D9100 Series Data Sheet

D9100 Series Data Sheet
IFS® Line / Fiber Transmission
Specifications
D9100 Series
Data
Data Interface:
Data Rate:
Operating Mode:
Bit Error Rate:
Anti-Streaming Time-out:
RS-232 C/D, RS-422
DC - 100 Kbps
Asynchronous Simplex or Full-Duplex
<1 in 10˚ @ Maximum Optical Loss Budget
4, 8, 16, 32, 64 Seconds, or Infinity (disabled)
Number Of Fibers
2 In/2 Out
IFS RS-232/422 Drop and Repeat
nm or 1310 nm, Multimode: LED
Wavelength
Data
Transceivers 850
1310 nm, Single Mode: laser Diode
Connectors
Power:
OVERVIEW
Optical:
Terminal Block with Screw Clamps
ST, SC or FC
Type DB-25S
Data:
The IFS
D9100 Series consists of fully-digital transceiver units
Electrical & Mechanical
Power:
designed for implementing simplex or full-duplex RS-232 dropSurface Mount:
12 VDC @ 250 mA
and-repeat
signalization/communications
Rack: poll-and-respond traffic
From
Rack
Number of Rack Slots:
1 (2 slots required for units with ‘-B’ battery back-up option)
data networks
utilizing
two
optical
fibers.
These environmentallyCurrent Protection:
Automatic Resettable Solid-State Current Limiters
STANDARD FEATURES
Circuitunits
Board:are ideal for use inMeets
IPC Standard out-of-plant
hardened
unconditioned
Size (in./cm.) (LxWxH)
or roadside
and the master-configured
Surface installations
Mount:
7.0 x 4.9 x 1.0 in., 17.8 transceiver
x 12.5 x 2.5 cm
• Meets EIA RS-232 C/D Specifications (Simplex or Duplex)
Rack Mount:
7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm
unit may
be
located
anywhere
within
the
network,
making
this
Shipping Weight:
< 2 lbs./0.9 kg
• NTCIP Compatible
equipment ideal for applications involving on-street master
• Tested and Certified by an Independent Testing Laboratory for
Environmental
controllers
communications
MTBF: with upstream and downstream
> 100,000 hours
Full Compliance with the Environmental Requirements (Ambient
Operating Temp:
-40° C to +74° C
requirements.
The D9100 Series may
usedC in a conventional
Storage Temp:
-40° Cbe
to +85°
Operating Temperature, Mechanical Shock, Vibration, Humidity
Relative Humidity: local network
0% to
95% (non-condensing)†
single-master/multiple
architecture,
or in a dualwith Condensation, High-Line/Low-Line Voltage Conditions and
master/bus
local▲configuration for higher levels of
Battery multiple
Back-up Option
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Internal, Rechargeable Nickel Metal Hydride Battery, Operating Period: 12 Hours Minimum
communications reliability. Manually resettable anti-streaming is
Caltrans Specification for Traffic Signal Control Equipment.
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
included
for unparalleled network protection. Optional battery
• Robust Design Assures Extremely High Reliability In Unconditioned
▲Add suffix ‘-B’ to model number for battery back-up
back-up
capability provides the highest level of network reliability
Roadside Environments
in the event of a loss of local prime operating power, and maintains
• User-Selectable Local, Master or Bus operation and DTE or DCE
continuous communications channel operation. Plug-and-play
J
Interface Ensured Ease of Installation and Maximum Versatility
design ensures ease of installation and no electrical or optical
• Supports Request to Send (RTS) and Clear to Send (CTS) Signals
adjustments are ever required. LED indicators are provided for
• RJ-45 expansion port provides network branching capability by
units
Description rapidly ascertaining equipment operating
Fibers status,
Requiredand these
Opt.
Pwr.are
Budget
Max. Distance*
electrically
linking colocated transceiver units
available in either stand-alone or rack-mount configurations.
• Solid-State
Current Limiters on all Power Lines Provide Equipment
Repeater (850 nm, LED)
2.5 miles (4 km)
14 dB
Repeater (1310 nm, LED)
8 miles (13 km)
2 In/2 Out
Protection
23 dB
Repeater (1310 nm, Laser)
43 miles Internal
(69 km) Battery Back-up Provides additional
2 In/2 Out
• Optional
APPLICATION EXAMPLES
Operating Time in the Event of Loss of Prime Operating
Plug-in Power Supply (Included)
Power, and Maintains Continuous Channel Communications.
DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
• Access Control Systems
• Supports Single and Dual-Master/Bus Traffic Signal Controller
mber for R3 •
Rack
Mount - Automation
No Charge (Requires
R3 Rack purchased
separately)
Building
and Environmental
Control
Systems
Communication System Architectures
mber for SC Optical Connector (for single mode equipment only)
• Computer/Data
Equipment
mber for FC Optical
Connector (for single
mode equipment only)
•
Wide Optical Dynamic Range: Optical Attenuators are Never
y Coated Printed Circuit Boards (Extra charge, consult factory)
• FireOption
& Alarm Systems
H Battery Back-Up
Required
•and
ITSanyTraffic
Signalization
al loss of the fiber
additional
loss introduced byNetworks
connectors, splices and patch panels.
• User-Configurable Optical & Electrical Anti-Streaming Provides
**For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
Network Protection Against Faulty Streaming Controller Operation.
System Design
SYSTEM DESIGN
Master
Controller
• Comprehensive Lifetime Warranty
D9100E
up to 2.2 miles
(3.5 km)
D9100
D9100E
ifs
ifs
RS-232
ifs
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125µm MM
Typical traffic signalization network utilizing
single-master traffic signal controller and multiple
local controllers.
RS-232 master, drop and repeat to RS-232 locals.
2 single mode fibers, 42 miles (69 km)
Duplex 9/125 fiber
International
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
RS-232
Local
Controller
RS-232
Local
Controller
interlogix.com
D9100 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS RS-232/422 Drop and Repeat Data Transceivers
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
D9100
Repeater (850 nm, LED)
2 In/2 Out
14 dB
2.5 miles (4 km)
2 In/ 2 Out
23 dB
43 miles (69 km)
Single Mode 9/125µm
D9130
Repeater (1310 nm, Laser)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-B’ Suffix for NIMH Battery Back-Up Option
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Data
Data Interface:
RS-232 C/D, RS-422
Data Rate:
DC - 100 Kbps
Operating Mode:
Asynchronous Simplex or Full-Duplex
Bit Error Rate:
<1 in 10° @ Maximum Optical Loss Budget
Anti-Streaming Time-out:
4, 8, 16, 32, 64 Seconds, or Infinity (disabled)
Wavelength
850 nm or 1310 nm, Multimode: LED
1310 nm, Single Mode: laser diode
Number Of Fibers
2 In/2 Out
Connectors
Power:
Terminal Block with Screw Clamps
Optical:
ST
Data:
Type DB-25S
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
Electrical & Mechanical
Power:
Surface Mount:
12VDC @ 250mA
Rack:
From Rack
Number of Rack Slots:
1 (2 slots required for units with ‘-B’ battery back-up option)
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount:
7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm.
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C*
Storage Temp:
-40° C to +85° C*
Relative Humidity:
0% to 95% (non-condensing)
Battery Back-up Option 
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
PartNumber
Internal, Rechargeable Nickel Metal Hydride battery
 Add Suffix ‘-B’ to model number for battery back up
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
D9100 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement