HITACHI CP X1200W Projector Lamp User Manual

HITACHI CP X1200W Projector Lamp User Manual
Disclaimer
This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.fixyourdlp.com
Video Guides: http://www.fixyourdlp.com/guides
User Forums: http://www.fixyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.fixyourdlp.com/counterfeits
Sponsors:
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsored by DM
00CP-X1200 Basic-QG-再校 03.11.26 8:58 AM ページ2
Projector
ENGLISH
CP-X1200W/CP-X1250W
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALANO
NORSK
NEDERLANDS
PORTUGUÊS
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ1
Projector
CP-X1200W/CP-X1250W
TEMP
LAMP
STANDBY/ON
VIDEO
MENU
BNG
COMPONENT
S-VIDEO
LENS SHIFT
INTER
RGB
M1-D
INPUT
RESET
FOCUS
User ’s Manual – Quick Guide
ZOOM
SEARCH
KEYSTONE
Thank you for purchasing this projector.
WARNING Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
Contents Of Package
1
2
3
4
5
6
7
LASER INDICATOR
TEMP
LAMP
STANDBY/ON
STANDBY/ON VIDEO
RGB
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
RESET
M1-D
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
+
+
LENS SHIFT FOCUS
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
7
NEXT
ENTER
ESC
MENU
POSITION
RESET
AUTO
PinP
VOLUME
FREEZE
MUTE
MAGNFY
ON
6
1
2
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
3
4
5
Projector & Lens Cap
Power cords (UK, US, Europe)
RGB cable
Video/Audio cable
M1-D cable
Remote control
Batteries
(for the remote control)
8 User’s Manuals
Safety Guide
Quick Guide
Operating Guide
8
Arrangement
Refer to this table, in case of 4:3 aspect
ratios. The values a and b shown in the
table are calculated for a full size screen.
Screen
Lens center
b
m
n
Side view
a
40 (1.0)
a [inch (m)]
b [inch (cm)]
Min.
Max. m:n=1:1 m:n=10:0
46(1.2) 71(1.8) 12(30) 24(61)
60 (1.5)
71(1.8) 107(2.7) 18(46)
36(91)
70 (1.8)
83(2.1) 126(3.2) 21(53)
42(107)
Screen Size
[inch (m)]
80 (2.0)
95(2.4) 144(3.7) 24(61)
48(122)
100 (2.5)
120(3.0) 181(4.6) 30(76)
60(152)
120 (3.0)
144(3.7) 217(5.5) 36(91)
72(183)
150 (3.8)
181(4.6) 272(6.9) 45(114) 90(229)
200 (5.1)
243(6.2) 364(9.2) 60(152) 120(305)
250 (6.4)
304(7.7) 455(11.6) 75(191) 150(381)
300 (7.6)
366(9.3) 547(13.9) 90(229) 180(457)
350 (8.9)
427(10.9) 638(16.2) 105(267) 210(533)
400 (10.2)
489(12.4) 730(18.5) 120(305) 240(610)
500 (12.7)
612(15.5) 913(23.2) 150(381) 300(762)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
1
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ2
Connecting Your Devices
WARNING • Install the projector in a suitable environment according to
instructions of the “User’s Manual – Safety Guide”.
Please refer to the following for connecting your devices. See the rear of the projector. You can see
the ports.
Connecting to a computer
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
R-AUDIO IN-L
Computer
Y
V
BNC
VIDEO
S-VIDEO
Projector
A
RGB out
RGB cable
RGB
Audio out
Stereo Mini cable
AUDIO IN 2
F G
E
CONTROL
E A
AUDIO IN2
F
RS-232C port
RS-232C cable
CONTROL
Network port
CAT-5 cable
NETWORK
R/CR/PR
AUDIO OUT
RGB OUT
RGB
G/Y
B/CB/PB
NETWORK
REMOTE CONTROL
AUDIO IN1
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
G
■ If using a M1-D input (to mouse control)
B
DVI port
M1-D
D
B
CONTROL
AUDIO OUT
AUDIO IN2
USB port
M1-D cable
R/CR/PR
NETWORK
REMOTE CONTROL
AUDIO IN1
RGB OUT
RGB
G/Y
B/CB/PB
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
D
Audio out
Stereo Mini cable
AUDIO IN 1
■ If using a BNC input
C
R/CR/PR G/Y B/CB/PB H
RGB out
BNC cable
V
R/CR/PR
G/Y
B/CB/PB
H
V
D
CONTROL
AUDIO OUT
AUDIO IN2
R/CR/PR
NETWORK
REMOTE CONTROL
AUDIO IN1
RGB OUT
RGB
G/Y
C
B/CB/PB
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
D
Audio out
Stereo Mini cable
AUDIO IN 1
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
2
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ3
Connecting to a monitor
CONTROL
L
AUDIO IN1
AUDIO IN2
Monitor
R/CR/PR
G/Y
B/CB/PB
AUDIO OUT
RGB OUT
RGB
Projector
H
CR/PR Ca/Pa
RGB in
RGB cable
Y
V
R-AUDIO IN-L
L
NETWORK
REMOTE CONTROL
VIDEO
S-VIDEO
BNC
RGB OUT
Connecting to a speaker (with amplifier)
CONTROL
Speaker
Projector
RGB
G/Y
M
Audio in
Stereo Mini cable
M
AUDIO OUT
AUDIO IN2
R/CR/PR
NETWORK
REMOTE CONTROL
AUDIO IN1
B/CB/PB
RGB OUT
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
AUDIO OUT
Connecting to a VCR/DVD Player
VCR/DVD Player
Projector
CONTROL
NETWORK
REMOTE CONTROL
AUDIO IN1
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
Video out
R-AUDIO IN
AUDIO IN-L
VIDEO IN
AUDIO OUT
AUDIO IN2
H
I
R/CR/PR
RGB OUT
RGB
G/Y
B/CB/PB
H
CR/PR Ca/Pa
Y
HI
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
■ If using a s-video signal
J
S-video out
S-video cable
S -VIDEO
CONTROL
AUDIO OUT
AUDIO IN2
RGB OUT
RGB
CR/PR Ca/Pa
R-AUDIO IN
AUDIO IN-L
R/CR/PR
G/Y
H
B/CB/PB
H
Y
H
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
NETWORK
REMOTE CONTROL
AUDIO IN1
V
R-AUDIO IN-L
J
VIDEO
S-VIDEO
BNC
■ If using a component signal
COMPONENT
CR/PR out
CB/PB out
Y out
CR/PR
CB/PB
Y
K
CONTROL
REMOTE CONTROL
AUDIO IN1
AUDIO OUT
AUDIO IN2
R/CR/PR
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
R-AUDIO IN
AUDIO IN-L
RGB OUT
RGB
G/Y
B/CB/PB
H
V
K
H
CR/PR Ca/Pa
R-AUDIO IN-L
H
NETWORK
Y
VIDEO
S-VIDEO
BNC
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
3
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ4
Connecting The Power Supply
WARNING • Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –
Safety Guide” and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect the connector of the power cord to
the AC inlet of the projector.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
BNC
2
Firmly plug the power cord’s plug into the
outlet.
S-VIDEO
AC Inlet
Outlet
Connector
Plug
Adjusting The Projector's Elevator
WARNING • Do not touch about the lens and ventilation openings during use or
immediately after use to prevent a burn.
CAUTION • To prevent damaging the projector and injuring yourself, always
hold the projector whenever using the elevator buttons to adjust the elevator feet.
1
Press and hold in the elevator buttons.
Elevator buttons
TEMP
LAMP
STANDBY/ON
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
As necessary, you can also finely adjust the height of
the projector by twisting the elevator feet by hand.
BNG
COMPONENT
S-VIDEO
3
VIDEO
Raise or lower the projector to the desired height and
then release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
LENS SHIFT
2
Elevator feet
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
4
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ5
Preparing Remote Control
WARNING • The laser pointer of the remote control is used in place of a finger or
rod. Never look directly into the laser beam outlet or point the laser beam at other
people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
R
TO
CA
B
DI
R
RG
IN
SE
LA
CAUTION
EO
N
VID
+
Y/O
DB
STAN
+
+
LASER RADIATION
DO NOT STARE INTO BEAM
LENS
SHIFT
K
R
LA
T
NEX
IOUS
PREV
LASER-STRAHLING
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
WAVE LENGTH:640-660nm MAX OUTPUT:1mW
レーザー光
ビームをのぞきこまないこと
クラス2レーザー製品 JIS C 6802(1998)
最大出力:1.0mW 波長:640−660nm
MODEL:H-IRC4
R
TE
EN
U
MEN
TO
AU
C
ET
ES
RES
VO
ON
B
JANUARY,2003
INTERLINK K.K.
1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN
101-0031
MADE IN CHINA
•
CT
AS
BL
Comples with 21 CFR, 1040.10 AND 1040.11
IEO60825-1:1993+A1:1997+A2:2001
•
•
•
–
SE
–
PE
–
AN
WAVE LENGTH: 640-660nm
MAX OUTPUT: 1mW
CLASS 2 LASER PRODUCT
MANUFACTURER:
MANUFACTURED
OM
ZO
S
CU
FO
レーザー光をのぞき込まないこと。
レーザー光を人に向けないこと。
子供に使わせないこと。
製造者:INTERLINK ELECTRONICS
SITI
PO
ME
LU
PinP
FY
GN
MA N
O
TE
MU
ZE
EE
CH
FR
AR
NE
OFF
KE
1
2
JQA
3
GE
AN
ID
PS
C
SE
TO
YS
CH
MADE IN CHINA
CAUTION • About the battery
• Keep a battery away from children and pets.
Use only the battery specified: two AA batteries.
Do not mix new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading the
battery (as indicated in the remote control).
Dispose of batteries in accord with environmental laws.
1
Remove the battery cover.
Slide back and remove the battery cover in the direction of
the arrow.
2
Insert the batteries.
Align and insert the two AA batteries according to their plus
minus terminals (as indicated in the remote control).
3
Close the battery cover.
Replace the battery cover in the direction of the arrow and
snap it back into place.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
5
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ6
Turning ON Power
WARNING • When the power is ON, a stronglight is emitted. Do not look into
the lens or vents of the projector.
1
Remove the lens cap.
2
Set the power switch to [ | ] (ON).
The STANDBY/ON indicator will light to solid orange.
STANDBY/ON
STANDBY/ON button / indicator
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
LASER INDICATOR
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
STANDBY/ON VIDEO
AUDIO OUT
CR/PR Ca/Pa
V
R-AUDIO IN-L
VIDEO
BNC
S-VIDEO
+
+
+
LENS SHIFT FOCUS
–
3
Press the STANDBY/ON button.
The projector lamp will light up and the
STANDBY/ON indicator will begin blinking green.
When the power is completely on, the indicator
will stop blinking and light green.
STANDBY/ON
–
C
S
STANDBY/ON
button
Power switch (ON position)
ZOOM
FOCUS
ZOOM
buttons
FOCUS
buttons
LENS SHIFT
4
5
Turn the INPUT dial.
Turning the dial cycles through the inputs as shown LENS SHIFT
buttons
below. Select the signal you wish to project.
RGB
ZOOM
–
S
Use the LENS SHIFT buttons to shift the
picture upward or downward.
M1-D
RGB
Y
BNC
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
COMPONENT
Y
V
VIDEO
S-VIDEO
INPUT dial
6
Use the ZOOM buttons to adjust the screen size.
M1-D
INPUT
RGB
BNG
7
Use the FOCUS buttons to adjust the focus.
COMPONENT
INTER
S-VIDEO
VIDEO
Turning OFF Power
1
2
Press the STANDBY/ON button.
The message “Power off?” will appear on the
screen for approximately 5 seconds.
Press the STANDBY/ON button again while
“Power off?” the message is visible.
The projector lamp will go off, and the STANDBY/ON
indicator will begin blanking orange.
Then the STANDBY/ON indicator will stop blinking and
light to solid orange when the lamp cooling is complete.
3
Switch the power switch to [O] (OFF).
The STANDBY/ON indicator will go off.
4
Attached the lens cap.
STANDBY/ON
STANDBY/ON button / indicator
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
LASER INDICATOR
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
STANDBY/ON VIDEO
Y
RGB
V
R-AUDIO IN-L
BNC
VIDEO
S-VIDEO
+
+
LENS SHIFT FOCUS
STANDBY/ON
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
STANDBY/ON
button
Power switch (OFF position)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
6
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ7
Control Buttons
4
7 M1-D
RGB
8
LENS SHIFT
BNC
9
COMPONENT
0 S-VIDEO
-VIDEO
=
6
SEARCH
INPUT
1 STANDBY/ON button
and STANDBY/ON indicator
2 TEMP indicator
3 LAMP indicator
4 LENS SHIFT buttons
5 INPUT dial
6 SEARCH button
7 M1-D indicator
8 RGB indicator
9 BNC indicator
0 COMPONENT indicator
- S-VIDEO indicator
= VIDEO indicator
q ZOOM buttons
w FOCUS buttons
e KEYSTONE button
r MENU button
t RESET button
y ENTER button
u Cursor buttons
/ / /
e
KEYSTONE
5
RESET
t
FOCUS
ZOOM
y
ENTER
MENU
u
w q
r
STANDBY/ON
TEMP
LAMP
2 3
TEMP
1
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
RESET
M1-D
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
Control Panel
on the Projector
Remote Control
1 STANDBY/ON button
4 LENS SHIFT buttons
6 SEARCH button
q
w
e
r
t
y
ZOOM buttons
FOCUS buttons
KEYSTONE button
MENU button
RESET button
ENTER button
(
Mouse left button)
y
(Rear)
u Cursor buttons
/ / /
(
Keyboard
Arrow keys / / / )
i
1
q
4
w
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
u
r
s
f
h
j
k
RGB
o
p
[
\
]
i
o
p
[
]
\
a
s
NEXT
a
ENTER
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
e
d
t
g
l
;
6
'
d
f
g
h
j
k
l
;
'
LASER INDICATOR
VIDEO button
RGB button
BLANK button
ASPECT button
LASER button
Cursor buttons
/ / /
(
Mouse move pointer)
ESC button
(
Keyboard ESC key)
(
Mouse right button)
POSITION button
AUTO button
PinP button
MAGNIFY buttons
FREEZE button
VOLUME button
MUTE button
ID CHANGE switch
Remote Control
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
7
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ8
Lamp
WARNING The projector uses a high-pressure mercury glass lamp. The lamp
can break with a loud, or burn out, if jolted or scratched, handled while hot, or worn
over time. Note that each lamp has a different lifetime, and some may burst or burn out
soon after you start using them. In addition, when the bulb bursts, it is possible for
shards of glass to fly into the lamp housing, and for gas containing mercury to escape
from the projector’s vent holes.
• Please carefully read the section “Lamp” of “User’s Manual – Safety Guide”.
• Do not open the lamp cover, if the projector is mounted on the ceiling, or if the lamp
has broken. Ask your dealer to replace the lamp.
• Before replacing the lamp, make sure the power switch is off and the power cable is
not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently.
• Use the lamp of the specified type only. Type number: DT00601 (sold separately)
Replacing The Lamp
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.
1
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes.
2
Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is
mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.
TEMP
STANDBY/O
LAMP
N
VIDEO
S-VIDEO
MENU
INTER
BNG
RGB
RESET
INPUT
M1-D
FOCUS
ZOOM
SEARCH
KEYSTONE
PC
CO LAMP
TEMP
STANDBY/O
LAMP
N
VIDEO
S-VIDEO
COMPONENT
MENU
INTER
LENS
SHIFT
BNG
RGB
M1-D
RESET
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
Unscrew the 3 screws, and slowly pull out the lamp Screws
by the handle. Be careful not to touch the inside of
the lamp case.
COMPONENT
4
Lamp cover
SHIFT
3
Lamp cover
After making sure that the projector has cooled knob
adequately, slide the knob of a lamp cover lock as
shown in the Figure. Then, one side of the lamp
cover is raised. Pull up the lamp cover and remove
it, as shown in the Figure.
LENS
In the case of replacement by yourself,
PC
PC
CO LAMP
P
CO LAM
TEMP
STANDBY/O
LAMP
N
VIDEO
S-VIDEO
COMPONENT
INTER
MENU
BNG
RGB
INPUT
RESET
FOCUS
SEARCH
KEYSTONE
ZOOM
7
Tabs
M1-D
Interlocking the 2 tabs of the lamp cover to the projector,
put the lamp cover on the projector. Then push the point
of the lamp cover to fix it, as shown in the Figure. Make
sure that the lamp cover does’t come up.
SHIFT
6
LENS
5
Insert the new lamp, and tighten the 3 screws firmly
to lock it in place.
PC
CO LAMP
Turn on the projector, and reset the lamp timer. When the lamp has been replaced
after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed,
complete the following operation within 10 minutes of switching power on.
(1) While the projector running, press the MENU button (r) to open the menu.
(2) Choose the “OPTION” on the menu using the
button (u), then press the button (u)
/
or ENTER button (y).
(3) Choose the “LAMP TIME” using the
button (u), then press and hold the RESET button
/
(t) for 3 seconds.
(4) Choose the “RESET” using the
button (u).
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
8
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ9
Air Filter
WARNING • Please carefully read the “User’s Manual - Safety Guide.
• Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in,
then wait at least 45 minutes for the lamp to cool sufficiently.
• Use the air filter of the specified type only. Type number: NJ08081 (sold separately)
• Do not use the projector with the air filter and filter cover removed. The use without the air filter could result
in damage.
CAUTION • If the air filter becomes clogged by dust or the like, internal temperature rises and
could cause malfunction. The power is automatically turned off in order to prevent the projector from
overheating internally.
Caring For The Air Filter
The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to
clean the air filter, clean the air filter as soon as possible. If the air filter becomes clogged by dust or
the like, internal temperature rises and could cause malfunction.
memo When you replace the lamp, please replace also the air filter.
1
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2
After making sure that the projector has cooled adequately, remove the filter cover
and air filter.
3
Apply a vacuum cleaner to the top of the filter cover and
the air filter to clean.
If the soiling will not come off the air filter, or it becomes
damaged, it needs to be replaced.
If the air filter needs to be replaced, contact your dealer
to prepare a new air filter. Tell the dealer your air filter
type.
4
Insert the cleaned air filter or a new air filter, and replace
the filter cover.
5
Turn on the projector power, and reset the filter timer.
(1) While the projector running, press the MENU button (r) to open
the menu.
(2) Choose the “OPTION” on the menu using the
button
/
(u), then press the button (u) or ENTER button (y).
(3) Choose the “FILTER TIME” using the
button (u), then
/
press and hold the RESET button (t) for 3 seconds.
(4) Choose the “RESET” using the
button (u).
memo Incorrectly resetting of the filter timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
Hold the release
buttons of the filter
cover while pulling
down it.
TEMP
LAMP
STANDBY/ON
VIDEO
MENU
BNG
COMPONENT
S-VIDEO
LENS SHIFT
INTER
RGB
RESET
M1-D
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
Hold the release button
of the air filter while
pulling out it.
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
9
01CP-X1200-ENG-QG-五校 03.12.5 9:33 AM ページ10
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
00CP-X1200 Basic1-三校 03.12.5 6:24 PM ページ2
Projector
CP-X1200W/CP-X1250W
ENGLISH
CP-X1200W/CP-X1250W
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
TECHNICAL
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ1
Projector
CP-X1200/CP-X1250
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
SEARCH
KEYSTONE
FOCUS
ZOOM
User's Manual - Operating Guide
Thank you for purchasing this projector.
WARNING Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
1
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ2
Projector Features
This multimedia projector is used to project various computer signals as well as
NTSC/PAL/SECAM video signals onto a screen. Little space is required for
installation and large images can easily be realized.
●Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly
efficient optical system.
●Whisper Mode Equipped
Special mode is available for reducing projector noise to achieve quieter operation.
●User Memory Function
This projector can memorize 4 settings by MY MEMORY function.
●Partial Magnification Function
Interesting parts of images can be magnified for closer viewing.
●Keystone Distortion Correction
Quick correction of distorted images electrically.
●Optical Lens Shift
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position,
use the LENS SHIFT buttons.
Preparation
Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”.
Your projector should come with the items shown there. Contact your dealer
anything is missing.
NOTE • Keep the original packing material for future reshipment. For moving the projector, be
sure to use the original packing material. Use special caution for the lens part.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
2
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ3
Contents
Projector Features …………………2
Preparation …………………………2
Part Names …………………………4
Projector ……………………………4
Control Buttons ……………………5
Remote control ……………………5
Setting Up ……………………………6
Arrangement ………………………6
Adjusting The Projector’s
Elevator ……………………………7
Using The Lens shift Buttons ……7
Connecting Your Devices…………8
Connecting The Power Supply …11
Remote Control ……………………12
About The Laser Pointer ………12
Putting Batteries …………………12
Operating The
Remote Control …………………13
Using The Remote
ID Feature…………………………13
Using The Mouse/Keyboard
Control Function …………………14
Power ON/OFF ……………………15
Turning On The Power …………15
Turning Off The Power …………15
Operating …………………………16
Selecting An Input Signal ………16
Selecting The Aspect Ratio ……17
Using The Automatic
Adjustment Feature………………17
Adjusting The Picture Position …18
Correcting The Keystone
Distortion …………………………18
Adjusting The Volume …………19
Muting The Sound ………………19
Temporarily Blanking
The Screen ………………………19
Freezing The Screen ……………20
Using The Magnify Feature ……20
Displaying The Child Window …21
Selecting An Audio Input ………21
Multifunctional Settings …………22
Using The Menu Functions ……22
MAIN Menu ………………………23
PICTURE-1 Menu ………………24
PICTURE-2 Menu ………………26
INPUT Menu ……………………27
AUTO Menu ………………………29
SCREEN Menu …………………31
OPTION Menu ……………………33
NETWORK Menu ………………35
Network Setting Up ………………36
Lamp ………………………………37
Replacing The Lamp ……………38
Air Filter ……………………………39
Caring For The Air Filter…………39
Other Care …………………………40
Caring For The Inside Of
The Projector ……………………40
Caring For The Lens ……………40
Caring For The Cabinet And
Remote Control …………………40
Troubleshooting …………………41
Related Messages ………………41
Regarding The Indicator
Lamps ……………………………43
Phenomena That May Easily Be
Mistaken For Machine Defects …45
Warranty And After-Service ……47
Specifications ……………………47
TECHNICAL
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
3
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ4
Part Names
Projector
TEMP
LAMP
STANDBY/ON
VIDEO
MENU
BNG
COMPONENT
S-VIDEO
INTER
RGB
LENS SHIFT
FOCUS
RESET
M1-D
INPUT
ZOOM
SEARCH
KEYSTONE
6
3
5
1
2
4
1
2
3
4
5
Elevator button
Elevator foot
Remote sensor
Lens cap
Lens
The picture is projected from
here.
6 Filter cover
An air filter is inside.
Projector (Front/Right)
A
D
E
-
8 7
B
LENS SHIFT
BNG
COMPONENT
S-VIDEO
F
L
M1-D
INPUT
RGB
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
MENU
TEMP
LAMP
G
FOCUS
ZOOM
3
AUDIO IN1
REMOTE CONTRO
CONTROL
L
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
R-AUDIO IN-L
C
K
Y
V
VIDEO
BNC
M
H
I
S-VIDEO
J
9
0
Projector (Rear/Left)
A
B
C
D
E
F
G
H
I
J
K
L
M
7
8
9
0
-
RGB port
M1-D port
BNC port
AUDIO IN 1 port
AUDIO IN 2 port
CONTROL port
NETWORK port
AUDIO IN R/L port
VIDEO IN port
S-VIDEO port
COMPONENT port
RGB OUT port
AUDIO OUT port
REMOTE CONTROL port
DC OUT port
AC Inlet
Power switch
Control buttons
See the following page.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
4
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ5
Part Names (continued)
Control Buttons
KEYSTONE
e
7M1-D INPUT SEARCH 6
8 RGB
5 RESET
LENS SHIFT
FOCUS ZOOM
BNC
t
9
4
COMPONENT
ENTER
y
0S-VIDEO
MENU
r
u
- VIDEO
w q
= STANDBY/ON 2 3
TEMP LAMP
1
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
RESET
M1-D
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
Control Panel
on the Projector
1 STANDBY/ON button
and STANDBY/ON indicator
2 TEMP indicator
3 LAMP indicator
4 LENS SHIFT buttons
5 INPUT dial
6 SEARCH button
7 M1-D indicator
8 RGB indicator
9 BNC indicator
0 COMPONENT indicator
- S-VIDEO indicator
= VIDEO indicator
q ZOOM buttons
w FOCUS buttons
e KEYSTONE button
r MENU button
t RESET button
y ENTER button
u Cursor buttons
/ / /
Remote Control
1 STANDBY/ON button
4 LENS SHIFT buttons
6 SEARCH button
q
w
e
r
t
y
ZOOM buttons
FOCUS buttons
KEYSTONE button
MENU button
RESET button
ENTER button
(
Mouse left button)
y
(Rear)
i
1
q
4
w
u
o
LASER INDICATOR
STANDBY/ON VIDEO
RGB
p
+
+
LENS SHIFT FOCUS
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
ENTER
r
s
f
h
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
j
OFF
KEYSTONE SEARCH
u Cursor buttons
/ / /
(
Keyboard
Arrow keys / / / )
k
1 2 3
ID CHANGE
[
\
]
a
d
t
g
l
;
6
'
i
o
p
[
]
\
a
s
d
f
g
h
j
k
l
;
'
LASER INDICATOR
VIDEO button
RGB button
BLANK button
ASPECT button
LASER button
Cursor buttons
/ / /
(
Mouse move pointer)
ESC button
(
Keyboard ESC key)
(
Mouse right button)
POSITION button
AUTO button
PinP button
MAGNIFY buttons
FREEZE button
VOLUME button
MUTE button
ID CHANGE switch
e
Remote Control
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
5
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ6
Setting Up
Arrangement
WARNING • Before installation, make sure that the projector is turned off and the
power code is disconnected.
• Do not set up and move the projector, while it is hot.
• Install the projector in a suitable environment according to instructions of the “User’s
Manual – Safety Guide” and this manual.
• The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance. The values shown in the table are calculated for a full size screen. (±10%)
Reference for
the 4:3 aspect ratio
Screen
Lens center
b
m
n
Side View
a
Reference for
the 16:9 aspect ratio
Screen
Lens center
b
m
n
a
Side View
40 (1.0)
a [inch (m)]
b [inch (cm)]
Min.
Max. m:n=1:1 m:n=10:0
46(1.2) 71(1.8) 12(30) 24(61)
60 (1.5)
71(1.8) 107(2.7) 18(46)
36(91)
70 (1.8)
83(2.1) 126(3.2) 21(53)
42(107)
Screen Size
[inch (m)]
80 (2.0)
95(2.4) 144(3.7) 24(61)
48(122)
100 (2.5)
120(3.0) 181(4.6) 30(76)
60(152)
120 (3.0)
144(3.7) 217(5.5) 36(91)
72(183)
150 (3.8)
181(4.6) 272(6.9) 45(114) 90(229)
200 (5.1)
243(6.2) 364(9.2) 60(152) 120(305)
250 (6.4)
304(7.7) 455(11.6) 75(191) 150(381)
300 (7.6)
366(9.3) 547(13.9) 90(229) 180(457)
350 (8.9)
427(10.9) 638(16.2) 105(267) 210(533)
400 (10.2)
489(12.4) 730(18.5) 120(305) 240(610)
500 (12.7)
612(15.5) 913(23.2) 150(381) 300(762)
Screen Size
[inch (m)]
40 (1.0)
a [inch (m)]
b [inch (cm)]
Min.
Max. m:n=1:1 m:n=10:0
50(1.3) 77(2.0) 10(25) 23(58)
60 (1.5)
77(2.0) 117(3.0) 15(37)
34(87)
70 (1.8)
91(2.3) 137(3.5) 17(44)
40(102)
80 (2.0)
104(2.6) 157(4.0) 20(50)
46(116)
100 (2.5)
131(3.3) 197(5.0) 25(62)
57(145)
120 (3.0)
158(4.0) 237(6.0) 29(75)
69(174)
150 (3.8)
198(5.0) 297(7.5) 37(93)
86(218)
200 (5.1)
265(6.7) 396(10.1) 49(125) 114(291)
250 (6.4)
332(8.4) 496(12.6) 61(156) 143(363)
300 (7.6)
399(10.1) 596(15.1) 74(187) 172(436)
350 (8.9)
466(11.8) 696(17.7) 86(218) 200(508)
400 (10.2)
533(13.5) 795(20.2) 98(249) 229(581)
450 (11.4)
600(15.2) 895(22.7) 110(280) 257(654)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
6
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ7
Setting Up (continued)
Adjusting The Projector's Elevator
WARNING • Do not touch about the lens and ventilation openings during use or
immediately after use to prevent a burn.
CAUTION • To prevent damaging the projector and injuring yourself, always
hold the projector whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
TEMP
LAMP
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
As necessary, you can also finely adjust the height of
the projector by twisting the elevator feet by hand.
STANDBY/ON
Raise or lower the projector to the desired height and
then release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
BNG
COMPONENT
S-VIDEO
3
Elevator buttons
VIDEO
2
Press and hold in the elevator buttons.
LENS SHIFT
1
Elevator feet
Using The Lens Shift Buttons
NOTE • Generally, better quality of a picture is available when the lens shift is set
to the center.
The lens of this projector can be shifted
vertically. When you want to finely adjust the
picture position, use the LENS SHIFT buttons
of the projector.
10:0
1:1
LENS SHIFT
LASER INDICATOR
STANDBY/ON VIDEO
LENS SHIFT buttons
Projector
+
+
LENS SHIFT FOCUS
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
Remote control
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
7
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ8
Setting Up (continued)
Connecting Your Devices
WARNING • Whenever attempting to connect other devices to the projector, read
thoroughly the "User's Manual - Safety Guide", this manual and the manual of each
device to be connected. Incorrect connecting could result in fire or electrical shock.
CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to the
device and/or projector.
ATTENTION • Make sure that you connect devices to the correct port. Incorrect
connection may result in malfunction and/or damage to the device and/or projector.
Refer to the section “Technical” of this manual for the pin assignment of connectors and
RS-232C communication data.
• Some cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
• Whenever attempting to connect a laptop computer to the projector, be sure to
activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
NOTE • Some computers may have multiple display screen modes. Use of some of
these modes may not be compatible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input,
automatic adjust function may take some time and may not be completed. In this
case, you may not be able to see a check box to select “Yes/No” for the new
resolution on Windows. Then the resolution will go back to the original. It might be
recommended to use other CRT or TFT monitors to change the resolution.
NOTE Plug-and-Play Capability
• Plug-and-Play is a system incorporated in the computer, its operating system and
peripheral equipment (i.e. display devices).
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other
type of connection is attempted.
• Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
8
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ9
Setting Up (continued)
Please refer to the following (for example) for connecting your devices. See the rear of the projector.
You can see the ports.
Examples of connection with a computer
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
R-AUDIO IN-L
Computer
Y
V
BNC
VIDEO
S-VIDEO
Projector
A
RGB out
RGB cable
RGB
Audio out
Stereo Mini cable
AUDIO IN 2
F G
E
CONTROL
E A
AUDIO IN2
F
RS-232C port
RS-232C cable
CONTROL
Network port
CAT-5 cable
NETWORK
R/CR/PR
AUDIO OUT
RGB OUT
RGB
G/Y
B/CB/PB
NETWORK
REMOTE CONTROL
AUDIO IN1
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
G
■ If using a M1-D input (to mouse control)
B
DVI port
M1-D
D
B
CONTROL
AUDIO OUT
AUDIO IN2
USB port
M1-D cable
R/CR/PR
NETWORK
REMOTE CONTROL
AUDIO IN1
RGB OUT
RGB
G/Y
B/CB/PB
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
D
Audio out
Stereo Mini cable
AUDIO IN 1
■ If using a BNC input
C
R/CR/PR G/Y B/CB/PB H
RGB out
BNC cable
V
R/CR/PR
G/Y
B/CB/PB
H
V
D
CONTROL
AUDIO OUT
AUDIO IN2
R/CR/PR
NETWORK
REMOTE CONTROL
AUDIO IN1
RGB OUT
RGB
G/Y
C
B/CB/PB
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
D
Audio out
Stereo Mini cable
AUDIO IN 1
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
9
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ10
Setting Up (continued)
Examples of connection with a VCR/DVD Player
VCR/DVD Player
Projector
CONTROL
NETWORK
REMOTE CONTROL
AUDIO IN1
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
Video out
R-AUDIO IN
AUDIO IN-L
VIDEO IN
AUDIO OUT
AUDIO IN2
H
I
R/CR/PR
RGB OUT
RGB
G/Y
B/CB/PB
H
CR/PR Ca/Pa
Y
HI
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
■ If using a s-video signal
J
S-video out
S-video cable
S -VIDEO
CONTROL
AUDIO OUT
AUDIO IN2
RGB OUT
RGB
CR/PR Ca/Pa
R-AUDIO IN
AUDIO IN-L
R/CR/PR
G/Y
H
B/CB/PB
H
Y
H
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
NETWORK
REMOTE CONTROL
AUDIO IN1
V
R-AUDIO IN-L
J
VIDEO
S-VIDEO
BNC
■ If using a component signal
COMPONENT
CR/PR out
CB/PB out
Y out
CR/PR
CB/PB
Y
K
CONTROL
REMOTE CONTROL
AUDIO IN1
AUDIO OUT
AUDIO IN2
R/CR/PR
R-AUDIO IN-L VIDEO
Audio out (R)
Audio out (L)
R-AUDIO IN
AUDIO IN-L
RGB OUT
RGB
G/Y
B/CB/PB
H
K
H
CR/PR Ca/Pa
V
R-AUDIO IN-L
H
NETWORK
Y
VIDEO
S-VIDEO
BNC
■ If using a SCART RGB input
COMPONENT
R-AUDIO IN-L VIDEO
SCART
RGB out
SCART
adapter
R (CR/PR)
B (CB/PB)
G (Y)
R-AUDIO IN
AUDIO IN-L
VIDEO IN
CONTROL
REMOTE CONTROL
AUDIO IN1
K
AUDIO OUT
AUDIO IN2
R/CR/PR
RGB OUT
RGB
G/Y
B/CB/PB
H
V
K
HI
CR/PR Ca/Pa
R-AUDIO IN-L
H
NETWORK
Y
VIDEO
S-VIDEO
BNC
I
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
10
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ11
Setting Up (continued)
Connecting to a monitor
CONTROL
L
AUDIO IN1
AUDIO IN2
Monitor
R/CR/PR
G/Y
AUDIO OUT
RGB OUT
RGB
Projector
B/CB/PB
H
CR/PR Ca/Pa
RGB in
RGB cable
Y
V
R-AUDIO IN-L
L
NETWORK
REMOTE CONTROL
VIDEO
S-VIDEO
BNC
RGB OUT
Connecting to a speaker (with amplifier)
CONTROL
Speaker
Projector
AUDIO IN2
RGB
G/Y
RGB OUT
B/CB/PB
M
Stereo Mini cable
M
AUDIO OUT
R/CR/PR
Audio in
NETWORK
REMOTE CONTROL
AUDIO IN1
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
AUDIO OUT
Connecting The Power Supply
WARNING • Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –
Safety Guide” and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect the connector of the power cord to
the AC inlet of the projector.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
2
Firmly plug the power cord’s plug into the
outlet.
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
BNC
S-VIDEO
AC Inlet
Connector
Outlet
Plug
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
11
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ12
Remote Control
About The Laser Pointer
WARNING • The laser pointer of the remote control is used in place of a finger or
rod. Never look directly into the laser beam outlet or point the laser beam at other
people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
R
TO
CA
B
DI
R
RG
IN
SE
LA
CAUTION
DB
STAN
EO
Y/O
N
VID
+
+
+
LASER RADIATION
DO NOT STARE INTO BEAM
LENS
–
–
AS
–
R
SE
CT
LA
PE
K
AN
WAVE LENGTH: 640-660nm
MAX OUTPUT: 1mW
CLASS 2 LASER PRODUCT
BL
T
NEX
Comples with 21 CFR, 1040.10 AND 1040.11
IEO60825-1:1993+A1:1997+A2:2001
IOUS
PREV
LASER-STRAHLING
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
WAVE LENGTH:640-660nm MAX OUTPUT:1mW
レーザー光
ビームをのぞきこまないこと
クラス2レーザー製品 JIS C 6802(1998)
最大出力:1.0mW 波長:640−660nm
MODEL:H-IRC4
MANUFACTURER:
MANUFACTURED
OM
ZO
S
CU
FO
SHIFT
R
TE
EN
U
MEN
TO
AU
C
ET
ES
RES
VO
ON
SITI
PO
レーザー光をのぞき込まないこと。
レーザー光を人に向けないこと。
子供に使わせないこと。
製造者:INTERLINK ELECTRONICS
B
JANUARY,2003
INTERLINK K.K.
1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN
101-0031
MADE IN CHINA
ME
LU
PinP
FY
GN
MA N
O
TE
MU
ZE
EE
CH
FR
AR
NE
OFF
1
2
JQA
3
GE
AN
ID
PS
C
SE
TO
YS
KE
CH
MADE IN CHINA
This remote control has a laser pointer in place of a finger or rod. The laser beam works and the
LASER INDICATOR lights while the LASER button is pressed.
Putting Batteries
CAUTION • About the battery
Keep a battery away from children and pets.
Use only the battery specified: two AA batteries.
Do not mix new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading the
battery (as indicated in the remote control).
• Dispose of batteries in accord with environmental laws.
•
•
•
•
1
Remove the battery
cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
2
Insert the batteries.
Align and insert the
two AA batteries
according to their plus
minus terminals (as
indicated in the remote
control).
3
Close the battery
cover.
Replace the battery
cover in the direction
of the arrow and snap
it back into place.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
12
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ13
Remote Control (continued)
Operating The Remote Control
CAUTION • Do not disassemble the remote control.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects on it. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
NOTE • Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
• The remote control works with the
projector’s remote sensor.
• Front remote sensor is 3 meters with a 60
degree range (30 degrees to the left and
right of a remote sensor).
Rear remote sensor is 3 meters with a 40
approximately
degree range (20 degrees to the left and
approximately
3 meters
3 meters
right of a remote sensor).
• Also a remote signal reflected in the screen etc.
may be available. If it is difficult to send a remote signal to the sensor directly, please try.
• Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the
remote control in an area free from obstacles that could block the remote control’s output signal to the projector.
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
FOCUS
RESET
M1-D
INPUT
ZOOM
SEARCH
KEYSTONE
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
es
S-VIDEO
gre
de
20
gre
de
30
30 degrees
es
BNC
20 degrees
RGB
memo You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL
ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
Using The Remote ID Feature
This is the function to properly use when you use two or
three same type projectors at the same time. This function
should be used combining a setup of a projector.
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
1
Set the ID number to the projector beforehand,
referring to the item “IR REMOTE ID” of the section
“OPTION Menu”.
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
ENTER
ID CHANGE
switch
memo When the ALL is selected to the item “IR
REMOTE ID” of the OPTION menu, the projector is
controlled by a remote control irrespective of the
position of the ID CHAGE switch.
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
OFF
KEYSTONE SEARCH
2
Slide the knob of the switch into the position of the
ID number of the projector you want to control.
1 2 3
ID CHANGE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
13
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ14
Remote Control (continued)
Using The Mouse/Keyboard Control Function
CAUTION • Before connecting, read the manuals of the device you will connect.
Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Do not unplug the connector cables while the computer is operating.
Using the USB control feature, you can use the remote control as a simplified mouse or
keyboard of the computer.
Connect the M1-D port of the projector to the computer via the M1-D cable. Then
functions illustrated below will be enabled.
memo The USB control can be used with
Windows 95 OSR 2.1 or higher. It may not be
possible to use the remote control, depending
on the computer’s configurations and mouse
drivers.
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
memo The function can be used only for the
NEXT
Mouse move pointer
ENTER
functions illustrated on the right.
memo The projector would be enumerated as a
mouse and a keyboard of HID (Human
Interface Device) class devices, after
connecting cable.
ESC
MENU
POSITION
RESET
AUTO
PinP
VOLUME
FREEZE
MUTE
MAGNFY
Mouse left button
Keyboard
Arrow keys / / /
ON
OFF
KEYSTONE SEARCH
Mouse right button
1 2 3
ID CHANGE
(Front)
Keyboard ESC key
(Rear)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
14
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ15
Power ON/OFF
WARNING • When the power is ON, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE • Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Turning On The Power
STANDBY/ON
1
Remove the lens cap.
2
Set the power switch to [ | ] (ON).
The STANDBY/ON indicator will light to solid orange.
STANDBY/ON button / indicator
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
LASER INDICATOR
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
STANDBY/ON VIDEO
AUDIO OUT
CR/PR Ca/Pa
V
R-AUDIO IN-L
VIDEO
BNC
S-VIDEO
+
Press the STANDBY/ON button.
The projector lamp will light up and the
STANDBY/ON indicator will begin blinking green.
When the power is completely on, the indicator
will stop blinking and light green.
+
+
LENS SHIFT FOCUS
STANDBY/ON
3
RGB
Y
ZOOM
–
–
–
BLANK
ASPECT
LASER
STANDBY/ON
button
Power switch (ON position)
LENS SHIFT
LASER INDICATOR
STANDBY/ON VIDEO
+
4
5
Use the LENS SHIFT buttons to shift the
picture upward or downward.
RGB
+
+
LENS SHIFT FOCUS
ZOOM
–
–
–
BLANK
ASPECT
LASER
LENS SHIFT
buttons
Select an input signal according to the
section “Selecting An Input Signal” of the
following page.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
R-AUDIO IN-L
BNC
Y
V
VIDEO
S-VIDEO
Turning Off The Power
1
Press the STANDBY/ON button.
The message “Power off?” will appear on
the screen for approximately 5 seconds.
STANDBY/ON
STANDBY/ON button / indicator
2
Press the STANDBY/ON button again while
“Power off?” the message is visible.
The projector lamp will go off, and the
STANDBY/ON indicator will begin blanking orange.
Then the STANDBY/ON indicator will stop blinking
and light to solid orange when the lamp cooling is
complete.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
LASER INDICATOR
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
STANDBY/ON VIDEO
RGB
V
R-AUDIO IN-L
BNC
Y
VIDEO
S-VIDEO
+
+
+
LENS SHIFT FOCUS
–
–
S
STANDBY/ON
ZOOM
–
C
S
STANDBY/ON
button
Power switch (OFF position)
3
Switch the power switch to [O] (OFF).
The STANDBY/ON indicator will go off.
4
Attached the lens cap.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
15
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ16
Operating
Selecting An Input Signal
1
Select an input signal.
■ Using the INPUT dial
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to project.
M1-D
RGB
BNC
SEARCH button
SEARCH
M1-D
INPUT
RGB
RESET
BNC
COMPONENT
ENTER
MENU
S-VIDEO
VIDEO
S-VIDEO
COMPONENT
VIDEO
INPUT dial
■ Using SEARCH button
Press the SEARCH button of the projector or the
remote control.
Pressing the button automatically cycles through input
ports and displays the picture of retrieved signal.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
R/CR/PR
BNC
S-VIDEO
RGB OUT
CONTROL
KEYSTONE
SEARCH
RESET
FOCUS
ZOOM
MENU
LAMP
NETWORK
B/CB/PB
H
AUDIO OUT
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
VIDEO button
LASER INDICATOR
+
RGB button
RGB
+
+
LENS SHIFT FOCUS
VIDEO
G/Y
BNC
STANDBY/ON VIDEO
RGB
M1-D
INPUT
INTER
TEMP
REMOTE CONTROL
AUDIO IN2
memo If no signal is found or the projector is unstable to
find an input signal at any of its ports, it will turn to the state
it was in prior to the search.
M1-D
RGB
VIDEO
STANDBY/ON
AUDIO IN1
ZOOM
–
–
–
BLANK
ASPECT
LASER
COMPONENT
PREVIOUS
■ Using RGB button
NEXT
ENTER
Press the RGB button of the remote control.
Pressing the button toggles between the RGB ports
as shown below Select the signal you wish to project.
SEARCH button
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
OFF
M1-D
RGB
BNC
KEYSTONE SEARCH
1 2 3
ID CHANGE
■ Using VIDEO button
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO ports
as shown below Select the signal you wish to project.
COMPONENT
2
S-VIDEO
VIDEO
ZOOM
FOCUS
ZOOM
buttons
FOCUS
buttons
Use the ZOOM buttons to adjust the screen size.
LENS SHIFT
BNG
COMPONENT
S-VIDEO
RGB
M1-D
INPUT
KEYSTONE
SEARCH
RESET
INTER
VIDEO
STANDBY/ON
FOCUS
ZOOM
MENU
TEMP
LAMP
AUDIO IN1
REMOTE CONTROL
CONTROL
NETWORK
AUDIO IN2
RGB
R/CR/PR
G/Y
B/CB/PB
RGB OUT
H
AUDIO OUT
CR/PR Ca/Pa
V
R-AUDIO IN-L
BNC
3
Y
VIDEO
S-VIDEO
Use the FOCUS buttons to adjust the focus.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
16
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ17
Operating (continued)
Selecting The Aspect Ratio
1
Press the Aspect button to toggle between the
modes for aspect ratio.
■ At a M1-D signal
NORMAL
LASER INDICATOR
STANDBY/ON VIDEO
16:9
4:3
memo NORMAL keeps the original aspect ratio of the
input signal.
■ At a RGB signal (not M1-D)
+
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
ASPECT button
NEXT
ENTER
ESC
MENU
POSITION
RESET
AUTO
PinP
VOLUME
FREEZE
MUTE
MAGNFY
4:3
RGB
+
LENS SHIFT FOCUS
ON
16:9
OFF
KEYSTONE SEARCH
■ At a video signal
4:3
16:9
1 2 3
ID CHANGE
SMALL
memo At a HDTV signal of 1125i or 750p, only 16:9 can
be selected.
Using The Automatic Adjustment Feature
memo The automatic adjustment operation requires approximately 10 seconds. Also,
please note that it may not function correctly with some input.
1
Press the AUTO button.
■ At a RGB signal
The Vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE)
and horizontal size (H SIZE) will be automatically
adjusted.
memo Make sure that the application window is set to
its maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
ENTER
AUTO button
ESC
MENU
POSITION
RESET
AUTO
PinP
VOLUME
FREEZE
MUTE
MAGNFY
ON
■ At a video signal
The signal type mode best suited for the respective
input signal will be selected automatically.
memo This function is available only when the AUTO is
selected to the item VIDEO of the INPUT menu. For a
component video signal, the signal type is identified
automatically independently of this function.
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
17
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ18
Operating (continued)
Adjusting The Picture Position
memo This function is available only for RGB signals.
1
Press the POSITION button.
As illustrated on the right, a
dialog will appear on the
screen to aid you in adjusting
the position.
LASER INDICATOR
STANDBY/ON VIDEO
+
LENS SHIFT FOCUS
POSITION
RGB
+
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
Cursor
buttons
ENTER
2
Use the cursor buttons
/ / /
to adjust the
position.
memo When you want to initialize the position, press
the RESET button during adjustment.
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
POSITION
button
ON
OFF
KEYSTONE SEARCH
3
1 2 3
Press the POSITION button again to close the
dialog and complete this operation.
memo Even if you don't do anything, the dialog will
automatically disappear after a few seconds.
RESET
button
ID CHANGE
Correcting The Keystone Distortion
1
Press the KEYSTONE button.
As illustrated on the right, a dialog
will appear on the screen to aid you
in correcting the keystone
distortion.
LASER INDICATOR
KEYSTONE
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
2
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
Use the cursor buttons
/
to
select the direction of distortion to
correct ( or ).
RGB
NEXT
Cursor
buttons
ENTER
+0
+0
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
3
Use the cursor buttons
distortion.
/
to correct the
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
4
Press the KEYSTONE button again to close the
dialog and complete this operation.
memo Even if you don't do anything, the dialog will
automatically disappear after a few seconds.
memo When this adjustment is excessive, certain
degradation may appear on the picture. Also,
please note that it may not function correctly with
some input.
KEYSTONE
button
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
18
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ19
Operating (continued)
Adjusting The Volume
1
2
3
Press the VOLUME button.
As illustrated on the right, a dialog
will appear on the screen to aid you
in adjusting the volume.
Use the cursor buttons
adjust the volume.
/
VOLUME
LASER INDICATOR
STANDBY/ON VIDEO
+
RGB
+
+
LENS SHIFT FOCUS
to
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
Cursor
buttons
ENTER
16
Press the VOLUME button again to close the
dialog and complete this operation.
ESC
MENU
POSITION
RESET
AUTO
PinP
VOLUME
FREEZE
MUTE
MAGNFY
ON
OFF
KEYSTONE SEARCH
memo Even if you don't do anything, the dialog will
VOLUME
button
1 2 3
ID CHANGE
automatically disappear after a few seconds.
Muting The Sound
LASER INDICATOR
STANDBY/ON VIDEO
+
1
2
Press the MUTE button.
As illustrated on the right, a dialog
will appear on the screen indicating
that you have muted the sound.
Press the MUTE or VOLUME
button to restore the sound.
RGB
+
+
LENS SHIFT FOCUS
VOLUME
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
ENTER
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
16
ON
OFF
memo Even if you don't do anything,
KEYSTONE SEARCH
1 2 3
the dialog will automatically
disappear after a few seconds.
MUTE
button
ID CHANGE
Temporarily Blanking The Screen
LASER INDICATOR
STANDBY/ON VIDEO
1
Press the BLANK button.
The input signal screen will shut off, and a BLANK
screen will appear.
memo You can set the BLANK screen using the
menu. Please refer to the item “BLANK” of the
table of the section “SCREEN Menu”.
+
+
LENS SHIFT FOCUS
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
BLANK
button
NEXT
ENTER
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
2
Press the BLANK button again to remove the
blank screen, and return to the input signal screen.
OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
19
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ20
Operating (continued)
Freezing The Screen
1
Press the FREEZE button.
As illustrated on the right, a
dialog will appear on the
screen, and the screen will
freeze at the current image.
LASER INDICATOR
STANDBY/ON VIDEO
+
LENS SHIFT FOCUS
FREEZE
2
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
Press the FREEZE button again to restore the
screen to normal.
The icon “||” will change to the icon “ ”. And after
a couple of seconds, the dialog will be closed and
the screen will be restored to normal.
RGB
+
NEXT
ENTER
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
FREEZE
button
OFF
KEYSTONE SEARCH
memo The freezing feature will automatically finish if a remote control’s
1 2 3
ID CHANGE
button that changes some display state (ex. blanking the screen,
displaying a dialog or a menu, adjusting the picture, changing the input
signal) is pressed, or a button of projector is pressed.
NOTE • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
Using The Magunify Feature
1
Press the MAGNIFY
button.
As illustrated on the right, a dialog
will appear on the screen to aid
you in magnifying the picture.
ON
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
MAGNIFY
–
–
ASPECT
LASER
3
Press the POSITION button, then use the cursor
buttons
/ / /
to select the area to zoom.
Press the POSITION button again to finalize the
zoom area.
+
–
BLANK
PREVIOUS
2
RGB
ZOOM
NEXT
Cursor
buttons
ENTER
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
POSITION
button
ON
OFF
KEYSTONE SEARCH
1 2 3
4
Use the cursor buttons
level.
/
to adjust the zoom
5
Press the MAGNIFY
button again to close the
dialog and complete this operation.
ID CHANGE
MAGNIFY
buttons
OFF
memo The magnify feature will automatically finish if the
automatic adjustment is execute, or the aspect, the signal
type mode of video or the signal input state is changed.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
20
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ21
Operating (continued)
Displaying The Child Window
memo This feature called "PinP (Picture in Picture)" is available only when a RGB signal is
selected to main screen.
1
2
Press the PinP button.
The child window with a picture of a video signal
will appear.
Press the PinP button again to change the size of
the child window or close the window.
LASER INDICATOR
STANDBY/ON VIDEO
+
RGB
+
LENS SHIFT FOCUS
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
ENTER
Small child window
Large child window
No child window
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
PinP button
ON
memo You can select the video signal to display in the
OFF
KEYSTONE SEARCH
child window, and the position of the child window.
Please refer to the items “P.INP. INPUT” and “P.INP.
POSIT.” of the table of the section “INPUT Menu”.
1 2 3
ID CHANGE
Selecting An Audio Input
memo This feature is available only when the child window is on the screen.
1
2
When the child window is on the
screen, press the VOLUME button.
As illustrated on the right, a dialog
will appear on the screen.
Use the cursor buttons
select an audio input.
/
VOLUME
RGB
LASER INDICATOR
Video
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
to
RGB
+
ZOOM
–
–
–
BLANK
ASPECT
LASER
PREVIOUS
NEXT
Cursor
buttons
ENTER
16
RGB (Audio input for the main screen)
ESC
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
Video (Audio input for the child window)
OFF
VOLUME
button
KEYSTONE SEARCH
memo You also can adjust the volume using the cursor
buttons / . Please refer to the section “Adjusting
1 2 3
ID CHANGE
The Volume”.
3
Press the VOLUME button again to close the
dialog and complete this operation.
memo Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
21
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ22
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN, OPTION and NETWORK. Each of these menus is operated using the same
methods. The basic operations of these menus are as follows.
1
Press the MENU button.
The menu will appear on
the screen.
ex. Turning off the built-in speaker
LASER INDICATOR
STANDBY/ON VIDEO
+
+
LENS SHIFT FOCUS
RGB
–
–
BLANK
ASPECT
LASER
PREVIOUS
1) Press the MENU button.
+
ZOOM
–
Cursor
buttons
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
NEXT
ENTER
2
3
4
Use the cursor buttons
/
to select a menu,
then press the
(or the
ENTER) button to
progress.
The display of the
selected menu will
appear.
MENU
POSITION
RESET
AUTO
MAGNFY
PinP
VOLUME
FREEZE
MUTE
ON
OFF
KEYSTONE SEARCH
1 2 3
RESET
button
ID CHANGE
ESC button
Use the cursor buttons
/
to select an item,
then press the
(or the
ENTER) button to
progress.
The operation display of
the selected item will
appear.
Use the cursor buttons
MENU
button
ESC
ENTER
button
/
to operate the item.
memo When you want to reset the adjustment,
press the RESET button during the operation. Note
that the items whose functions are performed
simultaneously with operating (ex. LANGUAGE,
WHISPER, H PHASE etc.) are not reset.
memo When you want to return to the previous
display, press the
or ESC button.
5
Press the MENU button again to close the menu
display and complete this operation.
+0
+0
4:3
NORMAL
NORMAL
ENGLISH
BRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language]
RESET
2) Select the “OPTION”
using the
button, then
press the
button.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
VOLUME
SPEAKER
IR REMOTE
IR REMOTE ID
LAMP TIME
FILTER TIME
SERVICE
RESET
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
16
TURN ON
ALL
1234 h
4321 h
VOLUME
SPEAKER
IR REMOTE
IR REMOTE ID
LAMP TIME
FILTER TIME
SERVICE
RESET
16
TURN ON
ALL
1234 h
4321 h
3) Select the “SPEAKER”
using the
button, then
press the
button.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
VOLUME
SPEAKER
IR REMOTE
IR REMOTE ID
LAMP TIME
FILTER TIME
SERVICE
RESET
16
TURN ON
ALL
1234 h
4321 h
OPTION
SPEAKER
TURN ON
TURN OFF
4) Use the cursor button
to select the “TURN OFF”.
OPTION
SPEAKER
TURN ON
TURN OFF
5) Press the MENU button.
memo Even if you don’t do anything, the menu will
automatically disappear after a few seconds
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
22
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ23
Multifunctional Settings (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
BRIGHT
CONTRAST
ASPECT
WHISPER
BRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language]
RESET
+0
+0
4:3
NORMAL
NORMAL
ENGLISH
Description
Adjust the brightness using the
Adjust the contrast using the
/
/
buttons. :
buttons. :
Light Dark
Strong Weak
Select an aspect ratio using the
/
buttons. :
■ At a M1-D signal
NORMAL 4:3 16:9
The NORMAL keeps the original aspect ratio of the input signal.
■ At a RGB signal (not M1-D)
4:3 16:9
■ At a video signal
4:3 16:9 SMALL
memo At a HDTV signal of 1125i or 750p, only the 16:9 can be selected.
Select the NORMAL or the WHISPER using the
/
buttons. :
NORMAL WHISPER
When the WHISPER is selected, acoustic noise and screen brightness are
reduced.
Select a mirror status using the
/
buttons. :
NORMAL H:INVERT V:INVERT H&V:INVERT
MIRROR
ex.
Select a menu language using the
/
buttons. :
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
LANGUAGE
NORSK NEDERLANDS 日本語 PORTUGUÊS 中文
SVENSKA RESET
SUOMI POLSKI
Select the EXECUTE using the
button to reset the MAIN menu items. :
EXECUTE CANCEL
The items of the MAIN menu are collectively returned to the initial setting. Note
that the items “WHISPER” and “LANGUAGE” are not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
23
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ24
Multifunctional Settings (continued)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
Item
GAMMA
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
COLOR
TINT
MY MEMORY
NORMAL
+0
+0
+0
+0
+0
+0
LOAD1
Description
Select a gamma mode using the
/
buttons. :
NORMAL CINEMA DYNAMIC CUSTOM
Selecting the CUSTOM and then pressing the
(or the ENTER) button calls
the CUSTOM menu.
CUSTOM Menu
GAMMA
2.2
GAMMA
Select an item using the
/
buttons, and press the NORMAL
CINEMA
HIGH
COLOR TEMP
DYNAMIC
100
R
(or the ENTER) button to perform each function.
CUSTOM
100
G
100
B
GAMMA COLOR TEMP R G B
memo The R, G and B can be selected only when the : SELECT
USER is selected under the COLOR TEMP.
GAMMA
GAMMA
COLOR TEMP
Adjust the gamma data using the
Up Down
/
Select a color temperature using the
HIGH MIDDLE LOW USER
buttons. :
/
buttons. :
R
Adjust the red color level for the USER mode of the COLOR
TEMP using the
/
buttons. : Strong Weak
G
Adjust the green color level for the USER mode of the COLOR
TEMP using the
/
buttons. : Strong Weak
B
Adjust the blue color level for the USER mode of the COLOR
TEMP using the
/
buttons. : Strong Weak
COLOR BAL R
Adjust the red color balance using the
Strong Weak
COLOR BAL G
Adjust the green color balance using the
Strong Weak
COLOR BAL B
Adjust the blue color balance using the
Strong Weak
/
buttons. :
/
/
buttons. :
buttons. :
SHARPNESS
Adjust the sharpness using the
/
buttons. :
Clear Soft
memo This item can be selected only at a video signal.
COLOR
Adjust the whole color using the
/
buttons. :
Strong Weak
memo This item can be selected only at a video signal.
TINT
Adjust the tint using the
/
buttons. :
Green Red
memo This item can be selected only at a video signal.
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
24
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ25
Multifunctional Settings (continued)
PICTURE-1 Menu (continued)
Item
Description
Select a command to load or save using the
/
buttons, and then press
the
(or the ENTER) button to perform the function.:
LOAD1 LOAD2 LOAD3 LOAD4
SAVE1 SAVE2 SAVE3 SAVE4
MY MEMORY
RESET
This projector has 4 numbered memories for adjustment data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment
data on the memory whose number corresponds with the command’s number.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the
memory whose number corresponds with the command’s number, and adjusts
the picture automatically depending on the data.
Select the EXECUTE using the
button to reset the PICTURE-1 menu items. :
EXECUTE CANCEL
The items of the PICTURE-1 menu are collectively returned to the initial setting.
Note that the items “MY MEMORY” and “GAMMA” of the CUSTOM menu under
the item “GAMMA” are not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
25
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ26
Multifunctional Settings (continued)
PICTURE-2 Menu
With the PICTURE-2 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
RESET
20
142
31
1344
95
memo This menu cannot be selected at a M1-D signal.
Item
Description
V POSITION
Adjust the vertical position using the
/
buttons. :
Up Down
memo This item can be selected only at a RGB signal.
H POSITION
Adjust the horizontal position using the
/
buttons. :
Left Right
memo This item can be selected only at a RGB signal.
H PHASE
Adjust the horizontal phase to eliminate flicker using the
/
buttons. :
Right Left
memo This item can be selected only at a RGB signal or a component video
signal other than a COMPONENT port input of 525i/625i/SCART RGB.
H SIZE
Adjust the horizontal size using the
/
buttons. :
Large Small
memo This item can be selected only at a RGB signal.
memo When this adjustment is excessive, the picture may not be displayed
correctly. In such a case, please reset the adjustment pressing the RESET
button during this operation.
OVER SCAN
Adjust the over-scan ratio using the
/
buttons. :
Small Large
memo This item can be selected only at a video signal.
memo When this adjustment is too large, certain degradation may appear at
the frame area of the picture. In such a case, please adjust small.
RESET
Select the EXECUTE using the
button to reset the PICTURE-2 menu items. :
EXECUTE CANCEL
The items of the PICTURE-2 menu are collectively returned to the initial setting.
Note that the item “H PHASE” is not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
26
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ27
Multifunctional Settings (continued)
INPUT Menu
With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
COLOR SPACE
COMPONENT
VIDEO
3D-YCS
VIDEO NR
P. INP. INPUT
P. INP. POSIT.
POWERUP INPUT
AUTO
COMPONENT
AUTO
TURN OFF
LOW
VIDEO
RGB
Item
Description
COLOR SPACE
Select a color space mode using the
/
buttons. :
AUTO RGB SMPTE240 REC709 REC601
Selecting the AUTO automatically selects the optimum mode.
memo This item can be selected only at a RGB signal or a component video
signal other than a COMPONENT port input of 525i/625i/SCART RGB.
memo The AUTO operation may not work well at some signals. In such a case,
select the SMPTE240 or the REC709 for a HDTV signal.
COMPONENT
Select a function of COMPONENT port using the
/
buttons. :
COMPONENT SCART RGB
When the SCART RGB is selected, the COMPONENT port function as a port for
a SCART RGB signal input. Please refer to the section “Connecting Your
Devices”.
VIDEO
Select a signal type mode using the
/
buttons. :
AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL
Selecting the AUTO automatically selects the optimum mode.
memo This item is performs only at a video signal from the VIDEO port or the SVIDEO port. For a component video signal, the signal type is identified
automatically independently of this function.
memo The AUTO operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please select the mode
depending on the input signal.
3D-YCS
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the 3D-YCS mode works for a completely still
image, or images with few motions.
memo This item performs only at a video signal of NTSC3.58.
memo When this function performs, the setting of the item “VIDEO NR” of this
INPUT menu is not effective.
VIDEO NR
Select a noise reduction level using the
/
buttons. :
HIGH MIDDLE LOW
The noise on screen is reduced according to the selected level.
memo This item performs only at a video signal from the VIDEO port or the SVIDEO port. At a video signal of NTSC3.58, this function performs only when
the TURN OFF is selected to the item “3D-YSC” of this INPUT menu.
memo When this adjustment is excessive, certain degradation may appear on
the picture.
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
27
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ28
Multifunctional Settings (continued)
INPUT Menu (continued)
Item
Description
P.IN P. INPUT
Select a signal input port for the child window using the
/
buttons. :
VIDEO S-VIDEO
memo About the child window, please refer to the section “Displaying the Child
Window”.
P.IN P. POSIT.
Select the display position of the child window using the
/
buttons. :
memo About the child window, please refer to the section “Displaying the Child
Window”.
POWERUP
INPUT
Select a signal input port to display just when the projector is turned on, using
the
/
buttons. :
LAST INPUT M1-D RGB BNC COMPONENT S-VIDEO VIDEO
Selecting the LAST INPUT selects the port that was used at the last time.
Pressing the
(or the ENTER) button displays the INPUT INFORMATION
menu.
The INPUT INFORMATION menu shows the information about the current
signal input as illustrated below.
INFORMATION
INPUT-INFORMATION
RGB
1024x768 @60.0
FRAME LOCK
INPUT-INFORMATION
S-VIDEO
SECAM
AUTO
INPUT-INFORMATION
COMPONENT
575i @50
SCART RGB
memo The “FRAME LOCK” message means the frame lock function is working.
This function automatically works when a RGB signal with vertical frequency of
50 to 60 is input, and it displays a moving picture more smoothly.
memo The “SCART RGB” message means the COMPONENT port is working
as a SCART RGB port. Please refer to the item “COMPONENT” in this table.
S2-ASPECT
RESET
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, an S2-video signal can be identified and the
optimum aspect ratio is automatically selected.
memo This item is performs only at a S-VIDEO signal.
memo When the ASPECT button is used or the item “ASPECT” of the MAIN
menu is operated, the TURN OFF will be automatically selected to this item.
Select the EXECUTE using the
button to reset the INPUT menu items. :
EXECUTE CANCEL
The items of the INPUT menu are collectively returned to the initial setting. Note
that the item “INFORMATION” is not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
28
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ29
Multifunctional Settings (continued)
AUTO Menu
With the AUTO menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
ADJUST
POWER OFF
POWER ON
SEARCH
RESET
0 min
TURN ON
TURN ON
Item
Description
ADJUST
Pressing the
(or the ENTER) button performs the automatic adjustment.
■ At a RGB signal
The vertical position (V POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically
adjusted.
memo Make sure that the application window is set to its maximum size prior to
attempting to use this feature. Dark pictures may still be incorrectly adjusted.
Use a bright screen when adjusting.
■ At a video signal
The signal type mode best suited for the respective input signal will be
selected automatically.
memo This function is available only when the AUTO is selected to the item
“VIDEO” of the INPUT menu. For a component video signal, the signal type is
identified automatically independently of this function.
memo This operation requires approximately 10 seconds, and the message
“AUTO IN PROGRESS” is displayed during the operation.
memo This operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please select the
suitable mode to the item “VIDEO” of the INPUT menu.
Set the time using the
/
buttons. :
Long (max. 99 minutes) Short (min. 0 minute = DISABLE)
POWER OFF
POWER ON
AUTO
POWER OFF
ENABLE
AUTO
POWER OFF
DISABLE
1min
0min
ex.
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with a proper
signal (without no-signal and an unsuitable signal) reaches at the set time.
Please refer to the section “Turning Off The Power”.
Select the TURN ON or the TURN OFF using the
/
buttons.:
TURN ON TURN OFF
When the TURN ON is selected, you can turn the projector on without pressing
the STANDBY/ON button. Please refer to the section “Turning Off The Power”.
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
29
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ30
Multifunctional Settings (continued)
AUTO Menu (continued)
Item
Description
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, detecting no signal cycles through input ports
and displays the picture of retrieved signal.
M1-D
RGB
VIDEO
S-VIDEO
SEARCH
BNC
COMPONENT
memo When the TURN ON is selected, pressing the RGB button selects the
M1-D ports, and pressing the VIDEO button selects the COMPONENT port.
memo If no signal is found or the projector is unstable to find an input signal at
any of its ports, it will return to the state it was in prior to the search.
RESET
Select the EXECUTE using the
button to reset the AUTO menu items. :
EXECUTE CANCEL
The items of the AUTO menu are collectively returned to the initial setting. Note
that the item “ADJUST” is not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
30
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ31
Multifunctional Settings (continued)
SCREEN Menu
With the SCREEN menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
BLANK
START UP
MyScreen
MyScreen SIZE
MyScreen LOCK
MENU POSITION
MESSAGE
RESET
BLACK
ORIGINAL
x1
TURN OFF
TURN ON
Item
Description
BLANK
Select a type of the BLANK screen using the
/
buttons. :
MyScreen ORIGINAL BLUE WHITE BLACK
The BLANK screen is the screen, which is displayed by pressing the BLANK
button. The MyScreen is the screen you can register a desired screen, and the
ORIGINAL is the existing standard screen. The BLUE, the WHITE and the
BLACK are the non-pattered (plain) screens in each color.
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL
screens will change to the BLACK screen after several minutes.
memo For the MyScreen, please refer to the item “MyScreen” in this table.
START UP
Select a type of the START UP screen using the
/
buttons. :
MyScreen ORIGINAL TURN OFF
The START UP screen is the screen, which is displayed by detecting no signal
or an unsuitable signal.
The MyScreen is the screen you can register a desired screen, and the
ORIGINAL is the existing standard screen. When the TURN OFF is selected,
the BLUE is used.
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL
screens will change to the BLANK after several minutes. If also the BLANK
screen is the MyScreen or the ORIGINAL, it will change to the BLACK screen.
memo About the MyScreen, please refer to the item “MyScreen” in this table.
About the BLUE, BLACK and BLANK screens, please refer to the item “BLANK”
in this table.
MyScreen
Pressing the
(or the ENTER) button starts the MyScreen registration. Please
see the flow chart on the following page.
MyScreen SIZE
Select the size of the MyScreen using the
x1 FULL
/
buttons. :
Select the TURN ON or the TURN OFF using the
/
buttons.:
TURN ON TURN OFF
MyScreen LOCK
The TURN ON disables the operation of the item “MyScreen” of this SCREEN
menu.
After pressing the (or ENTER) button, adjust the menu position
using the
/
/
/
buttons.:
Up
MENU POSITION
Left + Right
Down
memo To finish this operation, press the ESC button but not the
button.
buttons. :
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
31
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ32
Multifunctional Settings (continued)
SCREEN Menu (continued)
Item
Description
MESSAGE
RESET
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the following message function works.
The message of the “AUTO IN PROGRESS” for the auto adjustment.
The message of the ”NO INPUT IS DETECTED”
The message of the ”SYNC IS OUT OF RANGE”
The message of the ”Searching …”
The message of the “Detecting …”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of “FOCUS” by adjusting the focus.
Select the EXECUTE using the
button to reset the SCREEN menu items. :
EXECUTE CANCEL
The items of the SCREEN menu are collectively returned to the initial setting.
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu.
Press the
button
The MyScreen
menu appears.
Do you capture the picture from
the current screen?
If the ESC/RESET
button is pressed ...
MyScreen
Do you start capturing this picture?
ESC
:NO
ENT
:YES
NO: Press the ESC/RESET button
YES: Press the ENTER button
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using / / / buttons,
and press the ENTER button to register.
Registering.
It takes about 1 minute to register.
MyScreen
Move the capture area
as you want.
ESC
:RETURN ENT :NEXT
My Screen
45%
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
MyScreen registration is finished.
If the picture registration failed,
the message of the right is displayed for a few seconds.
A capturing error has occurred.
Please try again.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
32
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ33
Multifunctional Settings (continued)
OPTION Menu
With the OPTION menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
VOLUME
SPEAKER
IR REMOTE
IR REMOTE ID
LAMP TIME
FILTER TIME
SERVICE
RESET
Description
VOLUME
Adjust the volume using the
High Low
SPEAKER
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
When the TURN ON is selected, the built-in speaker works.
IR REMOTE
16
TURN ON
1:□ 2:□ 3:□
ALL
1234 h
4321 h
/
buttons. :
Select a remote sensor using the
/
button (1), then switch
it using the ENTER button (2). :
(1) 1:FRONT 2:TOP 3:REAR (2) (Off) (On)
memo A sensor cannot be turned off when the other two are off.
Always at least one sensor is on.
OPTION
IR REMOTE
1:FRONT
2:TOP
3:REAR
ENT
IR REMOTE ID
Select a number as an ID number for remote control using the
/
buttons. :
ALL 1 2 3
The projector is controlled by the remote control whose ID CHANGE switch is
set into the position of the same number as this number. When the ALL is
selected, the projector is controlled by a remote control irrespective of the
position of the ID CHANGE switch.
memo Please refer to the section “Using The Remote ID Feature”.
LAMP TIME
Pressing the RESET button for about 3 seconds displays the LAMP TIME menu.
Select the RESET using
button to reset the timer. :
RESET CANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo Perform this function only when you have replaced the lamp. The lamp
timer counts the used time of the current lamp, to display the messages about
the lamp. Incorrect performing causes incorrect operation of the messages.
memo About replacing the lamp, please refer to the section” Lamp”.
FILTER TIME
Pressing the RESET button for about 3 seconds displays the FILTER TIME
menu.
Select the RESET using
button to reset the timer. :
RESET CANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo Perform this function only when you have cleaned or replaced the air
filter. The filter timer counts the used time of the air filter after cleaning or
replacement, to display the messages about the air filter. Incorrect performing
causes incorrect operation of the messages.
memo About caring for the air filter, please refer to the section “Air Filter”.
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
33
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ34
Multifunctional Settings (continued)
OPTION Menu (continued)
Item
Description
Pressing the
(or the ENTER) button calls the SERVICE
SERVICE
FANSPEED
menu.
AUTO ADJUST
LENS TYPE
SERVICE Menu
LENS LOCK
Select an item using the
/
buttons, and press the
: SELECT
(or the ENTER) button to per form each function. :
FANSPEED AUTO ADJUST LENS TYPE LENS LOCK
FANSPEED
Select the fan speed level using the
/
buttons. :
HIGH NORMAL
The HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo Note that the projector is noisier when the HIGH is
selected.
AUTO
ADJUST
Select the ENABLE or the DISABLE using the
/
buttons. :
ENABLE DISABLE
When you want to keep the current adjustment state, select
the DISABLE. When the ENABLE is selected, detecting a
signal change to a RGB signal performs the automatic
adjustment of the vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE) and the
horizontal size (H SIZE).
LENS TYPE
Select the lens type currently used using the
/
buttons. :
AUTO 1 2 3 4 5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo This setting has an influence on the keystone distortion
etc.
memo About the optional lens, ask your dealer.
LENS LOCK
Select the TURN ON or the TURN OFF using the
/
buttons. :
TURN ON TURN OFF
Selecting the TURN ON locks the adjustment of the lens shift,
the zoom and the focus.
SERVICE
RESET
NORMAL
ENABLE
AUTO
TURN OFF
Select the EXECUTE using the
button to reset the OPTION menu items. :
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial setting.
Note that the items “VOLUME”, “LAMP TIME” and “FILTER TIME” are not reset.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
34
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ35
Multifunctional Settings (continued)
NETWORK Menu
This projector provides the NETWORK function. If you use this
function, please set up the projector according to the Network
environment in which you use it.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
SETUP
DHCP
INFORMATION
RESET
TURN OFF
memo When you use a Network suitable to the DHCP function, the following
operation is not required commonly, because the TURN ON is selected to
the item “DHCP” at the shipment time. Please see the section “Network
Setting Up”.
Item
Description
NETWORK - SETUP
Pressing the
(or the ENTER) button calls the IP
IP ADRRESS
ADDRESS menu.
192 . 168 . 1 . 24
memo This item performs only when the TURN OFF
ESC
ENT :NEXT
:RETURN
is set to the item “DHCP” of this NETWORK menu.
The IP Address is identification number of the projector on the Network.
SETUP
1. Set the IP Address using the
/
buttons.
memo The same number as the IP Address of other units cannot be used.
Pressing the
(or the ENTER) button at the IP
NETWORK - SETUP
SUBNET MASK
ADDRESS menu calls the SUBNET MASK menu. The
255 . 255 . 255 . 1
SUBNET MASK is an address of the Network.
ESC
ENT :NEXT
:RETURN
2. Set the same number as the address of the Network to be used.
Pressing the
(or the ENTER) button at the
NETWORK - SETUP
DEFAULT GATEWAY
SUBNET MASK menu calls the DEFAULT GATEWAY
255 . 255 . 255 . 0
menu. The DEFAULT GATEWAY is the address of
ESC
ENT :NEXT
:RETURN
the main device.
3. Set the same number as the address of the device as gateway to an outer
Network.
DHCP
INFORMATION
RESET
NETWORK
Select the TURN ON or the TURN OFF using the
/
DHCP
buttons. :
TURN ON
TURN OFF
TURN ON TURN OFF
When you use a Network unsuitable to the DHCP function, select the TURN
OFF.
Pressing the
(or the ENTER) button displays the
INFORMATION menu.
The INFORMATION menu shows the information
about the current Network setting as illustrated
below.
NETWORK-INFORMATION
IP ADRRESS
192. 168. 1. 24
SUBNETMASK
255. 255. 255. 0
DEFAULT GATEWAY
255. 255. 255. 0
MAC ADRRESS
00. E0. 47. 03. 0C. D8
Select the EXECUTE using the
button to reset the NETWORK menu items. :
EXECUTE CANCEL
The items of the NETWORK menu are collectively returned to the initial setting.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
35
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ36
Network Setting Up
This projector provides the NETWORK function. If you use this function, please consult
your dealer for information.
To start, connect the NETWORK port to a gateway device via a RJ-45 (10BASE-1) cable,
then set up the projector according to the Network environment in which you use it.
When you use a Network unsuitable to the DHCP function
Please set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using
the NETWORK menu, referring to the section “NETWORK Menu”.
When you use a Network suitable to the DHCP function
or has been set up
You can set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using
a Web Browser of the computer connected to the Network. Although it needs a Web
Browser of Internet Explorer 4.0 or higher.
Input the same IP address as set to the projector, to the Web Browser of the computer
connected to LAN.
ex. Case of IP Address = 192.168.1.11
1) Input “http://192.168.1.11”.
2) Click “ENTER”.
3) Input the required data according to the screen.
4) Make sure of the input data, then click "Write".
memo These setting will be active after reboot. These
setting will be stored, and used when DHCP is OFF.
5) Click “Return to top page”.
6) Click “REBOOT” to complete this operation.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
36
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ37
Lamp
WARNING
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
The projector uses a high-pressure mercury glass lamp. The lamp can break with a
loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
Note that each lamp has a different lifetime, and some may burst or burn out soon after
you start using them. In addition, when the bulb bursts, it is possible for shards of
glass to fly into the lamp housing, and for gas containing mercury to escape from the
projector’s vent holes.
About disposal of a lamp • This product contains a mercury lamp; do not put in
trash. Dispose of in accord with environmental laws.
For lamp recycling, go to www.lamprecycle.org. (in USA)
For product disposal, contact your local government agency or www.eiae.org (in the
US) or www.epsc.ca (in Canada).
For more information, call your dealer.
Disconnect the
plug from the
power outlet
• If the lamp should break (it will make a loud bang when it does), unplug
the power cord from the outlet, and make sure to request a replacement
lamp from your local dealer. Note that shards of glass could damage the
projector’s internals, or cause injury during handling, so please do not try
to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does), ventilate
the room well, and make sure not to breathe the gas that comes out of
the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, make sure the power switch is off and the
power cable is not plugged in, then wait at least 45 minutes for the lamp
to cool sufficiently. Handling the lamp while hot can cause burns, as well
as damaging the lamp.
• Do not open the lamp cover while the projector is suspended from
above. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in high
places is dangerous, so ask your local dealer to have the lamp replaced
even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type DT00601.
• If the lamp breaks soon after the first time it is used, it is possible that
there are electrical problems elsewhere besides the lamp. If this
happens, contact your local dealer or a service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to
burst during use.
• If the indicators or a message prompts you to replace the lamp (see the
section “Related Messages” and “Regarding the indicator Lamps”),
replace the lamp as soon as possible. Using the lamp for long periods of
time, or past the replacement date, could cause it to burst. Do not use
old (used) lamps; this is a cause of breakage.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
37
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ38
Lamp (continued)
Replacing The Lamp
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon
as possible.
1
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2
Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number.
If the projector is mounted on the ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.
In the case of replacement by yourself,
TEMP
STANDBY/O
LAMP
N
MENU
INTER
RESET
INPUT
M1-D
FOCUS
ZOOM
SEARCH
KEYSTONE
PC
CO LAMP
TEMP
STANDBY/O
LAMP
N
VIDEO
S-VIDEO
Interlocking the 2 tabs of the lamp cover to the
projector, put the lamp cover on the projector. Then
push the point of the lamp cover to fix it, as shown in
the Figure. Make sure that the lamp cover does’t
come up.
VIDEO
6
RGB
Insert the new lamp, and tighten the 3 screws firmly
to lock it in place.
BNG
5
S-VIDEO
Unscrew the 3 screws, and slowly pull out the lamp
by the handle. Be careful not to touch the inside of Screws
the lamp case.
COMPONENT
4
Lamp cover
SHIFT
After making sure that the projector has cooled Lamp cover
adequately, slide the knob of a lamp cover lock as knob
shown in the Figure. Then, one side of the lamp
cover is raised. Pull up the lamp cover and remove
it, as shown in the Figure.
LENS
3
COMPONENT
MENU
INTER
LENS
SHIFT
BNG
RGB
M1-D
RESET
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
PC
CO LAMP
P
CO LAM
TEMP
STANDBY/O
LAMP
N
VIDEO
S-VIDEO
COMPONENT
INTER
SHIFT
MENU
BNG
RGB
M1-D
INPUT
RESET
FOCUS
SEARCH
KEYSTONE
ZOOM
Tabs
LENS
7
PC
PC
CO LAMP
Turn on the projector, and reset the lamp timer.
(1) While the projector running, press the MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the
button, then press the
/
button or ENTER button.
(3) Choose the “LAMP TIME” using the
button, then press and hold the
/
RESET button for 3 seconds.
(4) Choose the “RESET” using the
button.
memo When the lamp has been replaced after the message of "THE POWER WILL
TURN OFF AFTER 0hr." is displayed, complete the following operation within 10
minutes of switching power on.
memo Incorrectly resetting of the lamp timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
38
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ39
Air Filter
WARNING • Please carefully read the “User’s Manual - Safety Guide.
• Before caring, make sure the power switch is off and the power cable is not
plugged in, then wait at least 45 minutes for the lamp to cool sufficiently.
• Use only the air filter of the specified type NJ08081.
• Do not use the projector with the air filter and filter cover removed. The use without
the air filter could result in damage.
CAUTION • If the air filter becomes clogged by dust or the like, internal
temperature rises and could cause malfunction. The power is automatically turned
off in order to prevent the projector from overheating internally.
Caring For The Air Filter
The air filter should be cleaned about every 100 hours. If the indicators or a message
prompts you to clean the air filter, clean the air filter as soon as possible.
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be
replaced. Please replace the air filter as soon as possible.
memo When you replace the lamp, please replace also the air filter.
1
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2
After making sure that the projector has cooled adequately, remove the filter cover
and air filter.
3
Apply a vacuum cleaner to the top of the filter cover and
the air filter to clean.
If the soiling will not come off the air filter, or it becomes
damaged, it needs to be replaced.
If the air filter needs to be replaced, contact your dealer
to prepare a new air filter. Tell the dealer your air filter
type.
4
Insert the cleaned air filter or a new air filter, and replace
the filter cover.
5
Turn on the projector power, and reset the filter timer.
(1) While the projector running, press the MENU button to
open the menu.
(2) Choose the “OPTION” on the menu using the
/
button, then press the button or ENTER button.
(3) Choose the “FILTER TIME” using the
button, then
/
press and hold the RESET button for 3 seconds.
(4) Choose the “RESET” using the
button.
memo Incorrectly resetting of the filter timer (resetting
without replacement, or neglect of resetting after replacement) will result in
incorrect message functions.
Hold the release
buttons of the filter
cover while pulling
down it.
TEMP
LAMP
STANDBY/ON
VIDEO
MENU
BNG
COMPONENT
S-VIDEO
LENS SHIFT
INTER
RGB
RESET
M1-D
INPUT
FOCUS
ZOOM
SEARCH
KEYSTONE
Hold the release button
of the air filter while
pulling out it.
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
ZOOM
SEARCH
KEYSTONE
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
39
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ40
Other Care
WARNING • Please carefully read the “User’s Manual - Safety Guide”.
• Before caring, make sure the power switch is off and the power cable is not
plugged in.
• Be cautious of high temperature. Do not touch about the lens and ventilation
openings during use or immediately after use prevent a burn.
• Never try to care for the inside of the unit yourself. Doing so is dangerous.
CAUTION • Incorrect care could have adverse influence such as discoloration,
peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below, including benzene and
paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
Caring For The Inside Of The Projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years.
Caring For The Lens
1
Turn off the projector, and unplug the power cord.
2
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch
the lens directly with your hand.
Caring For The Cabinet And Remote Control
1
Turn off the projector, and unplug the power cord.
2
Wipe lightly with gauze or a soft cloth.
memo If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,
and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
40
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ41
Troubleshooting
Related Messages
When the unit's power is on, messages such as those shown below may be displayed.
When any such message is displayed on the screen, please respond as described below.
If the same message is displayed after the treatment, or if a message other than the
following appears, please contact your dealer or service company.
memo Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER ** hr.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER 0 hr.
Description
The time the lamp timer has counted is approaching
2000 hours.
Preparation of a new lamp, and an early lamp change is
recommended. After you have change the lamp, please be sure
to reset the lamp timer.
The time the lamp timer has counted is approaching
2000 hours, so a lamp change within ** hours is
recommended.
When lamp usage reaches 2000 hours, the power will
automatically be turned off.
Please change the lamp by referring to the section “Lamp”.
After you have changed the lamp, please be sure to reset the
lamp timer.
As the time the lamp timer has counted has reached
2000 hours, the power will soon be automatically
turned off.
Please immediately turn the power off, and change the lamp by
referring to the section “Lamp”. After changing the lamp, please
be sure to reset the lamp timer.
(This table is continued to the following page.)
NOTE • A lamp has a finite product life. Lamps are characterized by the fact that,
after long hours of usage, a lamp will no longer light up, or the lamp will break or burst,
etc. This projector is equipped with an automatic shut-down function, such that the
power will automatically be turned off when lamp usage time has reached 2000 hours.
Please be aware, however, that among lamp types, there are major differences in
product lifetimes; a lamp may thus fail to light even prior to the functioning of the
automatic shut-down function of this projector.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
41
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ42
Troubleshooting (continued)
Related Messages (continued)
Message
Description
CLEAN THE AIR FILTER
POWER OFF FIRST,
THEN CLEAN THE AIR FILTER.
AFTER CLEANING THE AIR
FILTER,
RESET THE FILTER TIMER.
The time the filter timer has counted has reached 100
hours.
Please clear or change the air filter by referring to the section
“Air Filter”. After caring for the air filter, please be sure to reset
the filter timer.
The internal portion temperature is rising.
CHECK THE AIR FLOW
NO INPUT IS DETECTED
ON ***
SYNC IS OUT OF RANGE
ON *** fH *****kHz fV *****Hz
Please turn the power OFF, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please make confirmation of the following items, and
then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
There is no input signal.
Please confirm the signal input connection, and the status of the
signal source.
The horizontal or vertical wavelength of the inputted
signal is outside of the response parameters of this
unit.
Please confirm the specs for this unit or the signal source
specs.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
42
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ43
Troubleshooting (continued)
Regarding The Indicator Lamps
Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP
indicator have the meanings as described in the table below. Please respond in
accordance with the instructions within the table. If the same indication is displayed after
the treatment, or if an indication other than the following is displayed, please contact your
dealer or service company.
NOTE • When the interior portion has become overheated, for safety purposes, the
power source is automatically turned off, and the indicator lamps may also be turned off.
In such a case, press the “○” (OFF) side of the main power switch, and wait at least 45
minutes. After the projector has sufficiently cooled down, please make confirmation of
the attachment state of the lamp and lamp cover, and then turn the power on again.
STANDBY/ON
LAMP
indicator
indicator
TEMP
indicator
Description
Lighting
in Orange
Turned
off
Turned
off
The projector is in a standby state.
Blinking
in Green
Turned
off
Turned
off
The projector is warming up.
Lighting
in Green
Turned
off
Turned
off
The projector is in an on state.
Blinking
in Orange
Turned
off
Turned
off
The projector is cooling down.
Blinking
in Red
(discretionary)
(discretionary)
Please refer to the section “Power On/Off”.
Please wait.
Ordinary operations may be performed.
Please wait.
The projector is cooling down. A certain error has
been detected.
Please wait until the STANDBY/ON indicator finishes blink,
and then perform the proper response measure using the
item descriptions below as reference.
The lamp does not light, and there is a possibility
that interior portion has become heated.
Lighting
in Red
Lighting
in Red
Turned
off
Please turn the power off, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please make confirmation of the following items, and
then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treatment,
please change the lamp by referring to the section “Lamp”.
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
43
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ44
Troubleshooting (continued)
Regarding The Indicator Lamps (continued)
STANDBY/ON
LAMP
indicator
indicator
TEMP
indicator
Description
Either there is no lamp and/or lamp cover, or
either of these has not been properly fixed.
Lighting
in Red
Blinking
in Red
Turned
off
Please turn the power off, and allow the unit to cool down at
least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of
the lamp and lamp cover, and then turn the power on again.
If the same indication is displayed after the treatment,
please contact your dealer or service company.
The cooling fan is not operating.
Lighting
in Red
Turned
off
Blinking
in Red
Please turn the power off, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please make confirmation that no foreign matter has
become caught in the fan, etc., and then turn the power on
again.
If the same indication is displayed after the treatment,
please contact your dealer or service company.
There is a possibility that the interior portion has
become heated.
Lighting
in Red
Lighting
in Green
Turned
off
Lighting
in Red
Alternative
Blinking in Red
Please turn the power off, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please make confirmation of the following items, and
then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treatment,
please change the lamp by referring to the section “Lamp”.
There is a possibility that the interior portion has
become overcooled.
Please use the unit within the usage temperature
parameters (0°C to 35°C). After the treatment, resent the
power to ON.
It is time to clean the air filter, or there is no air
filter.
Lighting
in Green
Simultaneous
Blinking in Red
Please immediately turn the power OFF, and clean or
change the air filter by referring to the section “Air Filter”.
After cleaning or changed the lamp, please be sure to reset
the filter timer. After the treatment, resent the power to ON.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
44
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ45
Troubleshooting (continued)
Phenomena That May Easily Be Mistaken For Machine Defects
WARNING • Never use the projector if abnormal operations such as smoke,
strange odor, excessive sound, damaged casing or elements or cables,
penetration of liquids or foreign matter, etc. should occur. In such cases, immediately
turn off the power switch and then disconnect the power plug from the power outlet
After making sure that the smoke or odor has stopped, contact your dealer or service
company.
Before requesting repair, please check in accordance with the following chart. If the
situation cannot be corrected, please contact your dealer or service company.
NOTE • Although bright spots or dark spots may appear on the screen, this is a
unique characteristic of liquid crystal displays, and such do not constitute or imply a
machine defect.
Phenomenon
Power does not
come on.
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
11
The power switch is not set to the on position.
Set the power switch to [ | ] (On).
15
The main power source has been interrupted during operation
such as by a power outage (blackout), etc.
Please turn the power off, and allow the unit to cool down at least 20
minutes. After the projector has sufficiently cooled down, please turn
the power on again.
15
Either there is no lamp and/or lamp cover, or either of these has
not been properly fixed.
Please turn the power off, and allow the unit to cool down at least 45
minutes. After the projector has sufficiently cooled down, please
make confirmation of the attachment state of the lamp and lamp
cover, and then turn the power on again.
35, 36
The signal cables are not correctly connected.
Correctly connect the connection cables.
Neither sounds
nor pictures are
outputted.
Reference
pages
Signal source does not correctly work.
Correctly set up the signal source device by referring to the manual
of the source device.
The input changeover settings are mismatched.
Select the input signal, and correct the settings.
8, 9
-
16
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
45
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ46
Troubleshooting (continued)
Phenomena That May Easily Be Mistaken For Machine Defects (continued)
Phenomenon
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the connection cables.
Pictures are
displayed,
but no sounds
are heard.
Sounds are
heard,
but no pictures
are displayed.
Colors have a
faded- out
appearance, or
Color tone is poor.
Pictures appear
dark.
The volume is adjusted to an extremely low level.
Adjust the VOLUME to a higher level.
Input signal
changes with no
operation.
8, 9
19, 32
The sound is muted.
Press the MUTE button to restore the sound.
19
The audio input is not correctly selected when the child window
is displayed.
Correctly select the audio input.
22
The lens cap is attached.
Remove the lens cap.
4, 15
The signal cables are not correctly connected.
Correctly connect the connection cables.
8, 9
The brightness is adjusted to an extremely low level.
Adjust the BRIGHT to a higher level using the menu function.
23
The screen is blanked.
Press the BLANK button to return to the input signal screen.
19
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR BAL R,
COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings, using
the menu functions.
24
The brightness and/or contrast are adjusted to an extremely low
level.
Adjust the BRIGHT and/or CONTRAST settings to a higher level
using the menu function.
23
The WHISPER function is working.
Select the NORMAL to the item WHISPER in the MAIN menu.
23
The lamp is approaching the end of its product lifetime.
Replace the lamp.
Pictures appear
blurry.
Reference
pages
35, 36
Either the focus and/or horizontal phase settings are not
properly.
Adjust the focus using the focus buttons, and/or H PHASE using the
menu function.
16
The lens is dirty or misty.
Clean the lens by referring to the section “Caring For The Lens”.
38
The INPUT dial is set between the click points.
Turn the INPUT dial and set it at a click point.
16
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
46
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ47
Warranty And After-Service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specifications
NOTE • This specifications are subject to change without notice.
Item
Product name
Liquid
crystal
panel
Specification
Liquid crystal projector
Panel size
2.5 cm (0.99 type)
Drive system
TFT active matrix
Pixels
786,432 pixels (1024 horizontal x 768 vertical)
Lens
Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm
Lamp
310W UHB
Speaker
1.0W + 1.0W (Stereo)
Power supply
AC100 ~ 120V, 5.2A / AC220 ~ 240V, 2.2A
Power consumption
470W
Temperature range
0 ~ 35°C (Operating)
Size
420 (W) x 150 (H) x 310 (D) mm (Not including protruding parts)
• Please refer to the figure of the section “TECHNICAL” of the
end of this manual.
Weight (mass)
7.7 kg
RGB input ports
RGB
M1-D
BNC (R, G, B, H, V)
Video input ports
VIDEO IN
S-VIDEO
COMPONENT
(CR/PR, CB/PB, Y)
Ports
Audio input ports
AUDIO IN 1
AUDIO IN 2
AUDIO IN R/L
Optional
Parts
Lamp
DT00601
Air filter
NJ08081
Others
• Please consult your dealer.
RGB output port
RGB OUT
Audio output port
AUDIO OUT
Control port
CONTROL
Other ports
NETWORK
REMOTE CONTROL
DC OUT
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
47
01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ48
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ1
Projector
CP-X1200W/CP-X1250W
TEMP
LAMP
STANDBY/ON
VIDEO
BNG
COMPONENT
S-VIDEO
LENS SHIFT
MENU
INTER
RGB
M1-D
INPUT
RESET
FOCUS
User's Manual - Operating Guide
ZOOM
SEARCH
KEYSTONE
TECHNICAL
Dimensions
320
[unit: mm]
210
160
73
85.5 (Lens shift 1:1) to 92.99 (Lens shift 10:0)
10:0
1:1
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
1
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ2
Example Of Computer Signal
Resolution
H×V
fH (kHz)
fV (Hz)
Rating
Signal mode
Display mode
720 × 400
37.9
85.0
VESA
TEXT
Zoom in
640 × 480
31.5
59.9
VESA
630 × 480
35.0
66.7
640 × 480
37.9
72.8
640 × 480
37.5
640 × 480
43.3
800 × 600
VGA (60Hz)
Zoom in
Mac13"mode
Zoom in
VESA
VGA (72Hz)
Zoom in
75.0
VESA
VGA (75Hz)
Zoom in
85.0
VESA
VGA (75Hz)
Zoom in
35.2
56.3
VESA
SVGA (56Hz)
Zoom in
800 × 600
37.9
60.3
VESA
SVGA (60Hz)
Zoom in
800 × 600
48.1
72.2
VESA
SVGA (72Hz)
Zoom in
800 × 600
46.9
75.0
VESA
SVGA (75Hz)
Zoom in
800 × 600
53.7
85.1
VESA
SVGA (85Hz)
Zoom in
832 × 624
49.7
74.5
Mac16"mode
Zoom in
1024 × 768
48.4
60.0
VESA
XGA (60Hz)
1024 × 768
56.5
70.1
VESA
XGA (70Hz)
1024 × 768
60.0
75.0
VESA
XGA (75Hz)
1024 × 768
68.7
85.0
VESA
XGA (85Hz)
1152 × 864
67.5
75.0
VESA
SXGA (75Hz)
Zoom out
1280 × 960
60.0
60.0
VESA
SXGA (60Hz)
Zoom out
1280 × 1025
64.0
60.0
VESA
SXGA (60Hz)
Zoom out
1280 × 1024
80.0
75.0
VESA
SXGA (75Hz)
Zoom out
1280 × 1024
91.2
85.0
VESA
SXGA (85Hz)
Zoom out
1600 × 1200
75.0
60.0
VESA
UXGA (60Hz)
Zoom out
NOTE • Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a computer.
• Some computers may hove multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600 x 1200),
the signal will be converted to the projector’s panel resolution before being
displayed. The best display performance will be achieved if the resolutions of the
input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync. signal is a composite
sync. or a sync. on G.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
2
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ3
Initial Set Signals
The following signals are used for the initial settings. The signal timing of some computer
models may be different. In such case, adjust the items V POSITION and H POSITION in
the PICTURE-2 menu.
Back porch b
Front porch d
Display interval c
Back porch b
Front porch d
Display interval c
DATA
DATA
H. Sync.
V. Sync.
Sync. a
Computer /
Signal
Sync. a
Horizontal signal timing (µs)
TEXT
a
2.0
b
3.0
c
20.3
d
1.0
VGA (60Hz)
3.8
1.9
25.4
Mac 13"mode
2.1
3.2
VGA (72Hz)
1.3
3.8
VGA (75Hz)
2.0
VGA (75Hz)
Computer /
Signal
Vertical signal timimg (lines)
TEXT
a
3
b
42
c
400
d
1
0.6
VGA (60Hz)
2
33
480
10
21.2
2.1
Mac 13"mode
3
39
480
3
20.3
1.0
VGA (72Hz)
3
28
480
9
3.8
20.3
0.5
VGA (75Hz)
3
16
480
1
1.6
2.2
17.8
1.6
VGA (75Hz)
3
25
480
1
SVGA (56Hz)
2.0
3.6
22.2
0.7
SVGA (56Hz)
2
22
600
1
SVGA (60Hz)
3.2
2.2
20.0
1.0
SVGA (60Hz)
4
23
600
1
SVGA (72Hz)
2.4
1.3
16.0
1.1
SVGA (72Hz)
6
23
600
37
SVGA (75Hz)
1.6
3.2
16.2
0.3
SVGA (75Hz)
3
21
600
1
SVGA (85Hz)
1.1
2.7
14.2
0.6
SVGA (85Hz)
3
27
600
1
Mac 16"mode
1.1
3.9
14.5
0.6
Mac 16"mode
3
39
624
1
XGA (60Hz)
2.1
2.5
15.8
0.4
XGA (60Hz)
6
29
768
3
XGA (70Hz)
1.8
1.9
13.7
0.3
XGA (70Hz)
6
29
768
3
XGA (75Hz)
1.2
2.2
13.0
0.2
XGA (75Hz)
3
28
768
1
XGA (85Hz)
1.0
2.2
10.8
0.5
XGA (85Hz)
3
36
768
1
1152×864 (75Hz)
1.2
2.4
10.7
0.6
1152×864 (75Hz)
3
32
864
1
1280×960 (60Hz)
1.0
2.9
11.9
0.9
1280×960 (60Hz)
3
36
960
1
1280×1024 (60Hz)
1.0
2.3
11.9
0.4
1280×1024 (60Hz)
3
38
1024
1
1280×1024 (75Hz)
1.1
1.8
9.5
0.2
1280×1024 (75Hz)
3
37
1024
2
1280×1024 (85Hz)
1.0
1.4
8.1
0.4
1280×1024 (85Hz)
3
44
1024
1
1600×1200 (60Hz)
1.2
1.9
9.9
0.4
1600×1200 (60Hz)
3
46
1200
1
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
3
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ4
Connection To The Ports
B
D
M
AUDIO IN2
E
CONTROL
NETWORK
REMOTE CONTROL
AUDIO IN1
RGB
R/CR/PR
G/Y
B/CB/PB
A
AUDIO OUT
RGB OUT
H
CR/PR Ca/Pa
R-AUDIO IN-L
C
BNC
Y
V
VIDEO
S-VIDEO
H
A RGB
• Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω
terminator (positive)
• H./V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
5 4 3 2 1
0 9 8 7 6
e w q = -
D-Sub 15 pin shrink jack
Pin
1
2
3
4
5
Signal
Video input Red
Video input Green
Video input Blue
Ground
Pin
6
7
8
9
0
Signal
Ground Red
Ground Green
Ground Blue
Ground
Pin
=
q
w
e
Signal
SDA (DDC)
H./Composite sync.
V. sync.
SCL (DDC)
B M1-D
• Type: T.M.D.S.
• Amplitude differential: DC 150-1200 mV / AC 1.56 Vp-p
• Amplitude: TTL level (positive/negative)
gfdsa\][po
iuytrewq=0987654321
M1-D jack
Pin
1
2
3
4
5
6
7
8
9
0
Signal
T.M.D.S. Data2 +
T.M.D.S. Data2 T.M.D.S. Data2 Return
T.M.D.S. Clock Return
V. Sync.
Hot Plug Detect
(+5V DC Output)
-
Pin
=
q
w
e
r
t
Signal
T.M.D.S. Data1 +
T.M/D.S. Data1 T.M.D.S. Data1 Return
T.M.D.S. Clock +
T.M.D.S. Clock USB Date +
USB Date -
Pin
o
p
[
]
\
a
s
Signal
T.M.D.S. Data0 +
T.M.D.S. Data0 T.M.D.S. Data0 Return
USB +5V DC Input
DDC & USB Return
DDC Date (SDA)
DDC Clock (SCL)
y
-
d
DDC +5V DC Input
u
i
-
f
g
-
C BNC (R,G,B,H,V)
• BNC jack x5
• Video: Analog 0.7 Vp-p, 75 Ω terminator
• H/V. sync. : TTL level (positive/negative)
• Composite sync. : TTL level
D AUDIO IN 1, E AUDIO IN 2, H AUDIO IN R, L, M AUDIO OUT
• 3.5 dia. Stereo mini jack
• 200 mVrms, 57k Ω terminator
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
4
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ5
Connection To The Ports (continued)
O
L N
CONTROL
NETWORK
REMOTE CONTROL
AUDIO IN1
AUDIO OUT
AUDIO IN2
RGB OUT
RGB
R/CR/PR
G/Y
B/CB/PB
H
CR/PR Ca/Pa
K
Y
V
R-AUDIO IN-L
BNC
VIDEO
I J
S-VIDEO
I VIDEO IN
• RCA jack
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60
• 1.0 ± 0.1 Vp-p at 75 Ω terminator
J S-VIDEO
Pin
Signal
Color signal: 0.286 Vp-p (NTSC, burst), 75 Ω terminator
Color signal: 0.300 Vp-p (PAL/SECAM, burst), 75 Ω terminator
Brightness signal: 1.0 Vp-p, 75 Ω terminator
Ground
Ground
1
1 2
3 4
2
3
4
Mini Din 4 pin jack
K COMPONENT (CR/PR, CB/PB, Y)
• RCA jack x3
• System: 525i (480i), 525p (480p), 625i (575i), 720p, 1080i/1035i
• Y signal: 1.0 ± 0.1 Vp-p at 75 Ω terminated with composite sync.
• CB/PB signal: 0.7 ± 0.1 Vp-p at 75 Ω terminated
• CR/PR signal: 0.7 ± 0.1 Vp-p at 75 Ω terminated
L RGB OUT
• Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω
terminator (positive)
• H./V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
5 4 3 2 1
0 9 8 7 6
e w q = -
D-Sub 15 pin shrink jack
Pin
1
2
3
4
5
Signal
Video input Red
Video input Green
Video input Blue
Ground
Pin
6
7
8
9
0
Signal
Ground Red
Ground Green
Ground Blue
Ground
Pin
=
q
w
e
Signal
H./Composite sync.
V. sync.
-
N REMOTE CONTROL
• 3.5 dia. Stereo mini jack
• To be connected with the remote control that came with the projector.
O DC OUT
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
5
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ6
Connection To The Ports (continued)
F
G
CONTROL
REMOTE CONTROL
AUDIO IN1
AUDIO OUT
AUDIO IN2
R/CR/PR
NETWORK
RGB OUT
RGB
G/Y
B/CB/PB
H
CR/PR Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
BNC
F RGB OUT
Computer side
CONTROL port
1 2 3 4 5
6 7 8 9
D-Sub 9 pin
plug
-
5 4 3 2 1
9 8 7 6
D-Sub 9 pin
jack
RD
TD
GND
RTS
CTS
-
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
RS-232C port
5 4 3 2 1
9 8 7 6
D-Sub 9 pin
jack
1 2 3 4 5
6 7 8 9
D-Sub 9 pin
plug
memo About the details of RS-232C communication, please refer to the
following page.
G NETWORK
• RJ-45 (10BASE-T) jack
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
6
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ7
RS-232CCommunication
Connecting The Cable
1
Turn off the projector and the computer power supplies.
2
Connect the CONTROL port of the projector with a RS-232C port of the computer by
a RS-232C cable. Use the cable that fulfills the specification shown in the previous
page.
3
Turn on the computer power supply and after the computer has started up, turn on
the projector power supply.
Communications Setting
19200bps, 8N1
1. Protocol
Consist of header (7 bytes) + command data (6 bytes).
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data
CRC_high : Upper byte of CRC flag for command data
3. Command data
Command Data Chart
byte_0
byte_1
byte_2
Action
low
byte_3
byte_4
high
low
Type
high
low
byte_5
Setting code
high
Action (byte_0 - 1)
Action
Classification
Content
1
SET
Change setting to desired value.
2
GET
Read projector internal setup value.
4
INCREMENT
Increment setup value by 1.
5
DECREMENT
Decrement setup value by 1.
6
EXECUTE
Run a command.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
7
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ8
RS-232CCommunication (continued)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2
bytes)+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +
setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+
type (2 bytes) +‘00H’ + ‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When the projector cannot understand the received command
When the projector cannot understand the received command, the error code ‘15H’ is
sent back to the computer.
Sometimes the projector cannot properly receive the command. In such a case, the
command is not executed and the error code ‘15H’ is sent back to the computer. If this
error code is returned, send the same command again.
When the projector cannot execute the received command.
When the projector cannot execute the received command, the error code ‘1cH’ +
‘xxxxH’ is sent back to the computer. When the data length is greater than indicated by
the data length code, the projector ignore the excess data code.
Conversely when the data length is shorter than indicated by the data length code, an
error code will be returned to the computer.
NOTE • Operation cannot be guaranteed when the projector receives an
undefined command or data.
• Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the
lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
8
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ9
RS-232CCommunication (continued)
Command Data Chart
Names
Operation type
Command data
Header
Type
Setting code
Get
BE EF
03
06 00
B9 D3
02 00
07 20
00 00
Keystone V
Increment
Decrement
BE EF
BE EF
03
03
06 00
06 00
DF D3
0E D2
04 00
05 00
07 20
07 20
00 00
00 00
Keystone V Reset
Execute
BE EF
03
06 00
08 D0
06 00
0C 70
00 00
Get
BE EF
03
06 00
E9 D0
02 00
0B 20
00 00
Increment
BE EF
03
06 00
8F D0
04 00
0B 20
00 00
Decrement
BE EF
03
06 00
5E D1
05 00
0B 20
00 00
Execute
BE EF
03
06 00
98 D8
06 00
20 70
00 00
Get
BE EF
03
06 00
89 D2
02 00
03 20
00 00
Increment
BE EF
03
06 00
EF D2
04 00
03 20
00 00
Decrement
BE EF
03
06 00
3E D3
05 00
03 20
00 00
Execute
BE EF
03
06 00
58 D3
06 00
00 70
00 00
Get
BE EF
03
06 00
FD D3
02 00
04 20
00 00
Increment
BE EF
03
06 00
9B D3
04 00
04 20
00 00
Decrement
BE EF
03
06 00
4A D2
05 00
04 20
00 00
Execute
BE EF
03
06 00
A4 D2
06 00
01 70
00 00
4:3
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
9E D0
0E D1
FE D1
5E DD
AD D0
3B 23
AB 22
08 23
C7 D2
57 D3
A7 D3
37 D2
01 00
01 00
01 00
01 00
02 00
01 00
01 00
02 00
01 00
01 00
01 00
01 00
08 20
08 20
08 20
08 20
08 20
00 33
00 33
00 33
01 30
01 30
01 30
01 30
00 00
01 00
02 00
10 00
00 00
00 00
01 00
00 00
00 00
01 00
02 00
03 00
BE EF
03
06 00
F4 D2
02 00
01 30
00 00
Keystone H
Keystone H Reset
Brightness
Brightness Reset
Contrast
Contrast Reset
Aspect
Set
16:9
SMALL
NORMAL
Get
Whisper
Set
NORMAL
WHISPER
Get
Normal
Set
Mirror
H Inverse
V lnverse
H&V Inverse
Get
CRC
Action
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
9
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ10
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Language
Operation type
Set
Type
Setting code
ENGLISH
BE EF
03
06 00
F7 D3
01 00
05 30
00 00
FRANÇAIS
BE EF
03
06 00
67 D2
01 00
05 30
01 00
DEUTSCH
BE EF
03
06 00
97 D2
01 00
05 30
02 00
ESPAÑOL
BE EF
03
06 00
07 D3
01 00
05 30
03 00
ITALIANO
BE EF
03
06 00
37 D1
01 00
05 30
04 00
NORSK
BE EF
03
06 00
A7 D0
01 00
05 30
05 00
NEDERLANDS
PORTUGUÊS
BE EF
03
06 00
57 D0
01 00
05 30
06 00
BE EF
03
06 00
C7 D1
01 00
05 30
07 00
日本語
BE EF
03
06 00
37 D4
01 00
05 30
08 00
中文
BE EF
03
06 00
A7 D5
01 00
05 30
09 00
BE EF
03
06 00
57 D5
01 00
05 30
0A 00
BE EF
03
06 00
C7 D4
01 00
05 30
0B 00
BE EF
03
06 00
F7 D6
01 00
05 30
0C 00
SVENSKA
Gamma
Set
Custom Gamma
Custom
Color Temp
Set
Set
Set
Action
SUOMI
BE EF
03
06 00
67 D7
01 00
05 30
0D 00
BE EF
03
06 00
97 D7
01 00
05 30
0E 00
Get
BE EF
03
06 00
C4 D3
02 00
05 30
00 00
NORMAL
BE EF
03
06 00
C7 F0
01 00
A1 30
00 00
CINEMA
BE EF
03
06 00
57 F1
01 00
A1 30
01 00
DYNAMIC
BE EF
03
06 00
A7 F1
01 00
A1 30
02 00
CUSTOM
BE EF
03
06 00
07 FD
01 00
A1 30
10 00
Get
BE EF
03
06 00
F4 F0
02 00
A1 30
00 00
Get
BE EF
03
06 00
08 F1
02 00
A0 30
00 00
Increment
BE EF
03
06 00
6E F1
04 00
A0 30
00 00
Decrement
BE EF
03
06 00
BF F0
05 00
A0 30
00 00
USER
BE EF
03
06 00
3B F8
01 00
B0 30
10 00
HIGH
MIDDLE
BE EF
BE EF
03
03
06 00
06 00
0B F5
9B F4
01 00
01 00
B0 30
B0 30
03 00
02 00
LOW
BE EF
03
06 00
6B F4
01 00
B0 30
01 00
BE EF
03
06 00
C8 F5
02 00
B0 30
00 00
50
BE EF
03
06 00
57 F7
01 00
B1 30
05 00
60
BE EF
03
06 00
C7 F6
01 00
B1 30
04 00
70
80
90
100
BE EF
BE EF
BE EF
BE EF
03
03
03
03
06 00
06 00
06 00
06 00
F7 F4
67 F5
97 F5
07 F4
01 00
01 00
01 00
01 00
B1 30
B1 30
B1 30
B1 30
03 00
02 00
01 00
00 00
Get
Custom User G
CRC
POLSKI
Get
Custom User R
Command data
Header
BE EF
03
06 00
34 F4
02 00
B1 30
00 00
50
BE EF
03
06 00
13 F7
01 00
B2 30
05 00
60
BE EF
03
06 00
83 F6
01 00
B2 30
04 00
70
BE EF
03
06 00
B3 F4
01 00
B2 30
03 00
80
BE EF
03
06 00
23 F5
01 00
B2 30
02 00
90
BE EF
03
06 00
D3 F5
01 00
B2 30
01 00
100
BE EF
03
06 00
43 F4
01 00
B2 30
00 00
BE EF
03
06 00
70 F4
02 00
B2 30
00 00
Get
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
10
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ11
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Operation type
Command data
Header
Type
Setting code
50
BE EF
03
06 00
EF F6
01 00
B3 30
05 00
60
BE EF
03
06 00
7F F7
01 00
B3 30
04 00
70
BE EF
03
06 00
4F F5
01 00
B3 30
03 00
80
BE EF
03
06 00
DF F4
01 00
B3 30
02 00
90
BE EF
03
06 00
2F F4
01 00
B3 30
01 00
100
BE EF
03
06 00
BF F5
01 00
B3 30
00 00
Get
BE EF
03
06 00
8C F5
02 00
B3 30
00 00
Get
BE EF
03
06 00
01 D2
02 00
05 20
00 00
Increment
BE EF
03
06 00
67 D2
04 00
05 20
00 00
Decrement
BE EF
03
06 00
B6 D3
05 00
05 20
00 00
Color Balance R
Reset
Execute
BE EF
03
06 00
94 D3
06 00
05 70
00 00
Get
BE EF
03
06 00
B5 D7
02 00
12 20
00 00
Color Balance G
Increment
BE EF
03
06 00
D3 D7
04 00
12 20
00 00
Decrement
BE EF
03
06 00
02 D6
05 00
12 20
00 00
Color Balance G
Reset
Execute
BE EF
03
06 00
04 DB
06 00
29 70
00 00
Get
BE EF
03
06 00
45 D2
02 00
06 20
00 00
Color Balance B
Increment
BE EF
03
06 00
23 D2
04 00
06 20
00 00
Decrement
BE EF
03
06 00
F2 D3
05 00
06 20
00 00
Color Balance B
Reset
Execute
BE EF
03
06 00
D0 D3
06 00
06 70
00 00
Get
BE EF
03
06 00
F1 72
02 00
01 22
00 00
Sharpness
Increment
BE EF
03
06 00
97 72
04 00
01 22
00 00
Decrement
BE EF
03
06 00
46 73
05 00
01 22
00 00
Execute
BE EF
03
06 00
C4 D0
06 00
09 70
00 00
Get
BE EF
03
06 00
B5 72
02 00
02 22
00 00
Color
Increment
BE EF
03
06 00
D3 72
04 00
02 22
00 00
Color Reset
Decrement
Execute
BE EF
BE EF
03
03
06 00
06 00
02 73
80 D0
05 00
06 00
02 22
0A 70
00 00
00 00
Get
BE EF
03
06 00
49 73
02 00
03 22
00 00
Custom User B
Set
Color Balance R
Sharpness Reset
Tint
Tint Reset
My Memory Load Set
My Memory Save Set
CRC
Action
Increment
BE EF
03
06 00
2F 73
04 00
03 22
00 00
Decrement
BE EF
03
06 00
FE 72
05 00
03 22
00 00
Execute
BE EF
03
06 00
7C D1
06 00
0B 70
00 00
1
2
3
4
1
2
3
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
0E D7
9E D6
6E D6
FE D7
F2 D6
62 D7
92 D7
01 00
01 00
01 00
01 00
01 00
01 00
01 00
14 20
14 20
14 20
14 20
15 20
15 20
15 20
00 00
01 00
02 00
03 00
00 00
01 00
02 00
4
BE EF
03
06 00
02 D6
01 00
15 20
03 00
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
11
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ12
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Operation type
Get
V Position
Increment
Decrement
V Position Reset
Execute
Get
H Position
Increment
Decrement
H Position Reset
Execute
Get
H Phase
Increment
Decrement
Get
H Size
Increment
Decrement
H Size Reset
Execute
Get
Over Scan
Increment
Decrement
Over Scan Reset
Execute
AUTO
RGB
Set
SMPTE240
Color Space
REC709
REC601
Get
COMPONENT
Set
Component
SCART RGB
Get
AUTO
NTSC
PAL
SECAM
Set
Video Format
NTSC 4.43
M-PAL
Frame Lock
3D-YCS
Set
Set
Command data
Header
CRC
Action
Type
Setting code
0D 83
6B 83
BA 82
E0 D2
F1 82
97 82
46 83
1C D3
49 83
2F 83
FE 82
B5 82
D3 82
02 83
68 D2
91 70
F7 70
26 71
EC D9
0E 72
9E 73
6E 73
FE 72
CE 70
3D 72
4A D7
DA D6
79 D7
9E 75
FE 71
6E 70
6E 75
5E 72
FE 74
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
02 00
04 00
05 00
06 00
02 00
04 00
05 00
06 00
01 00
01 00
01 00
01 00
01 00
02 00
01 00
01 00
02 00
01 00
01 00
01 00
01 00
01 00
01 00
00 21
00 21
00 21
02 70
01 21
01 21
01 21
03 70
03 21
03 21
03 21
02 21
02 21
02 21
04 70
09 22
09 22
09 22
27 70
04 22
04 22
04 22
04 22
04 22
04 22
17 20
17 20
17 20
00 22
00 22
00 22
00 22
00 22
00 22
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
02 00
03 00
04 00
00 00
00 00
01 00
00 00
0A 00
04 00
05 00
09 00
02 00
08 00
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
N-PAL
BE EF
03
06 00
0E 71
01 00
00 22
07 00
Get
TURN OFF
TURN ON
Get
TURN OFF
NORMAL
STILL IMAGE
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
D5 70
E6 70
76 71
F8 D6
E6 70
76 71
86 71
02 00
01 00
01 00
02 00
01 00
01 00
01 00
0A 22
0A 22
0A 22
14 30
0A 22
0A 22
0A 22
00 00
00 00
01 00
00 00
00 00
01 00
02 00
BE EF
03
06 00
D5 70
02 00
0A 22
00 00
Get
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
12
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ13
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Video NR
S2-Aspect
Auto Adjust
Auto off
Auto Search
Blank Color
Blank on/off
Startup
Operation type
Command data
Header
Type
Setting code
LOW
Set
MIDDLE
HIGH
Get
TURN OFF
Set
TURN ON
Get
Execute
Get
Increment
Decrement
TURN OFF
Set
TURN ON
Get
My Screen
Original
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
26 72
D6 72
46 73
85 73
1A 71
8A 70
29 71
91 D0
08 86
6E 86
BF 87
B6 D6
26 D7
85 D6
FB CA
FB E2
01 00
01 00
01 00
02 00
01 00
01 00
01 00
06 00
02 00
04 00
05 00
01 00
01 00
02 00
01 00
01 00
06 22
06 22
06 22
06 22
0B 22
0B 22
0B 22
0A 20
10 31
10 31
10 31
16 20
16 20
16 20
00 30
00 30
01 00
02 00
03 00
00 00
00 00
01 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
20 00
40 00
Set
Set
Set
Action
Blue
BE EF
03
06 00
CB D3
01 00
00 30
03 00
White
Black
Get
TURN OFF
TURN ON
Get
My Screen
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
6B D0
9B D0
08 D3
FB D8
6B D9
C8 D8
CB CB
01 00
01 00
02 00
01 00
01 00
02 00
01 00
00 30
00 30
00 30
20 30
20 30
20 30
04 30
05 00
06 00
00 00
00 00
01 00
00 00
20 00
Original
BE EF
03
06 00
0B D2
01 00
04 30
00 00
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
9B D3
38 D2
40 D7
26 D7
F7 D6
01 00
02 00
02 00
04 00
05 00
04 30
04 30
16 30
16 30
16 30
01 00
00 00
00 00
00 00
00 00
TURN OFF
Get
Get
Increment
Decrement
Menu Position V
CRC
Menu Position V
Reset
Execute
BE EF
03
06 00
A8 C7
06 00
44 70
00 00
Menu Position H
Get
Increment
Decrement
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
04 D7
62 D7
B3 D6
02 00
04 00
05 00
15 30
15 30
15 30
00 00
00 00
00 00
Menu Position H
Reset
Execute
BE EF
03
06 00
DC C6
06 00
43 70
00 00
BE EF
BE EF
03
03
06 00
06 00
8F D6
1F D7
01 00
01 00
17 30
17 30
00 00
01 00
BE EF
03
06 00
BC D6
02 00
17 30
00 00
Message
Set
TURN OFF
TURN ON
Get
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
13
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ14
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Operation type
Get
Volume
Increment
Decrement
TURN ON
Set
Mute
TURN OFF
Get
Lamp Time
Get
Lamp Time Reset
Execute
Filter Time
Get
Filter Time Reset
Execute
Get
Magnify
Increment
Decrement
Normal
Set
Freeze
Freeze
Get
TURN OFF
Set
TURN ON
Command data
Header
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
06 00
CRC
Action
Type
Setting code
31 D3
57 D3
86 D2
46 D3
D6 D2
75 D3
C2 FF
58 DC
C2 F0
98 C6
7C D2
1A D2
CB D3
83 D2
13 D3
B0 D2
2A D3
BA D2
19 D3
02 00
04 00
05 00
01 00
01 00
02 00
02 00
06 00
02 00
06 00
02 00
04 00
05 00
01 00
01 00
02 00
01 00
01 00
02 00
01 20
01 20
01 20
02 20
02 20
02 20
90 10
30 70
A0 10
40 70
07 30
07 30
07 30
02 30
02 30
02 30
00 60
00 60
00 60
00 00
00 00
00 00
00 00
01 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
00 00
01 00
00 00
Power
Get
Input Source
Set
01 00
(On)
02 00
(Cool down)
M1-D
BE EF
03
06 00
0E D2
01 00
00 20
03 00
RGB
BE EF
03
06 00
FE D2
01 00
00 20
00 00
BNC
Video
S-Video
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
3E D0
6E D3
9E D3
01 00
01 00
01 00
00 20
00 20
00 20
04 00
01 00
02 00
Component
BE EF
03
06 00
AE D1
01 00
00 20
05 00
BE EF
BE EF
03
03
06 00
06 00
CD D2
D9 D8
02 00
02 00
00 20
20 60
00 00
00 00
Get
Error Status
(Example Return)
00 00
(Off)
Get
(Example of Return)
00 00
01 00
(Normal)
(Cover-error)
04 00
05 00
(Temp-error) (Air flowerror)
02 00
(Fan-error)
06 00
(LampTime-over)
03 00
(Lamp-error)
07 00
08 00
(Cool-error)
(Filter-Error)
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
14
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ15
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Operation type
Type
Setting code
BE EF
03
06 00
FE 22
01 00
00 23
00 00
Large
Small
Get
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
6E 23
9E 23
CD 22
01 00
01 00
02 00
00 23
00 23
00 23
01 00
02 00
00 00
Upper Left
BE EF
03
06 00
02 23
01 00
01 23
00 00
Upper Right
BE EF
03
06 00
92 22
01 00
01 23
01 00
Bottom Left
BE EF
03
06 00
62 22
01 00
01 23
02 00
Bottom Right
BE EF
03
06 00
F2 23
01 00
01 23
03 00
BE EF
03
06 00
31 23
02 00
01 23
00 00
RGB
BE EF
03
06 00
BA 22
01 00
03 23
00 00
Video
BE EF
03
06 00
2A 23
01 00
03 23
01 00
BE EF
03
06 00
89 22
02 00
03 23
00 00
Video
BE EF
03
06 00
D6 22
01 00
02 23
01 00
S-Video
BE EF
03
06 00
26 22
01 00
02 23
02 00
BE EF
03
06 00
75 23
02 00
02 23
00 00
Full
BE EF
03
06 00
43 D6
01 00
12 30
00 00
X1
BE EF
03
06 00
D3 D7
01 00
12 30
01 00
BE EF
03
06 00
70 D6
02 00
12 30
00 00
Off
BE EF
03
06 00
3B EF
01 00
C0 30
00 00
On
BE EF
03
06 00
AB EE
01 00
C0 30
01 00
BE EF
03
06 00
08 EF
02 00
C0 30
00 00
Off
BE EF
03
06 00
FF 32
01 00
00 26
00 00
On
BE EF
03
06 00
6F 33
01 00
00 26
01 00
BE EF
03
06 00
CC 32
02 00
00 26
00 00
Off
BE EF
03
06 00
03 33
01 00
01 26
00 00
On
Get
BE EF
BE EF
03
03
06 00
06 00
93 32
30 33
01 00
02 00
01 26
01 26
01 00
00 00
Off
BE EF
03
06 00
47 33
01 00
02 26
00 00
On
BE EF
03
06 00
D7 32
01 00
02 26
01 00
BE EF
03
06 00
74 33
02 00
02 26
00 00
Off
PinP Size
PinP Position
Set
Set
Get
PinP Audio Ch
Set
Get
PinP Input
Set
Get
Myscreen size
Set
Get
Myscreen Lock
Set
Get
IR Remote Front
Set
Get
IR Remote Rear
IR Remote Top
Set
Set
Command data
Header
Get
CRC
Action
(This table is continued to the following page.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
15
16CP-X1200/X1250 TEC-再1用 03.12.5 1:43 PM ページ16
RS-232CCommunication (continued)
Command Data Chart (continued)
Names
Operation type
Type
Setting code
BE EF
03
06 00
9E D9
01 00
18 20
10 00
BE
BE
BE
BE
EF
EF
EF
EF
03
03
03
03
06
06
06
06
AE
5E
9E
0E
01
01
01
01
18
18
18
18
03
00
04
05
S-Video
BE EF
03
06 00
3E D5
01 00
18 20
02 00
Video
BE EF
03
06 00
CE D5
01 00
18 20
01 00
Get
BE EF
03
06 00
6D D4
02 00
18 20
00 00
DISABLE
BE EF
03
06 00
A2 D5
01 00
19 20
00 00
ENABLE
BE EF
03
06 00
32 D4
01 00
19 20
01 00
Get
BE EF
03
06 00
91 D5
02 00
19 20
00 00
TURN OFF
BE EF
03
06 00
6E D5
01 00
1C 20
01 00
TURN ON
BE EF
03
06 00
FE D4
01 00
1C 20
01 00
Get
BE EF
03
06 00
5D D5
02 00
1C 20
00 00
TURN OFF
BE EF
03
06 00
FF 97
01 00
10 24
00 00
TURN ON
BE EF
03
06 00
6F 96
01 00
10 24
01 00
Get
BE EF
03
06 00
CC 97
02 00
10 24
00 00
All
BE EF
03
06 00
9F 30
01 00
08 26
00 00
1
BE EF
03
06 00
0F 31
01 00
08 26
01 00
2
BE EF
03
06 00
FF 31
01 00
08 26
02 00
3
BE EF
03
06 00
6F 30
01 00
08 26
03 00
Get
BE EF
03
06 00
AC 30
02 00
08 26
00 00
TURN OFF
BE EF
03
06 00
3B 89
01 00
20 31
00 00
TURN ON
BE EF
03
06 00
AB 88
01 00
20 31
01 00
Get
BE EF
03
06 00
08 89
02 00
20 31
00 00
All
BE EF
03
06 00
3F D8
01 00
70 25
00 00
1
2
BE EF
BE EF
03
03
06 00
06 00
AF D9
5F D9
01 00
01 00
70 25
70 25
01 00
02 00
3
BE EF
03
06 00
CF D8
01 00
70 25
03 00
4
BE EF
03
06 00
FF DA
01 00
70 25
04 00
5
BE EF
03
06 00
6F D8
01 00
70 25
05 00
BE EF
03
06 00
0C D8
02 00
70 25
00 00
Last Ch
Power Up Source
Auto Adjust Enable
Internal Speaker
Lens Lock
Remote ID
Auto Power On
Lens
Set
Set
Set
Set
M1-D
RGB
BNC
Component
Set
Set
Command data
Header
Set
Get
00
00
00
00
CRC
Action
D4
D4
D6
D7
00
00
00
00
20
20
20
20
00
00
00
00
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
16
Hitachi, Ltd. Tokyo, Japan
International Sales Division
THE HITACHI ATAGO BUILDING,
No. 15 –12 Nishi Shinbashi, 2 – Chome,
Minato – Ku, Tokyo 105-8430, Japan.
Tel: 03 35022111
HITACHI EUROPE LTD,
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA
UNITED KINGDOM
Tel: 01628 643000
Fax: 01628 643400
Email: consumer [email protected]
HITACHI EUROPE S.A.
364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: 1-6837200
Fax: 1-6835964
Email: [email protected]
HITACHI EUROPE GmbH
Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München
GERMANY
Tel: +49-89-991 80-0
Fax: +49- 89-991 80-224
Hotline: +49-180-551 25 51 (12ct/min)
Email: HSE- [email protected]
HITACHI EUROPE S.A.
Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este
08028 Barcelona
SPAIN
Tel: 93 409 2550
Fax: 93 491 3513
Email: [email protected]
HITACHI EUROPE srl
Via Tommaso Gulli N.39, 20147
Milano, Italia
ITALY
Tel: +39 02 487861
Tel: +39 02 38073415 Servizio Clienti
Fax: +39 02 48786381/2
Email: [email protected]
HITACHI Europe AB
Box 77 S-164 94 Kista
SWEDEN
Tel: +46 (0) 8 562 711 00
Fax: +46 (0) 8 562 711 13
Email: [email protected]
HITACHI EUROPE S.A.S
Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: 04 72 14 29 70
Fax: 04 72 14 29 99
Email: [email protected]
HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: 67 5190 30
Fax: 67 5190 32
Email: [email protected]
HITACH EUROPE AB
Egebækgård
Egebækvej 98
DK-2850 Nærum
DENMARK
Tel: +45 43 43 6050
Fax: +45 43 60 51
Email: [email protected]
HITACHI EUROPE AB
Neopoli / Niemenkatu 73
FIN-15140 Lahti
FINLAND
Tel : +358 3 8858 271
Fax: +358 3 8858 272
Email: [email protected]
Hitachi Europe Ltd
Bergensesteenweg 421
1600 Sint- Pieters-Leeuw
BELGIUM
Tel: +32 2 363 99 01
Fax: +32 2 363 99 00
Email: [email protected]
HITACHI EUROPE LTD
Na Sychrove 975/8
101 27 Pr aha 10 – Bohdalec
CZECH REPUBLIC
Tel: +420 267 212 383
Fax: +420 267 212 385
Email: [email protected]
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
www.hitachidigitalmedia.com
Disclaimer
This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.fixyourdlp.com
Video Guides: http://www.fixyourdlp.com/guides
User Forums: http://www.fixyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.fixyourdlp.com/counterfeits
Sponsors:
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsored by DM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement