Data Sheet ARUBA 103 SERIES ACCESS POINTS

Data Sheet ARUBA 103 SERIES ACCESS POINTS
DATA SHEET
ARUBA 103 SERIES
ACCESS POINTS
Cost effective dual-band coverage in mediumdensity enterprise Wi-Fi environments
Multifunctional and affordable Aruba 103 series
wireless access points (APs) maximize mobile
device performance in medium-density Wi-Fi
environments while minimizing interference from
cellular networks.
These compact and cost-effective APs deliver wireless
BEST-IN-CLASS RF MANAGEMENT
data rates up to 300 Mbps per radio employing 802.11n
All Aruba APs include Adaptive Radio Management™
technology with two spatial MIMO streams.
technology, which is essential to creating the most reliable,
The AP-103 and Instant IAP-103 models feature a 2.4-GHz
high-performance WLANs. ARM™ manages the 2.4-GHz and
and a 5-GHz radio, each with 2x2:2 MIMO and two integrated
5-GHz radio bands to optimize Wi-Fi client performance and
dual-band omni-directional downtilt antennas.
ensures that APs stay clear of RF interference.
ADVANCED CELLULAR COEXISTENCE (ACC)
Aruba 103 series APs can be configured to provide parttime or dedicated air monitoring for spectrum analysis
Aruba’s Advanced Cellular Coexistence (ACC) feature
and wireless intrusion protection, VPN tunnels to extend
enables WLANs to perform at peak efficiency by minimizing
remote locations to corporate resources, and wireless mesh
interference from 3G/4G LTE networks, distributed antenna
connections where Ethernet drops are not available.
systems and commercial small cell/femtocell equipment.
WI-FI CLIENT OPTIMIZATION
CHOOSE YOUR OPERATING MODE
Aruba 103 series APs offer a choice of operating modes
To eliminate sticky client behavior while users roam, the
to meet your unique management and deployment
Aruba 103 series APs feature Aruba’s patented ClientMatch™
requirements.
technology, which continuously gathers session performance
metrics from mobile devices.
• Controller-managed mode. When managed by Aruba
Mobility Controllers, the AP-103 offers centralized
If a mobile device moves away from an AP or if RF
configuration, data encryption, policy enforcement and
interference impedes performance, ClientMatch
network services, as well as distributed and centralized
automatically steers the device to a better AP.
traffic forwarding. Please refer to the Aruba Mobility
QUALITY OF SERVICE FOR LYNC
Controller data sheets for more details.
• Aruba Instant™ mode. In Aruba Instant mode, a
Aruba 103 series APs additionally support priority handling
single IAP-103 automatically distributes the network
and policy enforcement for individual Microsoft Lync media
configuration to other Instant APs in the WLAN. Simply
on the same device, including encrypted videoconferencing,
power-up on Instant AP, configure it over the air, and
voice, chat and desktop sharing.
plug in the other APs – the entire process takes about
five minutes.
DATA SHEET
ARUBA 103 SERIES ACCESS POINTS
For large installations across multiple sites, the Aruba Activate™
service significantly reduces deployment time by automating
device provisioning, firmware upgrades, and inventory
management. With Aruba Activate, Instant APs are factoryshipped to any site and configure themselves when powered up.
If WLAN and network requirements change, a built-in
migration path allows Aruba Instant APs to become part of a
WLAN that is centrally managed by a Mobility Controller.
ADVANCED FEATURES
• Spectrum analysis
--Capable of part-time or dedicated air monitoring, the
spectrum analyzer remotely scans the 2.4-GHz and
5-GHz radio bands to identify sources of RF interference
• Security
--With an OpenDNS service subscription, Aruba Instant
RAPs deliver integrated web filtering, malware and botnet
protection to every device connected to the WLAN
--Integrated Trusted Platform Module (TPM) for secure
storage of credentials and keys
--SecureJack-capable for secure tunneling of wired
Ethernet traffic
OPERATING MODES
• 802.11a/b/g/n Aruba Instant AP
• 802.11a/b/g/n Mobility Controller-managed AP
• Air monitor (AM) for wireless IDS, rogue detection
and containment
• Available channels: Dependent on configured
regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
--802.11b: Direct-sequence spread-spectrum (DSSS)
--802.11a/g/n: Orthogonal frequency-division
multiplexing (OFDM)
• Supported modulation types:
--802.11b: BPSK, QPSK, CCK
--802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum (aggregate, conducted total) transmit power
(limited by local regulatory requirements):
--2.4-GHz band: +21 dBm (18 dBm per chain)
--5-GHz band: +21 dBm (18 dBm per chain)
• Advanced Cellular Coexistence (ACC) minimizes
interference from cellular networks
• Maximum ratio combining (MRC) for improved
receiver performance
• Cyclic delay/shift diversity (CDD/CSD) for improved
downlink RF performance
• Short guard interval for 20-MHz and 40-MHz channels
• Space-time block coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput
• Supported data rates (Mbps):
• Spectrum analyzer
--802.11b: 1, 2, 5.5, 11
• Secure enterprise mesh
--802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• Remote AP (RAP) when used with a Mobility Controller
--802.11n: 6.5 to 300 (MCS0 to MCS15)
WIRELESS RADIO SPECIFICATIONS
• AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2
• Software-configurable dual radio supports 5-GHz (Radio 0)
and 2.4-GHz (Radio 1)
• 2x2 MIMO with two spatial streams and up to 300 Mbps
wireless data rate
• Supported frequency bands (country-specific
restrictions apply):
--2.4000 to 2.4835 GHz
--5.150 to 5.250 GHz
--5.250 to 5.350 GHz
--5.470 to 5.725 GHz
--5.725 to 5.850 GHz
• Support for up to 255 associated client devices per radio,
and up to 16 BSSIDs per radio
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
POWER
• Maximum power consumption: 9.5W (POE) or 8W (DC)
• Power sources sold separately
• Direct DC source: 12 Vdc nominal, +/- 5%
• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or
802.3at-compliant source
ANTENNAS
• Two integrated dual-band downtilt omni-directional
antennas for 2x2 MIMO with maximum antenna gain of
4.0 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas
are optimized for horizontal ceiling mounted orientation
of the AP. The downtilt angle for maximum gain is
approximately 30 degrees.
DATA SHEET
ARUBA 103 SERIES ACCESS POINTS
OTHER INTERFACES
• 10/100/1000BASE-T Ethernet network interface (RJ-45)
REGULATORY
• FCC/Industry of Canada
--Auto-sensing link speed and MDI/MDX
• CE Marked
--802.3az Energy Efficient Ethernet (EEE)
• R&TTE Directive 1995/5/EC
--PoE-PD: 48 Vdc (nominal) 802.3af PoE or 802.3at PoE+
• Low Voltage Directive 72/23/EEC
• DC power interface, accepts 1.7/4.0-mm center-positive
circular plug with 9.5-mm length
• Serial console interface (proprietary; optional adapter
cable available)
• Visual indicators (LEDs):
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1 and EN 60601-1-2
--Power/system status
For more country-specific regulatory information and
--Ethernet link status (ENET)
approvals, please see your Aruba representative.
--Radio status (two; RAD0, RAD1)
• Kensington security slot
• Reset button
MOUNTING
• Included with AP:
--Mounting brackets (2) for attaching to 9/16-inch or
15/16-inch T-bar drop-tile ceiling
• Spare mounting kit:
--AP-220-MNT-C1: Aruba AP mount kit contains two
ceiling-grid rail adapters for flat rails
• Optional mounting kits:
--AP-220-MNT-C2: Aruba AP mount kit contains two
ceiling-grid rail adapters for Interlude and Silhouette
style rails
--AP-220-MNT-W1: Aruba AP mount kit contains one basic
flat-surface wall/ceiling mount bracket
--AP-200-MNT-W2: Aruba AP mount kit contains one
secure flat-surface wall/ceiling mount cradle
MECHANICAL
• Dimensions/weight (unit, excluding mount accessories):
--150 mm (W) x 150 mm (D) x 41.5 mm (H)
--5.9” (W) x 5.9” (D) x 1.63” (H)
--300 g (0.66 lbs)
• Dimensions/weight (shipping):
--192 mm (W) x 178 mm (D) x 68 mm (H)
--7.6” (W) x 7.0” (D) x 2.68” (H)
--500 g (1.10 lbs)
ENVIRONMENTAL
• Operating:
--Temperature: 0° C to +40° C (+32° F to +104° F)
--Humidity: 5% to 95% non-condensing
• Storage and transportation:
--Temperature: -40° C to +70° C (-40° F to +158° F)
REGULATORY MODEL NUMBER
• AP-103 and IAP-103: APIN0103
CERTIFICATIONS
• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi Alliance (WFA) certified 802.11a/b/g/n
WARRANTY
• Limited lifetime warranty
MINIMUM SOFTWARE VERSIONS
• ArubaOS™ 6.4.0.0
• Aruba InstantOS™ 4.1.0.0 (planned availability mid 2014)
DATA SHEET
ARUBA 103 SERIES ACCESS POINTS
RF PERFORMANCE TABLE
Maximum transmit power (dBm)
per transmit chain
Receiver sensitivity (dBm)
per receive chain
2.4 GHz
802.11b
1 Mbps
18.0
-93.0
11 Mbps
18.0
-91.0
6 Mbps
18.0
-88.0
54 Mbps
16.0
-76.0
MCS0/8
18.0
-88.0
MCS7/15
14.0
-73.0
MCS0/8
18.0
-86.0
MCS7/15
14.0
-70.0
802.11g
802.11n HT20
802.11n HT40
5 GHz
802.11a
6 Mbps
18.0
-92.0
54 Mbps
16.0
-76.0
MCS0/8
18.0
-92.0
MCS7/15
14.0
-73.0
MCS0/8
18.0
-89.0
MCS7/15
14.0
-69.0
802.11n HT20
802.11n HT40
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.
DATA SHEET
ARUBA 103 SERIES ACCESS POINTS
ARUBA AP-103 AND IAP-103 ANTENNA PATTERN PLOTS
Horizontal or Azimuth plane (top view)
2.450 GHz
5.550 GHz
Elevation plane (side view, 0 degrees angle)
2.450 GHz
5.550 GHz
Elevation plane (side view, 90 degrees angle)
2.450 GHz
5.550 GHz
DATA SHEET
ARUBA 103 SERIES ACCESS POINTS
ORDERING INFORMATION
Part Number
Description
AP-103 Series Access Points
AP-103
Aruba AP-103 Wireless Access Point, 802.11n, 2x2:2, dual radio, integrated antennas
IAP-103-RW
Aruba Instant IAP-103 Wireless Access Point, 802.11n, 2x2:2, dual radio, integrated antennas – Restricted
regulatory domain: Rest of world
IAP-103-US
Aruba Instant IAP-103 Wireless Access Point, 802.11n, 2x2:2, dual radio, integrated antennas – Restricted
regulatory domain: United States
IAP-103-JP
Aruba Instant IAP-103 Wireless Access Point, 802.11n, 2x2:2, dual radio, integrated antennas – Restricted
regulatory domain: Japan
Mounting Accessories
AP-220-MNT-C1
Aruba Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for flat rails). Color: black.
Spare.
AP-220-MNT-C2
Aruba Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for Interlude and
silhouette style rails). Color: black
AP-220-MNT-W1
Aruba Access Point Mount Kit (basic, flat surface). Contains 1x flat surface wall/ceiling mount bracket.
Color: black
AP-200-MNT-W2
Aruba Access Point Mount Kit (secure, flat surface or wall-box, small). Contains 1x mount cradle.
Color: white
Generic Indoor AP Accessories
AP-AC-UN
12V/18W Indoor Access Point AC power adapter. Universal, ships with 8 country-specific plug inserts
(US, EU, UK, Australia, China, Korea, Argentina, Brazil), covering all Aruba core countries
AP-AC-12V18
12V/18W Indoor Access Point AC power adapter. Does not include country-specific power cord
(order separately)
AP-CBL-SER
AP console port adapter cable (proprietary to DB9 female RS232)
PD-3501G-AC
15.4W 802.3af PoE midspan injector, 10/100/1000BASE-T Ethernet
1344 CROSSMAN AVE | SUNNYVALE, CA 94089
1.866.55.ARUBA | T: 1.408.227.4500 | FAX: 1.408.227.4550 | INFO@ARUBANETWORKS.COM
www.arubanetworks.com
©2015 Aruba Networks, Inc. Aruba Networks®, Aruba The Mobile Edge Company® (stylized), Aruba Mobilty Management System®, People Move. Networks Must
Follow.®, Mobile Edge Architecture®, RFProtect®, Green Island®, ETIPS®, ClientMatch®, Bluescanner™ and The All Wireless Workspace Is Open For Business™ are all
Marks of Aruba Networks, Inc. in the United States and certain other countries. The preceding list may not necessarily be complete and the absence of any mark from
this list does not mean that it is not an Aruba Networks, Inc. mark. All rights reserved. Aruba Networks, Inc. reserves the right to change, modify, transfer, or otherwise
revise this publication and the product specifications without notice. While Aruba Networks, Inc. uses commercially reasonable efforts to ensure the accuracy of the
specifications contained in this document, Aruba Networks, Inc. will assume no responsibility for any errors or omissions. DS_AP103Series_041615
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising