Datasheet [PDF:167.4KB]
UFM Series
Analog to Digital Converter
UFM-100ADC
The UFM-100ADC is a module-type A/D converter that can be
installed in a UFM frame. Analog composite, Y/C, and analog
component input can be converted to SD SDI for output.
Features
n Includes analog composite, Y/C, and analog component input.
n Two SD SDI outputs
n 10-bit A/D
n Adjustment of luminance level, chroma level, and chroma phase.
n Reference signals can be input from a UFM frame or rear module.
Block Diagram
Analog Composite
SD SDI 1
Y/C
SD SDI 2
Analog Component
COMPOSITE
/Y/Y IN
C/B-Y IN
-/-/R-Y IN
PROC
FUNCTION
Luminance Level
Chroma Level
Chroma Phase
9-bit
Analog to Digital
SD SDI OUT 1
UFM-100ADC
GENLOCK IN
Analog
to Digital
Converter
SD SDI OUT 2
Composite
1 in
Y/C
1 in
Component
1 in
SD SDI
2 out
UFM-100ADC Specifications
l Standard
l Video Input
Analog Composite
Y/C
Analog Component
l Genlock Input*
l Video Output
Digital Component
l Quantization
l Sampling Frequency
l I/O Delay
l Frequency Response
NTSC (525/60), PAL (625/50) (Auto detect)
Selectable as below
1.0Vp-p, 75Ω, 1ea., BNC
Y: 1.0Vp-p, C: 0.286Vp-p (NTSC) / 0.3Vp-p (PAL), 75Ω, 1ea., BNC
Y: 1.0Vp-p, R-Y/B-Y: 0.7Vp-p, 75Ω, 1ea., BNC (Selectable as Betacam level or SMPTE/EBU level)
BB: 0.429Vp-p (NTSC) / 0.45Vp-p (PAL), 75Ω, 1ea, BNC (Also signal input from UFM Frame)
270Mbps, 75Ω, 2ea., BNC
10-bit
Y: 13.5MHz, C: 6.75MHz
Max. 1 frame
100kHz - 5MHz: ±0.3dB, roll off above 5MHz (NTSC)
100kHz - 5.5MHz: ±0.3dB, roll off above 5.5MHz (PAL)
Over 54dB
1.5%
1%
u Video Level: -50% - +50% u Chroma Level: -50% - +50% u Chroma Phase: -30º - +30º
10ºC - 40ºC / 30% - 90% (no condensation)
Supply from UF Frame, +12VDC - +24VDC / Approx. 3.6W / +12VDC: 0.3A, +24VDC: Approx. 0.15A
106 (W) x 303 (D) mm (Front board), 18.5 (W) x 66.1 (D) mm (Rear board) / Approx. 0.5kg
1 slot
Operation manual
l S/N Ratio
l Linearity
l K-Factor (2T pulse)
l Process Control
l Temperature / Humidity
l Power / Consumption / Draw
l Dimensions / Weight
l Require Slot
l Accessories
*Can not adjust Genlock phase.
*Can not operate minimum delay and fixed delay mode.
UFM-100ADC Rear View
C
COMPST/Y
Y
IN
B-Y
1
R-Y
2
SD-SDI OUT
GENLOCK IN
UFM-100ADC
Universal Frame Line-up
UF-106A
UF-112
Universal frame that can install up to 6 UFM modules,
provides redundancy and universality, and contributes to
reduced system space
Universal frame that can install up to 12 UFM modules,
provides redundancy and universality, and supports remote monitoring with installation of control board
FOR-A COMPANY LIMITED
Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan
FOR-A America Corporate Office : 11125 Knott Ave., Suite #A, Cypress, CA 90630, U.S.A.
FOR-A America East Coast Office : 1065 Avenue of the Americas Suite #1701A New York,NY 10018, U.S.A.
FOR-A America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, U.S.A.
FOR-A Corporation of Canada : 425 Queen St. W. #211, Toronto, Ontario M5V 2A5, CANADA
FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, U.K.
FOR-A Italia S.r.l. : Viale Europa 50 20093, Cologno Monzese (MI), Milan, ITALY
FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-Dong, Youngdeungpo-Gu, Seoul 150-800, Korea
Homepage:http://www.for-a.com/
+81 (0)3-3446-3936
+1 714-894-3311
+1 212-861-2758
+1 352-371-1505
+1 416-977-0343
+44 (0)20-8391-7979
+39 02-254-3635/6
+82 (0)2-2637-0761
Fax : +81 (0)3-3446-1470
Fax : +1 714-894-5399
Fax : +1 212-861-2793
Fax : +1 352-378-5320
Fax : +1 416-977-0657
Fax : +44 (0)20-8391-7978
Fax : +39 02-254-0477
Fax : +82 (0)2-2637-0760
© 2006 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company, Ltd. Design and specifications subject to change without notice. Printed in Japan. 0603KM1A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement