Mode
Normal Mode
Event
5 to 80 seconds
1 second
Random Start Delay
5 seconds
< 1 second
Compressor On Delay
2 minutes
5 seconds
Compressor Minimum On Time
4 minutes
15 seconds
Compressor Short Cycle Delay
30 seconds
2 seconds
Blower Off Delay
Less than 1 second Less than 1 second
Fault Recognition Delay – High Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Pressure
30 seconds
30 seconds
Fault Recognition Delay – Low Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Condensate Overflow
2 seconds
2 seconds
Thermostat Call Recognition Time
5 minutes
20 seconds
Auxiliary Heat Staging Delay
2 minutes
7.5 seconds
Emergency Heat Staging Delay
90 seconds
90 seconds
Water Valve Slow Open Delay
30 seconds
30 seconds
Reheat Delay
RS485 EXP
Notes:
1 – Optional, factory installed unit mounted disconnect.
2 – Swap blue and red leads for 208V operation.
3 – Optional, factory installed internal isolation valve.
Brown (23)
Green
Accessory Relay
Operation
SW2-4 SW2-5
On
On
Cycle with Blower
Off
Off
Cycle with Compressor
Off
On
Water Valve Slow Open
Off
On
Outdoor Air Damper
On
1
2
3
4
5
6
7
8
SW2
LED5
G
RS485 NET
R
Off
Polarized connector
Ground
G
Light Emitting Diode - Green
Capacitor
Y
Light Emitting Diode - Yellow
Fuse
R
Light Emitting Diode - Red
Relay Contacts – N.O., N.C.
CC – Compressor Contactor
CO – Condensate Overflow Sensor
ES – Emergency Shutdown
HP – High Pressure Switch
LP – Low Pressure Switch
FD – Freeze Detection Sensor
F1 – Fuse
SW1 – Push button
SW2 – DIP package 8 position
RB – Blower Relay
RV – Reversing Valve Coil
97P817-02
11/08/10
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
45
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Wiring Schematics cont.
Aurora Base Control 460/60/3 5-Speed ECM
T3
Note 4
T1
T2
Red
Phase
Guard
Monitor
(PGM)
L1 L2 L3
Black
Yellow
T3
T2
Unit Power Supply
460/60/3
G
T1
CC
L3
L2
L1
Note 1
Black (7)
Green (93)
Ground
Neutral
Disconnect
White (8)
Red (9)
L1
L1
Yellow (96)
L2
L2
Red (97)
L3
L3
Green
G
Black (95)
Black
N
Brown
Orange
5-Speed ECM
Blower
Motor
L
Blue
460V
Note 5
Transformer
PGM
Y-OUT
Y
5
24V
4
3
2
1
C
Black/White
C
Yellow
Note 5
Black/White (92)
Note 6
Yellow (91)
Gray (30)
Tan (31)
Red (32)
Blue (33)
Black (35)
RV
Ÿ
Resistor
FD
LP
HP
Ÿ
T
RV
CC
Note 2
REV REV FP1 FP1 FP2 FP2 LPS LPS HPS HPS P4
C
P2
K3
ES
K4
LS
ALM
5-Speed ECM Low Voltage Connections
Model TAP-1 TAP-2 TAP-3 TAP-4 TAP-5
015
Blue
Red
Gray
018
Blue
Red
Gray
023
Blue
Red
Gray
024
Blue
Red
Gray
030
Blue
Red
Gray
036
Blue
Red
Gray
041
Blue
Red
Gray
042
Blue
Red
Gray
048
Blue
Red
Gray
060
Blue
Red
Gray
070
Blue
Red
Gray
Black (10)
Black (09)
Blue (08)
CC2 CC2 CC2 P5
HI LO G
Blue (07)
F FG CC CCG
Yellow
R
Yellow
R LO P9
JW2
DH W Y2 Y1 G O/B C
Orange (02)
3
Orange (01)
1
Red
(51)
Green
(50)
White
(52)
Black (15)
2
Violet (14)
Isolation
Valve
K1
R
K2
Black/White
Yellow
F
K5
ALG
PWM
ACC COM
ACC NO
ACC NC
K6
Aurora Base Control
(ABC)
LO
R
CFM
SW1
Status
G
Notes:
C
Red (53)
Note 2
P13
Fault
R
C
O/B
G
FP1 – 15°F/30°F
FP2 – 15°F/30°F
RV – B/O
Acc – Dip 1
Acc – Dip 2
CC – Dual/Single
L – Pulse/Continuous
Reheat/Normal
Y1
Y2
W
DH
P1
LED4
F1
LED5
G
C
Config
Y
G
RS485 NET
R
RS485 EXP
RS485 NET
P8
C
R
A- B+ P7
A- B+ P6 N/A CO C EH1 C EH2 P3
Y1 G
CC
Legend
Factory Low Voltage Wiring
Factory Line Voltage Wiring
Field Low Voltage Wiring
Field Line Voltage Wiring
Optional Block
DC Voltage PCB Traces
Field Zone Sensor Wiring
Internal Junction
Quick Connect Terminal
Condensate
Aurora LED Flash Codes
Switch - Condensate Overflow
Switch - High pressure
Switch - Low pressure
1
L1
Field Wiring Lug
Relay Coil
2
1 second on and 1 second off
100 milliseconds on and 100 milliseconds off
100 milliseconds on and 400 milliseconds off with a 2 second pause before repeating
Random Start Delay
Fast Flash
Status LED (LED1, Green)
Fast Flash
Configuration LED (LED2, Yellow)
Fast Flash
Fault LED (LED3, Red)
Configuration LED (LED2, Yellow)
Fault LED (LED3, Red)
Status LED (LED1, Green)
No Software Overide
Flash ECM Setting Normal Mode
OFF
ON
Normal Mode
DIP Switch Overide
Slow Flash
Input Fault Lockout
Flash Code 1
OFF
Control is Non-Functional
Fast Flash
High Pressure Lockout
Flash Code 2
Slow Flash ECM Configure Mode
Test Mode
Off
Low Pressure Lockout
Flash Code 3
Fast Flash Reset Configure Mode
Lockout Active
Flash Code 4
Low Air Coil Limit Lockout - FP2
Flash Code 2
Dehumidification Mode
Low Water Coil Limit Lockout - FP1 Flash Code 5
Flash Code 3
Reserved
Reserved
Flash Code 6
Flash Code 4
Reserved
Flash Code 7
Flash Code 5
Condensate Overflow Lockout
Load Shed
Over/Under Voltage Shutdown
Flash Code 8
Flash Code 6
ESD
Flash Code 9
Flash Code 7
Reserved
Reserved
Flash Code 10
Reserved
Air/Water Coil Limit Sensor Error
Flash Code 11
Slow Flash
Fast Flash
Flash Code
Thermistor
T
3
Aurora Timing Events
Test Mode
Normal Mode
Event
5 to 80 seconds
1 second
Random Start Delay
5 seconds
< 1 second
Compressor On Delay
2 minutes
5 seconds
Compressor Minimum On Time
4 minutes
15 seconds
Compressor Short Cycle Delay
30 seconds
2 seconds
Blower Off Delay
Less than 1 second Less than 1 second
Fault Recognition Delay – High Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Pressure
30 seconds
30 seconds
Fault Recognition Delay – Low Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Condensate Overflow
2 seconds
2 seconds
Thermostat Call Recognition Time
5 minutes
20 seconds
Auxiliary Heat Staging Delay
2 minutes
7.5 seconds
Emergency Heat Staging Delay
90 seconds
90 seconds
Water Valve Slow Open Delay
30 seconds
30 seconds
Reheat Delay
R
Brown (23)
Green
Accessory Relay
Operation
SW2-4 SW2-5
On
On
Cycle with Blower
Off
Off
Cycle with Compressor
Off
On
Water Valve Slow Open
Off
On
Outdoor Air Damper
C
On
1
2
3
4
5
6
7
8
SW2
Off
1 - Optional, factory installed unit mounted disconnect.
2 - Optional, factory installed internal isolation valve.
3 - Optional, factory installed phase guard.
4 - Optional, factory installed phase guard. The yellow transformer wire shall
be connected directly to the CPU board, if this option is not installed.
5 - Refer to the 5-Speed ECM Low Voltage Connection Table.
6 - Wire is provided with the unit but not connected to the 5-Speed ECM.
Polarized connector
Ground
G
Light Emitting Diode - Green
Capacitor
Y
Light Emitting Diode - Yellow
Fuse
R
Light Emitting Diode - Red
Relay Contacts – N.O., N.C.
CC – Compressor Contactor
CO – Condensate Overflow Sensor
ES – Emergency Shutdown
HP – High Pressure Switch
LP – Low Pressure Switch
FD – Freeze Detection Sensor
F1 – Fuse
SW1 – Push button
SW2 – DIP package 8 position
RB – Blower Relay
RV – Reversing Valve Coil
PGM – Phase Guard Monitor
RH – Reheat Valve Coil
97P819-07
3/8/12
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
46
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Wiring Schematics cont.
Aurora Control with UPC
To ABC - P8
12345678
Orange
Blue
Red
Green
White
Brown
Black
Yellow
BACnet or N2
Network
Connections
COM
NET-
NET+
COM
Optional LON
Add-On Module
NET-
NET+
Devices Must Be Wired in
Daisy Chain Configuration
POWER
LON OC
GND
NET+
24 VAC
NETLON Network
Connections
LED3
POWER
NET+
LED2
RX
FORMAT BATT
N/C
LON
ADAPTER
A
PORT
N/C
Signal
ECHELON
1
Tx
LED3
Rx
LED4
LED6
TX
LED7
RX
2W
4W
1
2
GND
RNET+
RNET
ZS Sensor 1
Addr: 0
ZS Sensor 2
Addr: 1
ZS Sensor 3
Addr: 2
LED4
GND
LN+
LN+12
/S
RNET+12V
2
LED5
ERR
901
8
2
3
7
654
MAC Address Setting
901
8
2
3
7
654
GND
RNET+
RNET+12V
GND
RNET+
RNET+12V
GND
RNET+
RNET+12V
Notes
1. Use DIP Switches 5 – 8 to change
communication protocol and DIP switches 1 – 2
to change BACnet baud rate
Zone Sensors can be wired in daisy chain as show or in a star or
hybrid configuration. Maximum of 5 sensors per UPC. Maximum
allowable load 210mA. See the UPC install manual for possible
sensor combinations.
ON
1 2 34
1
2
4
8
TEN’S
RUN
ONE’S
LOCAL ACCESS
ZS Sensor Information
DIP
Switch
Value
NOTE 1
ON
Net
1
Communication
Options
1 2 3 4 5 6 7 8
LED1
LED2
2
LED1
TX
NET-
Service
Devices Must
Be Wired in
Daisy Chain
Configuration
COM
Each ZS sensor must have a unique address, but
the addresses do not need to be sequential. Use
the DIP switches on the back of the ZS sensor to
set an address from 0 to 4. (0 is the factory
default.) Each DIP switch has the value shown in
the figure to the left. Turn on as many DIP
switches as you need so that their total value
equals the address.
Legend
Factory Low Voltage Wiring
Field Low Voltage Wiring
12345678
RJ45 Connector
Page 1
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
47
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Engineering Guide Specifications
General
Furnish and install WaterFurnace Water Source Heat Pumps
as indicated on the plans. Equipment shall be completely
assembled, piped and internally wired. Capacities
and characteristics as listed in the schedule and the
specifications that follow. The reverse cycle heating/cooling
units shall be either suspended type with horizontal air inlet
and discharge or floor mounted type with horizontal air
inlet and vertical upflow air discharge. Units shall be AHRI/
ISO 13256-1 certified and listed by a nationally recognized
safety-testing laboratory or agency, such as ETL Testing
Laboratory. Each unit shall be computer run-tested at the
factory with conditioned water and operation verified to
catalog data. Each unit shall be mounted on a pallet and
shipped in a corrugated box or stretch-wrapped. The
units shall be designed to operate with entering liquid
temperature between 20°F and 120°F [-6.7°C and 48.9°C].
Option: AlpinePure MERV 13 Filter - A 2 in. thick [51 mm]
MERV 13 filter can help fulfill a credit under the LEED Rating
System. Its low initial resistance promotes low energy
consumption (0.21 in. w.g. @ 300 fpm) and provides nearly
twice the life of a standard filter (300 fpm vs. standard 500
fpm application).
Option: A Super Quiet Sound package shall include multidensity full coverage compressor blanket.
Option: An internally mounted low pressure drop (high Cv)
water solenoid valve shall be factory installed for use in
variable speed pumping applications.
Option: An internally mounted automatic flow regulator
shall be set to 3 gpm/ton to deliver optimal flow to the unit.
Refrigerant Circuit
Casing and Cabinet
The cabinet shall be fabricated from heavy-gauge galvanized
steel and finished with optional corrosion-resistant powder
coating. This corrosion protection system shall meet the
stringent 1000 hour salt spray test per ASTM B117. The
interior shall be insulated with 1/2 in. thick, multi-density,
cleanable aluminum foil coated glass fiber with edges sealed
or tucked under flanges to prevent the introduction of glass
fibers into the discharge air. Standard cabinet panel insulation
must meet NFPA 90A requirements, air erosion and mold
growth limits of UL-181, stringent fungal resistance test per
ASTM-C1071 and ASTM G21, and shall meet zero level bacteria
growth per ASTM G22. Unit insulation must meet these
stringent requirements or unit(s) will not be accepted.
One (horizontal) to two (vertical) blower and two
compressor compartment access panels shall be ‘lift-out’
removable with supply and return ductwork in place.
A duct collar shall be provided on the supply air opening.
Standard size 1 in. [2.54 cm] MERV 4 filters shall be provided
with each unit. Units shall have a return air filter rack that
is field convertible from 1 in. [2.54 cm] to 2 in. [5.1 cm]. The
upflow vertical units shall have a removable insulated divider
panel between the air handling section and the compressor
section to minimize the transmission of compressor noise
and to permit operational service testing without air bypass.
Vertical units shall be supplied with left or right horizontal air
inlet and top vertical air discharge. Horizontal units shall be
supplied with left or right air inlet and side or end air discharge.
The compressor shall be double isolation mounted using
selected durometer grommets to provide vibration free
compressor mounting. The compressor mounting bracket
shall be acoustically deadened galvanized steel to prevent
vibration transmission to the cabinet.
All units shall utilize the non-ozone depleting and low global
warming potential refrigerant R-410A. All units shall contain
a sealed refrigerant circuit including a hermetic motorcompressor, bidirectional thermostatic expansion valve,
finned tube air-to-refrigerant heat exchanger, reversing
valve, coaxial tube water-to-refrigerant heat exchanger,
optional hot water generator coil, and service ports.
Compressors shall be high-efficiency single speed rotary or
scroll type designed for heat pump duty and mounted on
vibration isolators. The compressor shall be double isolation
mounted using selected durometer grommets to provide
vibration free compressor mounting. Compressor motors
shall be single-phase PSC with overload protection.
Option: AlumiSeal electro-coated air coil.
The coaxial water-to-refrigerant heat exchanger shall be
designed for low water pressure drop and constructed of
a convoluted copper (cupronickel option) inner tube and
a steel outer tube. Refrigerant to air heat exchangers shall
utilize enhanced corrugated lanced aluminum fins and
rifled aluminum tube construction rated to withstand 600
psig (4135 kPa) refrigerant working pressure. Refrigerant
to water heat exchangers shall be of copper inner water
tube and steel refrigerant outer tube design, rated to
withstand 600 psig (4135 kPa) working refrigerant
pressure and 450 psig (3101 kPa) working water pressure.
The thermostatic expansion valve shall provide proper
superheat over the entire liquid temperature range with
minimal “hunting.” The valve shall operate bidirectionally
without the use of check valves.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
48
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Engineering Guide Specifications cont.
Option: Cupronickel refrigerant to water heat exchanger
shall be of copper-nickel inner water tube and steel
refrigerant outer tube design, rated to withstand 600 psig
(4135 kPa) working refrigerant pressure and 450 psig (3101
kPa) working water pressure. Water lines shall also be of
cupronickel construction.
Option: Hot water generator - Internal double wall
vented hot water generator coil refrigerant to water heat
exchangers shall be of copper inner water tube and steel
refrigerant outer tube design, rated to withstand 600 psig
(4135 kPa) working refrigerant pressure and 450 psig (3101
kPa) working water pressure.
Option: ThermaShield coated water-to-refrigerant heat
exchanger, water lines and refrigerant suction lines
shall be insulated to prevent condensation at low liquid
temperatures below 50°F.
Option: AlpinePure hot gas bypass
Optional AlpinePure hot gas reheat
Blower Motor and Assembly
The blower shall be a direct drive centrifugal type with a
dynamically balanced wheel. The housing and wheel shall
be designed for quiet low outlet velocity operation. The
blower housing shall be removable from the unit without
disconnecting the supply air ductwork for servicing of the
blower motor. The blower motor shall be isolated from the
housing by rubber grommets. The motor shall be permanently
lubricated and have thermostatic overload protection.
Option: PSC blower motor shall be a three-speed PSC type.
Option: 5-speed ECM blower motor shall be a 5-speed ECM
type. The 5-speed ECM blower motor shall be soft starting,
shall maintain constant torque over its operating static
range, and shall provide 5 speed settings. The blower motor
shall be isolated from the housing by rubber grommets.
The motor shall be permanently lubricated and have
thermostatic overload protection. 5-speed ECM motors shall
be long-life ball bearing type.
Option: Variable speed ECM blower motor shall be a
variable speed ECM type. The variable speed ECM blower
motor shall be soft starting, shall maintain constant cfm
over its operating static range, and shall provide 12 cfm
settings. Variable speed ECM motors shall be long-life ball
bearing type.
Option: High static blower motors shall be available on
certain PSC and variable speed ECM models.
Electrical
A control box shall be located within the unit compressor
compartment and shall contain a 50VA or 75VA transformer,
24 volt activated, 2 pole compressor contactor, terminal
block for thermostat wiring and solid-state controller for
complete unit operation. Electromechanical operation WILL
NOT be accepted. Units shall be name-plated for use with
time delay fuses or HACR circuit breakers. Unit controls shall
be 24 volt and provide heating or cooling as required by the
remote thermostat/sensor.
An Aurora microprocessor-based controller that interfaces
with a multi-stage electronic thermostat to monitor and
control unit operation shall be provided. The control shall
provide operational sequencing, blower speed control,
high and low pressure switch monitoring, freeze detection,
condensate overflow sensing, lockout mode control, LED
status and fault indicators, fault memory, field selectable
options and accessory output. The control shall provide fault
retry three times before locking out to limit nuisance trips.
A detachable terminal block with screw terminals will
be provided for field control wiring. All units shall have
knockouts for entrance of low and line voltage wiring. The
blower motor and control box shall be harness plug wired
for easy removal.
Option: An Aurora Unitary Protocol Converter (UPC) shall
be included that communicates directly with the Aurora
Heat Pump Controls and allows access/control of a variety
of internal Aurora heat pump operations such as sensors,
relay operation, faults and other information. In turn, the
UPC shall convert the internal Aurora Modbus protocol to
BACnet MS/TP, or N2 protocols for communication over a
BAS system. Additional individual unit configuration items
such as ECM fan speeds or freeze protection settings shall
be directly available over the BAS without the need for
access to the actual heat pump.
Option: Aurora UPC DDC communication protocols:
LonWorks
Optional IntelliStartTM (compressor soft starter) shall be
factory installed for use in applications that require low
starting amps, reduced compressor start-up noise, off-grid,
and improved start-up behavior.
Piping
Supply and return water connections shall be FPT copper
fittings fixed to the corner post, which eliminate the need
for backup pipe wrenches.
With vertical units, the condensate connection shall be a 3/4
in. [19.1 mm] PVC socket with internally-trapped hose that
can be routed to front or side corner post locations.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
49
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Engineering Guide Specifications cont.
Hanger Kit
(included with horizontal units only - field installed)
The hanger kit shall consist of galvanized steel brackets,
bolts, lock washers, and isolators and shall be designed to
fasten to the unit bottom panel for suspension from 3/8
in. threaded rods. Unit sizes 009-070 shall include four
brackets. Brackets shall not inhibit filter removal in any way.
Accessories
Thermostat (field-installed)
A multi-stage auto-changeover electronic digital thermostat
shall be provided. The thermostat shall offer two heating
stages and one cooling stage with precise temperature
control. An OFF-HEAT-AUTO-COOL-EMERG system switch,
OFF-AUTO blower switch, and indicating LEDs shall be
provided. The thermostat shall display in °F or °C.
Hose Kits – Ball Valves (field-installed)
A flexible steel braid hose featuring Kevlar® reinforced
EPDM core with ANSI 302/304 stainless steel outer braid
and fire rated materials per ASTM E 84-00 (NFPA 255,
ANSI/UL 723 & UBC 8-1). Ball valve at one end; swivel
connector with adapter at the other end (swivel to adapter
connection via fiber or EPDM gasket). Swivel connection
provides union between heat pump and piping system. The
hoses feature brass fittings, stainless steel ferrules. A full
port ball valve shall be provided with integral P/T (pressure/
temperature) port on supply hose.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C].
• Max. working pressure of 400 psi [2757 kPa] for 1/2 in.
and 3/4 in. hose kits; max. working pressure of 350 psi
[kPa] for 1 in. and 1-1/4 in. hose kits.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C]
• Max. working pressure of 400 psi [2757 kPa] for 1/2 in.
and 3/4 in. hose kits; max. working pressure of 350 psi
[2413 kPa] for 1 in. and 1-1/4 in. hose kits
• Minimum burst pressure of four times working pressure
Hose Kits – Automatic Balancing and Ball Valves with ‘Y’
strainer (field-installed)
A flexible steel braid hose featuring Kevlar® reinforced
EPDM core with ANSI 302/304 stainless steel outer braid
and fire rated materials per ASTM E 84-00 (NFPA 255,
ANSI/UL 723 & UBC 8-1). Ball valve at one end; swivel
connector with adapter at the other end (swivel to adapter
connection via fiber or EPDM gasket). Swivel connection
provides union between heat pump and piping system.
The hoses feature brass fittings, stainless steel ferrules. A
“y” strainer is provided on one end for fluid straining and
integral “blowdown” valve. A full port ball valve shall be
provided with integral P/T (pressure/temperature) port on
supply hose and automatic balancing valve with integral P/T
ports and full port ball valve on return hose.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C]
• Max. working pressure of 400 psi [2756 kPa] for 1/2 in.
and 3/4 in. hose kits; max. working pressure of 350 psi
[2413 kPa] for 1 in. and 1-1/4 in. hose kits
• Minimum burst pressure of four times working pressure
Hot Water Pump Kit
An accessory pump kit is available for hot water generation
option. This kit includes hot water pump, fittings, and water
heater kit necessary for potable water application. Order
DPK5 for use with Aurora and FX10 controls.
Hose Kits – Automatic Balancing and Ball Valves
(field-installed)
A flexible steel braid hose featuring Kevlar® reinforced EPDM
core with ANSI 302/304 stainless steel outer braid and fire
rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL
723 & UBC 8-1). Ball valve at one end; swivel connector with
adapter at the other end (swivel to adapter connection via
fiber or EPDM gasket). Swivel connection provides union
between heat pump and piping system. The hoses feature
brass fittings, stainless steel ferrules. A full port ball valve
shall be provided with integral P/T (pressure/temperature)
port on supply hose and automatic balancing valve with
integral P/T ports and full port ball valve on return hose.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
50
Page _____ of _____
Contractor:
Versatec Ultra Commercial Series
0.75-6 Tons 60Hz
P.O.:
Engineer:
Project Name:
Unit Tag:
Revision Guide
Pages:
Date:
By:
Updated Nomenclature, Added Waterside Economizer Option, Updated ETL Logo,
Updated Pressure Drop Data
18 May 2015
MA
All
Updated with New Aurora UPC DDC Controls
20 May 2014
DS
All
Updated With Aluminum Air Coils
28 Oct 2013
DS
7-8
Updated 009-012 Horizontal Dimensions
28 Oct 2013
DS
11-13
Updated Compressor LRA with IntelliStart
31 Jul 2013
DS
All
Updated Nomenclature to Reflect New Variable Speed ECM Motor
13 Feb 2013
DS
All
Added 3-Phase IntelliStart Availability
13 Feb 2013
DS
All
Upgraded to Aurora 2.0 Controls
13 Feb 2013
DS
51
Added Revision Guide
13 Feb 2013
DS
2, 20
Description:
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1200AUB
07/15
51
Page _____ of _____

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project