C1720J5003AHF Data Sheet Rev A
Model C1720J5003AHF
Rev A
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C1720J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. It is designed
for PCS, DCS, DECT, and WCDMA-3G applications. The C1720J5003AHF is ideal
for balanced power and low noise amplifiers, plus signal distribution and other
applications where low insertion loss and tight amplitude and phase balance are
required. The C1720J5003AHF is available on tape and reel for pick and place high
volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability having X and
o
Y thermal coefficient of expansion (CTE) of 17 ppm/ C.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°°C)
Features:
•
•
•
•
•
•
•
•
•
1700 – 2000 MHz
0.7mm Height Profile
PCS, DCS, DECT, & WCDMA-3G
High Isolation & Low Loss
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Halogen-Free
Parameter
Min.
Frequency
Port Impedance
Return Loss
Isolation
Insertion Loss*
Amplitude Balance
Phase Balance (relative to 90°)
Power Handling
1700
Typ.
50
27
36
0.3
0.2
1
21
24
Operating Temperature
-55
Max
Unit
2000
0.4
1.0
5
4
MHz
Ω
dB
dB
dB
dB
Degrees
Watts
+85
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
.079±.004
[2.00±0.10]
Side View
Bottom View (Far-side)
4X .026 [0.65]
.027±.002
[0.68±0.05]
1
.049±.004
[1.25±0.10]
3
6X .009
[0.22]
.039 [0.98]
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
2
Pin
1
2
3
4
5
6
Designation
Input
GND
Isolated
Direct
GND
Coupled
6
5
6X .012
[0.30]
4
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C1720J5003AHF
Rev A
Typical Broadband Performance: 500 MHz. to 6000 MHz.
Insertion Loss
-3
-0.300
-6
-0.600
-9
-0.900
-12
-1.200
-15
-1.500
Isolation
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
6000
5500
5000
4500
4000
3500
-36
3000
Frequency [MHz]
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
4500
4500
4000
3500
3000
2500
2000
Frequency [MHz]
Frequency [MHz]
2500
1500
6000
5500
5000
-20
4500
-2
4000
-15
3500
-1.5
3000
-10
2500
-1
1000
0
-5
500
0
-0.5
2000
6000
5
2000
6000
0.5
1500
5500
10
1500
5500
1
1000
5000
15
1000
5000
1.5
deg
20
500
4000
Phase Balance
2
500
[dB]
Amplitude Balance
[dB]
3500
Frequency [MHz]
Frequency [MHz]
USA/Canada:
Toll Free:
Europe:
3000
2500
500
6000
5500
5000
4500
4000
3500
-3.600
3000
-3.300
-36
2500
-3.000
-33
2000
-2.700
-30
1500
-2.400
-27
1000
-2.100
-24
2000
-1.800
-21
1000
-18
1500
[dB]
0.000
500
[dB]
Return Loss - Input
0
Model C1720J5003AHF
Rev A
Typical Performance: 1600 MHz. to 2100 MHz.
Insertion Loss
Return Loss - Input
0.0
0
-0.3
-6
-0.6
-0.9
-1.2
-15
-1.5
Frequency [MHz]
Phase Balance
Amplitude Balance
20
15
1
10
0.5
5
-5
1600
2100
2000
1900
-20
1800
-15
-2
1700
-10
1600
-1
-1.5
Frequency [MHz]
2100
-0.5
2000
0
1900
0
1800
deg
1.5
1700
2
[dB]
2100
1600
Frequency [MHz]
2000
-3.6
2100
-3.3
-36
2000
-3.0
-33
1900
-2.7
-30
1800
-2.4
-27
1700
-2.1
-24
1900
-1.8
-21
1800
-18
1700
[dB]
-9
-12
1600
[dB]
-3
Frequency [MHz]
Isolation
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
2100
2000
1900
1800
1700
-36
1600
[dB]
-15
Frequency [MHz]
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C1720J5003AHF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical
o
and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ C.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
6X .014
[0.35]
4X .012
[0.30]
6X .013
[0.33]
.026
[0.66]
6X .002
[0.05]
4X Transmission
Line
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
Dimensions are in Inches [Millimeters]
Mounting Footprint
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C1720J5003AHF
Rev A
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
ØA
ØC
ØD
QUANTITY/REEL
4000
TABLE 1
REEL DIMENSIONS (inches [mm])
ØA
7.00 [177.8]
B
0.32 [8.0]
2.0 [50.8]
ØC
ØD
0.512 [13.0]
B
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anaren:
C1720J5003AHF
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement