null null

LINEAR
POSITION
SENSORS
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.us
www.barr-thorp.com
YOUR AUTOMATION SOLUTIONS PROVIDER
PROXIMITY SENSORS
CORDSETS
DISTRIBUTED I/O
MEASUREMENT
TURCK’s global support network consists of over 2,500 employees in
25 countries and 60 exclusive agencies worldwide that strive to meet
customer expectations. Our sales, support and manufacturing facilities
are strategically located across the world allowing us to respond to
local market conditions and deliver customer specific solutions on a
timely basis.
RFID
We are a world leader in automation technology with a diverse and
broad product portfolio that provides customer specific applications
with high performance, reliable and cost effective solutions. The
synergy in our product portfolio and customization flexibility are key
components of our value proposition.
INTERFACE MODULES
CUSTOM CONNECTIVITY
Our expertise spans across two major industry categories:
Industrial Automation and Process Automation. Each weighs in with
its own unique requirements and methods of conducting business.
This market centric approach ensures that we develop application
specific solutions across a variety of vertical market segments.
POSITION
NETWORK MEDIA
www.turck.us
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Q-track™ LINEAR POSITION SENSORS
Introduction
2
Q-track Linear Position Sensors
S-series with standard resolution, analog output (U/I)
4
E-series with enhanced resolution and SSI interface
6
E-series with enhanced resolution and with programmable
analog/digital output (U/I, PNP), IO-Link compatible
8
Accessories
www.turck.us •
1-800-544-7769 •
Fieldbus connection
10
Connectivity
11
Position elements
12
Mounting hardware
13
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
1
Q-track™ LINEAR POSITION SENSORS
BREAKING NEW GROUND
Principle of operation
TURCK’s new Q-track linear position sensor operation is based
on the RLC (Resistance Inductive Capacitance) principle and
incorporates an advanced microprocessor and precisely
positioned emitter and receiver coils on a printed circuit board.
The emitter coils are excited with a high frequency AC field.
The interaction between the moving position element and the
receiver coils creates different voltages that are induced into
the receiver coils which determines the position of the target.
Speed and accuracy
To increase speed and accuracy, TURCK designed the linear
position sensor with two different coil systems. The first coil
system is for coarse measurements, while the second coil
system is used to determine the fine position. An advanced
microprocessor circuit analyzes the resulting signals producing a
measuring system with very high linearity and repeatability.
The Q-track linear position sensor is available in 100 mm
increments from 100 mm to 1,000 mm in length. Depending
upon the series selected, the sensor is available with 12, 16 or 20
bit accuracy.
Short blind zones
TURCK designed the microprocessor board and coil system to
be compact. The sensor length is only 58 mm longer than the
measuring span. The blind zones measure a mere 29 mm on
each end of the sensor. The layout of the coils is designed in
such a way to minimize the effect of vertical (up to 4 mm) or
lateral misalignment.
Analog or digital outputs
The standard resolution versions feature 0-10 V and 4-20 mA
analog signals with 12 bit resolution, plus the flexibility of
scaling or reversing the direction of operation.
The enhanced resolution versions are available in either
20 bit SSI (Synchronous Serial Interface) or 16 bit I/O Link or
with configurable switching points.
A dual multifunctional Green / Yellow LED facilitates
simple set up and diagnostics.
2
B1158
www.turck.us •
1-800-544-7769
•
Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
• TURCK Inc. Minneapolis, MN 55441
www.barr-thorp.com
High noise immunity
The RLC circuit used in the Q-track™ linear position sensor is
highly immune to noise interference. All products meet
IEC 60529 and EN 60529 standards for noise immunity.
The Q-track linear position sensor is inherently weld
field immune.
Robust housing
The linear position sensors have an anodized cast aluminum
housing. Its electronics are mounted securely inside a
polycarbonate sleeve that provides an IP67 rated housing with
shock ratings up to 30g’s (11 ms) and vibration resistance up to
55 Hz (1 mm displacement).
M12 eurofast® connectors provide an industry standard
connection to the linear position sensor.
Q-track LINEAR POSITION SENSORS
PRECISE, VERSITILE AND RUGGED
The Q-track linear position sensor provides many advantages over
existing linear measurement technologies, such as potentiometer
and magnetostrictive devices. Potentiometer devices are larger
in size relative to the measuring span and are subject to wear and
contamination. Magnetostrictive transducers are also longer in
length relative to the measuring span and require external magnets
that are subject to environmental degradation.
TURCK’s Q-track linear position sensor does not use magnets instead
it uses a tuned coil positioning element. The Q-track RLC technology
provides absolute position feedback and is noise immune. The 25
mm low profile housing is made from extruded materials and is IP67
rated for environmental protection. As a result, the linear position
sensor may be used in a wide variety of industries and applications
that require linear feedback.
www.turck.us •
1-800-544-7769 •
■ Cylinder position
■ Pitch control
■ Stamping
■ Casting machines
■ Pinch roll height
■ Weld nut height
■ Ride control
■ Metal cutting machinery
■ Level control
■ Wood cutting machinery
■ Flight simulators
■ Plastic molding machines
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
3
Q-track™ linear position sensors
S-series with standard resolution, analog output (U/I)
Product features
Measuring range
indicated via LED
■ 12 bit resolution
■ Current and voltage output in one
■
■
■
■
■
■
■
device (5-wire, 15-30 VDC)
M12 eurofast® connector (5-pin)
29 mm blind zones
Programmable measuring range
Captive and floating (0-4 mm from
sensing face) position elements available
Robust extruded aluminum housing
Watertight (IP67) polycarbonate insert
Multifunction LED
■
■
■
■
Setting the measuring range
The initial and final value of the measuring
range is set at the push of a button, either
via a teach adapter or programming line
(pin 5). Furthermore, the output curve can
be inverted.
Green: The positioning element
is in the measuring range.
Green/yellow alternate flashing:
The positioning element is in the
measuring range with a lower signal
quality (i.e. distance too long).
Yellow flashing: The positioning
element is outside of the
measuring range (max. range).
Off: The positioning element
is outside the programmed
range but inside the total, nonprogrammed measuring length.
■ Factory setting (0 V/4 mA at the connector
end): Jumper pin 5 and pin 1 for 10 sec.
■ Factory setting inverted:
Jumper pin 5 and pin 3 for 10 sec.
■ Setting the initial value:
■
Move positioning element to
desired position and jumper
pin 5 and pin 3 for 2 sec.
Setting the final value:
Move positioning element to
desired position and jumper
pin 5 and pin 1 for 2 sec.
Part number key
Li 100 P1
–
Q25L M1 –
LiU5 X3
– H1151
Connection type
Functional principle
H1151 = M12 eurofast 5-pin connector
Li = linear inductive position sensors
Measuring range (mm)
from 100 mm to 1,000 mm, in
100 mm increments (100 mm = 3.937 inches)
X3 = Multifunction LEDs
Output configuration
Positioning element (see page 12)
LiU5 = analog output, 4-20 mA / 0-10 V
P0 = no positioning element
P1 = P1-Li-Q25L (captive)
P2 = P2-Li-Q25L (floating)
P3 = P3-Li-Q25L (floating right angle)
Mounting bracket (see page 13)
M0 = no mounting brackets
M1 = M1-Q25L
M2 = M2-Q25L
M4 = M4-Q25L
Housing style
Q25L = rectangular, profile 25 x 35 mm
Ordering information
The Q-track linear position sensors are available
in different lengths from 100 to 1,000 mm, in
increments of 100 mm. The sensors, mounting
accessories and positioning elements are
available individually or as a kit.
Assembly part number:
Li200P1-Q25LM2-LiU5X3-H1151
4
B1158
www.turck.us •
1-800-544-7769
•
Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
• TURCK Inc. Minneapolis, MN 55441
www.barr-thorp.com
S-series with standard resolution, analog output (U/I)
Technical data
Dimensions
Note: Right angle cable direction
Measuring range specifications
Wiring diagram
Measuring ranges (L)
Blind zone (a)
Blind zone (b)
100, 200, 300, 400, 500, 600, 700, 800, 900, 1,000 mm
29 mm
29 mm
5-pin M12 eurofast® connection
System
Resolution
Repeatability/accuracy
Linearity deviation
Temperature drift
Ambient temperature
Output update rate
Speed
12 bit (measuring range in mm / 4096)
0.025 % (0.025 mm per 100 mm)
≤ 0.1 % of full scale
≤ ± 0.002 %/K
-25 to + 70 °C
2 ms
25 m/s
Mating cordset: RK 4.5T-*/S618
Electrical data
Operating voltage
Residual ripple
No-load current
Rated insulation voltage
Short-circuit protection
Wire breakage / reverse polarity protection
Output function
Voltage output
Current output
Load resistance of voltage output
Load resistance of current output
15-30 VDC
≤ 10 % UPP
≤ 8 mA
≤ 0.5 kV
yes
yes/yes
5-wire, analog output
0-10 V
4-20 mA
≥ 4.7 kΩ
≤ 0.4 kΩ
Housing style
Housing style
Dimensions
Housing material
Material active face
Connection
Vibration resistance
Shock resistance
Protection class (IEC 60529/EN 60529)
rectangular, Q25L
profile 35 x 25 mm, L = measuring range + 58mm
aluminum
plastic, PC-GF20
connector, M12 x 1
55 Hz (1 mm)
30 g (11 ms)
IP67
LEDs
Power indication
Measuring range indication
www.turck.us •
1-800-544-7769 •
green LED
green/yellow multifunctional LED
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
5
Q-track™ linear position sensors
E-series with enhanced resolution and SSI interface
Product features
■ Enhanced resolution, up to 20 bit,
■
■
■
■
■
■
■
■
depending on sensor length
Enhanced sample rate, 1 KHz
Excellent temperature stability
and linearity through direct
digital signal transmission
SSI interface
M12 eurofast® connector (8-pin)
29 mm blind zones
Robust extruded aluminum housing
Watertight (IP67) polycarbonate insert
Multifunction LED
Measuring range
indicated via LED
■
■
■
■
High-precision digital SSI output
SSI (synchronous serial interface) is a 4 wire
data communication standard commonly
used in industry to transmit position data
digitally. The conductors in the cable are
shielded twisted pairs that enhance EMI/
RFI protection. In addition to the clock and
data wires, it also has separate power wiring.
Green: The positioning element
is in the measuring range.
Green/yellow alternate flashing:
The positioning element is in the
measuring range with a lower signal
quality (i.e. distance too long).
Yellow flashing: The positioning
element is outside of the
measuring range (max. range).
Off: The positioning element
is outside the programmed
range but inside the total, nonprogrammed measuring length.
Part number key
Li 100 P1
–
Q25L M1 –
E S G 25 X3
–
H1181
Connection type
Functional principle
H1181 = M12 eurofast 8-pin connector
Li = linear inductive position sensors
Measuring range (mm)
X3 = Multifunction LEDs
from 100 mm to 1,000 mm, in
100 mm increments (100 mm = 3.937 inches)
Output configuration
Positioning element (see page 12)
25 = 25 bit processor
P0 = no positioning element
P1 = P1-Li-Q25L (captive)
P2 = P2-Li-Q25L (floating)
P3 = P3-Li-Q25L (floating right angle)
Code
G = gray
B = binary
Interface
Housing style
S = SSI interface
Q25L = rectangular, profile 25 x 35 mm
Resolution
Mounting bracket (see page 13)
E = enhanced resolution
M0 = no mounting brackets
M1 = M1-Q25L
M2 = M2-Q25L
M4 = M4-Q25L
Ordering information
The Q-track linear position sensors are available
in different lengths from 100 to 1,000 mm, in
increments of 100 mm. The sensors, mounting
accessories and positioning elements are
available individually or as a kit.
Assembly part number:
Li100P2-Q25LM1-ESG25X3-H1181
6
B1158
www.turck.us •
1-800-544-7769
•
Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
• TURCK Inc. Minneapolis, MN 55441
www.barr-thorp.com
E-series with enhanced resolution and SSI interface
Technical data
Dimensions
Note: Right angle cable direction
Measuring range specifications
Wiring diagram
Measuring ranges (L)
Blind zone (a)
Blind zone (b)
100, 200, 300, 400, 500, 600, 700, 800, 900, 1,000 mm
29 mm
29 mm
8-pin M12 eurofast® connection
Pinouts
1. GND
2. 24 VDC
3. CLK +
4. CLK 5. DATA +
6. DATA 7. N/C
8. N/C
System
Resolution
Repeatability/accuracy
Linearity deviation
Temperature drift
Ambient temperature
Output update rate
Speed
0.001 mm
10 μm (0.01 mm)
≤ 0.1 % of full scale
≤ ± 0.0001 %/K
-25 to + 70 °C
1 ms
50 m/s
Mating cordset: E-RKC 8T-264-*
Electrical data
Operating voltage
Residual ripple
Rated insulation voltage
Short-circuit protection
Wire breakage / reverse polarity protection
Output function
Current consumption
15-30 VDC
≤ 10 % UPP
≤ 0.5 kV
yes
yes/yes (voltage supply)
8-wire, SSI, 25 bit Gray code
< 100 mA
Housing style
Housing style
Dimensions
Housing material
Material active face
Connection
Vibration resistance
Shock resistance
Protection class (IEC 60529/EN 60529)
rectangular, Q25L
profile 35 x 25mm, L = measuring range + 58mm
aluminum
plastic, PC-GF20
connector, M12 x 1
55 Hz (1 mm)
30 g (11 ms)
IP67
LEDs
Power indication
Measuring range indication
www.turck.us •
1-800-544-7769 •
green LED
green/yellow multifunctional LED
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
7
Q-track™ linear position sensors
E-series with enhanced resolution, IO-Link compatible
Product features
Measuring range
indicated via LED
■ Enhanced resolution of 16 bit
■ Enhanced sample rate 1 kHz
■ Improved linearity
■ Two programmable outputs
■
■
■
■
■
■
(analog output current or
voltage, switching outputs,
PWM) IO-Link compatible
M12 eurofast® connector (5-pin)
29 mm blind zones
Robust extruded aluminum housing
Watertight (IP67) polycarbonate insert
Multifunction LED
■
■
■
Programming and IO-Link
Output functions, measuring ranges and
alarm outputs are set via a teach adapter
or programming line (pin 5). Alternatively,
the sensor can also be operated in IO-Link
mode. For this purpose, connect the sensor
to an IO-Link compatible module. The
established connection is indicated by a
green flashing LED. For more information,
please see the corresponding instruction
manual.
Green: The positioning element
is in the measuring range.
Green/yellow alternate flashing:
The positioning element is in the
measuring range with a lower signal
quality (i.e. distance too long).
Yellow flashing: The positioning
element is outside of the
measuring range (max. range).
Off: The positioning element
is outside the programmed
range but inside the total, nonprogrammed measuring length.
Available for order January 2011.
Part number key
Li 100 P1 –
Q25L M1 –
E LiUPN8 X3
–
H1151
Connection type
Functional principle
H1151 = M12 eurofast 5-pin connector
Li = linear inductive position sensors
Measuring range (mm)
from 100 mm to 1,000 mm, in
100 mm increments (100 mm = 3.937 inches)
X3 = Multifunction LEDs
Output configuration
Positioning element (see page 12)
LiUPN8 = IO-Link compatible analog output, switching output
P0 = no positioning element
P1 = P1-Li-Q25L (captive)
P2 = P2-Li-Q25L (floating)
P3 = P3-Li-Q25L (floating right angle)
Resolution
E = enhanced resolution
Mounting bracket (see page 13)
Housing style
Q25L = rectangular, profile 25 x 35 mm
M0 = no mounting brackets
M1 = M1-Q25L
M2 = M2-Q25L
M4 = M4-Q25L
Ordering information
ormation
The Q-track linear
near position sensors are available
in different lengths
ngths from 100 to 1,000 mm, in
increments off 100 mm. The sensors, mounting
accessories and
nd positioning elements are
available individually
vidually or as a kit.
Assembly part number:
Li300P1-Q25LM1-ELIUPN8X3-H1151
8
B1158
www.turck.us •
1-800-544-7769
•
Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
• TURCK Inc. Minneapolis, MN 55441
www.barr-thorp.com
E-series with enhanced resolution, IO-Link compatible
Technical data
Dimensions
Note: Right angle cable direction
Measuring range specifications
Wiring diagram
Measuring ranges (L)
Blind zone (a)
Blind zone (b)
100, 200, 300, 400, 500, 600, 700, 800, 900, 1,000 mm
29 mm
29 mm
5-pin M12 eurofast® connection
System
Resolution
16 bit (D/A converter and IO-Link)
(measuring range in mm / 65536)
0.0015 % (0.0015 mm per 100 mm)
≤ 0.1 % of full scale
≤ ± 0.001 % / K
-25 to + 70 °C
1 ms
50 m/s
Repeatability/accuracy
Linearity deviation
Temperature drift
Ambient temperature
Output update rate
Speed
Mating cordset: RK 4.5T-*/S618
Electrical data
Operating voltage
Residual ripple
Rated insulation voltage
Short-circuit protection
Wire breakage / reverse polarity protection
Output function
Current consumption
15-30 VDC
≤ 10 % UPP
≤ 0.5 kV
yes
yes/yes (voltage supply)
two programmable outputs (analog output current or
voltage, switching outputs, PWM, …) IO-Link compatible
< 100 mA
Housing style
Housing style
Dimensions
Housing material
Material active face
Connection
Vibration resistance
Shock resistance
Protection class (IEC 60529/EN 60529)
rectangular, Q25L
profile 35 x 25 mm, L = measuring range + 58 mm
aluminum
plastic, PC-GF20
connector, M12 x 1
55 Hz (1 mm)
30 g (11 ms)
IP67
LEDs
Power indication
Measuring range indication
green LED
green/yellow multifunctional LED
Sample configuration - I/O Link Master, piconet®
The following components are required to connect a linear position sensor throughh IO-Link to PROFIBUS®:
1 x I/O-Link Master, piconet®: SDPX-10L4-0001
1 x connection cable:
RK 4.5-2-RS 4.5T
www.turck.us •
1-800-544-7769 •
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
9
Accessories – Fieldbus connection
The Q-track™ linear position sensor with SSI interface is compatible with all fieldbus devices
Part number
Description
Select one
BL20® – Distributed I/O, IP20 rated device
BL20-GW-EN-IP
BL20-GW-DPV1
BL20-GWBR-DNET
BL20-GWBR-CANOPEN
BL20-GW-EN
BL20-PG-EN
BL20-GW-PG-EN
BL20-1SSI
BL20-S4T-SBBS
E-RKC 8T-264-2
Gateway Ethernet/IP™
Gateway PROFIBUS®-DP
Gateway DeviceNet™
Gateway CANopen
Gateway Ethernet Modbus TCP
Gateway Ethernet Modbus TCP, programmable
Gateway Ethernet PROFINET® IO
Communication module
Connection module, tension-spring connection
Connection cable M12, 8-pin, 2 m cable (end open) to
connect Q-track™ linear position sensors with SSI output
to BL20 fieldbus stations.
Select one
BL67® – Distributed I/O, IP67 rated device
BL67-GW-EN-IP
BL67-GW-DPV1
BL67-PG-DP
BL67-GW-DN
BL67-GW-CO
BL67-GW-EN
BL67-PG-EN
BL67-GW-EN-PN
BL67-1SSI
BL67-B-1M12-8
BL67-B-1M23
E-RKC 8T-264-2-RSC 8T
Gateway Ethernet IP
Gateway PROFIBUS-DP
Gateway PROFIBUS-DP, programmable
Gateway DeviceNet
Gateway CANopen
Gateway Ethernet Modbus TCP
Gateway Ethernet Modbus TCP, programmable
Gateway Ethernet PROFINET IO
Communication module
Connection module M12 eurofast®, 8-pin
Connection module M23 multifast®, 12-pin
Connection cable M12 eurofast, 8-pin, 2 m to connect
Q-track linear position sensors with SSI output to BL67
and BL compact fieldbus stations.
Connection cable M12 eurofast, 8-pin, on M23 multifast
12-pin, 1m to connect Q-track linear position sensors with
SSI output to BL67 and piconet fieldbus stations.
E-RKS 8T-264-1-CSWM12/S3085
BL compact – Robust, IP67 rated device
BLCEP-1M12MT-1SSI
Ethernet IP, M12 eurofast, 8-pin
E-RKC 8T-264-2-RSC 8T
Connection cable M12 eurofast, 8-pin, 2 m to connect
Q-track linear position sensors with SSI output to BL67
and BL compact fieldbus stations.
Sample configuration - BL67
The following components are required to connect a Q-track
linear position sensor to a Ethernet IP system via a BL67 station:
1 x Ethernet IP gateway:
1 x communication module:
1 x connection module:
1 x connection cable:
10
B1158
www.turck.us •
BL67-PG-EN-IP
BL67-1SSI
BL67-B-1M12-8
E-RKC 8T-264-2-RSC 8T
1-800-544-7769
•
Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
• TURCK Inc. Minneapolis, MN 55441
www.barr-thorp.com
Connectivity
Part number
Description
Connection cable for standard series and E-series with analog output
RK 4.5T-2/S618
RK 4.5T-2-RS 4.5T
(as shown)
RKC 4.5T-2-RSS 4.5T
M12 eurofast®, 5-pin female, shielded, 2 meter cable with
flying leads. Other lengths available upon request.
M12 eurofast, 5-pin 2 meter extension cable with male and
female connectors. To connect Q-track™ linear position
sensors with analog output to TB4. Other lengths available
upon request.
M12 eurofast, 5-pin 2 meter extension cable with male and
female connectors. To connect Q-track™ linear position
sensors with analog output to TB4. Other lengths available
upon request. Shield connected to male coupling nut for
use in high noise environments.
Connection cable for E-series with SSI interface
E-RKC 8T-264-2
E-RKC 8T-264-2-RSC 8T
E-RKS 8T-264-0.5-CSWM12/S3085
(as shown)
M12 eurofast, 8-pin female connector with
2 meter cable with flying leads.
To connect Q-track linear position sensors with
SSI output to BL20® fieldbus stations.
M12 eurofast, 8-pin female connector with
2 meter cable to M12 eurofast, 8-pin male connector.
To connect Q-track linear position sensors with
SSI output to BL67® and BL compact fieldbus stations.
M12 eurofast, 8-pin female connector with 0.5 meter cable
to right angle M23 multifast®, 12-pin male connector.
To connect Q-track linear position sensors with
SSI output to BL67 and fieldbus stations.
Teach adapter
VB2-SP5
Teach adapter to program the measuring
range of Q-track linear position sensors.
Test box
TB4
www.turck.us •
1-800-544-7769 •
Test box for sensors with analog or switching output;
batteries included.
May also be used to program zero and span.
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
11
Position elements
Dimensions
Part number
Description
P1-Li-Q25L
Captive positioning element;
laterally inserted in sensor groove;
incl. rod-end bearing to mount M5
threaded rods
P2-Li-Q25L
Floating positioning element,
operates at a distance of
0-4 mm to the sensor surface
P3-Li-Q25L
Floating positioning element;
right angle orientation;
operates at a distance of
0-4 mm to the sensor surface
CA*E-Q21
Control arm; Can be used with
P1-Li-Q25L and RE-Q21 to connect
the positioning element to an
actuator.
* Length specified in inches.
3, 6 and 9 inches are standard
lengths. Other lengths available,
consult factory for part numbers
and availability.
12
B1158
www.turck.us •
1-800-544-7769
•
RE-Q21
Rod End; Can be used with
P1-Li-Q25L and CA*E-Q21 to
connect the positioning element
to an actuator.
Fax: (763) 553-0708
• TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Mounting accessories
A comprehensive range of accessories is
available for mounting. Sliding blocks,
the sensor groove and different brackets
provide many mounting possibilities.
Flexibility is guaranteed, as accessories are
available for all borehole distances
Dimensions
Part number
Description
M1-Q25L
Mounting foot for Q-track™
linear position sensors;
Two mounting feet should be used
for devices with a measuring range
of up to 1,000 mm;
Material: stainless steel;
2 pcs. per bag.
M2-Q25L
Mounting foot for Q-track
linear position sensors;
Two mounting feet should be used
for devices with a measuring range
of up to 1,000 mm;
Material: stainless steel;
2 pcs. per bag.
M4-Q25L
Mounting bracket for Q-track linear
position sensors;
Two mounting feet should be used
for devices with a measuring range
of up to 1,000 mm;
Material: stainless steel;
2 pcs. per bag.
MN-M4-Q25
Sliding blocks with M4 thread for
back side groove of Q-track
linear position sensors;
Material: Brass;
10 pcs. per bag.
Only available separately, not as a
kit with linear position sensors.
www.turck.us •
1-800-544-7769 •
B1158
Fax: (763) 553-0708 • TURCK Inc. Minneapolis, MN 55441
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
13
USA
www.turck.com
TURCK Inc.
3000 Campus Drive
Minneapolis, MN 55441
Phone: (763) 553-7300
Fax:
(763) 553-0708
Application Support:
1-800-544-7769
E-mail: [email protected]
www.turck.us
MEXICO
TURCK MEXICO S. DE R.L. DE C.V.
Carr. Saltillo-Zacatecas km 4.5 s/n
Parque Industrial “La Angostura”
Saltillo, COAH. C.P. 25070
Mexico
Phone: +52 (844) 411-6650/46
Fax:
+52 (844) 482-6926
Local Toll Free: 01-800-01-88725
E-mail: [email protected]
CANADA
Chartwell Automation Inc.
140 Duffield Drive
Markham, Ontario
Canada, L6G 1B5
Phone: (905) 513-7100
Fax:
(905) 513-7101
Toll Free: 1-877-513-7769
AUSTRALIA
TURCK Australia Pty. Ltd.
Unit 5, 6-7 Gilda Court
Mulgrave, Victoria 3170
Australia
Phone: (+61) 3 9560 9066
Fax:
(+61) 3 9560 1620
Local Toll Free: 1300 132566
E-mail: [email protected]
GERMANY
WORLD HEADQUARTERS
Hans TURCK GmbH & Co. KG
Witzlebenstrasse 7
D-45472 Muelheim an der Ruhr
Federal Republic of Germany
Phone: (+49) 208-49 52-0
Fax:
(+49) 208-49 52 264
Printed in USA
©2010 by TURCK Inc. All rights reserved. No part of the
publication may be reproduced without written permission.
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
B1158
10/10

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project