SAW BLADES
CLASS # 14
LENOX HACKSAW BLADES
These are the real McCoy, red, white, and blue, ‘Hackmaster 2’ blades.
They are a bi-metal construction and what that means is that a high carbon steel
back is used for strength and then a tungsten steel cutting edge is ultrasonically
welded to the blade. This provides a supreme quality blade that will cut almost
any machine grade steel. These are the Cadillac of blades. People who know
quality, know the name ‘Lenox’.
These are absolutely the best quality hacksaw blade on the market. They
are available in the standard 12” length and will fit any standard 12” hacksaw
frame.
ITEM#:
TEETH:
LEN1218 18 TOOTH
LEN1224 24 TOOTH
LEN1232 32 TOOTH
DESCRIPTION:
HACKMASTER 2 HACKSAW BLADE
HACKMASTER 2 HACKSAW BLADE
HACKMASTER 2 HACKSAW BLADE
CLASS # 14
HACKSAW BLADES
All hacksaw blades are standard 12” length and will fit most hand hacksaw
frames out there. These are all top quality blades and made to rigid quality control
specs. All three types are made in three different tooth configurations.
HIGH CARBON STEEL HACKSAW BLADES
General purpose blades made from tungsten alloy steel. Unique heat treating
results in a hard tooth structure and flexible back. Excellent standard blade quality.
Made U.S.A.
SANDVIK BI-METAL HACKSAW BLADES
The perfect blade for plumbing and electrical installation work. Ideal for fitting
and bench work where high performance and accuracy are necessary. This blade
features a tooth line of high alloy, high speed steel that is laser welded in a vacuum
to a backing of tough alloy tool steel. The result is exceptional cutting power and
wear resistance. Made in U.S.A.
TRADE MASTER COBALT HACKSAW BLADES
These are the heavy duty cobalt bi-metal blades. They feature high speed cobalt
steel cutting edge electron beam welded to an alloy steel back. Full tooth hardness
combines with a flexible back to provide a tough, long lasting, shatter proof
hacksaw blade. Made in France.
18 TPI = Coarse
24 TPI = Medium
32 TPI = Fine
ITEM#:
123
124
125
SIZE:
DESCRIPTION:
12/18 HIGH CARBON HACKSAW BLADE
12/24 HIGH CARBON HACKSAW BLADE
12/32 HIGH CARBON HACKSAW BLADE
M18
M24
M32
12/18
12/24
12/32
BI-METAL HACKSAW BLADE
BI-METAL HACKSAW BLADE
BI-METAL HACKSAW BLADE
123C
124C
125C
12/18
12/24
12/32
COBALT HACKSAW BLADE
COBALT HACKSAW BLADE
COBALT HACKSAW BLADE
CLASS # 14
PORTABLE BANDSAW BLADES
These portable bandsaw blades by Milwaukee® are bi-metal, super-tough
and outlast conventional blades up to 3 times, requiring fewer blade changes.
An extremely hard and uniform tooth point is electron beam welded to a
tough durable backing with high flex life for faster cutting and longer blade
life.
They are recommended for cutting aluminum, angle iron, bronze, brass,
copper, galvanized pipe, mild steel and tougher steels like stainless, chrome,
tungsten steel and other problem material at slow speed.
ITEM#:
PBC3510
PBC3514
PBC3518
PBC3524
DESCRIPTION:
MILWAUKEE PORTA-BANDSAW BLADES
MILWAUKEE PORTA-BANDSAW BLADES
MILWAUKEE PORTA-BANDSAW BLADES
MILWAUKEE PORTA-BANDSAW BLADES
**These blades will only fit the Milwaukee® PM6242-6 compact bandsaw. **
CLASS # 14
PORTA BANDSAW BLADES
These are the ‘Sandflex Dragon’ bi-metal blades made in the USA by
Sandvik for use on a portable bandsaw. These are the toughest blades available.
They are long lasting, smooth cutting and they resist stretching and guide wear.
The high speed steel cutting edge is laser welded to an alloy steel back.
This gives the blade full tooth hardness and back flexibility, which is the ideal
combination for optimum cutting and blade life.
We stock these in three tooth configurations 14tpi, 18tpi, & 24tpi. They
are all 44 7/8” long, 1/2” wide and .20 thick. They will fit most portable band
saws out there, but make sure your customer knows the exact dimensions. We
only carry the one length so please confirm size.
ANATOMY OF A BLADE
ITEM#:
PB4414
PB4418
PB4424
SIZE / TPI:
44 7/8” x 14TPI
44 7/8” x 18TPI
44 7/8” x 24TPI
DESCRIPTION:
PORTA BAND SAW BLADE
PORTA BAND SAW BLADE
PORTA BAND SAW BLADE
CLASS # 14
BAND SAW BLADES
These are professional blades designed for stationary or bench top band
saws and have super flexible backs with a very hard cutting edge.
They’re available in hi-carbon steel and in a bi-metal tungsten and alloy
steel. Both blades will cut metal but the bi-metal gives a more cost effective
cut for continuous, daily use.
All of these blades are 64-1/2” long by 1/2” wide by .025 thick and they
are available in different tooth configurations for different applications. The
thicker the material to be cut, the coarser the blade.
TOOTH SIZE:
4 TOOTH SKIP
TYPE BLADE:
HIGH CARBON
USE:
WOOD
HIGH CARBON
HIGH CARBON
HIGH CARBON
HIGH CARBON
BI-METAL
METAL
METAL
METAL
METAL
METAL
ITEM#:
SIZE / TEETH:
BSW4
64-1/2” x 4 TPI
DESCRIPTION:
BAND SAW BLADE
USE:
WOOD
BS10
BS14
BS18
BS24
BSBMV
BAND SAW BLADE
BAND SAW BLADE
BAND SAW BLADE
BAND SAW BLADE
BAND SAW BLADE
METAL
METAL
METAL
METAL
METAL
10 TOOTH RAKER
14 TOOTH RAKER
18 TOOTH RAKER
24 TOOTH RAKER
10/14 TOOTH VARIABLE
64-1/2” x
64-1/2” x
64-1/2” x
64-1/2” x
64-1/2” x
10 TPI
14 TPI
18 TPI
24 TPI
10/14 TPI
CLASS # 14
RECIPROCATING BLADES
When you go through wood embedded with nails or stainless steel most
reciprocating blades will lose a tooth or dull up very quickly. With our ACE
cobalt ‘Viper’ blades you will never have that problem.
These blades are made with 9% Cobalt in the teeth and are made to go
through spring steel, stainless steel, even case hardened steel like no other
blade on the market. They have the universal 1/2” shank, so they fit almost
any recip saw. ACE Viper blades are Bi-metal Cobalt blades manufactured
in the USA.
ITEM#:
AV414
AV418
AV424
SIZE/TPI:
4" x 14 TPI
4" x 18 TPI
4" x 24 TPI
USE:
WOOD / METAL
METAL
METAL
AV814
8” x 14 TPI
WOOD / METAL
AV1214
12" x 14 TPI
METAL
CLASS # 14
RECIPROCATING BLADES
Made by one of the World’s leading manufacturers of professional quality
saw blades, and exclusively for ACE Industrial Supply, these new BadAzz
reciprocating blades are destined to cut right through the competition!
Bi-Metal and 8% Cobalt composition, these BadAzz reciprocating blades
have a universal 1/2” shank to fit any reciprocating saw. The metal cutting
blades have a thickness of .035 and will slice through spring steel, stainless
steel and case hardened steel faster and cleaner than any of the competitor’s
blades.
The wood cutting BadAzz blades will make quick work of any wood, with
or without nails, and have a thickness of .050 and, very important in today’s
economy, all of our exclusive BadAzz blades are American Made!
ITEM#:
AV606
AV614
AV618
AV624
SIZE:
6” x 6 TPI
6” x 14 TPI
6” x 18 TPI
6” x 24 TPI
DESCRIPTION:
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
AV818
8” x 18 TPI
AV81014 8” x 10/14 TPI
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
AV906
AV918
9” x 6 TPI
9” x 18 TPI
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
AV1206
AV1218
12” x 6 TPI
12” x 18 TPI
ACE BADAZZ RECIP BLADE
ACE BADAZZ RECIP BLADE
Legend
Wood Cutting
Metal Cutting
Wood or Metal
BadAzz Blades available only through ACE Industrial Supply.
CLASS # 14
ACE VIPER
DEMOLITION SAWSALL BLADE
ACE has the right sawsall blade for the job, in lengths of 6”, 9”, or 12”. Our
sawsall blades have to be the best to carry our name. These blades deliver fast,
accurate, and “chatter” free cuts in drywall, nail embedded wood, even the
occasional sheet metal that you run into on some demolition jobs.
