1.1 Product Identifier: Versi-Tite 16 lb Cylinder Foam Sealant
1.2 Relevant identified uses of the substance or mixture and uses advised against:
General Use:
One Component Polyurethane Cylinder Foam Sealant
Uses Advised Against:
No further information available
1.3 Details of the supplier of the Safety Data Sheet:
RHH Foam Systems, Inc.
17100 W Victor Rd
New Berlin, WI 53151-4139 USA
1-800-657-0702 / 262-754-8088
1.4 Emergency telephone numbers:
Within the USA:
CHEMTREC (contract #18811) (24 hours) 1-800-424-9300
CHEMTREC (contract #18811) (24 hours) 001-703-527-3887
2.1 Classification of substance or mixture
Product definition: Mixture
Gases Under Pressure- Compressed Gas
Acute Toxicity Inhalation- Category 4
Skin Irritation- Category 2
Serious Eye Irritation- Category 2A
Respiratory Sensitizing- Category 1
Skin Sensitization – Category 1
Specific Target Organ Toxicity SE 3
Reproductive toxicity- Effects on or via lactation
Specific Target Organ Toxicity RE 2
Aquatic Chronic- Category 4
2.2 Label elements
Hazard Symbols:
Signal Word: WARNING
Hazard Statements:
H280- Contains gas under pressure; may explode if heated
H315- Causes Skin Irritation
H317- May cause an allergic skin reaction
H319- Causes Serious Eye Irritation
H332- Harmful if inhaled
H334- May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335- May cause respiratory irritation
H362- May cause harm to breastfed children
H373- May cause damage to organs through prolonged or repeated exposure
H413- May cause long lasting harmful effects to aquatic life
P102- Keep Out of Reach of Children
P202- Do not handle until all safety precautions have been read and understood
P251- Pressurized Container: Do not pierce or burn, even after use
P261- Avoid breathing vapors or fumes
P262- Do not get in eyes, on skin, or on clothing
P263- Avoid Contact during pregnancy or while nursing
Versi-Tite 16 lb Cylinder Foam Sealant
P age |2
P264- Wash hands and other skin areas exposed to material thoroughly after handling
P270- Do not eat, drink, or smoke when using this product.
P271- Use only outdoors or in a well-ventilated area
P273- Avoid release to the environment
P280- Wear protective gloves, protective clothing and eye protection
P285- In case of inadequate ventilation wear respiratory protection
P302+P352+P333+P313 IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical
P304+P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P314- Get medical advice if you feel unwell
P342+P311- If experiencing respiratory symptoms: Call a POISON CENTER or doctor
P403+P405- Store in a well-ventilated place. Store locked up.
P410- Protect from sunlight
P412- Do not expose to temperatures exceeding 122°F/50°C
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
There are not additional ingredients present which, within the current knowledge of the supplier and in the concentration applicable,
are classified as hazardous to the health or environment and hence require reporting in this section.
4.1 Description of first aid measures
Eye: Immediately flush eyes with large amounts of water for at least 15 minutes, holding the eyes open with fingers and
occasionally lifting the upper and lower lids. Use lukewarm water if possible. If present and easy to do so, remove contact
lenses, If irritation persists, get medical attention.
Skin: In case of contact, immediately flush skin with plenty of soap and water. Foam will stick to skin, gently wipe product
from skin with a damp cloth and wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash
clothing before reuse. Call a physician if irritation persists.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Obtain medical attention.
Ingestion: If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical advice/attention.
4.2 Most important symptoms and effects, both acute and delayed
Eye: May cause eye irritation.
Skin: May cause skin irritation. Symptoms may include redness, edema, drying, defatting and cracking of the skin. May
cause an allergic reaction. Prolonged skin exposure is unlikely to result in absorption of harmful amounts
Inhalation May be harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing
difficulties if inhaled. Inhalation of propellant may cause headache, lightheadedness and lethargy.
Versi-Tite 16 lb Cylinder Foam Sealant
P age |3
Ingestion: May be harmful if swallowed. May cause gastrointestinal irritation: stomach distress, nausea, or vomiting.
Chronic: Chlorinated paraffin (C14-C17) may cause harm to breastfed children. Refer to section 12.2
4.3 Notes to the physician
Symptoms may not appear immediately. If case of an accident or if you feel unwell, seek medical advice immediately
(show label or SDS if possible).
5.1 Extinguishing media
Suitable methods of extinction: Use dry chemical, carbon dioxide, foam, Halon 1211 and water spray or fog.
Unsuitable methods of extinction: Do not use water jets and high pressure water as these may spread the fire
5.2 Special hazards arising from the substance or mixture
Contains compressed gas. Eliminate all ignition sources. Closed containers may explode due to buildup of pressure when
exposed to extreme heat. Aerosol cans exposed to fire or high temperature can rupture and rocket. Cured foam will burn
in the presence of heat, oxygen and an ignition source.
5.3 Advice to firefighters
Products of combustion: May include and are not limited to: oxides of carbon, oxides of nitrogen, hydrogen fluoride, and
traces of hydrogen cyanide.
Keep upwind of fire. Wear full fire-fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA). Use water
spray to keep fire exposed containers cool. Containers may explode if heated.
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment recommended in Section 8. Isolate the hazard area and deny entry to unnecessary
and unprotected personnel. Eliminate sources of ignition.
6.2 Environmental precautions
Do not allow to enter sewers, drains, or waterways
6.3 Methods and materials for containment and cleaning up
Method for containment: Uncured product is very sticky; carefully remove the bulk of the foam by scraping it up and then
immediately remove the residue with a rag and solvent such as Versi-Solv, mineral spirits, acetone (nail polish remover),
paint thinner, etc. Once the product is cured it can only be removed mechanically by scraping, buffing, etc. Use
appropriate PPE.
Methods for cleaning up: Scoop up material and place in a disposal container. Dispose of as plastic waste in
accordance with all applicable guidelines and regulations. Vapors can accumulate in low areas. Provide ventilation
6.4 Reference to other sections
For indications about waste treatment, see Section 13
7.1 Precautions for safe handling
Pressurized container: do not pierce or burn, even after use. Container may explode if heated. Avoid contact with skin and
eyes. Do not breathe dust/fume/gas/mist/vapors/spray. Do not swallow. Use only in a well-ventilated area or outdoors.
Avoid welding or other “hot work” in the vicinity of exposed cured foam. When using do not eat, drink or smoke. (See
section 8) General hygiene advice: Launder contaminated clothing before reuse. Wash hands before eating, drinking or
7.2 Conditions for safe storage including any incompatibilities
Store in a dry place. Ideal use temperature is 65°F to 80°F (18°C to 27°C). Do not expose aerosol cans to open flame or
store at temperatures above 122°F (50°C). Excessive heat can cause premature aging of components resulting in a
shorter shelf life. Storage below 55°F (12.7°C) may affect foam quality if chemicals are not warmed to room temperature
before using. Protect containers from physical abuse. Keep containers upright. KEEP AWAY FROM CHILDREN.
8.1 Control Parameters
Versi-Tite 16 lb Cylinder Foam Sealant
P age |4
8.2 Exposure Controls:
Engineering measures: Use ventilation adequate to keep exposures below recommended exposure limits.
Eye/face Protection: Wear protective safety glasses with side shields or goggles.
Hand Protection: Use chemically resistant gloves (i.e. Nitrile gloves). Nitrile/butadiene rubber, butyl rubber, polyethylene,
PVC (vinyl), or neoprene gloves are also effective. Glove selection should take into account potential body reactions to
certain materials and manufacturer’s instructions for use. Break through time of selected gloves must be greater than the
intended use period.
Other Protective Equipment: Use clothing that protects against dermal exposure. Appropriate protective clothing varies
depending on the potential for exposure. To ensure proper skin protection, wear PPE in such a manner that no skin is
Respiratory Protection: If atmospheric levels are expected to exceed the exposure levels, use a NIOSH approved air
purifying respirator equipped with an organic vapor cartridge and particulate filter. If atmospheric levels exceed 10 times
the TLV or PEL level for which an air purifying respirator is effective, use a powered air purifying respirator (PAPR). The
type of respiratory protection selected must comply with the requirements set forth in OSHA’s Respiratory Protection
Standard (29 CFR1910.134).
Hygiene Measures: An eye wash station or portable eye wash station should be in the area.Wash hands thoroughly after
use, before eating, drinking, or using the lavatory. Employees/Users should be educated and trained in the safe use and
handling of this product.
10.1 Reactivity
No dangerous reaction known under conditions of normal use.
10.2 Chemical Stability
Stable under normal storage conditions. Contents under pressure. Container may explode if heated. Do not pierce or
burn, even after use. Avoid temperatures below 40°F (4°C). For longest shelf life, avoid storage above 100°F (38°C).
10.3 Possibility of Hazardous Reactions
Elevated temperatures can cause product to decompose, releasing carbon dioxide. Flammable propellant. Contents are
under pressure and exposure to high temperature can cause containers to rupture or explode.
10.4 Conditions To Avoid
Heat, incompatible materials, sources of ignition. Avoid temperatures below 40°F (4°C) or temperatures above 100°F
10.5 Incompatible Materials
Alcohols, strong bases, amines, metal compounds, ammonia, and strong oxidizers.
10.6 Hazardous Decomposition Products
May include, and are not limited to: oxides of carbon, oxides of nitrogen, hydrogen fluoride and traces of hydrogen cyanide.
Versi-Tite 16 lb Cylinder Foam Sealant
P age |5
11.1 Information on Toxicological effects:
Acute Oral Toxicity: Expected to have low acute oral toxicity
Acute inhalation toxicity: Expected to have low acute inhalation toxicity
Acute dermal toxicity: Expected to have low acute dermal toxicity
Skin irritation: Causes skin irritation
Eye irritation: Causes serious eye irritation
Sensitization: May cause skin and respiratory sensitization
Genotoxicity: Genetic toxicity data for MDI is inconclusive. Some in-vitro studies yielded positive results, while other test
data was negative
Mutagenicity: Test data using laboratory animals was predominately negative
Specific organ toxicity- single exposure: May cause respiratory irritation
Specific organ toxicity- repeated exposure: May cause damage to the lungs, central nervous system and skin
Aspiration hazard: No data available
11.2 Delayed, Immediate, and Chronic Effects of Short and Long Term Exposure
MDI and PMDI: IARC Group 3 carcinogen- Not classifiable as to its carcinogenicity to humans. Not listed as a carcinogen
by ACGIH, OSHA or NTP. MDI/PMDI did not cause birth defects in laboratory animals; fetal effects occurred only at high
doses which were toxic to the mother. Lung tumors have been observed in laboratory animals exposed to respirable
aerosol droplets of MDI/PMDI (6mg/m lifetime. Tumors occurred concurrently with respiratory irritation and lung injury.
Current exposure guidelines are expected to protect against these effects. Chlorinated paraffins (C14-C16) may
accumulate in body tissues and fluids rich in lipid content; therefore, this material may cause harm to breastfed children.
12.1 Ecotoxicity
The aquatic toxicity of this product has not been experimentally determined. However, it is expected to have low acute
aquatic toxicity based on the acute aquatic toxicity of the individual components and their concentration in this mixture.
12.2 Persistence and degradability
Product is not readily biodegradable. In aquatic and terrestrial environments, this material reacts with water, which forms
predominately insoluble polyureas.
12.3 Bioaccumulative potential
Bioaccumulation potential is low
12.4 Mobility in soil
Expected to have low mobility based on product’s reactivity with water
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other Adverse Effects
No data available
13.1 Waste Treatment Methods
Methods of disposal:
Before disposing of containers, relieve container of any remaining foam and pressure. Allow dispensed product to fully
cure before disposing. Never discard in a liquid state. This material must be disposed of in accordance with all local,
regional, national, international regulations.
Other disposal recommendations:
Do not puncture or incinerate containers. Use appropriate Personal Protective Equipment.
Versi-Tite 16 lb Cylinder Foam Sealant
P age |6
15.1 Safety, health, and environmental regulations/ legislations specific for the substance or mixture
U.S. Federal Regulations
OSHA Hazard Communication Standard: This material is classified as a hazardous in accordance with OSHA 29 CFR 1910-1200
TSCA Status: All components of this product are listed on the Toxic Substance Control Act (TSCA) Inventory. This product is not
subject to TSCA 12(b) Export Notification.
Superfund Amendments and Reauthorization Act (SARA)
SARA Section 311/312 Hazard Categories: Acute Health Hazard, Chronic Health Hazard, Reactive Hazard, Sudden Release of
Pressure Hazard
SARA 313 Information: MDI and PMDI are subject to reporting levels established by Section 313 of the Emergency Planning and
Community Right-to-Know Act of 1986.
SARA 302/304 Extremely Hazardous Substance: No components of the product exceed the threshold (de minimis) reporting
levels established by these sections of the Title III of SARA.
SARA 302/304 Emergency Planning & Notification: No components of the product exceed the threshold (de minimis) report levels
established by these sections of the Title III of SARA.
Comprehensive Response Compensation and Liability Act (CERCL
A): This product contains the following CERCLA reportable substances: 4,4’- Diphenylmethane diisocyanate (CAS #101-68-8), RQ2,268 kg (5,000 lbs).
Clean Air Act (CAA) - 4,4’- Diphenylmethane diisocyanate (CAS #101-68-8) is listed as a Hazardous Air Pollutant (HAP)
designated in CAA Section 112 (b). This product does not contain any Class 1 or Class 2 Ozone depletors.
Clean Water Act (CWA) - 4,4’- Diphenylmethane diisocyanate (CAS #101-68-8) is listed as a Hazardous Substance under the
CWA. None of the chemicals in these products are listed as Priority Pollutants under the CWA. None of the chemicals listed in
these products are listed as Toxic Pollutants under the CWA.
U.S. State Regulations:
California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986: This product contains trace amount of substances
known to the State of California to cause cancer or other reproductive harm.
Other U.S. State Inventories:
4, 4’- Diphenylmethane diisocyanate (CAS #101-68-8) is listed on the following State Hazardous Substance Inventories, Right-toKnow lists and/or Air Quality/air Pollutants lists: CA, DE, ID, IL, ME, MA, MN, NJ, PA, WA, WI
Polymeric MDI (CAS #9016-87-9) is listed on the following State Hazardous Substance Inventories, Right-to-Know lists and/or Air
Quality/Air Pollutants lists: DE, NJ, MN
1,1,1,2 Tetrafluoroethane (CAS #811-97-2) is listed on the following State Hazardous Substance Inventories, Right-to-Know lists
and/or Air Quality/Air Pollutants lists: ME, WI
WHMIS Hazard Symbol and Classification:
Canada Controlled Product Regulations (CPR): This product has been classified in accordance with the hazard criteria of the
Controlled Products Regulation, and the SDS contains all the information required by the Controlled Products Regulations.
Canadian Ingredient Disclosure List (IDL): 4,4’- Diphenylmethane diisocyanate (CAS #101-68-8) is listed on the IDL.
Canadian National Pollutant Release Inventory (NPRI): MDI and PMDI are listed on the NPRI
European Economic Community
Labeling (67/548/EEC or 1999/45/EC)
Xn- Harmful
Risk Phrases:
R20- Harmful by inhalation
R36/37/38- Irritating to eyes, respiratory system and skin
R40- Limited evidence of carcinogenic effect
R42/43- May cause sensitization by inhalation and skin contact
R48/20- Harmful: danger or serious damage to health by prolonged exposure through inhalation.
R64- May cause harm to breastfed babies
R53- May cause long-term adverse effects in the aquatic environment
Safety Phrases:
S1/2- Keep locked up and out of reach of children
S23- Do not breathe fumes, vapor, or mist
Versi-Tite 16 lb Cylinder Foam Sealant
P age |7
S36/37- Wear suitable protective clothing and gloves
S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label or this SDS where possible.
WGK, Germany (Water danger/protection): 1
Global Chemical Inventory Lists:
United States: Toxic Substance Control Act (TSCA)- Yes
Canada: Domestic Substances List (DSL)- Yes
Canada: Non-Domestic Substances List (NDSL)- No
Europe: Inventory of New and Existing Chemicals- (EINECS)- Yes
Australia: Australian Inventory of Chemical Substances (AICS)- Yes
New Zealand: New Zealand Inventory of Chemicals (NZLoC)- Yes
China: Inventory of Existing Chemical Substances in China (IECSC)- Yes
Japan: Inventory of Existing and New Chemical Substances (ENCS)- Yes
Korea: Existing Chemicals List (ECL)- Yes
15.2 Chemical safety assessment: For this product a chemical safety assessment was not carried out
NFPA: Health Hazard 2; Flammability 1; Reactivity 1
HMIS: Health Hazard 2; Flammability 1; Physical Hazard 1
Hazard Rating: 0=minimal, 1= slight, 2=moderate, 3=severe, 4= extreme
The information and recommendations set forth herein are presented in good faith and believed to be correct as of the date hereof.
The manufacturer makes no representations as to the completeness or accuracy thereof. Information is supplied upon the condition
that the persons receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the
manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information. No
representations or warranties, either expressed or implied, of merchantability or fitness for a particular use are made hereunder with
respect to this information or the product to which information refers.
Date of Preparation/Last Revision: May 26, 2015
Prepared by:
RHH Foam Systems Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF