Sendix 5006系列 不銹鋼光學式軸承型編碼器型錄

Sendix 5006系列 不銹鋼光學式軸承型編碼器型錄
Incremental Encoders
Standard
Stainless steel, shaft, optical
Sendix 5006 (Shaft)
Push-Pull / RS422
The Sendix incremental 5006 in stainless-steel offers optimum material resistance and thus virtually unlimited durability.
The high-grade Viton seals, the IP67 level of protection as well as
the wide temperature range additionally ensure impermeability and
ruggedness.
RoHS
2/22
Safety-LockTM
High rotational
speed
-40°... +85°C
IP
Temperature
range
High protection
level
High shaft load
capacity
Shock / vibration
resistant
Magnetic field
proof
Short-circuit
proof
Reverse polarity
protection
Optical sensor
Durable and sealed
Flexible in use
• Protection rating IP67
• Rugged stainless-steel housing
• Viton seals
• Wide temperature range -40 ... +85°C
• Sturdy bearing construction in Safety Lock™ Design for resistance against vibration and installation errors
• Compatible with all common US and European standards
• Supply voltage 5 ... 30 V DC,various interface options, max. 5000 PPR
• Compact dimensions:
Outer diameter 50 mm, installation depth max. 47 mm
Order code
Shaft version
8.5006 . X X X 4 . XXXX
Type
a b c d
e
a Flange
7 = clamping flange ø 58 mm [2.28“]
A = synchro flange ø 58 mm [2.28“]
63.5 mm [2.5“]
C = square flange c Output circuit / Power supply
2 =Push-Pull (7272 compatible with inverted signal) / 5 ... 30 V DC
5 = Push-Pull (with inverted signal) / 10 ... 30 V DC
4 = RS422 (with inverted signal) / 5 V DC
b Shaft (ø x L), with flat
1 = ø 6 x 10 mm [0.24 x 0.39“]
3 = ø 10 x 20 mm [0.39 x 0.79“]
8 = ø 3/8“ x 7/8“
d Type of connection
4 = M12 connector, 8-pin, radial
70
www.kuebler.com
e Pulse rate
360, 512, 1000, 1024, 2000, 2048, 2500,
3600, 4096, 5000
(e.g. 100 pulses => 0100)
Other pulse rates on request
© Fritz Kübler GmbH, subject to errors and changes. 08/2013
Incremental Encoders
Standard
Stainless steel, shaft, optical
Sendix 5006 (Shaft)
Push-Pull / RS422
Technical data
Output circuit
RS422 (TTL compatible))
Push-Pull Push-Pull (7272 compatible)
Power supply
5 V DC ±5%
10 ... 30 V DC
5 ... 30 V DC
Current consumption with inverted signal (no load)
typ. 40 mA / max. 90 mA
typ. 50 mA / max.100 mA
typ. 50 mA / max.100 mA
Permissible load/channel
max. ±20 mA max. ±20 mA max. ±20 mA
Pulse frequency
max. 300 kHz max. 300 kHz max. 300 kHz
Signal level min. 2.5 V max. 0.5 V min +V - 1 V max. 0.5 V min. +V - 2.0 V
max. 0.5 V
HIGH
LOW
Rising edge time tr max. 200 ns max. 1 μs max. 1 μs
Falling edge time tf max. 200 ns max. 1 μs max. 1 μs
yes yes
yes no
Short circuit proof outputs 1)yes 2) Reverse polarity protection of the power supply
no UL approval
File 224618
CE compliant acc. to EMC guideline 2004/108/EC
RoHS compliant acc. to guideline 2002/95/EC
Incremental
Encoders
Electrical characteristics
Mechanical characteristics
Speed 3) max. 6000 min-1
EX approval for hazardous areas optional Zone 2 and 22
approx. 1.8 x 10-6 kgm2
Moment of intertia
Working temperature -40°C ... +85°C
[-40°F ... +185°F]
Starting torque – at 20°C [68°F] < 0.05 Nm
Weight approx. 0.4 kg [14.11 oz]
Load capacity of shaft radial 80 N
axial 40 N
Material housing, flange, shaft stainless steel, 1.4305
connector stainless steel
sealsViton
Shock resistance acc. to EN 60068-2-27 2500 m/s2, 6 ms
Protection acc. to EN 60529 IP67
Vibration resistance acc. to EN 60068-2-6 100 m/s2, 10...2000 Hz
Terminal assignment
Output circuit Type of connection M12 connector, 8-pin
4
2, 4, 5
+V: 0 V: A, : B, : 0, :
PH H: Signal: Pin: 0 V
+V
A
B 0 H
12345 67 8
PH 4)
Encoder power supply +V DC
Encoder power supply ground GND (0 V)
Incremental output channel A
Incremental output channel B
Reference signal
Plug connector housing (Shield)
Top view of mating side, male contact base
3
4
2
8
5
6
1
7
M12 connector, 8-pin
1) If supply voltage correctly applied
2) Only one channel allowed to be shorted-out:
At +V = 5 V DC, short-circuit to channel, 0 V, or +V is permitted.
At +V = 5 ... 30 V DC, short-circuit to channel or 0 V is permitted.
3) For continuous operation max. 3000 min-1
4) PH = Shield is attached to connector housing
© Fritz Kübler GmbH, subject to errors and changes. 08/2013
www.kuebler.com
71
Incremental Encoders
Standard
Stainless steel, shaft, optical
Sendix 5006 (Shaft)
Push-Pull / RS422
Dimensions
Dimensions in mm [inch]
Synchro flange, ø 58 [2.28]
Flange type A
33,75 1,33
1 3 x M4, 6 [0.24] deep
42 [1,65]
72 2,83
D
50 h7 [1,97]
58 2,28
1
L
3x
12
0°
3 0,12
3 0,12
D =ø 6 h7 [0.24]
ø 10 f7 [0.39]
ø 3/8“ h8
4 0,16
47 1,85
Clamping flange, ø 58 [2.28]
Flange type 7
23,75 0,94
1
0
12
3x
L
48 [1,89]
72 2,83
D
36 1,42
58 2,28
1 3 x M3, 5.5 [0.21] deep
°
D =ø 6 h7 [0.24]
ø 10 f7 [0.39]
ø 3/8“ h8
10 0,39
63.5 [2.5]
www.kuebler.com
52,4 2,06
72 2,83
7,5 0,3
22
0,
72
L
5
5,
D =ø 6 h7 [0.24]
ø 10 f7 [0.39]
ø 3/8“ h8
D
63,5 2,5
26,25 1,03
31,75 1,25
Square flange,
Flange type C
37 1,46
7,1 0,28
39,5 1,56
© Fritz Kübler GmbH, subject to errors and changes. 08/2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement