DM-RMC-100-S DigitalMedia 8G Fiber Receiver & Room Controller 100 ™

DM-RMC-100-S DigitalMedia 8G Fiber Receiver & Room Controller 100 ™
DM-RMC-100-S
DigitalMedia 8G™ Fiber Receiver & Room Controller 100
>> DigitalMedia 8G™ Fiber receiver and display controller
>> Connects to a DM® switcher or transmitter over one multimode
fiber strand [1]
>> Supports cable lengths up to 1000 ft (300 m) using
CresFiber® 8G, or 500 ft (150 m) using other multimode fiber [1]
>> Provides one HDMI® or DVI display output [2]
>> Handles video resolutions up to Full HD 1080p
>> Handles computer resolutions up to WUXGA
>> Handles 3D video and Deep Color
>> Handles Dolby® TrueHD, DTS-HD®, and uncompressed
7.1 linear PCM audio
>> HDCP compliant
>> Provides a 10/100 Ethernet LAN connection
>> Enables device control via CEC, IR, RS-232, and Ethernet
>> Compatible with Crestron® USB over Ethernet Extenders [3]
>> Allows quick, easy setup and diagnostics
>> Low-profile surface mount design
>> Universal power pack included
The DM-RMC-100-S provides a simple one-box interface solution for
a single display device as part of a complete Crestron® DigitalMedia™
system. It functions as a DM 8G® Fiber receiver and control interface,
providing a single HDMI® output along with Ethernet, RS-232, and IR
control ports. Its compact, low-profile design allows the DM-RMC-100-S
to be installed discreetly behind a flat panel display or above a ceiling
mounted projector. It connects to the head end or source location using a
single multimode fiber strand.[1]
DigitalMedia 8G™ Fiber
As the leader in HDMI and control system technologies, Crestron
developed DigitalMedia (DM®) to deliver the first complete HD AV
distribution system to take HDMI to a higher level. DigitalMedia allows
virtually any mix of HDMI and other AV sources to be distributed throughout
a home, office, school, or virtually any other facility. The latest generation
of DM is called DigitalMedia 8G (DM 8G). Engineered for ultra highbandwidth and ultimate scalability, DM 8G provides a true one-wire
lossless transport for moving high-definition video, audio, Ethernet, and
control signals over a choice of twisted pair or fiber optic cable.
DM 8G Fiber uses multimode fiber to enable signal distribution between
buildings and over lengthy wire runs. DM 8G Fiber handles uncompressed
Full HD 1080p video signals with support for 3D, Deep Color, and HDCP, as
well as computer signals up to WUXGA. Audio capabilities include support
for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master
Audio™ as well as uncompressed linear PCM. All signals are transported
over one strand of multimode fiber, supporting distances up to 1000 feet
(300 m) using CresFiber® 8G, or 500 feet (150 m) using other multimode
fiber optic cable.[1]
crestron.com
| 800.237.2041
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-S for
connection to a display or other device. The HDMI output can also handle
DVI signals using an appropriate adapter or interface cable[2].
A single fiber strand connects the DM-RMC-100-S to a DM switcher or
transmitter, transporting video, audio, control, and networking signals
all through one simple SC type optical connection.[1] Multiple
DM-RMC-100-Ss may be installed to handle each display in a multiroom
distribution system, all fed from a central DM-MD series switcher. Or, a
single DM-RMC-100-S can be fed straight from a DM 8G Fiber
transmitter, affording a simple solution for extending a computer or AV
signal to a single display.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates
high-speed Ethernet networking for a total signal distribution solution. The
DM-RMC-100-S includes a 10/100 Ethernet port, providing a convenient
LAN connection for a local network device.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The DM-RMC-100-S
includes built-in RS-232, IR, and Ethernet control ports to allow
programmable control of the display device connected to it. But, it can also
provide an alternative to such conventional control methods by harnessing
the CEC (Consumer Electronics Control) signal embedded in HDMI. Through
its connection to the control system, the DM-RMC-100-S provides a
gateway for controlling the display device right through the HDMI
connection, potentially eliminating the need for any dedicated control
wires or IR emitters.
USB Signal Extension (optional)
DigitalMedia allows for the routing of USB signals alongside video and
audio. USB signal extension is enabled on the DM-RMC-100-S by adding
a USB-EXT-DM USB over Ethernet Extender Module[3].
DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver & Room Controller 100
DM-RMC-100-S – Left, Front, and Right Views
Low-Profile Installation
The DM-RMC-100-S mounts conveniently to a wall, ceiling, or other flat
surface. At just one inch deep, it fits easily behind a flat panel display or
above a ceiling-mounted projector. All connections and LED indicators are
positioned on the sides, ensuring optimal access and visibility for a clean,
serviceable installation. An array of indicators is provided for easy setup
and troubleshooting.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz
(576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus
any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
Audio
Input Signal Type: DM 8G Fiber
Output Signal Type: HDMI
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, up to 8ch PCM
SPECIFICATIONS
Communications
Video
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial
TTL/RS-232 (0-5 Volts) up to 19.2k baud
DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet
HDMI: HDCP, EDID, CEC
Input Signal Type: DM 8G® Fiber (DigitalMedia™ over one multimode fiber
optic strand)[1]
Output Signal Types: HDMI®, DVI[2]
Formats: DM 8G Fiber & HDMI w/Deep Color & 3D, DVI, HDCP content
protection support
Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz
(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,
852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz,
1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz
(720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24),
1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz,
2048x1152@60Hz, plus any other resolution allowed by HDMI up to
165MHz pixel clock
crestron.com
| 800.237.2041
NOTE: Supports management of HDCP and EDID; supports management
of CEC between the connected HDMI device and a control system
Connectors
HDMI OUT: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
COM: (1) 5-pin 3.5mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
DM-RMC-100-S DigitalMedia 8G™ Fiber Receiver & Room Controller 100
IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/
Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
MODELS & ACCESSORIES
LAN: (1) 8-wire RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
Included Accessories
Ground: (1) 6-32 screw, chassis ground lug
DM IN MMF/SC: (1) SC female optical fiber connector;
DM 8G Fiber input;
Connects to DM 8G Fiber output of a DM switcher, transmitter, or other DM
device via CresFiber® 8G fiber optic cable[1]
24VDC 0.75A MAX: (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WU power pack included
Controls & Indicators
HDMI OUT: (1) green LED, indicates video signal presence at the
HDMI output
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
DM IN: (1) green LED, indicates DM link status
RESET: (1) miniature recessed pushbutton, for hardware reset
SETUP: (1) red LED and (1) miniature recessed pushbutton, for
Ethernet setup
24VDC: (1) green LED, indicates operating power supplied via local
power pack
Power Requirements
Power Pack: 0.75 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 61 BTU/Hr
Available Models
DM-RMC-100-S: DigitalMedia 8G™ Fiber Receiver & Room Controller 100
PW-2407WU: Wall Mount Power Pack 24VDC, 0.75A, Universal
(Qty. 1 included)
Available Accessories
CRESFIBER8G-NP: CresFiber® 8G Multimode Fiber Optic Cable, 50/125 x4
breakout, non-plenum
CRESFIBER8G-P: CresFiber® 8G Multimode Fiber Optic Cable, 50/125 x4
breakout, plenum
CRESFIBER-CONN-SC50UM-12: Connectors for CresFiber® 8G Multimode
Fiber Optic Cable, SC 50µm, 12-Pack
CRESFIBER-TK: CresFiber® Termination Kit (AFL Telecommunications™)
CRESFIBER-SINGLE-SC-P: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum
CBL Series: Crestron® Certified Interface Cables
MP-WP: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
USB-EXT-DM: USB over Ethernet Extender with Routing
Notes:
1. The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m)
using Crestron CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using Crestron
legacy CRESFIBER, Crestron CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode
fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete
system design guidelines. All wire and cables are sold separately.
2. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI
signal. CBL-HD-DVI interface cables are available separately.
3. USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the
USB-EXT-DM spec sheet for more information.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Enclosure
Chassis: Metal, black finish, with (2) integral mounting flanges, vented top
and bottom
Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height: 6.09 in (155 mm)
Width: 5.63 in (143 mm)
Depth: 1.02 in (26 mm)
Weight
14.7 oz (416 g)
crestron.com
| 800.237.2041
Crestron, the Crestron logo, CresFiber, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby
Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master
Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or
other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of
HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.
DM-RMC-100-S |
DigitalMedia 8G™ Fiber Receiver & Room Controller 100
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
All brand names, product names and trademarks are the property of their respective owners.
©2015 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 10/06/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising