User manual | EDIC Brochure

TABLE OF CONTENTS
Portable Extraction Cleaning Machines
Self-Contained Extractors
FiveStar
Comet
Polaris
Supernova
4
5
6
8
Box Extractors
Bravo Spotter
Galaxy
Galaxy Pro
Galaxy 5
Extraction Machine Accessories
Powermate
Wands, Carpet Tools and Attachments
Aviator Axial Fan
Aqua Dri Carpet Dryer
External Heater/Bazooka Gum Remover/Circuit Locator
Auto Detailing Equipment & Accessories
Galaxy Automotive
Galaxy 5
Bravo Spotter/Aqua Dri
Auto Accessories/Dynamo Wet/Dry Vacuum
9
10
11
12
13
14
16
17
18
19
20
21
22
Vacuums
Backpack Vacuums
Atlas 6 & 10 quart Backpack Accessories and Tools
23
24
Canister Vacuums - Dry Only
Dynamo 6 & 9 Qt. Canisters
28
Canister Vacuums - Wet/Dry
Dynamo 5 & 8 gallon
Dynamo 12 & 20 gallon
30
31
Upright Vacuums
Reliant
Automatic Scrubbers/Grout Restoration
Pilot
Floor Machines and Accessories
Burnishers
Dual Speed
Low Speed
Floor Machines Accessories
Spare Parts and Supplies
Brass fittings, hoses, pumps, spray tips, etc.
Rental Program Rental Equipment/Chemicals
32
33
34
35
36
37
38
43
SELF-CONTAINED EXTRACTORS
FIVESTAR
The amazing FiveStar is a small, self-contained unit with powerful brush
agitation to clean carpets, hard floors and grouted tile. It weighs only
40 pounds so it’s light enough for anyone to handle, plus the compact
body design and fold-down handle make it a breeze to transport and
store. Remove two screws and the machine opens like a clamshell for
fast service. The FiveStar is small enough to clean tight spaces and corners yet powerful enough to perform well in any commercial setting. A revolutionary bladder design allows you to fill and empty out of the
same bucket and eliminates the need to pour solution into the machine.
Simply fill the bucket, set it on the machine, close the lid and begin
cleaning. No more spills or mess!
Fold-down handle for
easy storage
and transport
SPECIFICATIONS
FEATURES
Solution Tank 3 gallon
Lift off Recovery Tank 3 gallon
Solution Pressure 50 psi
Vacuum Motor
112 CFM, 2 HP
n Full complement of optional accessories attaches to back of unit for cleaning upholstery, stairs, etc.
Water Lift
107”
n Handle adjusts to operator height and folds down for easy storage.
Brush Motor
1/6 HP
n Patented lift-off bucket with bladder makes filling and emptying incredibly easy.
Brush Speed 2,500 RPM
Brush Style Chevron design, 4 row
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
12 inches
Tank Construction
Polyethylene
Wheels 7 inches, non-marking
Power Cord
25 ft. Dimensions
24”H x 23”L x 12”W
Weight 40 lbs.
330AC
357AC 341AC
341AC-15
Shipping Weight
53 lbs.
For our full line of optional accessories (1!f” diameter), see pages 13-16.
Ship Dimensions
28”H x 26”L x 15”W
Electrical Draw
12 amps
WARRANTY
n Patented self-adjusting, self-leveling brush and vacuum shoe for easy cleaning of all carpet lengths and uneven floors plus longer brush life.
Lifetime on rotationally-molded housing,
2 years on parts and labor n See-through recovery dome.
n Side extension for cleaning right to baseboards.
n Upright-mounted motor and intercooler system combine for long-lasting operation.
OPTIONAL ACCESSORIES
10” Single-jet stainless steel wand
Upholstery tool, vacuum and solution hose assembly and hose bag
8’ vacuum and solution hose assembly
15’ vacuum and solution hose assembly
MODELS
401TR 411TR
Carpet Cleaner Only All Floor Unit: carpet, hard floor and grouted tile
4
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
COMET
The Comet is a small, economical, self-contained unit with powerful
brush agitation to clean carpets. It weighs only 40 pounds so it’s light
enough for anyone to handle, plus the compact body design and folddown handle make it a breeze to transport and store. Remove two
screws and the machine opens like a clamshell for fast service. The
Comet is small enough to clean in tight spaces and corners yet powerful enough to perform well in any commercial setting. A revolutionary
bladder design eliminates the need to pour solution into the machine.
Simply fill the bucket, set it on the machine, close the lid and begin
cleaning.
No more spills or mess! The single on-off switch is designed for operation simplicity.
FEATURES
n Patented self-adjusting, self-leveling brush and vacuum shoe for easy cleaning of all carpet lengths and uneven floors plus longer brush life.
n Full complement of optional accessories attaches to the back of unit for cleaning upholstery, stairs, etc.
n Handle adjusts to operator height and folds down for compact storage.
n Patented lift-off bucket with bladder makes filling and emptying incredibly easy.
n See-through recovery dome.
n Side extension for cleaning right to baseboards.
n Upright mounted motor and intercooler system combine for long-lasting
operation.
OPTIONAL ACCESSORIES
330AC
357AC
341AC
341AC-15
10” Single-jet stainless steel wand
Upholstery tool, vacuum and solution hose assembly and hose bag
8’ vacuum and solution hose assembly
15’ vacuum and solution hose assembly
SPECIFICATIONS
Solution Tank
3 gallon
Liftoff Recovery Tank
3 gallon Solution Pressure 50 psi
Vacuum Motor
92 CFM
Water Lift
85”
Brush Motor 1/12 HP
Brush Speed 2500 RPM
Brush Style Chevron design, 3 rows
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
12 inches
For our full line of optional accessories (1!f” diameter), see pages 13-16­.
Tank Construction
Polyethylene
MODEL
Wheels
7 inches, non-marking
Power Cord
25 ft.
419TR Carpet Cleaner
Dimensions: 24”H x 23”L x 12”W
WARRANTY
Weight 40 lbs.
Lifetime on rotationally-molded housing, 2 years on parts and labor
Shipping Weight 53 lbs.
Ship Dimensions
28”H x 26”L x 15”W
Electrical Draw
12 amps
5
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
POLARIS 500PS, 700PS, 701PS
These self-contained workhorses combine remarkable ease
of operation with unbeatable performance and portability to
deliver consistent results in light speed!
The Polaris is big enough to tackle large rooms and hallways and is available with a full complement of accessories giving it maximum versatility to clean upholstery,
stairs and other hard to reach places. A lift-off recovery
bucket makes emptying quick and easy without the
need for a drain hose. Special features including the
patented 4-wheel design,
adjustable handle and lightweight construction allow
easy transportation and
unparalleled balance and
maneuverability.
Clamshell design provides easy
internal access for fast service
FEATURES
SPECIFICATIONS
Patented 4-wheel design makes turning in tight places easy and balances
total weight, even full of water, for easy maneuvering.
n Lift-off recovery bucket—no drain hose.
n Patented self-adjusting, self-leveling brush combine for consistent cleaning
of all carpet lengths and uneven floors.
n Fully adjustable handle for greater operator ease, increased leverage on
stairs and over curbs plus compact storage.
n Side extension for cleaning right to baseboards (700PS/701PS).
n Upright-mounted vacuum plus intercooler system extends motor life.
n See-through recovery dome.
n
Solution Tank
5 gallon/7gallon Solution Pressure 50 psi (500 & 700)
100 psi (701)
Vac Motor
112 CFM, 2 HP, 136” lift
Brush Motor
4200 RPM, 1/6 HP
Brush Speed
2100 RPM
Brush Style
Chevron design
Brush Bearings
Sealed, stainless steel ball bearings
Cleaning Width
14/17 inches
Tank Construction
Polyethylene
OPTIONAL ACCESSORIES
Wheels
7 inches, non-marking
Power Cord
25 ft. (500)
50 ft. detachable (700/701)
Dimensions:
500PS
700/701PS 39”H x 30”L x 14”W
39”H x 30”L x 17”W
Weight
68/78 lbs.
Shipping Weight 95/103 lbs.
Ship Dimensions
42”H x 34”L x 21”W
1204AC D02359-1 358AC
323AC 1033AC
1034AC
1041AC
Electrical Draw
14/14/15 amps
Powermate—12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery Cleaning Kit—Upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
15 ft. vac and solution hose assembly with adapter plate
For our full line of optional accessories (1!s” diameter), see pages 13-18.
MODELS
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
500PS 5-gallon Polaris/14” wide/50 psi
700PS 7-gallon Polaris/17” wide/50 psi
701PS 7-gallon Polaris/17” wide/100 psi
6
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
POLARIS
801PS, 1201PS
For wide open spaces where productivity is the bottom line,
the 800 and 1200 models clean quickly and efficiently.
These larger self-contained units come equipped with dual
vacuums to more thoroughly clean and dry carpets. The
Polaris has a built-in silencer so you can clean without
interrupting the workflow. Top quality construction,
remarkable ease of operation and versatility combine
for a machine that consistently outperforms the competition. Dual lift-off recovery buckets with no hose
to detach allow
easy emptying.
Maintenance
is a breeze as
well—just remove
two screws and
open like a clamshell
for quick internal access. Quick-fit accessories
New optional valve allows you to adjust the performance
of the machine for regular maintenance or heavy-duty
restorative cleaning.
FEATURES
Large wheels, adjustable handle and light-weight construction team up for
easy handling and storage.
n Optional accessories quickly attach to the rear of machine for cleaning
stairs, upholstery, etc.
n Patented dual lift-off recovery buckets provide quick and convenient emptying.
n Patented four-wheel design for balance and reduced turning radius.
n High speed brush motor and brush guarantee powerful agitation to release
deeply embedded soil and grit, extending carpet life.
n Patented brush system utilizes fully sealed stainless steel ball bearings for
years of trouble-free operation.
SPECIFICATIONS
Solution Tank 8/12 gallon Solution Pressure 100 psi
Vac Motors Dual, 2-stage bypass, 200 CFM, 3.5 HP
Brush Motor 4200 RPM, 1/6 HP
Brush Speed 2100 RPM
Brush Style
Chevron design
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
19 inches
Tank Construction
Polyethylene
OPTIONAL ACCESSORIES
Wheels
8 inches, non-marking
1204AC
D02359-1 358AC
323AC 1033AC 1034AC 1041AC
Power Cord
50 ft. detachable
Dimensions:
801PS
1201PS
38”H x 48”L x 19”W
38”H x 48”L x 19”W
Weight 114/120 lbs.
Shipping Weight 131/136 lbs.
Ship Dimensions
42”H x 45”L x 25”W
Electrical Draw
15/15 amps
n
Powermate—12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery Cleaning Kit—Upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
15 ft. vac and solution hose assembly with adapter plate
For our full line of optional accessories (1!s” diameter), see pages 13-18.
MODELS
WARRANTY
801PS 8-gallon Polaris/19” wide/100 psi
1201PS 12-gallon Polaris/19” wide/100 psi
Lifetime on rotationally-molded housing, 2 years on parts and labor
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
7
SELF-CONTAINED EXTRACTORS
SUPERNOVA
There is literally nothing like the Supernova series—remarkable self-
contained extractors that clean in both forward and reverse! The patented twoway system provides unparalleled productivity in any setting—clean up to
4,000 square feet in one hour. All models operate forward in hallways and
other open areas, but with a simple pull of a lever
instantly change to reverse to clean corners and
other tight areas for a dramatic reduction in labor
costs. A specially designed vacuum head allows
cleaning on hard floors in addition to carpets,
without any cumbersome attachments. Just walk
off carpet on to hard floors—it’s that simple. Dual
vacuum motors and a 19” cleaning width on the
800 and 1200 models combine with a host of
other exclusive features to guarantee unrivaled
Optional accessories
for versatile cleaning
performance.
FEATURES
SPECIFICATIONS
Solution Tank
7/8/12 gallon Solution Pressure 50 psi
Vacuum Motor/700
112 CFM; 2 HP
Vac Motors/800/1200 Dual, 2-stage bypass, 200 CFM, 3.5 HP
Brush Motor 4200 RPM, 1/6 HP
Brush Speed 2100 RPM
Brush Style Chevron design
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
17/19/19 inches
Tank Construction
Polyethylene
Wheels
8 inches, non-marking
Power Cord
50 ft. detachable
Dimensions:
700
800
1200
37.5”H x 31.75”L x 17”W
38”H x 39”L x 19.25”W
38”H x 39”L x 19.25”W
Weight 87 lbs./113 lbs./123 lbs.
Shipping Weight 115 lbs./136 lbs./146 lbs.
Ship Dimensions
42”H x 34”L x 21”W (700)
42”H x 45”L x 25”W (800/1200)
Electrical Draw
WARRANTY
12.8/12.8/15 amps
Lifetime on rotationally-molded housing,
2 years on parts and labor
n Two-way system for forward and reverse operation.
n Patented self-adjusting, self-leveling brush and vacuum shoes for easy
cleaning of all carpet lengths and uneven floors plus longer brush life.
n Exclusive “clamshell” body provides fast and easy internal access for quick servicing.
n Patented lift-off recovery buckets –no drain hose.
n Fully adjustable handle.
n Patented 4-wheel design gives extraordinary balance and reduces turning radius for easy maneuverability in tight areas.
n Side extension for cleaning right to baseboards.
n Dual spray jets on both sides of the brush suspend the soil for increased
pick up and faster drying.
OPTIONAL ACCESSORIES
1204AC D02359-1 358AC 323AC
1033AC
1034AC
334AC
1041AC
Powermate —12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery Cleaning Kit
Upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
Hard floor squeegee wand
15 ft. vac and solution hose assembly with adapter plate
For our full line of optional accessories (1!s” diameter), see pages 13-18.
MODELS
700PSN 800PSN
1200PSN
7-gallon Supernova
8-gallon Supernova, Dual Vacuum
12-gallon Supernova, Dual Vacuum
8
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
BRAVO
SPOTTER
AVAILABLE WITH HEAT!
The new Bravo spotter delivers incredible efficiency and power in a deceptively small package. No set up time—simply unload and begin cleaning
immediately. Compact size and maneuverability make it
ideal for spotting and quick cleaning of small carpeted
areas, upholstery and auto interiors. Operators will
appreciate the specially designed molded-in holders
that carry spray bottles, leaving the hands free.
Over time it’s a winner too, thanks to the
upright-mounted
vacuum motor and
oversized recovery
tank that combine
to insure longer motor
life. The Bravo is now available in a 2-gallon or 3-gallon size
Porthole allows
easy access to
and most models come complete
recovery tank
with hose assembly and tool.
SPECIFICATIONS
FEATURES
Solution Tank
2 gallon/3 gallon
n
n
n
n
n
Recovery Tank
3.5 gallon
Solution Pressure
55 psi
Vacuum Motor
2 stage, bypass
Water Lift
85” (optional 106” with high performance motor)
Handle
Adjustable, 22-37”
Wheels
6 inches
Power Cord
25 ft.
Optional Heater 1500 watts, stainless steel
Hose Assembly
8 ft.
Economy Tool
Plastic
Deluxe Tool
Long nose, stainless steel handle
High Heat Tool
Long-nose, all stainless steel
Weight
17 lbs./19 lbs.
Shipping Weight
25 lbs. /27 lbs.
Dimensions
20.5”H x 15”L x 13”W
Ship Dimensions
23”H x 18”L x 15.5”W
Electrical Draw
239BH-HT/339BH-HT 8.5/8.5/8.5/12/12 amps
15/15 amps
Optional in-tank heater delivers 170-degree heat. (239BH-HT & 339BH-HT)
Unique molded-in holders carry spray bottles for greater ease.
Large six-inch wheels and an optional transport handle plus cord
wrap assembly make it a snap to wheel about.
Quickly opens up for easy servicing and repair.
Large porthole on recovery tank allows easy access for odor-free maintenance.
OPTIONAL ACCESSORIES
330ACS/330ACH
334AC
1204AC/1204ACH
B00216
323AC/323ACH
342AC
1040AC 1039AC 1037AC MODELS
219B 219BH
237BH
200MH
300MH
239BH-HT
339BH-HT
10” Single-jet wand
10” Hard-floor squeegee wand
Powermate – 12” wide powerbrush
Power cord for Powermate
Prespray wand
8-ft. hose assembly with quick connects
15-ft. hose assembly
Stainless steel upholstery tool
Upholstery tool, durable plastic head
For our full line of
optional accessories
(1!s” diameter), see
pages 13-18.
Bravo with economy tool (319AC)
Economy tool and transport handle
Deluxe tool and transport handle
Deluxe model with high performance motor (tools sold separately)
Deluxe model with high performance motor (tools sold separately)
Bravo with heat, stainless steel tool and transport handle
Bravo with heat, stainless steel tool and transport handle
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
9
BOX EXTRACTORS
GALAXY
HEAT READY!
Introducing our exclusive new line-up of Galaxy carpet extractors that now
comes “heat-ready.” Life’s little decisions just got a whole lot easier! You
can purchase any Galaxy without heat and if you change your mind, no
problem. Simply order our exclusive new external heater, and away you go.
Placing the heater on the outside also insures that everything on the inside
of the machine runs cooler, extending the life of the vacuum and pump
motors. The stainless steel heater tank is guaranteed for life. If a repair is
necessary, simply lift the heater off the back of the machine. Meantime,
you can continue to use the unit without heat.
From a seller’s standpoint, there’s no need to purchase
both heated and non-heated units — just stock machines
and heaters. Your customers can start with a non-heated
model then later upgrade to heat without having to purchase a whole new machine. The “heat ready” Galaxy
includes a 25-foot vacuum and solution hose assembly.
**Also Available: Our basic contractor’s model, slightly
more economical and complete with 15’ hose assembly,
with or without heat. Heated model includes a 1200-watt
external-mount heater and works with a single power cord.
SPECIFICATIONS
Solution Tank
12 gallon
Recovery Tank
11 gallon
FEATURES (Galaxy and Galaxy Pro)
Solution Pressure
100/150/200/500 psi
Vacuum Motors
Dual high performance 2-stage and 3-stage
Water Lift
150”/ 170”/190”/210”
Tank Construction
Polyethylene
n New “heat-ready” system offers ultimate in versatility.
n External heater makes repairs a snap and keeps heat away from the motor
compartment.
n New “granite look” projects an image of professionalism and keeps the
machine looking brand new.
n Upright-mounted motors along with a special intercooler guarantee long life
and durability.
n Standard 5-gallon bucket fits under drain valve for easy emptying.
n Opens quickly like a clamshell for easy servicing.
n Top-mounted switches.
n Sealed motor cavity insures that spills on the outside stay out.
Baseplate
!f” aluminum
Rear Wheels
10 inches, non-marking
Casters
4 inches
Power Cord
50 ft. detachable
Hose Assembly
25 ft.
Optional Wand
Deluxe dual-jet S-bend
stainless steel
Dimensions
35”H x 31”L x 18”W
Weight
78/80/89/75/84 lbs.
Shipping Weight
94/96/105/105/91/100 lbs.
Ship Dimensions
35”H x 31L” x 19W”
Electrical Draw
Dual Cord (FX)
2000EL/EL-EH
15/17.5/18/18/20/20 amps
17/15 per cord
15/18
WARRANTY
Lifetime on rotationally-molded housing, 2 year on parts and labor
10
OPTIONAL ACCESSORIES (see page 11)
MODELS
All come complete with 25-ft hose assembly
2000SX-HR
Dual 2-stage vacs, 150” lift, 100 psi
2000MX-HR
Dual 2-stage vacs. 170” lift, 150 psi
2000JX-HR
Dual 2-stage vacs, 150” lift, 200 psi (adj)
2000WX-HR*
Dual 2-stage vacs, 170” lift, 200 psi (adj)
2000KX-HR* Dual 2-stage vacs, 190” lift, 200 psi (adj)
2000LX-HR
Dual 2-stage vacs, 150” lift, 500 psi (adj)
2000BX-HR*
Dual 2-stage vacs, 170” lift, 500 psi (adj)
2000CX-HR*
Dual 3-stage vacs, 190” lift, 500 psi (adj)
2000FX-HR
Dual 3-stage vacs, 210” lift, 500 psi (adj)
2000EL Single 3-stage vac, 136” lift, 15’ hose assembly
2000EL-EH
Single 3-stage vac, 136” lift, 15’ hose assembly, external-mount 1200-watt heater, single power cord EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
GALAXY PRO
HEAT READY!
This is the big brother to our popular Galaxy series with a large 17-gallon capacity housed within an extremely portable unit that’s affordably
priced. The new “heat-ready” Galaxy Pro includes all the great features
of our standard Galaxy model with the added benefits of an optional
adjustable 500 psi and the ability to clean extremely large areas quickly
and professionally. Versatility is the name of the game with the heatready system. You can purchase the machine without
heat and then later decide to add heat without having
to buy a new unit. The external heater makes repairs
a snap, and it keeps the heat away from the internal
components, extending the life of the machine. All
units are available “heat ready.” The Galaxy Pro comes
complete with a 25-foot hose assembly and a 50-foot
detachable power cord.
Optional external
heater for Galaxy
and Galaxy Pro
SPECIFICATIONS
FEATURES (see page 10)
OPTIONAL ACCESSORIES (Galaxy and Galaxy Pro)
605HR Heater kit (see page 18 for more details)
1033ACH
Single-jet stainless steel wand (specify psi)
1034AC/ACH Dual-jet stainless steel wand (specify psi)
334ACH 10” hard floor squeegee wand
1039ACH
Stainless steel detailer tool
1204AC/ACH Powermate – 12” wide power brush (specify psi)
1800AC-100 18” Powermate, up to 150 psi
1800AC-200 18” Powermate, up to 500 psi
00206-1A
Receptacle for power wand (factory installed)
988CS
Circuit locator
For our full line of optional accessories (1!s” diameter), see pages 13-18.
MODELS
All come complete with 25-ft hose assembly 2700MX-HR
Dual 2-stage vacs, 170” lift, 150 psi
2700JX-HR
Dual 2-stage vacs, 150” lift, 200 psi (adj)
2700WX-HR*
Dual 2-stage vacs, 170” lift, 200 psi (adj)
2700KX-HR* Dual 2-stage vacs, 190” lift, 200 psi (adj)
2700LX-HR
Dual 2-stage vacs, 150” lift, 500 psi
2700BX-HR*
Dual 2-stage vacs, 170” lift, 500 psi (adj)
2700CX-HR*
Dual 3-stage vacs, 190” lift, 500 psi (adj)
2700FX-HR
Dual 3-stage vacs, 210” lift, 500 psi (adj)
dual power cords, circuit locator included
Solution Tank
17 gallon
Recovery Tank
15 gallon
Solution Pressure
150/200/500 psi
Vacuum Motor
2-stage and 3-stage
Dual high performance
Water Lift
170”/190”/210”
Optional Wand
Dual-jet or Single-jet
stainless steel.
Hose Assembly
25 ­ft.
Tank Contruction
Polyethylene
Baseplate
1/4” Aluminum
Rear Wheels
10 inches
Casters
4 inches
Power Cord
50 ft. detachable
Dimensions
38”H x 31”L x 20”W
Weight
94/102/102/110/110/120 lbs.
Shipping Weight
114/122/122/130/130/140 lbs.
Ship Dimensions
40”H x 39”L x 22”W
Electrical Draw
17.5/18/18/20/20 amps
Dual cords – 17/15 amps
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
11
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
GALAXY 5
NOW AVAILABLE HEAT READY!
­ ne look at our new compact addition to the Galaxy series and you’ll realO
ize that it is possible to have your cake and eat it too! The Galaxy 5 was
designed for remarkable heat and power all housed within an incredibly
lightweight and portable package. The Galaxy 5 is an obvious choice for
auto detailing and for those jobs where a small yet powerful unit makes
more sense. It’s light enough for anyone to handle and the fold-down
handle makes it a snap to transport and store. We’ve also added an exclusive baffle system for exceptionally quiet operation. The new optional
external heater can be removed in seconds if a repair is necessary, and
the stainless steel heating element is guaranteed for life. The Galaxy 5
comes complete with a
15-foot hose assembly. Optional
external heater
FEATURES
SPECIFICATIONS
Solution Tank
5 gallon
Recovery Tank
4 gallon
Solution Pressure
50/100 psi
Optional Heater
1200 or 2000 Watts, stainless steel
Vacuum Motor
Single 3-stage
Water Lift
136”
Tank Construction
Polyethylene
Baseplate
Aluminum
Rear Wheels
7 inches, non-marking
Casters
2.5 inches­
Power Cord
25 ft. detachable
Hose Assembly
15 ft.
Dimensions
28”H x 24.5”L x 16”W
Weight
57 lbs.
Shipping Weight
65 lbs.
Ship Dimensions
30” H x 25.5”L x 17”W
OPTIONAL ACCESSORIES
1204AC/1204ACH
B00216
330ACS
1038AC
1039AC
323AC/323ACH
Powermate – 12” wide power brush
Power cord for Powermate
10” Stainless steel wand
Crevice tool
Stainless steel upholstery tool
Prespray wand
MODELS
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
12
n External heater is a snap to remove and keeps heat away from the inside
of the machine for longer life.
n “No drip” motor cavity guarantees water spilled on outside of machine
stays out!
n Opens quickly like a clamshell for fast and easy servicing.
n Upright-mounted motors along with a special intercooler guarantee long
life and durability.
n Full complement of optional accessories attaches to the back of unit for
cleaning upholstery, stairs, etc.
n Silencer system for quieter operation.
n Handle folds down for easy transport and compact storage.
n Optional heating system delivers consistent 170 degrees.
All models come complete with a 15-foot hose assembly.
500AX 3-stage vac, 50 psi
500BX 3-stage vac, 100 psi
500BX-EHR 100 psi w/extermal 1200-watt heater, single power cord
500BX-HR 100 psi, heat ready
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
POWERMATE
1204AC
1800AC
Why use a standard wand
when you can get a combination of powerful brush
agitation and speed in a
super lightweight attachment
with wheels—all at a bargain price! So lightweight and maneuverable,
the Powermate will triple
your productivity. No more
backaches and fatigue from
slow, tedious cleaning with
a wand. The Powermate
attaches to any portable unit
to remove deeply imbedded soil and grit at record speed! A
high-speed cylindrical brush gets down to the base of the
carpet fibers for more effective cleaning. Available with 1!s”
diameter handle. Choice of standard unit up to 100 psi or
high heat up to 300 psi.
The ultimate in speed and
power for a deep down
clean! Powermate 1800AC
attaches to any portable or
truckmount extractor for
cleaning tough, dirty hightraffic areas. An 18” wide
cleaning path and highspeed brush save valuable
time and reduce operator
fatigue. This power brush
is designed to clean right
up to baseboards and into
corners. Its fully adjustable
handle fits any size operator and the low profile makes it a
breeze to get under furniture. Choice of standard unit up
to 150 psi or high heat up to 500 psi.
n
n
n
n
n
0-90 degree adjustable handle plus fingertip controls for easy handling.
n High-speed chevron-style brush for deep cleaning.
n See-through sight glass to monitor recovery.
n Heavy-duty steel handle.
n Adapts to all EDIC extractors.
n 5 Spray tips.
n
FEATURES
n
FEATURES
Weighs only 15 lbs.
See-through front cover.
Sealed, stainless steel ball bearings.
High-speed 2500 RPM brush for deep cleaning.
Heavy-duty aluminum handle.
Adapts to all EDIC extractors.
SPECIFICATIONS 1200/1800
Cleaning Width
12 inches/18 inches
B00216
Adapter to plug Powermate into standard wall outlet
00206-1A Receptacle, power wand (factory installed)
Housing
Ultra high-impact ABS
Brush
Cylindrical; Tynex bristles
Brush Motor
1/12 HP/1/6 HP
MODELS
Brush Speed
2500 RPM/2100 RPM
Electrical Draw
1.0/1.25 amps
OPTIONAL ACCESSORIES
1204AC
1204ACH
1800AC-100
1800AC-200
12” wide power brush, 1!f”/1!s” handle diameter—up to 100 psi
High heat—up to 300 psi
18” wide power brush, 1!s” handle diameter—up to 150 psi
High heat—up to 500 psi
Power Cord
25 ft.
Weight
15 lbs./47 lbs.
Shipping Weight
25 lbs./54 lbs.
Ship Dimensions:
1204AC 13.5”H x 49.5”L x 18”W
1800AC 58.5”H x 21”L x 9.5”W
WARRANTY
1 year on parts and labor
13
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES/easy mop
GLIDEMASTER
WANDS, TOOLS, HOSE ASSEMBLIES
Single-jet 9” Stainless Steel Wand
This wand is perfect for use with smaller
extractors like the FiveStar. 1!!f” or 1!s”
diameter available.
MODELS
330ACS 1!s” fittings—100 psi - All other EDIC Extractors
330AC 1!f” fittings—100 psi - Fivestar
Single or Dual-Jet Stainless Steel Wand
The Glidemaster wands allow for easy pickup under
furniture and desks. The head is winged to prevent
overspray and the insulated handle, valve lever and grip
ensure operator comfort. The dual-jet version has an
S-bend for superior pickup under all types of furniture.
Dual-jets guarantee maximum pressure for fast and
thorough cleaning. Standard or high-pressure models
available—up to 1000 psi. 1!s” diamter.
MODELS
1033AC/1033ACH
1034AC/1034ACH
1034ACH-500
Single jet: Standard/High Pressure
Dual jet: Standard/High Pressure
Dual jet: High Pressure up to 500 psi
Width: 12”
Length: 60”
Weight: 7.4 lbs.
12 lbs.
Ship Dimensions: 12” x 13” x 65”
Aluminum Squeegee Wand
Our new aluminum
squeegee wand can
be attached to any
extractor with 1 ½”
diameter to provide
thorough cleaning of
hard floor surfaces.
Length: 60”
Weight: 8 lbs.
Shipping Weight.: 11 lbs.
Ship Dimensions: 12” x 13” x 65”
Traditional Hose Assemblies
Available with choice of standard or high heat-high pressure
models. Lengths from 10’– 50’. 1!s” or 1!f” hose cuffs. Complete
with fittings, see page 35.
Connector—Model # J00630
Allows you to quickly connect two hose assemblies together for
extra length, see page 35.
Bucketless Floor
Cleaning System
The Easy Mop is
a self-contained
dispensing mop
system that
cleans floors, ceilings and walls with no spills, no mess. A zerogravity trigger-action sprayer with an adjustable nozzle makes it
easy to clean up the sides of walls and even ceilings and get into
corners and tight spaces. The Easy Mop is designed to work in
tandem with green chemicals and requires much less chemical
than a standard mop.
FEATURES
MODEL
334AC Single jet squeegee wand
Width:
9”
Easy Mop
Shipping Weight.: Width: 14.5”
Length: 55.5”
Weight: 5 lbs.
n Pressurized reservoir – cleans up to 3,200 sq. feet per filling.
n Easy-grip activator is ergonomically sound and activates solution
with a slight downward movement, reducing operator fatigue.
n Non-shrinking microfiber-pile mop provides increased absorbency
and can be laundered over 500 times before replacement. Shipping Weight: 9 lbs.
MODELS
Ship Dimensions: 12” L x 13”W x 65”H
4000EM Easy Mob
4500GG Microfiber Pad (Green/Green)
4500GW Microfiber Pad (Green/White)
14
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
Cast aluminum with black powder coat
upholstery tool with see-through window,
enclosed spray chamber, 3-ft. pigtail and
recirculating notches, decreasing water
build-up in spray chamber for faster
drying time. High pressure available.
MODELS
321AC
1!s” diameter
321ACH
High Pressure—up to 300 psi
Width: 3.5” Length: 7”
Weight: 1.5 lbs. Ship Wt: 3 lbs.
Upholstery tool with see-through window
and hose assembly complete with durable
hose bag.
MODELS
357AC
358AC
Weight: Ship Wt: 8 ft. hose assy., tool and hose bag. 1!f” diameter
15 ft. hose assy., tool &
hose bag. 1!s” diameter.
4 lbs./8.8 lbs.
6 lbs./12 lbs.
Durable stainless steel auto detailer tool
specially designed to effectively clean in
tight places. High pressure up to 1000 psi.
This auto detailer has a durable plastic
head to monitor recovery. Up to 100 psi.
MODEL —1039AC (1!s” diameter)
MODEL—1037AC (1!s” diameter)
Width: 3.5” Length: 11.5”
Weight: 1.7 lbs. Ship Wt: 3 lbs.
Weight: 1.3 lbs. Ship Wt: 3 lbs.
Width: 4 Length: 8””
Light weight, economy upholstery tool
with a durable plastic housing. Not
available for high heat. Up to 100 psi.
MODELS
319AC 319ACG
319ACS
Width: 4” Weight: Ship Wt:
Stainless steel crevice tool for reaching
into crevices and tight spaces for more
thorough cleaning. Up to 1000 psi.
MODEL —1038AC (1!s” diameter)
Length: 17”
The ultimate in stair cleaning, the stainless
steel stair wand has a winged head, grab
handle and insulated grip. High pressure
up to 1000 psi.
MODEL —1035AC (1!s” diameter)
Width: 12” Length: 36”
Weight: 4.5 lbs. Ship Wt: 7.5 lbs.
Lightweight stainless steel stair tool is
made of high quality components and
built to last. High pressure up to 1000 psi.
MODEL —1021AC (1!s” diameter)
Weight: 2 lbs.
Ship Wt: 3 lbs.
Width: 4” Length: 8”
Tool w/8’ hose assy.,
1!f” diameter
Tool w/ 8’ hose assy., 1!s” diameter. Add D02359-1 for Polaris
and Supernova models.
Tool only, 1!s” diameter
Length: 11.5” 2.6/2.6/1 lbs.
5/5/3 lbs.
Width 3.5”
Prespray wand constructed of brass
with 25’ hose.
MODELS
323AC—up to 100 psi
323ACH— High heat, high pressure
Weight: 3 lbs. EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
Ship Wt: 5 lbs.
15
EXTRACTION MACHINE ACCESSORIES
AVIATOR
Axial Fan
Superior performance design and engineering makes our new
axial fan the most efficient in the industry, providing more CFM
with a lower amp draw. Use our large-sized blower to tackle even
the toughest water damage restoration and carpet drying jobs in
a hurry. With an amazing velocity of 3000 CFM at a super-low
2.3 amps, the Aviator literally blows away the competition! The
bottom line is a much faster drying time which puts more money
in your pocket. A built in GFCI outlet means you can link together multiple units using only one 15-amp circuit for the really big
jobs. Plus the dual-direction airflow and choice of drying positions make it extremely versatile. The Aviator axial fan is uniquely
designed with 360-degree stacking for easy loading and storage. It’s lightweight with an ergonomically-designed handle and convenient cord wrap for easy transport and maneuvering. Comes
complete with an hour meter to monitor usage.
Built-in GFCI outlet for linking
multiple units on a single circuit
SPECIFICATIONS Housing
Roto-molded Polyethylene
Motor
0.25 HP
Speeds
2
Power
120 Volts
Electric Draw
2.3 amps
Impeller
16.5 “ diameter
Stackable
Yes
Power Cord
25 ft. Yellow Safety Cord
Weight
29 lbs.
Shipping Weight
36 lbs.
Dimensions
20.5”H x 20.5”L x 16”W
Ship Dimensions
21”H x 21” L x 16” W
Aviator with wheels
Easy and secure 360degree stacking of units
FEATURES
The most powerful blower in its class with a velocity of 3000 CFM.
Built-in GFCI outlet makes it easy to daisy-chain multiple units on a
single 15-amp circuit.
n Hour meter monitors usage.
n Exclusive 360-degree frame allows for easy stacking of units.
n Circuit breaker protects air mover and attached devices.
n Durable polyethylene housing in granite color that retains its brand-new appearance.
n Available in a low 2.3 amps.
n
n
WARRANTY
MODELS
Lifetime on rotationally-molded housing,
2 years on parts and labor
3009AF
Aviator Axial Fan
3009AF-W Aviator with wheels
16
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
AQUA DRI
(patents pending)
Portable Air Mover/Carpet Dryer
EDIC’s Aqua Dri hosts a series of exclusive features that put it far
ahead of the pack and make it indispensable for quick drying of carpet
and hard floors. The Aqua Dri’s unique body design makes it super
easy to stack for storage or transport. There are two models to choose
from: The standard unit offers three-speed drying with a !s HP motor
and 2400 CFM. The larger Aqua Dri Pro offers three-speed drying
with !s HP (2700 CFM) for the ultimate in power. Both models can be
easily adjusted to four different positions for drying carpets, furniture,
curtains, ceilings—you name it! Available with
optional carpet clamp.
Accordion hose attachment for attics
and other hard-to-reach places
Optional carpet clamp
FEATURES
n
n
n
n
n
Exclusive hi-tech design makes it the most
versatile, compact and portable air mover
in the industry.
Heavy-duty polyethylene housing with new
“granite” look is durable and never looks dirty.
Balanced carry-along handle distributes weight
evenly for superior portability.
Easy to store or stack for transport.
Thermally protected motor
SPECIFICATIONS 3004AD/3005AD
Housing
Polyethylene
Motor
!s HP/ !s HP
Speeds
3
Power
2400/2700 CFM
Electrical Draw
5.0 amps
Blower Fan
9 1/2” /10 5/8” diameter
Intake Screens
Open flow design
Height Adjustment 4 positions
Stackable
Yes
Kickstand
Included
Carpet Clamp
Optional
Power Cord
25 ft.
Dimensions:
3004AD
3005AD 18”H x 18#f “L x 17#k “ W
19#f “H x 20%k”L x 19!f” W
Weight
30/33 lbs.
Shipping Weight
33/36 lbs.
Ship Dimensions Optional Accessory
13168A
Accordion hose attachment
Length: 15 ft. Diameter: 10 in.
Tightening belt allows hose to attach to the nose of the Aqua Dri or other
competitive air mover.
Yellow with black fabric wear strip.
WARRANTY
19” x 19” x 18”
21”H x 21”L x19 !s ”W
MODELS
All models available with optional carpet clamp
3004AD
3005AD
3004AD-CC
3005AD-CC
Aqua Dri, !s HP, 9!s” fan
Aqua Dri Pro, !s HP, 10%k” fan
Aqua Dri, !s HP, 9!s” fan
with carpet clamp
Aqua Dri Pro, !s HP, 10%k” fan
with carpet clamp
Lifetime on rotationally-molded housing,
2 years on parts and labor
17
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
EXTERNAL HEATER SYSTEM
A revolutionary new way to clean with heat!
SPECIFICATIONS
Pressure
Up to 1300 psi
Tank Construction
Stainless Steel
Shipping Dimensions
8 ¼”H x 24”L x 8 ¼”W
Power cord
50 ft. detachable
Electric Draw
14.2 amps
WARRANTY
Lifetime on stainless tank and rotationally-molded
housing, 2 years on parts and labor
The EDIC external heater system is the only one of its kind.
n Our exclusive “heat ready” system, available on the Galaxy, Galaxy Pro, and
select Galaxy 5 models, gives you the option of purchasing a machine without
heat and then adding the heater at any time.
n Ours is the only detachable heater on the market that mounts on the outside,
taking only seconds to attach or remove. Placing the heater on the outside has
another advantage — it insures everything on the inside of the machine runs
cooler, thereby extending the life of the pump and motors.
n The stainless steel tank and heating element eliminate galvanic corrosion and
clogs in the solution flow that can obstruct heat transfer.
n This system really heats up fast, delivering 210 degrees of heat in about 90
seconds. If a repair is necessary, just lift the heater off the back of the machine. It’s that simple! Our entire line of heated extractors has the heater system mounted on the outside
for greater longevity and ease of repair.
MODELS
605HR 2000 watt heater kit for Galaxy, GalaxyPro and selected Galaxy 5 Models
602HR 1200 watt Replacement heater for Galaxy series automotive units
THE CONVERTER
CIRCUIT LOCATOR
MODEL: 986CO
MODEL: 988CS- with 1 wall outlet plug and one twist-lock to fit EDIC equipment
MODEL: 989CS- with 2 wall outlet plugs
The Converter gives a standard carpet extractor the versatility
to be used as a dry vacuum. With a simple attachment, you get
the superior suction power of an extraction machine to more
thoroughly remove excess dirt and soil from carpets and floors.
Available for use with the Polaris, Supernova and Galaxy series.
Item #L11028 Paper Filter Bags, 6-pack.
So you’ve got two power cords and you need to find outlets
on different circuits? No problem! Just plug the circuit locator with an extension cord into two wall outlets — the sensor
instantly lights up when it’s good to go. Use it anytime for any
equipment. Prevents potential power overload by taking the
guesswork out of locating circuits.
BAZOOKA GUM REMOVER SYSTEM
Our patented gum removal machine lets you stand up while instantly
removing spot after spot of ground-in gum, sticky candy and adhesive
from carpets, hard floors and concrete. Complete with carpet brush.
MODELS
420AC Bazooka
High torque electric with 25-foot cord
422AC Bazooka Junior
421AC Bazooka Cordless Battery Powered
424AC Bazooka Jr. Cordless
Optional Brushes
F03472 Soft brush for carpet (blue)
F03473 Professional for carpet (brown)
F03474 Concrete brush (green)
BAZOOKA SPOT REMOVER
Item #N00901 (non-aerosol)
n 100% biodegradable, organic, citrus-
based solvent for use with the Bazooka.
n Case of 12 14-oz. cans.
18
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
GALAXY
AUTOMOTIVE
COMES STANDARD WITH HEAT!
Nothing beats these machines for getting at deeply imbedded dirt and
grime in auto upholstery and carpet and removing it for good! The winning combination is lots of heat plus high-performance vacuums for
squeaky-clean interiors and faster drying time. There are 2 basic models
to choose from: a single-cord unit with a 3-stage vacuum or a dual-cord
unit with dual 2-stage vacuums. All models come with our exclusive new
external heater that makes repairs a snap and keeps heat away from the
motor chamber, extending the life of the internal parts. The heater can
be removed in about 15 seconds if need be, and
the unit cleans with or without heat. The Galaxy’s
hi-tech design houses a large 12 or 17-gallon tank
inside a compact body for exceptional portability.
Comes complete with a vacuum and solution hose
assembly. Tools sold separately.
FEATURES
SPECIFICATIONS
n 1200 watt or 2000 watt in-line external heater delivering up to 200
degrees in just 90 seconds.
n All heaters tested to 2500 psi to insure quality operation in the severest
environments.
n Durable stainless steel heating chamber and heating element.
n Exclusive external heating system for easy removal and repair.
n External heater design removes heat from the motor compartment
keeping the vacuum motors and pump running cooler.
n Opens quickly like a clamshell for easy servicing.
n Powerful and lightweight – ideal for single operators.
n “No drip” motor cavity guarantees water spilled on the outside of
machine stays outside and won’t accumulate in the motor compartment.
Solution Tank
12/17 gallon
Recovery Tank
11/15 gallon
Solution Pressure
100 psi
Vacuum Motor
Single 3-Stage/Dual 2-stage
Water Lift
136”/136”/170”/170”
External Heater 1200/2000 watts
Detailer Tool
Stainless steel
Hose Assembly
15 ft./25 ft.
OPTIONAL ACCESSORIES
1038AC Stainless steel crevice tool
1035AC Stainless steel van tool
1039AC Stainless steel detailer tool
MODELS
3100BX-EH
3700BX-EH
3000VX-EH
3700VX-EH
12 gal., 1200W heater, 15-ft. hose assy.
17 gal., 1200W heater, 25-ft. hose assy.
12 gal., 2000W heater, dual cords, 15-ft. hose assy.
17 gal., 2000W heater, dual cords, 25-ft. hose assy.
Tank Construction
Polyethylene
Baseplate
1/4” Aluminum
Rear Wheels
10 inches
Casters
4 inches
Power Cord
50 ft. detachable
Dimensions
35”H x 31”L x 18”W
38”H x 31”L x 20”W
Weight
88 / 90 lbs.
Shipping Weight
110 / 117 lbs.
Ship Dimensions
36”H x 31”L x 19”W
40”H x 38.5”L x 21”W
Electrical Draw 17 /18/18 amps/16.5 amps per cord WARRANTY
Lifetime on rotationally-molded housing,
2 years on parts and labor
19
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
GALAXY 5
COMES STANDARD WITH HEAT!
The Galaxy 5 was designed for remarkable heat and power all housed
within an incredibly lightweight and portable package. The exclusive
external heater design, with stainless steel heating chamber and heating
element, delivers up to 170 degrees on demand. The unit can be operated
on a single power cord, which gives it the versatility to be used in a
variety of settings. The heater can be removed in about 15 seconds if a
repair is necessary, and the stainless steel heating chamber comes with
a lifetime guarantee. The Galaxy 5 is an obvious choice for auto detailing
and those jobs where a small yet powerful unit makes more sense. It’s
light enough for anyone to handle and the fold-down handle makes it a
snap to transport and store. We’ve also added an exclusive baffle system
for exceptionally quiet operation. The Galaxy 5 automotive unit comes
complete with a 15-foot vacuum and solution hose assembly. Tools sold
separately. SPECIFICATIONS
FEATURES
Solution Tank
5 gallon
Recovery Tank
4 gallon
Solution Pressure
100 psi
External Heater
1200 watts
Vacuum Motor
Single 3-stage
Water Lift
136”
Tank Construction
Polyethylene
Baseplate
Aluminum
Rear Wheels
7 inches, non-marking
Casters
2.5 inches
Power Cord
25 ft. detachable
Hose Assembly
15 ft.
Weight
57 lbs.
Shipping Weight
65 lbs.
Dimensions
24.5” H x 16”L x 28”W
Ship Dimensions
25”H x 17”L x 29”W
Electric Draw
18 amps
Single cord operation.
Exclusive 1200 watt external heating system for on
demand heat up to 170 degrees. Stainless steel heating element. Stainless steel heating chamber with lifetime warranty.
Opens quickly like a clamshell for easy servicing.
“No drip” motor cavity guarantees water spilled on the outside of machine
stays outside and won’t accumulate in the motor compartment.
n Exclusive EZ removable heater for quick service and no down time. n Silencer system for quieter operation. n Heating chamber tested to 2500 psi to insure quality. n Handle folds down for easy transport and compact storage.
n External heater design removes heat from the motor compartment keeping
the internal parts cooler.
n
n
n
n
n
n
OPTIONAL ACCESSORIES
1035AC Stainless steel van tool
1038AC Stainless steel crevice tool
1039AC Stainless steel detailer tool
WARRANTY
MODEL
Lifetime on rotationally-molded housing,
2 years on parts and labor
500BX-EH Single 3-stage vac, 1200-watt external heater,
15-foot hose assy.
20
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
BRAVO
SPOTTER
WITH HEAT!
The new 17-pound Bravo spotter delivers incredible efficiency and power in a deceptively
small package. No set up time—simply unload and begin cleaning immediately. Compact size
and maneuverability make it ideal for spotting and quick cleaning of small carpeted areas,
upholstery and auto interiors. Operators will appreciate the specially designed molded-in
holders that carry spray bottles, leaving the hands free. Over time it’s a winner
too, thanks to the upright-mounted vacuum motor and oversized recovery
tank that combine to insure longer motor life. The Bravo comes complete
with a vacuum and solution hose assembly. Tools sold separately.
SPECIFICATIONS
Solution Tank
3 gallon
Recovery Tank
3.5 gallon
Solution Pressure
55 psi
Vacuum Motor
2 stage, bypass
Water Lift
85”
Handle
Adjustable, 22-37”
Wheels
6 inches
Power Cord
25 ft.
FEATURES
n
n
n
n
Heater 1500 watts, stainless steel
Hose Assembly
8 ft.
High Heat
Long-nose, fully stainless steel tool
Weight
19 lbs.
Shipping Weight
27 lbs.
Dimensions
20.5”H x 15”L x 13”W
Ship Dimensions
23”H x 15”L x 13”W
Electrical Draw
15 amps
n
n
n
n
1500 watt, in-tank heater delivers 170 degree heat.
Unique molded-in holders carry spray bottles for greater ease.
Stainless steel heating element.
Large 6” wheels and an optional transport handle plus cord wrap
assembly make it a snap to wheel about.
Carry-along handle increases portability.
Small and light enough to carry with one hand.
Quickly opens up for easy servicing and repair.
Large porthole on solution tank allows easy access for odor-free maintenance of recovery tank.
OPTIONAL ACCESSORIES
WARRANTY
330ACH
1039AC
Lifetime on rotationally-molded
housing, 1 year on parts and labor
Single-jet wand, 10” wide
Stainless steel detailer tool
MODEL
300BH-HT Bravo with heat, hose assembly and transport handle
AQUA DRI
SPECIFICATIONS Portable Air Mover/Carpet Dryer (patents pending)
EDIC’s Aqua Dri hosts a series of exclusive features that put it far ahead of
the pack and make it indispensable for quick drying of carpet and hard floors.
The Aqua Dri’s unique body design makes it super easy to stack for storage or transport. There are two models to choose from: The standard unit
offers three-speed drying with a s! HP motor and 2400 CFM. The larger Aqua
Dri Pro offers three-speed drying with s! HP (2700 CFM) for the ultimate in
power. Both models can be easily
adjusted to four different positions
for drying auto interiors, carpets,
furniture, curtains, ceilings—you
name it!
MODELS
All models available with optional carpet clamp
3004AD
3005AD
Aqua Dri, !s HP, 9!s” fan
Aqua Dri Pro, !s HP, 10%k” fan
Housing
3004AD/3005AD
Polyethylene
Motor
!s HP/ !s HP
Speeds
3
Power
2400/2700 CFM
Electrical Draw
5.0 amps
Blower Fan
9 1/2” /10 5/8” diameter
Intake Screens
Open flow design
Height Adjustment
4 positions
Stackable
Yes
Kickstand
Included
Carpet Clamp
Optional
Power Cord
Dimensions:
3004AD
3005AD 25 ft.
18”H x 18#f “L x 17#k “ W
19#f “H x 20%k”L x 19!f” W
Weight
30/33 lbs.
Shipping Weight
36 lbs
Ship Dimensions
19”H x 19”L x18”W
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
21
AUTO DETAILING
ACCESSORIES
1033ACH Single Jet Wand, high pressure
1034ACH Dual Jet Wand, high pressure
1039AC
Stainless Steel Detailer Tool
1038AC
1035AC
Stainless Steel Stair Wand
DYNAMO
Stainless Steel Crevice Tool
WET/DRY VACUUM SERIES
12W/20W
These wet/dry vacuums have the power and capacity to tackle the really big jobs yet
are so quiet you can use them anywhere without interrupting the work environment. The
12-gallon model combines large capacity with ease of transportation and storage. The
20-gallon Dynamo is a powerhouse featuring dual motors and the popular Tip ‘N’ Pour
design for maximum performance. Both models come complete with a deluxe 8-piece
tool kit and are available with an optional front mount squeegee attachment for removing
large amounts of liquid fast. Optional HEPA filter is available on 12-gallon model. Choice
of Polyethylene or stainless steel tank.
FEATURES
SPECIFICATIONS
n 63dB for whisper quiet operation.
n Equipped with a dolly cart with large rear wheels for easy transport and greater stability.
n Includes high quality “drop-in” style cloth filter bag for maximum air flow.
n Paper filter bags available on both models plus optional HEPA filters on 12W.
n Powerful 1600-watt dual vac motors on 20W for ultimate suction.
n Two-piece metal wand along with full 1!s” accessory kit included.
n 8’ hose includes full 1.5” swivel connection system for easy handling and
operation.
n Easy water disposal with “Tip ‘N’ Pour” system on 20-gallon and hose
drain system on 12-gallon.
Tank
Capacity
Stainless Steel or Polyethelene
12/20 gallon
Motor
1200w, single vac, 1.9 HP
1600w, dual vac, 2 HP
CFM
114/192
Water Lift
100/80 inches
Power Cord
33 ft.
Noise Level
63dB
Casters
3 inches
Wheels
6 inches
Dolly
Polyethylene
Tool Kit
8-piece deluxe
OPTIONAL ACCESSORIES
Filter
Washable cloth
Paper Filter
Optional
HEPA Filter
Optional on 12W
335AC 336AC L11824-1 Front-Mount Squeegee Assembly (12-gal)
Front-Mount Squeegee Assembly (20-gal)
Paper Filter Bag
Hose
15 ft w/1.5” swivel connector
MODELS
Dimensions
33”H x 19”L x 19”W
36”H x 24”L x 20”W
Weight
30 lbs./48 lbs.
Shipping Weight
50 lbs./67 lbs.
Ship Dimensions
21” x 21” x 34”
22” x 25” x 39”
Optional HEPA filter available on 12-gallon models— add “H” to model number (12WH, 12WSH)
12W 12-gallon poly (with 8-piece deluxe tool kit)
12WS
12-gallon stainless steel (with 8-piece deluxe tool kit)
20W
20-gallon poly (with 8-piece deluxe tool kit)
20WS
20-gallon stainless steel (with 8-piece deluxe tool kit)
Electrical Draw
13/13/13/13 amps
WARRANTY
1 year on tank, 1 year on parts and labor
22
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUMS
ATLAS
(patents pending)
After years of careful planning, our new Atlas is taking the backpack vacuum market by storm. Feature for feature, it simply
defies the competition! It’s light enough for anyone to handle
and the ergonomically-designed Velcro straps at the chest and
hips result in a comfortable fit for virtually any sized operator. A
special slide adjustment hooks the shoulder straps together for
a higher range of motion. The on/off switch is at the hip level
and mounted on top for unparalleled ease of operation. Our
unique airflow design makes this unit quieter than most and the
baffled exhaust goes out the back, away from the operator, for a
higher level of comfort. The Atlas comes with our extraordinary
Ultrastat 3-ply composite filter treated with an anti-microbial
agent that provides exceptional airflow even
when full, allowing for greater productivity. This
exclusive bag is fitted with a durable plastic
rim for an airtight seal around the top, and
the seams are sonically welded (as opposed
to glued). The result is higher dust retention,
and a much longer filtration cycle.
TM
FEATURES
n Longer exhaust chamber and diffused exhaust air for quiet operation.
n EDIC Ultrastat™ filters have better filtration efficiency, greater dust
retention and longer useful life than Micro filter bags because
Ultrastat’s™ revolutionary synthetic material allows greater air flow
even when the bag is full.
n 3-Position hip adjustment for wider or narrower hips allows the unit
to sit more comfortably on the hips.
n Ergonomically designed harness with multi-adjustable settings for optimum comfort.
n Light-weight – only 10 lbs.
n Hip-mounted switch results in easy on/off.
n Precision-molded cloth filter bag rim holds it’s shape to prevent collapsing inside the unit when the bag is full.
n Optional Hepa filter available on 10-qt units.
n Available in 220-volt and in 400 cycles for the aviation industry.
MODELS
601TV
602TV
603TV
610TV
605TV 606TV
6-qt w/Standard Kit
6-qt w/Industrial Kit
6-qt w/Mixed Floor Kit
6-qt w/Powerbrush kit
6-qt w/Turbo Kit
6-qt w/Sidewinder Kit
1001TV 10-qt w/Standard Kit
1002TV 10-qt w/Industrial Kit
1003TV 10-qt w/Mixed Flr Kit
1010TV 10-qt w/Powerbrush Kit
1005TV 10-qt w/Turbo Kit
1006TV 10-qt w/Sidewinder Kit
Aviation Vac – add “A” to the end of any 6 or 10 qt model number.
220-Volt Vac – add “220V” to the end of any 6 or 10 qt model number.
Hepa-Filter-add ”H” to the end of any 10qt. model number.
SPECIFICATIONS
6 quart-HA
10 quart-HA
Watts
1356
1340
Amps
11.7
11.5
CFM
136
150
Waterlift
111
98
Filtration
4 stage
4 stage
Decibels
65
65
Thermally
protected
Yes
Yes
Construction
Roto mold
polyethelene
Roto mold
polyethelene
4-ft Static dissipating
hose with swivel cuffs
Included
Included
Power cord
50-ft extension
50-ft extension
5 Disposable
Ultrastat filters
Included
Included
Cloth Bag
Included
Included
Dimensions
8” x 8” x 23.5” 9” x 9” x 25”
Weight
9.8 lbs.
10.8 lbs.
Ship weight w/tools
22 lbs.
23.5 lbs.
Ship dimensions
13” x 13” x 32” 13” x 13” x 32”
TM
WARRANTY
2 years on rotationally-molded housing, 2 years on parts and labor
23
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
STANDARD TOOL KIT
MIXED FLOOR KIT
TURBO BRUSH KIT
361AC Kit includes carpet tool with
scallops, crevice tool, 2-pc “S” wand,
dust brush, 5” upholstery tool and
slide-on brush for upholstery tool.
362AC Kit includes Standard Tool Kit
plus 14” floor tool with horsehair brush.
363AC Kit includes turbo brush head, telescopic wand, curved wand handle,
crevice tool, dust brush, 5” upholstery
tool, and slide-on brush for upholstery tool.
SIDEWINDER KIT
INDUSTRIAL KIT
ELECTRIC POWER BRUSH KIT
364AC Kit includes 14”scalloped
capet tool, 2-pc aluminum straight
wand, and upholstery tool.
365AC Kit includes combo floor tool,
telescopic wand, curved wand handle,
crevice tool, dust brush, 5” upholstery
tool and slide-on brush for upholstery tool.
366AC Kit includes electric power brush,
telescopic wand, curved wand handle,
crevice tool, dust brush, 5” upholstery tool
and slide-on brush for upholstery tool.
FILTERS
The revolutionary new Ultrastat™ filters are made from
a high-efficiency synthetic composite treated with an
anti-microbial agent. They have greater dust retention,
better filtration efficiency and a longer useful life than a
standard Micro filter because they provide a much lower
pressure drop and therefore better CFM for longer periods of time. The Ultrastat™ filters are more durably constructed because the seams are sonically welded, as
opposed to glued, and the rim is made from a durable
plastic instead of cardboard.
Dome Filter
K12019 Ultrastat Filter
L12004 6-qt Ultrastat filter (set of 5)
L12006 10-qt Ultrastat filter (set of 5)
Case quantity: 100 filters
TM
TM
Cloth Filter
L12009
L12010
6-quart filter
10-quart filter
24
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
5.7” diameter
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.25” ACCESSORIES
G03510
G03509
K00700-14
K00700-15
K00700-16
10.5” Turbo brush
13” Electric Brush
11” Combo Floor Tool
12” Carpet Tool, Scalloped
12” Bare Floor Tool
K00728-4
K00704-1
K00704
K12036
K12036-1
5” Upholstery Tool
Dust Brush, Rectangular
Dust Brush, Round
Floor Duster
Replacement Floor Duster Head
K00707
K00728-4-1
D03387-1
Adapter, 1.5” to 1.25”
Brush Slide for K00728-4
Chrome Wand, Telescopic w/Cord Management
K00729-6
13” Crevice Tool
K00729-5
D00349-1
D03387
9” Crevice Tool
Curved Wand Handle with Swivel Connection
Telescopic Wand, Chrome
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES
K00700-1
K00700-2
K00700-3
14” Carpet Tool, Scalloped
14” Carpet Tool with Easy
Glide Brush
16” Carpet/Bare Floor Tool
with Adjustable Brush
K00700-4
11” Carpet/Bare Floor Tool
with Adjustable Brush
K00700-5
15” Carpet Tool, Scalloped
25
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES continued
K00700-7
K00700-8
14” Floor Tool
with Nylon Brush
14” Floor Tool
with Horsehair Brush
K00700-17
K00700-18
18” Carpet Tool Sidewinder
K00700-22
15” Carpet Tool Sidewinder
18” Floor Tool Sidewinder
with Nylon Brush
K00700-10
14” Floor Tool with Felt
K00700-19
18” Floor Tool Sidewinder
with Horsehair Brush
K00700-23
K00700-11
K00700-13
14” Floor Tool with Felt,
Scalloped
20” Floor Tool
with Nylon Brush
K00700-20 scalloped
K00700-21 standard
K00700-26
18” Floor Tool Sidewinder
with Felt
8” Carpet Tool Sidewinder
15” Carpet Tool Sidewinder
K00700-27
K00728-1
K00728-5
K00728-1-1
K00700-6
K00708-3
8” Floor Tool Sidewinder
with horsehair bristles
5” Upholstery Tool
5” Upholstery Tool,
Metal
Slide-on Brush for
K00728-1 and K00728-5
14” Carpet Tool,
Paddle
Dust Brush, Rectangular
with swivel neck
K00708-7
K00708-1
K00729-3
K00729-2
28” Crevice Tool
15” Crevice Tool
J12035
K11737
K00728-3
Dust Brush, Round, Metal
Dust Brush, Round
5” Auto Upholstery Tool
K00729-4
K00714-1
9.5” Crevice Tool
Pipe Cleaner, 1” to 4”
K00714-2
Pipe Cleaner, 4” to 8”
Hose Assy, Static Dissipating
26
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
Swivel Hose Cuff
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES continued/SPARE PARTS
D03386-2
D03386-1
D03386-7
Wand, Bulk Pick Up, 36”
“S” Bend Wand, Telescopic
D03386-6
D03386-8
Extension Wand, Telescopic
Aluminum Wand, Straight, 59”
Aluminum Wand, 2-PC
D03386
Aluminum Wand, 1-PC
D03386-10
Aluminum Extension Wand, 59”, Sidewinder
D12909
Aluminum Extension Wand, 30”, Sidewinder
D03386-9
Aluminum 2-pc Wand, Sidewinder
REPLACEMENT PARTS
K00700-3-1
K00700-4-1
16” Brush Strip for K00700-3
11” Brush Strip for K00700-4
D03386-1-1
Threaded Cap for D03386
K00700-10-1
K00700-7-1/K00700-9-1
14” Nylon or Horsehair Brush for K00700-7 or K00700-9
14” Felt Blade for K00700-10
D03386-1-2
Metal Ring for D03386
K00700-13-1
K00700-11-1
20” Brush Set
for K00700-13
14” Scalloped Felt Blade
for K00700-11
27
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO CANISTER VACUUM SERIES
DYNAMO
NEW!
CANISTER VACUUM SERIES
6W/9W
SPECIFICATIONS
6W/9W
Capacity
6/9 quarts
Motor
1050/1200 watts
CFM
105
Water Lift
100 inches
Electrical Draw
9/10.5 amps
Noise Level
62/59 decibels
Filtration
High/HEPA/ULPA
Power Cord
50 ft. detachable
Hose
8.5 ft.
Wheels
3” non-marking
Casters
2” non-marking
Switch guard
Yes
Tool kit
7-piece included
Tool Diameter
1.25 inches
Ship Dimensions
13.5”H x 14.5”L x 14.5”W
Weight
14/14.5 lbs.
Shipping Weightw/tools
23.5/24.5 lbs.
Safety Approval
UL/CSA
OPTIONAL ACCESSORIES
L13126 Paper Filter Bags, 6W, 10-pack
L13127 Paper filter bags, 9W, 10-pack
F7401680 Standard basket filter (9W only)
F7401681 Red HEPA basket filter (9W only)
F7401682 Blue ULPA basket filter (9W only)
F7700120 Standard cassette filter
F7700121 Red HEPA cassette filter
F7700122 Blue ULPA cassette filter
The Dynamo Canister is a go-anywhere, doanything vacuum with revolutionary features
that take practicality to a new level. Need HEPA
filtration? You got it! Need the noise level to be
so quiet workers can make phone calls without
being disturbed? You got it! Want one vacuum
for multiple jobs? You got it! Each model has its own unique features with
versatility and ease at the core. Both vacuums incorporate a unique, colorcoded filtration system that makes it simple to change from high filtration to
HEPA or even to ULPA depending on the job.
We recommend the 6-quart Dynamo for your
everyday cleaning needs, providing durability
and economy over the long haul. The 6W comes
with a lifetime internal filter, which results in a
dramatic reduction in long-term costs.
6W
9W
With its whisper-quiet decibel rating and remarkable filtration system, the 9W is the professional
choice for use in healthcare environments and
busy call centers. It features a double system of
color-coded filters that give you the option of
true high filtration, HEPA or ULPA filtration. An
EDIC exclusive feature on the 9W allows you to
switch the noise level down to a minimum, making it possible to vacuum even while employees
use the phone.
The Dynamo canister vacuum series delivers total ease of operation and
maintenance. A special indicator light lets you know immediately if the cord
or the outlet is defective. The 50-foot power cord is detachable and the
motor slides out for quick repairs. Filters can be swapped out in seconds to
meet individual job requirements. Each unit comes complete with a standard 3-stage filter set and a 7-piece tool kit.
MODELS
6W
9W
6-quart Dynamo with high filtration
9-quart Dynamo with high filtration
WARRANTY
1 Year on Parts and Labor
Easy motor access for quick repairs
Lifetime internal filter on 6W
28
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
7-piece tool kit
DYNAMO CANISTER VACUUM SERIES
DYNAMO
CANISTER VACUUM SERIES
6W/9W FEATURES
n Units can be turned on their side with the hose facing up for cleaning
hard-to-reach places.
n Unique indicator light lets you know if the power cord or the outlet is
defective for easy troubleshooting.
n Telescoping wand makes it easy to clean high ceilings and walls.
n Switch guard protects the unit from foot operation.
n Removable filters make it easy to switch from high filtration to HEPA or
ULPA depending on the job.
n Motor slides out and power cord is detachable for inexpensive, on-thespot repairs.
n Exclusive lifetime internal filter on the 6W dramatically reduces long-term
costs.
n Super low decibel rating on the 9W (59 decibels) plus exclusive noise
reduction switch for cleaning during regular work hours, even if someone
is on the phone.
n Special modular design with weight centered in the middle prevents unit
from tipping over.
FILTRATION SYSTEM
Our unique 3-stage filter system is designed for complete flexibility, allowing you
to choose the level of filtration to meet individual job requirements. The system
includes a paper dust bag, the internal filter and a cartridge blow out filter.
n High Filtration—99% of all dust particles up to 3 microns including sand, dust
mites, pollen, mite feces.
9W standard filter set
n HEPA Filtration—99.997% filtration at .3 microns including all of the above
plus red blood cells, bacteria, mite feces dust, yeasts and fungi, tobacco
smoke, virus
n ULPA Filtration—99.999% filtration at .1 microns for maximum cleanliness
including all of the above plus E. Coli and Staph bacteria.
PAPER FILTERS
Our paper vacuum bags are more than a dust container. They are a vital part of
the filtration system. The paper filter can be sealed completely before removing
for a truly clean air system.
6W standard filter set
29
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO WET/DRY VACUUM SERIES
DYNAMO
WET/DRY VACUUM SERIES
5W/8W
The new Dynamo series of wet/dry vacuums combines a
host of impressive features including whisper quiet operation and incredible suction power—at a price that flattens
the competition. The 5 and 8-gallon models are perfect for
small spills and pickups without the need to drag out more
cumbersome equipment. These models are compact for
easy transport and storage yet powerful enough for heavyduty commercial settings. A special
noise reduction design means you can
work anywhere, anytime without causing
a disturbance. An optional HEPA filter
is available with both models for threestage filtration. Choice of stainless steel
or polyethylene tank.
FEATURES
SPECIFICATIONS 5W/8W
Tank
Polyethelene
Stainless Steel or Capacity
5/8 gallon
Motor
100w, 2-stage, 1.5 HP
CFM
104
Water Lift
80 inches
Power Cord
33 ft.
Noise Level
60dB
Wheels
3” casters
Dolly
Polyethylene
Tool Kit
8 piece/ 8 piece deluxe
Filter
Cloth
Paper Filter
Optional
HEPA Filter
Optional
Hose
15 ft w/1.5” swivel connector
Dimensions
23”H x 16”L x 16”W 30”H x 16”L x 16”W
Weight
20 lbs./21 lbs.
Ship Weight w/tools
32 lbs./38 lbs.
Ship Dimensions
w/tools
25”H x 17.5”L x 17.5”W
32”H x 17.5”L x 17.5”W
Electrical Draw
13/13/13/13 amps
n
n
n
n
n
n
n
60dB for whisper quiet operation.
Equipped with a dolly cart for greater stability.
Includes high quality “drop-in” style cloth filter bag for maximum airflow.
Paper filter bags available plus optional HEPA filters.
2-stage motor with 86-inch lift provides powerful suction.
Two-piece metal wand along with full 1!s” accessory kit included.
8’ swivel hose includes connection system for easy handling and operation.
OPTIONAL ACCESSORY
L11824
Paper Filter Bag
MODELS
All models available with optional HEPA filter—Add “H” to model number (5WSH, etc.)
5W
5-gallon poly (with 8-piece tool kit)
5WS
5-gallon stainless steel (with 8-piece tool kit)
8W
8-gallon poly (with Deluxe 8-piece tool kit)
8WS
8-gallon stainless steel (with Deluxe 8-piece tool kit)
WARRANTY 1 years on housing,
30
1 year on parts and labor
8-piece tool kit
Deluxe 8-piece tool kit
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO WET/DRY VACUUM SERIES
DYNAMO
WET/DRY VACUUM SERIES
12W/20W
These wet/dry vacuums have the power and capacity to tackle
the really big jobs yet are so quiet you can use them anywhere
without interrupting the work environment. The 12-gallon model
combines large capacity with ease of transportation and storage.
The 20-gallon Dynamo is a powerhouse featuring dual motors
and the popular Tip ‘N’ Pour design for maximum performance.
Both models come complete with a deluxe 8-piece tool kit and
are available with an optional front mount squeegee attachment
for removing large amounts of liquid fast. Optional HEPA filter is
available on 12-gallon model. Choice of Polyethylene or stainless
steel tank.
Front-mount squeegee for
removing large volumes of water fast!
Tip ‘N’ Pour on 20-gallon
model for easy water disposal.
FEATURES
n 63dB for whisper quiet operation.
n Equipped with a dolly cart with large rear wheels for easy transport and
greater stability.
n Includes high quality “drop-in” style cloth filter bag for maximum air flow.
n Paper filter bags available on both models plus optional HEPA filters on 12W.
n Powerful 1600-watt dual vac motors on 20W for ultimate suction.
n Two-piece metal wand along with full 1!s” accessory kit included.
n 8’ hose includes full 1.5” swivel connection system for easy handling and operation.
n Easy water disposal with “Tip ‘N’ Pour” system on
20-gallon and hose drain system on 12-gallon.
OPTIONAL ACCESSORIES
335AC/336AC Front-Mount Squeegee Assembly
L11824-1 Paper Filter Bag
335AC (24”)
MODELS
Optional HEPA filter available on 12-gallon models—
add “H” to model number (12WH, 12WSH)
12W 12-gallon poly (with 8-piece deluxe tool kit)
12WS
12-gallon stainless steel (with 8-piece deluxe tool kit)
20W
20-gallon poly (with 8-piece deluxe tool kit)
20WS
20-gallon stainless steel (with 8-piece deluxe tool kit)
SPECIFICATIONS
12W/20W
Tank
Stainless Steel or Polyethelene
Capacity
12/20 gallon
Motor
1200w, single vac, 1.9 HP
1600w, dual vac, 2 HP
CFM
114/192
Water Lift
100/80 inches
Power Cord
33 ft.
Noise Level
63dB
Casters
3 inches
Wheels
6 inches
Dolly
Polyethylene
Tool Kit
8-piece deluxe
Filter
Washable cloth
Paper Filter
Optional
HEPA Filter
Optional on 12W
Hose
15 ft w/1.5” swivel connector
Dimensions
33.5”H x 20”L x 19”W
39”H x 26”L x 22”W
Weight
30 lbs./48 lbs.
Ship Weight w/tools
50 lbs./67 lbs.
Ship Dimensions
w/tools
34”H x 21”L x 21”W
39”H x 25”L x 22”W
Electrical Draw
13/13/13/13 amps
336AC (24”)
WARRANTY
1 year on housing, 1 year on parts/labor
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
31
UPRIGHT VACUUMS
RELIANT
Dual-Motor VACUUM NEW!
This powerful upright vacuum is designed with a dazzling list of features to
take cleaning to a new level. The dual motors and high filtration filter combine to handle tough commercial work environments. An onboard tool kit
with stretch hose and telescopic wand allows the operator to easily clean
those typically out-of-reach places like ceilings and baseboards. The brush
housing has a super low profile that makes it a piece of cake to clean under
desks and other obstacles, plus there’s a four-position brush height adjustment to handle any kind of carpet. And that’s only the beginning. All the
major parts of the Reliant can be taken apart without tools for easy repairs,
and it has a detachable power
cord with plugs on both ends for
easy replacement. The Reliant
comes complete with onboard
tools and is available with a 14 or
18-inch cleaning width.
Reliant comes standard with 4-piece tool kit
SPECIFICATIONS
Cleaning Path
14/18 inches
Decibels
67/70
Vacuum Motor
105 CFM
Capacity
6 liters (6.4 quarts)
Water Lift
78
Tool Kit
Included
Tool Diameter
Housing 1.25”
High Impact ABS
Power Cord
50 ft. detachable
Lighted indicator switch let’s you know
immediately if the power cord is defective
All major parts detach
easily for quick repairs
FEATURES
Electronic Indicators Bag full, belt breakage,
brush roll blockage, brush
pressure, airway blockage
Operation Control
All metal, dual on-off
Dimensions
Handle Up
47.5”H x 10”L(base) x 14”W 47.5”H x 10”L(base) x 18”W
Weight
20 lbs./22 lbs.
Shipping Weight
27 lbs./29 lbs.
Ship Dimensions
8.75”H x 37.5”L x 15.75”W
8.75”H x 37.5”L x 20.25”W
Electrical Draw
10 amps
n
n
n
n
n
n
Stretch hose has identical cuffs allowing you to change direction to
clean out any debris stuck in hose
Detachable power cord with plugs on both ends.
Lighted indicator switch that let’s you know if a cord is defective.
Full-bag sensor for motor protection.
Filter bag compartment only closes when bag is in place, to protect
motor from running without bag.
Powerful suction combines with wide cleaning width for cleaning large
areas quickly.
n Rotating cord hook means no need to unwind cord.
WARRANTY
MODELS
1 years housing, 1 year on parts and labor
1400R
1800R
14” Reliant w/tool kit
18” Reliant w/tool kit
32
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTOMATIC SCRUBBERS/GROUT RESTORATION
Pilot
Automatic Scrubber NEW!
Our amazing new automatic scrubber is ideal for deep cleaning of grouted pavers
and hard floors. The Pilot gives you all the performance of larger, more expensive
equipment but in a lightweight, compact size that’s super easy to operate and
store. At only 30 lbs, it’s simple to transport to any job site. The Pilot’s versatility
makes it perfect for routine maintenance or periodic deep cleaning, especially in
tight, obstructed areas such as restrooms or locker rooms.
The knockout punch of this machine is its rotary brushes. It features a pair of
high-speed counter-rotating circular nylon brushes with two levels of bristles that
deep-clean grout better than any cylindrical method. The
flexing action of the flared nylon bristles scrubs the most
difficult-to-clean mosaic tile and stone grouted floors with
truly amazing results. Superior urethane squeegee blades
allow one-pass cleaning or can be raised to double scrub for
restorative cleaning.
The Pilot is the perfect green machine where less is more! It does not require harsh detergents that can damage sensitive stone and grout surfaces. It uses less solution, works in
tandem with green chemicals and with its single motor, draws
less amps.
EDIC’s Pilot is user friendly and simple to operate and maintain. The recovery
bucket, tank, brushes, squeegee and power cord can be taken apart in seconds
to switch to other accessories. Optional nylo-grit brushes and pad holders can be
attached for surface polishing and stripping of any hard surface.
SPECIFICATIONS
Brush Motor
120V, 700 Watts
Vacuum Motor
Triple Fan System Cleaning Width
14 inches
FEATURES
Cleaning Capacity
4,200 sq. ft. per hour
n Unique dual counter-spinning rotary brushes (not cylindrical) with two levels
of bristles for a deep down clean that outperforms the competition.
n Unbeatable performance in a compact size—only 30 lbs!
n Does the job of heavier, more expensive equipment but can be stored in a
closet and is super easy to maneuver. It even fits on a maid’s cart.
n Low carbon footprint—cleans with green chemicals, uses less solution and
draws less power.
n Truly automatic—simply lower the handle to activate—no on/off switch!
n Comes complete with a high-quality squeegee that leaves floors clean and
completely dry.
n A total cleaning system that promotes clean and sanitized stone, tile and hard floors.
Squeegee
16 inches
Brushes (2)
Circular/nylon bristles
Brush Speed 550 RPM
Brush Pressure
18 lbs.
Solution Tank
1 gallon
Recovery Tank
1 gallon
Wheels (2)
4” non-marking
Power Cord
25 ft. detachable; 3 ft. pigtail
OPTIONAL ACCESSORIES
TU1501
TU1505
TU1301T
TU1700
F13130 F13131
F13132 4.5 amps, 115V
Standard Brush Set (2)
Pad Holder (2)
Nylogrit brushes (2)
Squeegee Assembly
Black Stripping Pad, 6.5” Green Scrub Pad, 6.5”
White Buffing Pad, 6.5”
Dimensions (Upright) 43.75”H x 20”L x 16”W
Weight
30 lbs. Shipping Weight
33 lbs. MODEL
Ship Dimensions
16”H x 23”L x 16.5”W
1400SC Pilot Automatic Scrubber
Electrical Draw
New Companion Product!
WARRANTY
1 year on parts and labor
Easy Mop bucketless cleaning system—Cleans
walls, ceilings, and other hard-to-reach places
with no spills, no mess. A pressurized all-inclusive
reservoir cleans up to 3,200 sq. feet per filling.
See page 14 for additional details.
33
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN HIGH SPEED
BURNISHERS
Available in traditional style or new 17” compact
design with fold-down handle!
SPECIFICATIONS
The Saturn burnishers make it simple to bring a smooth,
super high-gloss luster to any hard floor surface. Watching
these machines in action will make anyone a believer! The
perfect combination of weight and high speed produces
a spectacular finish in record time. Brand new to the
line-up is a 17” 2000 RPM model with a fold-down
handle and a special compressed design for the
ultimate in portability and storage plus greater
maneuverability in tight spaces. Our traditional 20” models are available in 1500 or
2000 RPM and both the
traditional and fold-down
models are designed with
an all-metal construction
including stainless steel
brush cover, making them
All Saturn floor machines are now
as durable as they are
available with an optional black
dependable. All models
powder-coated brush cover. All
the same great features as our
come complete with flexstainless steel models but at a
lock pad driver and more competitive price.
high-speed pad.
Brush Speed
17=2000 RPM
20=1500/2000RPM
Pad Diameter
17”/20”
Motor
1.5 HP
Gear Box
Multi-V belt
Power Cord
75 ft. yellow
Cord Strain Relief
Heavy-duty steel with
spring guard
Brush Cover
Stainless Steel
Handle Grips
Soft, anti-fatigue
Handle Chrome-plated steel
Wheels
5 inches
Bumper
Non-marking PVC
Operation Control
Dual trigger on-off safety switch, left or right hand
Weight
84/96 lbs.
MODELS
Shipping Weight
96/108 lbs.
Ship Dimensions
54”H x 31”L x 22.5”W
Electrical Draw
15/15/15 amps
20HS1500-SS 20” —1500 RPM High Speed
20HS2000-SS 20” —2000 RPM High Speed
17HS2000F-SS 17” —2000 RPM Fold-Down
FEATURES
n Multi-V belt drive reduces load on bearings and extends motor life.
n Smooth operation for reduced operator fatigue.
n Unique lockout system prevents accidental start-ups and allows machine to
be activated with both hands on the grips.
n All-metal chassis plus stainless steel cover assure long life and dependability.
n New 17-inch model folds-down for super easy storage and transportation.
n Cool running 1.5 HP high efficiency motor.
n Rear transport wheels for easy turning and increased mobility.
n Easy motor access for quick servicing.
n 75-foot power cord.
WARRANTY
Lifetime on stainless brush cover, 3 years on parts and labor
34
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN
DUAL SPEED FLOOR MACHINES
Get more bang for your buck with one machine that does the work
of two! Strip, scrub, spray-buff, polish, shampoo, bonnet clean…
you name it, this machine does it all! Designed for professional
floor care maintenance, the dual speed floor machines from EDIC
are equipped with long-wearing steel triple planetary gearboxes,
providing heavy duty yet quiet operation. Safety comes first with
the exclusive “lockout” lever that allows the motor to be activated
while keeping both hands on the handle grips. Use the lower
speed to scrub and strip then just flip the switch to high speed and
polish floors to a glossy luster. Operation is smooth and easy in
even the toughest commercial settings.
FEATURES
n All-metal construction with stainless steel brush cover, heavy
duty chrome-plated steel handle and 66 frame motor assure
durability.
n All steel triple planetary gearbox provides heavy duty yet quiet
operation.
n Turn a 17-inch machine into a 20” machine, or vise versa, by
removing just four bolts.
n Dual trigger negative pressure switch allows operator to run with
either hand.
n Safe two-handed start-up with exclusive “lockout lever”.
n Cool running 1.5 HP high efficiency motor.
n 50-foot power cord.
n Non-marking PVC bumper prevents marks on walls and furniture.
n Available in 17” or 20” diameter.
OPTIONAL ACCESSORIES
1601/1901BR
1603/1903BR
Pad Driver, with molded-in clutch plate
Two-Piece Pad Driver
All Saturn floor machines are now available with an
optional black powder-coated brush cover. All the same
great features as our stainless steel models but at a more
competitive price.
SPECIFICATIONS
Brush Speed
Dual 180/320 RPM
Diameter
17” or 20”
Motor
1.5 HP/66 Frame
Gear Box
Steel triple planetary Power Cord
50 ft. yellow
Cord Strain Relief
Heavy-duty steel with
spring guard
Brush Cover
Stainless Steel
For a complete listing of pad drivers, brushes and accessories, see page 33
Handle Grips
Soft, anti-fatigue
MODELS
Handle Chrome-plated steel
Wheels
5 inches
Bumper
Non-marking PVC
Operation Control
All metal, dual on-off Weight
86/92 lbs.
Shipping Weight
106/112 lbs.
Ship Dimensions
48”H x 26.5”L x 23”W
Electrical Draw
14.4/14.4 amps
17DS3-SS
20DS3-SS
17” —180/320 RPM Dual Speed
20” —180/320 RPM Dual Speed
WARRANTY
Lifetime on stainless brush cover, 3 years on parts and labor
35
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN
LOW SPEED FLOOR MACHINES
No job is too tough for this rugged series of floor machines from EDIC. With its allmetal construction and steel planetary gear boxes, the Saturn can stand up to the
heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed
models are built specifically to handle the stress associated with stripping and
scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets. Features like the quick and easy handle adjustment, anti-fatigue design,
and the exclusive “lockout lever” for safe
two-handed start up make this machine
operator friendly and a winner in every
commercial setting. Available in six different models, there is a perfect low
speed Saturn for any size job.
All Saturn floor machines are now available with
an optional black powder-coated brush cover.
All the same great features as our stainless steel
models but at a more competitive price.
FEATURES
SPECIFICATIONS
Brush Speed
175 RPM
n All-metal construction assures durability.
n All-steel triple planetary gearbox provides heavy duty yet quiet operation.
n Dual-trigger negative pressure switch allows operator to run with either hand.
n Turn a 13-inch machine into a 20” or any other combination, by removing
just four bolts.
n Exclusive “lockout lever” is designed so operator can safely activate motor
with both hands on the grips.
n Wide-gripping handle locking mechanism guarantees a tight lock and
smooth adjustment.
n Non-marking PVC bumper prevents marks on walls and furniture.
Pad Diameter
13”, 17” or 20”
Motor
13” = .5 HP/1 HP
17” = 1 HP/1.5 HP
20” = 1 HP/1.5 HP
Gear Box
.5 HP/1.0 HP—dual planetary
1.5 HP—triple planetary Power Cord
50 ft. yellow
Brush Cover
Stainless Steel/Powder Coated
Handle Grips
Soft, anti-fatigue
Handle Chrome-plated steel
Wheels
5 inches
Bumper
Non-marking PVC
Operation Control
All metal, dual on-off
Weight
13” (.5/1 HP) — 91 lbs.
17” (1/1.5 HP) — 95 lbs.
20” (1/1.5 HP) — 98 lbs.
For a complete listing of pad drivers, brushes and accessories, see page 33
Shipping Weight
13” — 101 lbs.
17” — 112 lbs.
20” — 115 lbs.
Stainless Steel
Black Powder Coated
Ship Dimensions
48”H x 26.5”L x 23”W
13LS1-SS/13LS2-SS
17LS2-SS/17LS3-SS
20LS2-SS/20LS3-SS
—
17LS3-BK 17” 1.5 HP
20LS3-BK 20” 1.5 HP
Electrical Draw
8.4/13.2 • 13.2/14.4 • 14.4/14.4 amps
OPTIONAL ACCESSORIES
390AC
1601BR/1901BR 1603BR/1903BR Shampoo tank for carpets
Pad Driver with molded-in clutch plate
Two-Piece Pad Driver
MODELS All Models 175 RPM
13” .5 HP/ 13” 1 HP
17” 1 HP/ 17” 1.5 HP
20” 1 HP/20” 1.5 HP
WARRANTY
Lifetime on stainless brush cover, 3 years on parts and labor
36
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
ACCESSORIES
PAD DRIVERS
1202BR
1601BR 1603BR
1901BR
1903BR
1704BR
2004BR
F11988
12” Block, 13” machine
16” Block, 17” machine
Molded-in clutch plate
16” Block, 17” machine
19” Block, 20” machine
Molded-in clutch plate
19” Block, 20” machine
Flex-lock, 17” Hi-speed
Flex-lock, 20” Hi-speed
High Speed Pad
1601BR
2004BR
1505BR
1106BR
1506BR
1807BR
BRUSHES
1105BR
1505BR
1805BR
1106BR
1506BR
1806BR 1107BR*
1507BR*
1807BR*
Nylon 11” Block, 13” machine Nylon 15” Block, 17” machine Nylon 18” Block, 20” machine
Poly 11” Block, 13” machine Poly 15” Block, 17” machine Poly 18” Block, 20” machine Grit 11” Block, 13” machine
Grit 15” Block, 17” machine
Grit 18” Block, 20”machine
*Grit Brushes are available in the following 4 grades:
#1 Heavy Grit—Equivalent to high pro stripper pad
#2 Medium—Equivalent to black or brown pad
#3 Lite—Equivalent to green or blue pad
#4 Extra Lite—Equivalent to red pad
SHAMPOO TANK
390AC
Shampoo Tank
4-gallon capacity with brass valve
F11988
13” Saturn with Shampoo Tank
37
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SPARE PARTS - BRASS FITTINGS
BRASS FITTINGS
Barb Fitting
w/Female Pipe
Close Nipple
A00055
A00111
!k MP
!f MP
A00061
A00111
Nipple
A00160
A00163
Hex Reducing Nipple
A00161 !fFP x !fFP x !fFP
A00121
A00172
!k MP x !k FP
A00122
A00121
!k MP x !f FP
!f MP x !f FP
A000161
Street Tee
A00135 !k MP x !k FP x!k FP
A11589 !fMP x !fFP x !fFP
45° Elbow Street
A00053-18 !k MP x !k FP
A00053 !f MP x !f FP
A00053-38 #k MP x #k FP
Bushing
A00168-18 !f MP x !k FP
A00168 #k MP x !f FP
A00168-2 !s MP x #k FP
Teflon Tape
!f BARB x !k MP
!f BARB x !f MP
#k BARB x !k MP
#k BARB x !f MP
#k BARB x #k MP
!s BARB x !f MP
S00883 1/2 x 520 90° Elbow Female
A00073
A00154
Barb Fitting
w/Male Pipe
A00135
A00053
A00168
A00060
A00075
Adapter--Male Pipe X
Female Pipe
A00119 #k MP x !f MP
A00114B !f MP x !k MP
A00076
A00139
A00077
A00060
A00062
A90004
!f BARB x !k FP
!f BARB x !f FP
!f BARB x #k FP
#k BARB x !f FP
#k BARB x #k FP
A00152 !kMP x !kFP x !kFP
A00075 !fMP x !fFP x !fFP
Female Tee
!f x 2
!f x 3
A00160
A00114B
A00066 A00067 A10749
A00061
A00072
Male Branch Tee
!k FP x !k FP
!f FP x !f FP
S00883
A00154
90° Elbow Street
A00116
A00052
!k MP x !k FP
!f MP x !f FP
A00052
38
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SPARE PARTS - HOSE CUFFS
HOSES/CUFFS
J00630
J00616-15
Hose Connector
Vacuum Hose Crush Proof
J00620-1
J00616
J00616-15
J00616-25
J00616-50
J00630
1!f” Gray
1!s” Gray
1!s” x 15’ w/cuffs
1!s” x 25’ w/cuffs
1!s” x 50’ w/cuffs
Hose connector 1!s” barb to 1!s” barb
J00596, J11154, J00613, J00580
Solution Hose
J00647
Hose Cuffs
To fit wire supported hoses
J00633 Straight 1!s” gray
J00645 Straight 1!f” gray
J00647 Expanding 1!f” hose to 1!s” cuff
J12035
Static Dissipating Hose
J12035
1!s” Black, 4 ft. long
Hose Assemblies
1041AC
1040AC
1040AC-HP
2541AC
2540AC
2540AC-HP
J00618
Vacuum Hose Wire Supported
J00618-1
J00618
1!s” Gray
2” Gray
Vac/sol hose assy,
15 ft w/adapter plate for
Polaris/Supernova
Vac/sol hose assy, 15 ft
Vac/sol hose assy, 15 ft,
high pressure, high heat
Vac/sol hose assy,
25 ft w/adapter plate for
Polaris/Supernova
Vac/sol hose assy, 25 ft
Vac/sol hose assy, 25 ft,
high pressure, high heat
J00596
J00595
J11154
J00613
J00580
00604-15A
00604-25A
00604-50A 00604-15HPA
00604-25HPA
00604-50HPA
!f” clear braided
#k” clear braided
#k” clear, wire reinforced
#k” gray or black Synflex
!f” Blue Neptune
#k” x 15’ w/fittings, gray or
black Synflex
#k” x 25’ w/fittings, gray or black Synflex
#k” x 50’ w/fittings, gray or black Synflex
15’ Hi press. w/fittings, Blue Neptune
25’ Hi press. w/fittings, Blue Neptune
50’ Hi press. w/fittings, Blue Neptune
5040AC
Vac/sol hose assy, 50 ft
5040AC-HP Vac/sol hose assy, 50 ft,
high pressure, high heat
J00625
Hose Cuffs
To fit crush proof hoses
J00626-1
1!f” gray
J00625
1!s” gray
J11029
1!s” black
J00579
Expanding 1!s” hose to 1!s” cuff
J00627
Reducing 2” hose to 1!s” cuff
1044AC
1045AC
1049AC
1048AC
Hose bag, large, vinyl
Hose bag, small, vinyl
Hose bag, large, mesh
Hose bag, small, mesh
39
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SPARE PARTS - PUMPS/VAC MOTORS
PUMPS/VAC MOTORS
G11164
G10763
250 psi Pump
G03523-1 Pressure Regulator
for G11164 & G11837 pumps
G00537
Blue Spring
GS Electric Vacuum Motors
G00537
for G03523-1
regulator
(250 psi pump)
2-stage, 82” water lift, 120V, 5.7” FR, 093, 6!s” overall height
G11837 Silver Spring
for G03523-1
regulator
(500 psi pump)
500 psi Pump
G00520-1 2-stage, 106” water lift, 120V, 5.7” FR, 096, 7” overall height
G02522L
G00513-100
Shurflo Pumps
G10763
60 psi bypass, 115V, Viton Seals
G11015
Viton Seal Repair Kit
G00513-100 100 psi demand, 115V, Viton Seals
3-stage, 135” water lift, 120V, 5.7 FR, 0396, 8 1/3” overall height
G13102
500 psi Pump
G13132 200 psi Pump
G13154 Pressure Regulator
(500-1000 psi)
for G13102 - 500 psi pump
G00513-101 Valve Assy
G00513-103 Switch Assy
G11234
150 psi demand, 115V, Viton Seals
G11234-1
Valve Assy
G11234-2
Switch Assy
G02517-1
Lamb Vacuum Motors
G00513F-100
Flojet Pumps
G00513F-100 100 psi demand,
115V, Viton seals
G11689
55 psi oscillating,
115V, Viton seals
G00537-1
2-stage, 82” water lift, 120V, 5.7 FR, 6 !s” overall height, Lamb #116905-43
G00520-1L
2-stage, 106” water lift, 120V, 5.7 FR, 7” overall height, Lamb #116754-13
G02517-1
3-stage, 117” water lift, 120V, 5.7 FR, 7 13/16” overall height, Lamb #116698-13
G02522L
3-stage, 135” water lift, 120V, 5.7 FR, 8 1/3” overall height, Lamb #116765-13
G02511
2-stage, 96” water lift, 120V, 5.7 FR, Lamb #116884-49
G13133 Pressure Regulator
for 200 psi pump (G13132)
E11169
Motor Gasket
G12003 Backpack Vacuum
Motor-High Air Flow
98” Waterlift, 120V,
5.7” FR, 5” overall height
40
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SPARE PARTS - SPRAY TIPS
SPRAY TIPS/QUICK DISCONNECTS
Brass Vee Jets
1/4” Male Pipe
A00086
A00086
A00086-1
A00086-2
A00086-3
A00086-4
A00086-5
A00092-4
A00092-8
A00092
A00093-2
A00093-1
A00093
110° 11008 110° 11004
110° 11010
110° 11003
110° 110015
110° 11006
95° 9504
95° 9508
95° 9510
80° 8004
80° 8008
80° 8010
Tee Jet Cap
A00089
110° 11001
110° 110015
110° 11002
110° 11006
110° 11004
110° 11008
110° 11003
110° 11010
95° 9505
95° 9504
95° 9508
95° 950050
A00102
A00094D
Tee Jet Body
A00103-1
A00094C
A00108
A00102
A00101
!k Female x !k FP
!f Female x !f FP
%k Female x %k FP
Special Male Quick
Disconnect
A00094C Tee Jet Body f! M Tee Jet Strainer/
Checkvalve
A00157 !k Male x !f MP
A00103-1 !f Male x !f MP
Special Female Quick
Disconnect
A00094B Tee Jet w/
strainer & checkvalve
Brass Vee Jets
1/8” Male Pipe
A00089-1
A00089-2
A00089
A00089-6
A00091
A00091-1
A00091-2 A00095-8 A00087
A00089-5
A00089-3
A00089-7
Standard Female
Quick Connect
Coupling
A00094D Tee Jet Cap
A00109
!k Female x !k FP
A00109
A00094B
1/4” Flood Jet
A00095-9 !f MP K2
A00095-9
1/8” Flood Jet
A00095-5
A00095-4
A00095-5
A00095-6
A00095-7
!k MP K1.5
!k MP K2
!k K 3
!k K 5
TeeJet Tip Only
A00094A
A00094A-1 110° 11010
A00094A-13 110° 11004
A00094A-15 110° 11006
A00094A-7 110° 11008
A00094A-14 95° 9510
A00094A
80° 8002
A00094A-2 80° 8001
A00094A-5 80° 8010
Standard Male Quick
Connect Coupling.
A00104
A00107
A00104
A00105
!k Male x !k FP
!f Male x !f FP
#k Male x #k FP
41
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SPARE PARTS - MISC. PARTS
VALVES, CLAMPS, CORDS, STRAIN RELIEFS, SWITCHES, MISC. EXTRACTOR PARTS
G00525
00525A
Valve only
Up to 100 psi
J00640
7/32 — 5/8
J00651
1/4 — 5/8
J11508
7/16 — 7/8
J90002
9/16 — 11/16
J00639
15/8 — 27/16
J00642
29/16 — 37/16
00525A Valve w/lever
D00352-1 Lever only
J90002
G00526-1 Valve, brass, Glidemaster,
Up to 1000 psi
G00526-1
D03424
D00364
B11199
K00665-1
Plastic w/locknut
B11504
Metal w/locknut
G00531
Switches/Rectifier
B00213 Toggle, SPST
B00229 Toggle, DPST
B02211-1 Green Rocker
B11465 Pushbutton, DPST
B02229 25 Amp Bridge rectifier
M00843-1 6 Amp Bridge rectifier
B00188 Black rocker
B00213
Drain Valve/
Strainers/Hose
Adapter
K00709
B11199
G11943 5” dia, !s” bore, hard rubber
G11765
7” dia, !s” bore, non-marking
G10458 7” dia, .375” bore, non-marking
G02514 8” dia, !s” bore, non-marking
G11767 10” dia, !s” bore, non-marking
G11943
81033AC Grip Handle, stainless
D00373
Wheels
11504A
Wand Handle Grips
K00711
K00710
E00427
G00532
Valve Clamp
D00364
D00364-1
D03424
81033AC
G00532 2” swivel, #k” stud
G00531 3” swivel, plate
G03518 4” swivel, plate
Strain Relief
Lever, Glidemaster
D00364-1 Lever,
aluminum
Casters
Hose Clamps,
Stainless
Valves
K00711
K00710
E00427
Drain Valve black
Gasket 2” OD x !k”
D00373
K00709 Inlet Filter !f NPT
Inline Strainer B11465
w/bowl Black Elbow B02211-1
G10458
G11767
Power Cords
B10719power cord, 25’ yellow, 16/3,
SJTW
B11487
K00709-1 Screen, Inline Strainer
K00709-3 Gasket, Inline Strainer
B02229
K00665-1 Hose intake adapter
K00709-3
M00843-1
B11487power cord, 50’, yellow, 14/3,
STW, 600V
Jacket, floor
machines
B11900power cord, 75’,
yellow, 12/3
SJTW, floor
machines
B11769extension cord,
50’, yellow,
12/3, STW
with twist lock
B00188
42
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
B11944extension cord,
50’, yellow,
16/3, SJTW for
Atlas Backpack

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project