Our blades are bi-metal and as thick as or thicker than the best brand names.
They won’t bend or break under extreme pressure. So, don’t burn out your
sawsalls on the tough jobs. Put in an ACE bi-metal demo blade and get the job
done with ease.
ITEM#:
AVDM606
AVDM906
AVDM1206
DESCRIPTION:
6” ACE VIPER DEMO BLADE
9” ACE VIPER DEMO BLADE
12” ACE VIPER DEMO BLADE
CLASS # 14
RECIPROCATING BLADES
The Bosch bi-metal blades are the best all-purpose blades for any reciprocating
saw. They’re Swiss made and are well known worldwide as the sharpest, fastest
cutting, and longest lasting blades.
Recommended for thin metal and sheet metal, the 6” x 24 TPI with wavy set
and milled teeth will deliver fine, straight cuts without binding in metals from
1/16” to 1/8”; pipes and profiles to 1/2”. Use the 6” x 18 TPI for quick, medium to
rough cuts.
ITEM#: SIZE/TPI:
DESCRIPTION:
BSH614 6” x 14 TPI BOSCH BI-METAL RECIP. BLADE
BSH618 6” x 18 TPI BOSCH BI-METAL RECIP. BLADE
BSH624 6” x 24 TPI BOSCH BI-METAL RECIP. BLADE
For all hard and soft woods, particle board, plywood, and nail embedded wood
from 1/4” to 4” thick, and for plastics, the 6” x 5/8 TPI, with a variable cut, side set
and milled teeth will deliver great curved or straight cutting with no binding. Also
great for fiberglass 1/4” to 2”.
ITEM#:
BSH658
BSH606
SIZE/TPI:
6” x 5/8 TPI
6” x 6 TPI
DESCRIPTION:
BOSCH BI-METAL RECIP. BLADE
BOSCH BI-METAL RECIP. BLADE
For fast and deeper cuts in wood, nail-embedded wood, plastic, insulating
board, and light building blocks 1/4” to 6”, use the 9” blade with 6 TPI, side set
and milled teeth for quick, medium rough cuts. For smooth cuts, use this same
blade with 18 teeth per inch.
ITEM#:
SIZE/TEETH:
DESCRIPTION:
BSH906
9” x 6 TPI
ITEM#:
SIZE/TEETH:
DESCRIPTION:
BSH914
BSH918
9” x 14 TPI
9” x 18 TPI
BOSCH BI-METAL RECIP. BLADE
BOSCH BI-METAL RECIP. BLADE
BOSCH BI-METAL RECIP. BLADE
For long, deep cuts in light building blocks, hard and soft wood, and plywood;
and in plastic 1/4” to 10”, use the 12” x 6 TPI with side set and milled teeth. Ideal
for plastic pipe to 10”.
ITEM#:
SIZE/TEETH:
DESCRIPTION:
BSH1206
12” X 6 TPI
BOSCH BI-METAL RECIP. BLADE
For long, deep cuts in metals, non-ferrous metals, aluminum, 1/8” – 3/8”; pipes
and profiles up to 3”, fiberglass 1/8” – 2”, plastic 1/8” – 6”, sandwich material and
wood with nails 1/8” – 6”. Variable tooth spacing (10/14 TPI) for cuts in different
materials: flexible and break resistant.
ITEM#:
BSH1214
BSH1218
SIZE/TEETH:
12” x 10/14 TPI
12” x 18 TPI
DESCRIPTION:
BOSCH BI-METAL RECIP BLADE
BOSCH BI-METAL RECIP BLADE
CLASS # 14
BOSCH “PROGRESSOR” BLADES
Bosch makes these Progressor blades for both jigsaw (single tang) and
for reciprocating saws. The teeth have a progressive pitch from small in the
back of the blade to large in the front of the blade.
The Progressor jigsaw and reciprocating blades for metal are a tilt
angle tooth design for longer and faster cutting. The progressive pitch with
this tilt angle design allows you to cut thick and thin materials faster than
any other blade on the market. The Progressor wood blades have super
sharp tips for precise plunge cuts. The teeth are “fleam” ground and side set
for superior accuracy and splinter free cuts with clean edges.
These are the sharpest and cleanest cutting blades on the market --- the
best contractors know that Bosch blades are the best Swiss made!!! Now
with progressive teeth for even faster cuts with no “binding”
ITEM#:
BXJIGM
BXJIGW
DESCRIPTION:
BOSCH PROGRESSIVE JIGSAW BLADE
BOSCH PROGRESSIVE JIGSAW BLADE
USE:
METAL
WOOD
BXMETAL 6” PROGRESSIVE RECIPROCATING BLADE METAL
BXWOOD 6” PROGRESSIVE RECIPROCATING BLADE WOOD
CLASS # 14
3 PC. BLADE AND ROUTER SET
This professional saw blade kit is the perfect ‘grab and go’ package for
all cabinet makers, carpenters and woodworkers of any type. Manufactured
by Amana®, one of the leading brands of Saw Blades in the World, this is a
top of the line set of 2 carbide blades and a 6 piece router bit set.
Includes one 10” x 60 tooth and one 10” x 80 tooth ATB carbide tipped
saw blades and 6 assorted router bits with 1/4” shanks in a convenient hard
wood storage box. Imported.
Router Bit Set Includes:
1/2” Diameter straight cut bit
1/4” Radius corner round bit
1/2” Diameter flush trim bit
1/4” radius cove bit
90° ‘V’ Groove bit
5/32” Roman Ogee bit
ITEM#:
138
DESCRIPTION:
3 PC. SAW BLADE AND ROUTER BIT SET
CLASS # 14
LENOX BI-METAL
RECIPROCATING BLADES
These are the real McCoy; Lenox brand reciprocating blades. These are
absolutely the best blade running. They are the bi-metal type and feature a
1/2" uni-fit shank. They will fit almost any sawsall on the market.
We stock these blades in the popular 6" length and in three tooth
configurations, 24 tooth for metal, 18 tooth for metal, and 6 tooth for wood.
Anybody that knows and uses top quality will know the Lenox blades.
These are used by plumbers, electricians, heating and air conditioning,
builders, etc… they are a very popular item and are very good re order items.
The metal blades are used to cut metal up to 1/8" thick. This includes
conduit, tubing and nail embedded wood. The wood blades are a general
roughing in blade. They are a fast cutting blade and will cut nail embedded
wood.
ITEM#:
LEN66
LEN618
LEN624
SIZE/TEETH:
DESCRIPTION:
6”x 6 TPI
LENOX WOOD RECIPROCATING BLADE
6”x 18 TPI
LENOX METAL RECIPROCATING BLADE
6”x 24 TPI
LENOX METAL RECIPROCATING BLADE
CLASS # 14
9” ‘UGLY’ BLADE
This is the blade with only 4 teeth per inch! These are the real McCoy Skil
‘Ugly’ reciprocating blades and they cut through wood faster than any other
blade on the market.
They are made from high grade, spring steel and have the fleam sharpened
teeth that aggressively cut into the wood in both forward and reverse action,
unlike other blades that only cut in the forward motion.
This blade is so sharp you’ll cut yourself if you look at it wrong, and it has
the 1/2” universal shank that will fit into almost any reciprocating saw.
ITEM#:
UGLY
DESCRIPTION:
9” SKIL® 9” ‘UGLY’ BLADE
CLASS # 14
TORCH™ & AX™ SAWZALL BLADES
These heavy duty reciprocating blades from Milwaukee® are thicker and more
rigid to resist fracturing and bending. The 1” tall blade body reduces blade twisting
for straighter, more accurate cuts.
Milwaukee Ax™ blades are optimized for the best cutting in nail-embedded
wood , lumber and plywood. Their precision forming process creates sharper teeth
and the full raker tooth on blade tip allows for easy plunging.
Milwaukee Torch™ blades are ice hardened for up to 50% longer life and the
double relief angle reduces tooth stress.
ITEM#:
AXE658
AXE958
AXE1258
ITEM#:
TR618
TR614
TR914
TR918
TR1218
SIZE:
6” x 5/8 TPI
9” x 5/8 TPI
12” x 5/8 TPI
SIZE:
6” x 18 TPI
6” x 14 TPI
9” x 14 TPI
9” x 18 TPI
12” x 18 TPI
THICK:
.062
.062
.062
THICK:
.042
.042
.042
.042
.042
DESCRIPTION:
AX™ SAWZALL BLADE
AX™ SAWZALL BLADE
AX™ SAWZALL BLADE
DESCRIPTION:
TORCH™ SAWZALL BLADE
TORCH™ SAWZALL BLADE
TORCH™ SAWZALL BLADE
TORCH™ SAWZALL BLADE
TORCH™ SAWZALL BLADE
CLASS # 14
DEMOLITION RECIPROCATING BLADES
Bosch® demolition blades feature an extra thick kerf for maximum control, less
vibration and straighter cuts. They also have a taper back for easier starts in tough
to reach applications and a variable gullet depth for faster chip removal as well as
smoother cuts.
A 5° tilt angle makes cutting a lot faster and provides longer life and overall
improved performance. The tip is designed for plunge cutting in demolition work
and remodeling work and a reinforced tooth design helps to handle tough wood
with nails applications.
ITEM#:
BDM658
BDM958
BDM1258
SIZE:
6” x 5/8 TPI
9” x 5/8 TPI
12” x 5/8 TPI
THICK:
DESCRIPTION:
.062
BOSCH DEMOLITION BLADE
.062
BOSCH DEMOLITION BLADE
.062
BOSCH DEMOLITION BLADE
CLASS # 14
FIRE AND RESCUE BLADES
The Morse® Fire and Rescue reciprocating blade is the one blade preferred by
professional firefighters everywhere when lives are on the line. These bi-metal,
extra wide and extra thick blades allow heavy feed and great stability to cut faster
and reduce extraction times.
They are extremely effective on machined metals encountered in vehicle
extraction and demolition and will also cut wood, plastics and various other
materials. The fine tooth pitch provides superior performance in sheet metal and
vehicle frames.
Specifications:
•
•
•
•
Thickness: .062
Width: 7/8”
Bi-Metal
Made in USA
ITEM#:
MKFR610
MKFR614
DESCRIPTION:
MORSE FIRE AND RESCUE BLADE - 6” x 10TPI
MORSE FIRE AND RESCUE BLADE - 6” x 14TPI
MKFR910
MKFR914
MORSE FIRE AND RESCUE BLADE - 9” x 10TPI
MORSE FIRE AND RESCUE BLADE - 9” x 14TPI
MKFR1210
MKFR1214
MORSE FIRE AND RESCUE BLADE - 12” x 10TPI
MORSE FIRE AND RESCUE BLADE- 12” x 14TPI
CLASS # 14
CAR BODY BLADE
These heavy duty car body blades are now bi-metal for strength and long
blade life. They will fit all pneumatic saws like Shinano, Chicago Astro, etc.
and some electric machines.
They have the thin tapered cutting surface normally used for cutting car
body panels. Available in 18, 24 or 32 teeth per inch.
THEY ARE BULK PACKED 100
BLADES PER BOX.
SPEC BOX
•
•
•
•
BI-METAL
MADE IN SWEDEN BY
SANDVIK
3 ½” LENGTH
THICKNESS
18 TPI – 1/5”
24 TPI – 1/12” – 1/5”
32 TPI – 1/12”
Note: These blades fit item #277 – air powered reciprocating saw (viper
reciprocating blades will not fit the air reciprocating saw!)
ITEM#:
AIR318
AIR324
AIR332
SIZE/TEETH:
3 1/2”x 18 TPI
3 1/2”x 24 TPI
3 1/2”x 32 TPI
DESCRIPTION:
AIR RECIPROCATING SAW BLADE
AIR RECIPROCATING SAW BLADE
AIR RECIPROCATING SAW BLADE
CLASS # 14
CARBIDE GRIT SAWSALL BLADES
Carbide grit sawsall blades are the next generation in sawsall blades
because of their versatility. You get thousands of tungsten carbide cutting
edges permanently bonded to a tough alloy blade body. The super-hard,
abrasive quality of this grit material allows you to use these blades in all
kinds of materials without the hassle of blade changes. You can cut wood to
plaster to metal to marble, this blade does it all!!!
These carbide grit blades are super resistant to heat, wear and abrasion.
They’ll cut a lot of materials that other blades can’t. You’ll be amazed at the
long life of these blades, even when cutting hardened chain, bolts, and
stranded cable. You can cut fiberglass, ceramic, glass, and then use the same
blade for soft and hard woods and hardened steel.
ITEM#:
AVCG600
AVCG800
DESCRIPTION:
6” CARBIDE GRIT ACE SAWSALL BLADE
8” CARBIDE GRIT ACE SAWSALL BLADE
CLASS # 14
THIN KERF 7-1/4” CARBIDE SAW BLADE
Timberforce blades, by Amana® feature alternate face, shear carbide tips
for smoother, cleaner cuts and longer lasting performance. The cooling slots
disperse the heat, allowing the blade to run cooler longer, and because this is
a thin kerf blade there is less waste and less stress on the saw.
They also feature expansion slots to prevent heat build up, and the teeth
have an ‘anti kickback’ design for safety. They have a 6,000 RPM rating and
a 5/8” arbor hole with diamond knockout. The tips are precision ground, C-3
carbide. Import.
ITEM#:
DESCRIPTION:
140
7-1/4” 24 TEETH THIN KERF CARBIDE BLADE
CLASS # 14
BLACK MAMBA
FRAMING & DECKING BLADE
The Black Mamba™ framing and decking blade by A.G.E. is the best saw
blade you’ll ever use! It features hollow ground faces on the teeth for fast on
line cuts and premium grade carbide teeth for extended blade life.
The thin kerf design minimizes resistance for fast, clean cuts and laser-cut
expansion slots prevent heat buildup and blade warpage. The blade plate is
also laser cut to provide perfect tooth alignment for accurate cuts every time.
The laser cut elements of this blade also reduce noise and vibration.
• Diameter: 7-1/4
• Teeth: 24
• Bore: 5/8 w/diamond
‘twist out’
• Max RPM: 8,300
• Perfect for wet lumber
• German made
ITEM#:
143
DESCRIPTION:
BLACK MAMBA 7-1/4” FRAMING/DECKING BLADE
CLASS # 14
DYANITE SAW BLADES
Bosch construction and framing blades feature the patented Dyanite® C3 Carbide
teeth that stay sharp up to 6 times longer than standard carbide blades. These teeth
are diamond ground to stay sharper and have an exclusive shock resistant design.
The blade is a fully hardened thin kerf plate with expansion slots to reduce blade
warping and a tri-metal shim braze on the tips give them impact resistance. They
have body slots to keep the blades cooler and an anti friction coating for a faster
cut.
These blades are 24 teeth, 7-1/4” diameter with a 5/8” diamond knockout arbor
and are recommended for construction and framing.
ITEM#:
721
DESCRIPTION:
BOSCH 7-1/4” x 24 TEETH DYANITE SAW BLADE
CLASS # 14
TIMBERLINE 7 1/4” C.T. SAW BLADE
‘Timberline’ saw blades are professional blades by the same manufacturer
that makes ‘Marathon’ blades. These are top quality, general purpose blades
for circular saws.
These blades have 24 teeth and 5/8 universal arbors and lightening vents
cut in them to prevent warping. The carbide tips are welded in an alternate
top bevel for smooth, splinter free cuts.
ITEM#:
724
DESCRIPTION:
TIMBERLINE 7 1/4” x 24 T C.T. SAWBLADE
CLASS # 14
CARBIDE TIP SAW BLADES
These are heavy duty carbide tipped saw blades for contractors and very
popular for rip and crosscut on wood framing, decking, hard and soft woods
and plywood.
They are alternate top bevel blades rated at 7000 RPM and have the 5/8”
arbor with a diamond knockout to fit all circular saws.
ITEM#:
SIZE:
127
6-1/2" x 24T
DESCRIPTION:
OSHLUN CARBIDE BLADE
128
130
TIMBERLINE® CARBIDE BLADE
TIMBERLINE® CARBIDE BLADE
7-1/4" x 24T
7-1/4” x 40T
®
129
8" x 24T
CR840 8" x 40T
OSHLUN® CARBIDE BLADE
OSHLUN® CARBIDE BLADE
924
940
ACE VIPER CARBIDE BLADE
ACE VIPER CARBIDE BLADE
9" x 24T
9" x 40T
CLASS # 14
10” CARBIDE TIP SAW BLADES
These heavy duty, carbide tipped saw blades from Amana® feature heat
treated hand hammered bodies to avoid warping and large carbide tips. They
are thin kerf design for ease of cut with minimal waste.
Designed for quick and accurate cuts in solid woods, as well as plastic,
formica and masonite. They are ATB, (alternate top bevel), grind with a 5/8”
bore to fit any 10” table saw. Import.
ITEM#:
131
1060
DESCRIPTION:
10” x 40 TOOTH CARBIDE BLADE
10” x 60 TOOTH CARBIDE BLADE
CLASS # 14
10” & 12” CONTRACTOR’S CARBIDE
SAWBLADES
Amana is the world’s largest maker of saw blades, so they’re 100%
guaranteed against defects. They’re made of the longest lasting micro-grain
carbide, which is C-4, fused to hand hammered bodies. They have a thin
kerf for fast, easy, and smooth cutting, even on cabinet grade work. You’ll
never get a “wobble” out of this blade because the steel body is fully
hardened. You’ll get straight and accurate cuts every time.
These are a commercial grade, specialty carbide, for general and finish
work in table saws, miter boxes, and radial arm saws. They have alternating
tooth grind with gullet designs that allow quick, burr free cuts in heavy duty
construction applications.
The 10” blade has 80 teeth, a 5/8” arbor and
is 7,000 rpm
The 12” blade has 60 or 100 teeth, 1” arbor,
and 6400 rpm
ITEM#: SIZE/TEETH:
DESCRIPTION:
135
10” x 80 TH CONTRACTOR’S CARBIDE BLADE
136
12” x 60 TH CONTRACTOR’S CARBIDE BLADE
137
12” x 100 TH CONTRACTOR’S CARBIDE BLADE
CLASS # 14
10” TRIPLE CHIP CARBIDE BLADE
These blades are made by ‘Timberline’, a division of ‘Amana’, the same
company that gives you top quality Router bits and ‘Marathon’ blades.
These are a triple chip tooth design to give you super clean cuts in MDF,
chipboard, plastic laminated boards, and melamine. They are 10” by 80
teeth, which are carbide tipped to stay cooler, prevent warping, and last
longer. Thin kerf blades remove less material, require less horse power and
less drag on your saw motor and brake.
They have a 5/8” arbor and a maximum RPM of 5500. IMPORT
ITEM#:
DESCRIPTION:
135TC 10”x 80 TOOTH TRIPLE CHIP CARBIDE BLADE
CLASS # 14
8 PC PLUMBERS HOLE SAW KIT
These are the ‘ACE Viper’ industrial bi-metal hole saws, you know
the ones that go through hard metal, stainless steel or even wood embedded
with nails. You'll never loose the teeth or dull these up after one use, these
bi-metal hole saws will never have that problem. They are constructed of a
combination of high speed steel and tungsten steel teeth.
This a complete set of hole saws, constructed with the most popular
plumbing sizes, they go from 3/4" all the way up to 2 1/4". You get the large
and small mandrel adapter, the pilot bits and the carrying case. All for one
ridiculous price.
SPEC BOX
MADE BY ACE INDUSTRIES U.S.A.
BI-METAL CONSTRUCTION.
1 1/4" CUTTING DEPTH.
6 HOLE SAWS (3/4, 7/8, 1 1/8, 1 3/8, 1 1/2,
1 3/4, 2 1/4") 2 - PILOT BITS, 1 LG MANDREL, 1
SM MAN. CARRY CASE.
SHATTER PROOF.
4 TEETH PER INCH.
HEAVY DUTY BACKING PLATE
ITEM#:
V9308
DESCRIPTION:
8 PC PLUMBERS BI-METAL HOLE SAW KIT
CLASS # 14
8 PC ELECTRICIANS HOLE SAW KIT
These are the ‘ACE Viper’ industrial bi-metal hole saws, you know
the ones that go through hard metal, stainless steel or even wood embedded
with nails. You'll never loose a tooth or dull these up after one use, they are
bi-metal, they will never have any problem. They are constructed of a
combination of high speed steel and tungsten steel teeth.
This a complete set of hole saws, constructed with the most popular
pipe and conduit entrace sizes, they go from 7/8" all the way up to 2 1/2".
You get the large and small mandrel adapter, the pilot bits and the carrying
case. All for one ridiculous price.
SPEC BOX
MADE BY ACE INDUSTRIES U.S.A.
BI-METAL CONSTRUCTION.
1 1/4" CUTTING DEPTH.
6 HOLE SAWS (7/8, 1 1/8, 1 3/8,1 3/4, 2, 2 1/2") 2 PILOT BITS, 1 LG MANDREL, 1 SM MAN.
CARRY CASE.
SHATTER PROOF.
4 TEETH PER INCH.
HEAVY DUTY BACKING PLATE
ITEM#:
V9108
DESCRIPTION:
8 PC ELECTRICIANS BI-METAL HOLE SAW KIT
CLASS # 14
13PC BI-METAL HOLE SAW KIT
You know how with your standard hole saws when you go through
hard metal, stainless steel or even wood embedded with nails you'll loose the
teeth or they dull up after one use, with these bi-metal hole saws you wont
have that problem.
These hole saws are constructed of a combination of high speed steel
and tungsten steel teeth. They have a cutting depth of an inch and a quarter
(1 1/4”), and are made by ‘Rule Industries’.
This a complete set of bi-metal hole saws. They go from 3/4" all the
way up to 2 1/2". You get the large and small mandrel adapter, the pilot bits
and the carrying case. All for one ridiculous price.
SPEC BOX
MADE BY SANDVIK, U.K.
BI-M ETAL CONSTRUCTION.
1 1/4" CUTTING DEPTH.
9 HOLE SAWS (3/4, 7/8, 1 1/8, 1 3/8, 1 1/2,
1 3/4, 2, 2 1/4, 2 1/2") 3 - PILOT BITS, 1 LG
MANDREL, 1 SM MAN. CARRY CASE.
SHATTER PROOF.
4 TEETH PER INCH.
HEAVY DUTY BACKING PLATE
ITEM#:
9596
DESCRIPTION:
13 PC BI-METAL HOLE SAW KIT
CLASS # 14
13 PC CARBIDE TIPPED HOLE SAW KIT
Each hole saw is carbide tipped, you could actually go through brick,
concrete, fiberglass, tile and asbestos board faster and cleaner than with a bimetal hole saw.
The set starts at 3/4" and goes all the way up to and includes the 2 1/2"
hole saw. You get the large and small mandrel adapter three pilot bits and a
high impact carrying case.
This a complete set of carbide hole saws, and they will out last your bimetal hole saws 3 to 1.
SPEC BOX
MADE BY SANDVIK. U.K.
1 1/2" CUTTING DEPTH.
CARBIDE TIPPED.
9 HOLE SAWS (3/4, 7/8, 1 1/8, 1 3/8, 1 1/2,
1 3/4, 2, 2 1/4, 2 1/2") 3 - PILOT BITS, 1 LG
MANDREL, 1 SM MAN. CARRY CASE.
SHATTER PROOF.
4 TEETH PER INCH.
HEAVY DUTY BACKING PLATE
ITEM#:
9597
DESCRIPTION:
13 PC CARBIDE TIPPED HOLE SAW KIT
CLASS # 14
14 PC INDUSTRIAL MAINTENANCE
HOLE SAW KIT
These are the ‘ACE Viper’ industrial bi-metal hole saws, you know
the ones that go through hard metal, stainless steel or even wood embedded
with nails. You'll never loose the teeth or dull these up after one use, they
are bi-metal, they never have that problem. They are constructed of a
combination of high speed steel and tungsten steel teeth.
This a complete set of hole saws, constructed with the most popular
hole saw sizes, they go from 3/4" all the way up to 3". You get the large and
small mandrel adapter, the pilot bits and the carrying case. All for one
ridiculous price.
SPEC BOX
MADE BY ACE INDUSTRIES U.S.A.
BI-METAL CONSTRUCTION.
1 1/4" CUTTING DEPTH.
11 HOLE SAWS (3/4", 7/8, 1, 1 1/4, 1 1/2, 1 3/4, 2, 2
1/4, 2 1/2, 3") 2 - PILOT BITS, 1 LG MANDREL, 1
SM MAN. CARRY CASE.
SHATTER PROOF.
4 TEETH PER INCH.
HEAVY DUTY BACKING PLATE
ITEM#:
DESCRIPTION:
V9114
14 PC ELECTRICIANS BI-METAL HOLE SAW KIT
CLASS # 14
CARBIDE TIPPED HOLE SAWS
Carbide tipped hole saws are specially designed for easy cutting through
brick, concrete, fiberglass and tile and cut cleaner than bi-metal hole saws.
The individual sizes are available from 3/4” to 4-1/4” and feature heavy
duty steel backing plates and shatterproof bodies. They have a 1-1/2” cutting
depth, 4 teeth per inch and will out last bi-metal hole saws 3 to 1 in concrete
brick and masonry.
ITEM#:
CHS904
CHS905
CHS906
CHS908
CHS910
CHS912
CHS914
CHS916
CHS920
CHS923
CHS926
CHS929
CHS930
CHS934
CHS938
CHS939
CHS944
SIZE:
3/4”
13/16”
7/8”
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-3/4”
2”
2-1/4”
2-1/2”
2-3/4”
3“
3-1/2”
3-5/8”
4-1/4”
DESCRIPTION:
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CARBIDE TIPPED HOLE SAW
CLASS # 14
BI-METAL HOLE SAWS
These premium, professional quality bi-metal hole saws feature an M3 highspeed steel cutting edge and are electron beam welded to a tough steel backer. The
caps stand up to abuse and punishment, yet are lighter and easier to use than those
of competitors. Cutting depth is 1-1/2" (38mm). Arbor is required.
Features & Benefits
ƒ Positive rake teeth provides better chip clearance
ƒ 1 1/2" cutting depth will cut through a 2 x 4
ƒ Requires a separate arbor.
ƒ Variable pitch teeth reduces friction and heat
ƒ Expanded gullets allow for faster cutting and increased blade life
ƒ Better tooth match for better chip clearance and smoother cutting
ƒ Reinforced tooth flank makes teeth stronger for longer life and
resistance to tooth strippage.
ITEM#:
SIZE:
HS901
HS902
HS903
HS904
HS905
HS906
HS907
HS908
HS909
HS910
HS911
HS912
HS913
HS914
HS915
HS916
HS917
HS918
HS919
HS920
HS921
HS922
HS923
HS925
HS926
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
2”
2-1/8”
2-1/4”
ITEM#: SIZE:
HS927
HS928
HS929
HS930
HS931
HS932
HS933
HS934
HS935
HS936
HS937
HS938
HS939
HS940
HS941
HS942
HS943
HS944
HS945
HS946
HS947
HS948
HS950
HS951
2-5/16”
2-3/8”
2-1/2”
2-9/16”
2-5/8”
2-3/4”
2-7/8”
3”
3-1/8”
3-1/4”
3-3/8”
3-1/2”
3-5/8”
3-3/4”
3-7/8”
4”
4-1/8”
4-1/4”
4-3/8”
4-1/2”
4-3/4”
5”
5-1/2”
6”
CLASS # 14
ACE VIPER HOLE SAWS
ACE Viper hole saws feature a high speed, M3 steel cutting edge and are
electron beam welded to a spring steel back with a Rockwell hardness rating
of 34-66. They’re professional grade hole saws that have a 4/6 variable tooth
pitch for superior performance and will cut stainless steel, pipe, wood plastic
and any other machinable material.
They have a deep 1-3/8” cutting depth for versatility and cooling slots to
prevent warping and to provide a true cutting diameter. They’re shatterproof
and accept standard hole saw arbors. Mandrels not included. USA made.
ITEM#:
VHS901
VHS902
VHS904
VHS906
VHS908
VHS910
VHS912
VHS913
VHS914
VHS916
VHS918
VHS920
VHS922
VHS923
VHS925
VHS926
VHS928
VHS929
VHS931
SIZE:
9/16”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-3/16”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
2-5/8”
ITEM#:
VHS932
VHS933
VHS934
VHS935
VHS936
VHS937
VHS938
VHS939
VHS940
VHS941
VHS942
VHS943
VHS944
VHS945
VHS946
VHS947
VHS948
VHS949
VHS950
SIZE:
2-3/4”
2-7/8”
3”
3-1/8”
3-/4”
3-3/8”
3-1/2”
3-5/8”
3-3/4”
3-7/8”
4”
4-1/8”
4-1/4”
4-3/8”
4-1/2”
4-3/4”
5”
5-1/2”
6”
CLASS # 14
MANDRELS & PILOT BITS FOR HOLE SAWS
These are hex shank mandrels for hole saws. The hex shank prevents
slippage in chuck. Each mandrel comes with 1 pilot bit. The mandrels come
in two sizes - small and large. The small mandrel has a 7/16 hex shank and
fits hole saws from 9/16”-1 13/16”. The large mandrel has a 3/8” hex shank
and fits hole saws from 1 1/4”-6”.
ITEM#:
DESCRIPTION:
45313 SMALL MANDREL FOR HOLE SAWS
45318 LARGE MANDREL FOR HOLE SAWS
SMPB MANDREL PILOT BIT
LGPB MANDREL PILOT BIT
1/4” DIAM. (9/16”-1 3/16”)
1/4” DIAM. (1 1/4”-6”)
CLASS 14
5-3/8” CARBIDE SAW BLADE
These general purpose and trimming blades have been designed for quick,
clean cutting with select portable saws. They are ideal for cutting all types of
hardwood, softwood and plywood.
The super thin kerf and aggressive hook angle allows for faster and easier
cuts as well as extended battery life on cordless machines. The long lasting,
micro grain carbide tips are precision ground to ensure the best possible cut.
Specifications:
•
•
•
•
•
•
•
Super thin kerf for fast cuts
5-3/8” x 24 Teeth x 20mm arbor
Professional grade carbide
Expansion slots prevent warping
Anti-kickback tooth design
Aggressive hook angle
Precision ground carbide tips
ITEM #:
B73518
DESCRIPTION:
5-3/8” CARBIDE TRIMMING BLADE
CLASS # 14
TENRYU ALUMINUM CUT BLADES
These carbide tipped blades are made to cut aluminum, without bogging
down and loading up. They give you a super clean cut in any grade
aluminum plate, bar, or rod. The material stays cool and ready to use right
after cutting because all the heat is transferred to the blade. Also, there is no
de-burring, all the edges are ready to use. It’s the only blade on the market
like it.
These blades are made to fit the popular contractor saws such as 7 1/4”.
They cut more accurately and last longer than cutoff wheels, band saw
blades, and sawsall blades, and, they’re faster, because you actually mill out
the metal by pushing through the material quickly. IMPORTED
ITEM#:
TAC760
DESCRIPTION:
TENRYU 7 1/4”x 60 TH. ALUM. CUT BLADE
CLASS # 14
TENRYU METAL CUTTING BLADES
‘Tenryu’ is the World’s leader in cutting metal with carbide tipped saw
blades. Their “Steel-Pro” saw blades are designed for use on handheld
circular saws, cordless saws, and low rpm dry-cut chop saws. These blades
are capable of making cuts in up to 1/4” steel 30 times faster than a chop
saw and they’ll last 100 times longer than an abrasive cutoff wheel. So, if
you’re doing steel framing, or other on-site multiple cutting of steel, then
these blades are the answer.
They’re capable of cutting 26 gauge sheet metal true and flat, without
any burrs. Or, you can cut 2” threaded rod and put a nut right onto it, no
deburring and no waiting. There’s no heat build-up, so you can handle any
material you cut right away. There’s no cloud of dust emitted into the air,
and hardly any spark so OSHA will love you. But, the big savings is that
they are very fast cutting with few blade changes. Also, besides steel, you
can make occasional cuts in almost any material: wood, pvc pipe, aluminum,
copper, brass, etc. MADE IN JAPAN
ITEM#:
TSB738
TSB748
TSB530
TSB550
TSB1260
TSB1472
SIZE:
7 1/4”x 38 TOOTH
7 1/4”x 48 TOOTH
5 3/8”x 30 TOOTH
5 3/8”x 50 TOOTH
12”x 60 TOOTH
14”x 72 TOOTH
DESCRIPTION:
TENRYU STEEL BLADE w/5/8”diam.k/o
TENRYU STEEL BLADE w/5/8”diam.k/o
TENRYU STEEL BLADE w/10 mm arbor
TENRYU STEEL BLADE w/10 mm arbor
TENRYU STEEL BLADE w/1” arbor
TENRYU STEEL BLADE w/1” arbor
CLASS # 14
6 TOOTH ‘FIBER FORCE’ BLADE
These are the new fiber-cement blades that are 6 tooth, 7 1/4” for your
circular saws. This is the blade of choice for cutting any type of sheet rock,
fiber-cement board, or any other “float” or back board. Our masonry
contractors are calling us back for more of these quick-cutting, long-lasting
blades. They are carbide tipped with the 5/8” universal arbor. Made by
Amana/Timberline.
ITEM#:
DESCRIPTION:
141
7 1/4” X 6 th CARBIDE FIBER BOARD BLADE
CLASS # 14
NEIKO 8 PC. MASONRY HOLE SAW SET
This set of 8 hole saws will give you easy drilling in masonry, concrete
blocks, ceramic tiles, and any composite bricks. They are not, however, for
granite. They have an impregnated layer of tungsten carbide particles on the
cutting edge instead of carbide teeth, so they will sink right through masonry
materials.
The set includes an aluminum stabilizing plate, one half round file, a
center drill, and 5 hole saws, with about a 2 1/2” depth of cut (55 mm). They
will fit any electric drill and are rated at 500 rpm. IMPORT
Sizes:
1-5/16”
2-1/16”
2-5/8”
2-7/8”
3-1/4”
ITEM#:
N113
DESCRIPTION:
NEIKO 8 PC. CARBIDE GRIT HOLE SAW KIT
CLASS # 14
ALUMINUM CUTTING BLADES
Our new line of Oshlun® blades are serious business! These aluminum
and non ferrous metal cutting blades feature a triple chip grind and special C-1
carbide tips as well as copper plugged expansion slots for quieter cutting.
These blades are ideal for cutting aluminum, brass, bronze, copper and
other non ferrous metals. All Oshlun® blades are made to give the best value
per dollar and best performance in the market. Imported.
12” x 120 Tooth - 1” Arbor
10” x 100 Tooth – 5/8” Arbor
7-1/4” x 60 Tooth – 5/8” w/ Diamond Knockout
ITEM#:
DESCRIPTION:
AAB7
7-1/4” x 60 TOOTH ALUMINUM CUT BLADE
AAB10
10” x 100 TOOTH ALUMINUM CUT BLADE
AAB12
12” x 120 TOOTH ALUMINUM CUT BLADE
RPM:
8,300
5,800
5,000
CLASS # 14
A.G.E. CARBIDE SAWBLADES
Amana® carbide blades start with the finest virgin German steel sheets
that are flattened through a special machine and then hand checked to ensure
that each sheet is perfectly flat.
The sheets are then laser cut, not stamped like other manufacturers, and
each blade is heat treated for strength. Tension rings are applied to maintain
straightness under the stress of operation and large, carbide tips are applied
and brazed electronically by sophisticated computer controlled equipment.
The blade is then sand blasted and laser etched and all carbide teeth are
ground to a specified geometry. This American/German engineering makes
these blades some of the most popular and competitive blades on the market.
All 10” blades have a 5/8” bore and 12” blades have a 1” bore. Made in
Germany. Industrial quality.
ATB (Alternate Top Bevel) for excellent results when ripping or
crosscutting soft and hardwoods and plywood.
ITEM#:
AG1040
AG1060
AG1080
AG1248
AG1260
AG1280
AG1296
SIZE:
10” x 40 TH
10” x 60 TH
10” x 80 TH
12” x 48 TH
12” x 60 TH
12” x 80 TH
12” x 96 TH
DESCRIPTION:
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
A.G.E. SAW BLADE - ATB
TCG (Triple Chip Grind) are specifically designed for clean cuts in plywood
and single-sided laminates, MDF, and chipboard.
AGTC1040
AGTC1060
AGTC1080
AGTC1272
AGTC1296
10” x 40 TH
10” x 60 TH
10” x 80 TH
12” x 72 TH
12” x 96 TH
A.G.E. SAW BLADE - TCG
A.G.E. SAW BLADE - TCG
A.G.E. SAW BLADE - TCG
A.G.E. SAW BLADE - TCG
A.G.E. SAW BLADE - TCG
4 & 1 Grind Negative Hook for glass smooth miter cuts on molding
materials using a miter saw.
AGM1080 10” x 80 TH A.G.E. SAW BLADE- 4/1 GRIND
AGM12100 12” x 100 TH A.G.E. SAW BLADE- 4/1 GRIND
Thin Kerf 4 & 1 Grind Negative Hook for glass smooth miter cuts on soft
and hardwoods using a sliding compound miter saw.
AGCM1060 10” x 60 TH
AGCM1272 12” x 72 TH
A.G.E. SAW BLADE-THIN KRF
A.G.E. SAW BLADE-THIN KRF
CLASS # 14
MELAMINE SAW BLADES
A.G.E saw blades (American German Engineering) by Amana Tool are
designed for mid size cabinet shops as well as professional hobbyists. These
saw blades are industrial quality, but at a great value.
They feature massive, precision ground, steel plates for tight clearance
tolerances, as well as laser cut expansion slots which allow blade to expand
and contract from heat to prevent warpage, and extra large carbide tips for a
longer life and more resharpenings.
This blade is designed especially for glass smooth compound miter cuts
in moldings and picture frame stock for use in a miterbox and single/double
miter machines.
This blade is perfect for picture frame and millwork shops and unlike a
thinner miter blade, which has a tendency to flex and warp, throwing off the
miter joint, this blade is stiffer and provides clean burr-free cuts in wood and
yield perfect gap free miters every time!
10” x 80 Teeth x 5/8” Bore
ITEM#:
AGMD1080
AGMD1296
12” x 96 Teeth x 1” Bore
DESCRIPTION:
10” x 80 TEETH MELAMINE SAW BLADE
12” x 96 TEETH MELAMINE SAW BLADE
CLASS # 14
METAL CUTTING BLADES
These Oshlun® blades are serious business! These are thin ferrous metal
cutting blades that feature a triple chip grind and C-6 micro grain carbide tips.
They will cut through all types of mild steel, such as angle iron, studs, piping,
tubing, channel, flat stock, rebar and more.
The special carbide tips resist breakage and will last longer than ordinary
abrasive discs and other carbide grades. They make a much cleaner, faster cut,
without the sharp burrs that abrasive discs leave behind. Imported.
ITEM#:
ASB6
ASB7
ASB8
ASB10
ASB12
ASB1480
ASB14
DESCRIPTION:
6-1/2” x 48 TOOTH x 5/8” / DIAMOND ARBOR
7-1/4” x 36 TOOTH x 5/8” / DIAMOND ARBOR
8” x 48 TOOTH x 5/8” / DIAMOND ARBOR
10” x 80 TOOTH x 5/8” ARBOR
12” x 100 TOOTH x 1” ARBOR
14” x 80 TOOTH x 1” ARBOR
14” x 120 TOOTH x 1” ARBOR
RPM:
4,600
5,800
5,800
5,200
2,000
1,800
1,800
CLASS # 14
PORTA BANDSAW BLADES
The multi purpose tooth shape on these bandsaw blades provides excellent
cuts in a variety of applications. Tough, impact resistant teeth deliver a long
life as well as exceptionally clean cuts on a wide range of materials.
The unique design on these blades provides hand held machines with fast
cutting, easy feeding, exceptional control and precision cuts on a variety of
materials, and they are perfect for cutting stainless steel, angle iron, chrome,
bronze, copper, aluminum, brass, galvanized pipe, and mild steel.
These blades are the standard, most common length for portable bandsaws
in the two most popular tooth configurations.
ITEM#:
SIZE/TPI:
DESCRIPTION:
PB441014 44-7/8” x 10/14 BAHCO BANDSAW BLADES
PB441418 44-7/8” x 14/18 BAHCO BANDSAW BLADES
CLASS # 14
RECIPROCATING BLADES
Built using the most advanced alloys and teeth designs, these BAHCO by
Snap-On® reciprocating blades combine high strength and shatter resistance
with greater cutting power and control. That’s why they let you make faster,
cleaner and more accurate cuts, time after time.
The BAHCO by Snap-On® line of reciprocating sawblades is truly unique
and with a wide range of lengths and toothings, there’s a blade that’s perfect
for every application. Bi-metal and .035 thickness for straight and rapid cuts
in metal, plastic, wood and wood with nails. Made in Sweden.
ITEM#:
6BM
6BM14
6BM24
6BMW
SIZE/TPI:
6” x 18 TPI
6” x 14 TPI
6” x 24 TPI
6” x 5/8 TPI
DESCRIPTION:
BAHCO RECIP BLADES
BAHCO RECIP BLADES
BAHCO RECIP BLADES
BAHCO RECIP BLADES
USE:
METAL
METAL
METAL
WOOD
9BM
9BMW
9B812
9” x 14 TPI
9” x 6 TPI
9” x 8/12 TPI
BAHCO RECIP BLADES
BAHCO RECIP BLADES
BAHCO RECIP BLADES
METAL
WOOD
12B812 12” x 8/12 TPI
12BM
12” x 14 TPI
12BMW 12” x 6 TPI
BAHCO RECIP BLADES
BAHCO RECIP BLADES
BAHCO RECIP BLADES
METAL/WOOD
METAL/WOOD
METAL
WOOD
DEMOLITION BLADES
These BAHCO by Snap-On® reciprocating blades combine high strength
and shatter resistance with greater cutting power and control. They’re tough
bi-metal blades made of high speed steel, beam-welded onto flexible, spring
steel backings and feature a 0.62” thickness for quick ripping into metal and
wood with large dimension nails.
The ‘Pallet’ cutting blades feature a combination 10/14 tooth design and
a .050” thickness for fast and easy ripping through wood with nails found in
commercial load pallets.
These blades are a staple in any commercial shipping company, farms or
produce transport, harbors, city maintenance and any other industry involved
in demolition on metal, wood or nail embedded wood. Made in Sweden.
ITEM#:
SIZE/TPI:
6BMD 6” x 5/8 TPI
DESCRIPTION:
BAHCO RECIP BLADES
USE:
DEMOLITION
9BMD
9PB
BAHCO RECIP BLADES
BAHCO RECIP BLADES
DEMOLITION
PALLET CUT
BAHCO RECIP BLADES
DEMOLITION
9” x 5/8 TPI
9” x 10/14 TPI
12BMD 12” x 5/8 TPI
CLASS # 14
14” RESCUE SAW BLAD E
The new 14” ‘Rescue’ blade from Bosch® is being marketed first to Fire
Departments, Police Departments, and all Search and Rescue agencies. They
have 24 oversized C-2 ‘Dyanite’, impact resistant, carbide tips, and standard
1” arbors. The tips have a .144 kerf thickness, and a -15° hook angle.
These blades are laser cut from .110 thick, true running, ultra flat plates,
and fully hardened. They’re rated at 4500 RPM for hand held gas saws only.
They are designed to cut wood, nail-embedded wood, and composition
materials. They are not meant to cut metal or masonry, however they can be
used for occasional light metal cutting, like salvage yards. These blades are
great for remodeling contractors and demolition contractors. Carrying case
included USA MADE
ITEM#:
PRO1424
DESCRIPTION:
14” BOSCH RESCUE SAW BLADE
CLASS # 14
‘POWER CHANGE’ HOLE SAW KIT
This is a 12 piece, deep-cut, Bi-Metal Hole Saw Kit with the new fast
cutting, ‘Progressor’ tooth design and only one mandrel is all you need with
the Bosch® Power Change bi-metal hole saw system. A heavy-duty 1/4” hex
shank and positive lock system provide easy change of any size hole saw; no
pliers needed.
Also included in this kit is the 13 piece ‘Rapid Feed’ Spade Bit set in a
folding cloth pouch. These bits have self-feed tips that bite into the material
where you put the bit, there is no ‘running’. 25 pieces altogether and both by
Bosch®.
Hole Saw Kit Includes:
•
•
•
•
Sizes: 3/4”, 7/8”, 1”, 1-1/8”, 1-3/8”,
1-1/2”, 1-3/4”,2”, 2-1/8”, 2-1/2”, & 3”
1 Mandrel
1 Pilot Bit
Carrying Case
ITEM#:
BPC11MPR
Spade Bit Set Includes:
•
•
Sizes: 1/4”, 3/8”, 1/2”, 9/16”, 5/8”,
1-1/16”, 3/4”, 7/8”, 1”, 2-1/8”,
1-1/4”, 1-3/8”, & 1-1/2”
Carrying Pouch
DESCRIPTION:
BOSCH 25 PC. POWER CHANGE SYSTEM
CLASS # 14
STAINLESS STEEL RECIP. BLADE
Bosch makes the right blade for the job! If you have stainless steel to cut,
you know that it’s a tough metal, and keeping a “straight cut” is difficult.
These new Bosch reciprocating blades are the perfect choice for cutting
stainless steel. They are engineered with tungsten carbide edges for straight
cuts in most any metal, and fiberglass. But, this is the only blade to use in
stainless steel when you need fast, even cuts. These are 4 1/2” working
length and 18 TPI.
* THESE ARE SPECIALTY BLADES SOLD IN PACKS OF TWO (2) ONLY
Made in Switzerland
ITEM#:
BSS4
DESCRIPTION:
2-PACK BOSCH STAINLESS STEEL RECIP. BLADE
CLASS # 14
BOSCH JIG SAW BLADES
We move a lot of blades to the service industries all over the country, and
one blade they keep asking us for is Bosch’s progressive cut jigsaw blade. We
carry them in both the common universal U-shank that will fit almost all saws
like Skil, Dewalt, Ryobi, Makita, and many more.
Also available with Bosch ‘T’-shank. The teeth are configured to cut both
precisely and easily in conventional and specialized materials, or with reverse
teeth, (reverse tang), which are specially designed for cutting laminates.
ITEM#:
SIZE:
DESCRIPTION:
UTWOOD 3-5/8” x 6 TPI U-SHANK JIGSAW BLADE
UTMETAL 3-5/8” x 24 TPI U-SHANK JIGSAW BLADE
BTWOOD 3-5/8” x 24 TPI T-SHANK
BTMETAL 3-5/8” x 14 TPI T-SHANK
BTJIGR
JIGSAW BLADE
JIGSAW BLADE
3-5/8” x 10 TPI REVERSE TANG JIGSAW BLADE
CLASS # 14
HOLE SAW KITS
MK Morse® hole saw kits keep all the sizes that pros need within easy
reach. These hole saws are a premium, professional quality with an M3 high
speed steel cutting edge, electron beam welded to a tough steel backer.
Caps stand up to abuse and punishment, yet are lighter and easier to use
than any other brands. The positive rake tooth design provides for better chip
clearance as teeth cut into wood, plastic, or any machinable metal. A 1-1/2”
cutting depth cuts easily through a 2 x 4.
These specialized kits come complete with the arbors and pilot bits and
store neatly in their own carrying case. These are the only hole saw kits good
enough to be called ‘Morse®’.
25 PC. ‘M IGH TY M ASTER’ BI-M ETAL
9 PC. ELECTRICI AN BI-M ETAL
Sizes:
3/4”, 7/8”, 1”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”
2”, 2-1/8”,2-1/4”, 2-1/2”, 2-11/16”, 3”, 3-1/4”,
3-3/8”, 3-5/8”, 3-3/4”, 4-1/8”, 4-1/2”, 4-3/4”
Sizes:
7/8”, 1-1/8”, 1-3/8”, 1-3/4”, 2”, 2-1/2”
Includes:
2 Arbors - 3/8”, 7/16” with Pilot Drills
12” Extension - Metal Case
Includes:
2 Arbors - 7/16” with Pilot Drills
Blow Mold Case
ITEM#: MKHS1
ITEM#: MKHS2
13 PC. M AS TER ELECTRICIAN BI-M ET.
13 PC. M AINTENANCE BI-M ETAL
Sizes:
7/8”, 1-1/8”, 1-3/8”, 1-3/4”, 2”, 2-1/2”, 3”,
3-5/8”, 4-1/8”, 4-1/2”
Sizes:
3/4”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”,
2-1/4”, 2-1/2”
Includes:
2 Arbors - 3/8”, 7/16” with Pilot Drills
Metal Case
Includes:
2 Arbors - 3/8”, 7/16” with Pilot Drills
12” Extension - Blow Mold Case
ITEM#: MKHS3
ITEM#: MKHS4
9 PC PLUM BERS BI M ETAL
13 PC. CARBIDE TI PPED
Sizes:
3/4”, 7/8”, 1-1/8”, 1-1/2”, 1-3/4”, 2-1/4”
Sizes:
3/4”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”,
2-1/4”, 2-1/2”
Includes:
2 Arbors - 3/8”, 7/16” with Pilot Drills
Blow Mold Case
Includes:
3 Arbors - 1/4”, 3/8”, 7/16” with Pilot Drills
12” Extension - Blow Mold Case
ITEM#: MKHS5
ITEM#: MKHS6
CLASS # 14
PLUMBER’S HOLE SAW KIT
The Morse® Plumber’s hole saw kits include all the hole saw sizes used
by professional plumbers. This kit features 13 bi-metal hole saws for smooth
cutting action with minimum vibration in stainless steel, plastic, wood, and
nail-embedded wood.
Also included are 9 carbide grit hole saws with a snag resistant, gullet
edge making them perfect for clean cuts in thin materials and hard materials
like cast iron, hardened steel, brick, cement, ceramics, computer flooring and
acoustic tile. Includes 2 arbors, 2 carbide tipped pilot drills, 2 pilot bits and a
metal storage case. Cuting depth is 1-1/2”. Made in USA.
Sizes:
• Bi-metal sizes: 3/4”, 7/8”, 1-1/8”, 1-1/2”, 13/4”, 2-1/4”, 2-1/8”, 2-9/16”, 3”, 3-1/2”, 4”,
4-1/4” & 4-1/2”
• Carbide grit sizes: 3/4”, 7/8”, 1-1/8”, 1-3/8”,
1-1/2”, 1-3/4”, 2”, 2-1/4” & 2-1/2”
ITEM#:
MKHS7
DESCRIPTION:
28 PC. PLUMBER’S HOLE SAW KIT
CLASS # 14
ELECTRICIAN’S HOLE SAW KIT
The Morse® Electrician’s hole saw kits include all the hole saw sizes
used by professional electricians. This kit features 16 bi-metal hole saws for
smooth cutting action with minimum vibration in stainless steel, plastic,
wood, and nail-embedded wood.
Also included are 9 carbide tipped hole saws for fast cuts in abrasive
materials including fiberglass, drywall, aluminum and countertops. Includes
2 arbors, 2 high speed steel pilot drills and a metal carrying case. Cutting
depth is 1-1/2”. Made in USA.
Sizes:
• Bi-metal sizes: 7/8”, 3/4”, 1”, 1-1/4”, 1-1/8”,
1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/2”, 2-11/16”, 3”,
3-5/8”, 4-1/8”, 4-1/2” & 4-3/4”
• Carbide tipped sizes: 3/4”, 7/8”, 1-1/8”,
1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4” & 2-1/2”
ITEM#:
MKHS8
DESCRIPTION:
29 PC. ELECTRICIAN’S HOLE SAW KIT
CLASS # 14
THIN WALL HOLE SAW SET
The hole saws in this 3 piece set from Bosch® feature a pilot spring around the
bit for automatic disk ejection. They are thin wall saws for fast and clean cutting of
sheet metal and a depth stopper prevents breakthrough to protect the work surface.
They are impact ready for use in all impact drivers with a 1/4” power bit and
the set includes 1 each of sizes 7/8”, 1-1/8” and 1-3/8” and they come in a plastic,
carrying case.
ITEM#:
BHTWS
DESCRIPTION:
BOSCH 3 PC. THIN WALL HOLE SAW SET
CLASS # 14
RECIPROCATING BLADES
MK Morse® has developed and refined a special manufacturing process
designed to lengthen the life of their blades. These professional quality, extra
tough reciprocating blades are for a wide variety of uses in wood, fiberglass,
metal, plastic, plaster and other common building materials.
Morse electron beam welds the Matrix II cutting edge to the backer so
that they can control the process and guarantee quality. The teeth are shock
resistant and resist strippage and the 8% Cobalt edge offers more resistance
to wear.
The Morse® demolition reciprocating blades are .050 thickness which is
a thicker, beefier blade that will not snap under harsh cutting conditions and
are preferred by muffler shops and demolition contractors. These ‘Bi-Metal’
blades are the only blades that are good enough to be called ‘Morse®’.
ITEM#:
SIZE:
MK318SC 3” x 18 TPI
DESCRIPTION:
MORSE RECIP SCROLL BLADES
MK41014
MK418
MK424
4” x 10/14 TPI
4” x 18 TPI
4” x 24 TPI
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MK606
MK614
MK618
MK624
6” x 6 TPI
6” x 14 TPI
6” x 18 TPI
6” x 24 TPI
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MKD618
6” x 18T x .050 MORSE DEMOLITION BLADES
MK81014
8” x 10/14 TPI
MORSE RECIPROCATING BLADES
MK906
MK918
9” x 6 TPI
9” x 18 TPI
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
MK1206
MK1218
12” x 6 TPI
12” x 18 TPI
MORSE RECIPROCATING BLADES
MORSE RECIPROCATING BLADES
CLASS # 14
DIAMOND DUST HOLE SAWS
These nickel plated hole saws feature a diamond particle coating on the
cutting edge which gives them a long life and superior performance. They’re
excellent for cutting through glass, marble, slate and tile.
Run wires without creating special fixes in your kitchen, bathroom and
other areas where drilling is difficult. The anti-heat slots on the sides prevent
over heating and prolong the life of the saw, and they have standard, round,
1/4” shanks.
5 PC. DIAMOND DUST
HOLE SAW SET (3/4” - 1-5/8”)
Sizes:
3/4”, 1”, 1-3/16”, 1-3/8” & 1-5/8”
5 PC. DIAMOND DUST
HOLE SAW SET (5/32” - 1/2”)
Sizes:
5/32”, 1/4”, 5/16”, 3/8” & 1/2”
ITEM#:
DESCRIPTION:
N170
5 PC. DIAMOND DUST HOLE SAWS
N171
5 PC. DIAMOND DUST HOLE SAWS
SIZES:
5/32” - 1/2”
3/4” - 1-5/8”
CLASS # 14
NEIKO 18 PC. BI-METAL HOLE SAW KIT
These are industrial grade, professional hole saw kits that’ll have you
covered for drilling any size hole up to 3 1/4”. They are bi-metal, meaning
the alloyed composite will hold its’ edge consistently over a long period and
cut through even the toughest materials. These are conveniently packaged
and stored in a compact carrying case, perfect to take anywhere without fear
of losing components. IMPORTED
Specs : 3/4", 7/8", 1", 1-1/8",1-1/4", 1-3/8", 1-1/2", 1-3/4",
2", 2-1/4", 2-1/2", 3", 3-1/4", 2 arbors, 2 drills, 1 extension
ITEM#:
N087
DESCRIPTION:
NEIKO 18 PC. BI-METAL HOLE SAW KIT
CLASS # 14
MULTI TOOL BLADES
These multi-fit, multi-tool blades are designed to fit many brands of oscillating
mult-tools including FEIN®, Dremel®, Skil®, Makita®, Bosch®, Craftsman® and
Miwaukee®.
ITEM#:
DESCRIPTION:
CARBIDE RECESSED SEGMENT
GROUT BLADE
MTB001
For removing old grout from tile joints as
well as thin set, mortar and cut grooves in
concrete. 2-1/2” x 0.090” thick.
DIAMOND SICKLE BLADE
MTB002
2-1/3”diamond sickle blade is great for
removing hard grout from ceramic tile.
Removal width is approximately 1/12".
Can plunge cut to approximately 2”
SEALANT CUTTER
MTB003
2-1/8” universal sealant cutter for removal
of virtually all caulking and sealants.
SEALANT CUTTER
MTB004
3” tapered sealant cutter for removal of
virtually all caulking and sealants in deep
joints.
BI-METAL UNIVERSAL BLADE
MTB005
1-1/3” bi-metal universal blade for plunge
cuts in sheet metal, copper pipes, wood
with nails, aluminum and plasterboard.
BI-METAL PRECISION BLADE
MTB006
1-1/3” bi-metal precision blade for plunge
cuts in drywall, soft plastics, hardwood
floors, trim, and laminated materials.
BI-METAL PRECISION BLADE
MTB007
2-2/3” bi-metal precision blade for plunge
cuts in drywall, soft plastics, hardwood
floors, trim, and laminated materials.
HSS CIRCULAR BLADE
MTB008
This 3-1/8” HSS universal blade is great
for cutting sheet metal, copper pipes,
aluminum profiles, PVC, wood with nails,
brass, bronze, and nearly all plastics.
HSS RECESSED SEGMENT BLADE
MTB009
This 3-1/8” HSS recessed segment blade
is great for cutting hardwood, softwood,
sheet metal, copper pipes, aluminum,
PVC, wood with nails, brass, bronze, and
nearly all plastics.
FLEXIBLE SCRAPER
MTB010
This 2” flexible scraper is great for
removing tile adhesive, paint, floor
coatings, caulking, stickers, and much
more.
RIGID SCRAPER
MTB011
This 2” rigid scraper is great for removing
tile adhesive, floor coatings, stickers,
paint, caulking, and much more.
CARBIDE TRIANGULAR RASP
MTB012
For grinding concrete, stone, wood, thin
set, and mortar. Works well removing
paint or epoxy coatings. 3-1/8”.
HCS STANDARD BLADE
MTB013
2-2/3” high carbon standard blade for
plunge and flush cuts in non metallic
materials, softwood, hardwood, particle
board, plywood, fiberglass, and nearly all
plastics including Plexiglass.
HCS STANDARD BLADE
MTB014
1-1/3” high carbon standard blade for
plunge and flush cuts in non metallic
materials, softwood, hardwood, particle
board, plywood, fiberglass, and nearly all
plastics including Plexiglass.
CLASS # 14
SKIL 7 1/4” x 24 TOOTH CARBIDE
SAW BLADE
These are Skil’s professional, contractor’s carbide tipped saw blade.
They are 24 tooth, with the diamond knockout in the arbor hole. You get all
the features of the most expensive blade on the market; welded carbide tips,
lightning holes for low heat and less friction wear.
These blades will not ‘chatter’ due to the high performance ‘balance’
they go through. These are the work day answer for framing and cross
cutting. They last 60 times longer than regular steel saw blades.
IMPORTED
ITEM#:
DESCRIPTION:
725
SKIL 7 1/4”x 24 TH CONTRACTOR’S C. T. BLADE
CLASS # 14
HACK SAW FRAME - USA
These are heavy duty tubular pipe hacksaw frames, made by Lenox. You
know how with your old style hacksaw frames if your blade falls off the work
you'd crush your fingers, that will never happen with this saw. It comes with a
fist guard. It also has more sawing clearance than a conventional saw.
SPEC BOX
MADE BY LENOX - U.S.A.
FOR USE WITH 12" BLADES ONLY.
HEAT TREATED PIPE TUBING.
5" CLEARANCE FROM BLADE TO TUBE.
ITEM#:
HSFRAME
DESCRIPTION:
12" USA PRO HACK SAW FRAME
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement