AVS.4.13.14020/CC-06 Issuing Center: ANTWERP Page 1/2 VERITAS CERTIFICATE OF CONFORMITY To ICAO Annex 14 - Fifth Edition - July 2009 (Standards and recommended practices) To FAA Advisory Circular 150/5345-46 To Technical Specification IEC 61827 AENA specification PPT 018-01/08 The undersigned, Dirk Van der Eecken, acting within the scope of the General Conditions of BUREAU VERITAS, certifies herewith the supply of FTS/C-X-XXX Product: Manufactured by ADB bvba in Belgium Application: Taxiway Centreline and Stop Bar Inset Light - was found in conformity with: • the catalogue sheet A.03.431 • the ICAO - Annex 14 - Volume I - §5.3.16; 5.3.18; 5.3.19; 5.3.20; 5.3.21 for light output • the FAA AC 150/5345-46 requirements for L-852 Inset Lights • The IEC TS 61827 • The AENA Specification PPT 018-01/08 - Date of inspection: April 30th , 2013. - and has been, upon request of: ADB Leuvensesteenweg, 585 B -1930 ZAVENTEM - BELGIUM - inspected in conformity with the applicable requirements of • the catalogue sheets A.03.431 • the ICAO - Annex 14 - Volume I • the FAA AC 150/5345-46 requirements for L-852 • The AENA Specification PPT 018-01/08 & the IEC TS 61827 Issued at Antwerp, April 30 th , 2013 Particulars of inspection: detailed hereafter Mr Rudi Vandenbempt Inspector Industry BUREAU VERITAS ANTWERP 4k~S3 This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicab le requirements occur during this period of validity. AVS.4.13.14020/CC-06 Issuing Center: ANTWERP Page 2/2 VERITAS The following survey operations have been carried out without noticeable remarks: • Attendance to tests at the Laboratory premises of the manufacturer: o Examination of test equipment o Checking of installation of units before testing o Attendance to photometric tests per applicable procedures and method o Attendance to the Colorimetric tests per applicable procedure & method o Attendance to the Static Load test o Attendance to the Surface Temperature test o Attendance to the Gas tightness test • • Statistical test results per IEC 61827 Test results are detailed in the attached test records. Review of Intertek ETL Certificate of Conformance Dated Aug 30, 2006, revised Sep 24, 2009 Applicable Intertek Test reports No: ADB USA LLC. 3096040CRT-001; 3114696CRT-001 CONCLUSION Taking into account the satisfactory results of actual tests and examinations we confirm that the manufacturing and the test results for the above specified units are in conformity with applicable standards, specifications and data sheets. (Details of standards and specifications are indicated on page 1 of this certificate and data sheet as per catalogue). ENCLOSURE Test records of testings which have been attended, duly stamped for identification by BUREAU VERITAS: Photometric test reports: • Results of intensity values inside the beam • Isocandela curves • Colorimetry • Static Load test • Surface temperatura test • Gas tig htness test Issued at Antwerp, April 30th , 2013 Mr Rudi Vandenbempt Inspector Industry BUREAU VERITAS ANlWERP This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur during this period of validity.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project