PH-1001X
4200
lm
8
lbs
XGA Wired
LAN HDMI
High Lumen Installation Projector
Visible light spectrum
520
Range of colors that were
difficult to reproduce with the
three primary colors of light
530
540
510
550
BrilliantColor™ and DLP® technology from Texas Instruments, combined with Taxan’s
specialized color wheel and Variable Illumination Technology, along with a number of
other technological advances, result in a revolutionary new level of color reproduction.
560
570
580
590
600
BrilliantColor™
610
630
680
490
Color accuracy is paramount to a quality image. BrilliantColor™ not
only improves color accuracy, it brightens secondary colors as well.
Yellows and light blues are greatly enhanced, and subtle intermediate
hues are produced with more accuracy than can be achieved with
conventional projectors.
480
Color range added
by BrilliantColor TM
470
460
420
Range of colors reproduced
by a conventional DLP® projector
Networked Control
In order to be of more convenient use in the work environment, Taxan
the PH-1001X has both networking and remote control features. The
RJ45 jack and wired LAN functionality make it possible to perform a
variety of operations indirectly, including power on/off, brightness
adjustment, contrast adjustment, video-source and sound-mute, etc.
HDMI input
DVI-I input
Multiple Interfaces for Extensive Connectivity
Connection Options
Input: DVI-I, mini D-sub 15-pin, HDMI, component, S-Video, composite
Output: Mini D-sub 15-pin, DC 12 V (screen trigger function)
Audio output (variable) are provided, allowing you to change the volume
of the external speakers by adjusting the projector’s volume level.
PC input
S-Video input
Monitor output
Video input
DC output
(Screen trigger)
USB
Audio input
LAN
(RJ45)
Component
input
Anti-theft lock
Audio input
RS-232C
Audio output
Other Features
Direct power on/off
• Turn the projector power on and off from the main power switch
High Lumen Installation Projector
The projector can be powered on (off) by plugging it into (unplugging if
from) an AC outlet. If the projector is suspended from the ceiling, it can be
powered on and off by using the associated circuit breaker switch, rather
than using a remote control.
Linked screen trigger function
• Ideal for use with large motorized screens!
The screen trigger (DC12V) enables automatic raising and lowering of a
motorized screen when the projector is powered on and off. This is ideal for
venues with large motorized screens such as conference rooms. (Note:
Some motorized screens may not support the screen trigger function.)
Wall color compensation
• Ideal for indoor or outdoor use when no screen is available!
This function delivers color reproduction very similar to that projected on a
white surface, even when a colored wall or blackboard is used in place of a
screen.
Wall color
compensation
function
OFF
Wall color
compensation
function
ON
Advanced features utilizing Wired LAN (RJ45)
• Automatically receive projector status reports by e-mail!
This feature automatically sends a message to the preset e-mail address
when an event such as a burned out lamp or product failure occurs.
• Control and manage the projector from a Web browser
via a LAN link!
The projector can be controlled and its operating status monitored
remotely using a standard Web browser running on a personal computer
linked to a LAN to which the projector is also connected. It is also possible
to manage multiple projectors connected to a single network. This
functionality enables centralized control via a network or using a control
panel.
A notification is provided by
e-mail when the lamp needs
replacement.
High-definition connection options
• HDMI connector for transferring both high-quality
images and audio from digital RGB devices!
In addition to personal computers, a wide variety of digital RGB devices
can be connected to the projector via an HDMI terminal, including
Blu-ray disc players and game consoles. Supports HDCP copyright
protection technology.
• DVI-I Connector for clear image reproduction!
The DVI-I digital interface terminal supports fully digital connections to
the projector for clear images with no distortion. HDCP is also supported.
• Connect video and audio components to the projector!
Component input (Y, Pb/Cb, Pr/Cr) enable the connection of video
components with excellent picture quality.
*1. Average values are indicated for the product overall at the time of shipping, according to the JIS X 6911:02003 specification
format for data projectors. The measurement method and conditions are based on Appendix 2.
DLP® and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments.
Easy lamp replacement
• Lamp replacement is easy even in ceiling
mounted installations!
Since the lamp can be accessed from the top of
the projector, anyone can replace the lamp very
easily, whether the projector is on a desktop or
mounted on the ceiling.
9610 SW SUNSHINE CT.
SUITE 500
BEAVERTON, OR 97005
800-211-9001 · 503-748-8700
www.plus-america.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement